SCX_TASK_BAL_KEEP is used by balance_one() to tell pick_next_task_scx() to
keep running the current task. It's not really a task property. Replace it
with SCX_RQ_BAL_KEEP which resides in rq->scx.flags and is a better fit for
the usage. Also, the existing clearing rule is unnecessarily strict and
makes it difficult to use with core-sched. Just clear it on entry to
balance_one().
Signed-off-by: Tejun Heo <tj@kernel.org>
fd03c5b858 ("sched: Rework pick_next_task()") changed the definition of
pick_next_task() from:
pick_next_task() := pick_task() + set_next_task(.first = true)
to:
pick_next_task(prev) := pick_task() + put_prev_task() + set_next_task(.first = true)
making invoking put_prev_task() pick_next_task()'s responsibility. This
reordering allows pick_task() to be shared between regular and core-sched
paths and put_prev_task() to know the next task.
sched_ext depended on put_prev_task_scx() enqueueing the current task before
pick_next_task_scx() is called. While pulling sched/core changes,
70cc76aa0d80 ("Merge branch 'tip/sched/core' into for-6.12") added an
explicit put_prev_task_scx() call for SCX tasks in pick_next_task_scx()
before picking the first task as a workaround.
Clean it up and adopt the conventions that other sched classes are
following.
The operation of keeping running the current task was spread and required
the task to be put on the local DSQ before picking:
- balance_one() used SCX_TASK_BAL_KEEP to indicate that the task is still
runnable, hasn't exhausted its slice, and thus should keep running.
- put_prev_task_scx() enqueued the task to local DSQ if SCX_TASK_BAL_KEEP
is set. It also called do_enqueue_task() with SCX_ENQ_LAST if it is the
only runnable task. do_enqueue_task() in turn decided whether to use the
local DSQ depending on SCX_OPS_ENQ_LAST.
Consolidate the logic in balance_one() as it always knows whether it is
going to keep the current task. balance_one() now considers all conditions
where the current task should be kept and uses SCX_TASK_BAL_KEEP to tell
pick_next_task_scx() to keep the current task instead of picking one from
the local DSQ. Accordingly, SCX_ENQ_LAST handling is removed from
put_prev_task_scx() and do_enqueue_task() and pick_next_task_scx() is
updated to pick the current task if SCX_TASK_BAL_KEEP is set.
The workaround put_prev_task[_scx]() calls are replaced with
put_prev_set_next_task().
This causes two behavior changes observable from the BPF scheduler:
- When a task keep running, it no longer goes through enqueue/dequeue cycle
and thus ops.stopping/running() transitions. The new behavior is better
and all the existing schedulers should be able to handle the new behavior.
- The BPF scheduler cannot keep executing the current task by enqueueing
SCX_ENQ_LAST task to the local DSQ. If SCX_OPS_ENQ_LAST is specified, the
BPF scheduler is responsible for resuming execution after each
SCX_ENQ_LAST. SCX_OPS_ENQ_LAST is mostly useful for cases where scheduling
decisions are not made on the local CPU - e.g. central or userspace-driven
schedulin - and the new behavior is more logical and shouldn't pose any
problems. SCX_OPS_ENQ_LAST demonstration from scx_qmap is dropped as it
doesn't fit that well anymore and the last task handling is moved to the
end of qmap_dispatch().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Problem statement:
Since commit fc137c0dda ("sched/numa: enhance vma scanning logic"), the
Numa vma scan overhead has been reduced a lot. Meanwhile, the reducing of
the vma scan might create less Numa page fault information. The
insufficient information makes it harder for the Numa balancer to make
decision. Later, commit b7a5b537c5 ("sched/numa: Complete scanning of
partial VMAs regardless of PID activity") and commit 84db47ca71
("sched/numa: Fix mm numa_scan_seq based unconditional scan") are found to
bring back part of the performance.
Recently when running SPECcpu omnetpp_r on a 320 CPUs/2 Sockets system, a
long duration of remote Numa node read was observed by PMU events: A few
cores having ~500MB/s remote memory access for ~20 seconds. It causes
high core-to-core variance and performance penalty. After the
investigation, it is found that many vmas are skipped due to the active
PID check. According to the trace events, in most cases,
vma_is_accessed() returns false because the history access info stored in
pids_active array has been cleared.
Proposal:
The main idea is to adjust vma_is_accessed() to let it return true easier.
Thus compare the diff between mm->numa_scan_seq and
vma->numab_state->prev_scan_seq. If the diff has exceeded the threshold,
scan the vma.
This patch especially helps the cases where there are small number of
threads, like the process-based SPECcpu. Without this patch, if the
SPECcpu process access the vma at the beginning, then sleeps for a long
time, the pid_active array will be cleared. A a result, if this process
is woken up again, it never has a chance to set prot_none anymore.
Because only the first 2 times of access is granted for vma scan:
(current->mm->numa_scan_seq) - vma->numab_state->start_scan_seq) < 2 to be
worse, no other threads within the task can help set the prot_none. This
causes information lost.
Raghavendra helped test current patch and got the positive result
on the AMD platform:
autonumabench NUMA01
base patched
Amean syst-NUMA01 194.05 ( 0.00%) 165.11 * 14.92%*
Amean elsp-NUMA01 324.86 ( 0.00%) 315.58 * 2.86%*
Duration User 380345.36 368252.04
Duration System 1358.89 1156.23
Duration Elapsed 2277.45 2213.25
autonumabench NUMA02
Amean syst-NUMA02 1.12 ( 0.00%) 1.09 * 2.93%*
Amean elsp-NUMA02 3.50 ( 0.00%) 3.56 * -1.84%*
Duration User 1513.23 1575.48
Duration System 8.33 8.13
Duration Elapsed 28.59 29.71
kernbench
Amean user-256 22935.42 ( 0.00%) 22535.19 * 1.75%*
Amean syst-256 7284.16 ( 0.00%) 7608.72 * -4.46%*
Amean elsp-256 159.01 ( 0.00%) 158.17 * 0.53%*
Duration User 68816.41 67615.74
Duration System 21873.94 22848.08
Duration Elapsed 506.66 504.55
Intel 256 CPUs/2 Sockets:
autonuma benchmark also shows improvements:
v6.10-rc5 v6.10-rc5
+patch
Amean syst-NUMA01 245.85 ( 0.00%) 230.84 * 6.11%*
Amean syst-NUMA01_THREADLOCAL 205.27 ( 0.00%) 191.86 * 6.53%*
Amean syst-NUMA02 18.57 ( 0.00%) 18.09 * 2.58%*
Amean syst-NUMA02_SMT 2.63 ( 0.00%) 2.54 * 3.47%*
Amean elsp-NUMA01 517.17 ( 0.00%) 526.34 * -1.77%*
Amean elsp-NUMA01_THREADLOCAL 99.92 ( 0.00%) 100.59 * -0.67%*
Amean elsp-NUMA02 15.81 ( 0.00%) 15.72 * 0.59%*
Amean elsp-NUMA02_SMT 13.23 ( 0.00%) 12.89 * 2.53%*
v6.10-rc5 v6.10-rc5
+patch
Duration User 1064010.16 1075416.23
Duration System 3307.64 3104.66
Duration Elapsed 4537.54 4604.73
The SPECcpu remote node access issue disappears with the patch applied.
Link: https://lkml.kernel.org/r/20240827112958.181388-1-yu.c.chen@intel.com
Fixes: fc137c0dda ("sched/numa: enhance vma scanning logic")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Reviewed-and-tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Resolve trivial context conflicts from dl_server clearing being moved
around.
- Add @next to put_prev_task_scx() and @prev to pick_next_task_scx() to
match sched/core.
- Merge sched_class->switch_class() addition from sched_ext with
tip/sched/core changes in __pick_next_task().
- Make pick_next_task_scx() call put_prev_task_scx() to emulate the previous
behavior where sched_class->put_prev_task() was called before
sched_class->pick_next_task().
While this makes sched_ext build and function, the behavior is not in line
with other sched classes. The follow-up patches will address the
discrepancies and remove sched_class->switch_class().
Signed-off-by: Tejun Heo <tj@kernel.org>
In order to tell the previous sched_class what the next task is, add
put_prev_task(.next).
Notable SCX will use this to:
1) determine the next task will leave the SCX sched class and push
the current task to another CPU if possible.
2) statistics on how often and which other classes preempt it
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.367421076@infradead.org
When a task is selected through a dl_server, it will have p->dl_server
set, such that it can account runtime to the dl_server, see
update_curr_task().
Currently p->dl_server is set in pick*task() whenever it goes through
the dl_server, clearing it is a bit of a mess though. The trivial
solution is clearing it on the final put (now that we have this
location).
However, this gives a problem when:
p = pick_task(rq);
if (p)
put_prev_set_next_task(rq, prev, next);
picks the same task but through a different path, notably when it goes
from picking through the dl_server to a direct pick or vice-versa. In
that case we cannot readily determine wether we should clear or
preserve p->dl_server.
