The key_to_protkey handler function in module pkey_pckmo should return
with success on all known protected key types, including the new types
introduced by fd197556ee ("s390/pkey: Add AES xts and HMAC clear key
token support").
Fixes: fd197556ee ("s390/pkey: Add AES xts and HMAC clear key token support")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A crypto card comes in 3 flavors: accelerator, CCA co-processor or
EP11 co-processor. Within a protected execution environment only the
accelerator and EP11 co-processor is supported. However, it is
possible to set up a KVM guest with a CCA card and run it as a
protected execution guest. There is nothing at the host side which
prevents this. Within such a guest, a CCA card is shown as "illicit"
and you can't do anything with such a crypto card.
Regardless of the unsupported CCA card within a protected execution
guest there are a couple of user space applications which
unconditional try to run crypto requests to the zcrypt device
driver. There was a bug within the AP bus code which allowed such a
request to be forwarded to a CCA card where it is finally
rejected and the driver reacts with -ENODEV but also triggers an AP
bus scan. Together with a retry loop this caused some kind of "hang"
of the KVM guest. On startup it caused timeouts and finally led the
KVM guest startup fail. Fix that by closing the gap and make sure a
CCA card is not usable within a protected execution environment.
Another behavior within an protected execution environment with CCA
cards was that the se_bind and se_associate AP queue sysfs attributes
where shown. The implementation unconditional always added these
attributes. Fix that by checking if the card mode is supported within
a protected execution environment and only if valid, add the attribute
group.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and mdevctl
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmb39nkACgkQjYWKoQLX
FBiacggAlHrwDYIZdr7bd+0bJa8Wq5STrdo1XiohQhCrRg+4rXRaquEQszWVheRk
qi/9u+MKJFtbd4VMbf+WqEi2P4Pnn5cByv+As3B4RMR0Tp3uQK5TlDbh7wbJ+pIG
AQQoL5D2z05rvbYgc1Wvt/3lgrfs2EzUY3cAyIMmFwSp0On+psDuwuFVtWzH0jCr
fxCwX7mrF6OoBMR0QSUxAvoOujUhd4CANk3n6rNxJfi2AC/gX/ZkFUrV5a3FvJ2Z
X7fQgDc3rivsm5wFuoBvlrH5J1jhmWtsg8Tiygos7BBehpQ5NUsJMDGS8kR+avbF
iYKg1oMy5/ZXekBjqkEMO6Vp3nCrdg==
=Idf7
-----END PGP SIGNATURE-----
Merge tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and
mdevctl
* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Driver feature advertisement
s390/vdso: Use one large alternative instead of an alternative branch
s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
tools: Add additional SYM_*() stubs to linkage.h
s390/vdso: Use macros for annotation of asm functions
s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
s390/vdso: Get rid of permutation constants
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Advertise features of the driver for the benefit of automated tooling
like Libvirt and mdevctl.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Link: https://lore.kernel.org/r/20240916120123.11484-1-jjherne@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Optimize ftrace and kprobes code patching and avoid stop machine for
kprobes if sequential instruction fetching facility is available
- Add hiperdispatch feature to dynamically adjust CPU capacity in
vertical polarization to improve scheduling efficiency and overall
performance. Also add infrastructure for handling warning track
interrupts (WTI), allowing for graceful CPU preemption
- Rework crypto code pkey module and split it into separate, independent
modules for sysfs, PCKMO, CCA, and EP11, allowing modules to load only
when the relevant hardware is available
- Add hardware acceleration for HMAC modes and the full AES-XTS cipher,
utilizing message-security assist extensions (MSA) 10 and 11. It
introduces new shash implementations for HMAC-SHA224/256/384/512 and
registers the hardware-accelerated AES-XTS cipher as the preferred
option. Also add clear key token support
- Add MSA 10 and 11 processor activity instrumentation counters to perf
and update PAI Extension 1 NNPA counters
- Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE
statements
- Add support for SHA3 performance enhancements introduced with MSA 12
- Add support for the query authentication information feature of
MSA 13 and introduce the KDSA CPACF instruction. Provide query and query
authentication information in sysfs, enabling tools like cpacfinfo to
present this data in a human-readable form
- Update kernel disassembler instructions
- Always enable EXPOLINE_EXTERN if supported by the compiler to ensure
kpatch compatibility
