commit 3337a6fea2 upstream.
Per the "SMC calling convention specification", the 64-bit calling
convention can only be used when the client is 64-bit. Whereas the
32-bit calling convention can be used by either a 32-bit or a 64-bit
client.
Currently during SCM probe, irrespective of the client, 64-bit calling
convention is made, which is incorrect and may lead to the undefined
behaviour when the client is 32-bit. Let's fix it.
Cc: stable@vger.kernel.org
Fixes: 9a434cee77 ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Reviewed-By: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20230925-scm-v3-1-8790dff6a749@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SM MISC driver is the i.MX SCMI MISC protocol device driver part,
supports ctrl set, ctrl get, and request notification event.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Support i.MX SM MISC Control Protocol which includes set, get
and notification.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Separate the RTC part into a standalone function to prepare for
adding button feature
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Drop global variable by using device driver data to make
code cleaner.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
"bbm_rtc"->"bbm", since the driver is going to support rtc and powerkey
both.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Move the report structure to header file which will be used by consumers
Code style cleanup
Correct button report
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Sometimes there are rx timeout during scmi xfer, enlarge the rx
timeout from 30ms to 1000ms.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[ Upstream commit ea608a01d4 ]
Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp'
to mark if BPMP is suspended. Also, add a 'flags' field in the
'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be
set from the Tegra MC driver to signal that the reset of BPMP IPC
channels is required before sending MRQ to the BPMP FW. Together both
the fields allow us to handle any requests that might be sent too soon
as they can cause hang during system resume.
One case where we see BPMP requests being sent before the BPMP driver
has resumed is the memory bandwidth requests which are triggered by
onlining the CPUs during system resume. The CPUs are onlined before the
BPMP has resumed and we need to reset the BPMP IPC channels to handle
these requests.
The additional check for 'flags' is done to avoid any un-intended BPMP
IPC reset if the tegra_bpmp_transfer*() API gets called during suspend
sequence after the BPMP driver is suspended.
Fixes: f41e1442ac ("cpufreq: tegra194: add OPP support and set bandwidth")
Co-developed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d698e8b4f ]
An FF-A ABI could support both the SMC32 and SMC64 conventions.
A callee that runs in the AArch64 execution state and implements such
an ABI must implement both SMC32 and SMC64 conventions of the ABI.
So the FF-A drivers will need the option to choose the mode irrespective
of FF-A version and the partition execution mode flag in the partition
information.
Let us remove the check on the FF-A version for allowing the selection
of 32bit mode of messaging. The driver will continue to set the 32-bit
mode if the partition execution mode flag specified that the partition
supports only 32-bit execution.
Fixes: 106b11b1cc ("firmware: arm_ffa: Set up 32bit execution mode flag using partiion property")
Link: https://lore.kernel.org/r/20231005142823.278121-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d0bc6360f ]
Commit 19b8766459 ("firmware: arm_ffa: Fix FFA device names for logical
partitions") added an ID to the FFA device using ida_alloc() and append
the same to "arm-ffa" to make up a unique device name. However it missed
to stash the id value in ffa_dev to help freeing the ID later when the
device is destroyed.
Due to the missing/unassigned ID in FFA device, we get the following
warning when the FF-A device is unregistered.
| ida_free called for id=0 which is not allocated.
| WARNING: CPU: 7 PID: 1 at lib/idr.c:525 ida_free+0x114/0x164
| CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc4 #209
| pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : ida_free+0x114/0x164
| lr : ida_free+0x114/0x164
| Call trace:
| ida_free+0x114/0x164
| ffa_release_device+0x24/0x3c
| device_release+0x34/0x8c
| kobject_put+0x94/0xf8
| put_device+0x18/0x24
| klist_devices_put+0x14/0x20
| klist_next+0xc8/0x114
| bus_for_each_dev+0xd8/0x144
| arm_ffa_bus_exit+0x30/0x54
| ffa_init+0x68/0x330
| do_one_initcall+0xdc/0x250
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x104/0x170
| kernel_init+0x20/0x1a0
| ret_from_fork+0x10/0x20
Fix the same by actually assigning the ID in the FFA device this time
for real.
Fixes: 19b8766459 ("firmware: arm_ffa: Fix FFA device names for logical partitions")
Link: https://lore.kernel.org/r/20231003085932.3553985-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b7a224b1b ]
The TI-SCI message protocol provides a way to communicate between
various compute processors with a central system controller entity. It
provides the fundamental device management capability and clock control
in the SOCs that it's used in.
The remove function failed to do all the necessary cleanup if
there are registered users. Some things are freed however which
likely results in an oops later on.
Ensure that the driver isn't unbound by suppressing its bind and unbind
sysfs attributes. As the driver is built-in there is no way to remove
device once bound.
We can also remove the ti_sci_remove call along with the
ti_sci_debugfs_destroy as there are no callers for it any longer.
Fixes: aa276781a6 ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/20230216083908.mvmydic5lpi3ogo7@pengutronix.de/
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230921091025.133130-1-d-gole@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Add support for i.MX95 to use ELE Baseline APIs exposed by EdgeLock
Enclave Firmware.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
scmi-pinctrl driver implements pinctrl driver interface and using
SCMI protocol to redirect messages from pinctrl subsystem SDK to
SCMI platform firmware, which does the changes in HW.
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Acked-by: Nitin Garg <nitin.garg_3@nxp.com>
i.MX SCMI protocol is to manage RTC and BUTTON in BBNSM module
which is controlled by system controller.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Nitin Garg <nitin.garg_3@nxp.com>
The firmware may export flags to indicate whether the clock
is allowed to set rate, set parent, enable/disable from the Agent.
If Agent is not allowed to enable/disable, directly return success.
If Agent is not allowed to set rate/parent, directly return -EACCES to
avoid SCMI RPC calls.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Nitin Garg <nitin.garg_3@nxp.com>
Fixed the Secure Enclave FW driver probe cleanup.
The release of reserved memory device and RESERVED_DMA_POOL
flag unset from priv flags, must be after DMA free.
Signed-off-by: Rahul Kumar Yadav <rahulkumar.yadav@nxp.com>
Some IMEM region is lost during kernel power down. Due to this,
firmware's functionaity cannot work correctly.
Saving encrypted IMEM region in kernel memory during power down,
and restore IMEM region on resume.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
The Edgelock Enclave , is the secure enclave embedded in the SoC
to support the features like HSM, SHE & V2X, using message based
communication channel.
ELE FW communicates on a dedicated MU with application core where
kernel is running. It exists on specific i.MX processors. e.g.
i.MX8ULP, i.MX93.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
In ele-mu driver:
- Command lock is locked in process-context, while
- Command lock is unlocked as part of call-back function associated with the mail-box
interrupt.
To fix the issue, moving the unlocking of command lock from
interrupt-context to process-context.
Squashed:
firmware: imx: fix coverity issue in ele-mu
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
The allocated Shared Memory contain the API REQ and RESP
data, even after the required data is copied from/to user buffers,
during HSM APIs CMD/RESP.
There is no further use of this data in Shared Memory,
but possible that this data get retrieved in certain cases.
Memset the Shared Memory space allocated for Copying Data
from/to User Buffers during HSM APIs CMD/RESP.
Signed-off-by: Rahul Kumar Yadav <rahulkumar.yadav@nxp.com>
For i.MX93 A1, the FW initialization API is mandatory to called once.
Later, this API will be made mandatory for i.MX8ULP A2, & i.MX93 A0.
LF-9154: ele-mu: api call to initialize firmware as part of ele-mu
probing.
FIXME: The API handling needs to be fixed as per future definitive changes
in FW.
Squashed:
LF-9356: firmware: ele-mu: fix for init fw api.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
FW API(s) are handled differently as compared to base/rom api(s).
With increased number of fw api(s) requirement in driver, a fw file
to deal with fw api(s), is used.
lf-9154: ele-fw: moved fw rng api to file maintained for fw api(s).
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Currently two user buffer types are avilable which
can either be input or output.
Add new buffer type which is both input and output
acting as input to ELE and output to ELE library.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Some IMEM region is lost during power down, due to this
ELE functionaity cannot be used correctly.
so save encrypted IMEM region in kernel memory during power down,
and restore IMEM region on resume.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Varun Sethi <v.sethi@nxp.com>
during suspend this commands must be sent with EXPORT to save the IMEM.
during resume this commands must be sent with IMPORT to retrieve the IMEM.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Varun Sethi <v.sethi@nxp.com>
Created list of all dev-ctx during ele mu driver probe.
on driver resume, this list is used to wakeup
all the dev-ctx.
This way all dev-ctx resume their task.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Varun Sethi <v.sethi@nxp.com>
- removed static from imx_ele_msg_send_rcv api.
it is used to send and receive message over message
unit(mu) to communicate with S40x.
making this non static so other driver can use this
api to interact with S40x.
- moved the inclusion of mailbox_client.h to ele_mu.h
- added ele_get_trng_state to read the TRNG state.
ele mu driver use this to check if TRNG entropy is valid
and ready to be read.
- added ele_start_rng to start the initialization of the Sentinel RNG.
ele mu driver use this to start Sentinel RNG when trng state
is not valid.
- added ele_trng_enable in ele mu driver for initializing sentinel TRNG.
- added ele_trng_init to register Hardware Random Number Generator driver
- added ele_get_random to proceed with random number generation operation.
ele hwrng driver use this to read the random number with Sentinel.
Squashed:
LF-7786-1: firmware: imx: ele: split ele_trng_enable code
LF-8559 firmware: imx: ele: Update RNG request id
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Varun Sethi <V.Sethi@nxp.com>
LF-6569-2: imx: ele: use get info of ELE Baseline API to get SoC revision
On the latest i.MX8ULP, replace hardcoded SoC revision with the value
getting from ELE Baseline API.
LF-6665-1: imx: only iMX8ULP soc device is registered in ele_mu.c
Only iMX8ULP soc device is registered in ele_mu_probe() so that restrict
other soc devices from being registered by socdev.
Fixes: 781095d1241c ("firmware: imx: ele: use get info of ELE Baseline
API to get SoC revision")
LF-6684: imx: hardcode revision of soc when get info API fails
When get info API fails, iMX8ULP soc device is not be registered, and
insmod the modules that depend on it will make mistakes. So that
set revision to be A0 by default to avoid this issue.
Squashed:
LF-6744 firmware: coverity fix ele-mu
LF-9012: fix rom-get-info failure
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
The ELE Ping message can be sent to ELE at any time to
verify ELE is alive This ping msg must be sent at least once
every day (24 hours). So add a delay work with 1 hour interval
for this purpose.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Ping message can be sent to ELE at any time to verify
ELE is alive, add it into the ele base msg.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
- Added f_ops read-write
- added ioctl to
-- Allcate IO buffer
-- to get MU info
- Update the call back function:
- for receiving message from ELE
- for receiving response to the sent message via
-- misc device context (from userspace)
-- from kernel space.
Squashed:
LF-6609-5 firmware: imx: updated ele mu driver
LF-7428 firmware: fix-up with the clean-up to null
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Rahul Kumar Yadav <rahulkumar.yadav@nxp.com>
- Added the character driver based on miscellenous device
in the Secure enclave to enable communication from user-space
with EdgeLock Enclave (ELE) kernel driver.
