In the ad7124_write_raw() function, parameter val can potentially
be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST()
is called within ad7124_set_channel_odr(). The ad7124_write_raw()
function is invoked through the sequence: iio_write_channel_raw() ->
iio_write_channel_attribute() -> iio_channel_write(), with no checks
in place to ensure val is non-zero.
Cc: stable@vger.kernel.org
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241022134330.574601-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ad7380-4 is the only device in the family that does not have an internal
reference. It uses "refin" as a required external reference.
All other devices in the family use "refio"" as an optional external
reference.
Fixes: 737413da87 ("iio: adc: ad7380: add support for ad738x-4 4 channels variants")
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-4-f0cefe1b7fa6@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
vcc and vlogic are required but are not retrieved and enabled in the
probe. Add them.
In order to prepare support for additional parts requiring different
supplies, add vcc and vlogic to the platform specific structures
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-3-f0cefe1b7fa6@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_regulator_get_enable_read_voltage() to simplify the code.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-2-f0cefe1b7fa6@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Most of this pull request is the result of Javier Carrasco doing a
careful audit for missing Kconfig dependencies that luck has meant
the random builds have never hit. The rest is the usual mix of old
bugs that have surfaced and some fallout from the recent merge window.
adi,ad5686
- Fix binding duplication of compatible strings.
bosch,bma400
- Fix an uninitialized variable in the event tap handling.
bosch,bmi323
- Fix several issues in the register saving and restore on suspend/resume
sensiron,spd500
- Fix missing CRC8 dependency
ti,op3001
- Fix a missing full-scale range value (values above this point were
all reported wrongly)
vishay,veml6030
- Fix a segmentation fault due to some type confusion.
- Fix wrong ambient light sensor resolution.
-----BEGIN PGP SIGNATURE-----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=xo8X
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.12 cycle.
Most of this pull request is the result of Javier Carrasco doing a
careful audit for missing Kconfig dependencies that luck has meant
the random builds have never hit. The rest is the usual mix of old
bugs that have surfaced and some fallout from the recent merge window.
adi,ad5686
- Fix binding duplication of compatible strings.
bosch,bma400
- Fix an uninitialized variable in the event tap handling.
bosch,bmi323
- Fix several issues in the register saving and restore on suspend/resume
sensiron,spd500
- Fix missing CRC8 dependency
ti,op3001
- Fix a missing full-scale range value (values above this point were
all reported wrongly)
vishay,veml6030
- Fix a segmentation fault due to some type confusion.
- Fix wrong ambient light sensor resolution.
* tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits)
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
Add select IIO_BUFFER and select IIO_TRIGGERED_BUFFER to the Kconfig for
the ad4695 driver.
Fixes: 6cc7e4bf2e ("iio: adc: ad4695: implement triggered buffer")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241009-iio-adc-ad4695-fix-kconfig-v1-1-e2a4dfde8d55@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver makes use of triggered buffers, but does not select the
required modules.
Fixes: 2a86487786 ("iio: adc: ti-ads8688: add trigger and buffer support")
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-4-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver makes use of triggered buffers, but does not select the
required modules.
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
Fixes: 6c7bc1d27b ("iio: adc: ti-lmp92064: add buffering support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-6-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver makes use of regmap_spi, but does not select the required
module.
Add the missing 'select REGMAP_SPI'.
Fixes: 6271989426 ("iio: adc: add ADC driver for the TI LMP92064 controller")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-5-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver makes use of triggered buffers, but does not select the
required modules.
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
Fixes: e717f8c6df ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-3-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver makes use of triggered buffers, but does not select the
required modules.
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
Fixes: d1efcf8871 ("iio: adc: ad7944: add driver for AD7944/AD7985/AD7986")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-2-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Add support for the AXP717 ADC. The AXP717 differs from other ADCs
in this series by utilizing a 14 bit ADC for all channels (a full 16
bits with the first 2 digits reserved). It also differs by lacking a
battery discharge current channel.
Note that while the current charge channel itself is included in this
driver for the AXP717 and listed in the datasheet, no scale or offset
was given for this channel. For now no scale or offset is provided in
this driver.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20240821215456.962564-13-macroalpha82@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the register for adc_en1 and adc_en2 to the axp_data struct. This
allows us to specify a different register to enable the adc channels
for different devices such as the AXP717.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240821215456.962564-2-macroalpha82@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a frequent minor comment in reviews, so start cleaning up
existing drivers in the hope we get fewer cases of cut and paste.