- Add missing warning handling and relocated lowcore support to the
early program check handler
- Optimize ftrace_return_address() and avoid calling unwinder
- Make modules use kernel ftrace trampolines
- Strip relocs from the final vmlinux ELF file to make it roughly 2
times smaller
- Dump register contents and call trace for early crashes to the console
- Generate ptdump address marker array dynamically
- Fix rcu_sched stalls that might occur when adding or removing large
amounts of pages at once to or from the CMM balloon
- Fix deadlock caused by recursive lock of the AP bus scan mutex
- Unify sync and async register save areas in entry code
- Cleanup debug prints in crypto code
- Various cleanup and sanitizing patches for the decompressor
- Various small ftrace cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmbsZawACgkQjYWKoQLX
FBg+Ogf+NiKPfvI14NcTwnOHB6qz8ApPdGfN9bNVtQxtK3epeAvtj0cMonAuKpRg
xckTRRd8y0guhCT7Q2+WitSgA5eYDn+u9/Ux5YuKUdUdXolQ0D64BJNtVeEFkmJj
s+Lesb8cVI9T2VBZOpuF9lJigfsDALBkFroqN4MDudDeahS+qy33bAc0OoqYNXHo
S6OwPK1/tEG9O/oTN2V4mN+aP0B3/dl7Msezb0gfAXQJA+WUAyMNK0RHvoG9uzaa
BWAyWWYABj6woGZEAQAzXcbzkQiRPixTqZVe6e4YndXhIlEnB/Z2AQFdTpT9V7En
eOmmve3QuJa0hkF9q4H/anvOMPntTg==
=Xagq
-----END PGP SIGNATURE-----
Merge tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Optimize ftrace and kprobes code patching and avoid stop machine for
kprobes if sequential instruction fetching facility is available
- Add hiperdispatch feature to dynamically adjust CPU capacity in
vertical polarization to improve scheduling efficiency and overall
performance. Also add infrastructure for handling warning track
interrupts (WTI), allowing for graceful CPU preemption
- Rework crypto code pkey module and split it into separate,
independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules
to load only when the relevant hardware is available
- Add hardware acceleration for HMAC modes and the full AES-XTS cipher,
utilizing message-security assist extensions (MSA) 10 and 11. It
introduces new shash implementations for HMAC-SHA224/256/384/512 and
registers the hardware-accelerated AES-XTS cipher as the preferred
option. Also add clear key token support
- Add MSA 10 and 11 processor activity instrumentation counters to perf
and update PAI Extension 1 NNPA counters
- Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE
statements
- Add support for SHA3 performance enhancements introduced with MSA 12
- Add support for the query authentication information feature of MSA
13 and introduce the KDSA CPACF instruction. Provide query and query
authentication information in sysfs, enabling tools like cpacfinfo to
present this data in a human-readable form
- Update kernel disassembler instructions
- Always enable EXPOLINE_EXTERN if supported by the compiler to ensure
kpatch compatibility
- Add missing warning handling and relocated lowcore support to the
early program check handler
- Optimize ftrace_return_address() and avoid calling unwinder
- Make modules use kernel ftrace trampolines
- Strip relocs from the final vmlinux ELF file to make it roughly 2
times smaller
- Dump register contents and call trace for early crashes to the
console
- Generate ptdump address marker array dynamically
- Fix rcu_sched stalls that might occur when adding or removing large
amounts of pages at once to or from the CMM balloon
- Fix deadlock caused by recursive lock of the AP bus scan mutex
- Unify sync and async register save areas in entry code
- Cleanup debug prints in crypto code
- Various cleanup and sanitizing patches for the decompressor
- Various small ftrace cleanups
* tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits)
s390/crypto: Display Query and Query Authentication Information in sysfs
s390/crypto: Add Support for Query Authentication Information
s390/crypto: Rework RRE and RRF CPACF inline functions
s390/crypto: Add KDSA CPACF Instruction
s390/disassembler: Remove duplicate instruction format RSY_RDRU
s390/boot: Move boot_printk() code to own file
s390/boot: Use boot_printk() instead of sclp_early_printk()
s390/boot: Rename decompressor_printk() to boot_printk()
s390/boot: Compile all files with the same march flag
s390: Use MARCH_HAS_*_FEATURES defines
s390: Provide MARCH_HAS_*_FEATURES defines
s390/facility: Disable compile time optimization for decompressor code
s390/boot: Increase minimum architecture to z10
s390/als: Remove obsolete comment
s390/sha3: Fix SHA3 selftests failures
s390/pkey: Add AES xts and HMAC clear key token support
s390/cpacf: Add MSA 10 and 11 new PCKMO functions
s390/mm: Add cond_resched() to cmm_alloc/free_pages()
s390/pai_ext: Update PAI extension 1 counters
s390/pai_crypto: Add support for MSA 10 and 11 pai counters
...
