The current code provokes some kernel-doc warnings:
drivers/char/ipmi/ipmi_msghandler.c:618: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-Id: <20221025060436.4372-1-liubo03@inspur.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This fixes the following sparse warning:
sparse warnings: (new ones prefixed by >>)
>> drivers/char/ipmi/ssif_bmc.c:254:22: sparse: sparse: invalid assignment: |=
>> drivers/char/ipmi/ssif_bmc.c:254:22: sparse: left side has type restricted __poll_t
>> drivers/char/ipmi/ssif_bmc.c:254:22: sparse: right side has type int
Fixes: dd2bc5cc9e ("ipmi: ssif_bmc: Add SSIF BMC driver")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202210181103.ontD9tRT-lkp@intel.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-Id: <20221024075956.3312552-1-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If you continue to access and send messages at a high frequency (once
every 55s) when the IPMI is disconnected, messages will accumulate in
intf->[hp_]xmit_msg. If it lasts long enough, it takes up a lot of
memory.
The reason is that if IPMI is disconnected, each message will be set to
IDLE after it returns to HOSED through IDLE->ERROR0->HOSED. The next
message goes through the same process when it comes in. This process
needs to wait for IBF_TIMEOUT * (MAX_ERROR_RETRIES + 1) = 55s.
Each message takes 55S to destroy. This results in a continuous increase
in memory.
I find that if I wait 5 seconds after the first message fails, the
status changes to ERROR0 in smi_timeout(). The next message will return
the error code IPMI_NOT_IN_MY_STATE_ERR directly without wait.
This is more in line with our needs.
So instead of setting each message state to IDLE after it reaches the
state HOSED, set state to ERROR0.
After testing, the problem has been solved, no matter how many
consecutive sends, will not cause continuous memory growth. It also
returns to normal immediately after the IPMI is restored.
In addition, the HOSED state should also count as invalid. So the HOSED
is removed from the invalid judgment in start_kcs_transaction().
The verification operations are as follows:
1. Use BPF to record the ipmi_alloc/free_smi_msg().
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
2. Exec `date; time for x in $(seq 1 2); do ipmitool mc info; done`.
3. Record the output of `time` and when free all msgs.
Before:
`time` takes 120s, This is because `ipmitool mc info` send 4 msgs and
waits only 15 seconds for each message. Last msg is free after 440s.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
Oct 05 11:40:55 Attaching 2 probes...
Oct 05 11:41:12 alloc 0xffff9558a05f0c00
Oct 05 11:41:27 alloc 0xffff9558a05f1a00
Oct 05 11:41:42 alloc 0xffff9558a05f0000
Oct 05 11:41:57 alloc 0xffff9558a05f1400
Oct 05 11:42:07 free 0xffff9558a05f0c00
Oct 05 11:42:07 alloc 0xffff9558a05f7000
Oct 05 11:42:22 alloc 0xffff9558a05f2a00
Oct 05 11:42:37 alloc 0xffff9558a05f5a00
Oct 05 11:42:52 alloc 0xffff9558a05f3a00
Oct 05 11:43:02 free 0xffff9558a05f1a00
Oct 05 11:43:57 free 0xffff9558a05f0000
Oct 05 11:44:52 free 0xffff9558a05f1400
Oct 05 11:45:47 free 0xffff9558a05f7000
Oct 05 11:46:42 free 0xffff9558a05f2a00
Oct 05 11:47:37 free 0xffff9558a05f5a00
Oct 05 11:48:32 free 0xffff9558a05f3a00
$ root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do
ipmitool mc info; done
Wed Oct 5 11:41:12 CST 2022
No data available
Get Device ID command failed
No data available
No data available
No valid response received
Get Device ID command failed: Unspecified error
No data available
Get Device ID command failed
No data available
No data available
No valid response received
No data available
Get Device ID command failed
real 1m55.052s
user 0m0.001s
sys 0m0.001s
After:
`time` takes 55s, all msgs is returned and free after 55s.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
Oct 07 16:30:35 Attaching 2 probes...
