Add support for R-Car S4-8 (R8A779F0) to the R-Car RST driver.
The register map of R-Car S4-8 is the same as R-Car V3U so that
renames "V3U" and "r8a779a0" to "Gen4".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20211201073308.1003945-11-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently renesas_soc_init() scans the whole device tree up to three
times, to find a device node describing a product register.
Furthermore, the product register handling for the different variants is
very similar, with the major difference being the location of the
product bitfield inside the product register.
Reduce scanning to a single pass using of_find_matching_node_and_match()
instead. Switch to a common handling of product registers, by storing
the intrinsics of each product register type in the data field of the
corresponding match entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/057721f46c7499de4133135488f0f3da7fb39265.1636570669.git.geert+renesas@glider.be
R-Car Gen3 SoC series has a realtime processor, the boot
address of this processor can be set thanks to CR7BAR register
of the reset module.
Export this function so that it's possible to set the boot
address from a remoteproc driver.
Also drop the __initdata qualifier on rcar_rst_base,
since we will use this address later than init time.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Link: https://lore.kernel.org/r/20211022122101.66998-1-julien.massot@iot.bzh
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for identifying the remaining R-Car Gen3e SoCs: R-Car H3e
(R8A779M0), M3e (R8A779M2), M3Ne (R8A779M4), M3Ne-2G (R8A779M5), E3e
(R8A779M6), D3e (R8A779M7), and H3Ne (R8A779M8).
As these are different gradings of the already supported R-Car Gen3
SoCs, support for them is enabled through the existing ARCH_R8A779*
configuration symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ccf2206b24147b3d977e4119bbdefaedceb28644.1628766192.git.geert+renesas@glider.be
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. So, use memcpy() as a safe replacement.
This is a previous step in the path to remove the strcpy() function
entirely from the kernel.
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210808125012.4715-3-len.baker@gmx.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for identifying the R-Car H3e-2G (R8A779M1) and R-Car M3e-2G
(R8A779M3) SoCs.
As these are different gradings of the already supported R-Car H3 ES3.0
(R8A77951) and M3-W+ (R8A77961) SoCs, support for them is enabled
through the existing ARCH_R8A77951 and ARCH_R8A77961 configuration
symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/42b4578ab4739cb48ec3aed0a447fc40c34de1e5.1626708063.git.geert+renesas@glider.be
Add support for reading the LSI DEVID register which is present in
SYSC block of RZ/G2{L,LC} SoC's.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609163717.3083-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add ARCH_R9A07G044 as a configuration symbol for the new Renesas
RZ/G2L SoC variants.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently, there are two drivers binding to the R-Mobile System
Controller (SYSC):
- The rmobile-sysc driver registers PM domains from a core_initcall(),
and does not use a platform driver,
- The optional rmobile-reset driver registers a reset handler, and
does use a platform driver.
As fw_devlink only considers devices, commit bab2d712ee ("PM:
domains: Mark fwnodes when their powerdomain is added/removed") works
only for PM Domain drivers where the DT node is a real device node, and
not for PM Domain drivers using a hierarchical representation inside a
subnode. Hence if fw_devlink is enabled, probing of on-chip devices
that are part of the SYSC PM domain is deferred until the optional
rmobile-reset driver has been bound. If the rmobile-reset driver is
not available, this will never happen, and thus lead to complete system
boot failures.
Fix this by explicitly marking the fwnode initialized.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210216123958.3180014-1-geert+renesas@glider.be
As of commit b587288001 ("ARM: shmobile: R-Mobile: Remove legacy
PM Domain code"), the R-Mobile System Controller driver no longer
handles the adding of platform devices to PM Domains, but delegates that
to the PM Domain core code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210205132141.1920137-1-geert+renesas@glider.be
The R-Car System Controller (SYSC) driver registers PM domains from an
early_initcall(). It does not use a platform driver, as secondary CPU
startup on R-Car H1 needs to control the CPU power domains, before
initialization of the driver framework.
