475 Commits

Author	SHA1	Message	Date
Petr Pavlu	af3274905b	ring-buffer: Fix a race between readers and resize checks ... commit c2274b908d upstream. The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab79270 ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. and then run the following commands on the target system: echo 1 > /sys/kernel/tracing/events/sched/sched_switch/enable while true; do echo 16 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1 echo 8 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1 done & while true; do for i in /sys/kernel/tracing/per_cpu/*; do timeout 0.1 cat $i/trace_pipe; sleep 0.2 done done To fix the problem, make sure ring_buffer_resize() doesn't invoke rb_check_pages() concurrently with a reader operating on the same ring_buffer_per_cpu by taking its cpu_buffer->reader_lock. Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-3-petr.pavlu@suse.com Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 659f451ff2 ("ring-buffer: Add integrity check at end of iter read") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> [ Fixed whitespace ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2024-06-12 11:11:19 +02:00
Steven Rostedt (Google)	a9cd92bc05	ring-buffer: Only update pages_touched when a new page is touched ... commit ffe3986fec upstream. The "buffer_percent" logic that is used by the ring buffer splice code to only wake up the tasks when there's no data after the buffer is filled to the percentage of the "buffer_percent" file is dependent on three variables that determine the amount of data that is in the ring buffer: 1) pages_read - incremented whenever a new sub-buffer is consumed 2) pages_lost - incremented every time a writer overwrites a sub-buffer 3) pages_touched - incremented when a write goes to a new sub-buffer The percentage is the calculation of: (pages_touched - (pages_lost + pages_read)) / nr_pages Basically, the amount of data is the total number of sub-bufs that have been touched, minus the number of sub-bufs lost and sub-bufs consumed. This is divided by the total count to give the buffer percentage. When the percentage is greater than the value in the "buffer_percent" file, it wakes up splice readers waiting for that amount. It was observed that over time, the amount read from the splice was constantly decreasing the longer the trace was running. That is, if one asked for 60%, it would read over 60% when it first starts tracing, but then it would be woken up at under 60% and would slowly decrease the amount of data read after being woken up, where the amount becomes much less than the buffer percent. This was due to an accounting of the pages_touched incrementation. This value is incremented whenever a writer transfers to a new sub-buffer. But the place where it was incremented was incorrect. If a writer overflowed the current sub-buffer it would go to the next one. If it gets preempted by an interrupt at that time, and the interrupt performs a trace, it too will end up going to the next sub-buffer. But only one should increment the counter. Unfortunately, that was not the case. Change the cmpxchg() that does the real switch of the tail-page into a try_cmpxchg(), and on success, perform the increment of pages_touched. This will only increment the counter once for when the writer moves to a new sub-buffer, and not when there's a race and is incremented for when a writer and its preempting writer both move to the same new sub-buffer. Link: https://lore.kernel.org/linux-trace-kernel/20240409151309.0d0e5056@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 2c2b0a78b3 ("ring-buffer: Add percentage of ring buffer full to wake up reader") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2024-04-17 11:19:25 +02:00
linke li	fb8579acac	ring-buffer: use READ_ONCE() to read cpu_buffer->commit_page in concurrent environment ... [ Upstream commit f1e30cb636 ] In function ring_buffer_iter_empty(), cpu_buffer->commit_page is read while other threads may change it. It may cause the time_stamp that read in the next line come from a different page. Use READ_ONCE() to avoid having to reason about compiler optimizations now and in future. Link: https://lore.kernel.org/linux-trace-kernel/tencent_DFF7D3561A0686B5E8FC079150A02505180A@qq.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: linke li <lilinke99@qq.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-04-13 13:07:38 +02:00
Steven Rostedt (Google)	b31301a1fa	ring-buffer: Use wait_event_interruptible() in ring_buffer_wait() ... [ Upstream commit 7af9ded0c2 ] Convert ring_buffer_wait() over to wait_event_interruptible(). The default condition is to execute the wait loop inside __wait_event() just once. This does not change the ring_buffer_wait() prototype yet, but restructures the code so that it can take a "cond" and "data" parameter and will call wait_event_interruptible() with a helper function as the condition. The helper function (rb_wait_cond) takes the cond function and data parameters. It will first check if the buffer hit the watermark defined by the "full" parameter and then call the passed in condition parameter. If either are true, it returns true. If rb_wait_cond() does not return true, it will set the appropriate "waiters_pending" flag and returns false. Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wgsNgewHFxZAJiAQznwPMqEtQmi1waeS2O1v6L4c_Um5A@mail.gmail.com/ Link: https://lore.kernel.org/linux-trace-kernel/20240312121703.399598519@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linke li <lilinke99@qq.com> Cc: Rabin Vincent <rabin@rab.in> Fixes: f3ddb74ad0 ("tracing: Wake up ring buffer waiters on closing of the file") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-04-03 15:28:32 +02:00
Steven Rostedt (Google)	7bcd58e809	ring-buffer: Fix full_waiters_pending in poll ... [ Upstream commit 8145f1c35f ] If a reader of the ring buffer is doing a poll, and waiting for the ring buffer to hit a specific watermark, there could be a case where it gets into an infinite ping-pong loop. The poll code has: rbwork->full_waiters_pending = true; if (!cpu_buffer->shortest_full || cpu_buffer->shortest_full > full) cpu_buffer->shortest_full = full; The writer will see full_waiters_pending and check if the ring buffer is filled over the percentage of the shortest_full value. If it is, it calls an irq_work to wake up all the waiters. But the code could get into a circular loop: CPU 0 CPU 1 ----- ----- [ Poll ] [ shortest_full = 0 ] rbwork->full_waiters_pending = true; if (rbwork->full_waiters_pending && [ buffer percent ] > shortest_full) { rbwork->wakeup_full = true; [ queue_irqwork ] cpu_buffer->shortest_full = full; [ IRQ work ] if (rbwork->wakeup_full) { cpu_buffer->shortest_full = 0; wakeup poll waiters; [woken] if ([ buffer percent ] > full) break; rbwork->full_waiters_pending = true; if (rbwork->full_waiters_pending && [ buffer percent ] > shortest_full) { rbwork->wakeup_full = true; [ queue_irqwork ] cpu_buffer->shortest_full = full; [ IRQ work ] if (rbwork->wakeup_full) { cpu_buffer->shortest_full = 0; wakeup poll waiters; [woken] [ Wash, rinse, repeat! ] In the poll, the shortest_full needs to be set before the full_pending_waiters, as once that is set, the writer will compare the current shortest_full (which is incorrect) to decide to call the irq_work, which will reset the shortest_full (expecting the readers to update it). Also move the setting of full_waiters_pending after the check if the ring buffer has the required percentage filled. There's no reason to tell the writer to wake up waiters if there are no waiters. Link: https://lore.kernel.org/linux-trace-kernel/20240312131952.630922155@goodmis.org Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark") Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-04-03 15:28:32 +02:00
Steven Rostedt (Google)	b87a7e108e	ring-buffer: Fix resetting of shortest_full ... [ Upstream commit 68282dd930 ] The "shortest_full" variable is used to keep track of the waiter that is waiting for the smallest amount on the ring buffer before being woken up. When a tasks waits on the ring buffer, it passes in a "full" value that is a percentage. 0 means wake up on any data. 1-100 means wake up from 1% to 100% full buffer. As all waiters are on the same wait queue, the wake up happens for the waiter with the smallest percentage. The problem is that the smallest_full on the cpu_buffer that stores the smallest amount doesn't get reset when all the waiters are woken up. It does get reset when the ring buffer is reset (echo > /sys/kernel/tracing/trace). This means that tasks may be woken up more often then when they want to be. Instead, have the shortest_full field get reset just before waking up all the tasks. If the tasks wait again, they will update the shortest_full before sleeping. Also add locking around setting of shortest_full in the poll logic, and change "work" to "rbwork" to match the variable name for rb_irq_work structures that are used in other places. Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.948914369@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linke li <lilinke99@qq.com> Cc: Rabin Vincent <rabin@rab.in> Fixes: 2c2b0a78b3 ("ring-buffer: Add percentage of ring buffer full to wake up reader") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Stable-dep-of: 8145f1c35f ("ring-buffer: Fix full_waiters_pending in poll") Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-04-03 15:28:32 +02:00