Oct 07 16:30:45 alloc 0xffff955943aa9800
Oct 07 16:31:00 alloc 0xffff955943aacc00
Oct 07 16:31:15 alloc 0xffff955943aa8c00
Oct 07 16:31:30 alloc 0xffff955943aaf600
Oct 07 16:31:40 free 0xffff955943aa9800
Oct 07 16:31:40 free 0xffff955943aacc00
Oct 07 16:31:40 free 0xffff955943aa8c00
Oct 07 16:31:40 free 0xffff955943aaf600
Oct 07 16:31:40 alloc 0xffff9558ec8f7e00
Oct 07 16:31:40 free 0xffff9558ec8f7e00
Oct 07 16:31:40 alloc 0xffff9558ec8f7800
Oct 07 16:31:40 free 0xffff9558ec8f7800
Oct 07 16:31:40 alloc 0xffff9558ec8f7e00
Oct 07 16:31:40 free 0xffff9558ec8f7e00
Oct 07 16:31:40 alloc 0xffff9558ec8f7800
Oct 07 16:31:40 free 0xffff9558ec8f7800
root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do
ipmitool mc info; done
Fri Oct 7 16:30:45 CST 2022
No data available
Get Device ID command failed
No data available
No data available
No valid response received
Get Device ID command failed: Unspecified error
Get Device ID command failed: 0xd5 Command not supported in present state
Get Device ID command failed: Command not supported in present state
real 0m55.038s
user 0m0.001s
sys 0m0.001s
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221009091811.40240-2-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
After the IPMI disconnect problem, the memory kept rising and we tried
to unload the driver to free the memory. However, only part of the
free memory is recovered after the driver is uninstalled. Using
ebpf to hook free functions, we find that neither ipmi_user nor
ipmi_smi_msg is free, only ipmi_recv_msg is free.
We find that the deliver_smi_err_response call in clean_smi_msgs does
the destroy processing on each message from the xmit_msg queue without
checking the return value and free ipmi_smi_msg.
deliver_smi_err_response is called only at this location. Adding the
free handling has no effect.
To verify, try using ebpf to trace the free function.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc rcv
%p\n",retval);} kprobe:free_recv_msg {printf("free recv %p\n",
arg0)} kretprobe:ipmi_alloc_smi_msg {printf("alloc smi %p\n",
retval);} kprobe:free_smi_msg {printf("free smi %p\n",arg0)}'
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-4-zhangyuchen.lcr@bytedance.com>
[Fixed the comment above handle_one_recv_msg().]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When fixing the problem mentioned in PATCH1, we also found
the following problem:
If the IPMI is disconnected and in the sending process, the
uninstallation driver will be stuck for a long time.
The main problem is that uninstalling the driver waits for curr_msg to
be sent or HOSED. After stopping tasklet, the only place to trigger the
timeout mechanism is the circular poll in shutdown_smi.
The poll function delays 10us and calls smi_event_handler(smi_info,10).
Smi_event_handler deducts 10us from kcs->ibf_timeout.
But the poll func is followed by schedule_timeout_uninterruptible(1).
The time consumed here is not counted in kcs->ibf_timeout.
So when 10us is deducted from kcs->ibf_timeout, at least 1 jiffies has
actually passed. The waiting time has increased by more than a
hundredfold.
Now instead of calling poll(). call smi_event_handler() directly and
calculate the elapsed time.
For verification, you can directly use ebpf to check the kcs->
ibf_timeout for each call to kcs_event() when IPMI is disconnected.
Decrement at normal rate before unloading. The decrement rate becomes
very slow after unloading.
$ bpftrace -e 'kprobe:kcs_event {printf("kcs->ibftimeout : %d\n",
*(arg0+584));}'
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-3-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
The ASPEED KCS devices don't provide a BMC-side interrupt for the host
reading the output data register (ODR). The act of the host reading ODR
clears the output buffer full (OBF) flag in the status register (STR),
informing the BMC it can transmit a subsequent byte.
