We want to keep the idle time fixed, so compute based on the current DDR
frequency.
The old properties were deprecated and never used, so we can safely drop
them from the driver.
This is a rewritten version of work by Lin Huang <hl@rock-chips.com>.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Implement the newly-defined properties to allow disabling certain
power-saving-at-idle features at higher frequencies.
This is a rewritten version of work by Lin Huang <hl@rock-chips.com>.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
We're going to add new usages, and it's cleaner to work with macros
instead of comments and magic numbers.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
All of these properties are initialized by ARM Trusted Firmware, and
have been since the early days of this chip. It's redundant (and
possibly wrong) to do this here now. What's more, there seems to be some
confusion about the units and some of the definitions of this timing
struct: the DT docs say MHz for many of these, but downstream users were
in Hz (and therefore, the ATF interface was Hz). Also, the in-driver
usage for some of these (e.g., for comparing to target frequency) were
in Hz too. So doubly wrong.
We can avoid thinking about who got the right units by dropping the
unnecessary code and properties. They are marked deprecated in the
binding schema.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
These properties are:
* undocumented
* directly representing software properties, not hardware properties
* unused (no in-tree users, yet; this IP block has so far only been used
in downstream kernels)
Let's just stick the values that downstream users have been using
directly in the driver and call it a day.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Suppose devfreq_update_status() failure in devfreq_set_target() is not a
critical error, reduces the log severity.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Compile-testing the driver without CONFIG_COMMON_CLK causes
a link failure:
arm-linux-gnueabi-ld: drivers/devfreq/sun8i-a33-mbus.o: in function `sun8i_a33_mbus_remove':
sun8i-a33-mbus.c:(.text+0x450): undefined reference to `clk_rate_exclusive_put'
arm-linux-gnueabi-ld: sun8i-a33-mbus.c:(.text+0x460): undefined reference to `clk_rate_exclusive_put'
arm-linux-gnueabi-ld: drivers/devfreq/sun8i-a33-mbus.o: in function `sun8i_a33_mbus_probe':
sun8i-a33-mbus.c:(.text+0x85c): undefined reference to `clk_rate_exclusive_get'
arm-linux-gnueabi-ld: sun8i-a33-mbus.c:(.text+0x878): undefined reference to `clk_rate_exclusive_get'
Fixes: 8bfd4858b4 ("PM / devfreq: Add a driver for the sun8i/sun50i MBUS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This driver works by adjusting the divider on the DRAM controller's
module clock. Thus there is no fixed set of OPPs, only "full speed" down
to "quarter speed" (or whatever the maximum divider is on that variant).
It makes use of the MDFS hardware in the MBUS, in "DFS" mode, which
takes care of updating registers during the critical section while DRAM
is inaccessible.
This driver should support several sunxi SoCs, starting with the A33,
which have a DesignWare DDR3 controller with merged PHY register space
and the matching MBUS register layout (so not A63 or later). However,
the driver has only been tested on the A64/H5, so those are the only
compatibles enabled for now.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Since commit ea572f8160 ("PM / devfreq: Change return type of
devfreq_set_freq_table()"), all devfreq devices are expected to have a
valid freq_table. The devfreq core unconditionally dereferences
freq_table in the sysfs code and in get_freq_range().
Therefore, we need to ensure that freq_table is both non-null and
non-empty (length is > 0). If either check fails, replace the table
using set_freq_table() or return the error.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
When parsing devicetree, the function of_get_devfreq_events(), for each
device child node, iterates over array of possible events "ppmu_events"
till it finds one matching by node name. When match is found the
ppmu_events[i] points to element having both the name of the event and
the counters ID.
Each PPMU device child node might have an "event-name" property with the
name of the event, however due to the design of devfreq it must be the
same as the device node name. If it is not the same, the devfreq client
won't be able to use it via devfreq_event_get_edev_by_phandle().
Since PPMU device child node name must be equal to the "event-name"
property (event-name == ppmu_events[i].name), there is no need to find
the counters ID by the "event-name". Instead use ppmu_events[i].id
which must be equal to it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Devicetree naming convention requires device node names to use hyphens
instead of underscore, so Exynos5422 devfreq event name
"ppmu-event3-dmc0_0" should be "ppmu-event3-dmc0-0". Newly introduced
dtschema enforces this, however the driver still expects old name with
an underscore.