An additional complication is pick_*task() setting p->dl_server for a
remote pick, it might still need to update runtime before it schedules
the core_pick.
Close all these holes and remove all the random clearing of
p->dl_server by:
- having pick_*task() manage rq->dl_server
- having the final put_prev_task() clear p->dl_server
- having the first set_next_task() set p->dl_server = rq->dl_server
- complicate the core_sched code to save/restore rq->dl_server where
appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.259853414@infradead.org
The current rule is that:
pick_next_task() := pick_task() + set_next_task(.first = true)
And many classes implement it directly as such. Change things around
to make pick_next_task() optional while also changing the definition to:
pick_next_task(prev) := pick_task() + put_prev_task() + set_next_task(.first = true)
The reason is that sched_ext would like to have a 'final' call that
knows the next task. By placing put_prev_task() right next to
set_next_task() (as it already is for sched_core) this becomes
trivial.
As a bonus, this is a nice cleanup on its own.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.051225657@infradead.org
Abide by the simple rule:
pick_next_task() := pick_task() + set_next_task(.first = true)
This allows us to trivially get rid of server_pick_next() and things
collapse nicely.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224015.837303391@infradead.org
The rule is that:
pick_next_task() := pick_task() + set_next_task(.first = true)
Turns out, there's still a few things in pick_next_task() that are
missing from that combination.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224015.724111109@infradead.org
Turns out the core_sched bits forgot to use the
set_next_task(.first=true) variant. Notably:
pick_next_task() := pick_task() + set_next_task(.first = true)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224015.614146342@infradead.org
__sched_setscheduler() goes through an enqueue/dequeue cycle like so:
flags := DEQUEUE_SAVE | DEQUEUE_MOVE | DEQUEUE_NOCLOCK;
prev_class->dequeue_task(rq, p, flags);
new_class->enqueue_task(rq, p, flags);
when prev_class := fair_sched_class, this is followed by:
dequeue_task(rq, p, DEQUEUE_NOCLOCK | DEQUEUE_SLEEP);
the idea being that since the task has switched classes, we need to drop
the sched_delayed logic and have that task be deactivated per its previous
dequeue_task(..., DEQUEUE_SLEEP).
Unfortunately, this leaves the task on_rq. This is missing the tail end of
dequeue_entities() that issues __block_task(), which __sched_setscheduler()
won't have done due to not using DEQUEUE_DELAYED - not that it should, as
it is pretty much a fair_sched_class specific thing.
Make switched_from_fair() properly deactivate sched_delayed tasks upon
class changes via __block_task(), as if a
dequeue_task(..., DEQUEUE_DELAYED)
had been issued.
Fixes: 2e0199df25 ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240829135353.1524260-1-vschneid@redhat.com
In dl_server_start(), when schedstats is enabled, the following
happens:
dl_server_start()
dl_se->dl_server = 1;
enqueue_dl_entity()
update_stats_enqueue_dl()
__schedstats_from_dl_se()
dl_task_of()
BUG_ON(dl_server(dl_se));
Since only tasks have schedstats and internal entries do not, avoid
trying to update stats in this case.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20240829031111.12142-1-shijie@os.amperecomputing.com
Given that stack_not_used() is not performance critical function
uninline it.
Link: https://lkml.kernel.org/r/20240730150158.832783-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240724203322.2765486-4-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If memory tiering mode is on and a folio is not in the top tier memory,
folio's cpupid field is repurposed to store page access time. Instead of
an open coded check, use a function to encapsulate the check.
Link: https://lkml.kernel.org/r/20240724130115.793641-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since 3cf78c5d01 ("sched_ext: Unpin and repin rq lock from
balance_scx()"), sched_ext's balance path terminates rq_pin in the outermost
function. This is simpler and in line with what other balance functions are
doing but it loses control over rq->clock_update_flags which makes
assert_clock_udpated() trigger if other CPUs pins the rq lock.
The only place this matters is touch_core_sched() which uses the timestamp
to order tasks from sibling rq's. Switch to sched_clock_cpu(). Later, it may
be better to use per-core dispatch sequence number.
v2: Use sched_clock_cpu() instead of ktime_get_ns() per David.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3cf78c5d01 ("sched_ext: Unpin and repin rq lock from balance_scx()")
Acked-by: David Vernet <void@manifault.com>
Cc: Peter Zijlstra <peterz@infradead.org>
When deciding whether a task can be migrated to a CPU,
dispatch_to_local_dsq() was open-coding p->cpus_allowed and scx_rq_online()
tests instead of using task_can_run_on_remote_rq(). This had two problems.
- It was missing is_migration_disabled() check and thus could try to migrate
a task which shouldn't leading to assertion and scheduling failures.
- It was testing p->cpus_ptr directly instead of using task_allowed_on_cpu()
and thus failed to consider ISA compatibility.
Update dispatch_to_local_dsq() to use task_can_run_on_remote_rq():
- Move scx_ops_error() triggering into task_can_run_on_remote_rq().
- When migration isn't allowed, fall back to the global DSQ instead of the
source DSQ by returning DTL_INVALID. This is both simpler and an overall
better behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
The timerslack_ns setting is used to specify how much the hardware
timers should be delayed, to potentially dispatch multiple timers in a
single interrupt. This is a performance optimization. Timers of
realtime tasks (having a realtime scheduling policy) should not be
delayed.
This logic was inconsitently applied to the hrtimers, leading to delays
of realtime tasks which used timed waits for events (e.g. condition
variables). Due to the downstream override of the slack for rt tasks,
the procfs reported incorrect (non-zero) timerslack_ns values.
This is changed by setting the timer_slack_ns task attribute to 0 for
all tasks with a rt policy. By that, downstream users do not need to
specially handle rt tasks (w.r.t. the slack), and the procfs entry
shows the correct value of "0". Setting non-zero slack values (either
via procfs or PR_SET_TIMERSLACK) on tasks with a rt policy is ignored,
as stated in "man 2 PR_SET_TIMERSLACK":
Timer slack is not applied to threads that are scheduled under a
real-time scheduling policy (see sched_setscheduler(2)).
The special handling of timerslack on rt tasks in downstream users
is removed as well.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240814121032.368444-2-felix.moessbauer@siemens.com
To receive 863ccdbb91 ("sched: Allow sched_class::dequeue_task() to fail")
which makes sched_class.dequeue_task() return bool instead of void. This
leads to compile breakage and will be fixed by a follow-up patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
When soft interrupt actions are called, they are passed a pointer to the
struct softirq action which contains the action's function pointer.
This pointer isn't useful, as the action callback already knows what
function it is. And since each callback handles a specific soft interrupt,
the callback also knows which soft interrupt number is running.
No soft interrupt action callback actually uses this parameter, so remove
it from the function pointer signature. This clarifies that soft interrupt
actions are global routines and makes it slightly cheaper to call them.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/all/20240815171549.3260003-1-csander@purestorage.com
In the absence of an explicit cgroup slice configureation, make mixed
slice length work with cgroups by propagating the min_slice up the
hierarchy.
This ensures the cgroup entity gets timely service to service its
entities that have this timing constraint set on them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105030.948188417@infradead.org
Allow applications to directly set a suggested request/slice length using
sched_attr::sched_runtime.
The implementation clamps the value to: 0.1[ms] <= slice <= 100[ms]
which is 1/10 the size of HZ=1000 and 10 times the size of HZ=100.
Applications should strive to use their periodic runtime at a high
confidence interval (95%+) as the target slice. Using a smaller slice
will introduce undue preemptions, while using a larger value will
increase latency.
For all the following examples assume a scheduling quantum of 8, and for
consistency all examples have W=4:
{A,B,C,D}(w=1,r=8):
ABCD...
+---+---+---+---
t=0, V=1.5 t=1, V=3.5
A |------< A |------<
B |------< B |------<
C |------< C |------<
D |------< D |------<
---+*------+-------+--- ---+--*----+-------+---
t=2, V=5.5 t=3, V=7.5
A |------< A |------<
B |------< B |------<
C |------< C |------<
D |------< D |------<
---+----*--+-------+--- ---+------*+-------+---
Note: 4 identical tasks in FIFO order
~~~
{A,B}(w=1,r=16) C(w=2,r=16)
AACCBBCC...
+---+---+---+---
t=0, V=1.25 t=2, V=5.25
A |--------------< A |--------------<
B |--------------< B |--------------<
C |------< C |------<
---+*------+-------+--- ---+----*--+-------+---
t=4, V=8.25 t=6, V=12.25
A |--------------< A |--------------<
B |--------------< B |--------------<
C |------< C |------<
---+-------*-------+--- ---+-------+---*---+---
Note: 1 heavy task -- because q=8, double r such that the deadline of the w=2
task doesn't go below q.
Note: observe the full schedule becomes: W*max(r_i/w_i) = 4*2q = 8q in length.