- Added the support to invoke the base API(s) offered by
ELE.
-- Common function to created header.
-- Common function to:
--- send/receive the message.
--- to apply the mutex locks.
Squashed:
MA-20107-10 firmware: imx: Support building el_enclave driver as module
LF-9476-1 ele_base_msg: handle common fuse with special id
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Export the API to configure the group priority of a
dma channel via RPC call to SCU.
Reviewed-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Register a i.MX8ULP SoC device in s400-api.c.
Squash: MLK-25620 imx8ulp: soc: update imx8ulp soc device attribute
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
(cherry picked from commit 3bc399ee42)
In the Sentinel application, the security subsystem uses S4 MU-AP to
communicate and coordinate with the SoC host processor. The s400-api
firmware driver provides the services to transmit data to and receive
data from the S4 MU-AP.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
(cherry picked from commit 9745b4a997)
SCU IMX_SC_MISC_FUNC_UNIQUE_ID don't return value by scu
return value from SCU is undefined.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
In order for a message sent to a V2X MU, the value indication the
type of the message chagne for each MU addressed.
This patch adds the read of the values from the device tree or
uses the default values which works with SECO MU.
Signed-off-by: Stéphane Dion <stephane.dion_1@nxp.com>
This patch adds the driver to interact with the different
APIs exposed by the SECO using a shared Messaging Unit.
The driver exposes some char devices in user space allowing
a user to send message to the SECO and read its response.
The driver uses the mailbox framework instead of directly
configuring the MU.
Squash:
HSM-292 firmware: imx: seco_mu: Increase MAX_DATA_SIZE_PER_USER
MLK-23421: fw: imx: seco_mu: Use fast IPC
MLK-23635: fw: imx: seco_mu: Fix messages at boot
HSM-267-1: fw: imx: seco_mu: Handle error code in mailbox rx callback
MLK-23421: fw: imx: seco_mu: Add the driver if IMX_SCU is set
Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Hugo Dupras <hugo.dupras@nxp.com>
Reviewed-by: Stéphane Dion <stephane.dion_1@nxp.com>
Add imx_sc_rm_get_partition to get the runtime partition number.
Reviewed-by: zhang sanshan <pete.zhang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
We use hvc to let xen handle the scfw api call for dom0.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
[ Aisheng: fix minior conflicts due to
51f5afabc0 ("firmware: imx: Skip return value check for some special SCU firmware APIs") ]
Sign-off-by: Dong Aisheng <aisheng.dong@nxp.com>
SCMI v3.2 spec introduces CLOCK_POSSIBLE_PARENTS_GET, CLOCK_PARENT_SET
and CLOCK_PARENT_GET. Add support for these to enable clock parents
and use them in the clock driver.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231004-scmi-clock-v3-v5-1-1b8a1435673e@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
It is very confusing to use *_v2 for everything applicable until SCMI
clock protocol version v2.0 including v1.0 for example. So let us rename
such that *_v2 is used only for SCMI clock protocol v2.1 onwards. Also
add comment to indicate the same explicitly.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230925101557.3839860-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
To allow a consumer driver to use the OPP library to scale the performance
for its device, let's dynamically add the OPP table when the device gets
attached to its SCMI performance domain.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-10-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
To enable the performance level to be used for OPPs, let's convert into
using the dev_pm_opp_add_dynamic() API when creating them. This will be
particularly useful for the SCMI performance domain, as shown through
subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-9-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Let's simplify the code in scmi_dvfs_device_opps_add() by using
dev_pm_opp_remove_all_dynamic() in the error path.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-8-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
To enable support for performance scaling (DVFS) for generic devices with
the SCMI performance protocol, let's add an SCMI performance domain. This
is being modelled as a genpd provider, with support for performance scaling
through genpd's ->set_performance_state() callback.
Note that, this adds the initial support that allows consumer drivers for
attached devices, to vote for a new performance state via calling the
dev_pm_genpd_set_performance_state(). However, this should be avoided as
it's in most cases preferred to use the OPP library to vote for a new OPP
instead. The support using the OPP library isn't part of this change, but
needs to be implemented from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230919121605.7304-1-ulf.hansson@linaro.org
[Move perf domain driver to firmware]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Similar to other protocol ops, it's useful for an scmi module driver to get
some generic information of a performance domain. Therefore, let's add a
new callback to provide this information. The information is currently
limited to the name of the performance domain and whether the set-level
operation is supported, although this can easily be extended if we find the
need for it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-3-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Similar to other protocol ops, it's useful for an scmi module driver to get
the number of supported performance domains, hence let's make this
available by adding a new perf protocol callback. Note that, a user is
being added from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-2-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There are no longer any users of the ->device_domain_id() ops in the
scmi_perf_proto_ops, therefore let's remove it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-6-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Most scmi_perf_proto_ops are already using an "u32 domain" as an
in-parameter to indicate what performance domain we shall operate upon.
However, some of the ops are using a "struct device *dev", which means that
an additional OF parsing is needed each time the perf ops gets called, to
find the corresponding domain-id.
To avoid the above, but also to make the code more consistent, let's
replace the in-parameter "struct device *dev" with an "u32 domain". Note
that, this requires us to make some corresponding changes to the scmi
cpufreq driver, so let's do that too.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-5-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some recently added SCMI protocols needs an additional flags parameter to
be able to properly configure the command used to query the extended name
of a resource.
Modifed from:
https://lore.kernel.org/lkml/318eb79c7e1ddb1f964a901e778
a0475bf18c85b.1691518313.git.oleksii_moisieiev@epam.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Expose a couple of new SCMI Clock operations to get and set OEM specific
clock configurations when talking to an SCMI v3.2 compliant.
Issuing such requests against an SCMI platform server not supporting v3.2
extension for OEM specific clock configurations will fail.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230826125308.462328-7-cristian.marussi@arm.com
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Support Clock .state_get operation against SCMI platform servers that do
not support v3.2 CONFIG_GET dedicated command: while talking with these
platforms the command CLOCK_ATTRIBUTES can be used to gather the current
clock states.
Note that, in case of shared resources, the retrieved clock state 'flavour'
(virtual vs physical) depends on the backend SCMI platform server specific
kind of implementation.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230826125308.462328-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add support for v3.2 Clock CONFIG_GET command and related new clock
protocol operation state_get() to retrieve the status of a clock.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230826125308.462328-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI v3.2 introduces a new Clock CONFIG_SET message format that can
optionally carry also OEM specific configuration values beside the usual
clock enable/disable requests.
Refactor internal helpers and add support to use such new format when
talking to a v3.2 compliant SCMI platform.
Support existing enable/disable operations across different Clock protocol
versions: this patch still does not add protocol operations to support the
new OEM specific optional configuration capabilities.
No functional change for the SCMI drivers users of the related enable and
disable clock operations.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230826125308.462328-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI Clock enable/disable operations come in 2 different flavours which
simply just differ in how the underlying SCMI transactions is carried on:
atomic or not.
Currently we expose such SCMI operations through 2 distinctly named
wrappers, that, in turn, are wrapped into another couple of similarly and
distinctly named callbacks inside SCMI Clock driver user.
Reduce the churn of duplicated wrappers by adding a param to SCMI Clock
enable/disable operations to ask for atomic operation while removing the
_atomic version of such operations.
No functional change.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230826125308.462328-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
on i.MX8QM 1.0/1.1,TLB maintenance through DVM messages over ARADDR channel,
some bits (see the following) will be corrupted:
ASID[15:12] VA[48:45] VA[44:41] VA[39:36]
This issue will result in the TLB aintenance across the clusters not working
as expected due to some VA and ASID bits get corrupted
The SW workaround is: use the vmalle1is if VA larger than 36bits or
ASID[15:12] is not zero, otherwise, we use original TLB maintenance path.
Note: To simplify the code, we did not check VA[40] bit specifically
[ Leo: Separated arch changes into a separate patch ]
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Reviewed-by: Anson Huang <anson.huang@nxp.com>
A couple of platforms have some last-minute fixes for 6.7, in particular
- riscv gets some fixes for noncoherent DMA on the renesas and thead
platforms and dts fix for SPI on the visionfive 2 board
- Qualcomm Snapdragon gets three dts fixes to address board specific
regressions on the pmic and gpio nodes
- Rockchip platforms get multiple dts fixes to address issues on
the recent rk3399 platform as well as the older rk3128 platform
that apparently regressed a while ago.
- TI OMAP gets some trivial code and dts fixes and a regression fix
for the omap1 ams-delta modem
- NXP i.MX firmware has one fix for a use-after-free but in its
error handling.
-----BEGIN PGP SIGNATURE-----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=6/SQ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms have some last-minute fixes, in particular:
- riscv gets some fixes for noncoherent DMA on the renesas and thead
platforms and dts fix for SPI on the visionfive 2 board
- Qualcomm Snapdragon gets three dts fixes to address board specific
regressions on the pmic and gpio nodes
- Rockchip platforms get multiple dts fixes to address issues on the
recent rk3399 platform as well as the older rk3128 platform that
apparently regressed a while ago.
- TI OMAP gets some trivial code and dts fixes and a regression fix
for the omap1 ams-delta modem
- NXP i.MX firmware has one fix for a use-after-free but in its error
handling"
* tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
riscv: dts: thead: set dma-noncoherent to soc bus
arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
soc: renesas: Make ARCH_R9A07G043 depend on required options
riscv: dts: starfive: visionfive 2: correct spi's ss pin
firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
ARM: dts: rockchip: Fix timer clocks for RK3128
ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
ARM: dts: rockchip: Fix i2c0 register address for RK3128
arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
...
- don't try to print warnings to the console when it is no longer
available
- fix theoretical memory leak in SSDT override handling
- make sure that the boot_params global variable is set before the KASLR
code attempts to hash it for 'randomness'
- avoid soft lockups in the memory acceptance code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZTKmyAAKCRAwbglWLn0t
XOvWAQCz+MYqhf3HbmsyuzEV/HWxEw9gf+KGqSN9wmCrOI5nRAEA7pIWUpZ2e6Jt
eW/6DiyPZ+o7xLMX6J01vLROmQt1ogo=
=iVui
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The boot_params pointer fix uses a somewhat ugly extern struct
declaration but this will be cleaned up the next cycle.
- don't try to print warnings to the console when it is no longer
available
- fix theoretical memory leak in SSDT override handling
- make sure that the boot_params global variable is set before the
KASLR code attempts to hash it for 'randomness'
- avoid soft lockups in the memory acceptance code"
* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
x86/boot: efistub: Assign global boot_params variable
efi: fix memory leak in krealloc failure handling
x86/efistub: Don't try to print after ExitBootService()
Michael reported soft lockups on a system that has unaccepted memory.
This occurs when a user attempts to allocate and accept memory on
multiple CPUs simultaneously.
The root cause of the issue is that memory acceptance is serialized with
a spinlock, allowing only one CPU to accept memory at a time. The other
CPUs spin and wait for their turn, leading to starvation and soft lockup
reports.
To address this, the code has been modified to release the spinlock
while accepting memory. This allows for parallel memory acceptance on
multiple CPUs.