Add new events for Exynos5422 while still accepting old name for
backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
EMC clock is always-on and can't be zero. Check whether clk_round_rate()
returns zero rate and error out if it does. It can return zero if clock
tree isn't initialized properly.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
HZ unit conversion macros are available in units.h, use them and remove
the duplicate definition.
The new macro has an unsigned long type.
All the code is dealing with unsigned long and the code using the macro is
doing a coercitive cast to unsigned long.
Link: https://lkml.kernel.org/r/20210816114732.1834145-5-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 86ad9a24f2 ("PM / devfreq: Add required OPPs support to passive governor")
supported the required-opp property for using devfreq passive governor.
But, 86ad9a24f2 has caused the problem on use-case when required-opp
is not used such as exynos-bus.c devfreq driver. So that fix the
get_target_freq of passive governor for supporting the case of when
required-opp is not used.
Fixes: 86ad9a24f2 ("PM / devfreq: Add required OPPs support to passive governor")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Use DEVICE_ATTR_RW helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The driver can't support simple ondemand governor due to missing
.get_dev_status() capability.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Expose ACTMON devfreq device as a cooling device in order to throttle
memory freq on overheat. Throttling of memory freq has a significant
cooling effect on NVIDIA Tegra SoCs since higher memory freqs require
higher SoC core voltage which is one of the main causes of the heating.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Current driver actually does not support simple ondemand governor
as it's unable to provide device load information. So removing
the unnecessary callback to avoid confusing.
Right now the driver is using userspace governor by default.
polling_ms was also dropped as it's not needed for non-ondemand
governor.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Set err code in the error path before jumping to the end of the function.
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
i.MX is a DT-only platform, so of_match_ptr() can be safely
removed.
Remove the unneeded of_match_ptr().
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
i.MX is a DT-only platform, so of_match_ptr() can be safely
removed.
Remove the unneeded of_match_ptr().
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Current driver actually does not support simple ondemand governor
as it's unable to provide device load information. So removing
the unnecessary callback to avoid confusing.
Right now the driver is using userspace governor by default.
polling_ms was also dropped as it's not needed for non-ondemand
governor.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
First of all, no_central_polling was removed since
commit 7e6fdd4bad ("PM / devfreq: Core updates to support devices
which can idle")
Secondly, get_target_freq() is not only called only with update_devfreq()
notified by OPP now, but also min/max freq qos notifier.
So remove this invalid description now to avoid confusing.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Check .get_dev_status() in devfreq_update_stats in case it's abused
when a device does not provide it.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Use the more accurate returned new_freq as resume_freq.
It's the same as how devfreq->previous_freq was updated.
Fixes: 83f8ca45af ("PM / devfreq: add support for suspend/resume of a devfreq device")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The devfreq->lock is held for time of setup. Release the lock in the
error path, before jumping to the end of the function.
Change the goto destination which frees the allocated memory.
Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Currently the default behavior is to manually having the devfreq
backend to register themselves as a devfreq cooling device.
Instead of adding the code in the drivers for the thermal cooling
device registering, let's provide a flag in the devfreq's profile to
tell the common devfreq code to register the newly created devfreq as
a cooling device.
Suggested-by: Chanwoo Choi <cwchoi00@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* pm-devfreq:
PM / devfreq: rk3399_dmc: Remove unneeded semicolon
PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_device
PM / devfreq: Correct spelling in a comment
* pm-tools:
cpupower: Add cpuid cap flag for MSR_AMD_HWCR support
cpupower: Remove family arg to decode_pstates()
cpupower: Condense pstate enabled bit checks in decode_pstates()
cpupower: Update family checks when decoding HW pstates
cpupower: Remove unused pscur variable.
cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag
cpupower: Correct macro name for CPB caps flag
cpupower: Update msr_pstate union struct naming
cpupower: add Makefile dependencies for install targets
Look at the required OPPs of the "parent" device to determine the OPP that
is required from the slave device managed by the passive governor. This
allows having mappings between a parent device and a slave device even when
they don't have the same number of OPPs.
While at it do a minor spell-fix and remove out label.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Rearranged code and clean error paths ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP table can be used often in devfreq. Trying to get it each time can
be expensive, so cache it in the devfreq struct.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Added a blank line ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Eliminate the following coccicheck warning:
./drivers/devfreq/rk3399_dmc.c:403:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.
