This is the 6.6.51 stable release

-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAmbisF0ACgkQONu9yGCS
 aT5Y8xAAqS/rmrC+/qlFvbtAqK+KXLq9BIGvDHW2QHfCyMpSZ6isehVhh64apHE/
 /XvJ6a+2iPVp5o52iDTUKzbcDr3Jx/QwhS8Xa/HyQQy1rXIPpJNJb8Vuvkn/B2Cq
 cPCfTtfPZUUQTd09uAdBhy5NT8hsT2kSVpmSXDnahn9ih8k0tR40udw5Qf7xpWcf
 HqljbfonLP86mF/SB9m+VhDGF9fekujyb+0iS0OPE+TdvSjKB9ySoeL4PIeTSxrz
 goZdp9ygAYy8Bks825ztbfQszqIwceHU/xZRaUrGfOOk4A5kwTmbdUQu7ooMc+5F
 kbpifbewmY1UGn2KTxgj59xCjQ7HLQe+sqacy0/gALzRSajUNyjLn0n4w3UqaJWb
 pf+gwqHBLgDRfvWctggEdY2ApKgOlM9D7TTpWWB9uv1oR/g3PGfgehZgrMMPgPUw
 EZ8JiwnITfRaRFiH/vSR3aJKRj6qjb4mX3/U8HgGcACtyFfHgtuI7jzhnX36fRNO
 FG38bxSUMrJnlohghfBl6zyaruZBMHVaoQzs6MYZ7qrVvCbt3CHivJdaQ85nw0h7
 YHa2zYFfT0ztyaSMzWq6JatgI7BZfd8PjobhbRZADBBD39KC8aL8XLoDPnpzWMUY
 UDlK8n96gOKo0t8ILDWcIisCVGNogcHJlGppC8Fu7ZyKzYsMhN4=
 =OEL/
 -----END PGP SIGNATURE-----

Merge tag 'v6.6.51' into lf-6.6.y

This is the 6.6.51 stable release

* tag 'v6.6.51': (2369 commits)
  Linux 6.6.51
  Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync
  Bluetooth: hci_sync: Fix UAF on create_le_conn_complete
  ...

Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>

 Conflicts:
	arch/arm64/boot/dts/freescale/imx8mp.dtsi
	arch/arm64/boot/dts/freescale/imx93.dtsi
	drivers/dma/fsl-edma-common.c
	drivers/dma/fsl-edma-common.h
	drivers/dma/fsl-edma.c
	drivers/irqchip/irq-imx-irqsteer.c
	drivers/perf/fsl_imx9_ddr_perf.c
	drivers/spi/spi-fsl-lpspi.c
	sound/soc/sof/imx/imx8m.c

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -565,7 +565,8 @@ Description:	Control Symmetric Multi Threading (SMT)
 			 ================ =========================================
 
 			 If control status is "forceoff" or "notsupported" writes
-			 are rejected.
+			 are rejected. Note that enabling SMT on PowerPC skips
+			 offline cores.
 
 What:		/sys/devices/system/cpu/cpuX/power/energy_perf_bias
 Date:		March 2019

Documentation/admin-guide/cifs/usage.rst

@@ -722,40 +722,26 @@ Configuration pseudo-files:
 ======================= =======================================================
 SecurityFlags		Flags which control security negotiation and
 			also packet signing. Authentication (may/must)
-			flags (e.g. for NTLM and/or NTLMv2) may be combined with
+			flags (e.g. for NTLMv2) may be combined with
 			the signing flags.  Specifying two different password
 			hashing mechanisms (as "must use") on the other hand
 			does not make much sense. Default flags are::
 
-				0x07007
+				0x00C5
 
-			(NTLM, NTLMv2 and packet signing allowed).  The maximum
+			(NTLMv2 and packet signing allowed).  Some SecurityFlags
-			allowable flags if you want to allow mounts to servers
+			may require enabling a corresponding menuconfig option.
-			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed).  Some
-			SecurityFlags require the corresponding menuconfig
-			options to be enabled.  Enabling plaintext
-			authentication currently requires also enabling
-			lanman authentication in the security flags
-			because the cifs module only supports sending
-			laintext passwords using the older lanman dialect
-			form of the session setup SMB.  (e.g. for authentication
-			using plain text passwords, set the SecurityFlags
-			to 0x30030)::
 
 			  may use packet signing			0x00001
 			  must use packet signing			0x01001
-			  may use NTLM (most common password hash)	0x00002
-			  must use NTLM					0x02002
 			  may use NTLMv2				0x00004
 			  must use NTLMv2				0x04004
-			  may use Kerberos security			0x00008
+			  may use Kerberos security (krb5)		0x00008
-			  must use Kerberos				0x08008
+			  must use Kerberos                             0x08008
-			  may use lanman (weak) password hash		0x00010
+			  may use NTLMSSP               		0x00080
-			  must use lanman password hash			0x10010
+			  must use NTLMSSP           			0x80080
-			  may use plaintext passwords			0x00020
+			  seal (packet encryption)			0x00040
-			  must use plaintext passwords			0x20020
+			  must seal                                     0x40040
-			  (reserved for future packet encryption)	0x00040
 
 cifsFYI			If set to non-zero value, additional debug information
 			will be logged to the system error log.  This field

Documentation/admin-guide/kernel-parameters.txt

@@ -664,12 +664,6 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clocksource.max_cswd_read_retries= [KNL]
-			Number of clocksource_watchdog() retries due to
-			external delays before the clock will be marked
-			unstable.  Defaults to two retries, that is,
-			three attempts to read the clock under test.
-
 	clocksource.verify_n_cpus= [KNL]
 			Limit the number of CPUs checked for clocksources
 			marked with CLOCK_SOURCE_VERIFY_PERCPU that
@@ -4655,11 +4649,9 @@
 
 	profile=	[KNL] Enable kernel profiling via /proc/profile
 			Format: [<profiletype>,]<number>
-			Param: <profiletype>: "schedule", "sleep", or "kvm"
+			Param: <profiletype>: "schedule" or "kvm"
 				[defaults to kernel profiling]
 			Param: "schedule" - profile schedule points.
-			Param: "sleep" - profile D-state sleeping (millisecs).
-				Requires CONFIG_SCHEDSTATS
 			Param: "kvm" - profile VM exits.
 			Param: <number> - step/bucket size as a power of 2 for
 				statistical time based profiling.

Documentation/arch/arm64/silicon-errata.rst

@@ -119,32 +119,68 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #3324348        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #3324346,3324347| ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A720     | #3456091        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A725     | #3456106        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #3324346        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #3324335        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #3194386        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #3324334        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #3324336        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-600         | #1076982,1209401| N/A                         |

Documentation/bpf/map_lpm_trie.rst

@@ -17,7 +17,7 @@ significant byte.
 
 LPM tries may be created with a maximum prefix length that is a multiple
 of 8, in the range from 8 to 2048. The key used for lookup and update
-operations is a ``struct bpf_lpm_trie_key``, extended by
+operations is a ``struct bpf_lpm_trie_key_u8``, extended by
 ``max_prefixlen/8`` bytes.
 
