max_sw_wqe used for static wqe mode should be same as the max_wqe.
Calculate the max_sw_wqe only for the variable WQE mode.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Link: https://patch.msgid.link/r/1726715161-18941-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When variable size WQE is supported, max_qp_sges reported
is more than 6. For devices that supports variable size WQE,
the Send WQE size calculation is wrong when an an older library
that doesn't support variable size WQE is used.
Set the WQE size to 128 when static WQE is supported.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725444253-13221-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
For older adapters that doesn't support variable size WQE,
driver is wrongly reporting that variable WQE is supported,
when the latest library is used.
Report the variable WQE capability only if the driver supports
it.
Fixes: 10a104c0de ("RDMA/bnxt_re: Enable variable size WQEs for user space applications")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725444253-13221-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some of the adapters support Relaxed Ordering for the MRs.
Driver queries support for Memory region relax ordering support from
firmware and set relax ordering bit in REGISTER_MR request, if the users
request for the support. Also, this is supported only if the PCIe device
has enabled relaxed ordering attribute.
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vijay Kumar Mandadapu <vijaykumar.mandadapu@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725256351-12751-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Firmware now have a new mr registration command where
both MR allocation and registration can be done in a
single hwrm command. Driver has to issue this new hwrm
command whenever the support flag is set. This reduces
the number of hwrm issued per MR creation and speed up
the MR creation.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725256351-12751-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info to arm the SRQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the SRQ structure from the SRQ ID.
SRQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per SRQ. This
can be optimized to enable multiple SRQs from the same
application share the same page and different offsets
in the page
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1724945645-14989-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Refactor the code in this function to have common code.
This is used in subsequent patches.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1724945645-14989-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Selvin Xavier says:
=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better utilization of the queue memory
and pci bandwidth due to the smaller send queue Work entries.
=============
Based on v6.11-rc5 for dependencies.
* bnxt_re_variable_wqes: (829 commits)
RDMA/bnxt_re: Enable variable size WQEs for user space applications
RDMA/bnxt_re: Handle variable WQE support for user applications
RDMA/bnxt_re: Fix the table size for PSN/MSN entries
RDMA/bnxt_re: Get the WQE index from slot index while completing the WQEs
RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters
Linux 6.11-rc5
...
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add backward compatibility code to enable variable size WQEs only if the
user lib supports it.
Link: https://patch.msgid.link/r/1724042847-1481-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
User library calculates the number of slots required for user applications
and it can pass that information to the driver. Driver can use this value
and update the HW directly. This mechanism is currently used only for the
newly introduced variable size WQEs.
Extend the bnxt_re_qp_req structure to pass the Send Queue slot count.
Reorganize the code to get the sq_slots before initializing the Send Queue
attributes.
Link: https://patch.msgid.link/r/1724042847-1481-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW MSN table size is always a power of 2. So the pages should be mapped
accordingly.
Use the power of two calculation while get the number of PSN/MSN entries.
Fixes: 6f6bfbc595 ("RDMA/bnxt_re: Expose the MSN table capability for user library")
Link: https://patch.msgid.link/r/1724042847-1481-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Variable size WQE means that each send Work Queue Entry to HW can use
different WQE sizes as opposed to the static WQE size on the current
devices. Set variable WQE mode for Gen P7 devices. Depth of the Queue will
be a multiple of slot which is 16 bytes. The number of slots should be a
multiple of 256 as per the HW requirement.
Initialize the Software shadow queue to hold requests equal to the number
of slots. Also, do not expose the variable size WQE capability until the
last patch in the series.
Link: https://patch.msgid.link/r/1724042847-1481-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pass uverbs_attr_bundle as part of '.reg_user_mr_dmabuf' API instead of
udata.
This enables passing some new ioctl attributes to the drivers, as will
be introduced in the next patches for mlx5 driver.
Change the involved drivers accordingly.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/9a25b2fc02443f7c36c2d93499ae25252b6afd40.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When map a device between servers with MLX and BCM RoCE nics, RTRS
server complain about unknown imm type, and can't map the device,
After more debug, it seems bnxt_re wrongly handle the
imm_data, this patch fixed the compat issue with MLX for us.