We don't want the OPP core to manage the clk for this driver, migrate to
dev_pm_opp_of_add_table_noclk() to make sure dev_pm_opp_set_opp()
doesn't have any side effects.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
In devfreq_add_device, replace devfreq->dev.parent
as dev to keep code simple.
Signed-off-by: pierre Kuo <vichy.kuo@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The device attribute exposed in sysfs is called 'polling_interval'. Align
the comment.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra check. Drop them.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Previously we were using count-weight of the T124 for T30 in order to
get EMC clock rate that was reasonable for T30. In fact the count-weight
should be x2 times smaller on T30, but then devfreq was producing a bit
too low EMC clock rate for ISO memory clients, like display controller
for example.
Now both Tegra ACTMON and Tegra DRM display drivers support interconnect
framework and display driver tells to ICC what a minimum memory bandwidth
is needed, preventing FIFO underflows. Thus, now we can use a proper
count-weight value for Tegra30 and MC_ALL device config needs a bit more
aggressive boosting.
Add a separate ACTMON driver configuration that is specific to Tegra30.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch moves ACTMON driver away from generating OPP table by itself,
transitioning it to use the table which comes from device-tree. This
change breaks compatibility with older device-trees and brings support
for the interconnect framework to the driver. This is a mandatory change
which needs to be done in order to implement interconnect-based memory
DVFS, i.e. device-trees need to be updated. Now ACTMON issues a memory
bandwidth requests using dev_pm_opp_set_bw() instead of driving EMC clock
rate directly.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Remove tegra20-devfreq in order to replace it with a EMC_STAT based
devfreq driver. Previously we were going to use MC_STAT based
tegra20-devfreq driver because EMC_STAT wasn't working properly, but
now that problem is resolved. This resolves complications imposed by
the removed driver since it was depending on both EMC and MC drivers
simultaneously.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds registration of a child platform device for the exynos
interconnect driver. It is assumed that the interconnect provider will
only be needed when #interconnect-cells property is present in the bus
DT node, hence the child device will be created only when such a property
is present.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tegra EMC driver was turned into a regular kernel driver, meaning that it
could be compiled as a loadable kernel module now. Hence EMC clock isn't
guaranteed to be available and clk_get("emc") may return -EPROBE_DEFER.
Let's silence the deferred probe error.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The Tegra EMC driver now could be compiled as a loadable kernel module.
Currently devfreq driver depends on the EMC/MC drivers in Kconfig, and
thus, devfreq is forced to be a kernel module if EMC is compiled as a
module. This build dependency could be relaxed since devfreq driver
checks MC/EMC presence on probe, allowing kernel configuration where
devfreq is a built-in driver and EMC driver is a loadable module.
This change puts Tegra20 devfreq Kconfig entry on a par with the Tegra30
devfreq entry.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tegra EMC driver was turned into a regular kernel driver, meaning that it
could be compiled as a loadable kernel module now. Hence EMC clock isn't
guaranteed to be available and clk_get("emc") may return -EPROBE_DEFER.
Let's silence the deferred probe error.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The devfreq structure instance contains the governor_name and a governor
instance. When need to show the governor name, better to use the name
of devfreq_governor structure. So, governor_name variable in struct devfreq
is a redundant and unneeded variable. Remove the redundant governor_name
of struct devfreq and then use the name of devfreq_governor instance.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
DEVFREQ supports the default governors like performance, simple_ondemand and
also allows the devfreq driver to add their own governor like tegra30-devfreq.c
according to their requirement. In result, some sysfs attributes are useful
or not useful. Prior to that the user can access all sysfs attributes
regardless of the available attributes.
So, clarify the access permission of sysfs attributes according to governor.
When adding the devfreq governor, can specify the available attribute
information by using DEVFREQ_GOV_ATTR_* constant variable. The user can
read or write the sysfs attributes in accordance to the specified attributes.
When adding the governor, can add the following attributes
according to the governor feature.
[Definition for speific sysfs attributes]
- DEVFREQ_GOV_ATTR_POLLING_INTERVAL to update polling interval for timer.
: /sys/class/devfreq/[devfreq dev name]/polling_interval
- DEVFREQ_GOV_ATTR_TIMER to change the type of timer on either deferrable
or dealyed timer.
: /sys/class/devfreq/[devfreq dev name]/timer
And all devfreq governors have to support the following common attributes.
The common attributes are added to devfreq class by default.
