soc: new SoC support for 6.14

Two new SoC families are added here, with devicetree files and
 a little bit of infrastructure to allow booting:
 
  - Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming
    Processor) cores for computation, and two small Cortex-A53 cores
    that run the operating system.
 
  - SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22
    compatible CPU cores with vector support.
    Also marketed at AI applications, it has a much slower NPU compared
    to BLZP1600, but in turn focuses on the CPU performance
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmeSd7cACgkQYKtH/8kJ
 UienxxAAoUMAWex/k5gWfg3DdvDrleXydjYzIm6DBIad1kxHYy/gvEuQAgV9vxqb
 tQ763NKRLekmwv+CX+S47PjrMHgqqwtch5If8ixd50gYSZPukJmuCTkthMu1qBb9
 /zi0LXg3cViPQBAY0MwCQMzukRHsqmBzaUSle6bM1yDHhHAmcz88Iqs/LttJOnYk
 M/+ybxYoUdVmPI+Nt3e8hxlecfU2oM0S1hoStvdsA0fpuLfEBF8WpF7DnkSphT10
 JqVysB3FTF0PYXyBodcuh37iCCObAFVAUT/ZvKO3+Qo/rI2IseP8lSeAV84JP/5S
 w4MqpGhFecICBEWJ9h0FnbSI2NyON8uz23R+va6YAtTxuPL2Loq4HwvxXh5H5imC
 sxZ0SEnkwFQ7DJ10nV00FXlmKZ7+Ax0WLoboNHWYxdAfqhgcZ8q8gi/+WTETTBog
 jnTnWjscuEA5QTNfOP0AqUtVbWQOj09wLsiceJc8G5jpbe9WaZJy1yzXaCNu2hZV
 2x+2UT31Y6G2Poxee8Ti4u1ljieJh5BmD1Ts81P8EpAC0JsVyJ3HtouYeBHcBPoj
 HXmdGDPN8bS0Ugu7iFu3GO+TPcBzUw1ZND8L3QbBesb/oFK0455ARkVXO2nazP4p
 4s/iGWbGAKIyKPOdYGaiSXmbXurx99pOVY6G8ccqkNf+17MfTgE=
 =clzA
 -----END PGP SIGNATURE-----

Merge tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull new SoC support from Arnd Bergmann:
 "Two new SoC families are added here, with devicetree files and a
  little bit of infrastructure to allow booting:

   - Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming
     Processor) cores for computation, and two small Cortex-A53 cores
     that run the operating system.

   - SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22
     compatible CPU cores with vector support.

     Also marketed at AI applications, it has a much slower NPU compared
     to BLZP1600, but in turn focuses on the CPU performance"

* tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  riscv: dts: spacemit: move aliases to board dts
  riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
  riscv: defconfig: enable SpacemiT SoC
  riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
  riscv: dts: add initial SpacemiT K1 SoC device tree
  riscv: add SpacemiT SoC family Kconfig support
  dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
  dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
  dt-bindings: timer: Add SpacemiT K1 CLINT
  dt-bindings: riscv: add SpacemiT K1 bindings
  dt-bindings: riscv: Add SpacemiT X60 compatibles
  MAINTAINERS: setup support for SpacemiT SoC tree
  MAINTAINER: Add entry for Blaize SoC
  arm64: defconfig: Enable Blaize BLZP1600 platform
  arm64: dts: Add initial support for Blaize BLZP1600 CB2
  arm64: Add Blaize BLZP1600 SoC family
  dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC
  dt-bindings: Add Blaize vendor prefix

Documentation/devicetree/bindings/arm/blaize.yaml

@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/blaize.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Blaize Platforms
+
+maintainers:
+  - James Cowgill <james.cowgill@blaize.com>
+  - Matt Redfearn <matt.redfearn@blaize.com>
+  - Neil Jones <neil.jones@blaize.com>
+  - Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
+
+description: |
+  Blaize Platforms using SoCs designed by Blaize Inc.
+
+  The products based on the BLZP1600 SoC:
+
+  - BLZP1600-SoM: SoM (System on Module)
+  - BLZP1600-CB2: Development board CB2 based on BLZP1600-SoM
+
+  BLZP1600 SoC integrates a dual core ARM Cortex A53 cluster
+  and a Blaize Graph Streaming Processor for AI and ML workloads,
+  plus a suite of connectivity and other peripherals.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Blaize BLZP1600 based boards
+        items:
+          - enum:
+              - blaize,blzp1600-cb2
+          - const: blaize,blzp1600
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml

@@ -59,6 +59,7 @@ properties:
           - enum:
               - canaan,k210-plic
               - sifive,fu540-c000-plic
+              - spacemit,k1-plic
               - starfive,jh7100-plic
               - starfive,jh7110-plic
           - const: sifive,plic-1.0.0

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -46,6 +46,7 @@ properties:
               - sifive,u7
               - sifive,u74
               - sifive,u74-mc
+              - spacemit,x60
               - thead,c906
               - thead,c908
               - thead,c910

Documentation/devicetree/bindings/riscv/spacemit.yaml

@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/spacemit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT SoC-based boards
+
+maintainers:
+  - Yangyu Chen <cyy@cyyself.name>
+  - Yixun Lan <dlan@gentoo.org>
+
+description:
+  SpacemiT SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - bananapi,bpi-f3
+          - const: spacemit,k1
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/serial/8250.yaml

@@ -111,7 +111,9 @@ properties:
               - mediatek,mt7623-btif
           - const: mediatek,mtk-btif
       - items:
-          - const: mrvl,mmp-uart
+          - enum:
+              - mrvl,mmp-uart
+              - spacemit,k1-uart
           - const: intel,xscale-uart
       - items:
           - enum:

Documentation/devicetree/bindings/timer/sifive,clint.yaml

@@ -31,6 +31,7 @@ properties:
           - enum:
               - canaan,k210-clint       # Canaan Kendryte K210
               - sifive,fu540-c000-clint # SiFive FU540
+              - spacemit,k1-clint       # SpacemiT K1
               - starfive,jh7100-clint   # StarFive JH7100
               - starfive,jh7110-clint   # StarFive JH7110
               - starfive,jh8100-clint   # StarFive JH8100

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -218,6 +218,8 @@ patternProperties:
     description: Shenzhen BigTree Tech Co., LTD
   "^bitmain,.*":
     description: Bitmain Technologies
+  "^blaize,.*":
+    description: Blaize, Inc.
   "^blutek,.*":
     description: BluTek Power
   "^boe,.*":

MAINTAINERS

@@ -2309,6 +2309,15 @@ F:	arch/arm64/boot/dts/bitmain/
 F:	drivers/clk/clk-bm1880.c
 F:	drivers/pinctrl/pinctrl-bm1880.c
 
+ARM/BLAIZE ARCHITECTURE
+M:	James Cowgill <james.cowgill@blaize.com>
+M:	Matt Redfearn <matt.redfearn@blaize.com>
+M:	Neil Jones <neil.jones@blaize.com>
+M:	Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/arm/blaize.yaml
+F:	arch/arm64/boot/dts/blaize/
+
 ARM/CALXEDA HIGHBANK ARCHITECTURE
 M:	Andre Przywara <andre.przywara@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -20274,6 +20283,15 @@ F:	drivers/perf/riscv_pmu.c
 F:	drivers/perf/riscv_pmu_legacy.c
 F:	drivers/perf/riscv_pmu_sbi.c
 
+RISC-V SPACEMIT SoC Support
+M:	Yixun Lan <dlan@gentoo.org>
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+T:	git https://github.com/spacemit-com/linux
+F:	arch/riscv/boot/dts/spacemit/
+N:	spacemit
+K:	spacemit
+
 RISC-V THEAD SoC SUPPORT
 M:	Drew Fustini <drew@pdp7.com>
 M:	Guo Ren <guoren@kernel.org>

arch/arm64/Kconfig.platforms

@@ -101,6 +101,11 @@ config ARCH_BITMAIN
 	help
 	  This enables support for the Bitmain SoC Family.
 