Steven Rostedt (Google)	73dae1a5d4	ring-buffer: Do not set shortest_full when full target is hit ... [ Upstream commit 761d9473e2 ] The rb_watermark_hit() checks if the amount of data in the ring buffer is above the percentage level passed in by the "full" variable. If it is, it returns true. But it also sets the "shortest_full" field of the cpu_buffer that informs writers that it needs to call the irq_work if the amount of data on the ring buffer is above the requested amount. The rb_watermark_hit() always sets the shortest_full even if the amount in the ring buffer is what it wants. As it is not going to wait, because it has what it wants, there's no reason to set shortest_full. Link: https://lore.kernel.org/linux-trace-kernel/20240312115641.6aa8ba08@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark") Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-04-03 15:28:31 +02:00
Steven Rostedt (Google)	b82dbe74ee	ring-buffer: Fix waking up ring buffer readers ... [ Upstream commit b359457368 ] A task can wait on a ring buffer for when it fills up to a specific watermark. The writer will check the minimum watermark that waiters are waiting for and if the ring buffer is past that, it will wake up all the waiters. The waiters are in a wait loop, and will first check if a signal is pending and then check if the ring buffer is at the desired level where it should break out of the loop. If a file that uses a ring buffer closes, and there's threads waiting on the ring buffer, it needs to wake up those threads. To do this, a "wait_index" was used. Before entering the wait loop, the waiter will read the wait_index. On wakeup, it will check if the wait_index is different than when it entered the loop, and will exit the loop if it is. The waker will only need to update the wait_index before waking up the waiters. This had a couple of bugs. One trivial one and one broken by design. The trivial bug was that the waiter checked the wait_index after the schedule() call. It had to be checked between the prepare_to_wait() and the schedule() which it was not. The main bug is that the first check to set the default wait_index will always be outside the prepare_to_wait() and the schedule(). That's because the ring_buffer_wait() doesn't have enough context to know if it should break out of the loop. The loop itself is not needed, because all the callers to the ring_buffer_wait() also has their own loop, as the callers have a better sense of what the context is to decide whether to break out of the loop or not. Just have the ring_buffer_wait() block once, and if it gets woken up, exit the function and let the callers decide what to do next. Link: https://lore.kernel.org/all/CAHk-=whs5MdtNjzFkTyaUy=vHi=qwWgPi0JgTe6OYUYMNSRZfg@mail.gmail.com/ Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.792933613@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linke li <lilinke99@qq.com> Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad2 ("tracing: Do not busy wait in buffer splice") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Stable-dep-of: 761d9473e2 ("ring-buffer: Do not set shortest_full when full target is hit") Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-04-03 15:28:31 +02:00
Vincent Donnefort	f5f6332f18	ring-buffer: Clean ring_buffer_poll_wait() error return ... commit 66bbea9ed6 upstream. The return type for ring_buffer_poll_wait() is __poll_t. This is behind the scenes an unsigned where we can set event bits. In case of a non-allocated CPU, we do return instead -EINVAL (0xffffffea). Lucky us, this ends up setting few error bits (EPOLLERR | EPOLLHUP | EPOLLNVAL), so user-space at least is aware something went wrong. Nonetheless, this is an incorrect code. Replace that -EINVAL with a proper EPOLLERR to clean that output. As this doesn't change the behaviour, there's no need to treat this change as a bug fix. Link: https://lore.kernel.org/linux-trace-kernel/20240131140955.3322792-1-vdonnefort@google.com Cc: stable@vger.kernel.org Fixes: 6721cb6002 ("ring-buffer: Do not poll non allocated cpu buffers") Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2024-02-23 09:25:08 +01:00
Steven Rostedt (Google)	33e42861eb	ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI ... [ Upstream commit 712292308a ] As the ring buffer recording requires cmpxchg() to work, if the architecture does not support cmpxchg in NMI, then do not do any recording within an NMI. Link: https://lore.kernel.org/linux-trace-kernel/20231213175403.6fc18540@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-01-20 11:51:43 +01:00
Steven Rostedt (Google)	ccd48707d5	tracing: Fix blocked reader of snapshot buffer ... commit 39a7dc23a1 upstream. If an application blocks on the snapshot or snapshot_raw files, expecting to be woken up when a snapshot occurs, it will not happen. Or it may happen with an unexpected result. That result is that the application will be reading the main buffer instead of the snapshot buffer. That is because when the snapshot occurs, the main and snapshot buffers are swapped. But the reader has a descriptor still pointing to the buffer that it originally connected to. This is fine for the main buffer readers, as they may be blocked waiting for a watermark to be hit, and when a snapshot occurs, the data that the main readers want is now on the snapshot buffer. But for waiters of the snapshot buffer, they are waiting for an event to occur that will trigger the snapshot and they can then consume it quickly to save the snapshot before the next snapshot occurs. But to do this, they need to read the new snapshot buffer, not the old one that is now receiving new data. Also, it does not make sense to have a watermark "buffer_percent" on the snapshot buffer, as the snapshot buffer is static and does not receive new data except all at once. Link: https://lore.kernel.org/linux-trace-kernel/20231228095149.77f5b45d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: debdd57f51 ("tracing: Make a snapshot feature available from userspace") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2024-01-05 15:19:44 +01:00
Steven Rostedt (Google)	baa8894403	ring-buffer: Fix wake ups when buffer_percent is set to 100 ... commit 623b1f896f upstream. The tracefs file "buffer_percent" is to allow user space to set a water-mark on how much of the tracing ring buffer needs to be filled in order to wake up a blocked reader. 0 - is to wait until any data is in the buffer 1 - is to wait for 1% of the sub buffers to be filled 50 - would be half of the sub buffers are filled with data 100 - is not to wake the waiter until the ring buffer is completely full Unfortunately the test for being full was: dirty = ring_buffer_nr_dirty_pages(buffer, cpu); return (dirty * 100) > (full * nr_pages); Where "full" is the value for "buffer_percent". There is two issues with the above when full == 100. 1. dirty * 100 > 100 * nr_pages will never be true That is, the above is basically saying that if the user sets buffer_percent to 100, more pages need to be dirty than exist in the ring buffer! 2. The page that the writer is on is never considered dirty, as dirty pages are only those that are full. When the writer goes to a new sub-buffer, it clears the contents of that sub-buffer. That is, even if the check was ">=" it would still not be equal as the most pages that can be considered "dirty" is nr_pages - 1. To fix this, add one to dirty and use ">=" in the compare. Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: 03329f9939 ("tracing: Add tracefs file buffer_percentage") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2024-01-05 15:19:44 +01:00