On the BMC side the KCS client must enable the OBE event *and* perform a
subsequent read of STR anyway to avoid races - the polling provides a
window for the host to read ODR if data was freshly written while
minimising BMC-side latency.
Fixes: 28651e6c42 ("ipmi: kcs_bmc: Allow clients to control KCS IRQ state")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220812144741.240315-1-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The SMBus system interface (SSIF) IPMI BMC driver can be used to perform
in-band IPMI communication with their host in management (BMC) side.
Thanks Dan for the copy_from_user() fix in the link below.
Link: https://lore.kernel.org/linux-arm-kernel/20220310114119.13736-4-quan@os.amperecomputing.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-Id: <20221004093106.1653317-2-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet.
-----BEGIN PGP SIGNATURE-----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=wVwj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Fix a bunch of little problems in IPMI
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet"
* tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Remove unused struct watcher_entry
ipmi: kcs: aspeed: Update port address comments
ipmi: Add __init/__exit annotations to module init/exit funcs
ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure
ipmi:ipmb: Fix a vague comment and a typo
dt-binding: ipmi: add fallback to npcm845 compatible
ipmi: Fix comment typo
char: ipmi: modify NPCM KCS configuration
dt-bindings: ipmi: Add npcm845 compatible
After commit e86ee2d44b44("ipmi: Rework locking and shutdown for hot remove"),
no one use struct watcher_entry, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20220927133814.98929-1-yuancan@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Remove AST_usrGuide_KCS.pdf as it is no longer maintained.
Add more descriptions as the driver now supports the I/O
address configurations for both the KCS Data and Cmd/Status
interface registers.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Message-Id: <20220920020333.601-1-chiawei_wang@aspeedtech.com>
[I don't like removing documentation, but the document in question
was a personal note by an employee and nothing official and not
necessarily guaranteed to be accurate in the future. So go
ahead and remove it.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The data structure won't be set up to be unregistered, and it can result in
crashes if the register fails.
Signed-off-by: Corey Minyard <minyard@acm.org>
Sending an IPMI response message gets a reponse to the response, but the
comment saying that just said "response response", which is hard to
understand. Also fix an obvious typo.
Reported-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The double `the' is duplicated in line 4360, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20220715054156.6342-1-wangborong@cdjrlc.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 00d93611f0 ("ipmi:ipmb: Add the ability to have a separate slave and master device")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220512044445.3102-1-linmq006@gmail.com>
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There were two identical logs in two different places, so you couldn't
tell which one was being logged. Make them unique.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The was it was wouldn't work in some situations, simplify it. What was
there was unnecessary complexity.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Don't hand-initialize the struct here, create a macro to initialize it
so new fields added don't get forgotten in places.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There was a "type" element added to this structure, but some static
values were missed. The default value will be zero, which is correct,
but create an initializer for the type and initialize the type properly
in the initializer to avoid future issues.
Reported-by: Joe Wiese <jwiese@rackspace.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Even though it's not possible to get into the SSIF_GETTING_MESSAGES and
SSIF_GETTING_EVENTS states without a valid message in the msg field,
it's probably best to be defensive here and check and print a log, since
that means something else went wrong.
Also add a default clause to that switch statement to release the lock
and print a log, in case the state variable gets messed up somehow.
Reported-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Message-Id: <20220324171159.544565-1-steve@sk2.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Go through each user and add its message count to a total and print the
total.
It would be nice to have a per-user file, but there's no user sysfs
entity at this point to hang it off of. Probably not worth the effort.
Based on work by Chen Guanqiao <chen.chenchacha@foxmail.com>
Cc: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A count of users is kept for each interface, allow it to be viewed.
Based on work by Chen Guanqiao <chen.chenchacha@foxmail.com>
Cc: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This way a rogue application can't use up a bunch of memory.
Based on work by Chen Guanqiao <chen.chenchacha@foxmail.com>
Cc: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Each user uses memory, we need limits to avoid a rogue program from
running the system out of memory.
