The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231031222851.3126434-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231031222851.3126434-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231031222851.3126434-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Several interconnect/qcom drivers use qnoc_remove() as remove callback.
Make this function return void (instead of unconditionally zero) and
adapt the drivers using this function accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231031222851.3126434-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Several drivers use qcom_icc_rpmh_remove() as remove callback which
returns zero unconditionally. Make it return void and use .remove_new in
the drivers. There is no change in behaviour.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231015135955.1537751-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* icc-misc
interconnect: imx: Replace custom implementation of COUNT_ARGS()
interconnect: msm8974: Replace custom implementation of COUNT_ARGS()
interconnect: qcom: osm-l3: Replace custom implementation of COUNT_ARGS()
interconnect: fix error handling in qnoc_probe()
interconnect: imx: Replace inclusion of kernel.h in the header
dt-bindings: interconnect: qcom,rpmh: do not require reg on SDX65 MC virt
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add missing clk_disable_unprepare() and clk_bulk_disable_unprepare()
in the error path in qnoc_probe(). And when qcom_icc_qos_set() fails,
it needs remove nodes and disable clks.
Fixes: 2e2113c8a6 ("interconnect: qcom: rpm: Handle interface clocks")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230803130521.959487-1-yangyingliang@huawei.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add interconnect driver support for SDX75 platform.
* icc-sdx75
dt-bindings: interconnect: Add compatibles for SDX75
interconnect: qcom: Add SDX75 interconnect provider driver
Link: https://lore.kernel.org/r/1694614256-24109-1-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>anter a commit message to explain why this merge is necessary,
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: d26a566744 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-11-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 6df5b34949 ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-10-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: a09b817c8b ("interconnect: qcom: Add SM8150 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-9-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: b5d2f74107 ("interconnect: qcom: Add sdm845 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-7-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 46bdcac533 ("interconnect: qcom: Add SC7280 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-3-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 2d1f95ab9f ("interconnect: qcom: Add SC7180 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-2-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 1f51339f7d ("interconnect: qcom: Add QDU1000/QRU1000 interconnect driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-1-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
QCM2290 can support two memory configurations: single-channel, 32-bit
wide LPDDR3 @ up to 933MHz (bus clock) or dual-channel, 16-bit wide
LPDDR4X @ up to 1804 MHz. The interconnect driver in its current form
seems to gravitate towards the first one, however there are no LPDDR3-
equipped boards upstream and we still don't have a great way to discern
the DDR generations on the kernel side.
To make DDR scaling possible on the only currently-supported 2290
board, stick with the LPDDR4X config by default. The side effect on any
potential LPDDR3 board would be that the requested bus clock rate is
too high (but still capped to the firmware-configured FMAX).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-7-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This single node has its own clock which seems to be responsible for
transactions between CPUSS (CPU + some stuff) and the GNOC. See [1]
for reference.
Define it and hook it up.
[1] 02f8c342b2%5E%21/#F0
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-5-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
If this hardware couldn't get messier, some nodes are supposed to drive
their own bus clock.. Presumably to connect to some intermediate
interface between the node itself and the bus it's (supposed to be)
connected to.
Expand the node struct with the necessary data and hook up the
allocations & calculations.
Note that the node-specific AB/IB coefficients contribute (by design)
to both the node-level and the bus-level aggregation.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-3-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Presumably due to the hardware being so complex, some nodes (or busses)
have different (usually higher) requirements for bandwidth than what
the usual calculations would suggest.
Looking at the available downstream files, it seems like AB values are
adjusted per-bus and IB values are adjusted per-node.
With that in mind, introduce percentage-based coefficient struct members
and use them in the calculations.
One thing to note is that the IB coefficient is inverse (100/ib_percent)
which feels a bit backwards, but it's necessary for precision..
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-1-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
BCMs with an enable_mask expect to only have that specific value written
to them. The current implementation only works by miracle for BCMs with
enable mask == BIT(0), as the minimal vote we've been using so far just
so happens to be equal to that.
Use the correct value with keepalive voting.
Fixes: d8630f050d ("interconnect: qcom: Add support for mask-based BCMs")
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-2-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
We don't need all the complex arithmetic for BCMs utilizing enable_mask,
as all we need to do is to determine whether there's any user (or
keepalive) asking for it to be on.