 - For IPv4 addresses the data length is 4 bytes

Documentation/cdrom/cdrom-standard.rst

@@ -217,7 +217,7 @@ current *struct* is::
 		int (*media_changed)(struct cdrom_device_info *, int);
 		int (*tray_move)(struct cdrom_device_info *, int);
 		int (*lock_door)(struct cdrom_device_info *, int);
-		int (*select_speed)(struct cdrom_device_info *, int);
+		int (*select_speed)(struct cdrom_device_info *, unsigned long);
 		int (*get_last_session) (struct cdrom_device_info *,
 					 struct cdrom_multisession *);
 		int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
@@ -396,7 +396,7 @@ action need be taken, and the return value should be 0.
 
 ::
 
-	int select_speed(struct cdrom_device_info *cdi, int speed)
+	int select_speed(struct cdrom_device_info *cdi, unsigned long speed)
 
 Some CD-ROM drives are capable of changing their head-speed. There
 are several reasons for changing the speed of a CD-ROM drive. Badly

Documentation/devicetree/bindings/thermal/thermal-zones.yaml

@@ -49,7 +49,10 @@ properties:
       to take when the temperature crosses those thresholds.
 
 patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+  # Node name is limited in size due to Linux kernel requirements - 19
+  # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL
+  # byte):
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$":
     type: object
     description:
       Each thermal zone node contains information about how frequently it

Documentation/hwmon/corsair-psu.rst

@@ -15,11 +15,11 @@ Supported devices:
 
   Corsair HX850i
 
-  Corsair HX1000i (Series 2022 and 2023)
+  Corsair HX1000i (Legacy and Series 2023)
 
-  Corsair HX1200i
+  Corsair HX1200i (Legacy and Series 2023)
 
-  Corsair HX1500i (Series 2022 and 2023)
+  Corsair HX1500i (Legacy and Series 2023)
 
   Corsair RM550i
 

Documentation/kbuild/modules.rst

@@ -128,7 +128,7 @@ executed to make module versioning work.
 
 	modules_install
 		Install the external module(s). The default location is
-		/lib/modules/<kernel_release>/extra/, but a prefix may
+		/lib/modules/<kernel_release>/updates/, but a prefix may
 		be added with INSTALL_MOD_PATH (discussed in section 5).
 
 	clean
@@ -417,7 +417,7 @@ directory:
 
 And external modules are installed in:
 
-	/lib/modules/$(KERNELRELEASE)/extra/
+	/lib/modules/$(KERNELRELEASE)/updates/
 
 5.1 INSTALL_MOD_PATH
 --------------------
@@ -438,10 +438,10 @@ And external modules are installed in:
 -------------------
 
 	External modules are by default installed to a directory under
-	/lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
+	/lib/modules/$(KERNELRELEASE)/updates/, but you may wish to
 	locate modules for a specific functionality in a separate
 	directory. For this purpose, use INSTALL_MOD_DIR to specify an
-	alternative name to "extra."::
+	alternative name to "updates."::
 
 		$ make INSTALL_MOD_DIR=gandalf -C $KDIR \
 		       M=$PWD modules_install

Documentation/locking/hwspinlock.rst

@@ -85,6 +85,17 @@ is already free).
 
 Should be called from a process context (might sleep).
 
+::
+
+  int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id);
+
+After verifying the owner of the hwspinlock, release a previously acquired
+hwspinlock; returns 0 on success, or an appropriate error code on failure
+(e.g. -EOPNOTSUPP if the bust operation is not defined for the specific
+hwspinlock).
+
+Should be called from a process context (might sleep).
+
 ::
 
   int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);

Documentation/mm/page_table_check.rst

@@ -14,7 +14,7 @@ Page table check performs extra verifications at the time when new pages become
 accessible from the userspace by getting their page table entries (PTEs PMDs
 etc.) added into the table.
 
-In case of detected corruption, the kernel is crashed. There is a small
+In case of most detected corruption, the kernel is crashed. There is a small
 performance and memory overhead associated with the page table check. Therefore,
 it is disabled by default, but can be optionally enabled on systems where the
 extra hardening outweighs the performance costs. Also, because page table check
@@ -22,6 +22,13 @@ is synchronous, it can help with debugging double map memory corruption issues,
 by crashing kernel at the time wrong mapping occurs instead of later which is
 often the case with memory corruptions bugs.
 
+It can also be used to do page table entry checks over various flags, dump
+warnings when illegal combinations of entry flags are detected.  Currently,
+userfaultfd is the only user of such to sanity check wr-protect bit against
+any writable flags.  Illegal flag combinations will not directly cause data
+corruption in this case immediately, but that will cause read-only data to
+be writable, leading to corrupt when the page content is later modified.
+
 Double mapping detection logic
 ==============================
 

MAINTAINERS

@@ -13732,7 +13732,7 @@ M:	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
 M:	"Paul E. McKenney" <paulmck@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	arch/powerpc/include/asm/membarrier.h
+F:	arch/*/include/asm/membarrier.h
 F:	include/uapi/linux/membarrier.h
 F:	kernel/sched/membarrier.c
 

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 6
-SUBLEVEL = 36
+SUBLEVEL = 51
 EXTRAVERSION =
 NAME = Hurr durr I'ma ninja sloth
 

arch/arm/boot/dts/allwinner/Makefile

@@ -259,68 +259,6 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
 	sun8i-v40-bananapi-m2-berry.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-evb.dtb \
-	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-inet86dz.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
-	sun8i-a23-polaroid-mid2407pxe03.dtb \
-	sun8i-a23-polaroid-mid2809pxe04.dtb \
-	sun8i-a23-q8-tablet.dtb \
-	sun8i-a33-et-q8-v1.6.dtb \
-	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-inet-d978-rev2.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-olinuxino.dtb \
-	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb \
-	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-bananapi-m3.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-a83t-tbs-a711.dtb \
-	sun8i-h2-plus-bananapi-m2-zero.dtb \
-	sun8i-h2-plus-libretech-all-h3-cc.dtb \
-	sun8i-h2-plus-orangepi-r1.dtb \
-	sun8i-h2-plus-orangepi-zero.dtb \
-	sun8i-h3-bananapi-m2-plus.dtb \
-	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
-	sun8i-h3-beelink-x2.dtb \
-	sun8i-h3-libretech-all-h3-cc.dtb \
-	sun8i-h3-mapleboard-mp130.dtb \
-	sun8i-h3-nanopi-duo2.dtb \
-	sun8i-h3-nanopi-m1.dtb\
-	\
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb \
-	sun8i-h3-nanopi-r1.dtb \
-	sun8i-h3-orangepi-2.dtb \
-	sun8i-h3-orangepi-lite.dtb \
-	sun8i-h3-orangepi-one.dtb \
-	sun8i-h3-orangepi-pc.dtb \
-	sun8i-h3-orangepi-pc-plus.dtb \
-	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-orangepi-zero-plus2.dtb \
-	sun8i-h3-rervision-dvk.dtb \
-	sun8i-h3-zeropi.dtb \
-	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
-	sun8i-r16-bananapi-m2m.dtb \
-	sun8i-r16-nintendo-nes-classic.dtb \
-	sun8i-r16-nintendo-super-nes-classic.dtb \
-	sun8i-r16-parrot.dtb \
-	sun8i-r40-bananapi-m2-ultra.dtb \
-	sun8i-r40-oka40i-c.dtb \
-	sun8i-s3-elimo-initium.dtb \
-	sun8i-s3-lichee-zero-plus.dtb \
-	sun8i-s3-pinecube.dtb \
-	sun8i-t113s-mangopi-mq-r-t113.dtb \
-	sun8i-t3-cqa3t-bv3.dtb \
-	sun8i-v3-sl631-imx179.dtb \
-	sun8i-v3s-licheepi-zero.dtb \
-	sun8i-v3s-licheepi-zero-dock.dtb \
-	sun8i-v40-bananapi-m2-berry.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb

arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi

@@ -274,24 +274,24 @@
 
 		led@0 {
 			chan-name = "R";
-			led-cur = /bits/ 8 <0x20>;
+			led-cur = /bits/ 8 <0x6e>;
-			max-cur = /bits/ 8 <0x60>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <0>;
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		led@1 {
 			chan-name = "G";
-			led-cur = /bits/ 8 <0x20>;
+			led-cur = /bits/ 8 <0xbe>;
-			max-cur = /bits/ 8 <0x60>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <1>;
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		led@2 {
 			chan-name = "B";
-			led-cur = /bits/ 8 <0x20>;
+			led-cur = /bits/ 8 <0xbe>;
-			max-cur = /bits/ 8 <0x60>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <2>;
 			color = <LED_COLOR_ID_BLUE>;
 		};

arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi

@@ -5,31 +5,8 @@
 
 #include "imx6q.dtsi"
 #include "imx6qdl-kontron-samx6i.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Kontron SMARC sAMX6i Quad/Dual";
 	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
 };
-
-/* Quad/Dual SoMs have 3 chip-select signals */
-&ecspi4 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>,
-		   <&gpio3 25 GPIO_ACTIVE_LOW>;
-};
-
-&pinctrl_ecspi4 {
-	fsl,pins = <
-		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-		/* SPI4_IMX_CS2# - connected to internal flash */
-		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
-		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
-		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
-	>;
-};

arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi

@@ -244,7 +244,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
@@ -259,7 +260,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&ethphy>;
 
 	mdio {
@@ -269,7 +270,7 @@
 		ethphy: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <1000>;
 		};
 	};
@@ -464,6 +465,8 @@
 			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
 			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
 			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+			/* SPI4_CS3# - connected to SMARC SPI0_CS1# */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
 		>;
 	};
 
@@ -516,7 +519,7 @@
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x1b0b0 /* RST_GBE0_PHY# */
 		>;
 	};
 
@@ -729,7 +732,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
-	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
 };
 
 /* LCD_BKLT_PWM */
@@ -817,5 +820,6 @@
 	/* CPLD is feeded by watchdog (hardwired) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
 	status = "okay";
 };

arch/arm/boot/dts/rockchip/rk3066a.dtsi

@@ -123,6 +123,7 @@
 		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
 		power-domains = <&power RK3066_PD_VIO>;
 		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {

arch/arm/boot/dts/st/stm32mp151.dtsi

@@ -50,6 +50,7 @@
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
+		arm,no-tick-in-suspend;
 	};
 
 	clocks {

arch/arm/boot/dts/ti/omap/omap3-n900.dts

@@ -781,7 +781,7 @@
 
 		mount-matrix =	 "-1",  "0",  "0",
 				  "0",  "1",  "0",
-				  "0",  "0",  "1";
+				  "0",  "0",  "-1";
 	};
 
 	cam1: camera@3e {

arch/arm/include/asm/pgtable.h

@@ -158,6 +158,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
+#define pgdp_get(pgpd)		READ_ONCE(*pgdp)
+
 #define pud_page(pud)		pmd_page(__pmd(pud_val(pud)))
 #define pud_write(pud)		pmd_write(__pmd(pud_val(pud)))
 

arch/arm/include/asm/uaccess.h

@@ -133,16 +133,6 @@ extern int __get_user_64t_1(void *);
 extern int __get_user_64t_2(void *);
 extern int __get_user_64t_4(void *);
 
-#define __GUP_CLOBBER_1	"lr", "cc"
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define __GUP_CLOBBER_2	"ip", "lr", "cc"
-#else
-#define __GUP_CLOBBER_2 "lr", "cc"
-#endif
-#define __GUP_CLOBBER_4	"lr", "cc"
-#define __GUP_CLOBBER_32t_8 "lr", "cc"
-#define __GUP_CLOBBER_8	"lr", "cc"
-
 #define __get_user_x(__r2, __p, __e, __l, __s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
@@ -150,7 +140,7 @@ extern int __get_user_64t_4(void *);
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
 		: "0" (__p), "r" (__l)					\
-		: __GUP_CLOBBER_##__s)
+		: "ip", "lr", "cc")
 
 /* narrowing a double-word get into a single 32bit word register: */
 #ifdef __ARMEB__
@@ -172,7 +162,7 @@ extern int __get_user_64t_4(void *);
 		"bl	__get_user_64t_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
 		: "0" (__p), "r" (__l)					\
-		: __GUP_CLOBBER_##__s)
+		: "ip", "lr", "cc")
 #else
 #define __get_user_x_64t __get_user_x
 #endif

arch/arm/kernel/perf_callchain.c

@@ -85,8 +85,7 @@ static bool
 callchain_trace(void *data, unsigned long pc)
 {
 	struct perf_callchain_entry_ctx *entry = data;
-	perf_callchain_store(entry, pc);
+	return perf_callchain_store(entry, pc) == 0;
-	return true;
 }
 
 void

arch/arm/mach-davinci/pm.c

@@ -61,7 +61,7 @@ static void davinci_pm_suspend(void)
 
 	/* Configure sleep count in deep sleep register */
 	val = __raw_readl(pm_config.deepsleep_reg);
-	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
+	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK;
 	val |= pm_config.sleepcount;
 	__raw_writel(val, pm_config.deepsleep_reg);
 

arch/arm/mach-pxa/spitz.c

@@ -520,10 +520,8 @@ static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
+		GPIO_LOOKUP("sharp-scoop.1", 6, "BL_CONT", GPIO_ACTIVE_LOW),
-			    "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("sharp-scoop.1", 7, "BL_ON", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -531,10 +529,8 @@ static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
+		GPIO_LOOKUP("i2c-max7310", 3, "BL_ON", GPIO_ACTIVE_HIGH),
-			    "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("i2c-max7310", 4, "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -941,12 +937,9 @@ static inline void spitz_i2c_init(void) {}
 static struct gpiod_lookup_table spitz_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
-			    "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
+		GPIO_LOOKUP("sharp-scoop.1", 8, "mic", GPIO_ACTIVE_HIGH),
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -954,12 +947,9 @@ static struct gpiod_lookup_table spitz_audio_gpio_table = {
 static struct gpiod_lookup_table akita_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
-			    "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
+		GPIO_LOOKUP("i2c-max7310", 2, "mic", GPIO_ACTIVE_HIGH),
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };

arch/arm64/Kconfig

@@ -1068,6 +1068,44 @@ config ARM64_ERRATUM_3117295
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_3194386
+	bool "Cortex-*/Neoverse-*: workaround for MSR SSBS not self-synchronizing"
+	default y
+	help
+	  This option adds the workaround for the following errata:
+
+	  * ARM Cortex-A76 erratum 3324349
+	  * ARM Cortex-A77 erratum 3324348
+	  * ARM Cortex-A78 erratum 3324344
+	  * ARM Cortex-A78C erratum 3324346
+	  * ARM Cortex-A78C erratum 3324347
+	  * ARM Cortex-A710 erratam 3324338
+	  * ARM Cortex-A720 erratum 3456091
+	  * ARM Cortex-A725 erratum 3456106
+	  * ARM Cortex-X1 erratum 3324344
+	  * ARM Cortex-X1C erratum 3324346
+	  * ARM Cortex-X2 erratum 3324338
+	  * ARM Cortex-X3 erratum 3324335
+	  * ARM Cortex-X4 erratum 3194386
+	  * ARM Cortex-X925 erratum 3324334
+	  * ARM Neoverse-N1 erratum 3324349
+	  * ARM Neoverse N2 erratum 3324339
+	  * ARM Neoverse-V1 erratum 3324341
+	  * ARM Neoverse V2 erratum 3324336
+	  * ARM Neoverse-V3 erratum 3312417
+
+	  On affected cores "MSR SSBS, #0" instructions may not affect
+	  subsequent speculative instructions, which may permit unexepected
+	  speculative store bypassing.
+
+	  Work around this problem by placing a Speculation Barrier (SB) or
+	  Instruction Synchronization Barrier (ISB) after kernel changes to
+	  SSBS. The presence of the SSBS special-purpose register is hidden
+	  from hwcaps and EL0 reads of ID_AA64PFR1_EL1, such that userspace
+	  will use the PR_SPEC_STORE_BYPASS prctl to change SSBS.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y

arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -215,6 +215,11 @@
 				#sound-dai-cells = <0>;
 				status = "disabled";
 
+				assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+						  <&clkc CLKID_HDMI>;
+				assigned-clock-parents = <&xtal>, <0>;
+				assigned-clock-rates = <0>, <24000000>;
+
 				/* VPU VENC Input */
 				hdmi_tx_venc_port: port@0 {
 					reg = <0>;

arch/arm64/boot/dts/amlogic/meson-g12.dtsi

@@ -367,6 +367,10 @@
 	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
 };

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -311,10 +311,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
+	clocks = <&clkc CLKID_HDMI>,
-		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -323,10 +323,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
+	clocks = <&clkc CLKID_HDMI>,
-		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {

arch/arm64/boot/dts/amlogic/meson-sm1.dtsi

@@ -339,7 +339,7 @@
 		};
 
 		spdifin: audio-controller@400 {
-			compatible = "amlogic,g12a-spdifin",
+			compatible = "amlogic,sm1-spdifin",
 				     "amlogic,axg-spdifin";
 			reg = <0x0 0x400 0x0 0x30>;
 			#sound-dai-cells = <0>;
@@ -353,7 +353,7 @@
 		};
 
 		spdifout_a: audio-controller@480 {
-			compatible = "amlogic,g12a-spdifout",
+			compatible = "amlogic,sm1-spdifout",
 				     "amlogic,axg-spdifout";
 			reg = <0x0 0x480 0x0 0x50>;
 			#sound-dai-cells = <0>;
@@ -518,6 +518,10 @@
 		     "amlogic,meson-gpio-intc";
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
 &pcie {
 	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
 };

arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts

@@ -163,13 +163,12 @@
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai3>;
+			frame-master;
+			bitclock-master;
 		};
 
 		simple-audio-card,codec {
 			sound-dai = <&wm8962>;
-			clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
-			frame-master;
-			bitclock-master;
 		};
 	};
 };
@@ -381,10 +380,9 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
-			  <&clk IMX8MP_AUDIO_PLL2> ;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
-	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+	assigned-clock-rates = <12288000>;
-	assigned-clock-rates = <12288000>, <361267200>;
 	fsl,sai-mclk-direction-output;
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -794,6 +794,14 @@
 						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
 					};
 
+					pgc_mlmix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+					};
+
 					pgc_gpumix: power-domain@7 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPUMIX>;
@@ -818,6 +826,12 @@
 						power-domains = <&pgc_gpumix>;
 					};
 
+					pgc_vpumix: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
 					pgc_gpu3d: power-domain@9 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
@@ -833,7 +847,28 @@
 							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
 					};
 
-					pgc_hdmimix: power-domains@14 {
+					pgc_vpu_g1: power-domain@11 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+					};
+
+					pgc_vpu_g2: power-domain@12 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+					};
+
+					pgc_vpu_vc8000e: power-domain@13 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+					};
+
+					pgc_hdmimix: power-domain@14 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>;
 						clocks = <&clk IMX8MP_CLK_HDMI_ROOT>,
@@ -845,7 +880,7 @@
 						assigned-clock-rates = <500000000>, <133000000>;
 					};
 
-					pgc_hdmi_phy: power-domains@15 {
+					pgc_hdmi_phy: power-domain@15 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_HDMI_PHY>;
 					};
@@ -870,41 +905,6 @@
 						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
 						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
 					};
-
-					pgc_vpumix: power-domain@19 {
-						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
-						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
-					};
-
-					pgc_vpu_g1: power-domain@20 {
-						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
-						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
-					};
-
-					pgc_vpu_g2: power-domain@21 {
-						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
-						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
-					};
-
-					pgc_vpu_vc8000e: power-domain@22 {
-						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
-						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
-					};
-
-					pgc_mlmix: power-domain@24 {
-						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
-						clocks = <&clk IMX8MP_CLK_ML_AXI>,
-							 <&clk IMX8MP_CLK_ML_AHB>,
-							 <&clk IMX8MP_CLK_NPU_ROOT>;
-					};
 				};
 			};
 		};

arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts

@@ -437,7 +437,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	no-sdio;

arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi

@@ -19,7 +19,7 @@
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
-			alloc-ranges = <0 0x60000000 0 0x40000000>;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
 			size = <0 0x10000000>;
 			linux,cma-default;
 		};

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -1201,6 +1201,8 @@
 				fsl,num-tx-queues = <3>;
 				fsl,num-rx-queues = <3>;
 				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 

arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts

@@ -318,8 +318,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
+			function = "emmc";
-			groups = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",

arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts

@@ -244,8 +244,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
+			function = "emmc";
-			groups = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi

@@ -28,7 +28,7 @@
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi

@@ -156,21 +156,24 @@
 		vdd18-supply = <&pp1800_mipibrdg>;
 		vdd33-supply = <&vddio_mipibrdg>;
 
-		#address-cells = <1>;
+		ports {
-		#size-cells = <0>;
+			#address-cells = <1>;
-		port@0 {
+			#size-cells = <0>;
-			reg = <0>;
 
-			anx7625_in: endpoint {
+			port@0 {
-				remote-endpoint = <&dsi_out>;
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
 			};
-		};
 
-		port@1 {
+			port@1 {
-			reg = <1>;
+				reg = <1>;
 
