- Add register definitions for MT8188
- Add VDOSYS1 routing table
- Update MUTEX definitions accordingly
- Set VSYNC length from 0x40 (default) to 1 since ETHDR is bypassed
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add MT8188 VPPSYS0 and VPPSYS1 driver data.
Signed-off-by: yu-chang.lee <yu-chang.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8186 svs has a number of banks which used as optimization of opp
voltage table for corresponding dvfs drivers.
MT8186 svs big core uses 2-line high bank and low bank to optimize the
voltage of opp table for higher and lower frequency respectively.
Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8195 svs gpu uses 2-line high bank and low bank to optimize the
voltage of opp table for higher and lower frequency respectively.
Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware drivers.
- Arm FF-A firmware support gains support for v1.1 specification features,
in particular notification and memory transaction descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic,
atmel, tegra, aspeed, vexpress, mediatek, samsung and more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC10IACgkQYKtH/8kJ
UifFoQ//Tw7aux88EA2UkyL2Wulv80NwRQn3tQlxI/6ltjBX64yeQ6Y8OzmYdSYK
20NEpbU7VWOFftN+D6Jp1HLrvfi0OV9uJn3WiTX3ChgDXixpOXo4TYgNNTlb9uZ4
MrSTG3NkS27m/oTaCmYprOObgSNLq1FRCGIP7w4U9gyMk9N9FSKMpSJjlH06qPz6
WBLTaIwPgBsyrLfCdxfA1y7AFCAHVxQJO4bp0VWSIalTrneGTeQrd2FgYMUesQ2e
fIUNCaU4mpmj8XnQ/W19Wsek8FRB+fOh0hn/Gl+iHYibpxusIsn7bkdZ5BOJn2J0
OY3C1biopaaxXcZ+wmnX9X0ieZ3TDsHzYOEf0zmNGzMZaZkV8kQt4/Ykv77xz6Gc
4Bl6JI5QZ4rTZvlHYGMYxhy3hKuB31mO2rHbei7eR7J7UmjzWcl5P6HYfCgj7wzH
crIWj1IR1Nx6Dt/wXf3HlRcEiAEJ2D0M3KIFjAVT239TsxacBfDrRk+YedF2bKbn
WMYfVM6jJnPOykGg/gMRlttS/o/7TqHBl3y/900Idiijcm3cRPbQ+uKfkpHXftN/
2vOtsw7pzEg7QQI9GVrb4drTrLvYJ7GQOi4o0twXTCshlXUk2V684jvHt0emFkdX
ew9Zft4YLAYSmuJ3XqGhhMP63FsHKMlB1aSTKKPeswdIJmrdO80=
=QIut
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230925095532.1984344-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230925095532.1984344-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Add support voltage bins turn point
Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230921052637.30444-4-chun-jen.tseng@mediatek.com
MT8188 svs gpu uses 2-line high bank and low bank to optimize the
voltage of opp table for higher and lower frequency respectively.
Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230921052637.30444-3-chun-jen.tseng@mediatek.com
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <linux-mediatek@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files
are handled.
-----BEGIN PGP SIGNATURE-----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=c9NM
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230803-dt-header-cleanups-for-soc-v2-19-d8de2cc88bff@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To simplify with maintenance let's move the mediatek power-domain drivers
to the new genpd directory. Going forward, patches are intended to be
managed through a separate git tree, according to MAINTAINERS.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <linux-mediatek@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Device tree node names should be generic. The planned device node name
for the GPU, according to the bindings and posted DT changes, is "gpu",
not "mali".
Fix the GPU node name in the SVS driver to follow.
Fixes: 0bbb09b2af ("soc: mediatek: SVS: add mt8192 SVS GPU driver")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230531063532.2240038-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the necessary bits to support the MT6795 Helio X10 smartphone SoC:
this is always paired with a MT6331 PMIC, with MT6332 companion.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230412131216.198313-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for the MT6331 PMIC and for its companion MT6332 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230412131216.198313-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Some PMICs are designed to work with a companion part, which provides
more regulators and/or companion devices such as LED controllers,
display backlight controllers, battery charging, fuel gauge, etc:
this kind of PMICs are usually present in smartphone platforms, where
tight integration is required.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230412131216.198313-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In preparation for adding new members with name abbreviations describe
the struct pwrap_slv_type with kerneldoc to enhance human readability.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230412131216.198313-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The PMIC read test is performed in two places: pwrap_init_dual_io()
and pwrap_init_sidly().