Separate the logic for such BCMs for a small speed boost.
Suggested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-1-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Enable sync_state on sm8450 so that the interconnect votes actually mean
anything and aren't just pinned to INT_MAX.
Fixes: fafc114a46 ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_syncstate-v1-1-69ae5552a18b@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct icc_onecell_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Georgi Djakov <djakov@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230817204215.never.916-kees@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This series contains fixes necessary for icc to behave correctly
on QCM2290.
* icc-qcm2290
interconnect: qcom: qcm2290: Enable keep_alive on all buses
interconnect: qcom: qcm2290: Enable sync state
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-0-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmTZISMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGP+kH/RJWesO8dQ1b2jRh
v1dexbytGUykROpmHBnJKDznwsSBnhDlI9Tu62dumWKRrCzwZto8Hag1QC2jYrra
x7f3W087HdTSh3j5B92kGK/ZXgm4NwjVI078ujSv/e+qJMB3behpdL7uUkFUeeVV
OaDhlSL4ILlyVOYPX3sHMiPutmZcXxe8/25o4aylpBrzlClKen7OODRz6gIwyVOR
Nufgi/H5bkB4rDLOVI87HrxQMSpCtyGJtjTB78e/aRvIwYhJq16iuq+uBqOxQqgr
anlg1nJ3r6/LphiT9H63xNFwIJDxtL7I1V8CQ9Jyvf/O4MNGSaM7sHw2l8ujTxU9
hf4GYyY=
=loC2
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rc6' into icc-next
The fixes that got merged into v6.5-rc6 are needed here.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Enable the generic .sync_state callback to ensure there are no
outstanding votes that would waste power.
Generally one would need a bunch of interface clocks to access the QoS
registers when trying to go over all possible nodes during sync_state,
but QCM2290 surprisingly does not seem to require any such handling.
Fixes: 1a14b1ac39 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-2-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
QCM2290 expects all buses to be up at all times when the CPU is
active. Enable keep_alive on all of them to achieve that.
Fixes: 1a14b1ac39 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-1-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
SM8250 (like SM8150 but unlike all other QUP-equipped SoCs) doesn't
provide a qup-core path. Adjust the bindings and drivers as necessary,
and then describe the icc paths in the device tree. This makes it possible
for interconnect sync_state succeed so long as you don't use UFS.
* icc-sm8250-qup
dt-bindings: interconnect: qcom,rpmh: Add SM8250 QUP virt
dt-bindings: interconnect: qcom,sm8250: Add QUP virt
interconnect: qcom: sm8250: Fix QUP0 nodes
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-0-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The QUP0 BCM relates to some internal property of the QUPs, and should
be configured independently of the path to the QUP. In line with other
platforms expose QUP_CORE endpoints in order allow this configuration.
Fixes: 6df5b34949 ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-3-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Fix the following smatch error:
drivers/interconnect/qcom/icc-rpm.c:243 qcom_icc_rpm_set() error: uninitialized symbol 'ret'.
Fixes: 32846c4a8f ("interconnect: qcom: icc-rpm: Set bandwidth on both contexts")
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230717125534.2455745-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174638.4058268-1-robh@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Up until now, we've been aggregating the bandwidth values and only
dividing them by the bus width of the source node. This was completely
wrong, as different nodes on a given path may (and usually do) have
varying bus widths. That in turn, resulted in the calculated clock rates
being completely bogus - usually they ended up being much higher, as
NoC_A<->NoC_B links are very wide.
Since we're not using the aggregate bandwidth value for anything other
than clock rate calculations, remodel qcom_icc_bus_aggregate() to
calculate the per-context clock rate for a given provider, taking into
account the bus width of every individual node.
Fixes: 30c8fa3ec6 ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-22-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently, we're setting the aggregated-on-provider bandwidth on each
node, individually. That is of course incorrect and results in far too
high votes. Use the correct values to ensure we're not wasting power.
Fixes: 30c8fa3ec6 ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-21-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Up until now, for some reason we've only been setting bandwidth values
on the active-only context. That pretty much meant that RPM could lift
all votes when entering sleep mode. Or never sleep at all.
That in turn could potentially break things like USB wakeup, as the
connection between APSS and SNoC/PNoC would simply be dead.