- governor
- available_governors
- available_frequencies
- cur_freq
- target_freq
- min_freq
- max_freq
- trans_stat
[Table of governor attribute flags for devfreq governors]
------------------------------------------------------------------------------
| simple | perfor | power | user | passive | tegra30
| ondemand | mance | save | space| |
------------------------------------------------------------------------------
governor | O | O | O | O | O | O
available_governors | O | O | O | O | O | O
available_frequencies | O | O | O | O | O | O
cur_freq | O | O | O | O | O | O
target_freq | O | O | O | O | O | O
min_freq | O | O | O | O | O | O
max_freq | O | O | O | O | O | O
trans_stat | O | O | O | O | O | O
--------------------------------------------------------
polling_interval | O | X | X | X | X | O
timer | O | X | X | X | X | X
------------------------------------------------------------------------------
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The devfreq governor is able to have the specific flag as follows
in order to implement the specific feature. For example, devfreq allows
user to change the governors on runtime via sysfs interface.
But, if devfreq device uses 'passive' governor, don't allow user to change
the governor. For this case, define the DEVFREQ_GOV_FLAG_IMMUTABLE
and set it to flag of passive governor.
[Definition for governor flag]
- DEVFREQ_GOV_FLAG_IMMUTABLE
: If immutable flag is set, governor is never changeable to other governors.
- DEVFREQ_GOV_FLAG_IRQ_DRIVEN
: Devfreq core won't schedule polling work for this governor if value is set.
[Table of governor flag for devfreq governors]
------------------------------------------------------------------------------
| simple | perfor | power | user | passive | tegra30
| ondemand | mance | save | space| |
------------------------------------------------------------------------------
immutable | X | X | X | X | O | O
interrupt_driven | X(polling)| X | X | X | X | O (irq)
------------------------------------------------------------------------------
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add a tracepoint for frequency changes of devfreq devices and
use it.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[cw00.choi: Move print position of tracepoint and add more information]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The update_devfreq() and update_passive_devfreq() have the duplicate
code when changing the target frequency on final stage. So, unify
frequency change code to devfreq_update_target() to remove the
duplicate code and to centralize the frequency change code.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
It's safe to enable the ACTMON clock at any time during driver probing,
even if we don't know the state of hardware, because it's used only for
collecting and processing stats, and interrupt is kept disabled. This
allows us to slightly improve code which performs initial hardware
resetting by making use of a single reset_control_reset() instead of
assert/deassert pair. Secondly, a potential error of the reset-control
API is handled nicely now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Previously, devfreq core support 'devfreq-events' property in order to get
the devfreq-event device by phandle. But, 'devfreq-events' property name is
not proper on devicetree binding because this name doesn't mean
the any h/w attribute.
The devfreq-event core hand over the rights to decide the property name
for getting the devfreq-event device on devicetree. Each devfreq-event driver
will decide the property name on devicetree binding and then pass
the their own property name to devfreq_event_get_edev_by_phandle function.
And change the prototype of devfreq_event_get_edev_count function
because of used deprecated 'devfreq-events' property.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Previously, devfreq core support 'devfreq' property in order to get
the devfreq device by phandle. But, 'devfreq' property name is not proper
on devicetree binding because this name doesn't mean the any h/w attribute.
The devfreq core hand over the right to decide the property name
for getting the devfreq device on devicetree. Each devfreq driver
will decide the property name on devicetree binding and pass
the their own property name to devfreq_get_devfreq_by_phandle function.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Split off part of devfreq_get_devfreq_by_phandle into a separate
function. This allows callers to fetch devfreq instances by enumerating
devicetree instead of explicit phandles.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[cw00.choi: Export devfreq_get_devfreq_by_node function and
add function to devfreq.h when CONFIG_PM_DEVFREQ is enabled.]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The commit 4dc3bab868 ("PM / devfreq: Add support delayed timer for
polling mode") supports the delayed timer but this commit missed
the adding the timer type to devfreq_summary debugfs node.
Add the timer type to devfreq_summary debugfs.
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Fix the wrong grammar at the end of code line by using semicolon.
Cc: stable vger.kernel.org
Fixes: 490a421bc5 ("PM / devfreq: Add debugfs support with devfreq_summary file")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance
name. In order to keep the consistency and to improve the readabilty,
unify the instance name as 'df'. Add add the missing conditional statement
to prevent the fault.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Until now, the devfreq driver using polling mode like simple_ondemand
governor have used only deferrable timer for reducing the redundant
power consumption. It reduces the CPU wake-up from idle due to polling mode
which check the status of Non-CPU device.