Steven Rostedt (Google)	bddd8b50bf	ring-buffer: Fix slowpath of interrupted event ... [ Upstream commit b803d7c664 ] To synchronize the timestamps with the ring buffer reservation, there are two timestamps that are saved in the buffer meta data. 1. before_stamp 2. write_stamp When the two are equal, the write_stamp is considered valid, as in, it may be used to calculate the delta of the next event as the write_stamp is the timestamp of the previous reserved event on the buffer. This is done by the following: /*A*/ w = current position on the ring buffer before = before_stamp after = write_stamp ts = read current timestamp if (before != after) { write_stamp is not valid, force adding an absolute timestamp. } /*B*/ before_stamp = ts /*C*/ write = local_add_return(event length, position on ring buffer) if (w == write - event length) { /* Nothing interrupted between A and C */ /*E*/ write_stamp = ts; delta = ts - after /* * If nothing interrupted again, * before_stamp == write_stamp and write_stamp * can be used to calculate the delta for * events that come in after this one. */ } else { /* * The slow path! * Was interrupted between A and C. */ This is the place that there's a bug. We currently have: after = write_stamp ts = read current timestamp /*F*/ if (write == current position on the ring buffer && after < ts && cmpxchg(write_stamp, after, ts)) { delta = ts - after; } else { delta = 0; } The assumption is that if the current position on the ring buffer hasn't moved between C and F, then it also was not interrupted, and that the last event written has a timestamp that matches the write_stamp. That is the write_stamp is valid. But this may not be the case: If a task context event was interrupted by softirq between B and C. And the softirq wrote an event that got interrupted by a hard irq between C and E. and the hard irq wrote an event (does not need to be interrupted) We have: /*B*/ before_stamp = ts of normal context ---> interrupted by softirq /*B*/ before_stamp = ts of softirq context ---> interrupted by hardirq /*B*/ before_stamp = ts of hard irq context /*E*/ write_stamp = ts of hard irq context /* matches and write_stamp valid */ <---- /*E*/ write_stamp = ts of softirq context /* No longer matches before_stamp, write_stamp is not valid! */ <--- w != write - length, go to slow path // Right now the order of events in the ring buffer is: // // |-- softirq event --|-- hard irq event --|-- normal context event --| // after = write_stamp (this is the ts of softirq) ts = read current timestamp if (write == current position on the ring buffer [true] && after < ts [true] && cmpxchg(write_stamp, after, ts) [true]) { delta = ts - after [Wrong!] The delta is to be between the hard irq event and the normal context event, but the above logic made the delta between the softirq event and the normal context event, where the hard irq event is between the two. This will shift all the remaining event timestamps on the sub-buffer incorrectly. The write_stamp is only valid if it matches the before_stamp. The cmpxchg does nothing to help this. Instead, the following logic can be done to fix this: before = before_stamp ts = read current timestamp before_stamp = ts after = write_stamp if (write == current position on the ring buffer && after == before && after < ts) { delta = ts - after } else { delta = 0; } The above will only use the write_stamp if it still matches before_stamp and was tested to not have changed since C. As a bonus, with this logic we do not need any 64-bit cmpxchg() at all! This means the 32-bit rb_time_t workaround can finally be removed. But that's for a later time. Link: https://lore.kernel.org/linux-trace-kernel/20231218175229.58ec3daf@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231218230712.3a76b081@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Fixes: dd93942570 ("ring-buffer: Do not try to put back write_stamp") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-01-01 12:42:44 +00:00
Steven Rostedt (Google)	307f56f260	ring-buffer: Remove useless update to write_stamp in rb_try_to_discard() ... [ Upstream commit 083e9f65bd ] When filtering is enabled, a temporary buffer is created to place the content of the trace event output so that the filter logic can decide from the trace event output if the trace event should be filtered out or not. If it is to be filtered out, the content in the temporary buffer is simply discarded, otherwise it is written into the trace buffer. But if an interrupt were to come in while a previous event was using that temporary buffer, the event written by the interrupt would actually go into the ring buffer itself to prevent corrupting the data on the temporary buffer. If the event is to be filtered out, the event in the ring buffer is discarded, or if it fails to discard because another event were to have already come in, it is turned into padding. The update to the write_stamp in the rb_try_to_discard() happens after a fix was made to force the next event after the discard to use an absolute timestamp by setting the before_stamp to zero so it does not match the write_stamp (which causes an event to use the absolute timestamp). But there's an effort in rb_try_to_discard() to put back the write_stamp to what it was before the event was added. But this is useless and wasteful because nothing is going to be using that write_stamp for calculations as it still will not match the before_stamp. Remove this useless update, and in doing so, we remove another cmpxchg64()! Also update the comments to reflect this change as well as remove some extra white space in another comment. Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Vincent Donnefort <vdonnefort@google.com> Fixes: b2dd797543 ("ring-buffer: Force absolute timestamp on discard of event") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-01-01 12:42:44 +00:00
Mathieu Desnoyers	82aaf7fc98	ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg() ... [ Upstream commit dec890089b ] The following race can cause rb_time_read() to observe a corrupted time stamp: rb_time_cmpxchg() [...] if (!rb_time_read_cmpxchg(&t->msb, msb, msb2)) return false; if (!rb_time_read_cmpxchg(&t->top, top, top2)) return false; <interrupted before updating bottom> __rb_time_read() [...] do { c = local_read(&t->cnt); top = local_read(&t->top); bottom = local_read(&t->bottom); msb = local_read(&t->msb); } while (c != local_read(&t->cnt)); *cnt = rb_time_cnt(top); /* If top and msb counts don't match, this interrupted a write */ if (*cnt != rb_time_cnt(msb)) return false; ^ this check fails to catch that "bottom" is still not updated. So the old "bottom" value is returned, which is wrong. Fix this by checking that all three of msb, top, and bottom 2-bit cnt values match. The reason to favor checking all three fields over requiring a specific update order for both rb_time_set() and rb_time_cmpxchg() is because checking all three fields is more robust to handle partial failures of rb_time_cmpxchg() when interrupted by nested rb_time_set(). Link: https://lore.kernel.org/lkml/20231211201324.652870-1-mathieu.desnoyers@efficios.com/ Link: https://lore.kernel.org/linux-trace-kernel/20231212193049.680122-1-mathieu.desnoyers@efficios.com Fixes: f458a14534 ("ring-buffer: Test last update in 32bit version of __rb_time_read()") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-01-01 12:42:43 +00:00
Steven Rostedt (Google)	3432f9686a	ring-buffer: Have rb_time_cmpxchg() set the msb counter too ... commit 0aa0e5289c upstream. The rb_time_cmpxchg() on 32-bit architectures requires setting three 32-bit words to represent the 64-bit timestamp, with some salt for synchronization. Those are: msb, top, and bottom The issue is, the rb_time_cmpxchg() did not properly salt the msb portion, and the msb that was written was stale. Link: https://lore.kernel.org/linux-trace-kernel/20231215084114.20899342@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: f03f2abce4 ("ring-buffer: Have 32 bit time stamps use all 64 bits") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-20 17:02:06 +01:00
Steven Rostedt (Google)	b3778a2fa4	ring-buffer: Do not try to put back write_stamp ... commit dd93942570 upstream. If an update to an event is interrupted by another event between the time the initial event allocated its buffer and where it wrote to the write_stamp, the code try to reset the write stamp back to the what it had just overwritten. It knows that it was overwritten via checking the before_stamp, and if it didn't match what it wrote to the before_stamp before it allocated its space, it knows it was overwritten. To put back the write_stamp, it uses the before_stamp it read. The problem here is that by writing the before_stamp to the write_stamp it makes the two equal again, which means that the write_stamp can be considered valid as the last timestamp written to the ring buffer. But this is not necessarily true. The event that interrupted the event could have been interrupted in a way that it was interrupted as well, and can end up leaving with an invalid write_stamp. But if this happens and returns to this context that uses the before_stamp to update the write_stamp again, it can possibly incorrectly make it valid, causing later events to have in correct time stamps. As it is OK to leave this function with an invalid write_stamp (one that doesn't match the before_stamp), there's no reason to try to make it valid again in this case. If this race happens, then just leave with the invalid write_stamp and the next event to come along will just add a absolute timestamp and validate everything again. Bonus points: This gets rid of another cmpxchg64! Link: https://lore.kernel.org/linux-trace-kernel/20231214222921.193037a7@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Vincent Donnefort <vdonnefort@google.com> Fixes: a389d86f7f ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-20 17:02:06 +01:00
