clk: qcom: dispcc-sm8250: use special function for Lucid 5LPE PLL

[ Upstream commit 362be5cbae ]

According to msm-5.10 the lucid 5lpe PLLs have require slightly
different configuration that trion / lucid PLLs, it doesn't set
PLL_UPDATE_BYPASS bit. Add corresponding function and use it for the
display clock controller on Qualcomm SM8350 platform.

Fixes: 205737fe33 ("clk: qcom: add support for SM8350 DISPCC")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-2-1149dd8399fe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/clk/qcom/clk-alpha-pll.c

@@ -1757,6 +1757,58 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
 
+/**
+ * clk_lucid_5lpe_pll_configure - configure the lucid 5lpe pll
+ *
+ * @pll: clk alpha pll
+ * @regmap: register map
+ * @config: configuration to apply for pll
+ */
+void clk_lucid_5lpe_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+				  const struct alpha_pll_config *config)
+{
+	/*
+	 * If the bootloader left the PLL enabled it's likely that there are
+	 * RCGs that will lock up if we disable the PLL below.
+	 */
+	if (trion_pll_is_enabled(pll, regmap)) {
+		pr_debug("Lucid 5LPE PLL is already enabled, skipping configuration\n");
+		return;
+	}
+
+	clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
+	regmap_write(regmap, PLL_CAL_L_VAL(pll), TRION_PLL_CAL_VAL);
+	clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+	clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll),
+				     config->config_ctl_val);
+	clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll),
+				     config->config_ctl_hi_val);
+	clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U1(pll),
+				     config->config_ctl_hi1_val);
+	clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll),
+					config->user_ctl_val);
+	clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll),
+					config->user_ctl_hi_val);
+	clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U1(pll),
+					config->user_ctl_hi1_val);
+	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll),
+					config->test_ctl_val);
+	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll),
+					config->test_ctl_hi_val);
+	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll),
+					config->test_ctl_hi1_val);
+
+	/* Disable PLL output */
+	regmap_update_bits(regmap, PLL_MODE(pll),  PLL_OUTCTRL, 0);
+
+	/* Set operation mode to OFF */
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
+
+	/* Place the PLL in STANDBY mode */
+	regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+}
+EXPORT_SYMBOL_GPL(clk_lucid_5lpe_pll_configure);
+
 static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
 {
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);

drivers/clk/qcom/clk-alpha-pll.h

@@ -198,6 +198,8 @@ void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 
 void clk_zonda_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
+void clk_lucid_5lpe_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+				  const struct alpha_pll_config *config);
 void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 				 const struct alpha_pll_config *config);
 void clk_rivian_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,

drivers/clk/qcom/dispcc-sm8250.c

@@ -1359,8 +1359,13 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		disp_cc_sm8250_clocks[DISP_CC_MDSS_EDP_GTC_CLK_SRC] = NULL;
 	}
 
-	clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+	if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
-	clk_lucid_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
+		clk_lucid_5lpe_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+		clk_lucid_5lpe_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
+	} else {
+		clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+		clk_lucid_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
+	}
 
 	/* Enable clock gating for MDP clocks */
 	regmap_update_bits(regmap, 0x8000, 0x10, 0x10);