Note: the period of the heavy task is half the full period at:
W*(r_i/w_i) = 4*(2q/2) = 4q
~~~
{A,C,D}(w=1,r=16) B(w=1,r=8):
BAACCBDD...
+---+---+---+---
t=0, V=1.5 t=1, V=3.5
A |--------------< A |---------------<
B |------< B |------<
C |--------------< C |--------------<
D |--------------< D |--------------<
---+*------+-------+--- ---+--*----+-------+---
t=3, V=7.5 t=5, V=11.5
A |---------------< A |---------------<
B |------< B |------<
C |--------------< C |--------------<
D |--------------< D |--------------<
---+------*+-------+--- ---+-------+--*----+---
t=6, V=13.5
A |---------------<
B |------<
C |--------------<
D |--------------<
---+-------+----*--+---
Note: 1 short task -- again double r so that the deadline of the short task
won't be below q. Made B short because its not the leftmost task, but is
eligible with the 0,1,2,3 spread.
Note: like with the heavy task, the period of the short task observes:
W*(r_i/w_i) = 4*(1q/1) = 4q
~~~
A(w=1,r=16) B(w=1,r=8) C(w=2,r=16)
BCCAABCC...
+---+---+---+---
t=0, V=1.25 t=1, V=3.25
A |--------------< A |--------------<
B |------< B |------<
C |------< C |------<
---+*------+-------+--- ---+--*----+-------+---
t=3, V=7.25 t=5, V=11.25
A |--------------< A |--------------<
B |------< B |------<
C |------< C |------<
---+------*+-------+--- ---+-------+--*----+---
t=6, V=13.25
A |--------------<
B |------<
C |------<
---+-------+----*--+---
Note: 1 heavy and 1 short task -- combine them all.
Note: both the short and heavy task end up with a period of 4q
~~~
A(w=1,r=16) B(w=2,r=16) C(w=1,r=8)
BBCAABBC...
+---+---+---+---
t=0, V=1 t=2, V=5
A |--------------< A |--------------<
B |------< B |------<
C |------< C |------<
---+*------+-------+--- ---+----*--+-------+---
t=3, V=7 t=5, V=11
A |--------------< A |--------------<
B |------< B |------<
C |------< C |------<
---+------*+-------+--- ---+-------+--*----+---
t=7, V=15
A |--------------<
B |------<
C |------<
---+-------+------*+---
Note: as before but permuted
~~~
From all this it can be deduced that, for the steady state:
- the total period (P) of a schedule is: W*max(r_i/w_i)
- the average period of a task is: W*(r_i/w_i)
- each task obtains the fair share: w_i/W of each full period P
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105030.842834421@infradead.org
Part of the reason to have shorter slices is to improve
responsiveness. Allow shorter slices to preempt longer slices on
wakeup.
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Sum delay ms |
100ms massive_intr 500us cyclictest NO_PREEMPT_SHORT
1 massive_intr:(5) | 846018.956 ms | 779188 | avg: 0.273 ms | max: 58.337 ms | sum:212545.245 ms |
2 massive_intr:(5) | 853450.693 ms | 792269 | avg: 0.275 ms | max: 71.193 ms | sum:218263.588 ms |
3 massive_intr:(5) | 843888.920 ms | 771456 | avg: 0.277 ms | max: 92.405 ms | sum:213353.221 ms |
1 chromium-browse:(8) | 53015.889 ms | 131766 | avg: 0.463 ms | max: 36.341 ms | sum:60959.230 ms |
2 chromium-browse:(8) | 53864.088 ms | 136962 | avg: 0.480 ms | max: 27.091 ms | sum:65687.681 ms |
3 chromium-browse:(9) | 53637.904 ms | 132637 | avg: 0.481 ms | max: 24.756 ms | sum:63781.673 ms |
1 cyclictest:(5) | 12615.604 ms | 639689 | avg: 0.471 ms | max: 32.272 ms | sum:301351.094 ms |
2 cyclictest:(5) | 12511.583 ms | 642578 | avg: 0.448 ms | max: 44.243 ms | sum:287632.830 ms |
3 cyclictest:(5) | 12545.867 ms | 635953 | avg: 0.475 ms | max: 25.530 ms | sum:302374.658 ms |
100ms massive_intr 500us cyclictest PREEMPT_SHORT
1 massive_intr:(5) | 839843.919 ms | 837384 | avg: 0.264 ms | max: 74.366 ms | sum:221476.885 ms |
2 massive_intr:(5) | 852449.913 ms | 845086 | avg: 0.252 ms | max: 68.162 ms | sum:212595.968 ms |
3 massive_intr:(5) | 839180.725 ms | 836883 | avg: 0.266 ms | max: 69.742 ms | sum:222812.038 ms |
1 chromium-browse:(11) | 54591.481 ms | 138388 | avg: 0.458 ms | max: 35.427 ms | sum:63401.508 ms |
2 chromium-browse:(8) | 52034.541 ms | 132276 | avg: 0.436 ms | max: 31.826 ms | sum:57732.958 ms |
3 chromium-browse:(8) | 55231.771 ms | 141892 | avg: 0.469 ms | max: 27.607 ms | sum:66538.697 ms |
1 cyclictest:(5) | 13156.391 ms | 667412 | avg: 0.373 ms | max: 38.247 ms | sum:249174.502 ms |
2 cyclictest:(5) | 12688.939 ms | 665144 | avg: 0.374 ms | max: 33.548 ms | sum:248509.392 ms |
3 cyclictest:(5) | 13475.623 ms | 669110 | avg: 0.370 ms | max: 37.819 ms | sum:247673.390 ms |
As per the numbers the, this makes cyclictest (short slice) it's
max-delay more consistent and consistency drops the sum-delay. The
trade-off is that the massive_intr (long slice) gets more context
switches and a slight increase in sum-delay.
Chunxin contributed did_preempt_short() where a task that lost slice
protection from PREEMPT_SHORT gets rescheduled once it becomes
in-eligible.
[mike: numbers]
Co-Developed-by: Chunxin Zang <zangchunxin@lixiang.com>
Signed-off-by: Chunxin Zang <zangchunxin@lixiang.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Link: https://lkml.kernel.org/r/20240727105030.735459544@infradead.org
During OSPM24 Youssef noted that migrations are re-setting the virtual
deadline. Notably everything that does a dequeue-enqueue, like setting
nice, changing preferred numa-node, and a myriad of other random crap,
will cause this to happen.
This shouldn't be. Preserve the relative virtual deadline across such
dequeue/enqueue cycles.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105030.625119246@infradead.org
Note that tasks that are kept on the runqueue to burn off negative
lag, are not in fact runnable anymore, they'll get dequeued the moment
they get picked.
As such, don't count this time towards runnable.
Thanks to Valentin for spotting I had this backwards initially.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105030.514088302@infradead.org
'Extend' DELAY_DEQUEUE by noting that since we wanted to dequeued them
at the 0-lag point, truncate lag (eg. don't let them earn positive
lag).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105030.403750550@infradead.org
Extend / fix 86bfbb7ce4 ("sched/fair: Add lag based placement") by
noting that lag is fundamentally a temporal measure. It should not be
carried around indefinitely.
OTOH it should also not be instantly discarded, doing so will allow a
task to game the system by purposefully (micro) sleeping at the end of
its time quantum.
Since lag is intimately tied to the virtual time base, a wall-time
based decay is also insufficient, notably competition is required for
any of this to make sense.
Instead, delay the dequeue and keep the 'tasks' on the runqueue,
competing until they are eligible.
Strictly speaking, we only care about keeping them until the 0-lag
point, but that is a difficult proposition, instead carry them around
until they get picked again, and dequeue them at that point.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105030.226163742@infradead.org
Since special task states must not suffer spurious wakeups, and the
proposed delayed dequeue can cause exactly these (under some boundary
conditions), propagate this knowledge into dequeue_task() such that it
can do the right thing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105030.110439521@infradead.org
Doing a wakeup on a delayed dequeue task is about as simple as it
sounds -- remove the delayed mark and enjoy the fact it was actually
still on the runqueue.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105029.888107381@infradead.org
Delayed dequeue's natural end is when it gets picked again. Ensure
pick_next_task() knows what to do with delayed tasks.
Note, this relies on the earlier patch that made pick_next_task()
state invariant -- it will restart the pick on dequeue, because
obviously the just dequeued task is no longer eligible.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105029.747330118@infradead.org
When dequeue_task() is delayed it becomes possible to exit a task (or
cgroup) that is still enqueued. Ensure things are dequeued before
freeing.
Thanks to Valentin for asking the obvious questions and making
switched_from_fair() less weird.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105029.631948434@infradead.org
Just a little sanity test..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105029.486423066@infradead.org
Delayed dequeue has tasks sit around on the runqueue that are not
actually runnable -- specifically, they will be dequeued the moment
they get picked.