Steven Rostedt (Google)	bc17bc9643	ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs ... commit fff88fa0fb upstream. Mathieu Desnoyers pointed out an issue in the rb_time_cmpxchg() for 32 bit architectures. That is: static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set) { unsigned long cnt, top, bottom, msb; unsigned long cnt2, top2, bottom2, msb2; u64 val; /* The cmpxchg always fails if it interrupted an update */ if (!__rb_time_read(t, &val, &cnt2)) return false; if (val != expect) return false; <<<< interrupted here! cnt = local_read(&t->cnt); The problem is that the synchronization counter in the rb_time_t is read *after* the value of the timestamp is read. That means if an interrupt were to come in between the value being read and the counter being read, it can change the value and the counter and the interrupted process would be clueless about it! The counter needs to be read first and then the value. That way it is easy to tell if the value is stale or not. If the counter hasn't been updated, then the value is still good. Link: https://lore.kernel.org/linux-trace-kernel/20231211201324.652870-1-mathieu.desnoyers@efficios.com/ Link: https://lore.kernel.org/linux-trace-kernel/20231212115301.7a9c9a64@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 10464b4aa6 ("ring-buffer: Add rb_time_t 64 bit operations for speeding up 32 bit") Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-20 17:02:06 +01:00
Steven Rostedt (Google)	ae76d9bdf1	ring-buffer: Fix writing to the buffer with max_data_size ... commit b3ae7b67b8 upstream. The maximum ring buffer data size is the maximum size of data that can be recorded on the ring buffer. Events must be smaller than the sub buffer data size minus any meta data. This size is checked before trying to allocate from the ring buffer because the allocation assumes that the size will fit on the sub buffer. The maximum size was calculated as the size of a sub buffer page (which is currently PAGE_SIZE minus the sub buffer header) minus the size of the meta data of an individual event. But it missed the possible adding of a time stamp for events that are added long enough apart that the event meta data can't hold the time delta. When an event is added that is greater than the current BUF_MAX_DATA_SIZE minus the size of a time stamp, but still less than or equal to BUF_MAX_DATA_SIZE, the ring buffer would go into an infinite loop, looking for a page that can hold the event. Luckily, there's a check for this loop and after 1000 iterations and a warning is emitted and the ring buffer is disabled. But this should never happen. This can happen when a large event is added first, or after a long period where an absolute timestamp is prefixed to the event, increasing its size by 8 bytes. This passes the check and then goes into the algorithm that causes the infinite loop. For events that are the first event on the sub-buffer, it does not need to add a timestamp, because the sub-buffer itself contains an absolute timestamp, and adding one is redundant. The fix is to check if the event is to be the first event on the sub-buffer, and if it is, then do not add a timestamp. This also fixes 32 bit adding a timestamp when a read of before_stamp or write_stamp is interrupted. There's still no need to add that timestamp if the event is going to be the first event on the sub buffer. Also, if the buffer has "time_stamp_abs" set, then also check if the length plus the timestamp is greater than the BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/all/20231212104549.58863438@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231212071837.5fdd6c13@gandalf.local.home Link: https://lore.kernel.org/linux-trace-kernel/20231212111617.39e02849@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: a4543a2fa9 ("ring-buffer: Get timestamp after event is allocated") Fixes: 58fbc3c632 ("ring-buffer: Consolidate add_timestamp to remove some branches") Reported-by: Kent Overstreet <kent.overstreet@linux.dev> # (on IRC) Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-20 17:02:06 +01:00
Steven Rostedt (Google)	307ed139d7	ring-buffer: Have saved event hold the entire event ... commit b049525855 upstream. For the ring buffer iterator (non-consuming read), the event needs to be copied into the iterator buffer to make sure that a writer does not overwrite it while the user is reading it. If a write happens during the copy, the buffer is simply discarded. But the temp buffer itself was not big enough. The allocation of the buffer was only BUF_MAX_DATA_SIZE, which is the maximum data size that can be passed into the ring buffer and saved. But the temp buffer needs to hold the meta data as well. That would be BUF_PAGE_SIZE and not BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/linux-trace-kernel/20231212072558.61f76493@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 785888c544 ("ring-buffer: Have rb_iter_head_event() handle concurrent writer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-20 17:02:06 +01:00
Steven Rostedt (Google)	5e58483677	ring-buffer: Do not update before stamp when switching sub-buffers ... commit 9e45e39dc2 upstream. The ring buffer timestamps are synchronized by two timestamp placeholders. One is the "before_stamp" and the other is the "write_stamp" (sometimes referred to as the "after stamp" but only in the comments. These two stamps are key to knowing how to handle nested events coming in with a lockless system. When moving across sub-buffers, the before stamp is updated but the write stamp is not. There's an effort to put back the before stamp to something that seems logical in case there's nested events. But as the current event is about to cross sub-buffers, and so will any new nested event that happens, updating the before stamp is useless, and could even introduce new race conditions. The first event on a sub-buffer simply uses the sub-buffer's timestamp and keeps a "delta" of zero. The "before_stamp" and "write_stamp" are not used in the algorithm in this case. There's no reason to try to fix the before_stamp when this happens. As a bonus, it removes a cmpxchg() when crossing sub-buffers! Link: https://lore.kernel.org/linux-trace-kernel/20231211114420.36dde01b@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: a389d86f7f ("ring-buffer: Have nested events still record running time stamp") Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-20 17:02:05 +01:00
Steven Rostedt (Google)	b02bf0d952	ring-buffer: Fix memory leak of free page ... commit 17d8017581 upstream. Reading the ring buffer does a swap of a sub-buffer within the ring buffer with a empty sub-buffer. This allows the reader to have full access to the content of the sub-buffer that was swapped out without having to worry about contention with the writer. The readers call ring_buffer_alloc_read_page() to allocate a page that will be used to swap with the ring buffer. When the code is finished with the reader page, it calls ring_buffer_free_read_page(). Instead of freeing the page, it stores it as a spare. Then next call to ring_buffer_alloc_read_page() will return this spare instead of calling into the memory management system to allocate a new page. Unfortunately, on freeing of the ring buffer, this spare page is not freed, and causes a memory leak. Link: https://lore.kernel.org/linux-trace-kernel/20231210221250.7b9cc83c@rorschach.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 73a757e631 ("ring-buffer: Return reader page back into existing ring buffer") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-20 17:02:05 +01:00
Steven Rostedt (Google)	56a334310f	ring-buffer: Force absolute timestamp on discard of event ... commit b2dd797543 upstream. There's a race where if an event is discarded from the ring buffer and an interrupt were to happen at that time and insert an event, the time stamp is still used from the discarded event as an offset. This can screw up the timings. If the event is going to be discarded, set the "before_stamp" to zero. When a new event comes in, it compares the "before_stamp" with the "write_stamp" and if they are not equal, it will insert an absolute timestamp. This will prevent the timings from getting out of sync due to the discarded event. Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 6f6be606e7 ("ring-buffer: Force before_stamp and write_stamp to be different on discard") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-13 18:45:21 +01:00
Steven Rostedt (Google)	d251b98183	ring-buffer: Test last update in 32bit version of __rb_time_read() ... commit f458a14534 upstream. Since 64 bit cmpxchg() is very expensive on 32bit architectures, the timestamp used by the ring buffer does some interesting tricks to be able to still have an atomic 64 bit number. It originally just used 60 bits and broke it up into two 32 bit words where the extra 2 bits were used for synchronization. But this was not enough for all use cases, and all 64 bits were required. The 32bit version of the ring buffer timestamp was then broken up into 3 32bit words using the same counter trick. But one update was not done. The check to see if the read operation was done without interruption only checked the first two words and not last one (like it had before this update). Fix it by making sure all three updates happen without interruption by comparing the initial counter with the last updated counter. Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: f03f2abce4 ("ring-buffer: Have 32 bit time stamps use all 64 bits") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2023-12-13 18:45:21 +01:00