As fw_devlink only considers devices, it does not know that the System
Controller is ready. Hence probing of on-chip devices that are part of
the SYSC PM domain fails if fw_devlink is enabled:
probe deferral - supplier e6180000.system-controller not ready
Fix this by setting the OF_POPULATED flag for the SYSC device node after
successful initialization. This will make of_link_to_phandle() ignore
the SYSC device node as a dependency, and consumer devices will be
probed again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210128082847.2205950-1-geert+renesas@glider.be
There is no reason to keep on using the __raw_{read,write}l() I/O
accessors in Renesas ARM driver code. Switch to using the plain
{read,write}l() I/O accessors, to have a chance that this works on
big-endian.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201119125214.4065925-1-geert+renesas@glider.be
This code needs to call iounmap() on one error path.
Fixes: 2173fc7cb6 ("ARM: shmobile: R-Mobile: Add DT support for PM domains")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200923113142.GC1473821@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for R-Car V3U (R8A779A0) SoC power areas and register
access, because register specification differs from R-Car Gen2/3.
Inspired by patches in the BSP by Tho Vu.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599810232-29035-5-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
For easy understanding of architecture and alphabetical merging, this
patch uses ARM32/ARM64 for description.
This prepares for sorting the menu.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bliiv54u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Now, Renesas SoC drivers are under menu, but current descriptions are
not aligned.
This patch aligns them.
- Emma Mobile EV2
- RZ/A1H (R7S72100)
...
- R-Car H2 (R8A77900)
...
- Renesas R-Car H3 ES1.x SoC Platform
...
- R-Car H2 System Controller support
- R-Car M2-W/N System Controller support
- R-Car V2H System Controller support
- R-Car E2 System Controller support
- R-Car H3 System Controller support
- R-Car M3-W System Controller support
- R-Car M3-W+ System Controller support
- R-Car M3-N System Controller support
+ SoC Platform support for Emma Mobile EV2
+ SoC Platform support for RZ/A1H+
...
+ SoC Platform support for R-Car H2
...
+ SoC Platform support for R-Car H3 ES1.x
...
+ System Controller support for R-Car H2
+ System Controller support for R-Car M2-W/N
+ System Controller support for R-Car V2H
+ System Controller support for R-Car E2
+ System Controller support for R-Car H3
+ System Controller support for R-Car M3-W
+ System Controller support for R-Car M3-W+
+ System Controller support for R-Car M3-N
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zh6kyedc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas related SoC settings are located on TOP level menu,
thus it is very verbose.
This patch groups Renesas related settings into
"Renesas SoC driver support" menu.
And it aligns config menu names.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0xxho7t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
These are the usual updates for SoC specific device drivers and related
subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qbsP
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
Replace the final user of CONFIG_ARCH_R8A7795 by CONFIG_ARCH_R8A77950 ||
CONFIG_ARCH_R8A77951, and remove the now unused CONFIG_ARCH_R8A7795
symbol definition.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200218112449.5723-1-geert+renesas@glider.be
This patch corrects the SPDX License Identifier style in
header file related to Renesas Soc driver support.
It assigns explicit block comment to the SPDX License Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Link: https://lore.kernel.org/r/20200118124856.GA3421@nishad
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
SH-Mobile AG5 and R-Car H1 SoCs are based on the Cortex-A9 MPCore, which
includes a global timer.
Enable the ARM global timer on these SoCs, which will be used for:
- the scheduler clock, improving scheduler accuracy from 10 ms to 3 or
4 ns,
- delay loops, allowing removal of calls to shmobile_init_delay() from
the corresponding machine vectors.
Note that when using an old DTB lacking the global timer, the kernel
will still work. However, loops-per-jiffies will no longer be preset,
and the delay loop will need to be calibrated during boot.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191211135222.26770-5-geert+renesas@glider.be
Despite using the same compatible values ("r8a7795"-based) because of
historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+
(R8A77951) are really different SoCs, with different part numbers.
