mirror of
git://git.yoctoproject.org/linux-yocto.git
synced 2025-08-22 00:42:01 +02:00
master
1478 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Chen Ridong
|
93d1f41a82 |
drm/vmwgfx: avoid null_ptr_deref in vmw_framebuffer_surface_create_handle
The 'vmw_user_object_buffer' function may return NULL with incorrect
inputs. To avoid possible null pointer dereference, add a check whether
the 'bo' is NULL in the vmw_framebuffer_surface_create_handle.
Fixes:
|
||
|
Thorsten Blum
|
f07fd958a4 |
drm/vmwgfx: Remove unnecessary NULL checks before kvfree()
Since kvfree() already checks if its argument is NULL, an additional check before calling kvfree() is unnecessary and can be removed. Remove both and the following Coccinelle/coccicheck warnings reported by ifnullfree.cocci: WARNING: NULL check before some freeing functions is not needed WARNING: NULL check before some freeing functions is not needed Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241007115131.1811-3-thorsten.blum@linux.dev |
||
|
Nikolay Kuratov
|
26498b8d54 |
drm/vmwgfx: Handle surface check failure correctly
Currently if condition (!bo and !vmw_kms_srf_ok()) was met
we go to err_out with ret == 0.
err_out dereferences vfb if ret == 0, but in our case vfb is still NULL.
Fix this by assigning sensible error to ret.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Zack Rusin
|
512a9721ca |
drm/vmwgfx: Cleanup kms setup without 3d
Do not validate format equality for the non 3d cases to allow xrgb to
argb copies and make sure the dx binding flags are only used
on dx compatible surfaces.
Fixes basic 2d kms setup on configurations without 3d. There's little
practical benefit to it because kms framebuffer coherence is disabled
on configurations without 3d but with those changes the code actually
makes sense.
v2: Remove the now unused format variable
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Ian Forbes
|
4809a017a2 |
drm/vmwgfx: Handle possible ENOMEM in vmw_stdu_connector_atomic_check
Handle unlikely ENOMEN condition and other errors in
vmw_stdu_connector_atomic_check.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes:
|
||
|
Ian Forbes
|
28a5dfd4f6 |
drm/vmwgfx: Limit display layout ioctl array size to VMWGFX_NUM_DISPLAY_UNITS
Currently the array size is only limited by the largest kmalloc size which is incorrect. This change will also return a more specific error message than ENOMEM to userspace. Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240808200634.1074083-1-ian.forbes@broadcom.com |
||
|
Linus Torvalds
|
8f72c31f45 |
vfs-6.12.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEGwAKCRCRxhvAZXjc
ojIuAQC433+hBkvjvmQ7H0r5rgZSjUuCTG3bSmdU7RJmPHUHhwEA85v/NGq53f+W
IhandK6t+Cf0JYpFZ3N0bT88hDYVhQQ=
=9zGL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
||
|
Christian Brauner
|
641bb4394f |
fs: move FMODE_UNSIGNED_OFFSET to fop_flags
This is another flag that is statically set and doesn't need to use up
an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit.
(1) mem_open() used from proc_mem_operations
(2) adi_open() used from adi_fops
(3) drm_open_helper():
(3.1) accel_open() used from DRM_ACCEL_FOPS
(3.2) drm_open() used from
(3.2.1) amdgpu_driver_kms_fops
(3.2.2) psb_gem_fops
(3.2.3) i915_driver_fops
(3.2.4) nouveau_driver_fops
(3.2.5) panthor_drm_driver_fops
(3.2.6) radeon_driver_kms_fops
(3.2.7) tegra_drm_fops
(3.2.8) vmwgfx_driver_fops
(3.2.9) xe_driver_fops
(3.2.10) DRM_GEM_FOPS
(3.2.11) DEFINE_DRM_GEM_DMA_FOPS
(4) struct memdev sets fmode flags based on type of device opened. For
devices using struct mem_fops unsigned offset is used.
Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts
into the open helper to ensure that the flag is always set.