In preparation for adding support for PMICs requiring a companion
part, move this sequence to a new function pwrap_pmic_read_test().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230412131216.198313-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to stop
including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to convert
more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones
that didn't get picked up elsewhere.
-----BEGIN PGP SIGNATURE-----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=89Zj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
Removing the include of cpu.h from of_device.h (included by
of_platform.h) causes an error:
drivers/soc/mediatek/mtk-svs.c:2134:41: error: implicit declaration of function 'get_cpu_device'; did you mean 'get_swap_device'? [-Werror=implicit-function-declaration]
of_platform.h is still needed for of_find_device_by_node().
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-13-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The mtk-mmsys and mutex drivers do have a dependency on MTK_CMDQ,
even though both can work with *or* without it: since CMDQ support
can be enabled either as module or as built-in, it is necessary to
add a depends rule in Kconfig, so that we disallow building both
mtk-mmsys and mtk-mutex as built-in if mtk-cmdq-helper is built as
a module, otherwise obvious linker issues appear.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230403093304.276418-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Replace the open-code with dev_err_probe() to simplify the code.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/202303241017290414354@zte.com.cn
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add MMSYS support for the MT6795 SoC using the same mmsys routing
table as MT8173 as, for the currently supported usecases (DSI0, DPI0
with no WDMA), these are identical.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230309102618.114157-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The MT8173 SoC has 64 MMSYS resets, split in two contiguous 32-bits
registers, MMSYS_SW0_RST_B (0x140) and MMSYS_SW1_RST_B (0x144), as
also stated in the downstream kernel for the Amazon Fire TV 2
(Sloane) in the ddp_reg.h header.
Please note that managing more than 32 reset bits is supported since commit
2004f8be84 ("soc: mediatek: mmsys: add mmsys for support 64 reset bits")
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230309102618.114157-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT2701, MT2712 and MT8173 were relying on a "default" DDP I/O routing
table, describing all of the possible connections between display block
components: while this is definitely working it's suboptimal for the
actual routing description, as we may be enabling outputs and inputs
that are not needed, possibly impacting on actual DDP performance other
than slightly prolonging boot times by having to parse a table that is
bigger than needed.
Seen that all of the other supported SoCs have got their own table and
seen that a comment in mtk-mmsys.h explicitly mentions that the wanted
way is to have one table per SoC, create a new routing table that is
specifically tailored to MT8173 and, while at it, remove mentions to
said SoC from the comment in mtk-mmsys.h.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230309102618.114157-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Now that the mtk-cmdq.h header contains inline functions for cases
in which the driver is not enabled (either module or built-in), we
can safely go on with cleaning up ifdefs for CMDQ handling.
This also shows in a clearer manner that writing through CMDQ HW is
optional and used only for performance purposes when/where wanted,
needed and/or required.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230222094253.23678-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Replace open-coded init/exit calls with the module_platform_driver()
macro being equivalent.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230222094253.23678-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Replace the magic number "10", defining the maximum number of supported
handles with a MTK_MUTEX_MAX_HANDLES definition.
While at it, also change the type for `id` from a signed integer to
a unsigned 8 bits integer to save some (small) memory footprint, as
this number is never higher than 10.
This cleanup brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230222094253.23678-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Compress entries of the of_match_mtk_mmsys array to reduce the amount
of lines and increase readability; this brings us to a maximum of 95
columns.
While at it, also add a sentinel comment to the last entry for the
sole purpose of consistency.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230222094253.23678-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Allow module auto-loading by adding a MODULE_DEVICE_TABLE for
of_match_mmsys.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230222094253.23678-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Compress entries of the of_match_mtk_mmsys array to reduce the amount
of lines and increase readability; this brings us to a maximum of 90
columns.
While at it, also add a sentinel comment to the last entry for the
sole purpose of consistency.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230222094253.23678-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Instead of open-coding init/exit calls, switch to using the
module_platform_driver() macro instead, doing the exact same.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230222094253.23678-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a .remove() callback to correctly unregister the multimedia clocks
and DRM drivers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230222094253.23678-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Some extreme test environment may keep IC temperature very low or very high
during system boot stage. For stability concern, we add thermal voltage
compenstation if needed no matter svs bank phase is in init02 or mon mode.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230202124104.16504-4-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The function svs_add_device_link is called only internally from the SoC
specific probe functions. We don't need to check if the node_name is
null because that would mean that we have a buggy SoC probe function in
the first place.
