dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema

Convert the Marvell Armada-3700 UART binding to DT schema. It is a
straight-forward conversion.

Drop the long deprecated single interrupt support.

Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154408.1595932-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml

@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/marvell,armada-3700-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada-3700 UART
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+description:
+  Marvell UART is a non standard UART used in some of Marvell EBU SoCs (e.g.
+  Armada-3700).
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-3700-uart
+      - marvell,armada-3700-uart-ext
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      UART reference clock used to derive the baud rate. If absent, only fixed
+      baud rate from the bootloader is supported.
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: UART sum interrupt
+      - description: UART TX interrupt
+      - description: UART RX interrupt
+
+  interrupt-names:
+    minItems: 2
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+  - if:
+      properties:
+        compatible:
+          const: marvell,armada-3700-uart-ext
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+
+        interrupt-names:
+          items:
+            - const: uart-tx
+            - const: uart-rx
+    else:
+      properties:
+        interrupts:
+          minItems: 3
+
+        interrupt-names:
+          items:
+            - const: uart-sum
+            - const: uart-tx
+            - const: uart-rx
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@12000 {
+        compatible = "marvell,armada-3700-uart";
+        reg = <0x12000 0x18>;
+        clocks = <&uartclk 0>;
+        interrupts =
+            <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+            <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+            <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uart-sum", "uart-tx", "uart-rx";
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@12200 {
+        compatible = "marvell,armada-3700-uart-ext";
+        reg = <0x12200 0x30>;
+        clocks = <&uartclk 1>;
+        interrupts =
+            <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+            <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "uart-tx", "uart-rx";
+    };

Documentation/devicetree/bindings/serial/mvebu-uart.txt

@@ -1,56 +0,0 @@
-* Marvell UART : Non standard UART used in some of Marvell EBU SoCs
-                 e.g., Armada-3700.
-
-Required properties:
-- compatible:
-    - "marvell,armada-3700-uart" for the standard variant of the UART
-      (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the
-      FIFO), called also UART1.
-    - "marvell,armada-3700-uart-ext" for the extended variant of the
-      UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit
-      accesses to the FIFO), called also UART2.
-- reg: offset and length of the register set for the device.
-- clocks: UART reference clock used to derive the baudrate. If no clock
-      is provided (possible only with the "marvell,armada-3700-uart"
-      compatible string for backward compatibility), it will only work
-      if the baudrate was initialized by the bootloader and no baudrate
-      change will then be possible. When provided it should be UART1-clk
-      for standard variant of UART and UART2-clk for extended variant
-      of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock
-      should not be used and are supported only for backward compatibility.
-- interrupts:
-    - Must contain three elements for the standard variant of the IP
-      (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx",
-      respectively the UART sum interrupt, the UART TX interrupt and
-      UART RX interrupt. A corresponding interrupt-names property must
-      be defined.
-    - Must contain two elements for the extended variant of the IP
-      (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx",
-      respectively the UART TX interrupt and the UART RX interrupt. A
-      corresponding interrupt-names property must be defined.
-    - For backward compatibility reasons, a single element interrupts
-      property is also supported for the standard variant of the IP,
-      containing only the UART sum interrupt. This form is deprecated
-      and should no longer be used.
-
-Example:
-	uart0: serial@12000 {
-		compatible = "marvell,armada-3700-uart";
-		reg = <0x12000 0x18>;
-		clocks = <&uartclk 0>;
-		interrupts =
-		<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "uart-sum", "uart-tx", "uart-rx";
-	};
-
-	uart1: serial@12200 {
-		compatible = "marvell,armada-3700-uart-ext";
-		reg = <0x12200 0x30>;
-		clocks = <&uartclk 1>;
-		interrupts =
-		<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
-		<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "uart-tx", "uart-rx";
-	};

MAINTAINERS

@@ -14275,7 +14275,7 @@ MARVELL ARMADA 3700 SERIAL DRIVER
 M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
-F:	Documentation/devicetree/bindings/serial/mvebu-uart.txt
+F:	Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml
 F:	drivers/tty/serial/mvebu-uart.c
 
 MARVELL ARMADA DRM SUPPORT