Add support for deriving protected keys from clear key token for
AES xts and HMAC keys via PCKMO instruction. Add support for
protected key generation and unwrap of protected key tokens for
these key types. Furthermore 4 new sysfs attributes are introduced:
- /sys/devices/virtual/misc/pkey/protkey/protkey_aes_xts_128
- /sys/devices/virtual/misc/pkey/protkey/protkey_aes_xts_256
- /sys/devices/virtual/misc/pkey/protkey/protkey_hmac_512
- /sys/devices/virtual/misc/pkey/protkey/protkey_hmac_1024
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is a possibility to deadlock with an recursive
lock of the AP bus scan mutex ap_scan_bus_mutex:
... kernel: ============================================
... kernel: WARNING: possible recursive locking detected
... kernel: 5.14.0-496.el9.s390x #3 Not tainted
... kernel: --------------------------------------------
... kernel: kworker/12:1/130 is trying to acquire lock:
... kernel: 0000000358bc1510 (ap_scan_bus_mutex){+.+.}-{3:3}, at: ap_bus_force_rescan+0x92/0x108
... kernel:
but task is already holding lock:
... kernel: 0000000358bc1510 (ap_scan_bus_mutex){+.+.}-{3:3}, at: ap_scan_bus_wq_callback+0x28/0x60
... kernel:
other info that might help us debug this:
... kernel: Possible unsafe locking scenario:
... kernel: CPU0
... kernel: ----
... kernel: lock(ap_scan_bus_mutex);
... kernel: lock(ap_scan_bus_mutex);
... kernel:
*** DEADLOCK ***
Here is how the callstack looks like:
... [<00000003576fe9ce>] process_one_work+0x2a6/0x748
... [<0000000358150c00>] ap_scan_bus_wq_callback+0x40/0x60 <- mutex locked
... [<00000003581506e2>] ap_scan_bus+0x5a/0x3b0
... [<000000035815037c>] ap_scan_adapter+0x5b4/0x8c0
... [<000000035814fa34>] ap_scan_domains+0x2d4/0x668
... [<0000000357d989b4>] device_add+0x4a4/0x6b8
... [<0000000357d9bb54>] bus_probe_device+0xb4/0xc8
... [<0000000357d9daa8>] __device_attach+0x120/0x1b0
... [<0000000357d9a632>] bus_for_each_drv+0x8a/0xd0
... [<0000000357d9d548>] __device_attach_driver+0xc0/0x140
... [<0000000357d9d3d8>] driver_probe_device+0x40/0xf0
... [<0000000357d9cec2>] really_probe+0xd2/0x460
... [<000000035814d7b0>] ap_device_probe+0x150/0x208
... [<000003ff802a5c46>] zcrypt_cex4_queue_probe+0xb6/0x1c0 [zcrypt_cex4]
... [<000003ff7fb2d36e>] zcrypt_queue_register+0xe6/0x1b0 [zcrypt]
... [<000003ff7fb2c8ac>] zcrypt_rng_device_add+0x94/0xd8 [zcrypt]
... [<0000000357d7bc52>] hwrng_register+0x212/0x228
... [<0000000357d7b8c2>] add_early_randomness+0x102/0x110
... [<000003ff7fb29c94>] zcrypt_rng_data_read+0x94/0xb8 [zcrypt]
... [<0000000358150aca>] ap_bus_force_rescan+0x92/0x108
... [<0000000358177572>] mutex_lock_interruptible_nested+0x32/0x40 <- lock again
Note this only happens when the very first random data providing
crypto card appears via hot plug in the system AND is in disabled
state ("deconfig"). Then the initial pull of random data fails and
a re-scan of the AP bus is triggered while already in the middle
of an AP bus scan caused by the appearing new hardware.
The fix is relatively simple once the scenario us understood:
The AP bus force rescan function will immediately return if there
is currently an AP bus scan running with the very same thread id.
Fixes: eacf5b3651 ("s390/ap: introduce mutex to lock the AP bus scan")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a use case during early boot with an secure key encrypted
root file system where the paes cipher may try to derive a protected
key from secure key while the AP bus is still in the process of
scanning the bus and building up the zcrypt device drivers. As the
detection of CEX cards also triggers the modprobe of the pkey handler
modules, these modules may come into existence too late.
Yet another use case happening during early boot is for use of an
protected key encrypted swap file(system). There is an ephemeral
protected key read via sysfs to set up the swap file. But this only
works when the pkey_pckmo module is already in - which may happen at a
later time as the load is triggered via CPU feature.
This patch introduces a new function pkey_handler_request_modules()
and invokes it which unconditional tries to load in the pkey handler
modules. This function is called for the in-kernel API to derive a
protected key from whatever and in the sysfs API when the first
attempt to simple invoke the handler function failed.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For some keys there exists an alternative but usually slower
path to convert the key material into a protected key.
This patch introduces a new handler function
slowpath_key_to_protkey()
which provides this alternate path for the CCA and EP11
handler code. With that even the knowledge about how
and when this can be used within the pkey API code can
be removed. So now the pkey API just tries the primary
way and if that fails simple tries the alternative way.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Introduce pkey base kernel code with a simple pkey handler registry.
