If more than 255 colocated APs exist for the set of all
APs found during 2.4/5 GHz scanning, then the 6 GHz scan
construction will loop forever since the loop variable
has type u8, which can never reach the number found when
that's bigger than 255, and is stored in a u32 variable.
Also move it into the loops to have a smaller scope.
Using a u32 there is fine, we limit the number of APs in
the scan list and each has a limit on the number of RNR
entries due to the frame size. With a limit of 1000 scan
results, a frame size upper bound of 4096 (really it's
more like ~2300) and a TBTT entry size of at least 11,
we get an upper bound for the number of ~372k, well in
the bounds of a u32.
Cc: stable@vger.kernel.org
Fixes: eae94cf82d ("iwlwifi: mvm: add support for 6GHz")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219375
Link: https://patch.msgid.link/20241023091744.f4baed5c08a1.I8b417148bbc8c5d11c101e1b8f5bf372e17bf2a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Revert commit dfdfe4be18 ("wifi: iwlwifi: remove retry loops in
start"), it turns out that there's an issue with the PNVM load
notification from firmware not getting processed, that this patch
has been somewhat successfully papering over. Since this is being
reported, revert the loop removal for now.
We will later at least clean this up to only attempt to retry if
there was a timeout, but currently we don't even bubble up the
failure reason to the correct layer, only returning NULL.
Fixes: dfdfe4be18 ("wifi: iwlwifi: remove retry loops in start")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241022092212.4aa82a558a00.Ibdeff9c8f0d608bc97fc42024392ae763b6937b7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we add the vif (and its default link) in fw restart we may
override the link that already exists. We take care of this but if
link 0 is a valid MLO link, then we will re-create a default link on
mvmvif->link[0] and we'll loose the real link we had there.
In non-MLO, we need to re-create the default link upon the interface
creation, this is fine. In MLO, we'll just wait for change_vif_links()
to re-build the links.
Fixes: bf976c814c ("wifi: iwlwifi: mvm: implement link change ops")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.385bfea1b2e9.I4a127312285ccb529cc95cc4edf6fbe1e0a136ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1. The size of the response packet is not validated.
2. The response buffer is not freed.
Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer.
Fixes: f130bb75d8 ("iwlwifi: add FW recovery flow")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When starting the suspend flow, HOST_D3_START triggers an _async_
firmware dump collection for debugging purposes. The async worker
may race with suspend flow and fail to get NIC access, resulting in
the following warning:
"Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)"
Fix this by switching to the sync version to ensure the dump
completes before proceeding with the suspend flow, avoiding
potential race issues.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.9aae318cd593.I4b322009f39489c0b1d8893495c887870f73ed9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_send_ap_tx_power_constraint_cmd is a no-op if the link is not
active (we need to know the band etc.)
However, for the station case it will be called just before we set the
link to active (by calling iwl_mvm_link_changed with
the LINK_CONTEXT_MODIFY_ACTIVE bit set in the 'changed' flags and
active = true), so it will end up doing nothing.
Fix this by calling iwl_mvm_send_ap_tx_power_constraint_cmd before
iwl_mvm_link_changed.
Fixes: 6b82f4e119 ("wifi: iwlwifi: mvm: handle TPE advertised by AP")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.5c235fccd3f1.I2d40dea21e5547eba458565edcb4c354d094d82a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Release the link mapping resource in AP removal. This impacted devices
that do not support the MLD API (9260 and down).
On those devices, we couldn't start the AP again after the AP has been
already started and stopped.
Fixes: a8b5d4809b ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.c54c42779882.Ied79e0d6244dc5a372e8b6ffa8ee9c6e1379ec1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the ifdef CONFIG_PM by CONFIG_PM_SLEEP. CONFIG_PM was useful
when we had CONFIG_PM_RUNTIME but that was removed long ago.
Use PM_SLEEP consistently across the driver.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.44e47ba584de.I64f985d0405345252b76b7157291b79677abd64d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex has recently started to see active development which is good
news. rtw89 is also under active development and got several new
features. Otherwise not really anything out of ordinary.