Set the values appropriately.
Fixes: 30c8fa3ec6 ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-20-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SMD RPM only provides two buckets, one each for the active-only and
active-sleep RPM contexts. Use the correct constant to allocate and
operate on them.
This will make the qcom,icc.h header no longer work with this driver,
mostly because.. it was never meant to! The commit that introduced
bucket support to SMD RPM was trying to shove a square into a round
hole and it did not work out very well. That said, there are no
active users of SMD RPM ICC + qcom,icc.h, so that doesn't hurt.
Fixes: dcbce7b0a7 ("interconnect: qcom: icc-rpm: Support multiple buckets")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-19-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The sole purpose of bus clocks that were previously registered with
rpmcc was to convey the aggregated bandwidth to RPM. There's no good
reason to keep them outside the interconnect framework, as it only
adds to the plentiful complexity.
Add the required code to handle these clocks from within SMD RPM ICC.
RPM-owned bus clocks are no longer considered a thing, but sadly we
have to allow for the existence of HLOS-owned bus clocks, as some
(mostly older) SoCs (ab)use these for bus scaling (e.g. MSM8998 and
&mmcc AHB_CLK_SRC).
This in turn is trivially solved with a single *clk, which is filled
and used iff qp.bus_clk_desc is absent and we have a "bus" clock-names
entry in the DT node.
This change should(tm) be fully compatible with all sorts of old
Device Trees as far as the interconnect functionality goes (modulo
abusing bus clock handles or wrongly using the qcom,icc.h binding,
but that's a mistake in and of itself).
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-17-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-16-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-15-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-14-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-13-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-12-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-11-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the definitions for RPM bus clocks that will be used by many
different platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-10-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce qcom_icc_rpm_set_bus_rate() in preparation for handling RPM
clock resources within the interconnect framework. This lets us greatly
simplify all of the code handling, as setting the rate comes down to:
u32 rate_khz = max(clk.sleep_rate, clk.active_rate, clk_a.active_rate)
write_to_rpm(clock.description, rate_khz);
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-9-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
smd-rpm.h is not very useful as-is and both files are always included
anyway.. Combine them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-8-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently the header does not provide all the required dependencies.
Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-7-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The downstream kernel employs the concept of "keeping the bus alive"
by voting for the minimum (XO/19.2MHz) rate at all times on certain
(well, most) buses. This is a very important thing to have, as if we
either have a lackluster/wrong DT that doesn't specify a (high enough)
vote on a certain bus, we may lose access to the entire bus altogether.
This is very apparent when we only start introducing interconnect
support on a given platform and haven't yet introduced voting on all
peripherals.
The same can happen if we only have a single driver casting a vote on
a certain bus and that driver exits/crashes/suspends.
The keepalive vote is limited to the ACTIVE bucket, as keeping a
permanent vote on the SLEEP one could prevent the platform from properly
entering low power mode states.
Introduce the very same concept, with a slight twist: the vendor
kernel checks whether the rate is zero before setting the minimum
vote, but that's rather silly, as in doing so we're at the mercy
of CCF. Instead, explicitly clamp the rates to always be >= 19.2 MHz
for providers with keep_alive=true.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-6-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some BCMs aren't directly associated with the data path (i.e. ACV) and
therefore don't communicate using BW. Instead, they are simply
enabled/disabled with a simple bit mask. Add support for these.
Origin commit retrieved from:
2d1573e020
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[narmstrong: removed copyright change from original commit]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-1-709474b151cc@linaro.org
Fixes: fafc114a46 ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This was not allocating enough bytes. There are two issue here.
First, there was a typo where it was taking the size of the pointer
instead of the size of the struct, "sizeof(qp->intf_clks)" vs
"sizeof(*qp->intf_clks)". Second, it's an array of "cd_num" clocks so
we need to allocate space for more than one element.
Fixes: 2e2113c8a6 ("interconnect: qcom: rpm: Handle interface clocks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/e0fa275c-ae63-4342-9c9e-0ffaf6314da1@kili.mountain
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The interconnect driver is (or soon will be) vital to many other
devices, as it's not a given that the bootloader will set up enough
bandwidth for us or that the values we come into are reasonable.