Reviewed-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230209162403.21113-1-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add MT8195 VPPSYS0 and VPPSYS1 mutex info to driver data
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Change-Id: Ie371dc9dcf35ea308d9460acd60fb9c3d6475deb
Link: https://lore.kernel.org/r/20230206091109.1324-7-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mtk_mutex_set_mod support to set MOD1
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230206091109.1324-6-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Due to MT8195 HW design, some RSZs have additional settings that
need to be configured in MMSYS.
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Change-Id: I41978bf14951221c88abbe70d8c24cb0770e11e3
Link: https://lore.kernel.org/r/20230206091109.1324-5-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The timing of disabling SVS bank and restore default voltage is more
than one place. Therefore, add a common function to use for removing
the superfluous codes.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230202124104.16504-3-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
SVS might need to read both svs efuse and thermal efuse on the probe flow.
Therefore, add a common efuse read function to remove the superfluous
codes.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230202124104.16504-2-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch adds missing MODULE_DEVICE_TABLE definition
which generates correct modalias for automatic loading
of this driver when it is built as an external module.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20220928151346.1942977-1-zengheng4@huawei.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This driver does exactly devm_clk_get() and clk_prepare_enable() right
after, which is exactly what devm_clk_get_enabled() does: clean that
up by switching to the latter.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221006110935.59695-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The o_slope value is dependent of the o_slope_sign, refactor code to get
rid of unnecessary if constructs.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230111074528.29354-15-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The platform name and efuse parsing function pointer are only used while
probing the device. Use them from the svs_platform_data struct instead.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-12-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Moving svs_platform_probe into driver probe function will allow us to
reduce svs_platform members. This will be done in a follow-up patch.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-11-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If a compatible misses a match data entry, then something is wrong in
the development phase, we don't need to check for that at runtime.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-10-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
We only ever call the SoC specific probe function from
svs_platform_probe. No need to carry that function in a global
datastructure around.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-9-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Some projects might not support CONFIG_DEBUG_FS but still needs svs to be
alive. Therefore, enclose debug cmd codes with CONFIG_DEBUG_FS to make sure
svs can be alive when CONFIG_DEBUG_FS not supported.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-8-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
svs_init01() calls pm_runtime_get_sync() and added fail path as
svs_init01_finish to put usage_counter. However, pm_runtime_get_sync()
will increment usage_counter even it failed. Fix it by replacing it with
pm_runtime_resume_and_get() to keep usage counter balanced.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230111074528.29354-5-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If svs init02 fail, it means we cannot rely on svs bank voltages anymore.
We need to disable svs function and restore DVFS opp voltages back to the
default voltages for making sure we have enough DVFS voltages.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Fixes: 0bbb09b2af ("soc: mediatek: SVS: add mt8192 SVS GPU driver")
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-2-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This driver currently deals with GPU-SRAM regulator coupling, ensuring
that the SRAM voltage is always between a specific range of distance to
the GPU voltage, depending on the SoC, necessary in order to achieve
system stability across the full range of supported GPU frequencies.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Link: https://lore.kernel.org/r/20221006115816.66853-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If the system does not come from reset (like when is booted via
kexec()), the peripheral might triger an IRQ before the data structures
are initialised.
Fixes:
[ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08
[ 0.227913] Call trace:
[ 0.227918] svs_isr+0x8c/0x538
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20221127-mtk-svs-v2-0-145b07663ea8@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mtk-mutex support for mt8195 vdosys1.
The vdosys1 path component contains ovl_adaptor, merge5,
and dp_intf1. Ovl_adaptor is composed of several sub-elements
which include MDP_RDMA0~7, MERGE0~3, and ETHDR.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-12-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mtk-mutex DDP_COMPONENT_DP_INTF1 component. The MT8195 vdosys1 path
component contains ovl_adaptor, merge5, and dp_intf1. It is a preparation
for adding support for MT8195 vdosys1 path component.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-11-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT8195 vdosys1 has more than 32 reset bits and a different reset base
than other chips. Add the number of reset bits and reset base in mmsys
private data.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-10-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mmsys for support 64 reset bits. It is a preparation for MT8195
vdosys1 HW reset. MT8195 vdosys1 has more than 32 reset bits.
1. Add the number of reset bits in mmsys private data
2. move the whole "reset register code section" behind the
"get mmsys->data" code section for getting the num_resets in mmsys->data.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230113104434.28023-9-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.