A newly introduced "accepting_list" keeps track of which memory is
currently being accepted. This is necessary to prevent parallel
acceptance of the same memory block. If a collision occurs, the lock is
released and the process is retried.
Such collisions should rarely occur. The main path for memory acceptance
is the page allocator, which accepts memory in MAX_ORDER chunks. As long
as MAX_ORDER is equal to or larger than the unit_size, collisions will
never occur because the caller fully owns the memory block being
accepted.
Aside from the page allocator, only memblock and deferered_free_range()
accept memory, but this only happens during boot.
The code has been tested with unit_size == 128MiB to trigger collisions
and validate the retry codepath.
Fixes: 2053bc57f3 ("efi: Add unaccepted memory support")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Michael Roth <michael.roth@amd.com
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Michael Roth <michael.roth@amd.com>
[ardb: drop unnecessary cpu_relax() call]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that the x86 EFI stub calls into some APIs exposed by the
decompressor (e.g., kaslr_get_random_long()), it is necessary to ensure
that the global boot_params variable is set correctly before doing so.
Note that the decompressor and the kernel proper carry conflicting
declarations for the global variable 'boot_params' so refer to it via an
alias to work around this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In the previous code, there was a memory leak issue where the
previously allocated memory was not freed upon a failed krealloc
operation. This patch addresses the problem by releasing the old memory
before setting the pointer to NULL in case of a krealloc failure. This
ensures that memory is properly managed and avoids potential memory
leaks.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
setup_e820() is executed after UEFI's ExitBootService has been called.
This causes the firmware to throw an exception because the Console IO
protocol is supposed to work only during boot service environment. As
per UEFI 2.9, section 12.1:
"This protocol is used to handle input and output of text-based
information intended for the system user during the operation of code
in the boot services environment."
So drop the diagnostic warning from this function. We might add back a
warning that is issued later when initializing the kernel itself.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
dsp_chan->name and chan_name points to same block of memory,
because dev_err still needs to be used it,so we need free
it's memory after use to avoid use_after_free.
Fixes: e527adfb9b ("firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These are teh latest bug fixes that have come up in the soc tree.
Most of these are fairly minor. Most notably, the majority of
changes this time are not for dts files as usual.
- Updates to the addresses of the broadcom and aspeed entries in the
MAINTAINERS file.
- Defconfig updates to address a regression on samsung and a build
warning from an unknown Kconfig symbol
- Build fixes for the StrongARM and Uniphier platforms
- Code fixes for SCMI and FF-A firmware drivers, both of which had
a simple bug that resulted in invalid data, and a lesser fix for
the optee firmware driver
- Multiple fixes for the recently added loongson/loongarch "guts"
soc driver
- Devicetree fixes for RISC-V on the startfive platform, addressing
issues with NOR flash, usb and uart.
- Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems
with clock, gpio, hdmi settings and the Makefile
- Bug fixes for i.MX firmware code and the OCOTP soc driver
- Multiple fixes for the TI sysc bus driver
- Minor dts updates for TI omap dts files, to address boot
time warnings and errors
-----BEGIN PGP SIGNATURE-----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=HAuE
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the latest bug fixes that have come up in the soc tree. Most
of these are fairly minor. Most notably, the majority of changes this
time are not for dts files as usual.
- Updates to the addresses of the broadcom and aspeed entries in the
MAINTAINERS file.
- Defconfig updates to address a regression on samsung and a build
warning from an unknown Kconfig symbol
- Build fixes for the StrongARM and Uniphier platforms
- Code fixes for SCMI and FF-A firmware drivers, both of which had a
simple bug that resulted in invalid data, and a lesser fix for the
optee firmware driver
- Multiple fixes for the recently added loongson/loongarch "guts" soc
driver
- Devicetree fixes for RISC-V on the startfive platform, addressing
issues with NOR flash, usb and uart.
- Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
clock, gpio, hdmi settings and the Makefile
- Bug fixes for i.MX firmware code and the OCOTP soc driver
- Multiple fixes for the TI sysc bus driver
- Minor dts updates for TI omap dts files, to address boot time
warnings and errors"
* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
MAINTAINERS: Fix Florian Fainelli's email address
arm64: defconfig: enable syscon-poweroff driver
ARM: locomo: fix locomolcd_power declaration
soc: loongson: loongson2_guts: Remove unneeded semicolon
soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
soc: loongson: loongson_pm2: Populate children syscon nodes
dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
soc: loongson: loongson_pm2: Drop useless of_device_id compatible
dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
soc: loongson: loongson_pm2: Add dependency for INPUT
arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
ARM: uniphier: fix cache kernel-doc warnings
MAINTAINERS: aspeed: Update Andrew's email address
MAINTAINERS: aspeed: Update git tree URL
firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
arm64: dts: imx8mm-evk: Fix hdmi@3d node
soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
arm64: dts: imx8mp: Fix SDMA2/3 clocks
...
A single fix to address scmi_perf_attributes_get() using the protocol
version even before it was populated and ending up with unexpected
bogowatts power scale.
-----BEGIN PGP SIGNATURE-----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=v9wZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZyGq
-----END PGP SIGNATURE-----
Merge tag 'scmi-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.6
A single fix to address scmi_perf_attributes_get() using the protocol
version even before it was populated and ending up with unexpected
bogowatts power scale.
* tag 'scmi-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fixup perf power-cost/microwatt support
Link: https://lore.kernel.org/r/20230927121604.158645-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It has been reported that the driver sets the memory region attributes
for MEM_LEND operation when the specification clearly states not to. The
fix here addresses the issue by ensuring the memory region attributes are
cleared for the memory lending operation.
-----BEGIN PGP SIGNATURE-----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=Flo6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=MdPT
-----END PGP SIGNATURE-----
Merge tag 'ffa-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.6
It has been reported that the driver sets the memory region attributes
for MEM_LEND operation when the specification clearly states not to. The
fix here addresses the issue by ensuring the memory region attributes are
cleared for the memory lending operation.
* tag 'ffa-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
Link: https://lore.kernel.org/r/20230927121555.158619-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As per the FF-A specification: section "Usage of other memory region
attributes", in a transaction to donate memory or lend memory to a single
borrower, if the receiver is a PE or Proxy endpoint, the owner must not
specify the attributes and the relayer will return INVALID_PARAMETERS
if the attributes are set.
Let us not set the memory region attributes for MEM_LEND.
Fixes: 82a8daaecf ("firmware: arm_ffa: Add support for MEM_LEND")
Reported-by: Joao Alves <joao.alves@arm.com>
Reported-by: Olivier Deprez <olivier.deprez@arm.com>
Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- fix boot regression on SEV-SNP (and TDX) caused by a fix in the
preceding batch
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZQ1ddAAKCRAwbglWLn0t
XOIQAP4nS3RWd2On40iOMpyfmKo8BmuM1smJC5r6xQTc55eORwEA3ezhbKZruxMp
bU2qR0yH/aGEtyOX0lDN0NIntplQdgI=
=ldKV
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Follow-up fix for the unaccepted memory fix merged last week as part
of the first EFI fixes batch.
The unaccepted memory table needs to be accessible very early, even in
cases (such as crashkernels) where the direct map does not cover all
of DRAM, and so it is added to memblock explicitly, and subsequently
memblock_reserve()'d as before"
* tag 'efi-fixes-for-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Make sure unaccepted table is mapped
A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks
-----BEGIN PGP SIGNATURE-----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=1MuW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks"
* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
ALSA: rawmidi: Fix NULL dereference at proc read
ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
ASoC: cs42l43: Add shared IRQ flag for shutters
ASoC: imx-audmix: Fix return error with devm_clk_get()
ASoC: hdaudio.c: Add missing check for devm_kstrdup
ALSA: riptide: Fix -Wformat-truncation warning for longname string
ALSA: cs4231: Fix -Wformat-truncation warning for longname string
ALSA: ad1848: Fix -Wformat-truncation warning for longname string
ALSA: hda: generic: Check potential mixer name string truncation
ALSA: cmipci: Fix -Wformat-truncation warning
ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
ALSA: firewire: Fix -Wformat-truncation warning for longname string
ALSA: xen: Fix -Wformat-truncation warning
ALSA: opti9x: Fix -Wformat-truncation warning
ALSA: es1688: Fix -Wformat-truncation warning
ALSA: cs4236: Fix -Wformat-truncation warning
...
Unaccepted table is now allocated from EFI_ACPI_RECLAIM_MEMORY. It
translates into E820_TYPE_ACPI, which is not added to memblock and
therefore not mapped in the direct mapping.
This causes a crash on the first touch of the table.
Use memblock_add() to make sure that the table is mapped in direct
mapping.
Align the range to the nearest page borders. Ranges smaller than page
size are not mapped.
Fixes: e7761d827e ("efi/unaccepted: Use ACPI reclaim memory for unaccepted memory table")
Reported-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
If mbox_request_channel_byname() fails, the memory allocated a few lines
above still need to be freed before going to the error handling path.
Fixes: 046326989a ("firmware: imx: Save channel name for further use")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change the logging of each algorithm from info level to debug level.
On the original devices supported by this code there were typically only
one or two algorithms in a firmware and one or two DSPs so this logging
only used a small number of log lines.
However, for the latest devices there could be 30-40 algorithms in a
firmware and 8 DSPs being loaded in parallel, so using 300+ lines of log
for information that isn't particularly important to have logged.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913160523.3701189-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The perf power scale value would currently be reported as bogowatts if the
platform firmware supports microwatt power scale and meets the perf major
version requirements. Fix this by populating version information in the
driver private data before the call to protocol attributes is made.
CC: Chandra Sekhar Lingutla <quic_lingutla@quicinc.com>
Fixes: 3630cd8130 ("firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwatts")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230811204818.30928-1-quic_sibis@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Kyril reports that crashkernels fail to work on confidential VMs that
rely on the unaccepted memory table, and this appears to be caused by
the fact that it is not considered part of the set of firmware tables
that the crashkernel needs to map.
This is an oversight, and a result of the use of the EFI_LOADER_DATA
memory type for this table. The correct memory type to use for any
firmware table is EFI_ACPI_RECLAIM_MEMORY (including ones created by the
EFI stub), even though the name suggests that is it specific to ACPI.
ACPI reclaim means that the memory is used by the firmware to expose
information to the operating system, but that the memory region has no
special significance to the firmware itself, and the OS is free to
reclaim the memory and use it as ordinary memory if it is not interested
in the contents, or if it has already consumed them. In Linux, this
memory is never reclaimed, but it is always covered by the kernel direct
map and generally made accessible as ordinary memory.
On x86, ACPI reclaim memory is translated into E820_ACPI, which the
kexec logic already recognizes as memory that the crashkernel may need
to to access, and so it will be mapped and accessible to the booting
crash kernel.
Fixes: 745e3ed85f ("efi/libstub: Implement support for unaccepted memory")
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
* The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
* Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
* Support for the V extension in ptrace(), again.
* Support for KASLR.
* Support for the BPF prog pack allocator in RISC-V.