Based on work by Chen Guanqiao <chen.chenchacha@foxmail.com>
Cc: Chen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
KASAN report null-ptr-deref as follows:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:ipmi_unregister_smi+0x7d/0xd50 drivers/char/ipmi/ipmi_msghandler.c:3680
Call Trace:
ipmi_ipmb_remove+0x138/0x1a0 drivers/char/ipmi/ipmi_ipmb.c:443
ipmi_ipmb_probe+0x409/0xda1 drivers/char/ipmi/ipmi_ipmb.c:548
i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563
really_probe+0x3f3/0xa70 drivers/base/dd.c:541
In ipmi_ipmb_probe(), 'iidev->intf' is not set before
ipmi_register_smi() success. And in the error handling case,
ipmi_ipmb_remove() is called to release resources, ipmi_unregister_smi()
is called without check 'iidev->intf', this will cause KASAN
null-ptr-deref issue.
General kernel style is to allow NULL to be passed into unregister
calls, so fix it that way. This allows a NULL check to be removed in
other code.
Fixes: 57c9e3c9a3 ("ipmi:ipmi_ipmb: Unregister the SMI on remove")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: stable@vger.kernel.org # v5.17+
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A chunk was dropped when the code handling send messages was rewritten.
Those messages shouldn't be processed normally, they are just an
indication that the message was successfully sent and the timers should
be started for the real response that should be coming later.
Add back in the missing chunk to just discard the message and go on.
Fixes: 059747c245 ("ipmi: Add support for IPMB direct messages")
Reported-by: Joe Wiese <jwiese@rackspace.com>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Joe Wiese <jwiese@rackspace.com>
Clang static analysis reports this issue
ipmi_ssif.c:1731:3: warning: 4th function call
argument is an uninitialized value
dev_info(&ssif_info->client->dev,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The 4th parameter is the 'len' variable.
len is only set by a successful call to do_cmd().
Initialize to len 0.
Signed-off-by: Tom Rix <trix@redhat.com>
Message-Id: <20220320135954.2258545-1-trix@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It's been a few releases since we depreciated the "v1" bindings. Remove
support from the driver as all known device trees have been updated to
use the new bindings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220228062840.449215-1-joel@jms.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A situation has come up where there is a slave-only device for the slave
and a separate master device on the same bug. Allow a separate slave
device to be registered.
Signed-off-by: Corey Minyard <minyard@acm.org>
The AST2600 is already described in the bindings, but the driver never
gained a compatible string.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220221070351.121905-1-joel@jms.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The strlcpy should not be used because it doesn't limit the source
length. So that it will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, replace strlcpy with strscpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20211222032707.1912186-1-wangborong@cdjrlc.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
ident is not modified and can be made const to allow the compiler to put
it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Message-Id: <20211128220154.32927-1-rikard.falkeborn@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If the workqueue allocation fails, the driver is marked as not initialized,
and timer and panic_notifier will be left registered.
Instead of removing those when workqueue allocation fails, do the workqueue
initialization before doing it, and cleanup srcu_struct if it fails.
Fixes: 1d49eb91e8 ("ipmi: Move remove_work to dedicated workqueue")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-2-cascardo@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In case, init_srcu_struct fails (because of memory allocation failure), we
might proceed with the driver initialization despite srcu_struct not being
entirely initialized.
Fixes: 913a89f009 ("ipmi: Don't initialize anything in the core until something uses it")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-1-cascardo@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
During probe ssif_info->client is dereferenced in error path. However,
it is set when some of the error checking has already been done. This
causes following kernel crash if an error path is taken:
[ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present
[ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088
...
[ 30.657723][ T674] pc : __dev_printk+0x28/0xa0
[ 30.657732][ T674] lr : _dev_err+0x7c/0xa0
...
[ 30.657772][ T674] Call trace:
[ 30.657775][ T674] __dev_printk+0x28/0xa0
[ 30.657778][ T674] _dev_err+0x7c/0xa0
[ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e]
[ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0
...
Initialize ssif_info->client before any error path can be taken. Clear
i2c_client data in the error path to prevent the dangling pointer from
leaking.