Regroup the pkey code into these kernel modules:
- pkey is the pkey api supporting the ioctls, sysfs and in-kernel api.
Also the pkey base code which offers the handler registry and
handler wrapping invocation functions is integrated there. This
module is automatically loaded in via CPU feature if the MSA feature
is available.
- pkey-cca is the CCA related handler code kernel module a offering
CCA specific implementation for pkey. This module is loaded in
via MODULE_DEVICE_TABLE when a CEX[4-8] card becomes available.
- pkey-ep11 is the EP11 related handler code kernel module offering an
EP11 specific implementation for pkey. This module is loaded in via
MODULE_DEVICE_TABLE when a CEX[4-8] card becomes available.
- pkey-pckmo is the PCKMO related handler code kernel module. This
module is loaded in via CPU feature if the MSA feature is available,
but on init a check for availability of the pckmo instruction is
performed.
The handler modules register via a pkey_handler struct at the pkey
base code and the pkey customer (that is currently the pkey api code
fetches a handler via pkey handler registry functions and calls the
unified handler functions via the pkey base handler functions.
As a result the pkey-cca, pkey-ep11 and pkey-pckmo modules get
independent from each other and it becomes possible to write new
handlers which offer another kind of implementation without implicit
dependencies to other handler implementations and/or kernel device
drivers.
For each of these 4 kernel modules there is an individual Kconfig
entry: CONFIG_PKEY for the base and api, CONFIG_PKEY_CCA for the PKEY
CCA support handler, CONFIG_PKEY_EP11 for the EP11 support handler and
CONFIG_PKEY_PCKMO for the pckmo support. The both CEX related handler
modules (PKEY CCA and PKEY EP11) have a dependency to the zcrypt api
of the zcrypt device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As a preparation step for introducing a common function API
between the pkey API module and the handlers (that is the
cca, ep11 and pckmo code) this patch unifies the functions
signatures exposed by the handlers and reworks all the
invocation code of these functions.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This is a huge rework of all the pkey kernel module code.
The goal is to split the code into individual parts with
a dedicated calling interface:
- move all the sysfs related code into pkey_sysfs.c
- all the CCA related code goes to pkey_cca.c
- the EP11 stuff has been moved to pkey_ep11.c
- the PCKMO related code is now in pkey_pckmo.c
The CCA, EP11 and PCKMO code may be seen as "handlers" with
a similar calling interface. The new header file pkey_base.h
declares this calling interface. The remaining code in
pkey_api.c handles the ioctl, the pkey module things and the
"handler" independent code on top of the calling interface
invoking the handlers.
This regrouping of the code will be the base for a real
pkey kernel module split into a pkey base module which acts
as a dispatcher and handler modules providing their service.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Split the very huge ioctl handling function pkey_unlocked_ioctl()
into individual functions per each IOCTL command.
There is no change in functional code coming with this patch.
The work is a simple copy-and-paste with the goal to have
the functionality absolutely untouched.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
[dengler: fix indent]
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The dynamic debugging provides function names on request. So remove
all explicit function strings.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the rework of the AP bus scan and the introduction of
a bindings complete completion also the timing until the
userspace finally receives a AP bus binding complete uevent
had increased. Unfortunately this event triggers some important
jobs for preparation of KVM guests, for example the modification
of card/queue masks to reassign AP resources to the alternate
AP queue device driver (vfio_ap) which is the precondition
for building mediated devices which may be a precondition for
starting KVM guests using AP resources.
This small fix now triggers the check for binding complete
each time an AP device driver has registered. With this patch
the bindings complete may be posted up to 30s earlier as there
is no need to wait for the next AP bus scan any more.
Fixes: 778412ab91 ("s390/ap: rearm APQNs bindings complete completion")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparse warns about a large memset() call within
zcrypt_device_status_mask_ext():
drivers/s390/crypto/zcrypt_api.c:1303:15: warning: memset with byte count of 262144
Get rid of this warning by making sure that all callers of this function
allocate memory with __GFP_ZERO, which zeroes memory already at allocation
time, which again allows to remove the memset() call.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With the mentioned commit (see the fixes tag) on every AP bus scan an
uevent "AP bus change bindings complete" is emitted. Furthermore if an AP
device switched from one driver to another, for example by manipulating the
apmask, there was never a "bindings complete" uevent generated.
The "bindings complete" event should be sent once when all AP devices have
been bound to device drivers and again if unbind/bind actions take place
and finally all AP devices are bound again. Therefore implement this.
Fixes: 778412ab91 ("s390/ap: rearm APQNs bindings complete completion")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A system crash like this
Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403
Fault in home space mode while using kernel ASCE.
AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d
Oops: 0038 ilc:3 [#1] PREEMPT SMP
Modules linked in: mlx5_ib ...
CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8
Hardware name: IBM 3931 A01 704 (LPAR)
Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3
000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0
000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff
000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8
Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a
0000014b75e7b600: 18b2 lr %r11,%r2
#0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616
>0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13)
0000014b75e7b60c: a7680001 lhi %r6,1
0000014b75e7b610: 187b lr %r7,%r11
0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654
0000014b75e7b616: 18e9 lr %r14,%r9
Call Trace:
[<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8
([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8)
[<0000014b75e7b758>] apmask_store+0x68/0x140
[<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8
[<0000014b75598524>] vfs_write+0x1b4/0x448
[<0000014b7559894c>] ksys_write+0x74/0x100
[<0000014b7618a440>] __do_syscall+0x268/0x328
[<0000014b761a3558>] system_call+0x70/0x98
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8
Kernel panic - not syncing: Fatal exception: panic_on_oops
occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value
(like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX.
The fix is simple: use unsigned long values for the internal variables. The
correct checks are already in place in the function but a simple int for
the internal variables was used with the possibility to overflow.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Although the clear-key of neither protected- nor secure-keys is
accessible, this key material should only be visible to the calling
process. So wipe all copies of protected- or secure-keys from stack,
even in case of an error.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Wipe all sensitive data from stack for all IOCTLs, which convert a
clear-key into a protected- or secure-key.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Wipe sensitive data from stack also if the copy_to_user() fails.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
- Rework the AP initialization and add missing cleanups to the error path
- Swap IRQ and AP bus/device registration to avoid race conditions
- Export prot_virt_guest symbol
- Introduce AP configuration changes notifier interface to facilitate
modularization of the AP bus
- Add CONFIG_AP kernel configuration option to allow modularization of
the AP bus
- Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description and
dependency and rename it to CONFIG_AP_DEBUG
- Convert sprintf() and snprintf() to sysfs_emit() in CIO code
- Adjust indentation of RELOCS command build step
- Make crypto performance counters upward compatible
- Convert make_page_secure() and gmap_make_secure() to use folio
- Rework channel-utilization-block (CUB) handling in preparation of
introducing additional CUBs
- Use attribute groups to simplify registration, removal and extension
of measurement-related channel-path sysfs attributes
- Add a per-channel-path binary "ext_measurement" sysfs attribute that
provides access to extended channel-path measurement data
- Export measurement data for all channel-measurement-groups (CMG), not
only for a specific ones. This enables support of new CMG data formats
in userspace without the need for kernel changes
- Add a per-channel-path sysfs attribute "speed_bps" that provides the
operating speed in bits per second or 0 if the operating speed is not
available
- The CIO tracepoint subchannel-type field "st" is incorrectly set to
the value of subchannel-enabled SCHIB "ena" field. Fix that
- Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS
- Consider the maximum physical address available to a DCSS segment
(512GB) when memory layout is set up
- Simplify the virtual memory layout setup by reducing the size of
identity mapping vs vmemmap overlap
- Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
This will allow to place the kernel image next to kernel modules
- Move everyting KASLR related from <asm/setup.h> to <asm/page.h>
- Put virtual memory layout information into a structure to improve
code generation
- Currently __kaslr_offset is the kernel offset in both physical and
virtual memory spaces. Uncouple these offsets to allow uncoupling
of the addresses spaces
- Currently the identity mapping base address is implicit and is always
set to zero. Make it explicit by putting into __identity_base persistent
boot variable and use it in proper context
- Introduce .amode31 section start and end macros AMODE31_START and
AMODE31_END
- Introduce OS_INFO entries that do not reference any data in memory,
but rather provide only values
- Store virtual memory layout in OS_INFO. It is read out by makedumpfile,
crash and other tools
- Store virtual memory layout in VMCORE_INFO. It is read out by crash and
other tools when /proc/kcore device is used
- Create additional PT_LOAD ELF program header that covers kernel image
only, so that vmcore tools could locate kernel text and data when virtual
and physical memory spaces are uncoupled
- Uncouple physical and virtual address spaces
- Map kernel at fixed location when KASLR mode is disabled. The location is
defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration value.
- Rework deployment of kernel image for both compressed and uncompressed
variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel configuration
value
- Move .vmlinux.relocs section in front of the compressed kernel.