* A handful of bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=s89m
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
Alexandre Ghiti <alexghiti@rivosinc.com> says:
The following KASLR implementation allows to randomize the kernel mapping:
- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
hence the patch 3 factorizes KASLR related functions for riscv to take
advantage.
The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.
* b4-shazam-merge:
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We can now use arm64 functions to handle the move of the kernel physical
mapping: if KASLR is enabled, we will try to get a random seed from the
firmware, if not possible, the kernel will be moved to a location that
suits its alignment constraints.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-6-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fix the following warning which appears when compiled for rv32 by using
unsigned long type instead of u64.
../drivers/firmware/efi/libstub/efi-stub-helper.c: In function 'efi_kaslr_relocate_kernel':
../drivers/firmware/efi/libstub/efi-stub-helper.c:846:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
846 | (u64)_end < EFI_ALLOC_LIMIT) {
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This prepares for riscv to use the same functions to handle the pĥysical
kernel move when KASLR is enabled.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+
t9KG0iMDXRuTsOqeEQbd
=tVnk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support.
- AMLogic C3 SoC pin control support.
- Texas Instruments AM654 SoC pin control support.
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System)
pin control support.
- Qualcomm PMX75 and PM7550BA (Power Management) pin control
support.
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support.
- DROP the Oxnas driver as there is not enough of community
interest to keep carrying this ARM(11) port.
Enhancements:
- Bias control in the MT7986 pin control driver.
- Misc device tree binding enhancements such as the Broadcom
11351 being converted to YAML.
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use.
- Clean up some SPDX headers.
- Handle non-unique devicetree subnode names in two Renesas
drivers.
-----BEGIN PGP SIGNATURE-----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=AMCy
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files
are handled.
-----BEGIN PGP SIGNATURE-----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=c9NM
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
The main change this time is the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together. Ulf Hansson is taking over maintainership for
these and is sending a separate pull request with the same commits,
but they are in the soc drivers tree to avoid conflicts against other
soc driver patches.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other firmware
drivers.
On the soc driver side, the updates are mostly cleanups across a number
of Arm platforms. On driver for loongarch adds power management for DT
based systems, another driver is for HiSilicon's Arm server chips with
their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform.
-----BEGIN PGP SIGNATURE-----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=xmHW
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
and starts moving some of the corresponding code in there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the soc
maintainers (Arnd Bergmann, etc) in particular, but also to gain a better
overall view of what goes on in the area, I will help out with maintenance.
-----BEGIN PGP SIGNATURE-----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=Vp8b
-----END PGP SIGNATURE-----
Merge tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power domain providers in
drivers/genpd and starts moving some of the corresponding code in
there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the
soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
better overall view of what goes on in the area, I will help out with
maintenance"
[ I find the "genpd" name singularly uninformative, so we'll probably
end up moving this driver subsystem somewhere else, but that's still
being discussed - Linus ]
* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
genpd: ti: Use for_each_node_with_property() simplify code logic
genpd: Explicitly include correct DT includes
genpd: imx: scu-pd: initialize is_off according to HW state
genpd: imx: scu-pd: Suppress bind attrs
genpd: imx: scu-pd: do not power off console if no_console_suspend
genpd: imx: scu-pd: add more PDs
genpd: imx: scu-pd: enlarge PD range
genpd: imx: relocate scu-pd under genpd
MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
genpd: Makefile: build imx
genpd: move owl-sps-helper.c from drivers/soc
soc: starfive: remove stale Makefile entry
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
...
We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit;
this also involves enabling UML builds of ALSA since that's the
default KUnit test environment which pulls in the addition of some
stubs to the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements
-----BEGIN PGP SIGNATURE-----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=Rr0i
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040: Backlight support, magic improved,
Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple: Set bpc value to fix warning; Set connector type for AUO T215HVN01;
Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v: Support Inanbo T28CP45TN89 plus DT bindings;
Support EDT ET028013DMA plus DT bindings; Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi: Improve support for YUV420 bus format
CEC suspend/resume, update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
- adv7511: Fix low refresh rate
- anx7625: Switch to macros instead of hardcoded values
locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v: Support panel orientation; Support rotation
property; Add support for Jasonic
JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release
of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes
-----BEGIN PGP SIGNATURE-----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=CwV9
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"The drm core grew a new generic gpu virtual address manager, and new
execution locking helpers. These are used by nouveau now to provide
uAPI support for the userspace Vulkan driver. AMD had a bunch of new
IP core support, loads of refactoring around fbdev, but mostly just
the usual amount of stuff across the board.
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040:
- Backlight support
- magic improved
- Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple:
- Set bpc value to fix warning
- Set connector type for AUO T215HVN01
- Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v:
- Support Inanbo T28CP45TN89 plus DT bindings
- Support EDT ET028013DMA plus DT bindings
- Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi:
- Improve support for YUV420 bus format
- CEC suspend/resume
- update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764:
- Handle HS/VS polarity
- Use BIT() macro
- Various cleanups
- adv7511: Fix low refresh rate
- anx7625:
- Switch to macros instead of hardcoded values
- locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v:
- Support panel orientation
- Support rotation property
- Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
drm/tests/drm_kunit_helpers: Place correct function name in the comment header
drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
drm/nouveau: uvmm: fix unset region pointer on remap
drm/nouveau: sched: avoid job races between entities
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/i915: Fix TLB-Invalidation seqno store
drm/ttm/tests: Fix type conversion in ttm_pool_test
drm/msm/a6xx: Bail out early if setting GPU OOB fails
drm/msm/a6xx: Move LLC accessors to the common header
drm/msm/a6xx: Introduce a6xx_llc_read
drm/ttm/tests: Require MMU when testing
drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amdgpu: Add memory vendor information
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: Remove gfxoff check in GFX v9.4.3
drm/amd/pm: Update pci link speed for smu v13.0.6
...
CPU features and system registers:
* Advertise hinted conditional branch support (FEAT_HBC) to
userspace
* Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
* Fix macro name typo in SME documentation
Entry code:
* Unmask exceptions earlier on the system call entry path
Memory management:
* Don't bother clearing PTE_RDONLY for dirty ptes in
pte_wrprotect() and pte_modify()
Perf and PMU drivers:
* Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
* Fix hw_breakpoint single-stepping when called from bpf
* Fixes for DDR PMU on i.MX8MP SoC
* Add NUMA-awareness to Hisilicon PCIe PMU driver
* Fix locking dependency issue in Arm DMC620 PMU driver
* Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
* Add support for Arm CMN-700 r3 parts to the CMN PMU driver
* Add support for recent Arm Cortex CPU PMUs
* Update Hisilicon PMU maintainers
Selftests:
* Add a bunch of new features to the hwcap test (JSCVT, PMULL,
AES, SHA1, etc)
* Fix SSVE test to leave streaming-mode after grabbing the
signal context
* Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
* Allow compiler to warn on suspicious looking system register
expressions
* Work around SDEI firmware bug by aborting any running
handlers on a kernel crash
* Fix some harmless warnings when building with W=1
* Remove some unused function declarations
* Other minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmTon4QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG0nCAC9lTqppELnqXPA3FswONhtDBnKEufZHp0+
4+Z6CPjAYZpd7ruiezvxeZA62tZl3eX+tYOx+6lf4xYxFA5W/RQdmxM7e0mGJd+n
sgps85kxArApCgJR9zJiTCAIPXzKH5ObsFWWbcRljI9fiISVDTYn1JFAEx9UERI5
5yr6blYF2H115oD8V2f/0vVObGOAuiqNnzqJIuKL1I8H9xBK0pssrKvuCCN8J2o4
28+PeO7PzwWPiSfnO15bLd/bGuzbMCcexv4/DdjtLZaAanW7crJRVAzOon+URuVx
JXmkzQvXkOgSKnEFwfVRYTsUbtOz2cBafjSujVmjwIBymhbBCZR/
=WqmX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
- one bugfix for x86 mixed mode that did not make it into v6.5
- first pass of cleanup for the EFI runtime wrappers
- some cosmetic touchups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZOx+LAAKCRAwbglWLn0t
XKzLAPwK8wIZ14NlC55NCtdvKEzK3N/muxKRqg2MAHfrbnREFgD9GgUxSbIEU2gz
BXQM9GLaP86qCXkZlPYktjP6RVfDYAk=
=e2mx
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"This primarily covers some cleanup work on the EFI runtime wrappers,
which are shared between all EFI architectures except Itanium, and
which provide some level of isolation to prevent faults occurring in
the firmware code (which runs at the same privilege level as the
kernel) from bringing down the system.
Beyond that, there is a fix that did not make it into v6.5, and some
doc fixes and dead code cleanup.
- one bugfix for x86 mixed mode that did not make it into v6.5
- first pass of cleanup for the EFI runtime wrappers
- some cosmetic touchups"
* tag 'efi-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Fix PCI ROM preservation in mixed mode
efi/runtime-wrappers: Clean up white space and add __init annotation
acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers
efi/runtime-wrappers: Don't duplicate setup/teardown code
efi/runtime-wrappers: Remove duplicated macro for service returning void
efi/runtime-wrapper: Move workqueue manipulation out of line
efi/runtime-wrappers: Use type safe encapsulation of call arguments
efi/riscv: Move EFI runtime call setup/teardown helpers out of line
efi/arm64: Move EFI runtime call setup/teardown helpers out of line
efi/riscv: libstub: Fix comment about absolute relocation
efi: memmap: Remove kernel-doc warnings
efi: Remove unused extern declaration efi_lookup_mapped_addr()
preserve_pci_rom_image() was accessing the romsize field in
efi_pci_io_protocol_t directly instead of using the efi_table_attr()
helper. This prevents the ROM image from being saved correctly during a
mixed mode boot.
Fixes: 2c3625cb9f ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmTiDvweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7doH/2Poj73npPKPVfT3
RF8AsgvAj2pLby67rdvwTdFX+exS63SsuwtGGRfAHfGabiwmNN+oT2dLb0aY15bp
nskHnFpcqQ/pfZ2i2rUCenzBX8S9QULvPidLKRaf1FcSdOzqd97Bw5oDPMtzqy/R
Pm+Dzs//7fYvtm69nt6hKW4d6wXxNcg7Fk/QgoJ5Ax9vGvDuZmWXH0ZgBf/5kH04
TTPQNtVX57lf+FHugkhFEn4JbYXvN168b+LuX2PHwOeG/8AIS69Hc0vgvhHNAycT
mmpUI1gWA2jfrJ2RCyyezF/6wy9Ocsp+CbPjfwjuRUxOk0XIm1+cp9Mlz/cRbMsZ
f0tOTpk=
=xrJp
-----END PGP SIGNATURE-----
BackMerge tag 'v6.5-rc7' into drm-next
Linux 6.5-rc7
This is needed for the CI stuff and the msm pull has fixes in it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of bypassing the kernel's adaptation layer for performing EFI
runtime calls, wire up ACPI PRM handling into it. This means these calls
can no longer occur concurrently with EFI runtime calls, and will be
made from the EFI runtime workqueue. It also means any page faults
occurring during PRM handling will be identified correctly as
originating in firmware code.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Avoid duplicating the EFI arch setup and teardown routine calls numerous
times in efi_call_rts(). Instead, expand the efi_call_virt_pointer()
macro into efi_call_rts(), taking the pre and post parts out of the
switch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
__efi_call_virt() exists as an alternative for efi_call_virt() for the
sole reason that ResetSystem() returns void, and so we cannot use a call
to it in the RHS of an assignment.