In off list discussion, Selvin confirmed HW is working in little endian format
and all data needs to be converted to LE while providing.
This patch fix the endianness for imm_data
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20240710122102.37569-1-jinpu.wang@ionos.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Changes the create_cq verb signature by sending the entire uverbs attr
bundle as a parameter. This allows drivers to send driver specific attrs
through ioctl for the create_cq verb and access them in their driver
specific code.
Also adds a new enum value for driver specific ioctl attributes for
methods already supporting UHW.
Link: https://lore.kernel.org/r/ed147343987c0d43fd391c1b2f85e2f425747387.1719512393.git.leon@kernel.org
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
BNXT_RE_COMP_MASK_UCNTX_HW_RETX_ENABLED was introduced to share the HW
retransmit capability between driver and lib. The main difference in
implementation for HW Retransmit support is the usage of MSN table or
PSN table . When HW retrans is enabled, HW expects MSN table to be
allocated by driver/lib, else PSN table (for older adapters).
FW expose a new field which gives MSN capability. Drivers and libs can
depend on the new field instead of HW Retrasns capability. For
adapters which support HW_RETX feature, MSN table capability will be
set. For older adapters, this value will be 0(to maintain backward
compatibility with older FW).
Rename UAPI just to capture the correct name of the HW capability
that driver/library is interested in. No functional impact even if
older rdma-core is used.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716876697-25970-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
SRQ resize is not supported in the driver. But driver is not
returning error from bnxt_re_modify_srq() for SRQ resize.
Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1705985677-15551-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Limit the usage of fence MR to adapters older than Gen P5 products.
Fixes: 1801d87b35 ("RDMA/bnxt_re: Support new 5760X P7 devices")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1705985677-15551-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Return -ENOMEM if get_zeroed_page() fails. Don't return success.
Fixes: e275919d96 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Link: https://lore.kernel.org/r/d714306e-b7d7-4e89-b973-a9ff0f260c78@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info during the request notify call back to arm the CQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the CQ structure from the CQ ID.
CQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per CQ. This
can be optimized to enable multiple CQs from the same
application share the same page and different offsets
in the page.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gen P7 adapters require to share a toggle value for CQ
and SRQ. This is received by the driver as part of
interrupt notifications and needs to be shared with the
user space. Add a new UAPI infrastructure to get the
shared page for CQ and SRQ.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add basic support for 5760X P7 devices. Add new chip
revisions. The first version support is similar to
the existing P5 adapters. Extend the current support
for P5 adapters to P7 also.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1701946060-13931-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Rounding up the queue depth to power of two is not a hardware requirement.
In order to optimize the per connection memory usage, removing drivers
implementation which round up to the queue depths to the power of 2.
Implements a mask to maintain backward compatibility with older
library.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1698069803-1787-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Many small changes across the subystem, some highlights:
- Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma, mthca,
hns, and bnxt_re
- siw now works over tunnel and other netdevs with a MAC address by
removing assumptions about a MAC/GID from the connection manager
- "Doorbell Pacing" for bnxt_re - this is a best effort scheme to allow
userspace to slow down the doorbell rings if the HW gets full
- irdma egress VLAN priority, better QP/WQ sizing
- rxe bug fixes in queue draining and srq resizing
- Support more ethernet speed options in the core layer
- DMABUF support for bnxt_re
- Multi-stage MTT support for erdma to allow much bigger MR registrations
- A irdma fix with a CVE that came in too late to go to -rc, missing
bounds checking for 0 length MRs
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZPEqkAAKCRCFwuHvBreF
YZrNAPoCBfU+VjCKNr2yqF7s52os5ZdBV7Uuh4txHcXWW9H7GAD/f19i2u62fzNu
C27jj4cztemMBb8mgwyxPw/wLg7NLwY=
=pC6k
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Many small changes across the subystem, some highlights:
- Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma,
mthca, hns, and bnxt_re
- siw now works over tunnel and other netdevs with a MAC address by
removing assumptions about a MAC/GID from the connection manager
- "Doorbell Pacing" for bnxt_re - this is a best effort scheme to
allow userspace to slow down the doorbell rings if the HW gets full
- irdma egress VLAN priority, better QP/WQ sizing
- rxe bug fixes in queue draining and srq resizing
- Support more ethernet speed options in the core layer
- DMABUF support for bnxt_re
- Multi-stage MTT support for erdma to allow much bigger MR
registrations
- A irdma fix with a CVE that came in too late to go to -rc, missing
bounds checking for 0 length MRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits)
IB/hfi1: Reduce printing of errors during driver shut down
RDMA/hfi1: Move user SDMA system memory pinning code to its own file
RDMA/hfi1: Use list_for_each_entry() helper
RDMA/mlx5: Fix trailing */ formatting in block comment
RDMA/rxe: Fix redundant break statement in switch-case.
