This driver often takes on the order of 10ms to start, but in some cases
as much as 600ms [1]. It shouldn't have many cross-device dependencies
to race with, nor racy access to shared state with other drivers, so
this should be a relatively low risk change.
This driver was pinpointed as part of a survey of top slowest initcalls
(i.e., are built in, and probing synchronously) on a lab of ChromeOS
systems.
[1] 600ms was especially surprising to me, so I checked a little deeper.
This driver is used to interface with Embedded Controllers besides just
the traditional laptop power-state controller -- it also interfaces with
some fingerprint readers, which may start up in parallel with the
kernel, or which may not even be present on some SKUs, despite having a
node for it. Thus, our time is wasted just timing out talking to it. At
least we can do that without blocking everyone else.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221101152132.v2.5.Ia458a69e1d592bfa4f04cde7018bbc7486f91a23@changeid
This driver takes on the order of 15ms to start on some systems. Even on
systems where there is no lightbar support, it can take a few
milliseconds just to probe the EC for support. It shouldn't have many
cross-device dependencies to race with, nor racy access to shared state
with other drivers, so this should be a relatively low risk change.
This driver was pinpointed as part of a survey of top slowest initcalls
(i.e., are built in, and probing synchronously) on a lab of ChromeOS
systems.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221101152132.v2.4.I565598102e0bfb03bdf8c090d3bfdf954d026bc5@changeid
This driver takes on the order of 40ms to start on some systems. It
shouldn't have many cross-device dependencies to race with, nor racy
access to shared state with other drivers, so this should be a
relatively low risk change.
This driver was pinpointed as part of a survey of top slowest initcalls
(i.e., are built in, and probing synchronously) on a lab of ChromeOS
systems.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221101152132.v2.3.Ic9a4f378f73319da323cd55940012fa6b1de24f4@changeid
Disregarding the weird global state hiding in this cros_ec_lpc_mec_*()
stuff, it belongs in device probe. We shouldn't assume we can access
hardware resources when the device isn't attached to the driver.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221101152132.v2.1.I0728421299079b104710c202d5d7095b2674fd8c@changeid
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/8d66b4688c05a44b592a4d20e2660e9067163276.1667336095.git.christophe.jaillet@wanadoo.fr
Commit ed5c2f5fd1 ("i2c: Make remove callback return void") changed
the return type of the 'remove' callback to void, but this driver was
originally written before that change landed. Update the remove callback
to match.
Fixes: 5f9952548d ("platform/chrome: add a driver for HPS")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Callaghan <dcallagh@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221018235237.2274969-1-dcallagh@chromium.org
This patch introduces a driver for the ChromeOS human presence
sensor (aka. HPS). The driver supports a sensor connected to the I2C bus
and identified as "GOOG0020" in the ACPI tables.
When loaded, the driver exports the sensor to userspace through a
character device. This device only supports power management, i.e.,
communication with the sensor must be done through regular I2C
transmissions from userspace.
Power management is implemented by enabling the respective power GPIO
while at least one userspace process holds an open fd on the character
device. By default, the device is powered down if there are no active
clients.
Note that the driver makes no effort to preserve the state of the sensor
between power down and power up events. Userspace is responsible for
reinitializing any needed state once power has been restored.
The device firmware, I2C protocol and other documentation is available
at https://chromium.googlesource.com/chromiumos/platform/hps-firmware.
Co-developed-by: Sami Kyöstilä <skyostil@chromium.org>
Signed-off-by: Sami Kyöstilä <skyostil@chromium.org>
Signed-off-by: Dan Callaghan <dcallagh@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221018040623.2173441-1-dcallagh@chromium.org
cros_ec_proto:
* Fix protocol failure if EC firmware jumps to RO part.
cros_typec_switch:
* Add USB Type-C switch driver for mode switches and retimers.
* Integrate to EC for retimers, status update, and mode switches.
* Clean-ups.
cros_ec_typec:
* Clean-ups.
* Use partner PDOs to register USB PD capabilities.
chromeos_laptop:
* Fix a double-free.
cros_ec_chardev:
* Check data length from userland to avoid a memory corruption.
cros_ec:
* Expose suspend_timeout_ms in debugfs.
* Notify the PM about wake events during resume.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCYzut7RMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz011UA/ioEJfKhK0HT4uwe6TfW6hAtmnk4ZipR
Q7dTPH272723AP47SkcfYJK/GxBV9GIxyqOqfnhbFaxWu6fid2a4D8UCAw==
=/Xux
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec_proto:
- Fix protocol failure if EC firmware jumps to RO part
cros_typec_switch:
- Add USB Type-C switch driver for mode switches and retimers
- Integrate to EC for retimers, status update, and mode switches
- Clean-ups
cros_ec_typec:
- Clean-ups
- Use partner PDOs to register USB PD capabilities
chromeos_laptop:
- Fix a double-free
cros_ec_chardev:
- Check data length from userland to avoid a memory corruption
cros_ec:
- Expose suspend_timeout_ms in debugfs
- Notify the PM about wake events during resume"
* tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Notify the PM of wake events during resume
platform/chrome: cros_ec_typec: Register partner PDOs
platform/chrome: cros_typec_switch: Inline DRV_NAME
platform/chrome: cros_typec_switch: Use PTR_ERR_OR_ZERO() to simplify
platform/chrome: cros_typec_switch: Remove impossible condition
platform/chrome: cros_typec_switch: Add missing newline on printk
platform/chrome: cros_ec_typec: Correct alt mode index
platform/chrome: cros_ec_typec: Add bit offset for DP VDO
platform/chrome: cros_ec: Expose suspend_timeout_ms in debugfs
platform/chrome: fix memory corruption in ioctl
platform/chrome: fix double-free in chromeos_laptop_prepare()
platform/chrome: cros_ec_typec: Get retimer handle
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_typec_switch: Register mode switches
platform/chrome: cros_typec_switch: Add event check
platform/chrome: cros_typec_switch: Set EC retimer
platform/chrome: cros_typec_switch: Add switch driver
platform/chrome: Add Type-C mux set command definitions
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
cros_ec_handle_event in the cros_ec driver can notify the PM of wake
events. When a device is suspended, cros_ec_handle_event will not check
MKBP events. Instead, received MKBP events are checked during resume by
cros_ec_report_events_during_suspend. But
cros_ec_report_events_during_suspend cannot notify the PM if received
events are wake events, causing wake events to not be reported if
received while the device is suspended.
Update cros_ec_report_events_during_suspend to notify the PM of wake
events during resume by calling pm_wakeup_event.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220913204954.2931042-1-jthies@google.com
The ChromeOS EC exports partner source/sink cap PDOs (Power Data
Objects) to the application processor (AP). Use this information
to register USB PD (Power Delivery) capabilities with the
USB Type-C Power Delivery device class.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220830202018.1884851-1-pmalani@chromium.org
[pmalani: Remove extra newline nit from original patch]
This macro is only used one place, let's inline it instead to save a
line or two.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220830225831.2362403-5-swboyd@chromium.org
Use the standard error pointer macro to shorten the code and simplify.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220830225831.2362403-4-swboyd@chromium.org
The type of 'index' is unsigned long long, which can't possibly be less
than zero. Remove the impossible check.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220830225831.2362403-3-swboyd@chromium.org
Alt mode indices used by USB PD (Power Delivery) start with 1, not 0.
Update the alt mdoe registration code to factor this in to the alt mode
descriptor.
Fixes: de0f49487d ("platform/chrome: cros_ec_typec: Register partner altmodes")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220819190807.1275937-3-pmalani@chromium.org
Use the right macro while constructing the DP_PORT_VDO to ensure the Pin
Assignment offsets are correct.
Fixes: 1ff5d97f07 ("platform/chrome: cros_ec_typec: Register port altmodes")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220819190807.1275937-2-pmalani@chromium.org
In modern Chromebooks, the embedded controller has a mechanism where
it will watch a hardware-controlled line that toggles in suspend, and
wake the system up if an expected sleep transition didn't occur. This
can be very useful for detecting power management issues where the
system appears to suspend, but doesn't actually reach its lowest
expected power states.
Sometimes it's useful in debug and test scenarios to be able to control
the duration of that timeout, or even disable the EC timeout mechanism
altogether. Add a debugfs control to set the timeout to values other
than the EC-defined default, for more convenient debug and
development iteration.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220822144026.v3.1.Idd188ff3f9caddebc17ac357a13005f93333c21f@changeid
[tzungbi: fix one nit in Documentation/ABI/testing/debugfs-cros-ec.]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption.