One side-effect is that such a task can get migrated, which leads to a
'nested' dequeue_task() scenario that messes up uclamp if we don't
take care.
Notably, dequeue_task(DEQUEUE_SLEEP) can 'fail' and keep the task on
the runqueue. This however will have removed the task from uclamp --
per uclamp_rq_dec() in dequeue_task(). So far so good.
However, if at that point the task gets migrated -- or nice adjusted
or any of a myriad of operations that does a dequeue-enqueue cycle --
we'll pass through dequeue_task()/enqueue_task() again. Without
modification this will lead to a double decrement for uclamp, which is
wrong.
Reported-by: Luis Machado <luis.machado@arm.com>
Reported-by: Hongyan Xia <hongyan.xia2@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105029.315205425@infradead.org
While most of the delayed dequeue code can be done inside the
sched_class itself, there is one location where we do not have an
appropriate hook, namely ttwu_runnable().
Add an ENQUEUE_DELAYED call to the on_rq path to deal with waking
delayed dequeue tasks.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105029.200000445@infradead.org
As a preparation for dequeue_task() failing, and a second code-path
needing to take care of the 'success' path, split out the DEQEUE_SLEEP
path from deactivate_task().
Much thanks to Libo for spotting and fixing a TASK_ON_RQ_MIGRATING
ordering fail.
Fixed-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105029.086192709@infradead.org
Working towards delaying dequeue, notably also inside the hierachy,
rework dequeue_task_fair() such that it can 'resume' an interrupted
hierarchy walk.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105028.977256873@infradead.org
Change the function signature of sched_class::dequeue_task() to return
a boolean, allowing future patches to 'fail' dequeue.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105028.864630153@infradead.org
Implement pick_next_task_fair() in terms of pick_task_fair() to
de-duplicate the pick loop.
More importantly, this makes all the pick loops use the
state-invariant form, which is useful to introduce further re-try
conditions in later patches.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105028.725062368@infradead.org
With 4c456c9ad3 ("sched/fair: Remove unused 'curr' argument from
pick_next_entity()") curr is no longer being used, so no point in
clearing it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105028.614707623@infradead.org
Per 54d27365ca ("sched/fair: Prevent throttling in early
pick_next_task_fair()") the reason check_cfs_rq_runtime() is under the
'if (curr)' check is to ensure the (downward) traversal does not
result in an empty cfs_rq.
But then the pick_task_fair() 'copy' of all this made it restart the
traversal anyway, so that seems to solve the issue too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105028.501679876@infradead.org
Since commit e8f331bcc2 ("sched/smp: Use lag to simplify
cross-runqueue placement") the min_vruntime_copy is no longer used.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lkml.kernel.org/r/20240727105028.395297941@infradead.org
The commit 2d7f00b2f0 ("rcu: Suppress smp_processor_id() complaint
in synchronize_rcu_expedited_wait()") disabled preemption around
dump_cpu_task() to suppress warning on its usage within preemtible context.
Calling dump_cpu_task() doesn't required to be in non-preemptible context
except for suppressing the smp_processor_id() warning.
As the smp_processor_id() is evaluated along with in_hardirq()
to check if it's in interrupt context, this patch removes the need
for its preemtion disablement by reordering the condition so that
smp_processor_id() only gets evaluated when it's in interrupt context.
Signed-off-by: Ryo Takakura <takakura@valinux.co.jp>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
consume_remote_task() and dispatch_to_local_dsq() use
move_task_to_local_dsq() to migrate the task to the target CPU. Currently,
move_task_to_local_dsq() expects the caller to lock both the source and
destination rq's. While this may save a few lock operations while the rq's
are not contended, under contention, the double locking can exacerbate the
situation significantly (refer to the linked message below).
Update the migration path so that double locking is not used.
move_task_to_local_dsq() now expects the caller to be locking the source rq,
drops it and then acquires the destination rq lock. Code is simpler this way
and, on a 2-way NUMA machine w/ Xeon Gold 6138, 'hackbench 100 thread 5000`
shows ~3% improvement with scx_simple.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20240806082716.GP37996@noisy.programming.kicks-ass.net
Acked-by: David Vernet <void@manifault.com>
`__bpf_ops_sched_ext_ops` was missing the initialization of some struct
attributes. With
https://lore.kernel.org/all/20240722183049.2254692-4-martin.lau@linux.dev/
every single attributes need to be initialized programs (like scx_layered)
will fail to load.
05:26:48 [INFO] libbpf: struct_ops layered: member cgroup_init not found in kernel, skipping it as it's set to zero
05:26:48 [INFO] libbpf: struct_ops layered: member cgroup_exit not found in kernel, skipping it as it's set to zero
05:26:48 [INFO] libbpf: struct_ops layered: member cgroup_prep_move not found in kernel, skipping it as it's set to zero
05:26:48 [INFO] libbpf: struct_ops layered: member cgroup_move not found in kernel, skipping it as it's set to zero
05:26:48 [INFO] libbpf: struct_ops layered: member cgroup_cancel_move not found in kernel, skipping it as it's set to zero
05:26:48 [INFO] libbpf: struct_ops layered: member cgroup_set_weight not found in kernel, skipping it as it's set to zero
05:26:48 [WARN] libbpf: prog 'layered_dump': BPF program load failed: unknown error (-524)
05:26:48 [WARN] libbpf: prog 'layered_dump': -- BEGIN PROG LOAD LOG --
attach to unsupported member dump of struct sched_ext_ops
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
05:26:48 [WARN] libbpf: prog 'layered_dump': failed to load: -524
05:26:48 [WARN] libbpf: failed to load object 'bpf_bpf'
05:26:48 [WARN] libbpf: failed to load BPF skeleton 'bpf_bpf': -524
Error: Failed to load BPF program
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
sched_ext currently doesn't generate messages when the BPF scheduler is
enabled and disabled unless there are errors. It is useful to have paper
trail. Improve logging around enable/disable:
- Generate info messages on enable and non-error disable.
- Update error exit message formatting so that it's consistent with
non-error message. Also, prefix ei->msg with the BPF scheduler's name to
make it clear where the message is coming from.
- Shorten scx_exit_reason() strings for SCX_EXIT_UNREG* for brevity and
consistency.
v2: Use pr_*() instead of KERN_* consistently. (David)
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: David Vernet <void@manifault.com>
scx_rq_online() currently only tests SCX_RQ_ONLINE. This isn't fully correct
- e.g. consume_dispatch_q() uses task_run_on_remote_rq() which tests
scx_rq_online() to see whether the current rq can run the task, and, if so,
calls consume_remote_task() to migrate the task to @rq. While the test
itself was done while locking @rq, @rq can be temporarily unlocked by
consume_remote_task() and nothing prevents SCX_RQ_ONLINE from going offline
before the migration takes place.
To address the issue, add cpu_active() test to scx_rq_online(). There is a
synchronize_rcu() between cpu_active() being cleared and the rq going
offline, so if an on-going scheduling operation sees cpu_active(), the
associated rq is guaranteed to not go offline until the scheduling operation
is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 60c27fb59f ("sched_ext: Implement sched_ext_ops.cpu_online/offline()")
Acked-by: David Vernet <void@manifault.com>
process_ddsp_deferred_locals() executes deferred direct dispatches to the
local DSQs of remote CPUs. It iterates the tasks on
rq->scx.ddsp_deferred_locals list, removing and calling
dispatch_to_local_dsq() on each. However, the list is protected by the rq
lock that can be dropped by dispatch_to_local_dsq() temporarily, so the list
can be modified during the iteration, which can lead to oopses and other
failures.
Fix it by popping from the head of the list instead of iterating the list.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5b26f7b920 ("sched_ext: Allow SCX_DSQ_LOCAL_ON for direct dispatches")
Acked-by: David Vernet <void@manifault.com>
Some find the name realtime overloaded. Use rt_or_dl() as an
alternative, hopefully better, name.
Suggested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240610192018.1567075-4-qyousef@layalina.io
rt_task() checks if a task has RT priority. But depends on your
dictionary, this could mean it belongs to RT class, or is a 'realtime'
task, which includes RT and DL classes.
Since this has caused some confusion already on discussion [1], it
seemed a clean up is due.
I define the usage of rt_task() to be tasks that belong to RT class.
Make sure that it returns true only for RT class and audit the users and
replace the ones required the old behavior with the new realtime_task()
which returns true for RT and DL classes. Introduce similar
realtime_prio() to create similar distinction to rt_prio() and update
the users that required the old behavior to use the new function.
Move MAX_DL_PRIO to prio.h so it can be used in the new definitions.
Document the functions to make it more obvious what is the difference
between them. PI-boosted tasks is a factor that must be taken into
account when choosing which function to use.
Rename task_is_realtime() to realtime_task_policy() as the old name is
confusing against the new realtime_task().
No functional changes were intended.