Reflect this in the SoC configuration, by adding CONFIG_ARCH_R8A77950
and CONFIG_ARCH_R8A77951 as new config symbols. These are intended to
replace CONFIG_ARCH_R8A7795, and will allow making support for early SoC
revisions optional.
Note that for now, CONFIG_ARCH_R8A7795 is retained, and just selects
CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951. This relaxes
dependencies of other subsystems on the SoC configuration symbol, and
provides a smooth transition path for config files through "make
oldconfig".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191217183841.432-6-geert+renesas@glider.be
The configure call back takes a register pointer, so should
have been marked with __iomem. Add this to silence the
following sparse warnings:
drivers/soc/renesas/rcar-rst.c:33:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
drivers/soc/renesas/rcar-rst.c:33:22: expected int ( *configure )( ... )
drivers/soc/renesas/rcar-rst.c:33:22: got int ( * )( ... )
drivers/soc/renesas/rcar-rst.c:97:40: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/renesas/rcar-rst.c:97:40: expected void *base
drivers/soc/renesas/rcar-rst.c:97:40: got void [noderef] <asn:2> *[assigned] base
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20191218135230.2610161-1-ben.dooks@codethink.co.uk
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the power areas in the Renesas R-Car M3-W+ (R8A77961)
SoC to the R-Car System Controller driver.
R-Car M3-W+ (aka R-Car M3-W ES3.0) is very similar to R-Car
M3-W (R8A77960), which allows for both SoCs to share a driver:
- R-Car M3-W+ lacks the A2VC power area, so its area must be
nullified,
- The existing support for the SYSCEXTMASK register added in commit
9bd645af9d2a49ac ("soc: renesas: r8a7796-sysc: Fix power request
conflicts") applies to ES3.0 and later only.
As R-Car M3-W+ uses a different compatible value, differentiate
based on that, instead of on the ES version.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-7-geert+renesas@glider.be
Add support for the Reset block in the R-Car M3-W+ (R8A77961) SoC to the
Renesas R-Car RST driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-6-geert+renesas@glider.be
Add support for identifying the R-Car M3-W+ (R8A77961) SoC, which shares
the Product ID Number with R-Car M3-W (R8A77960), but differs in CUT
Number (Ver. 3.0), and uses a different compatible value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-5-geert+renesas@glider.be
Add CONFIG_ARCH_R8A77961 as a configuration symbol for the new Renesas
R-Car M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-4-geert+renesas@glider.be
Add CONFIG_ARCH_R8A77960 as a new config symbol for R-Car M3-W
(R8A77960), to replace CONFIG_ARCH_R8A7796, and avoid confusion with
R-Car M3-W+ (R8A77961), which will use CONFIG_ARCH_R8A77961.
Note that for now, CONFIG_ARCH_R8A7796 is retained, and just selects
CONFIG_ARCH_R8A77960. This relaxes dependencies of other subsystems on
the SoC configuration symbol, and provides a smooth transition path for
config files through "make oldconfig".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-3-geert+renesas@glider.be
Rename CONFIG_SYSC_R8A7796 for R-Car M3-W (R8A77960) to
CONFIG_SYSC_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_SYSC_R8A77961.
Rename r8a7796_sysc_info and r8a7796_sysc_init for consistency.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-2-geert+renesas@glider.be
If the DTB for a device with an RZ/A2 SoC lacks a device node for the
BSID register, the ID validation code falls back to using a register at
address 0x0, which leads to undefined behavior (e.g. reading back a
random value).
This could be fixed by letting fam_rza2.reg point to the actual BSID
register. However, the hardcoded fallbacks were meant for backwards
compatibility with old DTBs only, not for new SoCs. Hence fix this by
validating renesas_family.reg before using it.