Link: https://lore.kernel.org/r/20240809-work-fop_unsigned-v1-1-658e054d893e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
Zack Rusin
|
e9fd436bb8 |
drm/vmwgfx: Disable coherent dumb buffers without 3d
Coherent surfaces make only sense if the host renders to them using
accelerated apis. Without 3d the entire content of dumb buffers stays
in the guest making all of the extra work they're doing to synchronize
between guest and host useless.
Configurations without 3d also tend to run with very low graphics
memory limits. The pinned console fb, mob cursors and graphical login
manager tend to run out of 16MB graphics memory that those guests use.
Fix it by making sure the coherent dumb buffers are only used on
configs with 3d enabled.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Zack Rusin
|
50f1199250 |
drm/vmwgfx: Fix prime with external buffers
Make sure that for external buffers mapping goes through the dma_buf
interface instead of trying to access pages directly.
External buffers might not provide direct access to readable/writable
pages so to make sure the bo's created from external dma_bufs can be
read dma_buf interface has to be used.
Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't
trigger this due to the fact that virtual machines will not have
multiple GPUs but it enables better test coverage in IGT.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Zack Rusin
|
aba07b9a05 |
drm/vmwgfx: Prevent unmapping active read buffers
The kms paths keep a persistent map active to read and compare the cursor
buffer. These maps can race with each other in simple scenario where:
a) buffer "a" mapped for update
b) buffer "a" mapped for compare
c) do the compare
d) unmap "a" for compare
e) update the cursor
f) unmap "a" for update
At step "e" the buffer has been unmapped and the read contents is bogus.
Prevent unmapping of active read buffers by simply keeping a count of
how many paths have currently active maps and unmap only when the count
reaches 0.
Fixes:
|
||
|
Maxime Ripard
|
a1ff5a7d78
|
Merge drm/drm-fixes into drm-misc-fixes
Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Ian Forbes
|
75c3e8a26a |
drm/vmwgfx: Trigger a modeset when the screen moves
When multi-monitor is cycled the X,Y position of the Screen Target will
likely change but the resolution will not. We need to trigger a modeset
when this occurs in order to recreate the Screen Target with the correct
X,Y position.
Fixes a bug where multiple displays are shown in a single scrollable
host window rather than in 2+ windows on separate host displays.
Fixes:
|
||
|
Ian Forbes
|
cb372a505a |
drm/vmwgfx: Fix overlay when using Screen Targets
This code was never updated to support Screen Targets.
Fixes a bug where Xv playback displays a green screen instead of actual
video contents when 3D acceleration is disabled in the guest.
Fixes:
|
||
|
Zack Rusin
|
12bed149a3 |
drm/vmwgfx: Add basic support for external buffers
Make vmwgfx go through the dma-buf interface to map/unmap imported buffers. The driver used to try to directly manipulate external buffers, assuming that everything that was coming to it had to live in cpu accessible memory. While technically true because what's in the vms is controlled by us, it's semantically completely broken. Fix importing of external buffers by forwarding all memory access requests to the importer. Tested by the vmw_prime basic_vgem test. Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-5-zack.rusin@broadcom.com |
||
|
Zack Rusin
|
d6667f0ddf |
drm/vmwgfx: Fix handling of dumb buffers
Dumb buffers can be used in kms but also through prime with gallium's
resource_from_handle. In the second case the dumb buffers can be
rendered by the GPU where with the regular DRM kms interfaces they
are mapped and written to by the CPU. Because the same buffer can
be written to by the GPU and CPU vmwgfx needs to use vmw_surface (object
which properly tracks dirty state of the guest and gpu memory)
instead of vmw_bo (which is just guest side memory).
Furthermore the dumb buffer handles are expected to be gem objects by
a lot of userspace.
Make vmwgfx accept gem handles in prime and kms but internally switch
to vmw_surface's to properly track the dirty state of the objects between
the GPU and CPU.