[1] https://lore.kernel.org/lkml/20240506100509.GL40213@noisy.programming.kicks-ass.net/
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240610192018.1567075-2-qyousef@layalina.io
This code has an integer overflow or sign extension bug which was caught
by gcc-13:
kernel/sched/debug.c:341:57: error: integer overflow in expression of
type 'long int' results in '-100663296' [-Werror=overflow]
341 | static unsigned long fair_server_period_max = (1 << 22) * NSEC_PER_USEC; /* ~4 seconds */
The result is that "fair_server_period_max" is set to 0xfffffffffa000000
(585 years) instead of instead of 0xfa000000 (4 seconds) that was
intended.
Fix this by changing the type to shift from (1 << 22) to (1UL << 22).
Closes: https://lore.kernel.org/all/CA+G9fYtE2GAbeqU+AOCffgo2oH0RTJUxU+=Pi3cFn4di_KgBAQ@mail.gmail.com/
Fixes: d741f297bc ("sched/fair: Fair server interface")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/a936b991-e464-4bdf-94ab-08e25d364986@stanley.mountain
balance_fair() skips newidle balancing if rq->nr_running - there are already
tasks on the rq, so no need to try to pull tasks. This tests the total
number of queued tasks on the CPU instead of only the fair class, but is
still correct as the rq can currently only have fair class tasks while
balance_fair() is running.
However, with the addition of sched_ext below the fair class, this will not
hold anymore and make put_prev_task_balance() skip sched_ext's balance()
incorrectly as, when a CPU has only lower priority class tasks,
rq->nr_running would still be positive and balance_fair() would return 1
even when fair doesn't have any tasks to run.
Update balance_fair() to use sched_fair_runnable() which tests
rq->cfs.nr_running which is updated by bandwidth throttling. Note that
pick_next_task_fair() already uses sched_fair_runnable() in its optimized
path for the same purpose.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/ZrFUjlCf7x3TNXB8@slm.duckdns.org
task_can_run_on_remote_rq() is similar to is_cpu_allowed() but there are
subtle differences. It currently open codes all the tests. This is
cumbersome to understand and error-prone in case the intersecting tests need
to be updated.
Factor out the common part - testing whether the task is allowed on the CPU
at all regardless of the CPU state - into task_allowed_on_cpu() and make
both is_cpu_allowed() and SCX's task_can_run_on_remote_rq() use it. As the
code is now linked between the two and each contains only the extra tests
that differ between them, it's less error-prone when the conditions need to
be updated. Also, improve the comment to explain why they are different.
v2: Replace accidental "extern inline" with "static inline" (Peter).
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
scx_task_iter_next_locked() skips tasks whose sched_class is
idle_sched_class. While it has a short comment explaining why it's testing
the sched_class directly isntead of using is_idle_task(), the comment
doesn't sufficiently explain what's going on and why. Improve the comment.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
On SMP, SCX performs dispatch from sched_class->balance(). As balance() was
not available in UP, it instead called the internal balance function from
put_prev_task_scx() and pick_next_task_scx() to emulate the effect, which is
rather nasty.
Enabling sched_class->balance() on UP shouldn't cause any meaningful
overhead. Enable balance() on UP and drop the ugly workaround.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
update_curr_scx() is open coding runtime updates. Use update_curr_common()
instead and avoid unnecessary deviations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
SCX needs its balance() invoked even when waking up from a lower priority
sched class (idle) and put_prev_task_balance() thus has the logic to promote
@start_class if it's lower than ext_sched_class. This is only needed when
SCX is enabled. Add scx_enabled() test to avoid unnecessary overhead when
SCX is disabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
The way sched_can_stop_tick() used scx_can_stop_tick() was rather confusing
and the behavior wasn't ideal when SCX is enabled in partial mode. Simplify
it so that:
- scx_can_stop_tick() can say no if scx_enabled().
- CFS tests rq->cfs.nr_running > 1 instead of rq->nr_running.
This is easier to follow and leads to the correct answer whether SCX is
disabled, enabled in partial mode or all tasks are switched to SCX.
Peter, note that this is a bit different from your suggestion where
sched_can_stop_tick() unconditionally returns scx_can_stop_tick() iff
scx_switched_all(). The problem is that in partial mode, tick can be stopped
when there is only one SCX task even if the BPF scheduler didn't ask and
isn't ready for it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
The kernel sleep profile is no longer working due to a recursive locking
bug introduced by commit 42a20f86dc ("sched: Add wrapper for get_wchan()
to keep task blocked")
Booting with the 'profile=sleep' kernel command line option added or
executing
# echo -n sleep > /sys/kernel/profiling
after boot causes the system to lock up.
Lockdep reports
kthreadd/3 is trying to acquire lock:
ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: get_wchan+0x32/0x70
but task is already holding lock:
ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: try_to_wake_up+0x53/0x370
with the call trace being
lock_acquire+0xc8/0x2f0
get_wchan+0x32/0x70
__update_stats_enqueue_sleeper+0x151/0x430
enqueue_entity+0x4b0/0x520
enqueue_task_fair+0x92/0x6b0
ttwu_do_activate+0x73/0x140
try_to_wake_up+0x213/0x370
swake_up_locked+0x20/0x50
complete+0x2f/0x40
kthread+0xfb/0x180
However, since nobody noticed this regression for more than two years,
let's remove 'profile=sleep' support based on the assumption that nobody
needs this functionality.
Fixes: 42a20f86dc ("sched: Add wrapper for get_wchan() to keep task blocked")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull tip/sched/core to resolve the following four conflicts. While 2-4 are
simple context conflicts, 1 is a bit subtle and easy to resolve incorrectly.
1. 2c8d046d5d ("sched: Add normal_policy()")
vs.
faa42d2941 ("sched/fair: Make SCHED_IDLE entity be preempted in strict hierarchy")
The former converts direct test on p->policy to use the helper
normal_policy(). The latter moves the p->policy test to a different
location. Resolve by converting the test on p->plicy in the new location to
use normal_policy().
2. a7a9fc5492 ("sched_ext: Add boilerplate for extensible scheduler class")
vs.
a110a81c52 ("sched/deadline: Deferrable dl server")
Both add calls to put_prev_task_idle() and set_next_task_idle(). Simple
context conflict. Resolve by taking changes from both.
3. a7a9fc5492 ("sched_ext: Add boilerplate for extensible scheduler class")
vs.
c245910049 ("sched/core: Add clearing of ->dl_server in put_prev_task_balance()")
The former changes for_each_class() itertion to use for_each_active_class().
The latter moves away the adjacent dl_server handling code. Simple context
conflict. Resolve by taking changes from both.
4. 60c27fb59f ("sched_ext: Implement sched_ext_ops.cpu_online/offline()")
vs.
31b164e2e4 ("sched/smt: Introduce sched_smt_present_inc/dec() helper")
2f02735412 ("sched/core: Introduce sched_set_rq_on/offline() helper")
The former adds scx_rq_deactivate() call. The latter two change code around
it. Simple context conflict. Resolve by taking changes from both.
Signed-off-by: Tejun Heo <tj@kernel.org>
From 1232da7eced620537a78f19c8cf3d4a3508e2419 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 31 Jul 2024 09:14:52 -1000
p->scx.disallow provides a way for the BPF scheduler to reject certain tasks
from attaching. It's currently allowed for both the load and fork paths;
however, the latter doesn't actually work as p->sched_class is already set
by the time scx_ops_init_task() is called during fork.
This is a convenience feature which is mostly useful from the load path
anyway. Allow it only from the load path.
v2: Trigger scx_ops_error() iff @p->policy == SCHED_EXT to make it a bit
easier for the BPF scheduler (David).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Zhangqiao (2012 lab)" <zhangqiao22@huawei.com>
Link: http://lkml.kernel.org/r/20240711110720.1285-1-zhangqiao22@huawei.com
Fixes: 7bb6f0810e ("sched_ext: Allow BPF schedulers to disallow specific tasks from joining SCHED_EXT")
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_dump_task() uses stack_trace_save_tsk() which is only available when
CONFIG_STACKTRACE. Make CONFIG_SCHED_CLASS_EXT select CONFIG_STACKTRACE if
the support is available and skip capturing stack trace if
!CONFIG_STACKTRACE.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407161844.reewQQrR-lkp@intel.com/
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We currently only allow calling sleepable scx kfuncs (i.e.
scx_bpf_create_dsq()) from BPF_PROG_TYPE_STRUCT_OPS progs. The idea here
was that we'd never have to call scx_bpf_create_dsq() outside of a
sched_ext struct_ops callback, but that might not actually be true. For
example, a scheduler could do something like the following:
1. Open and load (not yet attach) a scheduler skel
2. Synchronously call into a BPF_PROG_TYPE_SYSCALL prog from user space.
For example, to initialize an LLC domain, or some other global,
read-only state.
