[ Upstream commit 284d16c456 ]
The ti_am335x_tscadc is specific to some TI SoCs, update
the dependencies for those SoCs and compile testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220155643.445849-1-pbrobinson@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
FP9931 is a PMIC IC which comes from Fitipower Corp. It can
be used to for voltages power on or down sequence and timing
configuration for different e-ink panels, and also it has a
thermistor for temperature detection. Add this core driver
to handle regulators device and hwmon device.
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Reviewed-by: G.n. Zhou <guoniu.zhou@nxp.com>
Add PMIC 'MAX17135' module drivers to 4.1.y kernel. These are necessary
to supply power for E-ink panel display functions.
Signed-off-by: Robby Cai <r63905@freescale.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Multi function driver for flexible io driver found
on imx8ulp, imx9x SoC
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
ADP5585 support multi function, include expander GPIO, pwm, keypad controller.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
(cherry picked from commit ad20e1cc8a)
Since GMSL link setup and initialization requires procedures that need
to be executed in a precise sequence, we cannot successfully finish the
setup during drivers' probe() routines as, at some point, we need to
instruct the serializer to reset the GMSL links after the deserializer
GMSL parameters were set. This layer will take care of finishing the
GMSL links' initialization after all SerDes chip probe() routines
completed.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Robert Chiras <robert.chiras@nxp.com>
The MAX96752/MAX96754 deserializers convert a single or dual-link GMSL
serial input to single or dual OLDI. They also send and receive
side-channel and peripheral control data, enabling full-duplex,
single-wire transmission of video and bidirectional data.
This driver adds the core support with separate drivers adding
support for video or audio.
GPIO support is included in the core part as this is not a GPIO
controller in the Linux sense. It performs GPIO tunneling, translating
GPIO pin transitions from local side to the remote side and viceversa.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Robert Chiras <robert.chiras@nxp.com>
The MAX96789/MAX96791 family of serializers convert dual MIPI DSI,
four-lane input port data to dual Maxim Integrated’s GMSL 1 or 2
high-speed serial link protocol. They also send and receive
side-channel and peripheral control data, enabling full-duplex,
single-wire, transmission of video and bidirectional data.
This driver adds the core support with separate drivers adding support
for video or audio.
GPIO support is included in the core part as this is not a GPIO
controller in the Linux sense. It performs GPIO tunneling, translating
GPIO pin transitions from local side to the remote side and viceversa.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Robert Chiras <robert.chiras@nxp.com>
MFD_CS42L43 depends on REGMAP_IRQ as it uses devm_regmap_add_irq_chip.
Otherwise the build may fail with following log.
AR drivers/built-in.a
AR built-in.a
AR vmlinux.a
LD vmlinux.o
OBJCOPY modules.builtin.modinfo
GEN modules.builtin
MODPOST Module.symvers
ERROR: modpost: "devm_regmap_add_irq_chip" [drivers/mfd/cs42l43.ko] undefined!
Fixes: ace6d14481 ("mfd: cs42l43: Add support for cs42l43 core driver")
Signed-off-by: Woody Zhang <woodylab@foxmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/tencent_E54C7156F583E15FFE320E576E3389C39A08@qq.com
Signed-off-by: Lee Jones <lee@kernel.org>
Modified Kconfig to enable module build support for RZ/G2L MTU3a driver.
While at it, added module.h header file.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230711092841.119161-1-biju.das.jz@bp.renesas.com
Signed-off-by: Lee Jones <lee@kernel.org>
There is no reason for MFD_RK8XX to be bool, all drivers that depend on
it, or that select it, are tristate.
Fixes: c20e8c5b12 ("mfd: rk808: Split into core and i2c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/d132363fc9228473e9e652b70a3761b94de32d70.1688475844.git.geert+renesas@glider.be
Signed-off-by: Lee Jones <lee@kernel.org>
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The MFD component registers and initialises the device and provides
PM/system power management.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-4-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
MFD driver for MAX77541/MAX77540 to enable its sub devices.
The MAX77541 is a multi-function devices. It includes buck converter and ADC.
The MAX77540 is a high-efficiency buck converter with two 3A switching phases.