Fixes: 175f435f44 ("soc: renesas: identify RZ/A2")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191016143306.28995-1-geert+renesas@glider.be
No R-Car or RZ/G SYSC driver uses any of the definitions provided by
<linux/bug.h>, hence there is no need to include this header file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190920144705.27394-1-geert+renesas@glider.be
Describe the location and contents of the SYSCEXTMASK register on
RZ/G2E, to prevent conflicts between internal and external power
requests.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190920143523.23125-1-geert+renesas@glider.be
Describe the location and contents of the SYSCEXTMASK register on R-Car
E3, to prevent conflicts between internal and external power requests.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-8-geert+renesas@glider.be
Describe the location and contents of the SYSCEXTMASK register on R-Car
V3H, to prevent conflicts between internal and external power requests.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-7-geert+renesas@glider.be
Describe the location and contents of the SYSCEXTMASK register on R-Car
V3M, to prevent conflicts between internal and external power requests.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-6-geert+renesas@glider.be
Describe the location and contents of the SYSCEXTMASK register on R-Car
M3-N, to prevent conflicts between internal and external power requests.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-5-geert+renesas@glider.be
Describe the location and contents of the SYSCEXTMASK register on R-Car
M3-W, to prevent conflicts between internal and external power requests.
This register does not exist on R-Car M3-W ES1.x.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-4-geert+renesas@glider.be
Describe the location and contents of the SYSCEXTMASK register on R-Car
H3, to prevent conflicts between internal and external power requests.
This register does not exist on R-Car H3 ES1.x and ES2.x.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-3-geert+renesas@glider.be
Recent R-Car Gen3 SoCs added an External Request Mask Register to the
System Controller (SYSC). This register allows to mask external power
requests for CPU or 3DG domains, to prevent conflicts between powering
off CPU cores or the 3D Graphics Engine, and changing the state of
another power domain through SYSC, which could lead to CPG state machine
lock-ups.
Add support for making use of this register. Take into account that the
register is optional, and that its location and contents are
SoC-specific.
Note that the issue fixed by this cannot happen in the upstream kernel,
as upstream has no support for graphics acceleration yet. SoCs lacking
the External Request Mask Register may need a different mitigation in
the future.
Inspired by a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-2-geert+renesas@glider.be
ARM Erratum 754322 affects Cortex-A9 revisions r2p* and r3p*.
Automatically enable support code to mitigate the erratum when compiling
a kernel for any of the affected Renesas SoCs:
- RZ/A1: r3p0,
- R-Mobile A1: r2p4,
- R-Car M1A: r2p2-00rel0,
- R-Car H1: r3p0,
- SH-Mobile AG5: r2p2.
EMMA Mobile EV2 (r1p3) and RZ/A2 (r4p1) are not affected.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
ARM Erratum 814220 affects Cortex-A7 revisions r0p2-r0p5.
Automatically enable support code to mitigate the erratum when compiling
a kernel for any of the affected Renesas SoCs:
- R-Mobile APE6: r0p2,
- RZ/G1E: r0p5,
- RZ/G1C: r0p5,
- R-Car H2: r0p3,
- R-Car E2: r0p5,
- RZ/N1: r0p5.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Currently the R-Mobile "always-on" PM Domain is implemented by returning
-EBUSY from the generic_pm_domain.power_off() callback, and doing
nothing in the generic_pm_domain.power_on() callback. However, this
means the PM Domain core code is not aware of the semantics of this
special domain, leading to boot warnings like the following on
SH/R-Mobile SoCs:
sh_cmt e6130000.timer: PM domain c5 will not be powered off
Fix this by making the always-on nature of the domain explicit instead,
by setting the GENPD_FLAG_ALWAYS_ON flag. This removes the need for the
domain to provide power control callbacks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
As of commit 980532a5dd ("soc: renesas: rcar-sysc: Use
GENPD_FLAG_ALWAYS_ON"), the local variable "gov" is assigned just once,
so it can be eliminated.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
The local variable np in function rcar_sysc_pd_init takes the return
value of of_find_matching_node_and_match(), which gets a node but does
not put it. If np is not put before the function returns, it may cause
a memory leak.