Given that there is only a single user, let's drop the macro, and expand
it into the caller. That way, the remaining macro can be tightened
somewhat in terms of type safety too.
Note that the use of typeof() on the runtime service invocation does not
result in an actual call being made, but it does require a few pointer
types to be fixed up and converted into the proper function pointer
prototypes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmTe2FIVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FPaYP/0j7dGziE/KQaTccT/arpgiU6wH/
fzu7j76r/JY90Jw61vxWsTfuR94Irr8/NzzvLXMO1cKfzJXxsPKqYuuWBe/hFu3u
Bva/4XtHspitKQCvBYOhX2dxj3BtYzsrVNmh3sOeEKhXcUaVuCQXkpeE3fqNBwYB
li70t/dHVPPr2mDY30QhD9nn8XgWG8DlSzyuvIp+zI8kpNX04Cdqg2BEidB8GO4f
ZgcAtnCIssIojBhRwVO7ei8RnGu6i2+69Vwtrx8nNT85Wcyx7NLxjZfp7+5PrZnv
Xyu/JO4yYZooEVMAOtXJcxbZRs3FmGovg5RnR5w1CIz87Kmw5Wq0g9wZHMuLxC/G
u4SzwjCqwEhAVWSzsVmicLOs4y2Ndwju3ojX3kLPh02yw5xo6BpxXdZIptTvVIQn
DicTCaHU3QxxqkH7elLxNxyRYvmJbDbwKJ/hZjSRWSsJUhI4fvWoyrL6wNZ9+rTW
1zCkfEH3XikjMGHweeZc+VYu03XyohIYYn+jxpdwOjajF+3BsQSiqN1tKwj71ci/
Nk6sn+TRsq/jY6x33ULfbQCjeQ3BOGEngHTQ8N1i5D1vM2BUY/jrH6Dt1tIUdRjh
avR2KvZzzPs7Cp/094aQDX42GcQKeVOit6pF+NhE0c2uVqQCB5c6ynZwcvt0YNS9
Ty0mqIn99wgbHxVw
=SEyF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=RpyB
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...
Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
efi_queue_work() is a macro that implements the non-trivial manipulation
of the EFI runtime workqueue and completion data structure, most of
which is generic, and could be shared between all the users of the
macro. So move it out of the macro and into a new helper function.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The current code that marshalls the EFI runtime call arguments to hand
them off to a async helper does so in a type unsafe and slightly messy
manner - everything is cast to void* except for some integral types that
are passed by reference and dereferenced on the receiver end.
Let's clean this up a bit, and record the arguments of each runtime
service invocation exactly as they are issued, in a manner that permits
the compiler to check the types of the arguments at both ends.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Only the arch_efi_call_virt() macro that some architectures override
needs to be a macro, given that it is variadic and encapsulates calls
via function pointers that have different prototypes.
The associated setup and teardown code are not special in this regard,
and don't need to be instantiated at each call site. So turn them into
ordinary C functions and move them out of line.
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move scu-pd driver under genpd directory where the driver
should be.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Before adding a new FW control, its name is checked against
existing controls list. But the string length in strncmp used
to compare controls names is taken from the list, so if beginnings
of the controls are matching, then the new control is not created.
For example, if CAL_R control already exists, CAL_R_SELECTED
is not created.
The fix is to compare string lengths as well.
Fixes: 6477960755 ("ASoC: wm_adsp: Move check for control existence")
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815172908.3454056-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- A series from NXP i.MX developers (Peng Fan, etc.) to update imx-scu
and imx-scu-irq firmware drivers.
- Add dedicated lockdep class for nested genpd locks to fix a lockdep
warning in imx93-blk-ctrl driver.
- A change from Rob to explicitly include correct DT headers for i.MX
SoC drivers.
- Use devm_platform_ioremap_resource() in imx-weim bus driver.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmTYNCAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7x+wgAsB65MMhY74a8pjuO0q1nJierjc46
of2ayxR8I1jXQK/3IUijBZpg+8bnQkhXiVK1uyzvLmUc28iw1y6B2dWec/hXRld8
mc516IWjGa0Re+dOeliKPFNWzj6TZRi3TmqKIfg5XIb0poBtxBiXm7tvjm1oYRQl
ijkCqauOXJmK3yMMTQqxknGQG+B8wQDTPnbssk0A46ShD4RrYXmC3wjTEb27WoGk
nw18XT5XpS+LomctRcqza3Bcdry6YPmI0hOt9Oy9db2sBtXbz+bf9tLGKztvfxGz
44R0+Rz/XncJHwRXGgUNR71ps0+WP55qKsqoTw/zHhkS2BPl8gMxhBtQbQ==
=T2Uo
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2iHc
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers update for 6.6:
- A series from NXP i.MX developers (Peng Fan, etc.) to update imx-scu
and imx-scu-irq firmware drivers.
- Add dedicated lockdep class for nested genpd locks to fix a lockdep
warning in imx93-blk-ctrl driver.
- A change from Rob to explicitly include correct DT headers for i.MX
SoC drivers.
- Use devm_platform_ioremap_resource() in imx-weim bus driver.
* tag 'imx-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
firmware: imx: scu-irq: fix RCU complaint after M4 partition reset
firmware: imx: scu: use EOPNOTSUPP
firmware: imx: scu: use soc name for soc_id
firmware: imx: scu: increase RPC timeout
firmware: imx: scu: change init level to subsys_initcall_sync
soc: imx: Explicitly include correct DT includes
bus: imx-weim: use devm_platform_ioremap_resource
soc: imx: imx93-blk-ctrl: Add dedicated lockdep class for nested genpd locks
Link: https://lore.kernel.org/r/20230813133354.847010-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add C3 Power Domains
- Explicitly include correct DT includes in Amlogic SoC drivers
- fix to avoid potential NULL pointer dereference in meson_sm
- Merge of genpd-v6.5-rc1-1 to move genpd amlogic drivers
-----BEGIN PGP SIGNATURE-----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=eBDR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jJE/
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.6:
- Add C3 Power Domains
- Explicitly include correct DT includes in Amlogic SoC drivers
- fix to avoid potential NULL pointer dereference in meson_sm
- Merge of genpd-v6.5-rc1-1 to move genpd amlogic drivers
* tag 'amlogic-drivers-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: meson_sm: fix to avoid potential NULL pointer dereference
soc: amlogic: Explicitly include correct DT includes
soc: c3: Add support for power domains controller
dt-bindings: power: add Amlogic C3 power domains
soc: amlogic: use name instead of index as criterion
Link: https://lore.kernel.org/r/77e328b5-0d47-36e8-f62d-c745df06fb87@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230803-dt-header-cleanups-for-soc-v2-17-d8de2cc88bff@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Record SCU wakeup interrupt in /sys/power/pm_wakeup_irq
The user can further identify the exact wakeup source by using the
following interface:
cat /sys/firmware/scu_wakeup_source/wakeup_src
The above will print the wake groups and the irqs that could have
contributed to waking up the kernel. For example if ON/OFF button was the
wakeup source:
cat /sys/firmware/scu_wakeup_source/wakeup_src
Wakeup source group = 3, irq = 0x1
The user can refer to the SCFW API documentation to identify all the
wake groups and irqs.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Extract the scu irq get status code from imx_scu_irq_work_handler and
make into a new function imx_scu_irq_get_status which could be used
by others, such as SECO.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use blocking_notifier_chain instead of atomic_notifier_chain, otherwise
there will be RCU complaint, because unregister/register_virtio_device()
will issue mbox message.
mbox_send_message() is blocking again after received M4 partition reset.
Actually, no need atomic notifier for scu irq notification since this
notifier is called in worker instead of interrupt handler.
[ 389.706645] i2c-rpmsg virtio0.rpmsg-i2c-channel.-1.2: i2c rpmsg driver is removed
[ 389.767362] Wait for remote ready timeout, use first_notify.
[ 389.774084] ------------[ cut here ]------------
[ 389.778729] WARNING: CPU: 0 PID: 397 at kernel/rcu/tree_plugin.h:293 rcu_note_context_switch+0x34/0x338
[ 389.788131] Modules linked in:
[ 389.791195] CPU: 0 PID: 397 Comm: kworker/0:13 Not tainted 5.4.0-rc5-02977-g08f78722f07b #26
[ 389.799633] Hardware name: Freescale i.MX8DXL MEK (DT)
[ 389.805481] Workqueue: events imx_scu_irq_work_handler
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Same as soc-imx8m and soc-imx driver, use soc name for soc_id which is
user friendly.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When system loading is high, we can meet some command timeout
issue occasionally, so increase the timeout to a safe value.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change firmware init level to subsys_initcall_sync to ensure it's
probed before most devices to avoid unnecessary defer probe.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The bare metal decompressor code was never really intended to run in a
hosted environment such as the EFI boot services, and does a few things
that are becoming problematic in the context of EFI boot now that the
logo requirements are getting tighter: EFI executables will no longer be
allowed to consist of a single executable section that is mapped with
read, write and execute permissions if they are intended for use in a
context where Secure Boot is enabled (and where Microsoft's set of
certificates is used, i.e., every x86 PC built to run Windows).
To avoid stepping on reserved memory before having inspected the E820
tables, and to ensure the correct placement when running a kernel build
that is non-relocatable, the bare metal decompressor moves its own
executable image to the end of the allocation that was reserved for it,
in order to perform the decompression in place. This means the region in
question requires both write and execute permissions, which either need
to be given upfront (which EFI will no longer permit), or need to be
applied on demand using the existing page fault handling framework.
However, the physical placement of the kernel is usually randomized
anyway, and even if it isn't, a dedicated decompression output buffer
can be allocated anywhere in memory using EFI APIs when still running in
the boot services, given that EFI support already implies a relocatable
kernel. This means that decompression in place is never necessary, nor
is moving the compressed image from one end to the other.
Since EFI already maps all of memory 1:1, it is also unnecessary to
create new page tables or handle page faults when decompressing the
kernel. That means there is also no need to replace the special
exception handlers for SEV. Generally, there is little need to do
any of the things that the decompressor does beyond
- initialize SEV encryption, if needed,
- perform the 4/5 level paging switch, if needed,
- decompress the kernel
- relocate the kernel
So do all of this from the EFI stub code, and avoid the bare metal
decompressor altogether.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-24-ardb@kernel.org
Before refactoring the EFI stub boot flow to avoid the legacy bare metal
decompressor, duplicate the SNP feature check in the EFI stub before
handing over to the kernel proper.
The SNP feature check can be performed while running under the EFI boot
services, which means it can force the boot to fail gracefully and
return an error to the bootloader if the loaded kernel does not
implement support for all the features that the hypervisor enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-23-ardb@kernel.org
x86 will need to limit the kernel memory allocation to the lowest 512
MiB of memory, to match the behavior of the existing bare metal KASLR
physical randomization logic. So in preparation for that, add a limit
parameter to efi_random_alloc() and wire it up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-22-ardb@kernel.org
Currently, the EFI stub relies on DXE services in some cases to clear
non-execute restrictions from page allocations that need to be
executable. This is dodgy, because DXE services are not specified by
UEFI but by PI, and they are not intended for consumption by OS loaders.