But, it has a problem for Non-CPU device like DMC device with DMA operation.
Some Non-CPU device need to do monitor continuously regardless of CPU state
in order to decide the proper next status of Non-CPU device.
So, add support the delayed timer for polling mode to support
the repetitive monitoring. The devfreq driver and user can select
the kind of timer on either deferrable and delayed timer.
For example, change the timer type of DMC device
based on Exynos5422-based Odroid-XU3 as following:
- If want to use deferrable timer as following:
echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer
- If want to use delayed timer as following:
echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The word 'descriptor' is misspelled throughout the tree.
Fix it up accordingly:
decriptors -> descriptors
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Booting a recent kernel on a rk3399-based system (nanopc-t4),
equipped with a recent u-boot and ATF results in an Oops due
to a NULL pointer dereference.
This turns out to be due to the rk3399-dmc driver looking for
an *undocumented* property (rockchip,pmu), and happily using
a NULL pointer when the property isn't there.
Instead, make most of what was brought in with 9173c5ceb0
("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters
to TF-A.") conditioned on finding this property in the device-tree,
preventing the driver from exploding.
Cc: stable@vger.kernel.org
Fixes: 9173c5ceb0 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Instead of warning when mutex_is_locked(), just use the lockdep
framework. The code is smaller and checks could be disabled for
production environments (it is useful only during development).
Put asserts at beginning of function, even before validating arguments.
The behavior of update_devfreq() is now changed because lockdep assert
will only print a warning, not return with EINVAL.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Fix inconsistent IS_ERR and PTR_ERR in imx_bus_init_icc().
The proper pointer to be passed as argument to PTR_ERR() is
priv->icc_pdev.
This bug was detected with the help of Coccinelle.
Fixes: 16c1d2f1b0bd ("PM / devfreq: imx: Register interconnect device")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
[cw00.choi: Edit the patch title from 'imx' to 'imx-bus']
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
GCC produces this warning when kernel compiled using `make W=1`:
warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
772 | strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN);
The strncpy doesn't take care of NULL-termination of the destination
buffer, while the strscpy does.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is no single device which can represent the imx interconnect.
Instead of adding a virtual one just make the main &noc act as the
global interconnect provider.
The imx interconnect provider driver will scale the NOC and DDRC based
on bandwidth request. More scalable nodes can be added in the future,
for example for audio/display/vpu/gpu NICs.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add initial support for dynamic frequency switching on pieces of the imx
interconnect fabric.
All this driver does is set a clk rate based on an opp table, it does
not map register areas.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
We're taking into account both HW memory-accesses + CPU activity based on
current CPU's frequency. For memory-accesses there is a kind of hysteresis
in a form of "boosting" which is managed by the tegra30-devfreq driver.
If current HW memory activity is higher than activity judged based of the
CPU's frequency, then there is no need to schedule cpufreq_update_work
because the result of the work will be a NO-OP. And thus,
tegra_actmon_cpufreq_contribution() should return 0, meaning that at the
moment CPU frequency doesn't contribute anything to the final decision
about required memory clock rate.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The dev_pm_qos_remove_request function can return 1 if
"aggregated constraint value has changed" so only negative values should
be reported as errors.
Fixes: 27dbc542f6 ("PM / devfreq: Use PM QoS for sysfs min/max_freq")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
'govenror' was used in place of 'governor'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
DEVFREQ_GOV_INTERVAL event indicates that update the interval
for polling mode of devfreq device. But, this event name doesn't
specify exactly what to do.
Change DEVFREQ_GOV_INTERVAL event name to DEVFREQ_GOV_UPDATE_INTERVAL
which specifies what to do by event name.
And modify the function name to DEVFREQ_GOV_UPDATE_INTERVAL
with 'devfreq_' prefix + verb + object as following:
- devfreq_interval_update -> devfreq_updatee_interval
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Remove unneeded extern keyword from devfreq-related header file
and adjust the indentation of function parameter to keep the
consistency in header file
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Based on commit aa7c352f98 ("PM / devfreq: Define the constant governor
name"), use constant name for userspace governor.
Signed-off-by: pierre Kuo <vichy.kuo@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This reverts commit 4585fbcb53.
The name changing as devfreq(X) breaks some user space applications,
such as Android HAL from Unisoc and Hikey [1].