Fixes: c4436c9149 ("ipmi_ssif: avoid registering duplicate ssif interface")
Cc: stable@vger.kernel.org # 5.4.x
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Message-Id: <20211208093239.4432-1-ykaukab@suse.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
More missed changes, the response back to another system sending a
command that had no user to handle it wasn't formatted properly.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A couple of issues:
The tested data sizes are wrong; during the design that changed and this
got missed.
The formatting of the reponse couldn't use the normal one, it has to be
an IPMB formatted response.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 059747c245 ("ipmi: Add support for IPMB direct messages")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
We're hitting OOB accesses in handle_ipmb_direct_rcv_rsp() (memcpy of
size -1) after user space generates a message. Looks like the message
is incorrectly assumed to be of the new IPMB type, because type is never
set and message is allocated with kmalloc() not kzalloc().
Fixes: 059747c245 ("ipmi: Add support for IPMB direct messages")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Message-Id: <20211124210323.1950976-1-kuba@kernel.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The sparse tool complains as follows:
drivers/char/ipmi/ipmi_msghandler.c:194:25: warning:
symbol 'remove_work_wq' was not declared. Should it be static?
This symbol is not used outside of ipmi_msghandler.c, so
marks it static.
Fixes: 1d49eb91e8 ("ipmi: Move remove_work to dedicated workqueue")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20211123083618.2366808-1-weiyongjun1@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Currently when removing an ipmi_user the removal is deferred as a work on
the system's workqueue. Although this guarantees the free operation will
occur in non atomic context, it can race with the ipmi_msghandler module
removal (see [1]) . In case a remove_user work is scheduled for removal
and shortly after ipmi_msghandler module is removed we can end up in a
situation where the module is removed fist and when the work is executed
the system crashes with :
BUG: unable to handle page fault for address: ffffffffc05c3450
PF: supervisor instruction fetch in kernel mode
PF: error_code(0x0010) - not-present page
because the pages of the module are gone. In cleanup_ipmi() there is no
easy way to detect if there are any pending works to flush them before
removing the module. This patch creates a separate workqueue and schedules
the remove_work works on it. When removing the module the workqueue is
drained when destroyed to avoid the race.
[1] https://bugs.launchpad.net/bugs/1950666
Cc: stable@vger.kernel.org # 5.1
Fixes: 3b9a907223 (ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier)
Signed-off-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Message-Id: <20211115131645.25116-1-ioanna-maria.alifieraki@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In the unlikely event where 'devm_kzalloc()' fails and 'kzalloc()'
succeeds, 'port' would be leaking.
Test each allocation separately to avoid the leak.
Fixes: 3a3d2f6a4c ("ipmi: kcs_bmc: Add serio adaptor")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <ecbfa15e94e64f4b878ecab1541ea46c74807670.1631048724.git.christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf, snprintf or sprintf makes more
sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Message-Id: <20211021110608.1060260-1-ye.guojin@zte.com.cn>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When CONFIG_I2C=m, CONFIG_I2C_SLAVE=y (bool), and CONFIG_IPMI_IPMB=y,
the build fails with:
ld: drivers/char/ipmi/ipmi_ipmb.o: in function `ipmi_ipmb_remove':
ipmi_ipmb.c:(.text+0x6b): undefined reference to `i2c_slave_unregister'
ld: drivers/char/ipmi/ipmi_ipmb.o: in function `ipmi_ipmb_thread':
ipmi_ipmb.c:(.text+0x2a4): undefined reference to `i2c_transfer'
ld: drivers/char/ipmi/ipmi_ipmb.o: in function `ipmi_ipmb_probe':
ipmi_ipmb.c:(.text+0x646): undefined reference to `i2c_slave_register'
ld: drivers/char/ipmi/ipmi_ipmb.o: in function `ipmi_ipmb_driver_init':
ipmi_ipmb.c:(.init.text+0xa): undefined reference to `i2c_register_driver'
ld: drivers/char/ipmi/ipmi_ipmb.o: in function `ipmi_ipmb_driver_exit':
ipmi_ipmb.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
This is due to having a tristate depending on a bool symbol.