Steven Rostedt (Google)	1e0cb399c7	ring-buffer: Update "shortest_full" in polling ... It was discovered that the ring buffer polling was incorrectly stating that read would not block, but that's because polling did not take into account that reads will block if the "buffer-percent" was set. Instead, the ring buffer polling would say reads would not block if there was any data in the ring buffer. This was incorrect behavior from a user space point of view. This was fixed by commit 42fb0a1e84 by having the polling code check if the ring buffer had more data than what the user specified "buffer percent" had. The problem now is that the polling code did not register itself to the writer that it wanted to wait for a specific "full" value of the ring buffer. The result was that the writer would wake the polling waiter whenever there was a new event. The polling waiter would then wake up, see that there's not enough data in the ring buffer to notify user space and then go back to sleep. The next event would wake it up again. Before the polling fix was added, the code would wake up around 100 times for a hackbench 30 benchmark. After the "fix", due to the constant waking of the writer, it would wake up over 11,0000 times! It would never leave the kernel, so the user space behavior was still "correct", but this definitely is not the desired effect. To fix this, have the polling code add what it's waiting for to the "shortest_full" variable, to tell the writer not to wake it up if the buffer is not as full as it expects to be. Note, after this fix, it appears that the waiter is now woken up around 2x the times it was before (~200). This is a tremendous improvement from the 11,000 times, but I will need to spend some time to see why polling is more aggressive in its wakeups than the read blocking code. Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-09-30 16:17:34 -04:00
Zheng Yejian	45d99ea451	ring-buffer: Fix bytes info in per_cpu buffer stats ... The 'bytes' info in file 'per_cpu/cpu<X>/stats' means the number of bytes in cpu buffer that have not been consumed. However, currently after consuming data by reading file 'trace_pipe', the 'bytes' info was not changed as expected. # cat per_cpu/cpu0/stats entries: 0 overrun: 0 commit overrun: 0 bytes: 568 <--- 'bytes' is problematical !!! oldest event ts: 8651.371479 now ts: 8653.912224 dropped events: 0 read events: 8 The root cause is incorrect stat on cpu_buffer->read_bytes. To fix it: 1. When stat 'read_bytes', account consumed event in rb_advance_reader(); 2. When stat 'entries_bytes', exclude the discarded padding event which is smaller than minimum size because it is invisible to reader. Then use rb_page_commit() instead of BUF_PAGE_SIZE at where accounting for page-based read/remove/overrun. Also correct the comments of ring_buffer_bytes_cpu() in this patch. Link: https://lore.kernel.org/linux-trace-kernel/20230921125425.1708423-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: c64e148a3b ("trace: Add ring buffer stats to measure rate of events") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-09-22 16:57:14 -04:00
Steven Rostedt (Google)	95a404bd60	ring-buffer: Do not attempt to read past "commit" ... When iterating over the ring buffer while the ring buffer is active, the writer can corrupt the reader. There's barriers to help detect this and handle it, but that code missed the case where the last event was at the very end of the page and has only 4 bytes left. The checks to detect the corruption by the writer to reads needs to see the length of the event. If the length in the first 4 bytes is zero then the length is stored in the second 4 bytes. But if the writer is in the process of updating that code, there's a small window where the length in the first 4 bytes could be zero even though the length is only 4 bytes. That will cause rb_event_length() to read the next 4 bytes which could happen to be off the allocated page. To protect against this, fail immediately if the next event pointer is less than 8 bytes from the end of the commit (last byte of data), as all events must be a minimum of 8 bytes anyway. Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/ Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-09-08 23:12:19 -04:00
Zheng Yejian	f6bd2c9248	ring-buffer: Avoid softlockup in ring_buffer_resize() ... When user resize all trace ring buffer through file 'buffer_size_kb', then in ring_buffer_resize(), kernel allocates buffer pages for each cpu in a loop. If the kernel preemption model is PREEMPT_NONE and there are many cpus and there are many buffer pages to be allocated, it may not give up cpu for a long time and finally cause a softlockup. To avoid it, call cond_resched() after each cpu buffer allocation. Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com Cc: <mhiramat@kernel.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-09-07 16:38:54 -04:00
Uros Bizjak	00a8478f8f	ring_buffer: Use try_cmpxchg instead of cmpxchg ... Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in ring_buffer.c. x86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). No functional change intended. Link: https://lore.kernel.org/linux-trace-kernel/20230714154418.8884-1-ubizjak@gmail.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-07-30 18:11:45 -04:00
Gaosheng Cui	151e34d1c6	ring-buffer: Fix kernel-doc warnings in ring_buffer.c ... Fix kernel-doc warnings: kernel/trace/ring_buffer.c:954: warning: Function parameter or member 'cpu' not described in 'ring_buffer_wake_waiters' kernel/trace/ring_buffer.c:3383: warning: Excess function parameter 'event' description in 'ring_buffer_unlock_commit' kernel/trace/ring_buffer.c:5359: warning: Excess function parameter 'cpu' description in 'ring_buffer_reset_online_cpus' Link: https://lkml.kernel.org/r/20230724140827.1023266-2-cuigaosheng1@huawei.com Cc: <mhiramat@kernel.org> Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-07-28 19:59:03 -04:00
Zheng Yejian	2d093282b0	ring-buffer: Fix wrong stat of cpu_buffer->read ... When pages are removed in rb_remove_pages(), 'cpu_buffer->read' is set to 0 in order to make sure any read iterators reset themselves. However, this will mess 'entries' stating, see following steps: # cd /sys/kernel/tracing/ # 1. Enlarge ring buffer prepare for later reducing: # echo 20 > per_cpu/cpu0/buffer_size_kb # 2. Write a log into ring buffer of cpu0: # taskset -c 0 echo "hello1" > trace_marker # 3. Read the log: # cat per_cpu/cpu0/trace_pipe <...>-332 [000] ..... 62.406844: tracing_mark_write: hello1 # 4. Stop reading and see the stats, now 0 entries, and 1 event readed: # cat per_cpu/cpu0/stats entries: 0 [...] read events: 1 # 5. Reduce the ring buffer # echo 7 > per_cpu/cpu0/buffer_size_kb # 6. Now entries became unexpected 1 because actually no entries!!! # cat per_cpu/cpu0/stats entries: 1 [...] read events: 0 To fix it, introduce 'page_removed' field to count total removed pages since last reset, then use it to let read iterators reset themselves instead of changing the 'read' pointer. Link: https://lore.kernel.org/linux-trace-kernel/20230724054040.3489499-1-zhengyejian1@huawei.com Cc: <mhiramat@kernel.org> Cc: <vnagarnaik@google.com> Fixes: 83f40318dab0 ("ring-buffer: Make removal of ring buffer pages atomic") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-07-28 19:16:23 -04:00
Chen Lin	8a96c0288d	ring-buffer: Do not swap cpu_buffer during resize process ... When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418 [ 233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003 [ 233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58 [ 233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001 [ 233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000 [ 233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c [ 233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0 [ 233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000 [ 233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000 [ 233.734418] Call trace: [ 233.734593] rb_update_pages+0x1a8/0x3f8 [ 233.734853] update_pages_handler+0x1c/0x38 [ 233.735148] process_one_work+0x1f0/0x468 [ 233.735525] worker_thread+0x54/0x410 [ 233.735852] kthread+0x124/0x138 [ 233.736064] ret_from_fork+0x10/0x20 [ 233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060) [ 233.736959] ---[ end trace 0000000000000000 ]--- After analysis, the seq of the error is as follows [1-5]: int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size, int cpu_id) { for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //1. get cpu_buffer, aka cpu_buffer(A) ... ... schedule_work_on(cpu, &cpu_buffer->update_pages_work); //2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to // update_pages_handler, do the update process, set 'update_done' in // complete(&cpu_buffer->update_done) and to wakeup resize process. //----> //3. Just at this moment, ring_buffer_swap_cpu is triggered, //cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer. //ring_buffer_swap_cpu is called as the 'Call trace' below. Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x18/0x28 dump_stack+0x12c/0x188 ring_buffer_swap_cpu+0x2f8/0x328 update_max_tr_single+0x180/0x210 check_critical_timing+0x2b4/0x2c8 tracer_hardirqs_on+0x1c0/0x200 trace_hardirqs_on+0xec/0x378 el0_svc_common+0x64/0x260 do_el0_svc+0x90/0xf8 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x180/0x1c0 //<---- /* wait for all the updates to complete */ for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //4. get cpu_buffer, cpu_buffer(B) is used in the following process, //the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong. //for example, cpu_buffer(A)->update_done will leave be set 1, and will //not 'wait_for_completion' at the next resize round. if (!cpu_buffer->nr_pages_to_update) continue; if (cpu_online(cpu)) wait_for_completion(&cpu_buffer->update_done); cpu_buffer->nr_pages_to_update = 0; } ... } //5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong, //Continuing to run in the wrong state, then oops occurs. Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cn Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-07-23 11:09:25 -04:00