The interim section rescue step is avoided as result
- Correct modules thunk offset calculation when branch target is more
than 2GB away
- Kernel modules contain their own set of expoline thunks. Now that the
kernel modules area is less than 4GB away from kernel expoline thunks,
make modules use kernel expolines. Also make EXPOLINE_EXTERN the default
if the compiler supports it
- userfaultfd can insert shared zeropages into processes running VMs,
but that is not allowed for s390. Fallback to allocating a fresh
zeroed anonymous folio and insert that instead
- Re-enable shared zeropages for non-PV and non-skeys KVM guests
- Rename hex2bitmap() to ap_hex2bitmap() and export it for external use
- Add ap_config sysfs attribute to provide the means for setting or
displaying adapters, domains and control domains assigned to a vfio-ap
mediated device in a single operation
- Make vfio_ap_mdev_link_queue() ignore duplicate link requests
- Add write support to ap_config sysfs attribute to allow atomic update
a vfio-ap mediated device state
- Document ap_config sysfs attribute
- Function os_info_old_init() is expected to be called only from a regular
kdump kernel. Enable it to be called from a stand-alone dump kernel
- Address gcc -Warray-bounds warning and fix array size in struct os_info
- s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks
- Use unwinder instead of __builtin_return_address() with ftrace to
prevent returning of undefined values
- Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is disabled
- Compile kernel with -fPIC and link with -no-pie to allow kpatch feature
always succeed and drop the whole CONFIG_PIE_BUILD option-enabled code
- Add missing virt_to_phys() converter for VSIE facility and crypto
control blocks
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZjkp5xccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8D99AQCEby+KHssuZe9m0NvvikWREYBC
myqob4EmdU3KdTEbNAEAt2OB7mzSQc90yjawI+Je7vwVyh3uc2Nb4Qg05yO6owI=
=eOYN
-----END PGP SIGNATURE-----
Merge tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Store AP Query Configuration Information in a static buffer
- Rework the AP initialization and add missing cleanups to the error
path
- Swap IRQ and AP bus/device registration to avoid race conditions
- Export prot_virt_guest symbol
- Introduce AP configuration changes notifier interface to facilitate
modularization of the AP bus
- Add CONFIG_AP kernel configuration option to allow modularization of
the AP bus
- Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description
and dependency and rename it to CONFIG_AP_DEBUG
- Convert sprintf() and snprintf() to sysfs_emit() in CIO code
- Adjust indentation of RELOCS command build step
- Make crypto performance counters upward compatible
- Convert make_page_secure() and gmap_make_secure() to use folio
- Rework channel-utilization-block (CUB) handling in preparation of
introducing additional CUBs
- Use attribute groups to simplify registration, removal and extension
of measurement-related channel-path sysfs attributes
- Add a per-channel-path binary "ext_measurement" sysfs attribute that
provides access to extended channel-path measurement data
- Export measurement data for all channel-measurement-groups (CMG), not
only for a specific ones. This enables support of new CMG data
formats in userspace without the need for kernel changes
- Add a per-channel-path sysfs attribute "speed_bps" that provides the
operating speed in bits per second or 0 if the operating speed is not
available
- The CIO tracepoint subchannel-type field "st" is incorrectly set to
the value of subchannel-enabled SCHIB "ena" field. Fix that
- Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS
- Consider the maximum physical address available to a DCSS segment
(512GB) when memory layout is set up
- Simplify the virtual memory layout setup by reducing the size of
identity mapping vs vmemmap overlap
- Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
This will allow to place the kernel image next to kernel modules
- Move everyting KASLR related from <asm/setup.h> to <asm/page.h>
- Put virtual memory layout information into a structure to improve
code generation
- Currently __kaslr_offset is the kernel offset in both physical and
virtual memory spaces. Uncouple these offsets to allow uncoupling of
the addresses spaces
- Currently the identity mapping base address is implicit and is always
set to zero. Make it explicit by putting into __identity_base
persistent boot variable and use it in proper context
- Introduce .amode31 section start and end macros AMODE31_START and
AMODE31_END
- Introduce OS_INFO entries that do not reference any data in memory,
but rather provide only values
- Store virtual memory layout in OS_INFO. It is read out by
makedumpfile, crash and other tools
- Store virtual memory layout in VMCORE_INFO. It is read out by crash
and other tools when /proc/kcore device is used
- Create additional PT_LOAD ELF program header that covers kernel image
only, so that vmcore tools could locate kernel text and data when
virtual and physical memory spaces are uncoupled
- Uncouple physical and virtual address spaces
- Map kernel at fixed location when KASLR mode is disabled. The
location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration
value.