Fixes new kwin and kde on wayland.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Zack Rusin
|
09f34a0027 |
drm/vmwgfx: Make sure the screen surface is ref counted
Fix races issues in virtual crc generation by making sure the surface
the code uses for crc computation is properly ref counted.
Crc generation was trying to be too clever by allowing the surfaces
to go in and out of scope, with the hope of always having some kind
of screen present. That's not always the code, in particular during
atomic disable, so to make sure the surface, when present, is not
being actively destroyed at the same time, hold a reference to it.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Zack Rusin
|
e583371007 |
drm/vmwgfx: Fix a deadlock in dma buf fence polling
Introduce a version of the fence ops that on release doesn't remove
the fence from the pending list, and thus doesn't require a lock to
fix poll->fence wait->fence unref deadlocks.
vmwgfx overwrites the wait callback to iterate over the list of all
fences and update their status, to do that it holds a lock to prevent
the list modifcations from other threads. The fence destroy callback
both deletes the fence and removes it from the list of pending
fences, for which it holds a lock.
dma buf polling cb unrefs a fence after it's been signaled: so the poll
calls the wait, which signals the fences, which are being destroyed.
The destruction tries to acquire the lock on the pending fences list
which it can never get because it's held by the wait from which it
was called.
Old bug, but not a lot of userspace apps were using dma-buf polling
interfaces. Fix those, in particular this fixes KDE stalls/deadlock.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Linus Torvalds
|
b3ce7a3084 |
drm next for 6.11-rc1:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----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=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
|
||
|
Daniel Vetter
|
86634fa4e6 |
Linux 6.10-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaB0NweHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkvwH/36UJRk/o6wvXnyH E6QjCSWo2226APyWks22NjtC3I/8Iqdvkneuh6wG0qL2sXAB078EMjUq5R81bF8H wWFBJwetjYTp8GEyLioMEb2wCH/J3R29dLFC4UYTplafXRGP6//xcpJaKmTxcgdR 31IzvTPXbApZ7L3k1U6rA2bK9PNKcFCOvZlrNMUCuwMrabymHsDfOUt1DqXyg2xp zjqiWYBwlklozmgawSWt/mdEgkWuTcAbg+KyqDVQF59s9aj/OOwZ0j+HACq5V8CM quTPIAYL6CC9p7uxa69lGr/sgC0Is/BZLPX7RTZAwCgarGvnX+1HUsjDcaFCtrVg O6fPUV8= =pgUx -----END PGP SIGNATURE----- Merge v6.10-rc6 into drm-next The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
|
Alexey Makhalov
|
90328eaaff |
drm/vmwgfx: Use VMware hypercall API
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API. Eliminate arch specific code. drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant of vmware_hypercall. And keep it here until introduction of ARM64 VMWare hypervisor interface. Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240613191650.9913-5-alexey.makhalov@broadcom.com |
||
|
Dave Airlie
|
f680df51ca |
drm-misc-next for 6.11:
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZlhUKAAKCRAnX84Zoj2+
dgHoAYDTpShgXFXnlnMtqZr+ZuShcjcwiqzwM4qNWdtyji9MONtJJU3ZQnGlnXbI
ZU+oZP0Bf0PyT0/8bf+rmZBJ1UdAxt2IQaLkP1tTHOad4E+KlcL5n1opzMi160mB
EZSm9f7aNw==
=bZPt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-05-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat
|
||
|
Alexey Makhalov
|
8c4d6945fe |
drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
VMWARE_HYPERCALL alternative will not work as intended without VMware guest code
initialization.
[ bp: note that this doesn't reproduce with newer gccs so it must be
something gcc-9-specific. ]
Closes: https://lore.kernel.org/oe-kbuild-all/202406152104.FxakP1MB-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240616012511.198243-1-alexey.makhalov@broadcom.com
|
||
|
Ian Forbes
|
5703fc058e |
drm/vmwgfx: Don't memcmp equivalent pointers
These pointers are frequently the same and memcmp does not compare the
pointers before comparing their contents so this was wasting cycles
comparing 16 KiB of memory which will always be equal.