Fixes: eda2e30c66 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yv8dpCFZJdbUT5ye@kili
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8 ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
Where available, obtain the handle to retimer switch specified via
firmware, and update the mux configuration callsites to add retimer
support for supported modes.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-8-pmalani@chromium.org
Some of the return paths for the cros_typec_get_switch_handles()
aren't necessary. Clean up the return paths to only undo the handle
get's which succeeded.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-7-pmalani@chromium.org
Register mode switch devices for Type-C connectors, when they are
specified by firmware. These control Type-C configuration for any USB
Type-C mode switches (sometimes known as "muxes") which are controlled
by the ChromeOS EC.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-6-pmalani@chromium.org
The ChromeOS EC updates Type-C status events when mux set requests from
the Application Processor (AP) are completed. Add a check to the
flow of configuring muxes to look for this status done bit, so that
the driver is aware that the mux set completed successfully or not.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-5-pmalani@chromium.org
Invoke ChromeOS EC host commands to set EC-controlled retimer switches
to the state the Type-C framework instructs.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-4-pmalani@chromium.org
Introduce a driver to configure USB Type-C mode switches and retimers
which are controlled by the ChromeOS EC (Embedded Controller).
This allows Type-C port drivers, as well as alternate mode drivers to
configure their relevant mode switches and retimers according to the
Type-C state they want to achieve.
ACPI devices with ID GOOG001A will bind to this driver.
Currently, we only register a retimer switch with a stub set function.
Subsequent patches will implement the host command set functionality,
and introduce mode switches.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-3-pmalani@chromium.org
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.
Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.
The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.
Fixes: 3300fdd630 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
Merge CROS_KUNIT and CROS_EC_PROTO_KUNIT_TEST so that when they're built
as modules cros_kunit_util doesn't need to export the symbols.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220720044754.4026295-2-tzungbi@kernel.org
drivers/platform/chrome/cros_kbd_led_backlight.c got a new build warning
when using the randconfig in [1]:
>>> warning: unused variable 'keyboard_led_drvdata_ec_pwm'
The warning happens when CONFIG_CROS_EC is set but CONFIG_OF is not set.
Reproduce:
- mkdir build_dir
- wget [1] -O build_dir/.config
- COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 \
O=build_dir ARCH=s390 SHELL=/bin/bash drivers/platform/chrome/
Fix the warning by using __maybe_unused. Also use IS_ENABLED() because
CROS_EC is a tristate.
[1]: https://download.01.org/0day-ci/archive/20220717/202207170538.MR39dw8m-lkp@intel.com/config
Fixes: 40f5814374 ("platform/chrome: cros_kbd_led_backlight: support EC PWM backend")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718105047.2356542-1-tzungbi@kernel.org
cros_ec_check_features() gets EC features if it hasn't had cache, and
checks whether the given EC_FEATURE_* is supported or not.
Add Kunit tests for cros_ec_check_features().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220622041040.202737-6-tzungbi@kernel.org
cros_ec_cmd_xfer_status() is the only exported function that calls
static function cros_ec_map_error().
Add Kunit test for cros_ec_map_error() through calling
cros_ec_cmd_xfer_status().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220622041040.202737-3-tzungbi@kernel.org
cros_ec_cmd_xfer_status() calls cros_ec_cmd_xfer() and cros_ec_map_error().
Given that there are already test cases for cros_ec_cmd_xfer(), only add
basic Kunit tests for cros_ec_cmd_xfer_status().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220622041040.202737-2-tzungbi@kernel.org
cros_ec_wait_until_complete() sends EC_CMD_GET_COMMS_STATUS which expects
to receive sizeof(struct ec_response_get_comms_status) from
cros_ec_xfer_command().
Add Kunit test and expect to receive an error code when
cros_ec_xfer_command() returns 0.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-10-tzungbi@kernel.org
While EC_COMMS_STATUS_PROCESSING flag is still on after it tries
EC_COMMAND_RETRIES times for sending EC_CMD_GET_COMMS_STATUS,
cros_ec_wait_until_complete() doesn't return an error code.
Return -EAGAIN in the case instead.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-9-tzungbi@kernel.org
While EC_COMMS_STATUS_PROCESSING flag is still on after it tries
EC_COMMAND_RETRIES times for sending EC_CMD_GET_COMMS_STATUS,
cros_ec_wait_until_complete() doesn't return an error code.
Change the expectation to an error code.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-8-tzungbi@kernel.org
EC returns EC_RES_IN_PROGRESS if the host command needs more time to
complete. Whenever receives the return code, cros_ec_send_command()
sends EC_CMD_GET_COMMS_STATUS to query the command status.
Separate cros_ec_wait_until_complete() from cros_ec_send_command().
It sends EC_CMD_GET_COMMS_STATUS and waits until the previous command
was completed, or encountered error, or timed out.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-7-tzungbi@kernel.org
cros_ec_send_command() has extra logic to handle EC_RES_IN_PROGRESS.
Separate the command transfer part into cros_ec_xfer_command() so
that other functions can re-use it.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-6-tzungbi@kernel.org
cros_ec_cmd_xfer() is the only exported function that calls static
function cros_ec_send_command().
Add Kunit tests for cros_ec_send_command() through calling
cros_ec_cmd_xfer().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-5-tzungbi@kernel.org
cros_ec_cmd_xfer() transfers the given command and data if any. It
performs some sanity checks and calls cros_ec_send_command().
Add Kunit tests for cros_ec_cmd_xfer().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-4-tzungbi@kernel.org
Instead of using manually managed altmode structs, register the port's
altmodes with the Type-C framework. This facilitates matching them to
partner altmodes later.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220712210318.2671292-2-pmalani@chromium.org
Rename "p_altmode" to "port_altmode" which is a less ambiguous name for
the port_altmode struct array.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220712210318.2671292-1-pmalani@chromium.org
The typec_register_port() can fail with EPROBE_DEFER if the endpoint
node hasn't probed yet. In order to avoid spamming the log with errors
in that case, log using dev_err_probe().
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220712214554.545035-1-nfraprado@collabora.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
The last resume result exposing logic in cros_ec_sleep_event()
incorrectly requires S0ix support, which doesn't work on ARM based
systems where S0ix doesn't exist. That's because cros_ec_sleep_event()
only reports the last resume result when the EC indicates the last sleep
event was an S0ix resume. On ARM systems, the last sleep event is always
S3 resume, but the EC can still detect sleep hang events in case some
other part of the AP is blocking sleep.
Always expose the last resume result if the EC supports it so that this
works on all devices regardless of S0ix support. This fixes sleep hang
detection on ARM based chromebooks like Trogdor.
Cc: Rajat Jain <rajatja@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Fixes: 7235560ac7 ("platform/chrome: Add support for v1 of host sleep event")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220614075726.2729987-1-swboyd@chromium.org
cros_ec_get_host_event_wake_mask() expects to receive
sizeof(struct ec_response_host_event_mask) from send_command(). The
payload is valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in
cros_ec_get_host_event_wake_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-22-tzungbi@kernel.org
cros_ec_get_host_event_wake_mask() expects to receive
sizeof(struct ec_response_host_event_mask) from send_command().
The payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_host_event_wake_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-21-tzungbi@kernel.org
cros_ec_get_host_event_wake_mask() used to return value from
send_command() which is number of bytes for input payload on success
(i.e. sizeof(struct ec_response_host_event_mask)).
However, the callers don't need to know how many bytes are available.
Don't return number of available bytes. Instead, return 0 on success;
otherwise, negative integers on error.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-20-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() expects to receive
sizeof(struct ec_response_get_cmd_versions) from send_command(). The
payload is valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in
cros_ec_get_host_command_version_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-19-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() expects to receive
sizeof(struct ec_response_get_cmd_versions) from send_command().
The payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_host_command_version_mask().
Note that because the 2 cros_ec_get_host_command_version_mask() use the
same `ver_mask`. cros_ec_proto_test_query_all_no_host_sleep_return0()
polluates the `ver_mask` and returns 0 on the second send_command() to
make sure the second cros_ec_get_host_command_version_mask() doesn't
take the garbage from the previous call.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-18-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() should check if EC wasn't happy
by checking `msg->result`.
Use cros_ec_map_error() and return the error code if any.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-17-tzungbi@kernel.org
cros_ec_query_all() uses cros_ec_get_host_command_version_mask() to
query the supported MKBP version; cros_ec_get_host_command_version_mask()
uses send_command() for transferring the host command.
Returning >=0 from send_command() only denotes the transfer was success.
cros_ec_get_host_command_version_mask() should check if EC wasn't happy
by checking `msg->result`.
Add a Kunit test for returning error in `msg->result` in
cros_ec_get_host_command_version_mask(). For the case,
cros_ec_query_all() should find the EC device doesn't support MKBP.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-16-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() used to return value from
send_command() which is number of available bytes for input payload on
success (i.e. sizeof(struct ec_response_get_cmd_versions)).