However, no alternative existed at the time.
Now, there is a new UEFI protocol that should be used instead, so if it
exists, prefer it over the DXE services calls.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-18-ardb@kernel.org
In preparation for updating the EFI stub boot flow to avoid the bare
metal decompressor code altogether, implement the support code for
switching between 4 and 5 levels of paging before jumping to the kernel
proper.
Reuse the newly refactored trampoline that the bare metal decompressor
uses, but relies on EFI APIs to allocate 32-bit addressable memory and
remap it with the appropriate permissions. Given that the bare metal
decompressor will no longer call into the trampoline if the number of
paging levels is already set correctly, it is no longer needed to remove
NX restrictions from the memory range where this trampoline may end up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-17-ardb@kernel.org
The so-called EFI handover protocol is value-add from the distros that
permits a loader to simply copy a PE kernel image into memory and call
an alternative entrypoint that is described by an embedded boot_params
structure.
Most implementations of this protocol do not bother to check the PE
header for minimum alignment, section placement, etc, and therefore also
don't clear the image's BSS, or even allocate enough memory for it.
Allocating more memory on the fly is rather difficult, but at least
clear the BSS region explicitly when entering in this manner, so that
the EFI stub code does not get confused by global variables that were
not zero-initialized correctly.
When booting in mixed mode, this BSS clearing must occur before any
global state is created, so clear it in the 32-bit asm entry point.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-7-ardb@kernel.org
Now that the EFI entry code in assembler is only used by the optional
and deprecated EFI handover protocol, and given that the EFI stub C code
no longer returns to it, most of it can simply be dropped.
While at it, clarify the symbol naming, by merging efi_main() and
efi_stub_entry(), making the latter the shared entry point for all
different boot modes that enter via the EFI stub.
The efi32_stub_entry() and efi64_stub_entry() names are referenced
explicitly by the tooling that populates the setup header, so these must
be retained, but can be emitted as aliases of efi_stub_entry() where
appropriate.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-5-ardb@kernel.org
Instead of returning to the calling code in assembler that does nothing
more than perform an indirect call with the boot_params pointer in
register ESI/RSI, perform the jump directly from the EFI stub C code.
This will allow the asm entrypoint code to be dropped entirely in
subsequent patches.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-4-ardb@kernel.org
Support for configuring TRISTATE parameter is added in ZYNQMP PMUFW(Xilinx
ZynqMP Platform Management Firmware) Configuration Param Set version 2.0.
If the requested configuration is TRISTATE and platform is ZYNQMP then
check the version before requesting Xilinx firmware to set the
configuration.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230731095026.3766675-3-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add function to get family code and sub family code from the idcode. This
family code and sub family code helps to identify the platform.
Family code of any platform is on bits 21 to 27 and Sub family code is on
bits 19 and 20.
Signed-off-by: Dhaval Shah <dhaval.r.shah@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230731095026.3766675-2-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Interrupts are blocked in SDEI context, per the SDEI spec: "The client
interrupts cannot preempt the event handler." If we crashed in the SDEI
handler-running context (as with ACPI's AGDI) then we need to clean up the
SDEI state before proceeding to the crash kernel so that the crash kernel
can have working interrupts.
Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME
the handler, discarding the interrupted context.
Fixes: f5df269618 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking")
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: stable@vger.kernel.org
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/20230627002939.2758-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Extend Intel Remote System Update (RSU) driver to get SPT
(Sub-Partition Table) addresses. The query SPT address can be used
to determine if the RSU QSPI layout is 32kB or 64kB aligned.
The alignment can be determined by minus the upper with the lower of
the SPT addresses.
This patch depends on patch:
firmware: stratix10-svc: Generic Mailbox Command
Signed-off-by: Radu Bacrau <radu.bacrau@intel.com>
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20230727192907.982070-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add generic mailbox command that can support SDM command. User can use this
command to send SDM mailbox command. User have to specified an input file
which contain the command data and an output file for SDM response to be
copied over.
Signed-off-by: Teh Wen Ping <wen.ping.teh@intel.com>
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20230727192907.982070-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The coreboot framebuffer driver registers a "simple-framebuffer" device
based on the information from the firmware, after checking that it's
compatible with the formats listed in simplefb.h. It was added before
simpledrm, and its Kconfig marked as dependent on the simplefb driver.
The simpledrm driver can also handle "simple-framebuffer" devices and
the coreboot framebuffer works fine with it on a 'Lick' Chromebook.
Allow building the coreboot framebuffer driver with simpledrm as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20230725174334.887485-1-alpernebiyasak@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_match_device() may fail and returns a NULL pointer.
Fix this by checking the return value of of_match_device.
Fixes: 8cde3c2153 ("firmware: meson_sm: Rework driver as a proper platform driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/tencent_AA08AAA6C4F34D53ADCE962E188A879B8206@qq.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
SCMI v3.2 adds PERF protocol support to optionally define performance
domains that cannot be represented on a linear scale; the platform firmware
can declare the performance levels of a domain as being 'level indexed' and
provide an indicative frequency associated to each of those levels, with
such indexes not required anymore to be contiguous nor to satisfy any
linear-scaling constraint: when level-indexing is available for a domain,
the platform will expect to deal with SCMI requests using indexes instead
of performance levels for that domain.
Add level-indexing mode support to the PERF protocol implementation while
maintaining unchanged the protocol operations interface exposed by PERF;
all the required mapping from performamce levels/frequencies to the
corresponding level indexes is carried out transparently by the core PERF
protocol support: as a consequence no change is either required in any
SCMI driver using the PERF protocol, even when using level indexing.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230717161246.1761777-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We don't want absolute symbols references in the stub, so fix the double
negation in the comment.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The devm_memremap() function returns error pointers.
It never returns NULL. Fix the check.
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Ming <machel@vivo.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20230727193750.983795-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are three categories of compatibles within the driver:
1. Ones which were introduced without a qcom,scm fallback
2. Ones which were introduced with a qcom,scm fallback
3. Ones which were defined but never used
Keep 1 for backwards compatibility and axe 2 & 3.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230623-topic-scm_cleanup-v2-3-9db8c583138d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If devm_clk_get_optional throws an error, something is really wrong.
It may be a probe deferral, or it may be a problem with the clock
provider.
Regardless of what it may be, it should definitely not be ignored.
Stop doing that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230623-topic-scm_cleanup-v2-2-9db8c583138d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The code for handling more than 1 clock is a bit messy and requires
one to add new, SoC-specific compatibles if one wants to attach a clock.
Switch devm_clk_get to devm_clk_get_optional to prevent throwing it
from throwing errors when the clock is absent and defer checking the
clock requirements to dt schema.
This lets us get rid of compatibles that aren't necessary for backwards
compatibility *and* will hopefully prevent the addition of meaningless
new compatibles.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230623-topic-scm_cleanup-v2-1-9db8c583138d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SCMI transport based on SMC can optionally use an additional IRQ to
signal message completion. The associated interrupt handler is currently
allocated using devres but on shutdown the core SCMI stack will call
.chan_free() well before any managed cleanup is invoked by devres.
As a consequence, the arrival of a late reply to an in-flight pending
transaction could still trigger the interrupt handler well after the
SCMI core has cleaned up the channels, with unpleasant results.
Inhibit further message processing on the IRQ path by explicitly freeing
the IRQ inside .chan_free() callback itself.
Fixes: dd820ee21d ("firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230719173533.2739319-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The OF node reference obtained from of_parse_phandle() should be dropped
if node is not compatible with arm,scmi-shmem.
Fixes: 507cd4d2c5 ("firmware: arm_scmi: Add compatibility checks for shmem node")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230719061652.8850-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Handle signed error return values returned by simple_write_to_buffer().
In case of an error, return the error code.
Fixes: 3c3d818a93 ("firmware: arm_scmi: Add core raw transmission support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20230718085529.258899-1-sukrut.bellary@linux.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Commit 35727af2b1 ("irqchip/gicv3: Workaround for NVIDIA erratum
T241-FABRIC-4") moved the initialisation of the SoC version to
arm_smccc_version_init() but forgot to update the results structure
and it's usage.
Fix the use of the uninitialised results structure and update the
error strings.
Fixes: 35727af2b1 ("irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4")
Signed-off-by: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230717171702.424253-1-punit.agrawal@bytedance.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmSvvRAACgkQaA3BHVML
eiNpGQgAs8jq1XjN9t8jZsdgXnoCbkZyVUI2NO0HwoVwpRCLgbXp5AX5qq2oRciE
TBhe4Fceh/ZsYqHTZQahnguxgRKM5JgXwbI4Z0iiOVcqasNbycaKAqipxJJ7kdo1
qPhGCbgQFVX7oIq2xjfXehh6O0SYX+R9r88X8dMJxMYv/pcLwOHG74kS040WOcQq
uATgcnobOf/D8ZmlqvfKGAeTUoFo/RSR2Uhlauka58qgeUbicrTELZT2barY9d+k
as6U5vv4wx2zMklTkjrlkMpAT1ZpbB9d3jGHwL27VEnjlfd3wV2bdH7Dzn9qZRf/
gn0ALg/b3u5yBWk/k7YBvijXyNcH6Q==
=bBuG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
Fix up documentation errors, squashes the following warnings:
drivers/firmware/ti_sci.c:1986: warning: Excess function parameter 'vint_irq' description in 'ti_sci_cmd_set_irq'
drivers/firmware/ti_sci.c:2034: warning: Excess function parameter 'vint_irq' description in 'ti_sci_cmd_free_irq'
drivers/firmware/ti_sci.c:2630: warning: Function parameter or member 'bootvector' not described in 'ti_sci_cmd_proc_set_config'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'bv' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'cfg_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'ctrl_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'sts_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: expecting prototype for ti_sci_cmd_get_boot_status(). Prototype was for ti_sci_cmd_proc_get_status() instead
drivers/firmware/ti_sci.c:3265: warning: Function parameter or member 'sub_type' not described in 'devm_ti_sci_get_resource'
drivers/firmware/ti_sci.c:3265: warning: Excess function parameter 'suub_type' description in 'devm_ti_sci_get_resource'
Link: https://lore.kernel.org/r/20230621021619.265162-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit b9e8a7d950 ("firmware: ti_sci: Switch transport to polled
mode during system suspend") aims to resolve issues with tisci
operations during system suspend operation. However, the system may
enter a no_irq stage in various other usage modes, including power-off
and restart. To determine if polling mode is appropriate, use the
system_state instead.
While at this, drop the unused is_suspending state variable and
related helpers.