Fixes:
|
||
|
Dr. David Alan Gilbert
|
b91e05f1fc |
drm/vmwgfx: remove unused struct 'vmw_stdu_dma'
'vmw_stdu_dma' is unused since
commit
|
||
|
Ian Forbes
|
7ef91dcba1 |
drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive
drm_crtc_helper_funcs::atomic_disable can be called even when the CRTC is
still enabled. This can occur when the mode changes or the CRTC is set as
inactive.
In the case where the CRTC is being set as inactive we only want to
blank the screen. The Screen Target should remain intact as long as the
mode has not changed and CRTC is enabled.
This fixes a bug with GDM where locking the screen results in a permanent
black screen because the Screen Target is no longer defined.
Fixes:
|
||
|
Ian Forbes
|
a54a200f3d |
drm/vmwgfx: Standardize use of kibibytes when logging
Use the same standard abbreviation KiB instead of incorrect variants. Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-5-ian.forbes@broadcom.com |
||
|
Ian Forbes
|
dde1de06bd |
drm/vmwgfx: Remove STDU logic from generic mode_valid function
STDU has its own mode_valid function now so this logic can be removed from
the generic version.
Fixes:
|
||
|
Ian Forbes
|
fb5e19d2dd |
drm/vmwgfx: 3D disabled should not effect STDU memory limits
This limit became a hard cap starting with the change referenced below.
Surface creation on the device will fail if the requested size is larger
than this limit so altering the value arbitrarily will expose modes that
are too large for the device's hard limits.
Fixes:
|
||
|
Ian Forbes
|
4268269331 |
drm/vmwgfx: Filter modes which exceed graphics memory
SVGA requires individual surfaces to fit within graphics memory
(max_mob_pages) which means that modes with a final buffer size that would
exceed graphics memory must be pruned otherwise creation will fail.
Additionally llvmpipe requires its buffer height and width to be a multiple
of its tile size which is 64. As a result we have to anticipate that
llvmpipe will round up the mode size passed to it by the compositor when
it creates buffers and filter modes where this rounding exceeds graphics
memory.
This fixes an issue where VMs with low graphics memory (< 64MiB) configured
with high resolution mode boot to a black screen because surface creation
fails.
Fixes:
|
||
|
Maxime Ripard
|
375c4d1583
|
Merge drm/drm-next into drm-misc-next
Let's start the new release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
|
Linus Torvalds
|
db5d28c0bf |
drm for 6.10-rc1
new drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmZEUU0ACgkQDHTzWXnE hr5qMBAAjUFF0w3YOQMsn0LEAm628kMRHpoVeSXmIfO9z9lTyad30EtiS4ggFgj7 Q/oQ6hHCd5jdsvGSJDgtTTAsTQX+aCkXrgf/18ENbqR5mM3MdefUAPR/zawZ7HR4 8+b2h6p7gHBw8wDjuIvQ5e9InHcnIkKWJc82qnJG5Urgxa05SDh3mu3cosPTJiBw a851vlWaYcxC0yAUwJlWaXDdN8yzdFaSQNboZBS/CMLXF/WE6Ht257uxJmaouc0Y Z0kBybok5x0TPQEXF9IV+kuSW3EYpYcwRi0BFFM9sJjkEBdH3rYRZwuYP1LR+7VZ HKsmIkie8YzCm2VwTquYzUvHgF+swZX4RRch9XJlGz7UvBLc0eBO/2n4X6fNd8Kl QGNNqEfsnUQrAHKvGsOUgoGjSCmEo8voGcMZ3JPIAdJ/GcnJwpMvNxtF6XB08hEu rDxuU6o7WkM4dJbtiaFEHNh0Fmjj6aXdBL23UD9pcqPT1fc9cT3xnUd5RJIRuRwV /tpb2WfkFAoxCkKFiunaC4rE8oG6ME6wr/trYjvoYuhCI5hCVaXRBGzJEtC30IP6 lG2YZ8r0jHjktbgjZ0Cz/hY424H4sxSN9SJAnXXFDzcfjBJ/nOgo5nMD1jKajAD5 SYfqWaD5Y+YygtyLJPMfZQI2XMOpCzteXD8uaNXXFJfpV7Apeyg= =ocVM -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ... |
||
|
Thomas Zimmermann
|
aae4682e5d |
drm/fbdev-generic: Convert to fbdev-ttm
Only TTM-based drivers use fbdev-generic. Rename it to fbdev-ttm and change the symbol infix from _generic_ to _ttm_. Link the source file into TTM helpers, so that it is only build if TTM-based drivers have been selected. Select DRM_TTM_HELPER for loongson. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-43-tzimmermann@suse.de |