- Rework deployment of kernel image for both compressed and
uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel
configuration value
- Move .vmlinux.relocs section in front of the compressed kernel. The
interim section rescue step is avoided as result
- Correct modules thunk offset calculation when branch target is more
than 2GB away
- Kernel modules contain their own set of expoline thunks. Now that the
kernel modules area is less than 4GB away from kernel expoline
thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN
the default if the compiler supports it
- userfaultfd can insert shared zeropages into processes running VMs,
but that is not allowed for s390. Fallback to allocating a fresh
zeroed anonymous folio and insert that instead
- Re-enable shared zeropages for non-PV and non-skeys KVM guests
- Rename hex2bitmap() to ap_hex2bitmap() and export it for external use
- Add ap_config sysfs attribute to provide the means for setting or
displaying adapters, domains and control domains assigned to a
vfio-ap mediated device in a single operation
- Make vfio_ap_mdev_link_queue() ignore duplicate link requests
- Add write support to ap_config sysfs attribute to allow atomic update
a vfio-ap mediated device state
- Document ap_config sysfs attribute
- Function os_info_old_init() is expected to be called only from a
regular kdump kernel. Enable it to be called from a stand-alone dump
kernel
- Address gcc -Warray-bounds warning and fix array size in struct
os_info
- s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks
- Use unwinder instead of __builtin_return_address() with ftrace to
prevent returning of undefined values
- Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is
disabled
- Compile kernel with -fPIC and link with -no-pie to allow kpatch
feature always succeed and drop the whole CONFIG_PIE_BUILD
option-enabled code
- Add missing virt_to_phys() converter for VSIE facility and crypto
control blocks
* tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
Revert "s390: Relocate vmlinux ELF data to virtual address space"
KVM: s390: vsie: Use virt_to_phys for crypto control block
s390: Relocate vmlinux ELF data to virtual address space
s390: Compile kernel with -fPIC and link with -no-pie
s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD
s390/ftrace: Use unwinder instead of __builtin_return_address()
s390/pci: Drop unneeded reference to CONFIG_DMI
s390/os_info: Fix array size in struct os_info
s390/os_info: Initialize old os_info in standalone dump kernel
docs: Update s390 vfio-ap doc for ap_config sysfs attribute
s390/vfio-ap: Add write support to sysfs attr ap_config
s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue
s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state
s390/ap: Externalize AP bus specific bitmap reading function
s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests
mm/userfaultfd: Do not place zeropages when zeropages are disallowed
s390/expoline: Make modules use kernel expolines
s390/nospec: Correct modules thunk offset calculation
s390/boot: Do not rescue .vmlinux.relocs section
s390/boot: Rework deployment of the kernel image
...
Use -EBUSY instead of -EAGAIN in zcrypt_ccamisc.c
in cases where the CCA card returns 8/2290 to indicate
a temporarily unavailability of this function.
Fixes: ed6776c96c ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
An EP11 reply cprb contains a field ret_code which may
hold an error code different than the error code stored
in the payload of the cprb. As of now all the EP11 misc
functions do not evaluate this field but focus on the
error code in the payload.
Before checking the payload error, first the cprb error
field should be evaluated which is introduced with this
patch.
If the return code value 0x000c0003 is seen, this
indicates a busy situation which is reflected by
-EBUSY in the zcrpyt_ep11misc.c low level function.
A higher level caller should consider to retry after
waiting a dedicated duration (say 1 second).
Fixes: ed6776c96c ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Fix wrong format string debug feature: %04x was used
to print out a 32 bit value. - changed to %08x.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Allow writing a complete set of masks to ap_config. Doing so will
cause the vfio-ap driver to replace the vfio-ap mediated device's
matrix masks with the given set of masks. If the given state cannot
be set, then no changes are made to the vfio-ap mediated device.
The format of the data written to ap_config is as follows:
{amask},{dmask},{cmask}\n
\n is a newline character.
amask, dmask, and cmask are masks identifying which adapters, domains,
and control domains should be assigned to the mediated device.
The format of a mask is as follows:
0xNN..NN
Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
The leftmost (highest order) bit represents adapter/domain 0.
For an example set of masks that represent your mdev's current
configuration, simply cat ap_config.
This attribute is intended to be used by an mdevctl callout script
supporting the mdev type vfio_ap-passthrough to atomically update a
vfio-ap mediated device's state.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-5-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
vfio_ap_mdev_link_queue is changed to detect if a matrix_mdev has
already linked the given queue. If so, it bails out.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-4-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add ap_config sysfs attribute. This will provide the means for
setting or displaying the adapters, domains and control domains assigned
to the vfio-ap mediated device in a single operation. This sysfs
attribute is comprised of three masks: One for adapters, one for domains,
and one for control domains.
This attribute is intended to be used by mdevctl to query a vfio-ap
mediated device's state.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-3-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Rename hex2bitmap() to ap_hex2bitmap() and export it for external
use. This function will be used by the implementation of the vfio-ap
ap_config sysfs attribute.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-2-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The configuration option ZCRYPT_DEBUG is used only in ap queue code,
so rename it to AP_DEBUG. It also no longer depends on ZCRYPT but on
AP. While at it, also update the help text.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
There is no hard requirement to have the ap bus statically in the
kernel, so add an option to compile it as module.