Hence, remove the return statement that does not immediately follow a
putting of np. Replace it with a goto pointing to a pre-existing label
that first puts np and then returns the required value.
Issue found with Coccinelle.
Fixes: afa6f53df6 ("soc: renesas: rcar-sysc: Add support for fixing up power area tables")
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Flexible array members should be denoted using [] instead of [0], else
gcc will not warn when they are no longer at the end of the structure.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Auto-enable support for the RZ/A1 Interrupt Controller when configuring
a kernel which supports RZ/A1H or RZ/A2M SoCs.
Keep selects sorted while at it.
This is similar to how interrupt controllers for other Renesas SoCs are
enabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Product Register of R-Car M3-W ES1.3 incorrectly identifies the SoC
revision as ES2.1. Add a workaround to fix this.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The workaround for the wrong hierarchy of the 3DG-{A,B} power domains on
RZ/G2E ES1.0 corrected the parent domains. However, the 3DG-{A,B} power
domains were still initialized and powered in the wrong order, causing
3DG operation to fail.
Fix this by changing the order in the table at runtime, when running on
an affected SoC.
This work is based on the work done by Geert for R-Car E3.
Fixes: f37d211c68 ("soc: renesas: rcar-sysc: Add r8a774c0 support")
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
A number of Kconfig options have become available now to random ARM
platforms outside of ARCH_MULTIPLATFORM, which now causes Kconfig
warnings, and other build errors when those select options that
lack additional dependencies, e.g.:
WARNING: unmet direct dependencies detected for HAVE_ARM_ARCH_TIMER
Depends on [n]: CPU_V7 [=n]
Selected by [y]:
- ARCH_RCAR_GEN2 [=y] && SOC_RENESAS [=y]
- ARCH_R8A73A4 [=y] && SOC_RENESAS [=y] && ARM [=y]
WARNING: unmet direct dependencies detected for SYS_SUPPORTS_EM_STI
Depends on [n]: GENERIC_CLOCKEVENTS [=n]
Selected by [y]:
- ARCH_EMEV2 [=y] && SOC_RENESAS [=y] && ARM [=y]
Put the old dependency on ARCH_RENESAS back for the moment to restore
the previous behavior.
Fixes: 062887bf5e ("ARM: shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
+ misc cleanups across several platforms
-----BEGIN PGP SIGNATURE-----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=yEX2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64
C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
and misc cleanups across several platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: at91: add support in soc driver for new SAM9X60
ARM: at91: add support in soc driver for LPDDR2 SiP
memory: omap-gpmc: Use of_node_name_eq for node name comparisons
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
ARM: OMAP2+: Check also the first dts child for hwmod flags
soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
dmaengine: pxa: make the filter function internal
...
To control power to a power domain, the System Controller (SYSC) needs
the corresponding interrupt source to be enabled, but masked, to prevent
the CPU from receiving it.
Currently this is handled in the driver's probe() routine, and set up
for every domain present, even if it will not be controlled directly by
SYSC (CPU domains are powered through the APMU on R-Car Gen2 and later).
On R-Car Gen3, PSCI powers down the SoC during system suspend, thus
losing any configured interrupt state. Hence after system resume, power
domains not controlled through the APMU (e.g. A3IR, A3VC, A3VP) fail to
power up.
Fix this by replacing the global interrupt setup in the probe() routine
by a domain-specific interrupt setup in rcar_sysc_power(), where the
domain's power is actually controlled. This brings the code more in
line with the flowchart in the Hardware User's Manual.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit 977d5ba450 ("soc: renesas: rcar-sysc: Make PM domain
initialization more robust") split PM Domain registration and the
linking of children to their parents, to accommodate PM Domain tables
that list child domains before their parents.
However, this failed to realize that parent power domains must be
powered up before their children anyway, and that this thus must be
reflected by the order in the PM Domain tables.
Revert the split, as it did not help anyway.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Until commit 7e8a50df26 ("soc: renesas: rcar-sysc: Drop legacy
handling"), the rcar_sysc_power_{down,up}() helpers were public, as they
were called by the legacy (pre-DT) CPU power management code on R-Car H1
and R-Car Gen2 before.