-			anx7625_out: endpoint {
+				anx7625_out: endpoint {
-				remote-endpoint = <&panel_in>;
+					remote-endpoint = <&panel_in>;
+				};
 			};
 		};
 

arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi

@@ -775,7 +775,6 @@
 		};
 		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
 		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
@@ -794,7 +793,6 @@
 		};
 		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
 		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;

arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi

@@ -147,6 +147,7 @@
 		regulator-boot-on;
 		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&pp3300_g>;
+		off-on-delay-us = <500000>;
 	};
 
 	/* separately switched 3.3V power rail */

arch/arm64/boot/dts/mediatek/mt8195.dtsi

@@ -3395,7 +3395,7 @@
 			};
 		};
 
-		gpu0-thermal {
+		gpu-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <250>;
 			thermal-sensors = <&lvts_ap MT8195_AP_GPU0>;

arch/arm64/boot/dts/qcom/ipq6018.dtsi

@@ -579,6 +579,7 @@
 				clocks = <&xo>;
 				clock-names = "ref";
 				tx-fifo-resize;
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;

arch/arm64/boot/dts/qcom/ipq8074.dtsi

@@ -641,6 +641,7 @@
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_0>, <&usb0_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -683,6 +684,7 @@
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_1>, <&usb1_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;

arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi

@@ -405,7 +405,6 @@
 
 &hsusb_phy1 {
 	status = "okay";
-	extcon = <&typec>;
 
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -2090,7 +2090,7 @@
 				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
 			freq-table-hz =
 				<100000000 200000000>,
-				<0 0>,
+				<100000000 200000000>,
 				<0 0>,
 				<0 0>,
 				<0 0>,
@@ -3082,6 +3082,7 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,is-utmi-l1-suspend;
+				snps,parkmode-disable-ss-quirk;
 				tx-fifo-resize;
 			};
 		};

arch/arm64/boot/dts/qcom/msm8998.dtsi

@@ -1588,7 +1588,6 @@
 			 * SoC VDDMX RPM Power Domain in the Adreno driver.
 			 */
 			power-domains = <&gpucc GPU_GX_GDSC>;
-			status = "disabled";
 		};
 
 		gpucc: clock-controller@5065000 {
@@ -2160,7 +2159,8 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2169,33 +2169,26 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
+			reg = <0x0c010000 0x1000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
+			status = "disabled";
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
 		};
 
 		qusb2phy: phy@c012000 {

arch/arm64/boot/dts/qcom/qdu1000.dtsi

@@ -1452,7 +1452,21 @@
 				    "llcc_broadcast_base",
 				    "multi_channel_register";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
+
+			nvmem-cells = <&multi_chan_ddr>;
+			nvmem-cell-names = "multi-chan-ddr";
+		};
+
+		sec_qfprom: efuse@221c8000 {
+			compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom";
+			reg = <0 0x221c8000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			multi_chan_ddr: multi-chan-ddr@12b {
+				reg = <0x12b 0x1>;
+				bits = <0 2>;
+			};
 		};
 	};
 

arch/arm64/boot/dts/qcom/qrb4210-rb2.dts

@@ -57,6 +57,17 @@
 		};
 	};
 
+	i2c2_gpio: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -187,7 +198,7 @@
 	};
 };
 
-&i2c2 {
+&i2c2_gpio {
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -353,6 +364,8 @@
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		vreg_l10a_1p8: l10 {

arch/arm64/boot/dts/qcom/sa8775p.dtsi

@@ -2350,6 +2350,7 @@
 			phy-names = "serdes";
 
 			iommus = <&apps_smmu 0x140 0xf>;
+			dma-coherent;
 
 			snps,tso;
 			snps,pbl = <32>;
@@ -2383,6 +2384,7 @@
 			phy-names = "serdes";
 
 			iommus = <&apps_smmu 0x120 0xf>;
+			dma-coherent;
 
 			snps,tso;
 			snps,pbl = <32>;
@@ -2398,7 +2400,7 @@
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pcie0: pci@1c00000{

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -15,6 +15,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -2795,49 +2796,28 @@
 			nvmem-cells = <&qusb2p_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
+			reg = <0 0x088e8000 0 0x3000>;
-			      <0 0x088e8000 0 0x3c>,
-			      <0 0x088ea000 0 0x18c>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
+			#clock-cells = <1>;
-				reg = <0 0x088e9200 0 0x128>,
+			#phy-cells = <1>;
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x18>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
 		};
 
 		pmu@90b6300 {
@@ -3001,7 +2981,8 @@
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3307,8 +3288,9 @@
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
-				phys = <&dp_phy>;
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -3365,8 +3347,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi0_phy 0>,
 				 <&mdss_dsi0_phy 1>,
-				 <&dp_phy 0>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "dsi0_phy_pll_out_byteclk",

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -858,7 +859,7 @@
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_lane>,
 				 <0>, <0>, <0>,
-				 <&usb_1_ssphy>;
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
@@ -3351,49 +3352,26 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
-			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy";
-				     "qcom,sm8250-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
+			#clock-cells = <1>;
-				reg = <0 0x088e9200 0 0x200>,
+			#phy-cells = <1>;
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3702,7 +3680,8 @@
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3807,8 +3786,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
 				 <&mdss_dsi_phy 1>,
-				 <&dp_phy 0>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
-				 <&dp_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
 				 <&mdss_edp_phy 1>;
 			clock-names = "bi_tcxo",
@@ -4144,8 +4123,9 @@
 						"stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
-				phys = <&dp_phy>;
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;

arch/arm64/boot/dts/qcom/sc8180x.dtsi

@@ -1853,7 +1853,7 @@
 			power-domains = <&gcc PCIE_3_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_3 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie3_phy>;
@@ -1952,7 +1952,7 @@
 			power-domains = <&gcc PCIE_1_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_1 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie1_phy>;
@@ -2051,7 +2051,7 @@
 			power-domains = <&gcc PCIE_2_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_2 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie2_phy>;
@@ -2093,7 +2093,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2132,10 +2132,8 @@
 
 		ufs_mem_phy: phy-wrapper@1d87000 {
 			compatible = "qcom,sc8180x-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
+			reg = <0 0x01d87000 0 0x1000>;
-			#address-cells = <2>;
+
-			#size-cells = <2>;
-			ranges;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref",
@@ -2143,16 +2141,12 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
+			power-domains = <&gcc UFS_PHY_GDSC>;
-				reg = <0 0x01d87400 0 0x108>,
+
-				      <0 0x01d87600 0 0x1e0>,
+			#phy-cells = <0>;
-				      <0 0x01d87c00 0 0x1dc>,
+
-				      <0 0x01d87800 0 0x108>,
+			status = "disabled";
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
 		};
 
 		ipa_virt: interconnect@1e00000 {
@@ -2551,11 +2545,14 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8180x-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
-			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
-			      <0 0x09600000 0 0x50000>;
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -619,15 +619,16 @@
 
 	status = "okay";
 
-	/* FIXME: verify */
 	touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth5015m", "elan,ekth6915";
 		reg = <0x10>;
 