3. Attach the skel, which actually enables the scheduler
The advantage of doing this is that it can preclude having to do pretty
ugly boilerplate like initializing a read-only, statically sized array of
u64[]'s which the kernel consumes literally once at init time to then
create struct bpf_cpumask objects which are actually queried at runtime.
Doing the above is already possible given that we can invoke core BPF
kfuncs, such as bpf_cpumask_create(), from BPF_PROG_TYPE_SYSCALL progs. We
already allow many scx kfuncs to be called from BPF_PROG_TYPE_SYSCALL progs
(e.g. scx_bpf_kick_cpu()). Let's allow the sleepable kfuncs as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The throttle interaction made my brain hurt, make it consistently
about 0 transitions of h_nr_running.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Now that fair_server exists, we no longer need RT bandwidth control
unless RT_GROUP_SCHED.
Enable fair_server with parameters equivalent to RT throttling.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/14d562db55df5c3c780d91940743acb166895ef7.1716811044.git.bristot@kernel.org
* Use simple CFS pick_task for DL pick_task
DL server's pick_task calls CFS's pick_next_task_fair(), this is wrong
because core scheduling's pick_task only calls CFS's pick_task() for
evaluation / checking of the CFS task (comparing across CPUs), not for
actually affirmatively picking the next task. This causes RB tree
corruption issues in CFS that were found by syzbot.
* Make pick_task_fair clear DL server
A DL task pick might set ->dl_server, but it is possible the task will
never run (say the other HT has a stop task). If the CFS task is picked
in the future directly (say without DL server), ->dl_server will be
set. So clear it in pick_task_fair().
This fixes the KASAN issue reported by syzbot in set_next_entity().
(DL refactoring suggestions by Vineeth Pillai).
Reported-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vineeth Pillai <vineeth@bitbyteword.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/b10489ab1f03d23e08e6097acea47442e7d6466f.1716811044.git.bristot@kernel.org
In core scheduling, a DL server pick (which is CFS task) should be
given higher priority than tasks in other classes.
Not doing so causes CFS starvation. A kselftest is added later to
demonstrate this. A CFS task that is competing with RT tasks can
be completely starved without this and the DL server's boosting
completely ignored.
Fix these problems.
Reported-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vineeth Pillai <vineeth@bitbyteword.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/48b78521d86f3b33c24994d843c1aad6b987dda9.1716811044.git.bristot@kernel.org
Add an interface for fair server setup on debugfs.
Each CPU has two files under /debug/sched/fair_server/cpu{ID}:
- runtime: set runtime in ns
- period: set period in ns
This then leaves /proc/sys/kernel/sched_rt_{period,runtime}_us to set
bounds on admission control.
The interface also add the server to the dl bandwidth accounting.
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/a9ef9fc69bcedb44bddc9bc34f2b313296052819.1716811044.git.bristot@kernel.org
Among the motivations for the DL servers is the real-time throttling
mechanism. This mechanism works by throttling the rt_rq after
running for a long period without leaving space for fair tasks.
The base dl server avoids this problem by boosting fair tasks instead
of throttling the rt_rq. The point is that it boosts without waiting
for potential starvation, causing some non-intuitive cases.
For example, an IRQ dispatches two tasks on an idle system, a fair
and an RT. The DL server will be activated, running the fair task
before the RT one. This problem can be avoided by deferring the
dl server activation.
By setting the defer option, the dl_server will dispatch an
SCHED_DEADLINE reservation with replenished runtime, but throttled.
The dl_timer will be set for the defer time at (period - runtime) ns
from start time. Thus boosting the fair rq at defer time.
If the fair scheduler has the opportunity to run while waiting
for defer time, the dl server runtime will be consumed. If
the runtime is completely consumed before the defer time, the
server will be replenished while still in a throttled state. Then,
the dl_timer will be reset to the new defer time
If the fair server reaches the defer time without consuming
its runtime, the server will start running, following CBS rules
(thus without breaking SCHED_DEADLINE). Then the server will
continue the running state (without deferring) until it fair
tasks are able to execute as regular fair scheduler (end of
the starvation).
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/dd175943c72533cd9f0b87767c6499204879cc38.1716811044.git.bristot@kernel.org
Use deadline servers to service fair tasks.
This patch adds a fair_server deadline entity which acts as a container
for fair entities and can be used to fix starvation when higher priority
(wrt fair) tasks are monopolizing CPU(s).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/b6b0bcefaf25391bcf5b6ecdb9f1218de402d42e.1716811044.git.bristot@kernel.org
In case the previous pick was a DL server pick, ->dl_server might be
set. Clear it in the fast path as well.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Youssef Esmat <youssefesmat@google.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/7f7381ccba09efcb4a1c1ff808ed58385eccc222.1716811044.git.bristot@kernel.org
Paths using put_prev_task_balance() need to do a pick shortly
after. Make sure they also clear the ->dl_server on prev as a
part of that.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d184d554434bedbad0581cb34656582d78655150.1716811044.git.bristot@kernel.org
Consider the following cgroup:
root
|
------------------------
| |
normal_cgroup idle_cgroup
| |
SCHED_IDLE task_A SCHED_NORMAL task_B
According to the cgroup hierarchy, A should preempt B. But current
check_preempt_wakeup_fair() treats cgroup se and task separately, so B
will preempt A unexpectedly.
Unify the wakeup logic by {c,p}se_is_idle only. This makes SCHED_IDLE of
a task a relative policy that is effective only within its own cgroup,
similar to the behavior of NICE.
Also fix se_is_idle() definition when !CONFIG_FAIR_GROUP_SCHED.
Fixes: 304000390f ("sched: Cgroup SCHED_IDLE support")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20240626023505.1332596-1-dtcccc@linux.alibaba.com
As a hedge against unexpected user issues commit 88c56cfeae
("sched/fair: Block nohz tick_stop when cfs bandwidth in use")
included a scheduler feature to disable the new functionality.
It's been a few releases (v6.6) and no screams, so remove it.
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20240515133705.3632915-1-pauld@redhat.com
nr_spread_over tracks the number of instances where the difference
between a scheduling entity's virtual runtime and the minimum virtual
runtime in the runqueue exceeds three times the scheduler latency,
indicating significant disparity in task scheduling.
Commit that removed its usage: 5e963f2bd: sched/fair: Commit to EEVDF
cfs_rq->exec_clock was used to account for time spent executing tasks.
Commit that removed its usage: 5d69eca542 sched: Unify runtime
accounting across classes
cfs_rq::nr_spread_over and cfs_rq::exec_clock are not used anymore in
eevdf. Remove them from struct cfs_rq.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Vishal Chourasia <vishalc@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717143342.593262-1-zhouchuyi@bytedance.com
Background
==========
When repeated migrate_disable() calls are made with missing the
corresponding migrate_enable() calls, there is a risk of
'migration_disabled' going upper overflow because
'migration_disabled' is a type of unsigned short whose max value is
65535.
In PREEMPT_RT kernel, if 'migration_disabled' goes upper overflow, it may
make the migrate_disable() ineffective within local_lock_irqsave(). This
is because, during the scheduling procedure, the value of
'migration_disabled' will be checked, which can trigger CPU migration.
Consequently, the count of 'rcu_read_lock_nesting' may leak due to
local_lock_irqsave() and local_unlock_irqrestore() occurring on different
CPUs.
Usecase
========
For example, When I developed a driver, I encountered a warning like
"WARNING: CPU: 4 PID: 260 at kernel/rcu/tree_plugin.h:315
rcu_note_context_switch+0xa8/0x4e8" warning. It took me half a month
to locate this issue. Ultimately, I discovered that the lack of upper
overflow detection mechanism in migrate_disable() was the root cause,
leading to a significant amount of time spent on problem localization.
If the upper overflow detection mechanism was added to migrate_disable(),
the root cause could be very quickly and easily identified.
Effect
======
Using WARN_ON_ONCE() to check if 'migration_disabled' is upper overflow
can help developers identify the issue quickly.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peilin He<he.peilin@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Reviewed-by: Qiang Tu <tu.qiang35@zte.com.cn>
Reviewed-by: Kun Jiang <jiang.kun2@zte.com.cn>
Reviewed-by: Fan Yu <fan.yu9@zte.com.cn>
Link: https://lkml.kernel.org/r/20240716104244764N2jD8gnBpnsLjCDnQGQ8c@zte.com.cn
When creating a new task, we initialize vruntime of the newly task at
sched_cgroup_fork(). However, the timing of executing this action is too
early and may not be accurate.
Because it uses current CPU to init the vruntime, but the new task
actually runs on the cpu which be assigned at wake_up_new_task().
To optimize this case, we pass ENQUEUE_INITIAL flag to activate_task()
in wake_up_new_task(), in this way, when place_entity is called in
enqueue_entity(), the vruntime of the new task will be initialized.
