linux-imx/drivers/char/mwave
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
..
3780i.c
3780i.h
Makefile treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
mwavedd.c char/mwave: fix potential Spectre v1 vulnerability 2019-01-18 16:42:05 +01:00
mwavedd.h
mwavepub.h
README
smapi.c char/mwave: make some arrays static const to make object code smaller 2017-07-17 17:23:16 +02:00
smapi.h
tp3780i.c
tp3780i.h

Module options

The mwave module takes the following options. Note that these options are not saved by the BIOS and so do not persist after unload and reload.

mwave_debug=value, where value is bitwise OR of trace flags: 0x0001 mwavedd api tracing 0x0002 smapi api tracing 0x0004 3780i tracing 0x0008 tp3780i tracing

    Tracing only occurs if the driver has been compiled with the
    MW_TRACE macro #defined  (i.e. let ccflags-y := -DMW_TRACE
    in the Makefile).

mwave_3780i_irq=5/7/10/11/15 If the dsp irq has not been setup and stored in bios by the thinkpad configuration utility then this parameter allows the irq used by the dsp to be configured.

mwave_3780i_io=0x130/0x350/0x0070/0xDB0 If the dsp io range has not been setup and stored in bios by the thinkpad configuration utility then this parameter allows the io range used by the dsp to be configured.

mwave_uart_irq=3/4 If the mwave's uart irq has not been setup and stored in bios by the thinkpad configuration utility then this parameter allows the irq used by the mwave uart to be configured.

mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8 If the uart io range has not been setup and stored in bios by the thinkpad configuration utility then this parameter allows the io range used by the mwave uart to be configured.

Example to enable the 3780i DSP using ttyS1 resources:

insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8

Accessing the driver

You must also create a node for the driver: mkdir -p /dev/modems mknod --mode=660 /dev/modems/mwave c 10 219