The device name will be changed unexpectly after every boot depending
on module init sequence. It will make trouble to setup some system
configuration like selinux for Android.
So we'd like to revert it back to old naming rule before any better
way being found.
[1] https://lkml.org/lkml/2018/5/8/1042
Cc: John Stultz <john.stultz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Orson Zhai <orson.unisoc@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Adding an error log makes it easier to trace the function's error path.
Because the error code may be rewritten on return, print error code here.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The exynos_bus_profile_init process may fail, but the devfreq event device
remains enabled. Call devfreq_event_disable_edev on the error return path.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The probe process may fail, but the devfreq event device remains
enabled. Call devfreq_event_disable_edev on the error return path.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The IMX_SIP_DDR_DVFS_WAIT_CHANGE and IMX_SIP_DDR_FREQ_SET_HIGH defines
are not used so they can be removed.
Fixes: 518e99e2a22e ("PM / devfreq: Add dynamic scaling for imx8m ddr controller")
Reported-by: Shawn Guo <shawn.guo@kernel.org>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Improve code readability by changing the goto statements
as well as eliminating a few more goto statements (related to return
paths). Moreover, remove unused header file and adds a missing <linux/of.h>.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
[cw00.choi: Edit patch title and description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ
and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ
used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent
the build break.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
of_node_put() needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Fix kernel-doc warnings in devfreq files.
Also fix a typo.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds a new exynos_bus_profile_init_passive()
extracted from exynos_bus_probe() for devfreq device using passive governor.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
[cw00.choi: Edit description to indicate that function is for devfreq device
using passive governor]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds a new exynos_bus_profile_init() extracted
from exynos_bus_probe() for devfreq device using simple_ondemand governor
like parent devfreq device.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
[cw00.choi: Edit description to indicate that new function is
for parent devfreq device]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Declaration of DEVICE_ATTR_RW(min_freq) is placed after function
max_freq_store. Move it to the correct place after min_freq_show.
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Count time and transitions between devfreq frequencies in separate
struct devfreq_stats for improved code readability and maintenance.
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[cw00.choi: Fix the merge conflict in trasn_stat_store
and use 'devfreq->stats.*' style for consistent coding style
and restore the clean-up code of 'devfreq->profile->*']
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add clearing transition table and time in states devfreq statistics
by writing 0 (zero) to trans_stat file in devfreq sysfs. An example use
is like following:
echo 0 > /sys/class/devfreq/devfreqX/trans_stat
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
[cw00.choi: Edit return value if entering the wrong value for reset
and use arrary3_size() to get the size of 3-dimensional array]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Change time stats counting to bigger type by using 64-bit jiffies.
This will make devfreq stats code look similar to cpufreq stats and
prevents overflow (for HZ = 1000 after 49.7 days).
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The commit 4585fbcb53 ("PM / devfreq: Modify the device name as devfreq(X) for
sysfs") changed the node name to devfreq(x). After this commit, it is not
possible to get the device name through /sys/class/devfreq/devfreq(X)/*.
Add new name attribute in order to get device name.
Cc: stable@vger.kernel.org
Fixes: 4585fbcb53 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add driver for dynamic scaling the DDR Controller on imx8m chips. Actual
frequency switching is implemented inside TF-A, this driver wraps the
SMC calls and synchronizes the clk tree.
The DRAM clocks on imx8m have the following structure (abridged):
+----------+ |\ +------+
| dram_pll |-------|M| dram_core | |
+----------+ |U|---------->| D |
/--|X| | D |
dram_alt_root | |/ | R |
| | C |
+---------+ | |
|FIX DIV/4| | |
+---------+ | |
composite: | | |
+----------+ | | |
| dram_alt |----/ | |
+----------+ | |
| dram_apb |-------------------->| |
+----------+ +------+
The dram_pll is used for higher rates and dram_alt is used for lower
rates. The dram_alt and dram_apb clocks are "imx composite" and their
parent can also be modified.
This driver will prepare/enable the new parents ahead of switching (so
that the expected roots are enabled) and afterwards it will call
clk_set_parent to ensure the parents in clock framework are up-to-date.
The driver relies on dram_pll dram_alt and dram_apb being marked with
CLK_GET_RATE_NOCACHE for rate updates.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
[cw00.choi: Edit the COMPILE_TEST module dependency in Kconfig]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