In addition, place_entity() in task_fork_fair() was introduced for two
reasons:
1. Previously, the __enqueue_entity() was in task_new_fair(),
in order to provide vruntime for enqueueing the newly task, the
vruntime assignment equation "se->vruntime = cfs_rq->min_vruntime" was
introduced by commit e9acbff648 ("sched: introduce se->vruntime").
This is the initial state of place_entity().
2. commit 4d78e7b656 ("sched: new task placement for vruntime") added
child_runs_first task placement feature which based on vruntime, this
also requires the new task's vruntime value.
After removing the child_runs_first and enqueue_entity() from
task_fork_fair(), this place_entity() no longer makes sense, so remove
it also.
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240627133359.1370598-1-zhangqiao22@huawei.com
I got the following warn report while doing stress test:
jump label: negative count!
WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked+0x16/0x70
sched_cpu_deactivate+0x26e/0x2a0
cpuhp_invoke_callback+0x3ad/0x10d0
cpuhp_thread_fun+0x3f5/0x680
smpboot_thread_fn+0x56d/0x8d0
kthread+0x309/0x400
ret_from_fork+0x41/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(),
the cpu offline failed, but sched_smt_present is decremented before
calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so
fix it by incrementing sched_smt_present in the error path.
Fixes: c5511d03ec ("sched/smt: Make sched_smt_present track topology")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20240703031610.587047-3-yangyingliang@huaweicloud.com
In extreme test scenarios:
the 14th field utime in /proc/xx/stat is greater than sum_exec_runtime,
utime = 18446744073709518790 ns, rtime = 135989749728000 ns
In cputime_adjust() process, stime is greater than rtime due to
mul_u64_u64_div_u64() precision problem.
before call mul_u64_u64_div_u64(),
stime = 175136586720000, rtime = 135989749728000, utime = 1416780000.
after call mul_u64_u64_div_u64(),
stime = 135989949653530
unsigned reversion occurs because rtime is less than stime.
utime = rtime - stime = 135989749728000 - 135989949653530
= -199925530
= (u64)18446744073709518790
Trigger condition:
1). User task run in kernel mode most of time
2). ARM64 architecture
3). TICK_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
Fix mul_u64_u64_div_u64() conversion precision by reset stime to rtime
Fixes: 3dc167ba57 ("sched/cputime: Improve cputime_adjust()")
Signed-off-by: Zheng Zucheng <zhengzucheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20240726023235.217771-1-zhengzucheng@huawei.com
Context tracking state related symbols currently use a mix of the
CONTEXT_ (e.g. CONTEXT_KERNEL) and CT_SATE_ (e.g. CT_STATE_MASK) prefixes.
Clean up the naming and make the ctx_state enum use the CT_STATE_ prefix.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
and credit him in CREDITS.
- Harmonize the lock-yielding behavior on dynamically selected
preemption models with static ones.
- Reorganize the code a bit: split out sched/syscalls.c to reduce
the size of sched/core.c
- Micro-optimize psi_group_change()
- Fix set_load_weight() for SCHED_IDLE tasks
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lLab
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
and credit him in CREDITS
- Harmonize the lock-yielding behavior on dynamically selected
preemption models with static ones
- Reorganize the code a bit: split out sched/syscalls.c to reduce
the size of sched/core.c
- Micro-optimize psi_group_change()
- Fix set_load_weight() for SCHED_IDLE tasks
- Misc cleanups & fixes
* tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Update MAINTAINERS and CREDITS
sched/fair: set_load_weight() must also call reweight_task() for SCHED_IDLE tasks
sched/psi: Optimise psi_group_change a bit
sched/core: Drop spinlocks on contention iff kernel is preemptible
sched/core: Move preempt_model_*() helpers from sched.h to preempt.h
sched/balance: Skip unnecessary updates to idle load balancer's flags
idle: Remove stale RCU comment
sched/headers: Move struct pre-declarations to the beginning of the header
sched/core: Clean up kernel/sched/sched.h a bit
sched/core: Simplify prefetch_curr_exec_start()
sched: Fix spelling in comments
sched/syscalls: Split out kernel/sched/syscalls.c from kernel/sched/core.c
doc.2024.06.06a: Update Tasks RCU and Tasks Rude RCU description in
Requirements.rst and clarify rcu_assign_pointer() and
rcu_dereference() ordering properties.
fixes.2024.07.04a: Add lockdep assertions for RCU readers, limit inline
wakeups for callback-bypass synchronize_rcu(), add an
rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter,
add Uladzislau Rezki as RCU maintainer, and fix a subtle
callback-migration memory-ordering issue.
mb.2024.06.28a: Remove a number of redundant memory barriers.
nocb.2024.06.03a: Remove unnecessary bypass-list lock-contention
mitigation, use parking API instead of open-coded ad-hoc
equivalent, and upgrade obsolete comments.
rcu-tasks.2024.06.06a: Revert avoidance of a deadlock that can no
longer occur and properly synchronize Tasks Trace RCU checking
of runqueues.
rcutorture.2024.06.06a: Add tests for handling of double-call_rcu()
bug, add missing MODULE_DESCRIPTION, and add a script that
histograms the number of calls to RCU updaters.
srcu.2024.06.18a: Fill out SRCU polled-grace-period API.
-----BEGIN PGP SIGNATURE-----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=7a1C
-----END PGP SIGNATURE-----
Merge tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Update Tasks RCU and Tasks Rude RCU description in Requirements.rst
and clarify rcu_assign_pointer() and rcu_dereference() ordering
properties
- Add lockdep assertions for RCU readers, limit inline wakeups for
callback-bypass synchronize_rcu(), add an
rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add
Uladzislau Rezki as RCU maintainer, and fix a subtle
callback-migration memory-ordering issue
- Remove a number of redundant memory barriers
- Remove unnecessary bypass-list lock-contention mitigation, use
parking API instead of open-coded ad-hoc equivalent, and upgrade
obsolete comments
- Revert avoidance of a deadlock that can no longer occur and properly
synchronize Tasks Trace RCU checking of runqueues
- Add tests for handling of double-call_rcu() bug, add missing
MODULE_DESCRIPTION, and add a script that histograms the number of
calls to RCU updaters
- Fill out SRCU polled-grace-period API
* tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation
rcu: Eliminate lockless accesses to rcu_sync->gp_count
MAINTAINERS: Add Uladzislau Rezki as RCU maintainer
rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter
rcu/exp: Remove redundant full memory barrier at the end of GP
rcu: Remove full memory barrier on RCU stall printout
rcu: Remove full memory barrier on boot time eqs sanity check
rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove full ordering on second EQS snapshot
srcu: Fill out polled grace-period APIs
srcu: Update cleanup_srcu_struct() comment
srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE
srcu: Disable interrupts directly in srcu_gp_end()
rcu: Disable interrupts directly in rcu_gp_init()
rcu/tree: Reduce wake up for synchronize_rcu() common case
rcu/tasks: Fix stale task snaphot for Tasks Trace
tools/rcu: Add rcu-updaters.sh script
rcutorture: Add missing MODULE_DESCRIPTION() macros
rcutorture: Fix rcu_torture_fwd_cb_cr() data race
...
The type_id is defined as u32type, if(type_id<0) is invalid, hence
modified its type to s32.
./kernel/sched/ext.c:4958:5-12: WARNING: Unsigned expression compared with zero: type_id < 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9523
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In ops.dispatch(), SCX_DSQ_LOCAL_ON can be used to dispatch the task to the
local DSQ of any CPU. However, during direct dispatch from ops.select_cpu()
and ops.enqueue(), this isn't allowed. This is because dispatching to the
local DSQ of a remote CPU requires locking both the task's current and new
rq's and such double locking can't be done directly from ops.enqueue().
While waking up a task, as ops.select_cpu() can pick any CPU and both
ops.select_cpu() and ops.enqueue() can use SCX_DSQ_LOCAL as the dispatch
target to dispatch to the DSQ of the picked CPU, the BPF scheduler can still
do whatever it wants to do. However, while a task is being enqueued for a
different reason, e.g. after its slice expiration, only ops.enqueue() is
called and there's no way for the BPF scheduler to directly dispatch to the
local DSQ of a remote CPU. This gap in API forces schedulers into
work-arounds which are not straightforward or optimal such as skipping
direct dispatches in such cases.
Implement deferred enqueueing to allow directly dispatching to the local DSQ
of a remote CPU from ops.select_cpu() and ops.enqueue(). Such tasks are
temporarily queued on rq->scx.ddsp_deferred_locals. When the rq lock can be
safely released, the tasks are taken off the list and queued on the target
local DSQs using dispatch_to_local_dsq().
v2: - Add missing return after queue_balance_callback() in
schedule_deferred(). (David).
- dispatch_to_local_dsq() now assumes that @rq is locked but unpinned
and thus no longer takes @rf. Updated accordingly.
- UP build warning fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Cc: Changwoo Min <changwoo@igalia.com>
SCX_RQ_BALANCING is used to mark that the rq is currently in balance().