There are not kernel wide rules for these, but for IIO the style
that I prefer (and hence most common) is:
- Space after { and before }
- No comma after terminator { }
This may cause merge conflicts but they should be trivial to resolve
hence I have not broken this into per driver patches.
Link: https://patch.msgid.link/20240818180912.719399-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The vendorless compatible strings are deprecated and weren't retained
when the binding was converted to schema. As a result, they are listed
as undocumented when running "make dt_compatible_check". Rather than add
them back to the schema, let's just drop them as they are unnecessary.
Furthermore, they are unnecessary as the SPI matching will strip the
vendor prefix on compatible string and match that against the
spi_device_id table.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240826191728.1415189-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use `device_for_each_child_node_scoped()` in `ams_parse_firmware()`
to explicitly state device child node access, and simplify the child
node handling as it is not required outside the loop.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://patch.msgid.link/20240820-device_child_node_access-v3-1-1ee09bdedb9e@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4695 has a calibration feature that allows the user to compensate
for variations in the analog front end. This implements this feature in
the driver using the standard `calibgain` and `calibbias` attributes.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-2-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4695 and similar chips have some multibyte registers that have
to be read/written in a single operation. So we need to add a 2nd regmap
for these registers.
These registers are removed from the 8-bit regmap allowable ranges and
AD4695_MAX_REG is dropped since it would be ambiguous now.
debugfs register access is also updated to automatically use the correct
regmap depending on the register address.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-1-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This implements buffered reads for the ad4695 driver using the typical
triggered buffer implementation, including adding a soft timestamp
channel.
The chip has 4 different modes for doing conversions. The driver is
using the advanced sequencer mode since that is the only mode that
allows individual configuration of all aspects each channel (e.g.
bipolar config currently and oversampling to be added in the future).
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240813-iio-adc-ad4695-buffered-read-v2-1-9bb19fc1924b@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Models AD4114/5/6 have .higher_gpio_bits = true. This is not correct as
the only models that have the GPIO bits to a higher position are AD4111/2.
Fix by removing the higher_gpio_bits = true from the AD4114/5/6 models.
Fixes: 13d12e3ad1 ("iio: adc: ad7173: Add support for AD411x devices")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://patch.msgid.link/20240809134909.26829-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This error path was intended to return, and not just print an error. The
current code will lead to an error pointer dereference.
Fixes: 371f778b83 ("iio: adc: add support for pac1921")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/1fa4ab12-0939-477d-bc92-306fd32e4fd9@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add scaling support to STM32 DFSDM.
When used in an analog context, a DFSDM filter typically converts the data
from a sigma delta modulator. The IIO device associated to the DFSDM
filter provides these data as raw data.
The IIO device can provide scaling information (voltage and offset) to
allow conversion of raw data into physical values.
With the new binding based on IIO backend framework, the sigma delta
modulators are defined as backends providing scaling information.
The scaling is not supported with legacy binding.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-10-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The legacy sd modulator driver registers the sigma delta modulator as
an IIO channel provider. This implementation is not convenient when the
SD modulator has to be cascaded with another IIO device. The scaling
information is distributed across devices, which makes it difficult to
report consistent scaling data on IIO devices.
The solution is to expose these cascaded IIO devices as an aggregate
device, which report global scaling information.
Add IIO backend support to SD modulator to allow scaling information
management.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20240730084640.1307938-9-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move to generic channels binding to ease new backend framework adoption
and prepare the convergence with MDF IP support on STM32MP2 SoC family.
Legacy binding:
DFSDM is an IIO channel consumer.
SD modulator is an IIO channels provider.
The channel phandles are provided in DT through io-channels property
and channel indexes through st,adc-channels property.
New binding:
DFSDM is an IIO channel provider.
The channel indexes are given by reg property in channel child node.
This new binding is intended to be used with SD modulator IIO backends.
It does not support SD modulator legacy IIO devices.
The st,adc-channels property presence is used to discriminate
between legacy and backend bindings.
The support of the DFSDM legacy channels and SD modulator IIO devices
is kept for backward compatibility.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20240730084640.1307938-8-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The cfg pointer is set before reading the channel number that the
configuration should point to. This causes configurations to be shifted
by one channel.