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The direct dependency of chsc and the AP bus prevents the
modularization of ap bus. Introduce a notifier interface for AP
changes, which decouples the producer of the change events (chsc) from
the consumer (ap_bus).
Remove the ap_cfg_chg() interface and replace it with the notifier
invocation. The ap bus module registers a notification handler, which
triggers the AP bus scan.
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The IRQ handler may rely on the bus or the root device. Register the
adapter IRQ after setting up the bus and the root device to avoid any
race conditions.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Rework the ap initialization and add missing cleanups to the error path.
Errors during the registration of IRQ handler is now also detected.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Since qci is available on most of the current machines, move away from
the dynamic buffers for qci information and store it instead in a
statically defined buffer.
The new flags member in struct ap_config_info is now used as an
indicator, if qci is available in the system (at least one of these
bits is set).
Suggested-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the zcrypt_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-1-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch reworks and improves the pkey retry behavior for the
pkey_ep11key2pkey() function. In contrast to the pkey_skey2pkey()
function which is used to trigger a protected key derivation from an
CCA secure data or cipher key the EP11 counterpart function had no
proper retry loop implemented. This patch now introduces code which
acts similar to the retry already done for CCA keys for this function
used for EP11 keys.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch reworks and improves the zcrypt retry behavior:
- The zcrypt_rescan_req counter has been removed. This
counter variable has been increased on some transport
errors and was used as a gatekeeper for AP bus rescans.
- Rework of the zcrypt_process_rescan() function to not
use the above counter variable any more. Instead now
always the ap_bus_force_rescan() function is called
(as this has been improved with a previous patch).
- As the zcrpyt_process_rescan() function is called in
all cprb send functions in case of the first attempt
to send failed with ENODEV now before the next attempt
to send an cprb is started.
- Introduce a define ZCRYPT_WAIT_BINDINGS_COMPLETE_MS
for the amount of milliseconds to have the zcrypt API
wait for AP bindings complete. This amount has been
reduced to 30s (was 60s). Some playing around showed
that 30s is a really fair limit.
The result of the above together with the patches to
improve the AP scan bus functions is that after the
first loop of cprb send retries when the result is a
ENODEV the AP bus scan is always triggered (synchronous).
If the AP bus scan detects changes in the configuration,
all the send functions now retry when the first attempt
was failing with ENODEV in the hope that now a suitable
device has appeared.
About concurrency: The ap_bus_force_rescan() uses a mutex
to ensure only one active AP bus scan is running. Another
caller of this function is blocked as long as the scan is
running but does not cause yet another scan. Instead the
result of the 'other' scan is used. This affects only tasks
which run into an initial ENODEV. Tasks with successful
delivery of cprbs will never invoke the bus scan and thus
never get blocked by the mutex.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The both functions zcrypt_send_cprb() and zcrypt_send_ep11_cprb()
are used to send CPRBs in-kernel from different sources. For
example the pkey module may call one of the functions in
zcrypt_ep11misc.c to trigger a derive of a protected key from
a secure key blob via an existing crypto card. These both
functions are then the internal API to send the CPRB and
receive the response.
All the ioctl functions to send an CPRB down to the addressed
crypto card use some kind of retry mechanism. When the first
attempt fails with ENODEV, a bus rescan is triggered and a
loop with retries is carried out.
For the both named internal functions there was never any
retry attempt made. This patch now introduces the retry code
even for this both internal functions to have effectively
same behavior on sending an CPRB from an in-kernel source
and sending an CPRB from userspace via ioctl.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rework the invocations around ap_scan_bus():
- Protect ap_scan_bus() with a mutex to make sure only one
scan at a time is running.
- The workqueue invocation which is triggered by either the
module init or via AP bus scan timer expiration uses this
mutex and if there is already a scan running, the work
is simple aborted (as the job is done by another task).
- The ap_bus_force_rescan() which is invoked by higher level
layers mostly on failures which indicate a bus scan may
help is reworked to call ap_scan_bus() direct instead of
enqueuing work into a system workqueue and waiting for that
to finish. Of course the mutex is respected and in case of
another task already running a bus scan the shortcut of
waiting for this scan to finish and reusing the scan result
is taken.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The AP scan bus function now returns true if there have
been any config changes detected. This will become
important in a follow up patch which will exploit this
hint for further actions. This also required to have
the AP scan bus timer callback reworked as the function
signature has changed to bool ap_scan_bus(void).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch tries to clarify the functions and variables
around the AP scan bus job. All these variables and
functions start with ap_scan_bus and are declared in
one place now.
No functional changes in this patch - only renaming and
move of code or declarations.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