They have same regmap except for ADC part of MAX77541.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230412111256.40013-6-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
The previous version of this driver included wildcards in file names
and descriptions. This patch renames the driver to only support MAX5970
and MAX5978, which are the only chips that the driver actually supports.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230427113046.3971425-1-Naresh.Solanki@9elements.com
Signed-off-by: Lee Jones <lee@kernel.org>
This patch adds support for TPS6594 PMIC MFD core. It provides
communication through the I2C and SPI interfaces, and supports
protocols with embedded CRC data fields for safety applications.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20230511095126.105104-3-jpanis@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for SPI connected rk806, which is used by the RK3588
evaluation boards. The PMIC is advertised to support I2C and SPI,
but the evaluation boards all use SPI. Thus only SPI support is
added here.
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-9-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
Split rk808 into a core and an i2c part in preparation for
SPI support.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in
the Renesas RZ/G2L family SoCs. It consists of eight 16-bit timer
channels and one 32-bit timer channel. It supports the following
functions
- Counter
- Timer
- PWM
The 8/16/32 bit registers are mixed in each channel.
Add MTU3a core driver for RZ/G2L SoC. The core driver shares the
clk and channel register access for the other child devices like
Counter, PWM and Clock event.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-3-biju.das.jz@bp.renesas.com
This driver cannot be built as a module, so don't suggest otherwise
in Kconfig help.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Implement a regulator driver with IRQ support for fault management.
Written against documentation [1] and [2] and tested on real hardware.
Every channel has it's own regulator supply nammed 'vss1-supply' and
'vss2-supply'. The regulator supply is used to determine the output
voltage, as the smart switch provides no output regulation.
The driver requires the 'shunt-resistor-micro-ohms' to be present in
the devicetree to properly calculate current related values.
You must specify compatible devictree layout:
regulator@3a {
reg = <0x3a>;
vss1-supply = <&p3v3>;
compatible = "maxim,max5978";
...
regulators {
sw0_ref: SW0 {
regulator-compatible = "SW0";
shunt-resistor-micro-ohms = <12000>;
...
}
}
}
1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
...
Changes in V12:
- Use simple_mfd_i2c driver and remove previous implementation.
- Remove newline
- Use _MFD_MAX597X_H in header file
- Successfull build need following patch from regulator:
https://lore.kernel.org/r/20230216075302.68935-1-Naresh.Solanki@9elements.comhttps://lore.kernel.org/r/20230210163225.1208035-1-Naresh.Solanki@9elements.com
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230307121246.127425-2-Naresh.Solanki@9elements.com
- Change MFD support status from Supported to Maintained
- New Drivers
- Add support for the Intel Platform Management Component Interface (PMCI)
- Remove Drivers
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
- New Device Support
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
- New Functionality
- Provide Reset support to Syscon
- Fix-ups
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved register_sys_off_handler() API
- Bug Fixes
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths
-----BEGIN PGP SIGNATURE-----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=f0fr
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Change MFD support status from Supported to Maintained
New Drivers:
- Add support for the Intel Platform Management Component Interface
(PMCI)
Removed Drivers:
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
New Device Support:
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
New Functionality:
- Provide Reset support to Syscon
Fix-ups:
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration
strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved
register_sys_off_handler() API
Bug Fixes:
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths"
* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
dt-bindings: mfd: Add NXP BBNSM
mfd: ntxec: Add version number for EC in Tolino Vision
dt-bindings: mfd: syscon: Add mt8365-syscfg
mfd: Remove toshiba tmio drivers
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
mfd: syscon: Allow reset control for syscon devices
dt-bindings: mfd/syscon: Add resets property
dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
mfd: axp20x: Switch to the sys-off handler API
mfd: core: Spelling s/compement/complement/
mfd: max8925: Remove the unused function irq_to_max8925()
mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
dt-bindings: mfd: syscon: Document GXP register compatible
mfd: twl4030-power: Drop empty platform remove function
mfd: twl: Fix TWL6032 phy vbus detection
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
MAINTAINERS: Move MFD from a Supported to Maintaied state
...
Four separate mfd drivers are in the "tmio" family, and all of
them were used in now-removed PXA machines (eseries, tosa, and
hx4700), so the mfd drivers and all its children can be removed
as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230105134622.254560-19-arnd@kernel.org
The cs5535-mfd driver uses CPU-specific data that is not available
for ARCH=um builds, so don't allow it to be built for UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
17 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
18 | (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
24 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
25 | (boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
The htc-pasic3 MFD device was only used in the PXA magician
machine that is now removed, so this can be recycled as well.