-		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&vreg_misc_3p3>;
+		reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
-		vddl-supply = <&vreg_s10b>;
+		no-reset-on-power-off;
+
+		vcc33-supply = <&vreg_misc_3p3>;
+		vccio-supply = <&vreg_misc_3p3>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts0_default>;
@@ -1451,8 +1452,8 @@
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
+			drive-strength = <2>;
-			drive-strength = <16>;
+			bias-disable;
 		};
 	};
 

arch/arm64/boot/dts/qcom/sdm630.dtsi

@@ -1258,6 +1258,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 
 				/*
 				 * SDM630 technically supports USB3 but I

arch/arm64/boot/dts/qcom/sdm845.dtsi

@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -2634,6 +2635,8 @@
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";
@@ -3981,80 +3984,54 @@
 			nvmem-cells = <&qusb2s_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
+			reg = <0 0x088e8000 0 0x3000>;
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
+			#clock-cells = <1>;
-				reg = <0 0x088e9200 0 0x128>,
+			#phy-cells = <1>;
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
+			reg = <0 0x088eb000 0 0x1000>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
+			status = "disabled";
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4103,7 +4080,8 @@
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4154,7 +4132,8 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				snps,parkmode-disable-ss-quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4571,8 +4550,9 @@
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
-				phys = <&dp_phy>;
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -4910,8 +4890,8 @@
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <&dp_phy 0>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

@@ -488,6 +488,7 @@
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm850/LENOVO/81JL/ipa_fws.elf";
 	status = "okay";
 };
 

arch/arm64/boot/dts/qcom/sm6115.dtsi

@@ -1043,6 +1043,8 @@
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref", "ref_aux";
 
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";

arch/arm64/boot/dts/qcom/sm6350.dtsi

@@ -1197,6 +1197,8 @@
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
@@ -1297,6 +1299,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "adsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1557,6 +1560,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1864,6 +1868,7 @@
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -2169,7 +2169,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2217,10 +2217,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8250-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
+			reg = <0 0x01d87000 0 0x1000>;
-			#address-cells = <2>;
+
-			#size-cells = <2>;
-			ranges;
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2228,16 +2226,12 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
+			power-domains = <&gcc UFS_PHY_GDSC>;
-				reg = <0 0x01d87400 0 0x16c>,
+
-				      <0 0x01d87600 0 0x200>,
+			#phy-cells = <0>;
-				      <0 0x01d87c00 0 0x200>,
+
-				      <0 0x01d87800 0 0x16c>,
+			status = "disabled";
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
 		};
 
 		cryptobam: dma-controller@1dc4000 {

arch/arm64/boot/dts/qcom/sm8350.dtsi

@@ -1731,6 +1731,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -4200,6 +4200,8 @@
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
 				 <&gcc GCC_UFS_0_CLKREF_EN>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";

arch/arm64/boot/dts/renesas/r8a779a0.dtsi

@@ -2910,6 +2910,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };

arch/arm64/boot/dts/renesas/r8a779f0.dtsi

@@ -1181,7 +1181,10 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 
 	ufs30_clk: ufs30-clk {

arch/arm64/boot/dts/renesas/r8a779g0.dtsi

@@ -2350,6 +2350,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };

arch/arm64/boot/dts/renesas/r9a07g043u.dtsi

@@ -50,7 +50,10 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
 

arch/arm64/boot/dts/renesas/r9a07g044.dtsi

@@ -1288,6 +1288,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };

arch/arm64/boot/dts/renesas/r9a07g054.dtsi

@@ -1295,6 +1295,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };

arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts

@@ -5,6 +5,8 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/leds/common.h>
 #include "rk3308.dtsi"
 
 / {
@@ -15,6 +17,7 @@
 		ethernet0 = &gmac;
 		mmc0 = &emmc;
 		mmc1 = &sdmmc;
+		mmc2 = &sdio;
 	};
 
 	chosen {
@@ -24,17 +27,21 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+		pinctrl-0 = <&green_led>, <&heartbeat_led>;
 
 		green-led {
+			color = <LED_COLOR_ID_GREEN>;
 			default-state = "on";
+			function = LED_FUNCTION_POWER;
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:green:power";
 			linux,default-trigger = "default-on";
 		};
 
 		blue-led {
+			color = <LED_COLOR_ID_BLUE>;
 			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:blue:user";
 			linux,default-trigger = "heartbeat";
@@ -126,21 +133,37 @@
 };
 
 &emmc {
-	bus-width = <4>;
 	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
+	cap-sd-highspeed;
+	no-sdio;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
 	vmmc-supply = <&vcc_io>;
 	status = "okay";
 };
 
 &gmac {
 	clock_in_out = "output";
+	phy-handle = <&rtl8201f>;
 	phy-supply = <&vcc_io>;
-	snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 50000 50000>;
 	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8201f: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac_rst>;
+			reset-assert-us = <20000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &i2c1 {
@@ -151,12 +174,32 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&rtc_32k>;
 
+	bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac {
+		mac_rst: mac-rst {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
-		green_led_gio: green-led-gpio {
+		green_led: green-led {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		heartbeat_led_gpio: heartbeat-led-gpio {
+		heartbeat_led: heartbeat-led {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -194,15 +237,31 @@
 	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	max-frequency = <1000000>;
+	max-frequency = <100000000>;
 	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
 	non-removable;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
+
+	rtl8723ds: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+	};
 };
 
 &sdmmc {
+	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	disable-wp;
+	vmmc-supply = <&vcc_io>;
 	status = "okay";
 };
 
@@ -221,16 +280,22 @@
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
 	status = "okay";
 };
 
 &uart4 {
+	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
-		compatible = "realtek,rtl8723bs-bt";
+		compatible = "realtek,rtl8723ds-bt";
-		device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
 	};
 };
 

arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts

@@ -186,8 +186,8 @@
 	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
-		interrupt-parent = <&gpio2>;
+		interrupt-parent = <&gpio0>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk805-clkout2";
 		gpio-controller;

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -822,8 +822,8 @@
 			<0>, <24000000>,
 			<24000000>, <24000000>,
 			<15000000>, <15000000>,
-			<100000000>, <100000000>,
+			<300000000>, <100000000>,
-			<100000000>, <100000000>,
+			<400000000>, <100000000>,
 			<50000000>, <100000000>,
 			<100000000>, <100000000>,
 			<50000000>, <50000000>,

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -790,6 +790,7 @@
 		dma-names = "tx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_tx>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -801,6 +802,7 @@
 		clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
 		dmas = <&dmac_bus 6>, <&dmac_bus 7>;
 		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -814,6 +816,7 @@
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s_8ch_bus>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi

@@ -450,7 +450,7 @@ ap_i2c_audio: &i2c8 {
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;

arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts

@@ -289,7 +289,7 @@
 				regulator-name = "vdd_gpu";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-ramp-delay = <6001>;
 

arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts

@@ -268,7 +268,7 @@
 		vcc9-supply = <&vcc3v3_sys>;
 
 		codec {
-			mic-in-differential;
+			rockchip,mic-in-differential;
 		};
 
 		regulators {

arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts

@@ -475,7 +475,7 @@
 		};
 
 		codec {
-			mic-in-differential;
+			rockchip,mic-in-differential;
 		};
 	};
 };

arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts

@@ -11,6 +11,10 @@
 	};
 };
 