Fixes: b9e8a7d950 ("firmware: ti_sci: Switch transport to polled mode during system suspend")
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Reported-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62
Link: https://lore.kernel.org/r/20230620130329.4120443-1-nm@ti.com
Closes: https://lore.kernel.org/all/ZGeHMjlnob2GFyHF@francesco-nb.int.toradex.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
The header file <linux/efi.h> does not need anything from
<linux/screen_info.h>. Declare struct screen_info and remove
the include statements. Update a number of source files that
require struct screen_info's definition.
v2:
* update loongarch (Jingfeng)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706104852.27451-2-tzimmermann@suse.de
Here is the big set of char/misc and other driver subsystem updates for
6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates
on top of that, lots of small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz
recBPLH0ZACKl0wPl4iZ
=A83A
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
Although some more stuff is brewing, the EFI changes that are ready for
mainline are few, so not a lot to pull this cycle:
- improve the PCI DMA paranoia logic in the EFI stub
- some constification changes
- add statfs support to efivarfs
- allow user space to enumerate updatable firmware resources without
CAP_SYS_ADMIN
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZJ1jIwAKCRAwbglWLn0t
XDs8AP9PAAWIgukyXkYpoxabaQQK1Pqw6Zv63XAcNYBHa4zjHwD/UTcYviQIlI0B
Rfj4i8pDQVVfReSI+lKWvhXfRQ5Qbgs=
=w6zX
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Although some more stuff is brewing, the EFI changes that are ready
for mainline are few this cycle:
- improve the PCI DMA paranoia logic in the EFI stub
- some constification changes
- add statfs support to efivarfs
- allow user space to enumerate updatable firmware resources without
CAP_SYS_ADMIN"
* tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Disable PCI DMA before grabbing the EFI memory map
efi/esrt: Allow ESRT access without CAP_SYS_ADMIN
efivarfs: expose used and total size
efi: make kobj_type structure constant
efi: x86: make kobj_type structure constant
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----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=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware. This can be used to
distinguish between pci link down and firmware getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795
-----BEGIN PGP SIGNATURE-----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=FmUA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Loongson
platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP
platforms with NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas
Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1 driver
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmScAA8OHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8rGg/+MZtQVa/uPAS914pTaBbwr0JTmaZwnroCYAGZ
VF708hXDoqdJMXkVyBxogpBGdydwCCEIPZ6TKslslIjxz1eojATN1BiAlYDSrTOL
TYORARXJ+HLHK8/okCucIAl7A1CNxRHBUfSqgN7N6OWfYY/Rd8JL6mIuL8M0rPkT
dAN219q/+GVMckiUVVSo78SRZL93S6TiQkcomeA3SoB3ycGCkaDD9Leb4vwr6iPa
Yytcf/DWWD5plEEZFVzuyT1KTyi3HhcVZYF29QaoZaSkNIBwUJV7IObz+zJTs5BC
/CgudWbQ/uhgiOucKNId+7sG04ehTJgKDRVZ6ArQt2p0aLC8KZKB+ytt9QHdCPlZ
czQX86PjQ4DeivvTaoFvqjDfDFosSWkHWYxqA0fEEVd7p+6ZrhmZdmtidFxF5/Oq
Dk0AFRwc71w4/OZU83lYv2BLXaqGVZ8ptmeEILaAJoxkpWwomHYW5nYFZ2Pnb8h3
Yl9Q0f82uFNqfPcGJLSpqJ/Or9BVI2qQU75gHHXIe1GXUAaHkLLRPfpzQtGjkPap
KC0+VMGEWy0y0mdytt0ecIkz2Dv/RvlahTr5jHEXSb3r93H6nRTTjxzyLvXHoPy0
4iVf1g7VPL69V3vZ6AlkPdMo/yV7q/72bP0ZJ6CgVtdOZO4Q1N8ItwFt8FN0nAcu
FeYq8pg=
=GuXv
-----END PGP SIGNATURE-----
Merge tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google
Chameleon, Ingenic X1000, Intel systems with various CODECs,
Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton
NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive
JH7110, Texas Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1
driver"
* tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits)
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook
ASoC: hdmi-codec: fix channel info for compressed formats
ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats
ASoC: core: Always store of_node when getting DAI link component
ASoC: tas2781: Fix error code in tas2781_load_calibration()
ASoC: amd: update pm_runtime enable sequence
ALSA: ump: Export MIDI1 / UMP conversion helpers
ASoC: tas2781: fix Kconfig dependencies
ASoC: amd: acp: remove acp poweroff function
ASoC: amd: acp: clear pdm dma interrupt mask
ASoC: codecs: max98090: Allow dsp_a mode
ASoC: qcom: common: add default jack dapm pins
ASoC: loongson: fix address space confusion
ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints
ASoC: tegra: Remove stale comments in AHUB
ASoC: tegra: Use normal system sleep for ASRC
ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio
ASoC: fsl-asoc-card: Allow passing the number of slots in use
ASoC: codecs: wsa884x: Add WSA884x family of speakers
ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZJp4CgAKCRCAXGG7T9hj
vmmpAP4gMe7T2QXWY9VvWgyf97z3AtBx2NdTzLAmArFySzPFtgEAgCHE3yy95bmR
JAX4+q/2QPbFxp0TgJrrxlq5RDn5Ago=
=2HjA
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.5-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- three patches adding missing prototypes
- a fix for finding the iBFT in a Xen dom0 for supporting diskless
iSCSI boot
* tag 'for-linus-6.5-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86: xen: add missing prototypes
x86/xen: add prototypes for paravirt mmu functions
iscsi_ibft: Fix finding the iBFT under Xen Dom 0
xen: xen_debug_interrupt prototype to global header
Currently, the EFI stub will disable PCI DMA as the very last thing it
does before calling ExitBootServices(), to avoid interfering with the
firmware's normal operation as much as possible.
However, the stub will invoke DisconnectController() on all endpoints
downstream of the PCI bridges it disables, and this may affect the
layout of the EFI memory map, making it substantially more likely that
ExitBootServices() will fail the first time around, and that the EFI
memory map needs to be reloaded.
This, in turn, increases the likelihood that the slack space we
allocated is insufficient (and we can no longer allocate memory via boot
services after having called ExitBootServices() once), causing the
second call to GetMemoryMap (and therefore the boot) to fail. This makes
the PCI DMA disable feature a bit more fragile than it already is, so
let's make it more robust, by allocating the space for the EFI memory
map after disabling PCI DMA.
Fixes: 4444f8541d ("efi: Allow disabling PCI busmastering on bridges during boot")
Reported-by: Glenn Washburn <development@efficientek.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using it
and thus preventing a whole set of attacks against such guests like
memory replay and the like.
There are a couple of strategies of how memory should be accepted
- the current implementation does an on-demand way of accepting.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmSZ0f4ACgkQEsHwGGHe
VUpasw//RKoNW9HSU1csY+XnG9uuaT6QKgji+gIEZWWIGPO9iibvbBj6P5WxJE8T
fe7yb6CGa6d6thoU0v+mQGVVvCd7OjCFwPD5wAo4mXToD7Ig+4mI6jMkaKifqa2f
N1Uuy8u/zQnGyWrP5Y//WH5bJYfsmds4UGwXI2nLvKlhE7MG90/ePjt7iqnnwZsy
waLp6a0Q1VeOvnfRszFLHZw/SoER5RSJ4qeVqttkFNmPPEKMK1Kirrl2poR56OQJ
nMr6LqVtD7erlSJ36VRXOKzLI443A4iIEIg/wBjIOU6L5ZEWJGNqtCDnIqFJ6+TM
XatsejfRYkkMZH0qXtX9+M0u+HJHbZPCH5rEcA21P3Nbd7od/ANq91qCGoMjtUZ4
7pZohMG8M6IDvkLiOb8fQVkR5k/9Jbk8UvdN/8jdPx1ERxYMFO3BDvJpV2gzrW4B
KYtFTPR7j2nY3eKfDpe3flanqYzKUBsKoTlLnlH7UHaiMZ2idwG8AQjlrhC/erCq
/Lq1LXt4Mq46FyHABc+PSHytu0WWj1nBUftRt+lviY/Uv7TlkBldOTT7wm7itsfF
HUCTfLWl0CJXKPq8rbbZhAG/exN6Ay6MO3E3OcNq8A72E5y4cXenuG3ic/0tUuOu
FfjpiMk35qE2Qb4hnj1YtF3XINtd1MpKcuwzGSzEdv9s3J7hrS0=
=FS95
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
To facilitate diskless iSCSI boot, the firmware can place a table of
configuration details in memory called the iBFT. The presence of this
table is not specified, nor is the precise location (and it's not in the
E820) so the kernel has to search for a magic marker to find it.
When running under Xen, Dom 0 does not have access to the entire host's
memory, only certain regions which are identity-mapped which means that
the pseudo-physical address in Dom0 == real host physical address.
Add the iBFT search bounds as a reserved region which causes it to be
identity-mapped in xen_set_identity_and_remap_chunk() which allows Dom0
access to the specific physical memory to correctly search for the iBFT
magic marker (and later access the full table).
This necessitates moving the call to reserve_ibft_region() somewhat
later so that it is called after e820__memory_setup() which is when the
Xen identity mapping adjustments are applied. The precise location of
the call is not too important so I've put it alongside dmi_setup() which
does similar scanning of memory for configuration tables.
Finally in the iBFT find code, instead of using isa_bus_to_virt() which
doesn't do the right thing under Xen, use early_memremap() like the
dmi_setup() code does.
The result of these changes is that it is possible to boot a diskless
Xen + Dom0 running off an iSCSI disk whereas previously it would fail to
find the iBFT and consequently, the iSCSI root disk.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Link: https://lore.kernel.org/r/20230605102840.1521549-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Couple of main additions :-
1. Support for multiple SMC/HVC transports for SCMI:
Some platforms need to support multiple SCMI instances within
a platform(more commonly in a VM). The same SMC/HVC FID is used with
all the instances. The platform or the hypervisor needs a way to
distinguish among SMC/HVC calls made from different instances.
This change adds support for passing shmem channel address as the
parameters in the SMC/HVC call. The address is split into 4KB-page
and offset for simiplicity.
2. Addition od SCMI v3.2 explicit powercap enable/disable support:
SCMI v3.2 specification introduces support to disable powercapping
as a whole on the desired zones.
This change adds the needed support to the core SCMI powercap protocol,
exposing enable/disable protocol operations and then wiring up the new
operartions in the related powercap framework helpers.
-----BEGIN PGP SIGNATURE-----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=uVB0
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ze5+
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.5
Couple of main additions :-
1. Support for multiple SMC/HVC transports for SCMI:
Some platforms need to support multiple SCMI instances within
a platform(more commonly in a VM). The same SMC/HVC FID is used with
all the instances. The platform or the hypervisor needs a way to
distinguish among SMC/HVC calls made from different instances.
This change adds support for passing shmem channel address as the
parameters in the SMC/HVC call. The address is split into 4KB-page
and offset for simiplicity.
2. Addition od SCMI v3.2 explicit powercap enable/disable support:
SCMI v3.2 specification introduces support to disable powercapping
as a whole on the desired zones.
This change adds the needed support to the core SCMI powercap protocol,
exposing enable/disable protocol operations and then wiring up the new
operartions in the related powercap framework helpers.