By adding I2C (tristate) as a dependency, the desired dependencies
are met, causing IPMI_IPMB to be changed from =y to =m:
-CONFIG_IPMI_IPMB=y
+CONFIG_IPMI_IPMB=m
Fixes: 63c4eb3471 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20211012204416.23108-1-rdunlap@infradead.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Add direct OF support for fetching control parameters from the device
tree. Make it work like the device tree entries for the other IPMI
devices. Also add documentation for this.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The AST2600 has the same register set as the previous generation SoCs.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20210903015314.177987-1-joel@jms.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This driver was originally written to use the regmap abstraction with no
clear benefit. As the registers are always mmio and there is no sharing
of the region with other devices, we can safely read and write without
the locking that regmap provides.
This reduces the code size of the driver by about 25%.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210903051039.307991-1-joel@jms.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There is an off-by-one bounds check on the rcvlen causing a potential
out of bounds write on iidev->rcvmsg. Fix this by using the >= operator
on the bounds check rather than the > operator.
Addresses-Coverity: ("Out-of-bounds write")
Fixes: 0ba0c3c5d1c1 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20211005151611.305383-1-colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This provides access to the management controllers on an IPMB bus to a
device sitting on the IPMB bus. It also provides slave capability to
respond to received messages on the bus.
Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
An application has come up that has a device sitting right on the IPMB
that would like to communicate with the BMC on the IPMB using normal
IPMI commands.
Sending these commands and handling the responses is easy enough, no
modifications are needed to the IPMI infrastructure. But if this is an
application that also needs to receive IPMB commands and respond, some
way is needed to handle these incoming commands and send the responses.
Currently, the IPMI message handler only sends commands to the interface
and only receives responses from interface. This change extends the
interface to receive commands/responses and send commands/responses.
These are formatted differently in support of receiving/sending IPMB
messages directly.
Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
It will be needed by the upcoming ipmb direct addressing.
Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
Don't do kfree or other risky things when oops_in_progress is set.
It's easy enough to avoid doing them
Signed-off-by: Corey Minyard <cminyard@mvista.com>
You will get two decrements when the messages on a panic are sent, not
one, since commit 2033f68589 ("ipmi: Free receive messages when in an
oops") was added, but the watchdog code had a bug where it didn't set
the value properly.
Reported-by: Anton Lundin <glance@acc.umu.se>
Cc: <Stable@vger.kernel.org> # v5.4+
Fixes: 2033f68589 ("ipmi: Free receive messages when in an oops")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Nothing bug, but probably needs to go in.
-----BEGIN PGP SIGNATURE-----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=BmmZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.
Nothing big, but probably needs to go in"
* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
char: ipmi: use DEVICE_ATTR helper macro
ipmi: rate limit ipmi smi_event failure message
The caller of this function (parisc_driver_remove() in
arch/parisc/kernel/drivers.c) ignores the return value, so better don't
return any value at all to not wake wrong expectations in driver authors.
The only function that could return a non-zero value before was
ipmi_parisc_remove() which returns the return value of
ipmi_si_remove_by_dev(). Make this function return void, too, as for all
other callers the value is ignored, too.
Also fold in a small checkpatch fix for:
WARNING: Unnecessary space before function pointer arguments
+ void (*remove) (struct parisc_device *dev);
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> (for drivers/input)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Instead of open coding DEVICE_ATTR, use the helper macro
DEVICE_ATTR_RO to replace DEVICE_ATTR with 0444 octal
permissions.