We have one conflict in ath12k but that's easy to fix:
https://lore.kernel.org/all/20240808104348.6846e064@canb.auug.org.au/
Major changes:
mwifiex
* support for up to ten Authentication and Key Management (AKM) suites
* host MAC Sublayer Management Entity (MLME) client and AP mode support
* WPA-PSK-SHA256 AKM suite support
rtw88
* improve USB performance by aggregation
rtw89
* Wi-Fi 6 chip RTL8852BE-VT support
* WoWLAN net-detect support
* hardware encryption in unicast management frames support
* hardware rfkill support
ath12k
* DebugFS support for transmit DE stats
* Make ASPM support hardware-dependent
iwlwifi
* channel puncturing for US/CAN from UEFI
* bump FW API to 93 for BZ/SC devices
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbYfCARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt+Qwf/X9oQ4sf8jV6eOV7EhoWhIHnQadvo5YBZ
ulBm8In0QGjEOVWkI7kXGabKP5jhne2lVIyP1eFfP2/td/A2yDWIuEeBfDQD6f4K
aiUGAa1gs4ZtGKJBniw/ukflSqJlR99N2qBO5T/smDm3Nw/aC522SO7BoLTpoJDQ
SuW4atFHMShXYf/vIrAA2yB9ok2yw/QM+27M9qjj6D7zzqsQxDl9wKGW+2v8KiSa
rXXbfnwfaQP21CYv5xYbEPACSRSV5Dr0TNopivWYxmm9svjLzwFN2JM2fHPxBEDh
wP6Ojp+Z32c1VbQtclLrwIQdlZ5yhU5MEDlVg5VLym9F83hv+oXTbA==
=lgVx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d1 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b4 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a channel ctx is assigned to a link, we set the
LINK_CONTEXT_MODIFY_RATES_INFO to indicate that the rate fields are now
valid. But then we always take the rates of 2.4 GHz regardless of actual
used band.
This is because we are getting the band from bss_conf->chanctx_conf, but
this is assigned only after drv_assign_vif_chanctx returns, so we take
the bands of 2.4 GHz.
Fix it by taking the band from the iwl_mvm_link_info::phy_ctxt instead,
as this has already assigned in this point.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.11c2d3609609.I8fa59e29b6bb38e5d06f3536d54dfb2c5d5bab11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we de-activate a link because it started a CSA with mode=1, we want
to tell the firmware it can no longer transmit any frame for that link.
The firmware will do that on its own if the CSA indication (beacon /
action frame) was received on that same link, but with MLO, things got
more complex and the firmware can't track cross link CSA.
Tell the firmware if we de-activate a link because of CSA with mode=1 to
prevent it from transmitting, even if it is only an NDP PM=1 frame that
is part of the de-activation flow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.4bef89d438d4.If7147a7a84054e67c05414c753d73f4e2e0e6e37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The channel number is at the same position across all versions
of the channel description struct, so move it out of the union
that versions it. Also add __packed annotations to all of the
sub-structs and the union so it's packed correctly, and fully
document the structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.e31623ae4201.I1ea69a8ec3d39492f39d84e31fb105b159359c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We forgot to release the ROC reason for ESR prevention when the remain
on channel expires.
Add this.
Fixes: a1efeb8230 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.8f8765f359cc.I16fcd6198072d422ff36dce68070aafaf011f4c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta
pointer is not NULL.
It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is
dereferencing the ieee80211_sta pointer.
If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL
pointer.
Fix this by checking the sta pointer before retrieving the mvmsta
from it. If sta is not NULL, then mvmsta isn't either.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240825191257.880921ce23b7.I340052d70ab6d3410724ce955eb00da10e08188f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This shouldn't happen at all, since in station mode all MMPDUs
go through the TXQ for the STA, and not this function. There
may or may not be a race in mac80211 through which this might
happen for some frames while a station is being added, but in
that case we can also just drop the frame and pretend the STA
didn't exist yet.
Also, the code is simply wrong since it uses deflink, and it's
not easy to fix it since the mvmvif->ap_sta pointer cannot be
used without the mutex, and perhaps the right link might not
even be known.
Just drop the frame at that point instead of trying to fix it
up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb8854057ded03c7dc81d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This used to extract the timeout from the debug TLV
(FW_DBG_TRIGGER_TXQ_TIMERS), which is not in use.
Cleanup iwl_mvm_get_wd_timeout to not consider the debug TLV.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240808232017.7a6944bc2e38.I532b4b5487c6be9203ff4db9742d7cc5b148d502@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We used to have the opmode configuring it to the trans according to the
debug tlv value (FW_DBG_TRIGGER_TXQ_TIMERS).
But this debug is not used, so trans can just have the default value
hardcoded.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.87af3f063025.I2222981ead13f6a917f2d4b116c5b94200dc9e51@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When processing a MCC update notification from the firmware, if
the firmware indicates that the regulatory configuration didn't
change, abort the flow and do not notify higher layers.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.60dd273d00e0.I985b3bc61ca4a6cac7c1d1365b5c0afba04f3031@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If both links are missing 5 beacons, we need to exit EMLSR, if only one
link misses beacons, we need to wait until 11 beacons are missed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b7785943a4fe.I70a459c5e7db85f398d5795ba83bb15f65d6bf9d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the same handler for both types and just convert the old version to
the new. Drop the unused fields from the old one and fake the new
fields.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.a64ffc998569.I7d181052b1a69c331d07263f20c1e00cbc0bc891@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Note that the new API does not have the same notification ID as the
previous notification: the new notification belongs to the group 0x3.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.4ea52360b32e.Ibc25dcabd8aeadda906549482a6c77bc42fb55bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A new version is coming up. Rename the current struct to include the
current version.
s/iwl_missed_beacons_notif/iwl_missed_beacons_notif_v4
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b5c3a83a05ef.I698611582b5ca8395f42a535c51f7230307e2c6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the driver handles SMPS decisions by tracking AP
capabilities, BT coexistence changes, sending necessary SMPS
frames to the AP, and updating firmware with RX chain info
using the RLC_CONFIG_CMD.