As they are just one-line wrappers around rcar_sysc_power(), it makes
sense to just remove them.
This also avoids a bool/helper/bool conversion in rcar_sysc_power_cpu(),
where a bool is checked to call one of two helper functions, which
just call rcar_sysc_power() with hardcoded boolean values again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The workaround for the wrong hierarchy of the 3DG-{A,B} power
domains on R-Car E3 ES1.0 corrected the parent domains.
However, the 3DG-{A,B} power domains were still initialized and powered
in the wrong order, causing 3DG operation to fail.
Fix this by changing the order in the table at runtime, when running on
an affected SoC.
Fixes: 086b399965 ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The pm-rmobile driver is really a driver for the System Controller
(SYSC) found in R-Mobile SoCs. An equivalent driver for R-Car SoCs is
already located under drivers/soc/renesas/.
Hence move the pm-rmobile driver from arch/arm/mach-shmobile/ to
drivers/soc/renesas/, and rename it to rmobile-sysc.
Enable compile-testing on non-ARM and non-R-Mobile SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
renamed the A3VIP power domain on R-Car V3H to A3VIP0, and clarified the
power domain hierarchy for the A3VIP[012] power domains.
As the definition for the A3VIP0 domain is not yet used from DT, it can
just be renamed.
Fixes: 7755b40d07 ("dt-bindings: power: add R8A77980 SYSC power domain definitions")
Fixes: 41d6d8bd8a ("soc: renesas: rcar-sysc: add R8A77980 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
renamed the A2PD0 and A2DP0 power domains on R-Car V3H to A2DP0 resp.
A2DP1.
As these definitions are not yet used from DT, they can just be renamed.
Fixes: 7755b40d07 ("dt-bindings: power: add R8A77980 SYSC power domain definitions")
Fixes: 41d6d8bd8a ("soc: renesas: rcar-sysc: add R8A77980 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
renamed the A2IR2 and A2IR3 power domains on R-Car V3M to A2DP resp.
A2CN.
As these definitions are not yet used from DT, they can just be renamed.
While at it, fix the indentation of the A3IR definition.
Fixes: 833bdb47c8 ("dt-bindings: power: add R8A77970 SYSC power domain definitions")
Fixes: bab9b2a74f ("soc: renesas: rcar-sysc: add R8A77970 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
removed the CR7 power domain on R-Car V3M, as this SoC does not have an
ARM Cortex-R7 Realtime Core.
As this definition was never used from DT, it can just be removed.
Fixes: 833bdb47c8 ("dt-bindings: power: add R8A77970 SYSC power domain definitions")
Fixes: bab9b2a74f ("soc: renesas: rcar-sysc: add R8A77970 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
removed the A3IR power domain on R-Car M3-N, as this SoC does not have
an Image Processing Unit (IMP-X5).
The definition in the DT bindings header cannot be removed yet, until
its (incorrect) user has been removed.
Fixes: a527709b78 ("soc: renesas: rcar-sysc: Add R-Car M3-N support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
For consistency with arm64, where vendors have a single Kconfig symbol
in arch/arm64/Kconfig.platforms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arch/arm64/Kconfig.platforms has SoC-specific Kconfig symbols for
Renesas SoCs, while other vendors have only a single Kconfig symbol.
Increase consistency with other vendors by moving the SoC-specific
Kconfig symbols to drivers/soc/renesas/Kconfig.
Increase consistency with R-Car Gen1 and Gen2 SoCs on arm32 by
introducing a family-specific Kconfig symbol for R-Car Gen3
(ARCH_RCAR_GEN3), which enables family-specific hardware features.