If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-8-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add four mmsys config APIs. The config APIs are used for config
mmsys reg. Some mmsys regs need to be set according to the
HW engine binding to the mmsys simultaneously.
1. mtk_mmsys_merge_async_config: config merge async width/height.
async is used for cross-clock domain synchronization.
2. mtk_mmsys_hdr_confing: config hdr backend async width/height.
3. mtk_mmsys_mixer_in_config and mtk_mmsys_mixer_in_config:
config mixer related settings.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-7-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Simplify code for update mmsys reg.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230113104434.28023-6-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mt8195 vdosys1 routing table to the driver data of mtk-mmsys.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-5-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In some chipsets, we need to disable EXT_BUCK_ISO before turning on the
specific power pm-domains (mtcmos), such as ADSP in MT8192 and CAM_VCORE
in MT8188.
Add the MTK_SCPD_EXT_BUCK_ISO flag to control the buck isolation setting
in the mediatek power domain driver.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230117032640.13504-3-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add buck isolation offset and mask to power domain data.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230117032640.13504-2-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add domain control data including bus protection data size
change due to more protection steps in mt8188.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221223080553.9397-3-Garmin.Chang@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In the use case of configuring the access permissions of the ADSP core,
the mt8186 SoC ADSP power will be switched on in the bootloader because
the permission control registers are located in the ADSP subsys.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Fixes: 88590cbc17 ("soc: mediatek: pm-domains: Add support for mt8186")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221012075434.30009-1-tinghan.shen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
add mtk-mutex support for mt8188 vdosys0.
Signed-off-by: amy zhang <Amy.Zhang@mediatek.com>
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221206020046.11333-6-nathan.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
These are a couple of build fixes from randconfig testing,
plus a set of Mediatek SoC specific fixes, all trivial.
-----BEGIN PGP SIGNATURE-----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=qUCm
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of build fixes from randconfig testing, plus a set
of Mediatek SoC specific fixes, all trivial"
* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: tegra: fix CPU_BIG_ENDIAN dependencies
ARM: disallow pre-ARMv5 builds with ld.lld
ARM: pxa: fix building with clang
MAINTAINERS: add related dts to IXP4xx
ARM: dts: spear: drop 0x from unit address
arm64: dts: mt8183: Fix Mali GPU clock
arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
soc: mediatek: pm-domains: Fix the power glitch issue
Power reset maybe generate unexpected signal. In order to avoid
the glitch issue, we need to enable isolation first to guarantee the
stable signal when power reset is triggered.
Fixes: 59b644b01c ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221014102029.1162-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
For backward compatibility we add the deprecated compatible.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221111082912.14557-1-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT8365 requires an extra 2 clocks to be enabled to behave correctly.
Add support these 2 clocks, they are made optional since they seem to
be present only on MT8365.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Fadwa CHIBY <fchiby@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221031093401.22916-3-fchiby@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This reverts commit b804923b7c.
Due to the compatible changing of mt8195 from "mediatek,mt8195-mmsys"
to "mediatek,mt8195-vdosys0", we have to revert this patch and send a
new patch with the new compatible.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220927152704.12018-3-jason-jh.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The difference between MT8186 and other ICs is that when modifying the
output format, we need to modify the mmsys_base+0x400 register to take
effect. So when setting the dpi output format, we need to call
mtk_mmsys_ddp_dpi_fmt_config to set it to MT8186 synchronously.
Commit a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi
output for MT8186") lacked some of the possible output formats and also
had a wrong bitmask.
Add the missing output formats and fix the bitmask.
While at it, also update mtk_mmsys_ddp_dpi_fmt_config() to use generic
formats, so that it is slightly easier to extend for other platforms.
Fixes: a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi output for MT8186")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
Add mmsys func to manipulate dpi output format config for MT8186.
Co-developed-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: Nís F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/all/1663161662-1598-2-git-send-email-xinlei.lee@mediatek.com/
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT6795 has the same mutex mod/sof register layout as MT2712 and MT8173,
but supports only four SOF, as it has two DSI and one DPI.
Support is added by reusing most of the MT8173 data, with the addition
of a mt6795-specific SOF array (and devicetree compatible, of course).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220913140121.403637-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mt8186 mutex mod settings for mdp3.