However, the callers don't need to know how many bytes are available.
Don't return number of available bytes. Instead, return 0 on success;
otherwise, negative integers on error.
Also remove the unneeded `ver_mask` initialization as the callers should
take it only if cros_ec_get_host_command_version_mask() returns 0.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-15-tzungbi@kernel.org
It wrongly showed the following message when it doesn't support MKBP:
"MKBP support version 4294967295".
Fix it.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-14-tzungbi@kernel.org
cros_ec_get_proto_info_legacy() expects to receive
sizeof(struct ec_response_hello) from send_command(). The payload is
valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in
cros_ec_get_proto_info_legacy().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-13-tzungbi@kernel.org
cros_ec_get_proto_info_legacy() expects to receive
sizeof(struct ec_response_hello) from send_command(). The payload is
valid only if the return value is positive.
Add a Kunit test for returning 0 from send_command() in
cros_ec_get_proto_info_legacy().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-12-tzungbi@kernel.org
Rename cros_ec_host_command_proto_query_v2() to
cros_ec_get_proto_info_legacy() and make it responsible for setting
`ec_dev` fields for EC protocol v2.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-11-tzungbi@kernel.org
cros_ec_get_proto_info() expects to receive
sizeof(struct ec_response_get_protocol_info) from send_command(). The
payload is valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in cros_ec_get_proto_info().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-10-tzungbi@kernel.org
cros_ec_get_proto_info() expects to receive
sizeof(struct ec_response_get_protocol_info) from send_command(). The
payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_proto_info().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-9-tzungbi@kernel.org
Rename cros_ec_host_command_proto_query() to cros_ec_get_proto_info()
and make it responsible for setting `ec_dev` fields according to the
response protocol info.
Also make cros_ec_get_host_event_wake_mask() allocate its own message
buffer. It was lucky that size of `struct ec_response_host_event_mask`
is less than `struct ec_response_get_protocol_info`. Thus, the buffer
wasn't overflow.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-8-tzungbi@kernel.org
Use cros_ec_map_error() in cros_ec_get_host_event_wake_mask().
The behavior of cros_ec_get_host_event_wake_mask() slightly changed. It
is acceptable because the caller only needs it returns negative integers
for indicating errors. Especially, the EC_RES_INVALID_COMMAND still
maps to -EOPNOTSUPP.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-7-tzungbi@kernel.org
`din_size` is calculated from `ec_dev->max_response`.
`ec_dev->max_response` is further calculated from the protocol info.
To make it clear, assign `din_size` and `dout_size` from protocol info
directly.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-5-tzungbi@kernel.org
Move passthru indexes for EC and PD devices to common header. Also use
them instead of literal constants.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-4-tzungbi@kernel.org
For letting device tree based machines to use the driver, support OF match.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220523090822.3035189-5-tzungbi@kernel.org
cros_kbd_led_backlight uses ACPI_KEYBOARD_BACKLIGHT_WRITE and
ACPI_KEYBOARD_BACKLIGHT_READ for setting and getting the brightness
respectively.
Separate ACPI operations for preparing the driver to support other
backends.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220523090822.3035189-3-tzungbi@kernel.org
cros_ec_cmd() takes 2 size arguments. Update them to be of the more
appropriate type size_t.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220606201825.763788-4-pmalani@chromium.org
cros_ec_command() is the name of a function as well as a struct, as such
it can confuse indexing tools (like ctags). Avoid this by renaming it to
cros_ec_cmd(). Update all the callsites to use the new name.
This patch is a find-and-replace, so should not introduce any functional
changes.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220606201825.763788-3-pmalani@chromium.org
cros_ec_check_result() is used to check if the EC communication success but
EC responded EC_RES_IN_PROGRESS. It should return 0 even if EC wasn't
happy about the host command.
Add Kunit tests for cros_ec_check_result().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220518091814.2028579-5-tzungbi@kernel.org
cros_ec_prepare_tx() mixed the code for both versions. To be neat and to
make it clear, factor the legacy part out as a separate function, rename
the function, and update the comments.
Specifically,
- prepare_tx(), for current protocol version (i.e. 3).
- prepare_tx_legacy(), for protocol version <= 2.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220518091814.2028579-3-tzungbi@kernel.org
cros_ec_prepare_tx() is used to fill the protocol headers according to
the requested protocol version.
Add Kunit tests cros_ec_prepare_tx() for each version.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220518091814.2028579-2-tzungbi@kernel.org
It is overkill to crash the kernel if the `din` buffer is going to full
or overflow.
Drop the BUG_ON() and return -EINVAL instead.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-8-tzungbi@kernel.org
In the context, the following conditions are always false:
- `todo` < 0
Suppose that EC_SPI_FRAME_START is found at the last byte of transfer.
In the case, `ptr` == `end` - 1. As a result, `todo` must be 0.
- `todo` > `ec_dev->din_size`
Suppose that there is no preamble bytes. EC_SPI_FRAME_START is found at
the first byte of transfer.
In the case, `end` == `ptr` + EC_MSG_PREAMBLE_COUNT.
As a result, `todo` == EC_MSG_PREAMBLE_COUNT - 1.
However, it already checked `ec_dev->din_size` < EC_MSG_PREAMBLE_COUNT at
the beginning of function.
Drop the unneeded BUG_ON().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-7-tzungbi@kernel.org
It is overkill to crash the kernel if the given message is oversize.
Drop the BUG_ON() and return -EINVAL instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-6-tzungbi@kernel.org
It is overkill to crash the kernel if the `ec_dev` doesn't support MKBP
event but gets called into cros_ec_get_host_event().
Drop the BUG_ON() and return error (0 in the case) instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-5-tzungbi@kernel.org
It is overkill to crash the kernel if the given message is oversize.
Drop the BUG_ON() and return -EINVAL instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-4-tzungbi@kernel.org
cros_ec_prepare_tx() returns either:
- >= 0 for number of prepared bytes.
- < 0 for -errno.
Correct the comment and make sure all callers check the return code.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-3-tzungbi@kernel.org
prepare_packet() gets called if `ec_dev->proto_version` > 2. For now, it
must be equivalent to EC_HOST_REQUEST_VERSION.
Drop the BUG_ON().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-2-tzungbi@kernel.org
The x86 Chromebooks have the ChromeOS ACPI device. This driver attaches
to the ChromeOS ACPI device and exports the values reported by ACPI in a
sysfs directory. This data isn't present in ACPI tables when read
through ACPI tools, hence a driver is needed to do it. The driver gets
data from firmware using the ACPI component of the kernel. The ACPI values
are presented in string form (numbers as decimal values) or binary
blobs, and can be accessed as the contents of the appropriate read only
files in the standard ACPI device's sysfs directory tree. This data is
consumed by the ChromeOS user space.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yn4OKYrtV35Dv+nd@debian-BULLSEYE-live-builder-AMD64
The EC driver may not be initialized when cros_typec_probe is called,
particulary when CONFIG_CROS_EC_CHARDEV=m.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220404041101.6276-1-akihiko.odaki@gmail.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Some ChromeOS EC devices (such as the Framework Laptop) only map I/O
ports 0x800-0x807. Making the larger reservation required by the non-MEC
LPC (the 0xFF ports for the memory map, and the 0xFF ports for the
parameter region) is non-viable on these devices.
Since we probe the MEC EC first, we can get away with a smaller
reservation that covers the MEC EC ports. If we fall back to classic
LPC, we can grow the reservation to cover the memory map and the
parameter region.
cros_ec_lpc_probe also interacted with I/O ports 0x800-0x807 without a
reservation. Restructuring the code to request the MEC LPC region first
obviates the need to do so.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220217165930.15081-3-dustin@howett.net
The Framework Laptop identifies itself in DMI with manufacturer
"Framework" and product "Laptop".
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220217165930.15081-2-dustin@howett.net
Commit 413dda8f2c ("platform/chrome: cros_ec_chardev: Use
cros_ec_cmd_xfer_status helper") inadvertendly changed the userspace ABI.
Previously, cros_ec ioctls would only report errors if the EC communication
failed, and otherwise return success and the result of the EC
communication. An EC command execution failure was reported in the EC
response field. The above mentioned commit changed this behavior, and the
ioctl itself would fail. This breaks userspace commands trying to analyze
the EC command execution error since the actual EC command response is no
longer reported to userspace.
Fix the problem by re-introducing the cros_ec_cmd_xfer() helper, and use it
to handle ioctl messages.