While so far only a single family (R-Car Gen3 and derivatives) of
Renesas arm64 SoCs is supported by Linux, this will make it easier
to add support for other SoC families later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for RZ/G1N (R8A7744) SoC power areas to the R-Car SYSC driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for the RZ/G2E (R8A774C0) SoC power areas to the
R-Car SYSC driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for identifying the RZ/G2E (r8a774c0) SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for RZ/G2M (R8A774A1) SoC power areas to the R-Car SYSC
driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for identifying the RZ/A2M (R7S9210) SoC.
Also add support for reading the BSID register which is a different format
than the PRR.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds support for identifying the RZ/G2M (r8a774a1) SoC.
It corrects the original RZ/G SoC family name to RZ/G1 and also
adds support for the new RZ/G2 SoC family.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* Always enable ARCH_TIMER on SoCs with A7 or A15
All such SoCs have ARCH_TIMER so there is no need for it to be optional.
This allows clean-up which is included in this change.
* Do not compile r8a7779_platform_cpu_kill when it is unused
This avoids a warning by shuffling code into an existing #ifdef
r8a7779 is the R-Car H1 SoC
* Add SMP enabler driver for the RZ/N1D (r9a06g032) SoC
This is to allow SMP to be enabled via DT on the r9a06g032
* Stop compiling headsmp-apmu for non-SMP configs
This is a minor clean-up allowing removal of an #ifdef
-----BEGIN PGP SIGNATURE-----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=LXu6
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Second Round of Renesas ARM Based SoC Updates for v4.19
* Always enable ARCH_TIMER on SoCs with A7 or A15
All such SoCs have ARCH_TIMER so there is no need for it to be optional.
This allows clean-up which is included in this change.
* Do not compile r8a7779_platform_cpu_kill when it is unused
This avoids a warning by shuffling code into an existing #ifdef
r8a7779 is the R-Car H1 SoC
* Add SMP enabler driver for the RZ/N1D (r9a06g032) SoC
This is to allow SMP to be enabled via DT on the r9a06g032
* Stop compiling headsmp-apmu for non-SMP configs
This is a minor clean-up allowing removal of an #ifdef
* tag 'renesas-arm-soc2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
soc: r9a06g032: don't build SMP files for non-SMP config
ARM: shmobile: Add the R9A06G032 SMP enabler driver
ARM: shmobile: rcar-gen2: Stop compiling headsmp-apmu on !SMP
Signed-off-by: Olof Johansson <olof@lixom.net>
Without CONFIG_SMP, we get a build failure:
In file included from include/linux/byteorder/little_endian.h:5,
from arch/arm/include/uapi/asm/byteorder.h:22,
from include/asm-generic/bitops/le.h:6,
from arch/arm/include/asm/bitops.h:342,
from include/linux/bitops.h:18,
from include/linux/kernel.h:11,
from include/asm-generic/bug.h:18,
from arch/arm/include/asm/bug.h:60,
from include/linux/bug.h:5,
from include/linux/io.h:23,
from drivers/soc/renesas/r9a06g032-smp.c:11:
drivers/soc/renesas/r9a06g032-smp.c: In function 'r9a06g032_smp_boot_secondary':
drivers/soc/renesas/r9a06g032-smp.c:43:21: error: 'secondary_startup' undeclared (first use in this function)
writel(__pa_symbol(secondary_startup), cpu_bootaddr);
^~~~~~~~~~~~~~~~~
This makes the compilation of that file conditional on SMP support.
It would probably be better for consistency to leave that file
in arch/arm/mach-shmobile/, matching what we do for all other smp
operations.
Fixes: cde4f86f9249 ("arm: shmobile: Add the R9A06G032 SMP enabler driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Renesas R9A06G032 second CA7 is parked in a ROM pen at boot time, it
equires a special enable method to get it started.
Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* Convert to SPDX identifier
* Remove legacy SMP fallback code
Geert Uytterhoeven says "R-Car H2 and M2-W have been supporting SMP
enablement from DT using the "renesas,apmu" enable-method since v4.8.
A legacy fallback was left in place for backwards compatibility with old
DTBs.