Zheng Yejian	7e42907f3a	ring-buffer: Fix deadloop issue on reading trace_pipe ... Soft lockup occurs when reading file 'trace_pipe': watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488] [...] RIP: 0010:ring_buffer_empty_cpu+0xed/0x170 RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218 RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901 R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000 [...] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __find_next_entry+0x1a8/0x4b0 ? peek_next_entry+0x250/0x250 ? down_write+0xa5/0x120 ? down_write_killable+0x130/0x130 trace_find_next_entry_inc+0x3b/0x1d0 tracing_read_pipe+0x423/0xae0 ? tracing_splice_read_pipe+0xcb0/0xcb0 vfs_read+0x16b/0x490 ksys_read+0x105/0x210 ? __ia32_sys_pwrite64+0x200/0x200 ? switch_fpu_return+0x108/0x220 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Through the vmcore, I found it's because in tracing_read_pipe(), ring_buffer_empty_cpu() found some buffer is not empty but then it cannot read anything due to "rb_num_of_entries() == 0" always true, Then it infinitely loop the procedure due to user buffer not been filled, see following code path: tracing_read_pipe() { ... ... waitagain: tracing_wait_pipe() // 1. find non-empty buffer here trace_find_next_entry_inc() // 2. loop here try to find an entry __find_next_entry() ring_buffer_empty_cpu(); // 3. find non-empty buffer peek_next_entry() // 4. but peek always return NULL ring_buffer_peek() rb_buffer_peek() rb_get_reader_page() // 5. because rb_num_of_entries() == 0 always true here // then return NULL // 6. user buffer not been filled so goto 'waitgain' // and eventually leads to an deadloop in kernel!!! } By some analyzing, I found that when resetting ringbuffer, the 'entries' of its pages are not all cleared (see rb_reset_cpu()). Then when reducing the ringbuffer, and if some reduced pages exist dirty 'entries' data, they will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which cause wrong 'overrun' count and eventually cause the deadloop issue. To fix it, we need to clear every pages in rb_reset_cpu(). Link: https://lore.kernel.org/linux-trace-kernel/20230708225144.3785600-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: a5fb833172eca ("ring-buffer: Fix uninitialized read_stamp") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-07-12 12:15:26 -04:00
Linus Torvalds	d579c468d7	tracing updates for 6.4: ... - User events are finally ready! After lots of collaboration between various parties, we finally locked down on a stable interface for user events that can also work with user space only tracing. This is implemented by telling the kernel (or user space library, but that part is user space only and not part of this patch set), where the variable is that the application uses to know if something is listening to the trace. There's also an interface to tell the kernel about these events, which will show up in the /sys/kernel/tracing/events/user_events/ directory, where it can be enabled. When it's enabled, the kernel will update the variable, to tell the application to start writing to the kernel. See https://lwn.net/Articles/927595/ - Cleaned up the direct trampolines code to simplify arm64 addition of direct trampolines. Direct trampolines use the ftrace interface but instead of jumping to the ftrace trampoline, applications (mostly BPF) can register their own trampoline for performance reasons. - Some updates to the fprobe infrastructure. fprobes are more efficient than kprobes, as it does not need to save all the registers that kprobes on ftrace do. More work needs to be done before the fprobes will be exposed as dynamic events. - More updates to references to the obsolete path of /sys/kernel/debug/tracing for the new /sys/kernel/tracing path. - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line by line instead of all at once. There's users in production kernels that have a large data dump that originally used printk() directly, but the data dump was larger than what printk() allowed as a single print. Using seq_buf() to do the printing fixes that. - Add /sys/kernel/tracing/touched_functions that shows all functions that was every traced by ftrace or a direct trampoline. This is used for debugging issues where a traced function could have caused a crash by a bpf program or live patching. - Add a "fields" option that is similar to "raw" but outputs the fields of the events. It's easier to read by humans. - Some minor fixes and clean ups. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZEr36xQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6quZHAQCzuqnn2S8DsPd3Sy1vKIYaj0uajW5D Kz1oUJH4F0H7kgEA8XwXkdtfKpOXWc/ZH4LWfL7Orx2wJZJQMV9dVqEPDAE= =w0Z1 -----END PGP SIGNATURE----- Merge tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - User events are finally ready! After lots of collaboration between various parties, we finally locked down on a stable interface for user events that can also work with user space only tracing. This is implemented by telling the kernel (or user space library, but that part is user space only and not part of this patch set), where the variable is that the application uses to know if something is listening to the trace. There's also an interface to tell the kernel about these events, which will show up in the /sys/kernel/tracing/events/user_events/ directory, where it can be enabled. When it's enabled, the kernel will update the variable, to tell the application to start writing to the kernel. See https://lwn.net/Articles/927595/ - Cleaned up the direct trampolines code to simplify arm64 addition of direct trampolines. Direct trampolines use the ftrace interface but instead of jumping to the ftrace trampoline, applications (mostly BPF) can register their own trampoline for performance reasons. - Some updates to the fprobe infrastructure. fprobes are more efficient than kprobes, as it does not need to save all the registers that kprobes on ftrace do. More work needs to be done before the fprobes will be exposed as dynamic events. - More updates to references to the obsolete path of /sys/kernel/debug/tracing for the new /sys/kernel/tracing path. - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line by line instead of all at once. There are users in production kernels that have a large data dump that originally used printk() directly, but the data dump was larger than what printk() allowed as a single print. Using seq_buf() to do the printing fixes that. - Add /sys/kernel/tracing/touched_functions that shows all functions that was every traced by ftrace or a direct trampoline. This is used for debugging issues where a traced function could have caused a crash by a bpf program or live patching. - Add a "fields" option that is similar to "raw" but outputs the fields of the events. It's easier to read by humans. - Some minor fixes and clean ups. * tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits) ring-buffer: Sync IRQ works before buffer destruction tracing: Add missing spaces in trace_print_hex_seq() ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus recordmcount: Fix memory leaks in the uwrite function tracing/user_events: Limit max fault-in attempts tracing/user_events: Prevent same address and bit per process tracing/user_events: Ensure bit is cleared on unregister tracing/user_events: Ensure write index cannot be negative seq_buf: Add seq_buf_do_printk() helper tracing: Fix print_fields() for __dyn_loc/__rel_loc tracing/user_events: Set event filter_type from type ring-buffer: Clearly check null ptr returned by rb_set_head_page() tracing: Unbreak user events tracing/user_events: Use print_format_fields() for trace output tracing/user_events: Align structs with tabs for readability tracing/user_events: Limit global user_event count tracing/user_events: Charge event allocs to cgroups tracing/user_events: Update documentation for ABI tracing/user_events: Use write ABI in example tracing/user_events: Add ABI self-test ...	2023-04-28 15:57:53 -07:00