Fixes: 413dda8f2c ("platform/chrome: cros_ec_chardev: Use cros_ec_cmd_xfer_status helper")
Cc: Daisuke Nojiri <dnojiri@chromium.org>
Cc: Rob Barnes <robbarnes@google.com>
Cc: Rajat Jain <rajatja@google.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Parth Malkan <parthmalkan@google.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
`wake_enabled` indicates cros_ec_resume() needs to call
disable_irq_wake() to undo enable_irq_wake() in cros_ec_suspend().
Determine `wake_enabled` in cros_ec_suspend() instead of
reset-after-used in cros_ec_resume().
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fix cros_ec_register() to unregister platform devices if
blocking_notifier_chain_register() fails.
Also use the single exit path to handle the platform device
unregistration.
Fixes: 42cd0ab476 ("platform/chrome: cros_ec: Query EC protocol version if EC transitions between RO/RW")
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
cros_ec_typec:
* platform/chrome: cros_ec_typec: Check for EC device - Fix a crash when using
the cros_ec_typec driver on older hardware not capable of typec commands.
* Make try power role optional.
* Mux configuration reorganization series from Prashant.
cros_ec_debugfs:
* Fix use after free. Thanks Tzung-bi.
sensorhub:
* cros_ec_sensorhub fixup - Split trace include file
misc:
* Add new mailing list for chrome-platform development.
chrome-platform@lists.linux.dev. Now with patchwork!
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYkZBeAAKCRBzbaomhzOw
wuUbAP9GaC3906dMf4zucME+icojYFQSeQFMJfS0kMdKBtJROAEArsEilx5aFf7Q
PlyoaaJ7aWpLO3pnUdUNwQM0hJPLGwo=
=me9M
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
Debugfs console_log uses devm memory (e.g. debug_info in
cros_ec_console_log_poll()). However, lifecycles of device and debugfs
are independent. An use-after-free issue is observed if userland
program operates the debugfs after the memory has been freed.
The call trace:
do_raw_spin_lock
_raw_spin_lock_irqsave
remove_wait_queue
ep_unregister_pollwait
ep_remove
do_epoll_ctl
A Python example to reproduce the issue:
... import select
... p = select.epoll()
... f = open('/sys/kernel/debug/cros_scp/console_log')
... p.register(f, select.POLLIN)
... p.poll(1)
[(4, 1)] # 4=fd, 1=select.POLLIN
[ shutdown cros_scp at the point ]
... p.poll(1)
[(4, 16)] # 4=fd, 16=select.POLLHUP
... p.unregister(f)
An use-after-free issue raises here. It called epoll_ctl with
EPOLL_CTL_DEL which in turn to use the workqueue in the devm (i.e.
log_wq).
Detaches log reader's workqueue from devm to make sure it is persistent
even if the device has been removed.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Link: https://lore.kernel.org/r/20220209051130.386175-1-tzungbi@google.com
Signed-off-by: Benson Leung <bleung@chromium.org>
cros_ec_trace.h defined 5 tracing events, 2 for cros_ec_proto and
3 for cros_ec_sensorhub_ring.
These 2 files are in different kernel modules, the traces are defined
twice in the kernel which leads to problem enabling only some traces.
Move sensorhub traces from cros_ec_trace.h to cros_ec_sensorhub_trace.h
and enable them only in cros_ec_sensorhub kernel module.
Check we can now enable any single traces: without this patch,
we can only enable all sensorhub traces or none.
Fixes: d453ceb654 ("platform/chrome: sensorhub: Add trace events for sample")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220122001301.640337-1-gwendal@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device
-----BEGIN PGP SIGNATURE-----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=uRsT
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
In cros_typec_remove_partner(), we call
cros_typec_usb_disconnect_state() which sets the switches/muxes to be in
a disconnected state. This also happens in cros_typec_configure_mux().
However, unlike there, here the mux_flags variable hasn't been updated
to reflect that a disconnection has occurred. Update the flag here
accordingly.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/chrome-platform/20220208184721.1697194-5-pmalani@chromium.org/
There are situations where the mux state reported by the Embedded
Controller (EC), might lag the partner "connected" state. So, the mux
state might still suggest that a partner is connected, while the PD
"connected" state, being in Try.SNK (for example) suggests that the
partner is disconnected.
In such a scenario, we will end up sending a disconnect command to the
mux driver, followed by a connect command, since the mux is configured
later. Avoid this by configuring the mux before
registering/disconnecting a partner.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/chrome-platform/20220208184721.1697194-4-pmalani@chromium.org/
Move the function which gets current mux state inside the
cros_typec_configure_mux() function. It is better to group those
bits of functionality together, and it makes it easier to move around
cros_typec_configure_mux() later.
While we are doing this, also inline the cros_typec_get_mux_info() inside
of cros_typec_configure_mux().
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/chrome-platform/20220208184721.1697194-3-pmalani@chromium.org/
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Up to now cros_ec_unregister() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c, platform and spi remove callbacks is
ignored anyway.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20211020071753.wltjslmimb6wtlp5@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The Type C ACPI device on older Chromebooks is not generated correctly
(since their EC firmware doesn't support the new commands required). In
such cases, the crafted ACPI device doesn't have an EC parent, and it is
therefore not useful (it shouldn't be generated in the first place since
the EC firmware doesn't support any of the Type C commands).
To handle devices which use these older firmware revisions, check for
the parent EC device handle, and fail the probe if it's not found.
Fixes: fdc6b21e24 ("platform/chrome: Add Type C connector class driver")
Reported-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Tested-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20220126190219.3095419-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Some boards prefer not to specify a try-power-role. Update the port
property parsing logic to not error out in case a try-power-role is not
specified.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/chrome-platform/20220127191659.3560810-1-pmalani@chromium.org/
This adds the ACPI driver for the ChromeOS privacy screen that is
present on some chromeos devices.
Note that ideally, we'd want this privacy screen driver to be probed
BEFORE the drm probe in order to avoid a drm probe deferral:
https://hansdegoede.livejournal.com/25948.html
In practise, I found that ACPI drivers are bound to their devices AFTER
the drm probe on chromebooks. So on chromebooks with privacy-screen,
this patch along with the other one in this series results in a probe
deferral of about 250ms for i915 driver. However, it did not result in
any user noticeable delay of splash screen in my personal experience.
In future if this probe deferral turns out to be an issue, we can
consider turning this ACPI driver into something that is probed
earlier than the drm drivers.
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107190208.95479-2-rajatja@google.com
Pull HID fixes from Jiri Kosina:
- fix for Intel-ISH driver to make sure it gets aoutoloaded only on
matching devices and not universally (Thomas Weißschuh)
- fix for Wacom driver reporting invalid contact under certain
circumstances (Jason Gerecke)
- probing fix for ft260 dirver (Michael Zaidman)
- fix for generic keycode remapping (Thomas Weißschuh)
- fix for division by zero in hid-magicmouse (Claudia Pellegrino)
- other tiny assorted fixes and new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Fix Iiyama ProLite T1931SAW (0eef:0001 again!)
HID: nintendo: eliminate dead datastructures in !CONFIG_NINTENDO_FF case
HID: magicmouse: prevent division by 0 on scroll
HID: thrustmaster: fix sparse warnings
HID: Ignore battery for Elan touchscreen on HP Envy X360 15-eu0xxx
HID: input: set usage type to key on keycode remap
HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fields
HID: ft260: fix i2c probing for hwmon devices
Revert "HID: hid-asus.c: Maps key 0x35 (display off) to KEY_SCREENLOCK"
HID: intel-ish-hid: fix module device-id handling
mod_devicetable: fix kdocs for ishtp_device_id
HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
HID: nintendo: unlock on error in joycon_leds_create()
platform/x86: isthp_eclite: only load for matching devices
platform/chrome: chros_ec_ishtp: only load for matching devices
HID: intel-ish-hid: hid-client: only load for matching devices
HID: intel-ish-hid: fw-loader: only load for matching devices
HID: intel-ish-hid: use constants for modaliases
HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()
A late addititon to the intel-ish-hid framework caused a build failure
with clang, and introduced an ABI to the module loader that stops working
if any driver ever needs to bind to more than one UUID:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:1067:4: error: initializer element is not a compile-time constant
Change the ishtp_device_id to have correct documentation and a driver_data
field like all the other ones, and change the drivers to use the ID table
as the primary identification in a way that works with all compilers
and avoids duplciating the identifiers.
Fixes: f155dfeaa4 ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fd ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb8 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Fixes: cb1a2c6847 ("HID: intel-ish-hid: use constants for modaliases")
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[jkosina@suse.cz: fix ecl_ishtp_cl_driver.id initialization]
[jkosina@suse.cz: fix conflict with already fixed kerneldoc]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the existing cros_ec_command() for cros_ec_check_features(). This
eliminates an unnecessary duplication of the memory allocation/free and
memory copy code.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20211004170716.86601-2-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
The Chrome EC's features are returned through an
ec_response_get_features struct, but they are stored in an independent
array. Although the two are effectively the same at present (2 unsigned
32 bit ints), there is the possibility that they could go out of sync.