Co-developed-by: Xiandong Wang <xiandong.wang@mediatek.com>
Signed-off-by: Xiandong Wang <xiandong.wang@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220831172151.10215-3-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Commit a92438c5a3 ("soc: mediatek: mtk-svs: Use bitfield access macros
where possible") introduced the use of FIELD_GET and FIELD_PREP macros,
which are defined in the bitfield header. Add an explicit include for it
so we're sure to have the symbols defined independently of the config.
Fixes: a92438c5a3 ("soc: mediatek: mtk-svs: Use bitfield access macros where possible")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220829204439.3748648-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In order to enhance readability and safety during registers setup
and value retrieval, redefine a few register related macros and
convert all open-coded instances of bitfield setting/retrieval
to use the FIELD_PREP() and FIELD_GET() macros.
While at it, some macros were renamed to further enhance readability.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220825184616.2118870-3-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Commonize the repeating pattern for reading the "t-calibration-data"
efuse data in a new function svs_thermal_efuse_get_data(), reducing
the size of this driver.
No functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220825184616.2118870-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In error cases, this driver never calls dev_pm_opp_of_remove_table():
instead of doing that, simple switch to a devm variant, which will
automagically do that for us.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220726141653.177948-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If CONFIG_OF is not set, we get a -Wunused-const-variable: dropping
of_match_ptr() solves that issue.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220726141653.177948-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Instead of using irq_of_parse_and_map() to retrieve the interrupt from
devicetree, switch to platform_get_irq() instead: this function will
conveniently also write an error message in case the irq is not found.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220726141653.177948-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
With the following configuration options:
CONFIG_OF is not set
CONFIG_MTK_PMIC_WRAP=y
CONFIG_MTK_SCPSYS=y
we get the following build warnings:
CC drivers/soc/mediatek/mtk-pmic-wrap.o
drivers/soc/mediatek/mtk-pmic-wrap.c:2138:34: warning: ‘of_pwrap_match_tbl’ defined but not used [-Wunused-const-variable=]
drivers/soc/mediatek/mtk-pmic-wrap.c:1953:34: warning: ‘of_slave_match_tbl’ defined but not used [-Wunused-const-variable=]
CC drivers/soc/mediatek/mtk-scpsys.o
drivers/soc/mediatek/mtk-scpsys.c:1084:34: warning: ‘of_scpsys_match_tbl’ defined but not used [-Wunused-const-variable=]
Looking at the code, both drivers can only bind to OF-defined device
nodes, so these drivers are useless without OF and should therefore
depend on it.
Also drop of_match_ptr() from both drivers. We already know what it
will resolve to, so we might as well save cpp some work.
Developers or QA teams who wish to test-build the code can still do
so by enabling CONFIG_OF, which is available on all architectures and
has no dependencies.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202207240252.ZY5hSCNB-lkp@intel.com/
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chenglin Xu <chenglin.xu@mediatek.com>
Link: https://lore.kernel.org/r/20220730144833.0a0d9825@endymion.delvare
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
While at it, also remove a redundant call to of_address_to_resource(),
as this was getting the address of the same resource index 0: we can
as well get the iostart from the 'regs' pointer.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623121701.107512-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
When building this driver for an architecture that does not support
CONFIG_PM_SLEEP, such as hexagon, the following warnings occur:
drivers/soc/mediatek/mtk-svs.c:1481:12: error: unused function 'svs_suspend' [-Werror,-Wunused-function]
static int svs_suspend(struct device *dev)
^
drivers/soc/mediatek/mtk-svs.c:1515:12: error: unused function 'svs_resume' [-Werror,-Wunused-function]
static int svs_resume(struct device *dev)
^
2 errors generated.
This happens because SIMPLE_DEV_PM_OPS uses SET_SYSTEM_SLEEP_PM_OPS,
which evaluates to nothing when CONFIG_PM_SLEEP is not set, leaving the
functions unused in the eyes of the compiler.
This problem was rectified in commit 1a3c7bb088 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones") with new macros. Use
DEFINE_SIMPLE_DEV_PM_OPS to fix the warning while not changing
svs_pm_ops when CONFIG_PM_SLEEP is set.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220622175649.1856337-1-nathan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MediaTek SoCs have multiple MFG power-domains, exclusively used for
the GPU which, in turn, requires external power supplies: make sure
to have the MTK_SCPD_DOMAIN_SUPPLY cap on the two topmost MFGs to
allow voting for regulators on/off upon usage of these power domains.
This also ensures that the SRAM is actually powered and that we're
not relying on the bootloader leaving this supply on when performing
the first (and latter) poweron sequence for these domains' sram.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623123850.110225-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