Johannes Berg	675751bb20	ring-buffer: Sync IRQ works before buffer destruction ... If something was written to the buffer just before destruction, it may be possible (maybe not in a real system, but it did happen in ARCH=um with time-travel) to destroy the ringbuffer before the IRQ work ran, leading this KASAN report (or a crash without KASAN): BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a Read of size 8 at addr 000000006d640a48 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Tainted: G W O 6.3.0-rc1 #7 Stack: 60c4f20f 0c203d48 41b58ab3 60f224fc 600477fa 60f35687 60c4f20f 601273dd 00000008 6101eb00 6101eab0 615be548 Call Trace: [<60047a58>] show_stack+0x25e/0x282 [<60c609e0>] dump_stack_lvl+0x96/0xfd [<60c50d4c>] print_report+0x1a7/0x5a8 [<603078d3>] kasan_report+0xc1/0xe9 [<60308950>] __asan_report_load8_noabort+0x1b/0x1d [<60232844>] irq_work_run_list+0x11a/0x13a [<602328b4>] irq_work_tick+0x24/0x34 [<6017f9dc>] update_process_times+0x162/0x196 [<6019f335>] tick_sched_handle+0x1a4/0x1c3 [<6019fd9e>] tick_sched_timer+0x79/0x10c [<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695 [<60182913>] hrtimer_interrupt+0x16c/0x2c4 [<600486a3>] um_timer+0x164/0x183 [...] Allocated by task 411: save_stack_trace+0x99/0xb5 stack_trace_save+0x81/0x9b kasan_save_stack+0x2d/0x54 kasan_set_track+0x34/0x3e kasan_save_alloc_info+0x25/0x28 ____kasan_kmalloc+0x8b/0x97 __kasan_kmalloc+0x10/0x12 __kmalloc+0xb2/0xe8 load_elf_phdrs+0xee/0x182 [...] The buggy address belongs to the object at 000000006d640800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 584 bytes inside of freed 1024-byte region [000000006d640800, 000000006d640c00) Add the appropriate irq_work_sync() so the work finishes before the buffers are destroyed. Prior to the commit in the Fixes tag below, there was only a single global IRQ work, so this issue didn't exist. Link: https://lore.kernel.org/linux-trace-kernel/20230427175920.a76159263122.I8295e405c44362a86c995e9c2c37e3e03810aa56@changeid Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 15693458c4 ("tracing/ring-buffer: Move poll wake ups into ring buffer code") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-04-27 18:01:58 -04:00
Tze-nan Wu	7c339fb4d8	ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus ... In ring_buffer_reset_online_cpus, the buffer_size_kb write operation may permanently fail if the cpu_online_mask changes between two for_each_online_buffer_cpu loops. The number of increases and decreases on both cpu_buffer->resize_disabled and cpu_buffer->record_disabled may be inconsistent, causing some CPUs to have non-zero values for these atomic variables after the function returns. This issue can be reproduced by "echo 0 > trace" while hotplugging cpu. After reproducing success, we can find out buffer_size_kb will not be functional anymore. To prevent leaving 'resize_disabled' and 'record_disabled' non-zero after ring_buffer_reset_online_cpus returns, we ensure that each atomic variable has been set up before atomic_sub() to it. Link: https://lore.kernel.org/linux-trace-kernel/20230426062027.17451-1-Tze-nan.Wu@mediatek.com Cc: stable@vger.kernel.org Cc: <mhiramat@kernel.org> Cc: npiggin@gmail.com Fixes: b23d7a5f4a ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU") Reviewed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com> Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-04-26 09:08:53 -04:00
Zheng Yejian	625ed52717	ring-buffer: Clearly check null ptr returned by rb_set_head_page() ... In error case, 'buffer_page' returned by rb_set_head_page() is NULL, currently check '&buffer_page->list' is equivalent to check 'buffer_page' due to 'list' is the first member of 'buffer_page', but suppose it is not some time, 'head_page' would be wild memory while check would be bypassed. Link: https://lore.kernel.org/linux-trace-kernel/20230414071729.57312-1-zhengyejian1@huawei.com Cc: <mhiramat@kernel.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-04-25 20:11:26 -04:00
Zheng Yejian	6455b6163d	ring-buffer: Fix race while reader and writer are on the same page ... When user reads file 'trace_pipe', kernel keeps printing following logs that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in rb_get_reader_page(). It just looks like there's an infinite loop in tracing_read_pipe(). This problem occurs several times on arm64 platform when testing v5.10 and below. Call trace: rb_get_reader_page+0x248/0x1300 rb_buffer_peek+0x34/0x160 ring_buffer_peek+0xbc/0x224 peek_next_entry+0x98/0xbc __find_next_entry+0xc4/0x1c0 trace_find_next_entry_inc+0x30/0x94 tracing_read_pipe+0x198/0x304 vfs_read+0xb4/0x1e0 ksys_read+0x74/0x100 __arm64_sys_read+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Then I dump the vmcore and look into the problematic per_cpu ring_buffer, I found that tail_page/commit_page/reader_page are on the same page while reader_page->read is obviously abnormal: tail_page == commit_page == reader_page == { .write = 0x100d20, .read = 0x8f9f4805, // Far greater than 0xd20, obviously abnormal!!! .entries = 0x10004c, .real_end = 0x0, .page = { .time_stamp = 0x857257416af0, .commit = 0xd20, // This page hasn't been full filled. // .data[0...0xd20] seems normal. } } The root cause is most likely the race that reader and writer are on the same page while reader saw an event that not fully committed by writer. To fix this, add memory barriers to make sure the reader can see the content of what is committed. Since commit a0fcaaed0c ("ring-buffer: Fix race between reset page and reading page") has added the read barrier in rb_get_reader_page(), here we just need to add the write barrier. Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: 77ae365eca ("ring-buffer: make lockless") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-04-03 11:51:38 -04:00
Uros Bizjak	8328e36da9	ring_buffer: Use try_cmpxchg instead of cmpxchg ... Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old. x86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg fails. There is no need to re-read the value in the loop. No functional change intended. Link: https://lkml.kernel.org/r/20230305155532.5549-4-ubizjak@gmail.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-03-21 13:59:48 -04:00
Uros Bizjak	bc92b9562a	ring_buffer: Change some static functions to bool ... The return values of some functions are of boolean type. Change the type of these function to bool and adjust their return values. Also change type of some internal varibles to bool. No functional change intended. Link: https://lkml.kernel.org/r/20230305155532.5549-3-ubizjak@gmail.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-03-21 13:59:42 -04:00
Uros Bizjak	b4b55dfd96	ring_buffer: Change some static functions to void ... The results of some static functions are not used. Change the type of these function to void and remove unnecessary returns. No functional change intended. Link: https://lkml.kernel.org/r/20230305155532.5549-2-ubizjak@gmail.com Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-03-21 13:59:31 -04:00
Linus Torvalds	eaba52d63b	Tracing fixes for 6.3: ... - Fix setting affinity of hwlat threads in containers Using sched_set_affinity() has unwanted side effects when being called within a container. Use set_cpus_allowed_ptr() instead. - Fix per cpu thread management of the hwlat tracer * Do not start per_cpu threads if one is already running for the CPU. * When starting per_cpu threads, do not clear the kthread variable as it may already be set to running per cpu threads - Fix return value for test_gen_kprobe_cmd() On error the return value was overwritten by being set to the result of the call from kprobe_event_delete(), which would likely succeed, and thus have the function return success. - Fix splice() reads from the trace file that was broken by 36e2c7421f ("fs: don't allow splice read/write without explicit ops") - Remove obsolete and confusing comment in ring_buffer.c The original design of the ring buffer used struct page flags for tricks to optimize, which was shortly removed due to them being tricks. But a comment for those tricks remained. - Set local functions and variables to static -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBdIkBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qti2AP49s1GM8teFgDF/CO3oa45BoYq1lMJO 1Z+x+mS/bdUAZgEAw+3KGo8oZDuvWu/nr04JPeoy0GL1/JnbQ6JNCCjzhQc= =Yk66 -----END PGP SIGNATURE----- Merge tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix setting affinity of hwlat threads in containers Using sched_set_affinity() has unwanted side effects when being called within a container. Use set_cpus_allowed_ptr() instead - Fix per cpu thread management of the hwlat tracer: - Do not start per_cpu threads if one is already running for the CPU - When starting per_cpu threads, do not clear the kthread variable as it may already be set to running per cpu threads - Fix return value for test_gen_kprobe_cmd() On error the return value was overwritten by being set to the result of the call from kprobe_event_delete(), which would likely succeed, and thus have the function return success - Fix splice() reads from the trace file that was broken by commit 36e2c7421f ("fs: don't allow splice read/write without explicit ops") - Remove obsolete and confusing comment in ring_buffer.c The original design of the ring buffer used struct page flags for tricks to optimize, which was shortly removed due to them being tricks. But a comment for those tricks remained - Set local functions and variables to static * tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr ring-buffer: remove obsolete comment for free_buffer_page() tracing: Make splice_read available again ftrace: Set direct_ops storage-class-specifier to static trace/hwlat: Do not start per-cpu thread if it is already running trace/hwlat: Do not wipe the contents of per-cpu thread data tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static tracing: Fix wrong return in kprobe_event_gen_test.c	2023-03-19 10:46:02 -07:00