For example setting bipolar to the first channel defined in the DT will
cause bipolar mode to be active on the second defined channel.
Fix by moving the cfg pointer setting after reading the channel number.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806085133.114547-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With commit 7b0c9f8fa3 ("iio: adc: ad_sigma_delta: Add optional irq
selection"), we can get the irq line from struct ad_sigma_delta_info
instead of the spi device. However, in devm_ad_sd_probe_trigger(), when
getting the irq_flags with irq_get_trigger_type() we are still using
the spi device irq instead of the one used for devm_request_irq().
Fixes: 7b0c9f8fa3 ("iio: adc: ad_sigma_delta: Add optional irq selection")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806-dev-fix-ad-sigma-delta-v1-1-aa25b173c063@analog.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove IRQF_TRIGGER_FALLING flag from irq request, this should come from
the platform firmware and should not be hard-coded into the driver.
Add IRQF_ONESHOT flag to the irq request, the interrupt should not be
re-activated in interrupt context, it should be done only after the
device irq handler run.
Fixes: a9306887eb ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviwed-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20240731140657.88265-1-francesco@dolcini.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
During setup the st->adc_control is 0, which corresponds to a continuous
conversion mode. The reset value for channel 1 is to enable it. The
combined effect of these two is that the ADC will start conversions for
channel 1 without them being read.
This is not neccessarily a problem, but it is an unexpected behavior.
Set the ADC state to idle during setup to avoid this.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-4-46a76aa4b9be@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_init_config_vref() function writes the AD7124_ADC_CONTROL
register for each channel that is configured to use the internal
reference.
The ad7124_write_config()function performs 7 SPI transfers for
configuring 2 registers: config_x and filter_x.
Reduce the number of SPI transfers:
-during the probe by only setting the st->adc_control value in
ad7124_init_config_vref() and writing to the device only at the end of
ad7124_setup().
-in ad7124_write_config() by grouping writes to the same register.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-3-46a76aa4b9be@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_find_similar_live_cfg() computes the compare size by
substracting the address of the cfg struct from the address of the live
field. Because the live field is the first field in the struct, the
result is 0.
Also, the memcmp() call is made from the start of the cfg struct, which
includes the live and cfg_slot fields, which are not relevant for the
comparison.
Fix by grouping the relevant fields with struct_group() and use the
size of the group to compute the compare size; make the memcmp() call
from the address of the group.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-2-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_soft_reset() function has the assumption that the chip will
assert the "power-on reset" bit in the STATUS register after a software
reset without any delay. The POR bit =0 is used to check if the chip
initialization is done.
A chip ID mismatch probe error appears intermittently when the probe
continues too soon and the ID register does not contain the expected
value.
Fix by adding a 200us delay after the software reset command is issued.
Fixes: b3af341bbd ("iio: adc: Add ad7124 support")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One useful thing to do (in case of problems) in this high speed devices
with digital interfaces is to try different test patterns to see if the
interface is working properly (and properly calibrated). Hence add this
to debugfs.
On top of this, for some test patterns, the backend may have a matching
validator block which can be helpful in identifying possible issues. For
the other patterns some test equipment must be used so one can look into
the signal and see how it looks like.
Hence, we also add the backend debugfs interface with
iio_backend_debugfs_add().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-8-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Group the backend configurations to be done in preparing and stopping
calibration in two new helpers analogous to ad9467_testmode_set(). This
is in preparation for adding support for debugFS test_mode where
we need similar configurations as in the calibration process.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-7-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a new axi_adc_read_chan_status() helper so we get the raw register
value out of it.
This is in preparation of a future change where we really want to look
into dedicated bits of the register.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-5-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of only passing the backend ops when calling
devm_iio_backend_register(), pass an info like structure that will
contains the ops and additional information. Fow now, the backend name
is being added as that will be used by the debugFS interface introduced
in a later patch.
It also opens the door for further customizations passed by backends.
All users of devm_iio_backend_register() were updated accordingly.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-1-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use of_property_present() to test for property presence rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20240731191312.1710417-5-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop the manual access to the fwnode of the device to iterate over its
child nodes. `device_for_each_child_node` macro provides direct access
to the child nodes, and given that they are only required within the
loop, the scoped variant of the macro can be used.