||
|
Jiapeng Chong
|
13d56abef1 |
drm/vmwgfx: Remove duplicate vmwgfx_vkms.h header
./drivers/gpu/drm/vmwgfx/vmwgfx_vkms.c: vmwgfx_vkms.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8772 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417012917.66046-1-jiapeng.chong@linux.alibaba.com |
||
|
Zack Rusin
|
a37ef7613c |
drm/vmwgfx: Fix invalid reads in fence signaled events
Correctly set the length of the drm_event to the size of the structure
that's actually used.
The length of the drm_event was set to the parent structure instead of
to the drm_vmw_event_fence which is supposed to be read. drm_read
uses the length parameter to copy the event to the user space thus
resuling in oob reads.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Kent Overstreet
|
0069455bcb |
fix missing vmalloc.h includes
Patch series "Memory allocation profiling", v6.
Overview:
Low overhead [1] per-callsite memory allocation profiling. Not just for
debug kernels, overhead low enough to be deployed in production.
Example output:
root@moria-kvm:~# sort -rn /proc/allocinfo
127664128 31168 mm/page_ext.c:270 func:alloc_page_ext
56373248 4737 mm/slub.c:2259 func:alloc_slab_page
14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded
14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash
13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio
9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node
4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable
4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start
3940352 962 mm/memory.c:4214 func:alloc_anon_folio
2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node
...
Usage:
kconfig options:
- CONFIG_MEM_ALLOC_PROFILING
- CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
- CONFIG_MEM_ALLOC_PROFILING_DEBUG
adds warnings for allocations that weren't accounted because of a
missing annotation
sysctl:
/proc/sys/vm/mem_profiling
Runtime info:
/proc/allocinfo
Notes:
[1]: Overhead
To measure the overhead we are comparing the following configurations:
(1) Baseline with CONFIG_MEMCG_KMEM=n
(2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n)
(3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y)
(4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1)
(5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT
(6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y
(7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y
Performance overhead:
To evaluate performance we implemented an in-kernel test executing
multiple get_free_page/free_page and kmalloc/kfree calls with allocation
sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU
affinity set to a specific CPU to minimize the noise. Below are results
from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on
56 core Intel Xeon:
kmalloc pgalloc
(1 baseline) 6.764s 16.902s
(2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%)
(3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%)
(4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%)
(5 memcg) 13.388s (+97.94%) 48.460s (+186.71%)
(6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%)
(7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%)
Memory overhead:
Kernel size:
text data bss dec diff
(1) 26515311 18890222 17018880 62424413
(2) 26524728 19423818 16740352 62688898 264485
(3) 26524724 19423818 16740352 62688894 264481
(4) 26524728 19423818 16740352 62688898 264485
(5) 26541782 18964374 16957440 62463596 39183
Memory consumption on a 56 core Intel CPU with 125GB of memory:
Code tags: 192 kB
PageExts: 262144 kB (256MB)
SlabExts: 9876 kB (9.6MB)
PcpuExts: 512 kB (0.5MB)
Total overhead is 0.2% of total memory.