RDMA/efa: Fix wrong resources deallocation order
RDMA/siw: Call llist_reverse_order in siw_run_sq
RDMA/siw: Correct wrong debug message
RDMA/siw: Balance the reference of cep->kref in the error path
Revert "IB/isert: Fix incorrect release of isert connection"
RDMA/bnxt_re: Fix kernel doc errors
RDMA/irdma: Prevent zero-length STAG registration
RDMA/erdma: Implement hierarchical MTT
RDMA/erdma: Refactor the storage structure of MTT entries
RDMA/erdma: Renaming variable names and field names of struct erdma_mem
RDMA/hns: Support hns HW stats
RDMA/hns: Dump whole QP/CQ/MR resource in raw
RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp()
RDMA/mlx4: Copy union directly
RDMA/irdma: Drop unused kernel push code
...
Support the new verb which indicates dmabuf support. bnxt doesn't support
ODP. So use the pinned version of the dmabuf APIs to enable bnxt_re
devices to work as dmabuf importer.
Link: https://lore.kernel.org/r/1690790473-25850-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Syncrhonization is required to avoid simultaneous allocation
of the PD. Add a new mutex lock to handle allocation from
the PD table.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1692032419-21680-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There are a little ternary operators, the true or false judgment
of which is unnecessary in C language semantics.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230731085118.394443-1-ruanjinjie@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Report the additional resource counters which enables
better debugging. Includes active RC/UD QPs,
Watermark of the resources and a count that indicates the
resize cq operations after driver load.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1690383081-15033-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Update the alloc_page uapi functionality for handling the
mapping of doorbell pacing shared page and bar address.
Link: https://lore.kernel.org/r/1689742977-9128-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW may generate completions that indicates QP is destroyed.
Driver should not be scheduling any more completion handlers
for this QP, after the QP is destroyed. Since CQs are active
during the QP destroy, driver may still schedule completion
handlers. This can cause a race where the destroy_cq and poll_cq
running simultaneously.
Snippet of kernel panic while doing bnxt_re driver load unload in loop.
This indicates a poll after the CQ is freed.
[77786.481636] Call Trace:
[77786.481640] <TASK>
[77786.481644] bnxt_re_poll_cq+0x14a/0x620 [bnxt_re]
[77786.481658] ? kvm_clock_read+0x14/0x30
[77786.481693] __ib_process_cq+0x57/0x190 [ib_core]
[77786.481728] ib_cq_poll_work+0x26/0x80 [ib_core]
[77786.481761] process_one_work+0x1e5/0x3f0
[77786.481768] worker_thread+0x50/0x3a0
[77786.481785] ? __pfx_worker_thread+0x10/0x10
[77786.481790] kthread+0xe2/0x110
[77786.481794] ? __pfx_kthread+0x10/0x10
[77786.481797] ret_from_fork+0x2c/0x50
To avoid this, complete all completion handlers before returning the
destroy QP. If free_cq is called soon after destroy_qp, IB stack
will cancel the CQ work before invoking the destroy_cq verb and
this will prevent any race mentioned.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSYzfYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/ucH/iOM/1Py/fSg0qSs
7NJ4XXlourT5zrnRMom3cm3d9gYqgTzgvKFL3kjMEexTRVYbhlcO4ZPRsiry8zxF
ToGX+V8tDMqb8WSdFHzkljRY+zDRyfEUDMlTzROAD9DunLmQtkJKyrggkeGdjkpP
OyfGqKpwlLXZRAXBil/U8Mx9MHdjJubloZwghLZr33VdUZa68+JJ9l6w163Oe/ET
K264NM0wxN/kvN57JvePgqMccQwpINylg8IhRI+XelgczjUXeJBsOA8TDv4bDN4Q
bjCLhkWbIaZtTYqvOXa/kD0T8wd7KETsMBQN8YzyDh6W0GmAlJjTawyAhA6jA5in
x3uz2W8=
=L3zp
-----END PGP SIGNATURE-----
Merge tag 'v6.4' into rdma.git for-next
Linux 6.4
Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:
drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bnxt_re_mmap_entry_insert() function returns NULL, not error pointers.