+config ARCH_BLAIZE
+	bool "Blaize SoC Platforms"
+	help
+	  This enables support for the Blaize SoC family
+
 config ARCH_EXYNOS
 	bool "Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG

arch/arm64/boot/dts/Makefile

@@ -10,6 +10,7 @@ subdir-y += apm
 subdir-y += apple
 subdir-y += arm
 subdir-y += bitmain
+subdir-y += blaize
 subdir-y += broadcom
 subdir-y += cavium
 subdir-y += exynos

arch/arm64/boot/dts/blaize/Makefile

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0+
+dtb-$(CONFIG_ARCH_BLAIZE) += blaize-blzp1600-cb2.dtb

arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts

@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "blaize-blzp1600-som.dtsi"
+
+/ {
+	model = "Blaize BLZP1600 SoM1600P CB2 Development Board";
+
+	compatible = "blaize,blzp1600-cb2", "blaize,blzp1600";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	gpio_expander: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RSP_PIN_7",	/* GPIO_0 */
+				  "RSP_PIN_11",	/* GPIO_1 */
+				  "RSP_PIN_13",	/* GPIO_2 */
+				  "RSP_PIN_15",	/* GPIO_3 */
+				  "RSP_PIN_27",	/* GPIO_4 */
+				  "RSP_PIN_29",	/* GPIO_5 */
+				  "RSP_PIN_31",	/* GPIO_6 */
+				  "RSP_PIN_33",	/* GPIO_7 */
+				  "RSP_PIN_37",	/* GPIO_8 */
+				  "RSP_PIN_16",	/* GPIO_9 */
+				  "RSP_PIN_18",	/* GPIO_10 */
+				  "RSP_PIN_22",	/* GPIO_11 */
+				  "RSP_PIN_28",	/* GPIO_12 */
+				  "RSP_PIN_32",	/* GPIO_13 */
+				  "RSP_PIN_36",	/* GPIO_14 */
+				  "TP31";	/* GPIO_15 */
+	};
+
+	gpio_expander_m2: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "M2_W_DIS1_N",	/* GPIO_0 */
+				  "M2_W_DIS2_N",	/* GPIO_1 */
+				  "M2_UART_WAKE_N",	/* GPIO_2 */
+				  "M2_COEX3",		/* GPIO_3 */
+				  "M2_COEX_RXD",	/* GPIO_4 */
+				  "M2_COEX_TXD",	/* GPIO_5 */
+				  "M2_VENDOR_PIN40",	/* GPIO_6 */
+				  "M2_VENDOR_PIN42",	/* GPIO_7 */
+				  "M2_VENDOR_PIN38",	/* GPIO_8 */
+				  "M2_SDIO_RST_N",	/* GPIO_9 */
+				  "M2_SDIO_WAKE_N",	/* GPIO_10 */
+				  "M2_PETN1",		/* GPIO_11 */
+				  "M2_PERP1",		/* GPIO_12 */
+				  "M2_PERN1",		/* GPIO_13 */
+				  "UIM_SWP",		/* GPIO_14 */
+				  "UART1_TO_RSP";	/* GPIO_15 */
+	};
+};

arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi

@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+#include "blaize-blzp1600.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x1 0x0>;
+	};
+};
+
+/* i2c4 bus is available only on the SoM, not on the board */
+&i2c4 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};

arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi

@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82002000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			shmem = <&scmi0_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_rst: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* SCMI reserved buffer space on DDR space */
+		scmi0_shm: scmi-shmem@800 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x800 0x0 0x80>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = /* Physical Secure PPI */
+			     <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Physical Non-Secure PPI */
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Hypervisor PPI */
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Virtual PPI */
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x2 0x0 0x850000>;
+
+		gic: interrupt-controller@410000 {
+			compatible = "arm,gic-400";
+			reg = <0x410000 0x20000>,
+			      <0x420000 0x20000>,
+			      <0x440000 0x20000>,
+			      <0x460000 0x20000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x3) |
+						 IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		uart0: serial@4d0000 {
+			compatible = "ns16550a";
+			reg = <0x4d0000 0x1000>;
+			clocks = <&scmi_clk 59>;
+			resets = <&scmi_rst 59>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@4e0000 {
+			compatible = "ns16550a";
+			reg = <0x4e0000 0x1000>;
+			clocks = <&scmi_clk 60>;
+			resets = <&scmi_rst 60>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@4f0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x4f0000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 54>;
+			resets = <&scmi_rst 54>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@500000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x500000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 55>;
+			resets = <&scmi_rst 55>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@510000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x510000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 56>;
+			resets = <&scmi_rst 56>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@520000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x520000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 57>;
+			resets = <&scmi_rst 57>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@530000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x530000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 58>;
+			resets = <&scmi_rst 58>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc712: crypto@550000 {
+			compatible = "arm,cryptocell-712-ree";
+			reg = <0x550000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 7>;
+		};
+	};
+};

arch/arm64/configs/defconfig

@@ -44,6 +44,7 @@ CONFIG_ARCH_BCM_IPROC=y
 CONFIG_ARCH_BCMBCA=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
+CONFIG_ARCH_BLAIZE=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_SPARX5=y
 CONFIG_ARCH_K3=y

arch/riscv/Kconfig.socs

@@ -24,6 +24,11 @@ config ARCH_SOPHGO
 	help
 	  This enables support for Sophgo SoC platform hardware.
 
+config ARCH_SPACEMIT
+	bool "SpacemiT SoCs"
+	help
+	  This enables support for SpacemiT SoC platform hardware.
+
 config ARCH_STARFIVE
 	def_bool SOC_STARFIVE
 

arch/riscv/boot/dts/Makefile

@@ -5,6 +5,7 @@ subdir-y += microchip
 subdir-y += renesas
 subdir-y += sifive
 subdir-y += sophgo
+subdir-y += spacemit
 subdir-y += starfive
 subdir-y += thead
 

arch/riscv/boot/dts/spacemit/Makefile

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-f3.dtb

arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts

@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
+ */
+
+#include "k1.dtsi"
+#include "k1-pinctrl.dtsi"
+
+/ {
+	model = "Banana Pi BPI-F3";
+	compatible = "bananapi,bpi-f3", "spacemit,k1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_2_cfg>;
+	status = "okay";
+};

arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi

@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2024 Yixun Lan <dlan@gentoo.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define K1_PADCONF(pin, func) (((pin) << 16) | (func))
+
+&pinctrl {
+	uart0_2_cfg: uart0-2-cfg {
+		uart0-2-pins {
+			pinmux = <K1_PADCONF(68, 2)>,
+				 <K1_PADCONF(69, 2)>;
+
+			bias-pull-up = <0>;
+			drive-strength = <32>;
+		};
+	};
+};