Benchmarks:
Hackbench tests run 100 times:
hackbench -s 512 -l 200 -g 15 -f 25 -P
baseline disabled profiling enabled profiling
avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023)
stdev 0.0137 0.0188 0.0077
hackbench -l 10000
baseline disabled profiling enabled profiling
avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859)
stdev 0.0933 0.0286 0.0489
stress-ng tests:
stress-ng --class memory --seq 4 -t 60
stress-ng --class cpu --seq 4 -t 60
Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/
[2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/
This patch (of 37):
The next patch drops vmalloc.h from a system header in order to fix a
circular dependency; this adds it to all the files that were pulling it in
implicitly.
[kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c]
Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev
[surenb@google.com: fix arch/x86/mm/numa_32.c]
Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com
[kent.overstreet@linux.dev: a few places were depending on sizes.h]
Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev
[arnd@arndb.de: fix mm/kasan/hw_tags.c]
Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org
[surenb@google.com: fix arc build]
Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Ian Forbes
|
782e5e7925 |
drm/vmwgfx: Fix Legacy Display Unit
Legacy DU was broken by the referenced fixes commit because the placement and the busy_placement no longer pointed to the same object. This was later fixed indirectly by commit |
||
|
Jani Nikula
|
33d5ae6cac |
drm/print: drop include debugfs.h and include where needed
Surprisingly many places depend on debugfs.h to be included via drm_print.h. Fix them. v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe v2: Also fix ivpu and vmwgfx Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Dave Airlie
|
0208ca55aa |
Linux 6.9-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYlapoeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGJLgH/RFrsXefpxAWACJv wRmIx/YFjI3Z4nypBZPXysX/JOuf/cf4bR22jMHC1vhQDtxVgB7eUpEYx0C0Y5RD ll7cunAZCpP+PB725/bOWbaF94eigl8xC4RrKPon4tG1CS9NAvCJFDyNgWpqh48s sSKKae68a16zMtIX5Za8nvmsBQOeD67ZFBgI4m7wIDDhTXY3XlG84r8Rz/ZwcdE/ rExFkDMUqjpoJVAMBtETQNk4pvKZVMrW2B0f/xZSR+IKXw5l2FO0raXkIG/6TERs CxJvCuUjKIosqFLIK2O/cU9G+5V2axZ/WD8YRwDr2vlnnOPht+dFQzyPcuSqezbG ShIhQo8= =GI5F -----END PGP SIGNATURE----- Backmerge tag 'v6.9-rc5' into drm-next Linux 6.9-rc5 I've had a persistent msm failure on clang, and the fix is in fixes so just pull it back to fix that. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
Zack Rusin
|
7b0062036c |
drm/vmwgfx: Implement virtual crc generation
crc checksums are used to validate the output. Normally they're part of the actual display hardware but on virtual stack there's nothing to automatically generate them. Implement crc generation for the vmwgfx stack. This works only on screen targets, where it's possibly to easily make sure that the guest side contents of the surface matches the host sides output. Just like the vblank support, crc generation can only be enabled via: guestinfo.vmwgfx.vkms_enable = "TRUE" option in the vmx file. Makes IGT's kms_pipe_crc_basic pass and allows a huge number of other IGT tests which require CRC generation of the output to actually run on vmwgfx. Makes it possible to actually validate a lof of the kms and drm functionality with vmwgfx. Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Acked-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-3-zack.rusin@broadcom.com |
||
|
Zack Rusin
|
cd2eb57df1 |
drm/vmwgfx: Implement virtual kms
By default vmwgfx doesn't support vblanking or crc generation which makes it impossible to use various IGT tests to validate vmwgfx. Implement virtual kernel mode setting, which is mainly related to simulated vblank support. Code is very similar to amd's vkms and the vkms module itself, except that it's integrated with vmwgfx three different output technologies - legacy, screen object and screen targets. Make IGT's kms_vblank pass on vmwgfx and allows a lot of other IGT tests to run with vmwgfx. Support for vkms needs to be manually enabled by adding: guestinfo.vmwgfx.vkms_enable = "TRUE" somewhere in the vmx file, otherwise it's off by default. Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Acked-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-2-zack.rusin@broadcom.com |
||
|
Zack Rusin
|
d4c972bff3 |
drm/vmwgfx: Sort primary plane formats by order of preference
The table of primary plane formats wasn't sorted at all, leading to
applications picking our least desirable formats by defaults.