Avoid this by only using the EC struct to store the features.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20211004170716.86601-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Add a version parameter to cros_ec_command() for callers that may want
to specify which version of the host command they would like to use.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-5-pmalani@chromium.org
Convert the input and output data pointers for cros_ec_command() to
void pointers so that the callers don't have to cast their custom
structs to uint8_t *.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-4-pmalani@chromium.org
cros_ec_command() can be used by other modules too. So, move it to a
common location and export it.
This patch does not introduce any functional changes.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-3-pmalani@chromium.org
Rename cros_ec_pd_command()_to cros_ec_command() since it can be used
for sending any host command, and not just PD related ones.
This patch does not introduce any functional changes.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-2-pmalani@chromium.org
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210920090522.23784-9-wsa+renesas@sang-engineering.com
cros_ec_check_features() now returns a boolean. Remove the double NOT
operator since it's not required anymore.
No functional changes are expected with this patch.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210923200321.3623222-1-pmalani@chromium.org
The kerneldoc for cros_ec_check_features() states that it returns 1 or 0
depedending on whether a feature is supported or not, but it instead
returns a negative error number in one case, and a non-1 bitmask in
other cases.
Since all call-sites only check for a 1 or 0 return value, update
the function to return boolean values.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210916014632.2662612-1-pmalani@chromium.org
Replace the cros_typec_feature_supported() function with the
pre-existing cros_ec_check_features() function which does the same
thing.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210803173619.91539-2-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Add trace event to report samples and their timestamp coming from the
EC. It allows to check if the timestamps are correct and the filter is
working correctly without introducing too much latency.
To enable these events:
cd /sys/kernel/debug/tracing/
echo 1 > events/cros_ec/enable
echo 0 > events/cros_ec/cros_ec_request_start/enable
echo 0 > events/cros_ec/cros_ec_request_done/enable
echo 1 > tracing_on
cat trace_pipe
Observe event flowing:
irq/105-chromeo-95 [000] .... 613.659758: cros_ec_sensorhub_timestamp: ...
irq/105-chromeo-95 [000] .... 613.665219: cros_ec_sensorhub_filter: dx: ...
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
cros_ec_typec:
* Changes around DP mode check, hard reset, tracking port change.
cros_ec misc:
* wilco_ec: Convert stream-like files from nonseekable to stream open
* cros_usbpd_notify: Listen to EC_HSOT_EVENT_USB_MUX host event
* fix format warning in cros_ec_typec
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYJWylAAKCRBzbaomhzOw
ws4SAQD9Alp6FpY6ne62JRHCyQBdEHwDWGQGBvE8NRkHSRcSWAD8C5vgBLGX7Zx8
wLfzrZ6x3BKGkOJuuk3+zhVu8He7WQQ=
=caTR
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Changes around DP mode check, hard reset, tracking port change.
cros_ec misc:
- wilco_ec: Convert stream-like files from nonseekable to stream open
- cros_usbpd_notify: Listen to EC_HSOT_EVENT_USB_MUX host event
- fix format warning in cros_ec_typec"
* tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: Use DEFINE_MUTEX() for mutex lock
platform/chrome: cros_usbpd_notify: Listen to EC_HOST_EVENT_USB_MUX host event
platform/chrome: cros_ec_typec: Add DP mode check
platform/chrome: cros_ec_typec: Handle hard reset
platform/chrome: cros_ec: Add Type C hard reset
platform/chrome: cros_ec_typec: Track port role
platform/chrome: cros_ec_typec: fix clang -Wformat warning
platform/chrome: cros_ec_typec: Check for device within remove function
platform/chrome: wilco_ec: convert stream-like files from nonseekable_open -> stream_open
mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210409095138.2293869-1-yebin10@huawei.com
There are certain transitional situations where the dp_mode field in the
PD_CONTROL response might not be populated with the right DP pin
assignment value yet. Add a check for that to avoid sending an invalid
value to the Type C mode switch.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210421042108.2002-1-pmalani@chromium.org
The Chrome Embedded Controller (EC) generates a hard reset type C event
when a USB Power Delivery (PD) hard reset is encountered. Handle this
event by unregistering the partner and cable on the associated port and
clearing the event flag.
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210420171617.3830902-2-pmalani@chromium.org
Stash the currently reported port role in the port struct and add a
check for that too while determining whether to re-configure on-board
Type C switches (this deals with cases like role swaps where the mux
flags don't change, but the port role does).
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Suggested-by: Nikunj A. Dadhania <nikunj.dadhania@intel.com>
Tested-by: Deepti Deshatty <deepti.deshatty@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210420171008.3829549-1-pmalani@chromium.org
The older device property API is going to be removed soon
and that will affect also I2C subystem. Supplying complete
software nodes instead of only the properties in them for
the I2C devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Clang warns about using the %h format modifier to truncate an
integer:
drivers/platform/chrome/cros_ec_typec.c:1031:3: error: format specifies type 'unsigned char' but the argument has type 'unsigned int' [-Werror,-Wformat]
typec->pd_ctrl_ver);
^~~~~~~~~~~~~~~~~~
include/linux/dev_printk.h:131:47: note: expanded from macro 'dev_dbg'
dev_printk(KERN_DEBUG, dev, dev_fmt(fmt), ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
Use an explicit bit mask to limit the number to its lower eight bits
instead.
Fixes: ad7c0510c9 ("platform/chrome: cros_ec_typec: Update port info from EC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210322115602.4003221-1-arnd@kernel.org
In a couple of call sites, we use the same pattern of checking for a
partner or cable device before attempting to remove it. Simplify this by
moving those checks into the remove functions.
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210319015103.3751672-1-pmalani@chromium.org
Eliminate the following coccicheck warning:
./drivers/platform/chrome/wilco_ec/telemetry.c:259:1-17: WARNING:
telem_fops: .read() and .write() have stream semantic; safe to change
nonseekable_open -> stream_open.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/1612688918-63132-1-git-send-email-yang.lee@linux.alibaba.com
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct ishtp_cl_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error value is a bad idea.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Lots of changes to the cros_ec_typec driver for 5.12.
A portion of this this set of cros_ec_typec driver's changes
(up to 8553a979fc platform/chrome: cros_ec_typec: Send mux configuration acknowledgment to EC)
was merged through GregKH's USB tree in immutable branch
tag-ib-usb-typec-chrome-platform-cros-ec-typec-changes-for-5.12
in order to satisfy cros_ec_typec driver and typec connector class subsystem
dependencies of subsequent changes. Please see greg's usb-5.12-rc1.
cros_ec_typec:
* Registration of cable plug information
* Support for SOP' plug registration and altmodes
* Support for reporting number of altmodes supported by partners and plugs
* Send mux configuration ack to EC via a new host command
* Support mux control with no port partner present
* Decouple cable removal from partner removal
cros_ec misc:
* Fix some event masking in cros_ec_proto.
* Gwendal reworked cros_ec's top and bottom half for consistency in ishtp and
rpmsg
* Constify static attribute_group structs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYC3jIgAKCRBzbaomhzOw
wpNqAQCTtcpgAVit937B11VSjjJmT+Cb4evb5ny7BgFSzdCjtwD+Kg2AlJWGri5z
2AdFurQNqBu5FxlegXZbYa2tONVHqwE=
=3NuV
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"Lots of changes to the cros_ec_typec driver for 5.12.
A portion of this this set of cros_ec_typec driver's changes was
merged through GregKH's USB tree in order to satisfy cros_ec_typec
driver and typec connector class subsystem dependencies of subsequent
changes.
Summary:
cros_ec_typec:
- Registration of cable plug information
- Support for SOP' plug registration and altmodes
- Support for reporting number of altmodes supported by partners and
plugs
- Send mux configuration ack to EC via a new host command
- Support mux control with no port partner present
- Decouple cable removal from partner removal
cros_ec misc:
- Fix some event masking in cros_ec_proto.
- Gwendal reworked cros_ec's top and bottom half for consistency in
ishtp and rpmsg
- Constify static attribute_group structs"
* tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Flush pending work
platform/chrome: cros_ec_types: Support disconnect events without partners
platform/chrome: cros_ec_typec: Skip port partner check in configure_mux()
platform/chrome: cros_ec_typec: Decouple partner removal
platform/chrome: cros_ec: Call interrupt bottom half at probe time
platform/chrome: cros_ec: Call interrupt bottom half in ISH or RPMSG mode
platform/chrome: cros_ec_sysfs: Add cold-ap-off to sysfs reboot.
platform/chrome: cros_ec_commands: Add host command to keep AP off after EC reset.
platform/chrome: Constify static attribute_group structs
platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT
When a PD notifier event arrives, a new work event won't be enqueued if
the current one hasn't completed. This could lead to dropped events.