arch/riscv/boot/dts/spacemit/k1.dtsi

@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "SpacemiT K1";
+	compatible = "spacemit,k1";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <24000000>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_0>;
+				};
+				core1 {
+					cpu = <&cpu_1>;
+				};
+				core2 {
+					cpu = <&cpu_2>;
+				};
+				core3 {
+					cpu = <&cpu_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_4>;
+				};
+				core1 {
+					cpu = <&cpu_5>;
+				};
+				core2 {
+					cpu = <&cpu_6>;
+				};
+				core3 {
+					cpu = <&cpu_7>;
+				};
+			};
+		};
+
+		cpu_0: cpu@0 {
+			compatible = "spacemit,x60", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+					       "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+					       "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+					       "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+					       "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <32768>;
+			i-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-size = <32768>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster0_l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu_1: cpu@1 {
+			compatible = "spacemit,x60", "riscv";
+			device_type = "cpu";
+			reg = <1>;
+			riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+					       "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+					       "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+					       "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+					       "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <32768>;
+			i-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-size = <32768>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster0_l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu_2: cpu@2 {
+			compatible = "spacemit,x60", "riscv";
+			device_type = "cpu";
+			reg = <2>;
+			riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+					       "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+					       "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+					       "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+					       "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <32768>;
+			i-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-size = <32768>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster0_l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu_3: cpu@3 {
+			compatible = "spacemit,x60", "riscv";
+			device_type = "cpu";
+			reg = <3>;
+			riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+					       "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+					       "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+					       "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+					       "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <32768>;
+			i-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-size = <32768>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster0_l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu_4: cpu@4 {
+			compatible = "spacemit,x60", "riscv";
+			device_type = "cpu";
+			reg = <4>;
+			riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+					       "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+					       "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+					       "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+					       "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <32768>;
+			i-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-size = <32768>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster1_l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu4_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu_5: cpu@5 {
+			compatible = "spacemit,x60", "riscv";
+			device_type = "cpu";
+			reg = <5>;
+			riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+					       "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+					       "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+					       "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+					       "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <32768>;
+			i-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-size = <32768>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster1_l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu5_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu_6: cpu@6 {
+			compatible = "spacemit,x60", "riscv";
+			device_type = "cpu";
+			reg = <6>;
+			riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+					       "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+					       "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+					       "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+					       "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <32768>;
+			i-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-size = <32768>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster1_l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu6_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu_7: cpu@7 {
+			compatible = "spacemit,x60", "riscv";
+			device_type = "cpu";
+			reg = <7>;
+			riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+					       "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+					       "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+					       "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+					       "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <32768>;
+			i-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-size = <32768>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster1_l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu7_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cluster0_l2_cache: l2-cache0 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <512>;
+			cache-unified;
+		};
+
+		cluster1_l2_cache: l2-cache1 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <512>;
+			cache-unified;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+		ranges;
+
+		uart0: serial@d4017000 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017000 0x0 0x100>;
+			interrupts = <42>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@d4017100 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017100 0x0 0x100>;
+			interrupts = <44>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@d4017200 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017200 0x0 0x100>;
+			interrupts = <45>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart4: serial@d4017300 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017300 0x0 0x100>;
+			interrupts = <46>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart5: serial@d4017400 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017400 0x0 0x100>;
+			interrupts = <47>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart6: serial@d4017500 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017500 0x0 0x100>;
+			interrupts = <48>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart7: serial@d4017600 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017600 0x0 0x100>;
+			interrupts = <49>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart8: serial@d4017700 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017700 0x0 0x100>;
+			interrupts = <50>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart9: serial@d4017800 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017800 0x0 0x100>;
+			interrupts = <51>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@d401e000 {
+			compatible = "spacemit,k1-pinctrl";
+			reg = <0x0 0xd401e000 0x0 0x400>;
+		};
+
+		plic: interrupt-controller@e0000000 {
+			compatible = "spacemit,k1-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xe0000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>,
+					      <&cpu5_intc 11>, <&cpu5_intc 9>,
+					      <&cpu6_intc 11>, <&cpu6_intc 9>,
+					      <&cpu7_intc 11>, <&cpu7_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			riscv,ndev = <159>;
+		};
+
+		clint: timer@e4000000 {
+			compatible = "spacemit,k1-clint", "sifive,clint0";
+			reg = <0x0 0xe4000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>,
+					      <&cpu5_intc 3>, <&cpu5_intc 7>,
+					      <&cpu6_intc 3>, <&cpu6_intc 7>,
+					      <&cpu7_intc 3>, <&cpu7_intc 7>;
+		};
+
+		sec_uart1: serial@f0612000 {
+			compatible = "spacemit,k1-uart", "intel,xscale-uart";
+			reg = <0x0 0xf0612000 0x0 0x100>;
+			interrupts = <43>;
+			clock-frequency = <14857000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "reserved"; /* for TEE usage */
+		};
+	};
+};

arch/riscv/configs/defconfig

@@ -30,6 +30,7 @@ CONFIG_ARCH_MICROCHIP=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_SIFIVE=y
 CONFIG_ARCH_SOPHGO=y
+CONFIG_ARCH_SPACEMIT=y
 CONFIG_SOC_STARFIVE=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_THEAD=y