[ Upstream commit 90f3de6162 ]
snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.
In order to avoid too large values for 'str_size' (and potential negative
values for "PSOC_RAZWI_ENG_STR_SIZE - str_size") use scnprintf()
instead of snprintf().
Fixes: c0e6df9160 ("accel/habanalabs: fix address decode RAZWI handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to increase reliability of the event queue interface,
we apply to Gaudi2 the same mechanism we have in Gaudi1.
The extra validation is basically checking that the received
event index matches the expected index.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to utilize Engine Barrier padding, user must have access to
this register set.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
addr_dec info should always be fetched, regardless of cause value.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When receiving page fault from hmmu, the captured address is scrambled
both by HW and by driver. The driver part is unscrambled but the HW
part isn't getting unscrambled.
To avoid declaring wrong address, the HW scrambled part will be
masked.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
By default, the upper QMANs are not used, and instead engines ARCs
access the lower QMANs directly.
Errors for upper QMANs are therefore not expected, and the debug print
of the PQ entries is not needed.
Modify the QMAN debug data print on errors to include only information
for the lower QMAN.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The QMAN GLBL_ERR_STS_4 register has indications for errors also in the
lower CQ and the ARC CQ, and not just for errors in the lower CP.
Modify the relevant define/struct and the related print to use "lower
QM" instead of "lower CP".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When receiving sei interrupt from tpc or decoder, we need to check
the binning mask because if the engine is binned, the razwi info
won't be in the router of the binned engine, instead will be in the
router of the substitute engine.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Initially, the driver used to read the error cause data directly from
the ASIC. However, the FW now clears it before the driver could read
it. Therefore we should use the error cause data that is extracted by
the FW.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The gaudi2_get_tpc_idle_status() function returned the incorrect variable
so it always returned true.
Fixes: d85f0531b9 ("accel/habanalabs: break is_idle function into per-engine sub-routines")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to missing indication of address decode source (LBW/HBW bus),
we should always try and fetch extended information.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use a straight forward approach to get a conditional result.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For some reason the last possible tpc interrupt cause in
gaudi2_tpc_interrupts_cause is missing from the code.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User needs to be able to perform downcast / upcast of fp8_143 dtype.
Hence bias register needs to be accessed by the user.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is done depending on the FW version. The cpucp method is
preferable and saves scratchpads resource.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The fw inner version is less trustable, instead use the fw general
sw release version.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit fixes a bug in Gaudi2 when freeing the scratchpad memory
in case software init fails.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once it was decided that these security settings are to be done by FW
rather than by the driver, there's no reason to keep them in the code.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
EDMA transpose workload requires to signal for every activation.
User FW sends all the dummy signals to RD_LBW_RATE_LIM_CFG, to save
lbw bandwidth. We need the user to be able to access that register to
configure it.
Signed-off-by: Rakesh Ughreja <rughreja@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In Gaudi2 asic, PSOC RAZWI may cause in HBW or LBW. The address that
caused the error is read from HW register and printed by the Driver.
There are cases where the Driver receives an indication on PSOC
RAZWI error but the address value is zero. In that case, the indication
is a false positive.
The Driver should not "count" a PSOC RAZWI event error when the
caused the address is zeroed.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
HW queues testing at driver load and after reset takes a substantial
amount of time.
This commit reduces the queues test time in Gaudi2 devices by running
all the tests in parallel instead of one after the other.
Time measurements on tests duration shows that the new method is almost
x100 faster than the serial approach.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is only single eq entry for arc farm sei event which aggregates
events from the four arc farms.
Fix the code to handle this event according to this behavior.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Removing redundant asic prop variable as we don't need to expose this
to common code. In addition, fix some typos.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Receiving events from FW, while the device is in hard reset, causes
a warning message in Driver log. The message may point to a
problem in the Driver or FW. But It also can appear as a result
of events that have been sent from FW just before the hard reset.
In order to avoid receiving events from FW while the device is in reset
and is already in 'disabled' mode, sync the f/w events interrupt right
before setting the device to 'disabled'.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are rare cases of failures when cards are initialized due to
wrong values in efuse mappings that are parsed by firmware.
To help debug those cases, print (in debug level) the raw binning masks
as fetched from the firmware during device initialization.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current mapping between HMMU event and HMMU block is wrong.
In addition the captured address in case of a page fault or
an access error is scrambled, Hence we must call the descramble
function.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The register which needs to be cleared is the valid register instead
of the address.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As mmu refactor and nic resume are not relevant anymore, remove
their TODO comments.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
FW had one data route for tpc0 and tpc1 when running in secured mode
and a different one when running without secured mode. After fw fixed
this issue, both mode have the same data path.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order for the user to be aware of unexpected events in Gaudi2 that
aren't assigned to a specific engine, we are adding the handling of
this dedicated interrupt.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After getting page fault in gaudi2, we need to clear the valid bit
instead of the address.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
All engine masks are exposed to user, make sure user gets the
correct rotator enabled mask in gaudi2.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Remove all '\n' from strings which are passed as arguments to
gaudi2_print_event(), because the newline character is added internally
in this function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Now that CQ-completion based jobs do not trigger a reset upon failure,
failure of such jobs (e.g., MMU cache invalidation) should be handled
by the caller itself depending on the error code returned to it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Since the err_cause register is unprivileged, we should read it from
the driver instead of using the param that came from the FW.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
- remove reset_sleep_ms arg from functions that don't use it.
- move the call msleep(reset_sleep_ms) from btm poll to gaudi2_hw_fini
as it is called from there already for other flow.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In hw_fini callback, we use either the cpucp packet method or polling a
register. Currently we return error only in the case of cpucp packet
failure. In this patch we also return error if polling timed out.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to a firmware bug we need to increase reset poll timeout
or else we will timeout in secured environments.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Engines idle state can't always be verified between changes of
engine modes (e.g., stall/halt).
For example, if a CS is inflight when altering engine's mode,
idle state will return NOT idle, always.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We plan to do soft-reset either by mmio or by using cpucp packet
depending on the FW version. We don't want to check FW version in two
different places for that (execute soft-reset and wait to soft-reset)
so move the waiting to gaudi2_execute_soft_reset. This also makes sense
because the cpucp also does the waiting.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The user might want to stall/resume engines to perform power testing
for various scenarios. Because our current
HL_CS_FLAGS_ENGINE_CORE_COMMAND command only handles the engines' cores,
we need to add another opcode for handling entire engine and not just
its core.
The user supplies an array, where each entry holds the engine's ID and
the command to send to the engine. The size of the array is limited
by the number of engines in the ASIC (only Gaudi2 is currently
supported).
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The PDMA/EDMA is_idle routines didn't check the correct CORE register
in order to get the accurate idle state.
Moreover, it's better to make the is_idle routine more robust by adding
additional checks (IS_HALTED) before announcing that the core is idle.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Is appears that the flag -
DCORE0_TPC0_CFG_STATUS_VECTOR_PIPE_EMPTY_MASK, has no actual use when
it comes to querying TPC idleness, since this flag's corresponding bit
turns-off after stalling the engine, and turns back on after resuming
it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