This was detected as a part of checkpatch evaluation
investigating all reports of DEVICE_ATTR_RO warning
type.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Message-Id: <20210730062951.84876-1-dwaipayanray1@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Sometimes we can't get a valid si_sm_data, and we print an error
message accordingly. But the ipmi module seem to like retrying a lot,
in which case we flood the kernel log with a lot of messages, eg:
[46318019.164726] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318020.109700] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318021.158677] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318022.212598] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318023.258564] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318024.210455] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318025.260473] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318026.308445] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318027.356389] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318028.298288] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318029.363302] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Baoyou Xie <baoyou.xie@alibaba-inc.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Message-Id: <20210729093228.77098-1-wenyang@linux.alibaba.com>
[Added a missing comma]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The comparisons of the unsigned int hw_type to less than zero always
false because it is unsigned. Fix this by using an int for the
assignment and less than zero check.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 9d2df9a0ad80 ("ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20210616162913.15259-1-colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Some Aspeed KCS devices can derive the status register address from the
address of the data register. As such, the address of the status
register can be implicit in the configuration if desired. On the other
hand, sometimes address schemes might be requested that are incompatible
with the default addressing scheme. Allow these requests where possible
if the devicetree specifies the status register address.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Message-Id: <20210608104757.582199-17-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Input Buffer Full Interrupt Enable (IBFIE) is typoed as IBFIF for some
registers in the datasheet. Fix the driver to use the sensible acronym.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-16-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Apply the SerIRQ ID and level/sense behaviours from the devicetree if
provided.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-15-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
kcs_bmc_serio acts as a bridge between the KCS drivers in the IPMI
subsystem and the existing userspace interfaces available through the
serio subsystem. This is useful when userspace would like to make use of
the BMC KCS devices for purposes that aren't IPMI.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-12-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This way devices don't get delivered IRQs when no-one is interested.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-11-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Add a mechanism for controlling whether the client associated with a
KCS device will receive Input Buffer Full (IBF) and Output Buffer Empty
(OBE) events. This enables an abstract implementation of poll() for KCS
devices.
A wart in the implementation is that the ASPEED KCS devices don't
support an OBE interrupt for the BMC. Instead we pretend it has one by
polling the status register waiting for the Output Buffer Full (OBF) bit
to clear, and generating an event when OBE is observed.
Cc: CS20 KWLiu <KWLIU@nuvoton.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-10-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Now that we have untangled the data-structures, split the userspace
interface out into its own module. Userspace interfaces and drivers are
registered to the KCS BMC core to support arbitrary binding of either.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-9-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Move all client-private data out of `struct kcs_bmc` into the KCS client
implementation.
With this change the KCS BMC core code now only concerns itself with
abstract `struct kcs_bmc` and `struct kcs_bmc_client` types, achieving
expected separation of concerns. Further, the change clears the path for
implementation of alternative userspace interfaces.
The chardev data-structures are rearranged in the same manner applied to
the KCS device driver data-structures in an earlier patch - `struct
kcs_bmc_client` is embedded in the client's private data and we exploit
container_of() to translate as required.
Finally, now that it is free of client data, `struct kcs_bmc` is renamed
to `struct kcs_bmc_device` to contrast `struct kcs_bmc_client`.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-8-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Strengthen the distinction between code that abstracts the
implementation of the KCS behaviours (device drivers) and code that
exploits KCS behaviours (clients). Neither needs to know about the APIs
required by the other, so provide separate headers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-7-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Make the KCS device drivers responsible for allocating their own memory.
Until now the private data for the device driver was allocated internal
to the private data for the chardev interface. This coupling required
the slightly awkward API of passing through the struct size for the
driver private data to the chardev constructor, and then retrieving a
pointer to the driver private data from the allocated chardev memory.
In addition to being awkward, the arrangement prevents the
implementation of alternative userspace interfaces as the device driver
private data is not independent.
Peel a layer off the onion and turn the data-structures inside out by
exploiting container_of() and embedding `struct kcs_device` in the
driver private data.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-6-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Take steps towards defining a coherent API to separate the KCS device
drivers from the userspace interface. Decreasing the coupling will
improve the separation of concerns and enable the introduction of
alternative userspace interfaces.
For now, simply split the chardev logic out to a separate file. The code
continues to build into the same module.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-5-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Rename the functions in preparation for separating the IPMI chardev out
from the KCS BMC core.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-4-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Enable more efficient implementation of read-modify-write sequences.
