SM8650 based on the diffstat. Otherwise this is a collection of non-critical
fixes and cleanups to various clk drivers and their DT bindings. Nothing is
changed in the core clk framework this time, although there's a patch to fix a
basic clk type initialization function. In general, this pile looks to be on
the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling separate
memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and
QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers
-----BEGIN PGP SIGNATURE-----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=t0CI
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
In the reference manual under "2.8.6 NIU Clock gating reliance"
it is stated that pclk_usb_niu has a dependency on hclk_usb_niu.
While the manual does not state that this is a bi-directional
relationship it was noted that the sdmmc2 failed to operate for me in
mmc mode if the pclk_usb was not marked as critical. The parent clock
of the hclk_sdmmc2 is hclk_usb.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231204185719.569021-8-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for a PLL rate of 126.4MHz so that the Powkiddy X55 panel
can run at a requested 60hz.
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231204185719.569021-9-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for a PLL rate of 292.5MHz so that the Powkiddy RGB30 panel
can run at a requested 60hz (59.96, close enough).
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for a PLL rate of 115.2MHz so that the Powkiddy RK2023 panel
can run at a requested 60hz (59.99, close enough).
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018161848.346947-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
PLL rate on RK356x is calculated through the simple formula:
((24000000 / _refdiv) * _fbdiv) / (_postdiv1 * _postdiv2)
The PLL rate setting for 78.75MHz seems to be copied from 96MHz
so this patch fixes it and configures it properly.
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Fixes: 842f4cb726 ("clk: rockchip: Add more PLL rates for rk3568")
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230614134750.1056293-1-a1ba.omarov@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds PLL setting for not so common resolution as 1920x720-50.00,
which can be set using 2500 horizontal signals and 808 vertical.
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230614134716.1055862-1-a1ba.omarov@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Whenever pclk_vo is enabled hclk_vo must be enabled as well. This is
described in the Reference Manual as:
| 2.8.6 NIU Clock gating reliance
|
| A part of niu clocks have a dependence on another niu clock in order to
| sharing the internal bus. When these clocks are in use, another niu
| clock must be opened, and cannot be gated. These clocks and the special
| clock on which they are relied are as following:
|
| Clocks which have dependency The clock which can not be gated
| -----------------------------------------------------------------
| ...
| pclk_vo_niu, hclk_vo_s_niu hclk_vo_niu
| ...
The clock framework doesn't offer a way to enable clock B whenever clock A is
enabled, at least not when B is not an ancestor of A. Workaround this by
marking hclk_vo as critical so it is never disabled. This is suboptimal in
terms of power consumption, but a stop gap solution until the clock framework
has a way to deal with this.
We have this clock tree:
| aclk_vo 2 2 0 300000000 0 0 50000 Y
| aclk_hdcp 0 0 0 300000000 0 0 50000 N
| pclk_vo 2 3 0 75000000 0 0 50000 Y
| pclk_edp_ctrl 0 0 0 75000000 0 0 50000 N
| pclk_dsitx_1 0 0 0 75000000 0 0 50000 N
| pclk_dsitx_0 1 2 0 75000000 0 0 50000 Y
| pclk_hdmi_host 1 2 0 75000000 0 0 50000 Y
| pclk_hdcp 0 0 0 75000000 0 0 50000 N
| hclk_vo 2 5 0 150000000 0 0 50000 Y
| hclk_hdcp 0 0 0 150000000 0 0 50000 N
| hclk_vop 0 2 0 150000000 0 0 50000 N
Without this patch the edp, dsitx, hdmi and hdcp driver would enable their
clocks which then enables pclk_vo, but hclk_vo stays disabled and register
accesses just hang. hclk_vo is enabled by the VOP2 driver, so reproducibility
of this issue depends on the probe order.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220422072841.2206452-2-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On the rk3568 we have this (simplified) situation:
.--------. .-----. .---------.
-| hpll |--.--| /n |----|dclk_vop0|-
`--------´ | `-----´ `---------´
| .-----. .---------.
`--| /m |----|dclk_vop1|-
| `-----´ `---------´
| .---------.
`-------------|hdmi_ref |-
`---------´
For the HDMI to work the HDMI reference clock needs to be the same as the
pixel clock which means the dividers have be set to one. The last patch removed
the CLK_SET_RATE_PARENT flag from the pixel clocks which means the hpll is not
changed on pixel clock changes. In order to allow the HDMI controller to
set a suitable PLL rate we now add the CLK_SET_RATE_PARENT flag to the
HDMI reference clock. With this the flow becomes:
1) HDMI controller driver sets the rate to its pixel clock which means
hpll is set to the pixel clock
2) VOP2 driver sets dclk_vop[012] to the pixel clock. As this can't change
the hpll clock anymore this means only the divider is adjusted to the
desired value of dividing by one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220126145549.617165-26-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
cpll. gpll and cpll also drive many other clocks, so changing the
dclk_vop[012] clocks could change these other clocks as well. Drop
CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
only adjust the pixel clocks with the divider between the PLL and the
dclk_vop[012] which means the user may have to adjust the PLL clock to a
suitable rate using the assigned-clock-rate device tree property.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220126145549.617165-25-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds a few more PLL settings needed for some standard resolutions:
297MHz 3840x2160-30.00
241.5MHz 2560x1440-59.95
135MHz 1280x1024-75.02
119MHz 1680x1050-59.88
108MHz 1280x1024-60.02
78.75MHz 1024x768-75.03
Changes since v3:
- new patch
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220126145549.617165-12-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Both of these drivers were converted to real drivers and got a tristate
build option. But them being builtin_platform_drivers, they only ever
should be build-in - as the name suggests.
So adapt the Kconfig symbol and drop the MODULE_* parts from the drivers.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211027132616.1039814-3-heiko@sntech.de
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This reverts commit 1da80da028.
Reading recent discussions [0] [1], I realized this change introduces
a number of problems:
- only converting to module_platform_driver creates the issue
with the existing __init and __initdata attributes.
When the driver would've been built as a module, all the missing
clock-definitions (all are initdata) should've turned up as error
in testing suggesting that the change wasn't at all
- a clock driver is a very core component of soc bringup and making
this able to be built as a module solely for enabling the soc vendor
to add out of tree changes for Android implementations is not in our
interest and also everything except a ramdisk won't probe without a
clock controller.
This is especially true when the changes aren't really tested and
are merely added to move the mainline driver "out of the way".
[0] https://lwn.net/Articles/872209/
[1] https://lore.kernel.org/all/163529604399.15791.378104318036812951@swboyd.mtv.corp.google.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211027132616.1039814-2-heiko@sntech.de
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Replace builtin_platform_driver_probe with module_platform_driver_probe
because that rk3399 and rk3568 can be built as kernel modules.
Fixes: 70d839e276 ("clk: rockchip: rk3399: Support module build")
Fixes: cf911d89c4 ("clk: rockchip: add clock controller for rk3568")
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210904152856.31946-1-miles.chen@mediatek.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The cpll clk gate bits had an ordering issue. This led to the loss of
the boot sdmmc controller when the gmac was shut down with:
`ip link set eth0 down`
as the cpll_100m was shut off instead of the cpll_62p5.
cpll_62p5, cpll_50m, cpll_25m were all off by one with cpll_100m
misplaced.
Fixes: cf911d89c4 ("clk: rockchip: add clock controller for rk3568")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Elaine Zhang<zhangqing@rock-chips.com>
Link: https://lore.kernel.org/r/20210519174149.3691335-1-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the clock tree definition for the new rk3568 SoC.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210315085608.16010-5-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