So, flush any pending work before scheduling the new instance.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210211193221.610867-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
There are certain scenarios, where a disconnect event might
occur on a Type-C port with no port partners. This is required
to enable communication to Burnside Bridge USB4 retimers.
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210205195113.20277-3-rajmohan.mani@intel.com
Signed-off-by: Benson Leung <bleung@chromium.org>
For certain needs like updating the USB4 retimer firmware when no
device are connected, the Type-C ports require mux configuration,
to be able to communicate with the retimer. So removed the above
check to allow for mux configuration of Type-C ports, to enable
retimer communication.
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210205195113.20277-2-rajmohan.mani@intel.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Clear USB Type C discovery events from the Chrome EC once they've been
successfully handled.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reported-by: Benson Leung <bleung@chromium.org>
Tested-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20210203021539.745239-2-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Currently, we return if there is no partner present when
!PD_CTRL_RESP_ENABLED_CONNECTED, without proceeding further. This ties
partner removal to cable removal, whereas the two should be independent.
Update the check to remove a partner if one was registered, but continue
after that instead of returning.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210202224001.3810274-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
When SOP Discovery is done, set the opmode to PD if status indicates
SOP is connected.
SOP connected indicates a PD contract is in place, and is a solid
indication we have transitioned to PD power negotiation, either as
source or sink.
Signed-off-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210129061406.2680146-7-bleung@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Status provides sop_revision. Process it, and set it using the new
setter in the typec class.
Signed-off-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Prashant Malani <pmalani@chomium.org>
Link: https://lore.kernel.org/r/20210129061406.2680146-6-bleung@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
cros_typec_handle_sop_prime_disc now takes the PD revision provided
by the EC_CMD_TYPEC_STATUS command response for the SOP'.
Attach the properly formatted pd_revision to the cable desc before
registering the cable.
Signed-off-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210129061406.2680146-5-bleung@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
While the AP was powered off, the EC may have send messages.
If the message is not serviced within 3s, the EC stops sending message.
Unlock the EC by purging stale messages at probe time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210122054637.1422289-3-gwendal@chromium.org
Add cold-ap-off to ChromeOS EC sysfs reboot file option, corresponds to
the EC_REBOOT_COLD_AP_OFF flag, that will reset EC and keep AP off.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201221041231.14516-2-pihsun@chromium.org
The only usage of these is to print their name in a dev_err-message, and
to pass their address to sysfs_create_group() and sysfs_remove_group(),
both which takes pointers to const. Make them const to allow the compiler
to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210109001748.58036-1-rikard.falkeborn@gmail.com
After 'platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT'
some of the flags are not quite correct.
LID_CLOSED is used to suspend the device, so it makes sense to ignore that.
BATTERY events are also frequent and causing spurious wakes on elm/hana
mt8173 devices.
Fixes: c214e564ac ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.2.I3291bf83e4884c206b097ede34780e014fa3e265@changeid
The host_event_code enum is 1-based, use EC_HOST_EVENT_MASK not BIT to
generate the intended mask. This patch changes the behaviour of the
mask, a following patch will restore the intended behaviour:
'Add LID and BATTERY to default mask'
Fixes: c214e564ac ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.1.I6133572c0ab3c6b95426f804bac2d3833e24acb1@changeid
In some corner cases downgrade of the superspeed typec device(e.g. Dell
typec Dock, apple dongle) was seen because before the SOC mux configuration
finishes, EC starts configuring the next mux state.
With this change, once the SOC mux is configured, kernel will send an
acknowledgment to EC via Host command EC_CMD_USB_PD_MUX_ACK [1].
After sending the host event EC will wait for the acknowledgment from
kernel before starting the PD negotiation for the next mux state. This
helps to have a framework to build better error handling along with the
synchronization of timing sensitive mux states.
This change also brings in corresponding EC header updates from the EC code
base [1].
[1]:
https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/master/include/ec_commands.h
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201210060903.2205-3-utkarsh.h.patel@intel.com
cros_typec_cmds_supported() is currently being used to check only one
feature flag.
Add a new feature parameter to it so that it can be used to check
multiple feature flags supported in cros_ec.
Rename cros_typec_cmds_supported() to cros_typec_feature_supported().
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201210060903.2205-2-utkarsh.h.patel@intel.com
Modify the altmode registration (and unregistration) code so that it
can be used by both partners and plugs.
Then, add code to register plug altmodes using the newly parameterized
function. Also set the number of alternate modes for the plug using the
associated Type C connector class function
typec_plug_set_num_altmodes().
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-12-pmalani@chromium.org
In order to register cable alternate modes, we need to first register a
plug object. Use the Type C connector class framework to register a SOP'
plug for this purpose.
Since a cable and plug go hand in hand, we can handle the registration
and removal together.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-11-pmalani@chromium.org
Set the number of altmodes available for a registered partner using the
Type C connector class framework routine.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-10-pmalani@chromium.org
Use the PD VDO Type C cable plug type macro to retrieve and store the
cable plug type in the cable descriptor.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-9-pmalani@chromium.org
When the Chrome Embedded Controller notifies the driver that SOP'
discovery is complete, retrieve the PD discovery data and register a
cable object with the Type C connector class framework.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-8-pmalani@chromium.org
Rename the sop_disc data struct which is used to store PD discovery data
to the more generic name of disc_data. It can then be re-used to store
and process cable discovery data.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-7-pmalani@chromium.org
Factor out the PD identity parsing code into a separate function. This
way it can be re-used for Cable PD identity parsing in future patches.
No functional changes are introduced by this patch.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-6-pmalani@chromium.org
Change the disc_done flag, which indicates whether PD discovery is
complete, to sop_disc_done instead, since we will process SOP and SOP'
discovery data separately.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-5-pmalani@chromium.org
cros_ec_typec:
* A series from Prashant for Type-C to implement TYPEC_STATUS, parsing USB PD
Partner ID VDOs, and registering partner altmodes.
cros_ec misc:
* Don't treat RTC events as wakeup sources in cros_ec_proto
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCX+JsPAAKCRBzbaomhzOw
woHeAQD0j6D+m38NgLKr3mwVqkSwaHW7/NNmDIdXBikrRgiw0AD/c/kMZzSzwCGV
hgSOjg3A4uPq1gyDAW+wYmjngylv3g0=
=hT9E
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- A series from Prashant for Type-C to implement TYPEC_STATUS,
parsing USB PD Partner ID VDOs, and registering partner altmodes.
cros_ec misc:
- Don't treat RTC events as wakeup sources in cros_ec_proto"
* tag 'tag-chrome-platform-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Tolerate unrecognized mux flags
platform/chrome: cros_ec_typec: Register partner altmodes
platform/chrome: cros_ec_typec: Parse partner PD ID VDOs
platform/chrome: cros_ec_typec: Introduce TYPEC_STATUS
platform/chrome: cros_ec: Import Type C host commands
platform/chrome: cros_ec_typec: Clear partner identity on device removal
platform/chrome: cros_ec_typec: Fix remove partner logic
platform/chrome: cros_ec_typec: Relocate set_port_params_v*() functions
platform/chrome: Don't treat RTC events as wakeup sources
The big change this release has been some excellent work from Lukas
Wunner which closes a bunch of holes in the cleanup paths for drivers,
mainly introduced as a result of devm conversions causing bad
interactions with the support SPI has for allocating the bus and driver
data together. Together with some of the other work done it feels like
we've turned the corner on several long standing pain points with the
API.
- Many cleanups around probe/remove and error handling from Lukas
Wunner and Uwe Kleine-König, and further fixes around PM from Zhang
Qilong.
- Provide a mask for which bits of the mode can safely be configured by
drivers and use that to fix an issue with the ADS7846 driver.
- Documentation of the expected interactions between SPI and GPIO level
chip select polarity configuration from H. Nikolaus Schaller,
hopefully we're pretty much at the end of sorting out the
interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus
Walleij for this.
- DMA support for Allwinner sun6i controllers.