Both device drivers for the KCS BMC stack use regmaps. The new callback
allows us to exploit regmap_update_bits().
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-3-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Unpack and remove the aspeed_kcs_probe_of_v[12]() functions to aid
rearranging how the private device-driver memory is allocated.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-2-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When an IPMI watchdog timer is being stopped in ipmi_close() or
ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to
WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called
to install this action. The latter function ends up invoking
__ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI
request.
For IPMI 1.0, this operation results in fully stopping the watchdog timer.
For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't
stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes
that the watchdog timer has its action correctly updated to 'none' but the
timer continues to run. A problem is that IPMI firmware can then still log
an expiration event when the configured timeout is reached, which is
unexpected because the watchdog timer was requested to be stopped.
The patch fixes this problem by not setting the "don't stop" flag in
__ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which
results in stopping the watchdog timer. This makes the behaviour for
IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in
__ipmi_heartbeat() which does not allow to reset the watchdog if the
current action is WDOG_TIMEOUT_NONE as that would start the timer.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Message-Id: <10a41bdc-9c99-089c-8d89-fa98ce5ea080@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Nothing major, no functional changes.
-----BEGIN PGP SIGNATURE-----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=/fjx
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.13-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A bunch of little cleanups
Nothing major, no functional changes"
* tag 'for-linus-5.13-1' of git://github.com/cminyard/linux-ipmi:
ipmi_si: Join string literals back
ipmi_si: Drop redundant check before calling put_device()
ipmi_si: Use strstrip() to remove surrounding spaces
ipmi_si: Get rid of ->addr_source_cleanup()
ipmi_si: Reuse si_to_str[] array in ipmi_hardcode_init_one()
ipmi_si: Introduce ipmi_panic_event_str[] array
ipmi_si: Use proper ACPI macros to check error code for failures
ipmi_si: Utilize temporary variable to hold device pointer
ipmi_si: Remove bogus err_free label
ipmi_si: Switch to use platform_get_mem_or_io()
ipmi: Handle device properties with software node API
ipmi:ssif: make ssif_i2c_send() void
ipmi: Refine retry conditions for getting device id
Add check against LPC device v2 compatible string to
ensure that the fixed device tree layout is adopted.
The LPC register offsets are also fixed accordingly.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210319062752.145730-3-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
For easy grepping on debug purposes join string literals back in
the messages.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-11-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
put_device() is NULL aware, drop redundant check before calling it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-10-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of home grown analogue, use strstrip() from the kernel library.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-9-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The ->addr_source_cleanup() callback is solely used by PCI driver
and only for one purpose, i.e. to disable device. Get rid of
->addr_source_cleanup() by switching to PCI managed API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-8-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of making the comparison one by one, reuse si_to_str[] array
in ipmi_hardcode_init_one() in conjunction with match_string() API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-7-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of repeating twice the constant literals, introduce
ipmi_panic_event_str[] array. It allows to simplify the code
with help of match_string() API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-6-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of direct comparison, use proper ACPI macros to check error code
for failures.
While at it, drop unneeded 'else' keyword.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-5-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Introduce a temporary variable to hold a device pointer.
It can be utilized in the ->probe() and save a bit of LOCs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-4-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There is no more 'free' in the error path, so drop the label and
return errors inline.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-3-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Switch to use new platform_get_mem_or_io() instead of home grown analogue.
Note, we also introduce ipmi_set_addr_data_and_space() helper here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-2-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The old device property API is going to be removed.
Replacing the device_add_properties() call with the software
node API equivalent, device_create_managed_software_node().
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Message-Id: <20210304090312.26827-1-heikki.krogerus@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This function actually needs no return value. So remove the unneeded
check and make it void.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Message-Id: <20210301140515.18951-1-zhangliguang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Rarely but still failures are observed while getting BMC device ID
so this commit changes the condition to retry to get device id
when cc is not IPMI_CC_NO_ERROR.
Signed-off-by: Terry Duncan <terry.s.duncan@intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Message-Id: <20210225045027.9344-1-jae.hyun.yoo@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