Promote the driver to core_initcall to ensure the consumers (i.e.
most "meaningful" parts of the SoC) can probe without deferrals.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-8-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Commit dd42ec8ea5 ("interconnect: qcom: rpm: Use _optional func for provider clocks")
relaxed the requirements around probing bus clocks. This was a decent
solution for making sure MSM8996 would still boot with old DTs, but
now that there's a proper fix in place that both old and new DTs
will be happy about, revert back to the safer variant of the
function.
Fixes: dd42ec8ea5 ("interconnect: qcom: rpm: Use _optional func for provider clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-7-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
For SMD RPM bus scaling to work, we need a pair of sleep-wake clocks.
The variable number of them we previously supported was only a hack
to keep the clocks required for QoS register access, but now that
these are separated, we can leave bus_clks to the actual bus clocks.
In cases where there is no actual bus scaling (such as A0NoC on MSM8996
and GNoC on SDM660 where the HLOS is only supposed to program the QoS
registers and the bus is either static or controlled remotely), allow
for no clock scaling with a boolean property.
Remove all the code related to allowing an arbitrary number of bus_clks,
replace the number by BUS_CLK_MAX (= 2) and guard the bus clock paths
to ensure they are not taken on non-scaling buses.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-6-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Some (but not all) providers (or their specific nodes) require
specific clocks to be turned on before they can be accessed. Failure
to ensure that results in a seemingly random system crash (which
would usually happen at boot with the interconnect driver built-in),
resulting in the platform not booting up properly.
Limit the number of bus_clocks to 2 (which is the maximum that SMD
RPM interconnect supports anyway) and handle non-scaling clocks
separately. Update MSM8996 and SDM660 drivers to make sure they do
not regress with this change.
This unfortunately has to be done in one patch to prevent either
compile errors or broken bisect.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230518195801.2556998-1-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The QoS registers are (or according to Qualcomm folks, on most
platforms) persistent until a full chip reboot. Move the QoS-setting
functions to the probe function so that we don't needlessly do it over
and over again.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-4-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
In preparation for handling non-scaling clocks that we still have to
enable, rename num_clocks to more descriptive num_bus_clocks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-2-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Rename the "clocks" (and _names) fields of qcom_icc_desc to
"bus_clocks" in preparation for introducing handling of clocks that
need to be enabled but not voted on with aggregate frequency.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-1-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Sort the kerneldoc entries the same way the struct members are
sorted.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v7-3-815606092fff@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Some nodes, like EBI0 (DDR) or L3/LLCC, may be connected over more than
one channel. This should be taken into account in bandwidth calcualtion,
as we're supposed to feed msmbus with the per-channel bandwidth. Add
support for specifying that and use it during bandwidth aggregation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v7-2-815606092fff@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Currently NOC_QOS_MODE_FIXED is defined as 0x0 which makes it the
default option (partial struct initialization). The default option
however should be NOC_QOS_MODE_INVALID.
That results in bogus QoS configurations being sent for port 0 (which
is used for the DRAM endpoint on BIMC, for example) coming from all nodes
with .qos.ap_owned = true and uninitialized .qos.qos_mode. It's also an
issue for newer SoCs where all nodes are treated as if they were ap_owned,
but not all of them have QoS configuration.
The NOC_QOS_MODEs are defined as preprocessor constants and are not used
anywhere outside qcom_icc_set_noc_qos(), which is easily worked around.
Separate the desc->type values from the values sent to msmbus in the
aforementioned function. Make the former an enum for better mainainability.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v7-1-815606092fff@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Any power domain would already have been attached by the platform bus
code so drop the bogus power domain attach which always succeeds from
probe.
This effectively reverts commit 7de109c0ab ("interconnect: icc-rpm:
Add support for bus power domain").
Fixes: 7de109c0ab ("interconnect: icc-rpm: Add support for bus power domain")
Cc: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # MSM8996 Sony Kagura
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230313084953.24088-3-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The commit 4529992c94 ("interconnect: qcom: osm-l3: Use
platform-independent node ids") made osm-l3 driver use
platform-independent IDs, removing the need to include platform headers.
Fixes: 4529992c94 ("interconnect: qcom: osm-l3: Use platform-independent node ids")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230103031159.1060075-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