This patch series removes the legacy SMP fallbacks for R-Car H2 and
M2-W, and consolidates their support in the common R-Car Gen2 machine
definition.2
* APMU cleanups after legacy SMP fallback removal
- Move cpu_leave_lowpower() from HOTPLUG_CPU || SUSPEND section to the
SUSPEND section as it is only used for suspend
- Remove shmobile_smp_apmu_prepare_cpus() as it is no longer used
- Remove platsmp-apmu.h
* Drop legacy SYSC fallbacks
Geert Uytterhoeven says "When DT SYSC support was introduced in v4.7,
legacy fallbacks were kept to keep secondary CPUs working on R-Car H1,
H2, and M2-W using old DTBs. However, the time has come to drop these
fallbacks, and clean up the resulting code"
-----BEGIN PGP SIGNATURE-----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=r3sD
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Arm SoC Updates for v4.19
* Convert to SPDX identifier
* Remove legacy SMP fallback code for R-CAR H2 and M2-W
- DT enablement has been in since 4.8, no longer needed
* APMU cleanups after legacy SMP fallback removal
* Drop legacy SYSC fallback code for R-Car H1, H2 and M2-W
- DT enablement has been in since 4.7, no longer needed.
* tag 'renesas-arm-soc-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: convert to SPDX identifier
soc: renesas: rcar-sysc: Drop legacy handling
ARM: shmobile: r8a7779: Remove explicit SYSC config and init
ARM: shmobile: r8a7779: Use rcar_sysc_power_{down,up}_cpu()
soc: renesas: rcar-sysc: Provide helpers to power up/down CPUs
ARM: shmobile: r8a7779: Stop powering down secondary CPUs during early boot
ARM: shmobile: rcar-gen2: Remove explicit SYSC config and init
ARM: shmobile: apmu: Remove platsmp-apmu.h
ARM: shmobile: apmu: Remove obsolete shmobile_smp_apmu_prepare_cpus()
ARM: shmobile: apmu: Move cpu_leave_lowpower() to SUSPEND section
ARM: shmobile: Remove unused shmobile_smp_init_fallback_ops()
ARM: shmobile: r8a7791: Use common R-Car Gen2 machine definition
ARM: shmobile: r8a7791: Remove legacy SMP fallback code
ARM: shmobile: r8a7790: Use common R-Car Gen2 machine definition
ARM: shmobile: r8a7790: Remove legacy SMP fallback code
Signed-off-by: Olof Johansson <olof@lixom.net>
Now the R-Car platform code no longer supports DTBs lacking a SYSC
device node in DT, all legacy handling can be dropped from the R-Car
SYSC driver:
- Make rcar_sysc_ch private to the driver,
- Make rcar_sysc_power_{down,up}() static (they have been replaced by
rcar_sysc_power_{down,up}_cpu()),
- Remove the legacy wrapper rcar_sysc_init(), and the check for double
initialization (only the early_initcall is left).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Provide helpers to control CPU power areas from platform code, taking
just a CPU index. This will avoid having to pass full CPU power area
parameter blocks, and thus duplicating information already provided by
SoC-specific SYSC drivers.
This will be used on R-Car H1 only.
Later R-Car generations rely on APMU/RST for CPU power area control.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The quirk for R-Car E3 ES1.0 added in commit 086b399965 ("soc:
renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") makes the 3DG-A
PM domain a subdomain of the 3DG-B PM domain. However, registering
3DG-A with its parent fails silently, as the 3DG-B PM domain hasn't been
registered yet, and such failures are never reported.
Fix this by:
1. Splitting PM Domain initialization in two steps, so all PM domains
are registered before any child-parent links are established,
2. Reporting any failures in establishing child-parent relations.
Check for and report pm_genpd_init() failures, too, as that function
gained a return value in commit 7eb231c337 ("PM / Domains: Convert
pm_genpd_init() to return an error code").
Fixes: 086b399965 ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds workaround for 3DG-{A,B} of R-Car E3 ES1.0 because
the SoC has a restriction about the order.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