+&pmu_io_domains {
+	vccio3-supply = <&vccio_sd>;
+};
+
 &sdmmc0 {
 	bus-width = <4>;
 	cap-mmc-highspeed;

arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi

@@ -39,9 +39,9 @@
 		};
 	};
 
-	dc_12v: dc-12v-regulator {
+	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
+		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <12000000>;
@@ -65,7 +65,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&vcc12v_dcin>;
 	};
 
 	vcc5v0_sys: vcc5v0-sys-regulator {
@@ -75,16 +75,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb_host";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
 	};
 
 	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
@@ -94,8 +85,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_usb_otg_en>;
 		regulator-name = "vcc5v0_usb_otg";
-		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
-		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
@@ -123,6 +115,10 @@
 	cpu-supply = <&vdd_cpu>;
 };
 
+&display_subsystem {
+	status = "disabled";
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu>;
 	status = "okay";
@@ -405,8 +401,8 @@
 &pmu_io_domains {
 	pmuio1-supply = <&vcc3v3_pmu>;
 	pmuio2-supply = <&vcc3v3_pmu>;
-	vccio1-supply = <&vccio_acodec>;
+	vccio1-supply = <&vcc_3v3>;
-	vccio3-supply = <&vccio_sd>;
+	vccio2-supply = <&vcc_1v8>;
 	vccio4-supply = <&vcc_1v8>;
 	vccio5-supply = <&vcc_3v3>;
 	vccio6-supply = <&vcc_1v8>;
@@ -429,28 +425,12 @@
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "host";
 	extcon = <&usb2phy0>;
 	status = "okay";
 };
 
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
 &usb_host1_xhci {
 	status = "okay";
 };
@@ -460,7 +440,7 @@
 };
 
 &usb2phy0_host {
-	phy-supply = <&vcc5v0_usb_host>;
+	phy-supply = <&vcc5v0_sys>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts

@@ -39,7 +39,7 @@
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -61,7 +61,7 @@
 		     &gmac1m1_rx_bus2
 		     &gmac1m1_rgmii_clk
 		     &gmac1m1_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -71,18 +71,18 @@
 };
 
 &mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy0_reset_pin>;
 		pinctrl-names = "default";
 	};
 };
 
 &mdio1 {
-	rgmii_phy1: ethernet-phy@0 {
+	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy1_reset_pin>;
 		pinctrl-names = "default";
 	};
@@ -102,6 +102,10 @@
 	};
 };
 
+&pmu_io_domains {
+	vccio3-supply = <&vcc_3v3>;
+};
+
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;

arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts

@@ -530,10 +530,6 @@
 				};
 			};
 		};
-
-		codec {
-			mic-in-differential;
-		};
 	};
 };
 

arch/arm64/boot/dts/rockchip/rk356x.dtsi

@@ -749,6 +749,7 @@
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
+		power-domains = <&power RK3568_PD_VO>;
 		status = "disabled";
 	};
 

arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts

@@ -390,6 +390,7 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;

arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi

@@ -1309,8 +1309,6 @@
 	       0 0 0 0
 	>;
 	tdm-slots = <2>;
-	rx-num-evt = <32>;
-	tx-num-evt = <32>;
 	#sound-dai-cells = <0>;
 	status = "disabled";
 };
@@ -1327,8 +1325,6 @@
 	       0 0 0 0
 	>;
 	tdm-slots = <2>;
-	rx-num-evt = <32>;
-	tx-num-evt = <32>;
 	#sound-dai-cells = <0>;
 	status = "disabled";
 };

arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts

@@ -903,6 +903,4 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };

arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi

@@ -481,8 +481,6 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };
 
 &dss {

arch/arm64/include/asm/acpi.h

@@ -119,6 +119,18 @@ static inline u32 get_acpi_id_for_cpu(unsigned int cpu)
 	return	acpi_cpu_get_madt_gicc(cpu)->uid;
 }
 
+static inline int get_cpu_for_acpi_id(u32 uid)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
+		if (acpi_cpu_get_madt_gicc(cpu) &&
+		    uid == get_acpi_id_for_cpu(cpu))
+			return cpu;
+
+	return -EINVAL;
+}
+
 static inline void arch_fix_phys_package_id(int num, u32 slot) { }
 void __init acpi_init_cpus(void);
 int apei_claim_sea(struct pt_regs *regs);

arch/arm64/include/asm/barrier.h

@@ -40,6 +40,10 @@
  */
 #define dgh()		asm volatile("hint #6" : : : "memory")
 
+#define spec_bar()	asm volatile(ALTERNATIVE("dsb nsh\nisb\n",		\
+						 SB_BARRIER_INSN"nop\n",	\
+						 ARM64_HAS_SB))
+
 #ifdef CONFIG_ARM64_PSEUDO_NMI
 #define pmr_sync()						\
 	do {							\

arch/arm64/include/asm/cputype.h

@@ -86,6 +86,14 @@
 #define ARM_CPU_PART_CORTEX_X2		0xD48
 #define ARM_CPU_PART_NEOVERSE_N2	0xD49
 #define ARM_CPU_PART_CORTEX_A78C	0xD4B
+#define ARM_CPU_PART_CORTEX_X1C		0xD4C
+#define ARM_CPU_PART_CORTEX_X3		0xD4E
+#define ARM_CPU_PART_NEOVERSE_V2	0xD4F
+#define ARM_CPU_PART_CORTEX_A720	0xD81
+#define ARM_CPU_PART_CORTEX_X4		0xD82
+#define ARM_CPU_PART_NEOVERSE_V3	0xD84
+#define ARM_CPU_PART_CORTEX_X925	0xD85
+#define ARM_CPU_PART_CORTEX_A725	0xD87
 
 #define APM_CPU_PART_XGENE		0x000
 #define APM_CPU_VAR_POTENZA		0x00
@@ -159,6 +167,14 @@
 #define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
 #define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
 #define MIDR_CORTEX_A78C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78C)
+#define MIDR_CORTEX_X1C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1C)
+#define MIDR_CORTEX_X3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X3)
+#define MIDR_NEOVERSE_V2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V2)
+#define MIDR_CORTEX_A720 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A720)
+#define MIDR_CORTEX_X4 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X4)
+#define MIDR_NEOVERSE_V3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V3)
+#define MIDR_CORTEX_X925 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X925)
+#define MIDR_CORTEX_A725 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A725)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)

arch/arm64/include/asm/jump_label.h

@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <asm/insn.h>
 
+#define HAVE_JUMP_LABEL_BATCH
 #define JUMP_LABEL_NOP_SIZE		AARCH64_INSN_SIZE
 
 static __always_inline bool arch_static_branch(struct static_key * const key,

arch/arm64/include/asm/unistd32.h

@@ -840,7 +840,7 @@ __SYSCALL(__NR_pselect6_time64, compat_sys_pselect6_time64)
 #define __NR_ppoll_time64 414
 __SYSCALL(__NR_ppoll_time64, compat_sys_ppoll_time64)
 #define __NR_io_pgetevents_time64 416
-__SYSCALL(__NR_io_pgetevents_time64, sys_io_pgetevents)
+__SYSCALL(__NR_io_pgetevents_time64, compat_sys_io_pgetevents_time64)
 #define __NR_recvmmsg_time64 417
 __SYSCALL(__NR_recvmmsg_time64, compat_sys_recvmmsg_time64)
 #define __NR_mq_timedsend_time64 418

arch/arm64/kernel/acpi_numa.c

@@ -27,24 +27,13 @@
 
 #include <asm/numa.h>
 
-static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE };
+static int acpi_early_node_map[NR_CPUS] __initdata = { [0 ... NR_CPUS - 1] = NUMA_NO_NODE };
 
 int __init acpi_numa_get_nid(unsigned int cpu)
 {
 	return acpi_early_node_map[cpu];
 }
 