- Support for Canaan K210 Designware implementations and Intel Adler Lake.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/Xeg4ACgkQJNaLcl1U
h9BbXQf8DwmtP/biVsB0yxag11Ac9xxDL2OdMXia/DBQZsVSxqGld4l7Bwl8CMVi
TISCmzO1f53l3KZK5wu1C5mV8tXgCu4zrsPErEsrK2V2+s+4lWy10MOfAHqq/lBR
L2kifZ/uoeMBaPvJqpRimM8tv2uPXPHOKsdy2G82LzMdk0OhE5p9IkL5Nc5JbKOl
X1iWTAxtUsDb8+B57AwHSMnL4R3pb/01N0PguJJ8DGol7Oj6VcDf7nh/tqvVkEot
Ku731oCBQwBhkZKOqd7mvQAjPyoJiFPI8nofC4Bj+a1BDlr+pRcILQ4469zaIAWT
nPV6BoHTu/tVV63j8YhuamjWYAsS0g==
=ezV7
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The big change this release has been some excellent work from Lukas
Wunner which closes a bunch of holes in the cleanup paths for drivers,
mainly introduced as a result of devm conversions causing bad
interactions with the support SPI has for allocating the bus and
driver data together.
Together with some of the other work done it feels like we've turned
the corner on several long standing pain points with the API.
Summary:
- Many cleanups around probe/remove and error handling from Lukas
Wunner and Uwe Kleine-König, and further fixes around PM from Zhang
Qilong.
- Provide a mask for which bits of the mode can safely be configured
by drivers and use that to fix an issue with the ADS7846 driver.
- Documentation of the expected interactions between SPI and GPIO
level chip select polarity configuration from H. Nikolaus Schaller,
hopefully we're pretty much at the end of sorting out the
interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus
Walleij for this.
- DMA support for Allwinner sun6i controllers.
- Support for Canaan K210 Designware implementations and Intel Adler
Lake"
* tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
spi: Limit the spi device max speed to controller's max speed
spi: spi-geni-qcom: Use the new method of gpio CS control
platform/chrome: cros_ec_spi: Drop bits_per_word assignment
platform/chrome: cros_ec_spi: Don't overwrite spi::mode
spi: dw: Add support for the Canaan K210 SoC SPI
spi: dw: Add support for 32-bits max xfer size
dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller
spi: Update DT binding docs to support SiFive FU740 SoC
spi: atmel-quadspi: Fix use-after-free on unbind
spi: npcm-fiu: Disable clock in probe error path
spi: ar934x: Don't leak SPI master in probe error path
spi: mt7621: Don't leak SPI master in probe error path
spi: mt7621: Disable clock in probe error path
media: netup_unidvb: Don't leak SPI master in probe error path
spi: sc18is602: Don't leak SPI master in probe error path
spi: rb4xx: Don't leak SPI master in probe error path
spi: gpio: Don't leak SPI master in probe error path
spi: spi-mtk-nor: Don't leak SPI master in probe error path
spi: mxic: Don't leak SPI master in probe error path
...
On occasion, the Chrome Embedded Controller (EC) can send a mux
configuration which doesn't map to a particular data mode. For instance,
dedicated Type C chargers, when connected, may cause only
USB_PD_MUX_POLARITY_INVERTED to be set. This is a valid flag combination
and should not lead to a driver abort.
Modify the mux configuration handling to not return an error when an
unrecognized mux flag combination is encountered. Concordantly, make the
ensuing print a debug level print so as to not pollute the kernel logs.
Cc: Keith Short <keithshort@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201106020305.767202-1-pmalani@chromium.org
This is already handed by default in spi_setup() if the bits_per_word is
0, so just drop it to shave off a line.
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-3-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There isn't any need to overwrite the mode here in the driver with what
has been detected by the firmware, such as DT or ACPI. In fact, if we
use the SPI CS gpio descriptor feature we will overwrite the mode with
SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly
SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle
when the device is probed when it shouldn't change, confusing the driver
and making it fail to probe. Drop the assignment and let the spi core
take care of it.
Fixes: a17d94f0b6 ("mfd: Add ChromeOS EC SPI driver")
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Thunderbolt rounded/non-rounded cable support is two bits value. Correcting
it as per the Thunderbolt 3 cable discover mode VDO changes done in the
Thunderbolt 3 alternate mode header.
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
--
Changes in v2:
- Removed the fixes tag as there is no functional implication.
--
Link: https://lore.kernel.org/r/20201113202503.6559-3-utkarsh.h.patel@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the discovery data from the Chrome EC to register parter altmodes
with the Type C Connector Class framework. Also introduce a node
struct to keep track of the list of registered alt modes.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201029222738.482366-8-pmalani@chromium.org
Use EC_CMD_TYPE_DISCOVERY to retrieve and store the discovery data for
the port partner. With that data, update the PD Identity VDO values for
the partner, which were earlier not initialized.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201029222738.482366-7-pmalani@chromium.org
Make a call to the newly introduced EC_CMD_TYPEC_STATUS command.
Currently we just check to see if the SOP (port-partner) discovery was
done and emit a debug level print for it.
Subsequent patches will retrieve and parse the discovery data and fill
out the Type C connector class data structures.
Also check the EC_FEATURE_TYPEC_CMD feature flag at probe, and only call
the new TYPEC_STATUS command if the feature flag is supported.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-6-pmalani@chromium.org
The partner identity struct isn't reset when a partner is removed,
meaning a subsequent partner can inherit an old partner's identity VDOs
before discovery is complete. So, clear that struct when a partner
removal is detected.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-4-pmalani@chromium.org
The cros_unregister_ports() function can be called in situations where
the partner has not been registered yet, and so its related data
structures would not have been initialized. Calling
cros_typec_remove_partner() in such a situation can lead to null pointer
dereferences. So, only call cros_typec_remove_partner() if there is a
valid registered partner pointer.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-3-pmalani@chromium.org
Move the cros_typec_set_port_params_v0/v1() functions closer to the
place where they are called, cros_typec_port_update().
While we are performing the relocation, also move cros_typec_get_mux_info()
closer to its call-site.
No functional changes are introduced by this commit.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-2-pmalani@chromium.org
The EC sends an RTC host event when the RTC fires, but we don't need to
treat that as a wakeup event here. The RTC class already properly
handles activating and deactivating a wakeup source in rtc_update_irq()
by calling pm_stay_awake() at the start of processing and pm_relax()
once all expired RTC timers have been processed. This reduces one wakeup
increment but not much else. I noticed this while debugging RTC wakeups
and how they always incremented the wakeup count by two instead of one
because this is duplicated.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: <linux-rtc@vger.kernel.org>
Link: https://lore.kernel.org/r/20201030232523.2654478-1-swboyd@chromium.org
Use kobj_to_dev() instead of container_of().
Signed-off-by: Wang Qing <wangqing@vivo.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Since cros_ec_cmd_xfer_status() now returns Linux error codes and all
other files use that command, remove the now-unused function
cros_ec_cmd_xfer().
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Since all the other call-sites of cros_ec_cmd_xfer() have been converted
to use cros_ec_cmd_xfer_status() instead, update the remaining
call-sites to prepare for the merge of cros_ec_cmd_xfer() into
cros_ec_cmd_xfer_status().
As part of this update, change the error handling inside
cros_ec_get_sensor_count() such that the legacy LPC interface is tried
on all error values, not just when msg->result != EC_RESULT_SUCCESS.
Note that there is a slight change in API in cros_ec_get_sensor_count():
it will return a negative number of sensors when there are no sensors
on arm platform when MOTIONSENSE_CMD_DUMP is not supported (typical for
sensorless chromebook) instead of 0. However, this is not a problem when
probing the EC as we ignore errors only looking for cros_ec_get_sensor_count()
returning a positive number of sensors.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The MFD_CROS_EC config was a transitional Kconfig option to not break
current defconfigs in the kernel. Now, this is not required anymore
because all the defconfigs have been removed this option and migrated to
enable the CrOS EC parts individually.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
By default, the lightbar commands are set to the biggest lightbar command
and response. That length is greater than 128 bytes and may not work on
all machines. But all EC are probed for lightbar by sending a get version
request. Set that request size precisely.
Before the command would be:
cros_ec_cmd: version: 0, command: EC_CMD_LIGHTBAR_CMD, outsize: 194, insize: 128, result: 0
Afer:
cros_ec_cmd: version: 0, command: EC_CMD_LIGHTBAR_CMD, outsize: 1, insize: 8, result: 0
Fixes: a841178445 ("mfd: cros_ec: Use a zero-length array for command data")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
In ftrace, add more fields to the cros_ec command event:
- Add size of commands to check if they are properly set.