Sort the primary plane formats according to our order of preference.
Nice side-effect of this change is that it makes IGT's kms_atomic
plane-invalid-params pass because the test picks the first format
which for vmwgfx was DRM_FORMAT_XRGB1555 and uses fb's with odd sizes
which make Pixman, which IGT depends on assert due to the fact that our
16bpp formats aren't 32 bit aligned like Pixman requires all formats
to be.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Zack Rusin
|
a60ccade88 |
drm/vmwgfx: Fix crtc's atomic check conditional
The conditional was supposed to prevent enabling of a crtc state
without a set primary plane. Accidently it also prevented disabling
crtc state with a set primary plane. Neither is correct.
Fix the conditional and just driver-warn when a crtc state has been
enabled without a primary plane which will help debug broken userspace.
Fixes IGT's kms_atomic_interruptible and kms_atomic_transition tests.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Zack Rusin
|
b32233acce |
drm/vmwgfx: Fix prime import/export
vmwgfx never supported prime import of external buffers. Furthermore the
driver exposes two different objects to userspace: vmw_surface's and
gem buffers but prime import/export only worked with vmw_surfaces.
Because gem buffers are used through the dumb_buffer interface this meant
that the driver created buffers couldn't have been prime exported or
imported.
Fix prime import/export. Makes IGT's kms_prime pass.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes:
|
||
|
Zack Rusin
|
4c08f01934 |
drm/vmwgfx: Enable DMA mappings with SEV
Enable DMA mappings in vmwgfx after TTM has been fixed in commit |
||
|
Thomas Zimmermann
|
0d21364c6e |
Merge drm/drm-next into drm-misc-next
Backmerging to get v6.9-rc2 changes into drm-misc-next. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Ian Forbes
|
0716e348d1 |
drm/vmwgfx: Remove unused code
Remove unused structs, members, and file. Many of these are written but never read. Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214210440.26167-1-ian.forbes@broadcom.com |
||
|
Jocelyn Falempe
|
4be9075fec |
drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the
corresponding ttm_resource_manager is not allocated.
This leads to a crash when trying to read from this file.
Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file
only when the corresponding ttm_resource_manager is allocated.
crash> bt
PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep"
#0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3
#1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a
#2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1
#3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1
#4 [ffffb954506b3c70] no_context at ffffffffb2a7e913
#5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c
#6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887
#7 [ffffb954506b3d40] page_fault at ffffffffb360116e
[exception RIP: ttm_resource_manager_debug+0x11]
RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246
RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940
RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000
RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000
R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff
R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm]
#9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3
RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985
RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003
RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000
R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003
ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes:
|
||
|
Thomas Zimmermann
|
a780278472 |
drm/gem: Acquire reservation lock in drm_gem_{pin/unpin}()
Acquire the buffer object's reservation lock in drm_gem_pin() and remove locking the drivers' GEM callbacks where necessary. Same for unpin(). DRM drivers and memory managers modified by this patch will now have correct dma-buf locking semantics: the caller is responsible for holding the reservation lock when calling the pin or unpin callback. DRM drivers and memory managers that are not modified will now be protected against concurent invocation of their pin and unpin callbacks. PRIME does not implement struct dma_buf_ops.pin, which requires the caller to hold the reservation lock. It does implement struct dma_buf_ops.attach, which requires to callee to acquire the reservation lock. The PRIME code uses drm_gem_pin(), so locks are now taken as specified. Same for unpin and detach. The patch harmonizes GEM pin and unpin to have non-interruptible reservation locking across all drivers, as is already the case for vmap and vunmap. This affects gem-shmem, gem-vram, loongson, qxl and radeon. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # virtio-gpu Link: https://patchwork.freedesktop.org/patch/msgid/20240227113853.8464-10-tzimmermann@suse.de |