-static inline int get_cpu_for_acpi_id(u32 uid)
-{
-	int cpu;
-
-	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
-		if (uid == get_acpi_id_for_cpu(cpu))
-			return cpu;
-
-	return -EINVAL;
-}
-
 static int __init acpi_parse_gicc_pxm(union acpi_subtable_headers *header,
 				      const unsigned long end)
 {

arch/arm64/kernel/armv8_deprecated.c

@@ -464,6 +464,9 @@ static int run_all_insn_set_hw_mode(unsigned int cpu)
 	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
 		struct insn_emulation *insn = insn_emulations[i];
 		bool enable = READ_ONCE(insn->current_mode) == INSN_HW;
+		if (insn->status == INSN_UNAVAILABLE)
+			continue;
+
 		if (insn->set_hw_mode && insn->set_hw_mode(enable)) {
 			pr_warn("CPU[%u] cannot support the emulation of %s",
 				cpu, insn->name);

arch/arm64/kernel/cpu_errata.c

@@ -448,6 +448,30 @@ static const struct midr_range erratum_spec_unpriv_load_list[] = {
 };
 #endif
 
+#ifdef CONFIG_ARM64_ERRATUM_3194386
+static const struct midr_range erratum_spec_ssbs_list[] = {
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A76),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A77),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A78C),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A720),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A725),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X1C),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X2),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X3),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X4),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_X925),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V3),
+	{}
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -746,6 +770,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.cpu_enable = cpu_clear_bf16_from_user_emulation,
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_3194386
+	{
+		.desc = "SSBS not fully self-synchronizing",
+		.capability = ARM64_WORKAROUND_SPECULATIVE_SSBS,
+		ERRATA_MIDR_RANGE_LIST(erratum_spec_ssbs_list),
+	},
+#endif
 #ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	{
 		.desc = "ARM errata 2966298, 3117295",

arch/arm64/kernel/cpufeature.c

@@ -2203,6 +2203,17 @@ static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
 }
 #endif /* CONFIG_ARM64_MTE */
 
+static void user_feature_fixup(void)
+{
+	if (cpus_have_cap(ARM64_WORKAROUND_SPECULATIVE_SSBS)) {
+		struct arm64_ftr_reg *regp;
+
+		regp = get_arm64_ftr_reg(SYS_ID_AA64PFR1_EL1);
+		if (regp)
+			regp->user_mask &= ~ID_AA64PFR1_EL1_SSBS_MASK;
+	}
+}
+
 static void elf_hwcap_fixup(void)
 {
 #ifdef CONFIG_ARM64_ERRATUM_1742098
@@ -3358,6 +3369,7 @@ void __init setup_cpu_features(void)
 	u32 cwg;
 
 	setup_system_capabilities();
+	user_feature_fixup();
 	setup_elf_hwcaps(arm64_elf_hwcaps);
 
 	if (system_supports_32bit_el0()) {

arch/arm64/kernel/jump_label.c

@@ -7,11 +7,12 @@
  */
 #include <linux/kernel.h>
 #include <linux/jump_label.h>
+#include <linux/smp.h>
 #include <asm/insn.h>
 #include <asm/patching.h>
 
-void arch_jump_label_transform(struct jump_entry *entry,
+bool arch_jump_label_transform_queue(struct jump_entry *entry,
-			       enum jump_label_type type)
+				     enum jump_label_type type)
 {
 	void *addr = (void *)jump_entry_code(entry);
 	u32 insn;
@@ -25,4 +26,10 @@ void arch_jump_label_transform(struct jump_entry *entry,
 	}
 
 	aarch64_insn_patch_text_nosync(addr, insn);
+	return true;
+}
+
+void arch_jump_label_transform_apply(void)
+{
+	kick_all_cpus_sync();
 }

arch/arm64/kernel/proton-pack.c

@@ -558,6 +558,18 @@ static enum mitigation_state spectre_v4_enable_hw_mitigation(void)
 
 	/* SCTLR_EL1.DSSBS was initialised to 0 during boot */
 	set_pstate_ssbs(0);
+
+	/*
+	 * SSBS is self-synchronizing and is intended to affect subsequent
+	 * speculative instructions, but some CPUs can speculate with a stale
+	 * value of SSBS.
+	 *
+	 * Mitigate this with an unconditional speculation barrier, as CPUs
+	 * could mis-speculate branches and bypass a conditional barrier.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_ERRATUM_3194386))
+		spec_bar();
+
 	return SPECTRE_MITIGATED;
 }
 

arch/arm64/kernel/setup.c

@@ -371,9 +371,6 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p)
 	smp_init_cpus();
 	smp_build_mpidr_hash();
 
-	/* Init percpu seeds for random tags after cpus are set up. */
-	kasan_init_sw_tags();
-
 #ifdef CONFIG_ARM64_SW_TTBR0_PAN
 	/*
 	 * Make sure init_thread_info.ttbr0 always generates translation

arch/arm64/kernel/smp.c

@@ -459,6 +459,8 @@ void __init smp_prepare_boot_cpu(void)
 		init_gic_priority_masking();
 
 	kasan_init_hw_tags();
+	/* Init percpu seeds for random tags after cpus are set up. */
+	kasan_init_sw_tags();
 }
 
 /*

arch/arm64/kernel/syscall.c

@@ -56,17 +56,15 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
 	syscall_set_return_value(current, regs, 0, ret);
 
 	/*
-	 * Ultimately, this value will get limited by KSTACK_OFFSET_MAX(),
+	 * This value will get limited by KSTACK_OFFSET_MAX(), which is 10
-	 * but not enough for arm64 stack utilization comfort. To keep
+	 * bits. The actual entropy will be further reduced by the compiler
-	 * reasonable stack head room, reduce the maximum offset to 9 bits.
+	 * when applying stack alignment constraints: the AAPCS mandates a
+	 * 16-byte aligned SP at function boundaries, which will remove the
+	 * 4 low bits from any entropy chosen here.
 	 *
-	 * The actual entropy will be further reduced by the compiler when
+	 * The resulting 6 bits of entropy is seen in SP[9:4].
-	 * applying stack alignment constraints: the AAPCS mandates a
-	 * 16-byte (i.e. 4-bit) aligned SP at function boundaries.
-	 *
-	 * The resulting 5 bits of entropy is seen in SP[8:4].
 	 */
-	choose_random_kstack_offset(get_random_u16() & 0x1FF);
+	choose_random_kstack_offset(get_random_u16());
 }
 
 static inline bool has_syscall_work(unsigned long flags)