Vlastimil Babka	a98151ad53	ring-buffer: remove obsolete comment for free_buffer_page() ... The comment refers to mm/slob.c which is being removed. It comes from commit ed56829cb3 ("ring_buffer: reset buffer page when freeing") and according to Steven the borrowed code was a page mapcount and mapping reset, which was later removed by commit e4c2ce82ca ("ring_buffer: allocate buffer page pointer"). Thus the comment is not accurate anyway, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Reported-by: Mike Rapoport <mike.rapoport@gmail.com> Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Fixes: e4c2ce82ca ("ring_buffer: allocate buffer page pointer") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-03-19 13:23:22 -04:00
Linus Torvalds	b72b5fecc1	tracing updates for 6.3: ... - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PaaBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qh5iAPoD0LKZzD33rhO5Ec4hoexE0DkqycP3 dvmOMbCBL8GkxwEA+d2gLz/EquSFm166hc4D79Sn3geCqvkwmy8vQWVjIQc= =M82D -----END PGP SIGNATURE----- Merge tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups * tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits) tracing: Remove unnecessary NULL assignment tracepoint: Allow livepatch module add trace event tracing: Always use canonical ftrace path tracing/histogram: Fix stacktrace histogram Documententation tracing/histogram: Fix stacktrace key tracing/histogram: Fix a few problems with stacktrace variable printing tracing: Add BUILD_BUG() to make sure stacktrace fits in strings tracing/histogram: Don't use strlen to find length of stacktrace variables tracing: Allow boot instances to have snapshot buffers tracing: Add trace_array_puts() to write into instance tracing: Add enabling of events to boot instances tracing: Add creation of instances at boot command line tracing: Fix trace_event_raw_event_synth() if else statement samples: ftrace: Make some global variables static ftrace: sample: avoid open-coded 64-bit division samples: ftrace: Include the nospec-branch.h only for x86 tracing: Acquire buffer from temparary trace sequence tracing/histogram: Wrap remaining shell snippets in code blocks tracing/osnoise: No need for schedule_hrtimeout range bpf/tracing: Use stage6 of tracing to not duplicate macros ...	2023-02-23 10:20:49 -08:00
Ross Zwisler	2455f0e124	tracing: Always use canonical ftrace path ... The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many comments and Kconfig help messages in the tracing code still refer to this older debugfs path, so let's update them to avoid confusion. Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-02-18 14:34:09 -05:00
Mukesh Ojha	8843e06f67	ring-buffer: Handle race between rb_move_tail and rb_check_pages ... It seems a data race between ring_buffer writing and integrity check. That is, RB_FLAG of head_page is been updating, while at same time RB_FLAG was cleared when doing integrity check rb_check_pages(): rb_check_pages() rb_handle_head_page(): -------- -------- rb_head_page_deactivate() rb_head_page_set_normal() rb_head_page_activate() We do intergrity test of the list to check if the list is corrupted and it is still worth doing it. So, let's refactor rb_check_pages() such that we no longer clear and set flag during the list sanity checking. [1] and [2] are the test to reproduce and the crash report respectively. 1: ``` read_trace.sh while true; do # the "trace" file is closed after read head -1 /sys/kernel/tracing/trace > /dev/null done ``` ``` repro.sh sysctl -w kernel.panic_on_warn=1 # function tracer will writing enough data into ring_buffer echo function > /sys/kernel/tracing/current_tracer ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ``` 2: ------------[ cut here ]------------ WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653 rb_move_tail+0x450/0x470 Modules linked in: CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:rb_move_tail+0x450/0x470 Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24 83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83 f8 02 0f 84 ce fb ff ff e9 db RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203 RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18 RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400 RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2 R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000 R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108 FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0 Call Trace: <TASK> ring_buffer_lock_reserve+0x136/0x360 ? __do_softirq+0x287/0x2df ? __pfx_rcu_softirq_qs+0x10/0x10 trace_function+0x21/0x110 ? __pfx_rcu_softirq_qs+0x10/0x10 ? __do_softirq+0x287/0x2df function_trace_call+0xf6/0x120 0xffffffffc038f097 ? rcu_softirq_qs+0x5/0x140 rcu_softirq_qs+0x5/0x140 __do_softirq+0x287/0x2df run_ksoftirqd+0x2a/0x30 smpboot_thread_fn+0x188/0x220 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0xe7/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> ---[ end trace 0000000000000000 ]--- [ crash report and test reproducer credit goes to Zheng Yejian] Link: https://lore.kernel.org/linux-trace-kernel/1676376403-16462-1-git-send-email-quic_mojha@quicinc.com Cc: <mhiramat@kernel.org> Cc: stable@vger.kernel.org Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator") Reported-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-02-15 11:59:16 -05:00
Jia-Ju Bai	3e4272b995	tracing: Add NULL checks for buffer in ring_buffer_free_read_page() ... In a previous commit 7433632c9f, buffer, buffer->buffers and buffer->buffers[cpu] in ring_buffer_wake_waiters() can be NULL, and thus the related checks are added. However, in the same call stack, these variables are also used in ring_buffer_free_read_page(): tracing_buffers_release() ring_buffer_wake_waiters(iter->array_buffer->buffer) cpu_buffer = buffer->buffers[cpu] -> Add checks by previous commit ring_buffer_free_read_page(iter->array_buffer->buffer) cpu_buffer = buffer->buffers[cpu] -> No check Thus, to avod possible null-pointer derefernces, the related checks should be added. These results are reported by a static tool designed by myself. Link: https://lkml.kernel.org/r/20230113125501.760324-1-baijiaju1990@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2023-01-25 10:31:24 -05:00
Steven Rostedt	88ca6a71dc	ring-buffer: Handle resize in early boot up ... With the new command line option that allows trace event triggers to be added at boot, the "snapshot" trigger will allocate the snapshot buffer very early, when interrupts can not be enabled. Allocating the ring buffer is not the problem, but it also resizes it, which is, as the resize code does synchronization that can not be preformed at early boot. To handle this, first change the raw_spin_lock_irq() in rb_insert_pages() to raw_spin_lock_irqsave(), such that the unlocking of that spin lock will not enable interrupts. Next, where it calls schedule_work_on(), disable migration and check if the CPU to update is the current CPU, and if so, perform the work directly, otherwise re-enable migration and call the schedule_work_on() to the CPU that is being updated. The rb_insert_pages() just needs to be run on the CPU that it is updating, and does not need preemption nor interrupts disabled when calling it. Link: https://lore.kernel.org/lkml/Y5J%2FCajlNh1gexvo@google.com/ Link: https://lore.kernel.org/linux-trace-kernel/20221209101151.1fec1167@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: a01fdc897f ("tracing: Add trace_trigger kernel command line option") Reported-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2022-12-10 13:36:04 -05:00
Song Chen	04aabc32fb	ring_buffer: Remove unused "event" parameter ... After commit a389d86f7fd0 ("ring-buffer: Have nested events still record running time stamp"), the "event" parameter is no longer used in either ring_buffer_unlock_commit() or rb_commit(). Best to remove it. Link: https://lkml.kernel.org/r/1666274811-24138-1-git-send-email-chensong_2000@189.cn Signed-off-by: Song Chen <chensong_2000@189.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2022-11-23 19:08:30 -05:00
Daniil Tatianin	56f4ca0a79	ring_buffer: Do not deactivate non-existant pages ... rb_head_page_deactivate() expects cpu_buffer to contain a valid list of ->pages, so verify that the list is actually present before calling it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Link: https://lkml.kernel.org/r/20221114143129.3534443-1-d-tatianin@yandex-team.ru Cc: stable@vger.kernel.org Fixes: 77ae365eca ("ring-buffer: make lockless") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>	2022-11-17 17:10:40 -05:00