Starting with version 3 of the RLC_CONFIG_CMD, the firmware
takes over this responsibility. It now tracks SMPS, sends
frames, and configures the RLC.
In this patch:
1. Stop sending RLC_CONFIG_CMD when firmware supports RLC
offload (version 3), as rlc.rx_chain_info is not needed by
firmware, and no other field in the cmd is used.
2. Prevent the driver from forwarding any SMPS requests to
mac80211, i.e., the driver should not transmit SMPS frames
to the AP as firmware handles that.
3. Set NL80211_FEATURE_DYNAMIC_SMPS and NL80211_FEATURE_STATIC_SMPS
conditionally based on RLC version.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45da23be1f65.I0d46db82dd990a82e8a66876fe2f5310bc9513be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add prints of the per-link MPDU counters, and change the other MPDU
counters related prints to use DL_INFO, which is already used for all
EMLSR tests anyway, instead of DL_STATS which pollutes the logs with all
the RX signal info.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Link: https://patch.msgid.link/20240729201718.02bd85837c87.I85480c9c4fab0f7a574dd69cbeafd82674146921@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have a new notification the BT profile. It contains almost nothing,
only the wifi loss information. Copy this into mvm. We still need to
iterate over the vifs / links to use this data.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.637499f3a85a.I8bf654cf5d8aa038100273876c936845ecc338f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_bt_coex_profile_notif is now being obsoleted. It'll be replaced
by a new notification coming with a non-legacy group. Rename it to avoid
confusion.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.dc29fd0d7817.I5881fce86ec8b76ae98d2948265434b8e7d860c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The algo running in fw may take a little longer than 5 milliseconds,
(e.g. measurement on 80MHz while associated). Increase the minimum
time between measurements to 7 milliseconds.
Fixes: 830aa3e7d1 ("iwlwifi: mvm: add support for range request command version 13")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The cipher pointer is not set, but is derefereced trying to set its
content, which leads to a NULL pointer dereference.
Fix it by pointing to the cipher parameter before dereferencing.
Fixes: 626be4bf99 ("wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parameters")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.24e83369f136.I80501ddcb82920561f450d00020d860e7a3f90c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the upper layer requests to cancel an ongoing scan, a race
is possible in which by the time the driver starts to handle the
upper layers scan cancel flow, the FW already completed handling
the scan request and the driver received the scan complete
notification but still did not handle the notification. In such a
case the FW will simply ignore the scan abort request coming from
the driver, no notification would arrive from the FW and the entire
abort flow would be considered a failure.
To better handle this, check the status code returned by the FW for
the scan abort command. In case the status indicates that
no scan was aborted, complete the scan abort flow with success, i.e.,
the scan was aborted, as the flow is expected to consume the scan
complete notification.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware needs to know what we had in the HE CAP, propagate that
setting to the firmware through the LINK command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.fef270d2995b.I328237837df30e1cb98764987eaaf8e8993e058c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SAP version 4 uses larger Host to MEI notification queue.
Since it is unknown which SAP version is used by the CSME firmware
when the driver loads, try version 4 first. In case the CSME firmware
uses version 3, the memory allocation will fail. In this case the
driver will try again to allocate the memory for version 3.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.8372e040282f.Ia0085784e08a35159c9293f986c3d2774038f4c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The 'gl' devices are in the bz family, but they're not,
integrated, so should have their own trans config struct.
Fix that, also necessitating the removal of LTR config,
and while at it remove 0x2727 and 0x272D IDs that were
only used for test chips.
Fixes: c30a2a6478 ("wifi: iwlwifi: add a new PCI device ID for BZ device")ticket=none
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.95aed0620080.Ib9129512c95aa57acc9876bdff8b99dd41e1562c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We may want to know the value of this register for certain
debug scenarios before we overwrite it, it indicates which
parts of the chip have recently been reset.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.737e5f8bb8df.Ia3f3637ac4a0fb4b35ffd652f92eb75de652ee12@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the cases changed here, key iteration isn't done from
an RCU critical section, but rather using the wiphy lock
as protection. Therefore, just use ieee80211_iter_keys().
The link switch case can therefore also use sync commands.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.69a2d18580c1.I2148e04d4b467d0b100beac8f7e449bfaaf775a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