- Add offset (in case an EC is cascaded being another EC),
to allow proper command output
With:
echo 1 > events/cros_ec/cros_ec_cmd/enable
We now have (on samus)
Invalid command for the sensor stack:
ectool-6942 [002] .... 3082.783116: cros_ec_request_done: version: 3,
offset: 0, command: EC_CMD_MOTION_SENSE_CMD, outsize: 2, insize: 19,
ec result: EC_RES_INVALID_PARAM, retval: 0
Powerd accessing PD EC being the main EC:
powerd-1272 [002] .... 40.644026: cros_ec_request_done: version: 0,
offset: 1, command: EC_CMD_USB_PD_POWER_INFO, outsize: 1, insize: 16,
ec result: EC_RES_SUCCESS, retval: 16
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
As per USB Type-C Spec R2.0 section 4.5.1.2 (Connecting Sources and Sinks)
and section 4.5.2.2 (Connection State Machine Requirements), the typical
flow for configuring a device connected to a typeC port is as below:
1. Source/sink detection
2. Orientation
3. Data role
4. VCONN
5. VBUS (USB Type-C currents)
6. The connector is now configured. We can start the PD communication
that should lead into configuration of the mux if we enter a mode.
But in existing code data role was set after the connector and mux are
already configured. So fix this by following the spec to set the data
role before the connector and mux are configured.
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
On disconnect port partner is removed and usb role is set to NONE.
But then in cros_typec_port_update() the role is set again.
Avoid this by moving usb_role_switch_set_role() to
cros_typec_configure_mux().
Suggested-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
usb_role_switch_set_role() has the second argument as enum for usb_role.
Currently depending upon the data role i.e. UFP(0) or DFP(1) is sent.
This eventually translates to USB_ROLE_NONE in case of UFP and
USB_ROLE_DEVICE in case of DFP. Correct this by sending correct enum
values as USB_ROLE_DEVICE in case of UFP and USB_ROLE_HOST in case of
DFP.
Fixes: 7e7def15fa ("platform/chrome: cros_ec_typec: Add USB mux control")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
With USB4 mode the mux driver needs the Enter_USB Data
Object (EUDO) that was used when the USB mode was entered.
Though the object is not available in the driver, it is
possible to construct it from the information we have.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The EC reports a variety of error codes. Most of those, with the exception
of EC_RES_INVALID_VERSION, are converted to -EPROTO. As result, the actual
EC error code gets lost. Introduce cros_ec_map_error() to map EC error
codes to Linux error codes, and use it in cros_ec_cmd_xfer_status() to
report more meaningful errors to the caller. With this change, callers of
cros_ec_cmd_xfer_status() can implement a more distinguished action without
having to rely on the EC error code. At the same time, debugging is improved
in situations where the Linux error code is reported to userspace and/or in
the kernel log.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
-ENOTSUPP is not a SUSV4 error code and should not be used. Use
-ENOPROTOOPT instead to report EC_RES_INVALID_VERSION responses
from the EC. This matches match the NFS response for unsupported
protocol versions.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Since commit c5cd2b47b2 ("platform/chrome: cros_ec_proto: Report command
not supported") we can no longer assume that cros_ec_cmd_xfer_status()
reports -EPROTO for all errors returned by the EC itself. A follow-up
patch will change cros_ec_cmd_xfer_status() to report additional errors
reported by the EC as distinguished Linux error codes.
Prepare for this change by always reporting both the Linux error code
and the EC error code in sysfs attributes.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Since commit c5cd2b47b2 ("platform/chrome: cros_ec_proto: Report command
not supported") we can no longer assume that cros_ec_cmd_xfer_status()
reports -EPROTO for all errors returned by the EC itself. A follow-up
patch will change cros_ec_cmd_xfer_status() to report additional errors
reported by the EC as distinguished Linux error codes.
Handle this change by no longer assuming that -EPROTO is used to report
all errors returned by the EC itself. Since errors reported by the EC are
already reported in text form through sysfs attributes, extend this form
of error reporting to all errors reported by cros_ec_cmd_xfer_status().
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* cros_ec_typec
- Add support for switch control and alternate modes to the Chrome EC Type C
port driver
- Add basic suspend/resume support
* sensorhub:
- Fix timestamp overflow issue
- Fix legacy timestamp spreading on Nami systems
* cros_ec_proto:
- After removing all users of, stop exporting cros_ec_cmd_xfer
- Check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK and ignore wakeups on old
ECs
* misc:
- Documentation warning cleanup.
- Fix double unlock issue in ishtp
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXzG3VwAKCRBzbaomhzOw
wkRMAQCjvqZwbMJ+jNXsgqb5+78WN6i4PC5e7lzjPofHEdE6sAEAm4FiTpcEc/Kk
qnti54fb3O15I/x8sXWceznXbdFAigw=
=zFfw
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Add support for switch control and alternate modes to the Chrome EC
Type C port driver
- Add basic suspend/resume support
sensorhub:
- Fix timestamp overflow issue
- Fix legacy timestamp spreading on Nami systems
cros_ec_proto:
- After removing all users of, stop exporting cros_ec_cmd_xfer
- Check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK and ignore
wakeups on old ECs
misc:
- Documentation warning cleanup
- Fix double unlock issue in ishtp"
* tag 'tag-chrome-platform-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (21 commits)
platform/chrome: cros_ec_proto: check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK
platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs
platform/chrome: cros_ec_sensorhub: Simplify legacy timestamp spreading
platform/chrome: cros_ec_proto: Do not export cros_ec_cmd_xfer()
platform/chrome: cros_ec_typec: Unregister partner on error
platform/chrome: cros_ec_sensorhub: Fix EC timestamp overflow
platform/chrome: cros_ec_typec: Add PM support
platform/chrome: cros_ec_typec: Use workqueue for port update
platform/chrome: cros_ec_typec: Add a dependency on USB_ROLE_SWITCH
platform/chrome: cros_ec_ishtp: Fix a double-unlock issue
platform/chrome: cros_ec_rpmsg: Document missing struct parameters
platform/chrome: cros_ec_spi: Document missing function parameters
platform/chrome: cros_ec_typec: Add TBT compat support
platform/chrome: cros_ec: Add TBT pd_ctrl fields
platform/chrome: cros_ec_typec: Make configure_mux static
platform/chrome: cros_ec_typec: Support DP alt mode
platform/chrome: cros_ec_typec: Add USB mux control
platform/chrome: cros_ec_typec: Register PD CTRL cmd v2
platform/chrome: cros_ec: Update mux state bits
platform/chrome: cros_ec_typec: Register Type C switches
...
static priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low' priority level,
plus sched_set_normal() to set the policy back to non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in a separate
tree.
When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c,
which can be resolved via:
sched_set_fifo(ctlr->kworker_task);
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/7JH
-----END PGP SIGNATURE-----
Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched/fifo updates from Ingo Molnar:
"This adds the sched_set_fifo*() encapsulation APIs to remove static
priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low'
priority level, plus sched_set_normal() to set the policy back to
non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in
a separate tree"
* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched,tracing: Convert to sched_set_fifo()
sched: Remove sched_set_*() return value
sched: Remove sched_setscheduler*() EXPORTs
sched,psi: Convert to sched_set_fifo_low()
sched,rcutorture: Convert to sched_set_fifo_low()
sched,rcuperf: Convert to sched_set_fifo_low()
sched,locktorture: Convert to sched_set_fifo()
sched,irq: Convert to sched_set_fifo()
sched,watchdog: Convert to sched_set_fifo()
sched,serial: Convert to sched_set_fifo()
sched,powerclamp: Convert to sched_set_fifo()
sched,ion: Convert to sched_set_normal()
sched,powercap: Convert to sched_set_fifo*()
sched,spi: Convert to sched_set_fifo*()
sched,mmc: Convert to sched_set_fifo*()
sched,ivtv: Convert to sched_set_fifo*()
sched,drm/scheduler: Convert to sched_set_fifo*()
sched,msm: Convert to sched_set_fifo*()
sched,psci: Convert to sched_set_fifo*()
sched,drbd: Convert to sched_set_fifo*()
...
As with cros_ec_cmd_xfer_status(), etc., it's not enough to simply check
for the return status of send_command() -- that only covers transport or
other similarly-fatal errors. One must also check the ->result field, to
see whether the command really succeeded. If not, we can't use the data
it returns.
The caller of cros_ec_get_host_event_wake_mask() ignores this, and so
for example, on EC's where the command is not implemented, we're using
junk (or in practice, all zeros) for our wake-mask. We should be using a
non-zero default (currently, it's supposed to be all-1's).
Fix this by checking the ->result field and returning -EPROTO for
errors.
I might label this as fixing commit 29d99b966d ("cros_ec: Don't signal
wake event for non-wake host events"), except that this fix alone
actually may make things worse, as it now allows for a lot more spurious
wakeups. The patch "platform/chrome: cros_ec_proto: ignore battery/AC
wakeups on old ECs" helps to mitigate this.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