Use the `device_for_each_child_node_scoped` macro to iterate over the
direct child nodes of the device.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240801-device_child_node_access-v1-2-ddfa21bef6f2@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ad7386/7/8(-4) single-ended parts have a 2:1 mux in front of each ADC.
>From an IIO point of view, all inputs are exported, i.e ad7386/7/8
export 4 channels and ad7386-4/7-4/8-4 export 8 channels. First inputs
of muxes correspond to the first half of IIO channels (i.e 0-1 or 0-3)
and second inputs correspond to second half (i.e 2-3 or 4-7)
Currently, the driver supports only sampling first half OR second half of
the IIO channels. To enable sampling all channels simultaneously, these
parts have an internal sequencer that automatically cycles through the
mux entries.
When enabled, the maximum throughput is divided by two. Moreover, the ADCs
need additional settling time, so we add an extra CS toggle to correctly
propagate setting, and an additional spi transfer to read the second
half.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-6-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding ad7386/7/8 (16/14/12 bits) unsigned, dual simultaneous sampling,
single-ended compatible parts, and the corresponding ad7386-4/7-4/8-4
4 channels.
These parts have a 2:1 multiplexer in front of each ADC. They also include
additional configuration registers that allow for either manual selection
or automatic switching (sequencer mode), of the multiplexer inputs.
This commit focus on integrating manual selection. Sequencer mode will
be implemented later.
>From an IIO point of view, all inputs are exported, i.e ad7386/7/8
export 4 channels and ad7386-4/7-4/8-4 export 8 channels.
Inputs AinX0 of multiplexers correspond to the first half of IIO channels
(i.e 0-1 or 0-3) and inputs AinX1 correspond to second half (i.e 2-3 or
4-7). Example for AD7386/7/8 (2 channels parts):
IIO | AD7386/7/8
| +----------------------------
| | _____ ______
| | | | | |
voltage0 | AinA0 --|--->| | | |
| | | mux |----->| ADCA |---
voltage2 | AinA1 --|--->| | | |
| | |_____| |_____ |
| | _____ ______
| | | | | |
voltage1 | AinB0 --|--->| | | |
| | | mux |----->| ADCB |---
voltage3 | AinB1 --|--->| | | |
| | |_____| |______|
| |
| +----------------------------
When switching channel, the ADC require an additional settling time.
According to the datasheet, data is valid on the third CS low. We already
have an extra toggle before each read (either direct reads or buffered
reads) to sample correct data, so we just add a single CS toggle at the
end of the register write.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-5-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ad738x family contains single-ended parts that have a 2:1 mux in front
of ADC, so the number of IIO channels is different from the number of
simultaneous channels that can be sampled.
To prepare the support for single-ended parts, introduce a new
num_simultaneous_channels variable. For currently supported parts,
num_simultaneous_channels is equal to num_channels minus 1 (the
timestamps channel)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-4-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for AD4000 series of low noise, low power, high speed,
successive approximation register (SAR) ADCs.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/356109ac61182f16f2379d5d0cadccfe017f505b.1720810545.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for Microchip PAC1921 Power/Current monitor.
Implemented features:
* capture of bus voltage, sense voltage, current and power measurements
in free-run integration mode
* support for both raw and triggered buffer reading
* support for overflow events
* scale attributes to control voltage and current gains
* oversampling ratio attribute to control the number of integration
samples
* sampling rate attribute that reflects the integration period
* userspace attribute and DT parameter to control shunt resistor
* simple power management support
Limitations:
* operation mode fixed to free-run integration
* READ/INT pin and OUT pin not supported
* no controls for measurement resolutions and filters
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240724-iio-pac1921-v4-3-723698e903a3@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This makes use of the new devm_regulator_get_enable_read_voltage()
helper function to reduce boilerplate code in the MCP3564 ADC driver.
The error message is slightly changed since there are fewer error
return paths.
Setting adc->vref_mv is consolidated into a single place to make the
logic easier to follow.
A use_internal_vref_attr local variable is added to make it more
obvious what the difference between the two iio info structures is.
The return value of the "Unknown Vref" dev_err_probe() is hard-coded to
-ENODEV instead of ret since it was getting a bit far from where ret
was set and logically that is the only value it could have.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://patch.msgid.link/20240723-iio-regulator-refactor-round-3-v2-1-ae9291201785@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