Update the check for errors accordingly.
Fixes: 360da60d6c ("RDMA/bnxt_re: Enable low latency push")
Link: https://lore.kernel.org/r/8d92e85f-626b-4eca-8501-ca7024cfc0ee@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce driver specific uapi functionalites. Added a alloc_page
functionality for user library to allocate specific pages. Currently added
support for allocating write combine pages for push functinality. This
interface shall be extended for other page allocations.
Allocate a WC page using the uapi hook for enabling the low latency push
in Gen P5 adapters for small packets. This is supported only for the user
space QPs.
Link: https://lore.kernel.org/r/1686679943-17117-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reorganize the code for allocation and mapping of Doorbell
pages. Implements new HW command to get the BAR length used by L2
driver. These changes are used by the future patch which maps the WC
Doorbell pages.
Also, introduced a new lock dpi_tbl_lock for synchronize the DB page
allocation from users.
Link: https://lore.kernel.org/r/1686679943-17117-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace the mmap handling function with common code in IB core. Create
rdma_user_mmap_entry for each mmap resource and add to the ib_core mmap
list. Add mmap_free verb support. Also, use rdma_user_mmap_io while
mapping Doorbell pages.
Link: https://lore.kernel.org/r/1686679943-17117-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If destroy_ah is timed out, it is likely to be destroyed by firmware
but it is taking longer time due to temporary slowness
in processing the rcfw command. In worst case, there might be
AH resource leak in firmware.
Sending timeout return value can dump warning message from ib_core
which can be avoided if we map timeout of destroy_ah as success.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-14-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
After commit 6d758147c7 ("RDMA/bnxt_re: Use auxiliary driver interface")
the active_{speed, width} attributes are reported incorrectly, This is
happening because ib_get_eth_speed() is called only once from
bnxt_re_ib_init() - Fix this issue by calling ib_get_eth_speed() from
bnxt_re_query_port().
Fixes: 6d758147c7 ("RDMA/bnxt_re: Use auxiliary driver interface")
Link: https://lore.kernel.org/r/20230529153525.87254-1-kheib@redhat.com
Signed-off-by: Kamal Heib <kheib@redhat.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add resize_cq verb support for user space CQs. Resize operation for
kernel CQs are not supported now.
Driver should free the current CQ only after user library polls
for all the completions and switch to new CQ. So after the resize_cq
is returned from the driver, user library polls for existing completions
and store it as temporary data. Once library reaps all completions in the
current CQ, it invokes the ibv_cmd_poll_cq to inform the driver about
the resize_cq completion. Adding a check for user CQs in driver's
poll_cq and complete the resize operation for user CQs.
Updating uverbs_cmd_mask with poll_cq to support this.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1678868215-23626-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RoCE spec requires RoCE devices to support only the default pkey.
However the bnxt_re driver maintains a 0xFFFF entry pkey table and uses
only the first entry. Remove the pkey table and hard code a table of
length one hard wired with the default pkey.
Link: https://lore.kernel.org/r/20211125033615.483750-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Devesh Sharma <devesh.s.sharma@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