* tag 'scmi-updates-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
powercap: arm_scmi: Add support for disabling powercaps on a zone
firmware: arm_scmi: Add Powercap protocol enable support
firmware: arm_scmi: Refactor the internal powercap get/set helpers
firmware: arm_scmi: Augment SMC/HVC to allow optional parameters
dt-bindings: firmware: arm,scmi: support for parameter in smc/hvc call
Link: https://lore.kernel.org/r/20230612121017.4108104-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for using system memory as shared memory between the
CPU and the BPMP, which will be needed for Tegra264 support.
-----BEGIN PGP SIGNATURE-----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=fwZn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3AXn
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.5-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.5-rc1
This adds support for using system memory as shared memory between the
CPU and the BPMP, which will be needed for Tegra264 support.
* tag 'tegra-for-6.5-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
Link: https://lore.kernel.org/r/20230609193620.2275240-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSPcdMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWrQH/3KmuvZsWMC4PpJY
VcF9VfF9i+Zv7DoG8sjD5VpNh47e87RsR6WNOFnKol5SUrM6vsBAb5i2rfQahNIv
NSj0fPCE4/Nj9LMecKVC9WD8CitxYdbR+CF9Is21AQj1VihUl9eHXGcAWxuaMyhk
TjPUwmbOOsRVMXXdGJzjX78cvLsxqpSv8A/5OTh16IBimbh7p+YjKJFkbfj/PMWf
aF1quFkIEXgzJcHCpP6KDZHr2KbpY+jIN9hUENnGKJxHYNso5u+KrIW1kAm8meP1
x26ETSquM0T70OAzovOWg+BeVkLDac/3Rh30ztLAI4AtajrlSzycvFsU9UNEJCc2
BnM2IZI=
=ANT5
-----END PGP SIGNATURE-----
Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just a few small fixes. The only change to the core code is for a
minor race in ALSA OSS sequencer, and the rest are all device-specific
fixes (regression fixes and a usual quirk).
-----BEGIN PGP SIGNATURE-----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=e2QB
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes. The only change to the core code is for a
minor race in ALSA OSS sequencer, and the rest are all device-specific
fixes (regression fixes and a usual quirk)"
* tag 'sound-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add quirk flag for HEM devices to enable native DSD playback
ALSA: usb-audio: Fix broken resume due to UAC3 power state
ALSA: seq: oss: Fix racy open/close of MIDI devices
ASoC: tegra: Fix Master Volume Control
ALSA: hda/realtek: Add a quirk for Compaq N14JP6
firmware: cs_dsp: Log correct region name in bin error messages
svc_create_memory_pool() is only called from stratix10_svc_drv_probe().
Most of resources in the probe are managed, but not this memremap() call.
There is also no memunmap() call in the file.
So switch to devm_memremap() to avoid a resource leak.
Cc: stable@vger.kernel.org
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Link: https://lore.kernel.org/all/783e9dfbba34e28505c9efa8bba41f97fd0fa1dc.1686109400.git.christophe.jaillet@wanadoo.fr/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Message-ID: <20230613211521.16366-1-dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most of the changes this time are for the Qualcomm Snapdragon platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon, rpmh-rsc,
ramp_controller and rmtfs driver as well as the AMD tee firmware
driver and a missing initialization in the Arm ff-a firmware driver.
The Qualcomm RPMh and EDAC drivers need some rework to work correctly
on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable
properties on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire.
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV.
-----BEGIN PGP SIGNATURE-----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=auoN
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
Implement support for DRAM MRQ GSCs.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
[treding@nvidia.com: drop unnecessary discrimination enum]
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc-power
- Use of_property_present() instead of of_find_property()
soc-event
- Avoid use after free eve_data in event manager code
firmware:
- Extend zynqmp_pm_fpga_load() interface
MAINTAINERS:
- Clean xilinx records
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZIHD3QAKCRDKSWXLKUoM
IVfvAJ9OBqaOdnRbJ6R5Kax5TL5R02aMAwCeLqYRsXp9ZeaYw1jRfANnJrP10DU=
=5lzm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Tj0D
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-soc-for-v6.5' of https://github.com/Xilinx/linux-xlnx into soc/drivers
arm64: ZynqMP SoC changes for v6.5
soc-power
- Use of_property_present() instead of of_find_property()
soc-event
- Avoid use after free eve_data in event manager code
firmware:
- Extend zynqmp_pm_fpga_load() interface
MAINTAINERS:
- Clean xilinx records
* tag 'zynqmp-soc-for-v6.5' of https://github.com/Xilinx/linux-xlnx:
MAINTAINERS: Switch to @amd.com emails
MAINTAINERS: Remove Hyun and Anurag from maintainer list
firmware: xilinx: Update the zynqmp_pm_fpga_load() API
driver: soc: xilinx: use _safe loop iterator to avoid a use after free
soc: xilinx: Use of_property_present() for testing DT property presence
Link: https://lore.kernel.org/r/411aee78-e7e8-5966-cbe8-40ff45e27ba2@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The UEFI v2.9 specification includes a new memory type to be used in
environments where the OS must accept memory that is provided from its
host. Before the introduction of this memory type, all memory was
accepted eagerly in the firmware. In order for the firmware to safely
stop accepting memory on the OS's behalf, the OS must affirmatively
indicate support to the firmware. This is only a problem for AMD
SEV-SNP, since Linux has had support for it since 5.19. The other
technology that can make use of unaccepted memory, Intel TDX, does not
yet have Linux support, so it can strictly require unaccepted memory
support as a dependency of CONFIG_TDX and not require communication with
the firmware.
Enabling unaccepted memory requires calling a 0-argument enablement
protocol before ExitBootServices. This call is only made if the kernel
is compiled with UNACCEPTED_MEMORY=y
This protocol will be removed after the end of life of the first LTS
that includes it, in order to give firmware implementations an
expiration date for it. When the protocol is removed, firmware will
strictly infer that a SEV-SNP VM is running an OS that supports the
unaccepted memory type. At the earliest convenience, when unaccepted
memory support is added to Linux, SEV-SNP may take strict dependence in
it. After the firmware removes support for the protocol, this should be
reverted.
[tl: address some checkscript warnings]
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/0d5f3d9a20b5cf361945b7ab1263c36586a78a42.1686063086.git.thomas.lendacky@amd.com
load_unaligned_zeropad() can lead to unwanted loads across page boundaries.
The unwanted loads are typically harmless. But, they might be made to
totally unrelated or even unmapped memory. load_unaligned_zeropad()
relies on exception fixup (#PF, #GP and now #VE) to recover from these
unwanted loads.
But, this approach does not work for unaccepted memory. For TDX, a load
from unaccepted memory will not lead to a recoverable exception within
the guest. The guest will exit to the VMM where the only recourse is to
terminate the guest.
There are two parts to fix this issue and comprehensively avoid access
to unaccepted memory. Together these ensure that an extra "guard" page
is accepted in addition to the memory that needs to be used.
1. Implicitly extend the range_contains_unaccepted_memory(start, end)
checks up to end+unit_size if 'end' is aligned on a unit_size
boundary.
2. Implicitly extend accept_memory(start, end) to end+unit_size if 'end'
is aligned on a unit_size boundary.
Side note: This leads to something strange. Pages which were accepted
at boot, marked by the firmware as accepted and will never
_need_ to be accepted might be on unaccepted_pages list
This is a cue to ensure that the next page is accepted
before 'page' can be used.
This is an actual, real-world problem which was discovered during TDX
testing.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230606142637.5171-7-kirill.shutemov@linux.intel.com
efi_config_parse_tables() reserves memory that holds unaccepted memory
configuration table so it won't be reused by page allocator.
Core-mm requires few helpers to support unaccepted memory:
- accept_memory() checks the range of addresses against the bitmap and
accept memory if needed.
- range_contains_unaccepted_memory() checks if anything within the
range requires acceptance.
Architectural code has to provide efi_get_unaccepted_table() that
returns pointer to the unaccepted memory configuration table.
arch_accept_memory() handles arch-specific part of memory acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230606142637.5171-6-kirill.shutemov@linux.intel.com
UEFI Specification version 2.9 introduces the concept of memory
acceptance: Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, requiring memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific for the Virtual
Machine platform.
Accepting memory is costly and it makes VMM allocate memory for the
accepted guest physical address range. It's better to postpone memory
acceptance until memory is needed. It lowers boot time and reduces
memory overhead.
The kernel needs to know what memory has been accepted. Firmware
communicates this information via memory map: a new memory type --
EFI_UNACCEPTED_MEMORY -- indicates such memory.
Range-based tracking works fine for firmware, but it gets bulky for
the kernel: e820 (or whatever the arch uses) has to be modified on every
page acceptance. It leads to table fragmentation and there's a limited
number of entries in the e820 table.
Another option is to mark such memory as usable in e820 and track if the
range has been accepted in a bitmap. One bit in the bitmap represents a
naturally aligned power-2-sized region of address space -- unit.
For x86, unit size is 2MiB: 4k of the bitmap is enough to track 64GiB or
physical address space.
In the worst-case scenario -- a huge hole in the middle of the
address space -- It needs 256MiB to handle 4PiB of the address
space.
Any unaccepted memory that is not aligned to unit_size gets accepted
upfront.
The bitmap is allocated and constructed in the EFI stub and passed down
to the kernel via EFI configuration table. allocate_e820() allocates the
bitmap if unaccepted memory is present, according to the size of
unaccepted region.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230606142637.5171-4-kirill.shutemov@linux.intel.com
Currently allocate_e820() is only interested in the size of map and size
of memory descriptor to determine how many e820 entries the kernel
needs.
UEFI Specification version 2.9 introduces a new memory type --
unaccepted memory. To track unaccepted memory, the kernel needs to
allocate a bitmap. The size of the bitmap is dependent on the maximum
physical address present in the system. A full memory map is required to
find the maximum address.
Modify allocate_e820() to get a full memory map.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230606142637.5171-3-kirill.shutemov@linux.intel.com
Access to the files in /sys/firmware/efi/esrt has been restricted to
CAP_SYS_ADMIN since support for ESRT was added, but this seems overly
restrictive given that the files are read-only and just provide
information about UEFI firmware updates.
Remove the CAP_SYS_ADMIN restriction so that a non-root process can read
the files, provided a suitably-privileged process changes the file
ownership first. The files are still read-only and still owned by root
by default.
Signed-off-by: Nicholas Bishop <nicholasbishop@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A single fix addressing another MBZ field being non-zero and non-compliant
resulting in the rejection of certain memory interface transmissions by
the receivers(secure partitions). The issue was addressed before but missed
to address this one field which is part of this change.
-----BEGIN PGP SIGNATURE-----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=5rRh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jD2K
-----END PGP SIGNATURE-----
Merge tag 'ffa-fix-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.4
A single fix addressing another MBZ field being non-zero and non-compliant
resulting in the rejection of certain memory interface transmissions by
the receivers(secure partitions). The issue was addressed before but missed
to address this one field which is part of this change.
* tag 'ffa-fix-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Set handle field to zero in memory descriptor
Link: https://lore.kernel.org/r/20230606125720.2816923-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SCMI powercap protocol v3.2 supports disabling the powercap on a zone
by zone basis by providing a zero valued powercap.
Expose new operations to enable/disable powercapping on a per-zone base.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230531152039.2363181-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