Cc: Lee Jones <lee@kernel.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ucb1400 MFD driver and its gpio and touchscreen child
drivers were only used on a few PXA machines that were unused
for a while and are now removed.
Removing these leaves the AC97 support as ALSA specific,
no other drivers are now connected through this interface.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Four separate mfd drivers are in the "tmio" family, and all of
them were used in now-removed PXA machines (eseries, tosa, and
hx4700), so the mfd drivers and all its children can be removed
as well.
Cc: Lee Jones <lee@kernel.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the mfd driver for the Platform Management Component Interface
(PMCI) based interface of Intel MAX10 BMC controller.
PMCI is a software-visible interface, connected to card BMC which
provided the basic functionality of read/write BMC register. The access
to the register is done indirectly via a hardware controller/bridge
that handles read/write/clear commands and acknowledgments for the
commands.
Previously, intel-m10-bmc provided sysfs under
/sys/bus/spi/devices/... which is generalized in this change because
not all MAX10 BMC appear under SPI anymore.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Co-developed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-11-ilpo.jarvinen@linux.intel.com
Split the common code from intel-m10-bmc driver into intel-m10-bmc-core
and move the SPI bus parts into an interface specific file.
intel-m10-bmc-core becomes the core MFD functions which can support
multiple bus interface like SPI bus.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> # hwmon
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-5-ilpo.jarvinen@linux.intel.com
The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.
Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.
Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All board support that was marked as 'unused' earlier can
now be removed, leaving the five machines that that still
had someone using them in 2022, or that are supported in
qemu.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
As a minor optimization, this also lets us drop of_match_ptr(), as we
now know what it will resolve to, we might as well save cpp some work.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221122154134.58a7a18b@endymion.delvare
The TPS65219 is a power management IC PMIC designed to supply a wide
range of SoCs in both portable and stationary applications. Any SoC can
control TPS65219 over a standard I2C interface.
It contains the following components:
- Regulators.
- Over Temperature warning and Shut down.
- GPIOs
- Multi Function Pins (MFP)
- power-button
This patch adds support for tps65219 PMIC. At this time only
the functionalities listed below are made available:
- Regulators probe and functionalities
- warm and cold reset support
- SW shutdown support
- Regulator warnings via IRQs
- Power-button via IRQ
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221104152311.1098603-5-jneanne@baylibre.com
The BD957x driver uses REGMAP_IRQ but does not 'select' to depend on
it. This can cause build failures. Select REGMAP_IRQ for BD957X.
Fixes: 0e9692607f ("mfd: bd9576: Add IRQ support")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/Y3SdCWkRr1L64SWK@dc75zzyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Linus expressed a desire to have intel_soc_pmic_crc.o (INTEL_SOC_PMIC,
for Crystal Cove) be built on an "allmodconfig" build, when
I2C_DESIGNWARE_PLATFORM=m, to enhance build test coverage.
The PMIC driver won't work in this case since it requires
I2C_DESIGNWARE_PLATFORM=y to operate properly, but adding
"|| COMPILE_TEST" does improve the build test coverage.
Link: https://lore.kernel.org/all/CAHk-=wg=hh8xkPjiySnjAyR66AG64eyZ1Y9gHw+MCs8uuSZReA@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221101055433.16891-1-rdunlap@infradead.org
The HTC Herald machine was removed, so this driver is no
longer used anywhere.
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019150410.3851944-17-arnd@kernel.org
The ASoC davinci voicecodec support is no longer used after
the removal of the dm3xx SoC platform, so the MFD driver is never
selected.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-11-arnd@kernel.org
The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org
Adds Multi-function devices driver for SMpro co-processor found on the
Mt.Jade hardware reference platform with Ampere's Altra processor family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220929094321.770125-9-quan@os.amperecomputing.com
Add a specific MFD_SY7636A config option.
As part of this change we can use MFD_SY7636A as a dependency for all
SY7636a components and also remove the name from MFD_SIMPLE_MFD_I2C as
it no longer needs to be selectable.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220525115554.430971-2-alistair@alistair23.me
This adds support for the MediaTek MT6370 SubPMIC. MediaTek MT6370 is a
SubPMIC consisting of a single cell battery charger with ADC monitoring,
RGB LEDs, dual channel flashlight, WLED backlight driver, display bias
voltage supply, one general purpose LDO, and the USB Type-C & PD controller
complies with the latest USB Type-C and PD standards.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220805070610.3516-8-peterwu.pub@gmail.com