Rename it to SCX_RQ_IN_BALANCE and add SCX_RQ_IN_WAKEUP which marks whether
the rq is currently enqueueing for a wakeup. This will be used to implement
direct dispatching to local DSQ of another CPU.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
sched_ext often needs to migrate tasks across CPUs right before execution
and thus uses the balance path to dispatch tasks from the BPF scheduler.
balance_scx() is called with rq locked and pinned but is passed @rf and thus
allowed to unpin and unlock. Currently, @rf is passed down the call stack so
the rq lock is unpinned just when double locking is needed.
This creates unnecessary complications such as having to explicitly
manipulate lock pinning for core scheduling. We also want to use
dispatch_to_local_dsq_lock() from other paths which are called with rq
locked but unpinned.
rq lock handling in the dispatch path is straightforward outside the
migration implementation and extending the pinning protection down the
callstack doesn't add enough meaningful extra protection to justify the
extra complexity.
Unpin and repin rq lock from the outer balance_scx() and drop @rf passing
and lock pinning handling from the inner functions. UP is updated to call
balance_one() instead of balance_scx() to avoid adding NULL @rf handling to
balance_scx(). AS this makes balance_scx() unused in UP, it's put inside a
CONFIG_SMP block.
No functional changes intended outside of lock annotation updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Righi <righi.andrea@gmail.com>
task_linked_on_dsq() exists as a helper because it used to test both the
rbtree and list nodes. It now only tests the list node and the list node
will soon be used for something else too. The helper doesn't improve
anything materially and the naming will become confusing. Open-code the list
node testing and remove task_linked_on_dsq()
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Move struct balance_callback definition upward so that it's visible to
class-specific rq struct definitions. This will be used to embed a struct
balance_callback in struct scx_rq.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
When a running task is migrated to another CPU, the stop_task is used to
preempt the running task and migrate it. This, expectedly, invokes
ops.cpu_release(). If the BPF scheduler then calls
scx_bpf_reenqueue_local(), it re-enqueues all tasks on the local DSQ
including the task which is being migrated.
This creates an unnecessary re-enqueue of a task which is about to be
deactivated and re-activated for migration anyway. It can also cause
confusion for the BPF scheduler as scx_bpf_task_cpu() of the task and its
allowed CPUs may not agree while migration is pending.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 245254f708 ("sched_ext: Implement sched_ext_ops.cpu_acquire/release()")
Acked-by: David Vernet <void@manifault.com>
scx_bpf_reenqueue_local() is used to re-enqueue tasks on the local DSQ from
ops.cpu_release(). Because the BPF scheduler may dispatch tasks to the same
local DSQ, to avoid processing the same tasks repeatedly, it first takes the
number of queued tasks and processes the task at the head of the queue that
number of times.
This is incorrect as a task can be dispatched to the same local DSQ with
SCX_ENQ_HEAD. Such a task will be processed repeatedly until the count is
exhausted and the succeeding tasks won't be processed at all.
Fix it by first moving all candidate tasks to a private list and then
processing that list. While at it, remove the WARNs. They're rather
superflous as later steps will check them anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 245254f708 ("sched_ext: Implement sched_ext_ops.cpu_acquire/release()")
Acked-by: David Vernet <void@manifault.com>
DSQs are very opaque in the consumption path. The BPF scheduler has no way
of knowing which tasks are being considered and which is picked. This patch
adds BPF DSQ iterator.
- Allows iterating tasks queued on a DSQ in the dispatch order or reverse
from anywhere using bpf_for_each(scx_dsq) or calling the iterator kfuncs
directly.
- Has ordering guarantee where only tasks which were already queued when the
iteration started are visible and consumable during the iteration.
v5: - Add a comment to the naked list_empty(&dsq->list) test in
consume_dispatch_q() to explain the reasoning behind the lockless test
and by extension why nldsq_next_task() isn't used there.
- scx_qmap changes separated into its own patch.
v4: - bpf_iter_scx_dsq_new() declaration in common.bpf.h was using the wrong
type for the last argument (bool rev instead of u64 flags). Fix it.
v3: - Alexei pointed out that the iterator is too big to allocate on stack.
Added a prep patch to reduce the size of the cursor. Now
bpf_iter_scx_dsq is 48 bytes and bpf_iter_scx_dsq_kern is 40 bytes on
64bit.
- u32_before() comparison factored out.
v2: - scx_bpf_consume_task() is separated out into a separate patch.
- DSQ seq and iter flags don't need to be u64. Use u32.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: bpf@vger.kernel.org
struct scx_dsq_node contains two data structure nodes to link the containing
task to a DSQ and a flags field that is protected by the lock of the
associated DSQ. One reason why they are grouped into a struct is to use the
type independently as a cursor node when iterating tasks on a DSQ. However,
when iterating, the cursor only needs to be linked on the FIFO list and the
rb_node part ends up inflating the size of the iterator data structure
unnecessarily making it potentially too expensive to place it on stack.
Take ->priq and ->flags out of scx_dsq_node and put them in sched_ext_entity
as ->dsq_priq and ->dsq_flags, respectively. scx_dsq_node is renamed to
scx_dsq_list_node and the field names are renamed accordingly. This will
help implementing DSQ task iterator that can be allocated on stack.
No functional change intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: David Vernet <void@manifault.com>
While sched_ext was out of tree, everything sched_ext specific which can be
put in kernel/sched/ext.h was put there to ease forward porting. However,
kernel/sched/sched.h is the better location for some of them. Relocate.
- struct sched_enq_and_set_ctx, sched_deq_and_put_task() and
sched_enq_and_set_task().
- scx_enabled() and scx_switched_all().
- for_active_class_range() and for_each_active_class(). sched_class
declarations are moved above the class iterators for this.
No functional changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Vernet <void@manifault.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
For flexibility, sched_ext allows the BPF scheduler to select the CPU to
execute a task on at dispatch time so that e.g. a queue can be shared across
multiple CPUs. To enable this, the dispatch path is executed from balance()
so that a dispatched task can be hot-migrated to its target CPU. This means
that sched_ext needs its balance() method invoked before every
pick_next_task() even when the CPU is waking up from SCHED_IDLE.
for_balance_class_range() defined in kernel/sched/ext.h implements this
selective iteration promotion. However, the indirection obfuscates more than
helps. Open code the iteration promotion in put_prev_task_balance() and
remove for_balance_class_range().
No functional changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
- scx_ops_cpu_preempt is only used in kernel/sched/ext.c and doesn't need to
be global. Make it static.
- Relocate task_on_scx() so that the inline functions are located together.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
sched_domains regulate the load balancing for sched_classes. A machine can
be partitioned into multiple sections that are not load-balanced across
using either isolcpus= boot param or cpuset partitions. In such cases, tasks
that are in one partition are expected to stay within that partition.
cpuset configured partitions are always reflected in each member task's
cpumask. As SCX always honors the task cpumasks, the BPF scheduler is
automatically in compliance with the configured partitions.
However, for isolcpus= domain isolation, the isolated CPUs are simply
omitted from the top-level sched_domain[s] without further restrictions on
tasks' cpumasks, so, for example, a task currently running in an isolated
CPU may have more CPUs in its allowed cpumask while expected to remain on
the same CPU.
There is no straightforward way to enforce this partitioning preemptively on
BPF schedulers and erroring out after a violation can be surprising.
isolcpus= domain isolation is being replaced with cpuset partitions anyway,
so keep it simple and simply disallow loading a BPF scheduler if isolcpus=
domain isolation is in effect.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20240626082342.GY31592@noisy.programming.kicks-ass.net
Cc: David Vernet <void@manifault.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
When initializing p->scx.weight, scx_ops_enable_task() wasn't considering
whether the task is SCHED_IDLE. Update it to use WEIGHT_IDLEPRIO as the
source weight for SCHED_IDLE tasks. This leaves reweight_task_scx() the sole
user of set_task_scx_weight(). Open code it. @weight is going to be provided
by sched core in the future anyway.
v2: Use the newly available @lw->weight to set @p->scx.weight in
reweight_task_scx().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Peter Zijlstra <peterz@infradead.org>
sched_fork() returns with -EAGAIN if dl_prio(@p). a7a9fc5492 ("sched_ext:
Add boilerplate for extensible scheduler class") added scx_pre_fork() call
before it and then scx_cancel_fork() on the exit path. This is silly as the
dl_prio() block can just be moved above the scx_pre_fork() call.
Move the dl_prio() block above the scx_pre_fork() call and remove the now
unnecessary scx_cancel_fork() invocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Vernet <void@manifault.com>
rq contains many useful fields to implement a custom scheduler. For
example, various clock signals like clock_task and clock_pelt can be
used to track load. It also contains stats in other sched_classes, which
are useful to drive scheduling decisions in ext.
tj: Put the new helper below scx_bpf_task_*() helpers.
Signed-off-by: Hongyan Xia <hongyan.xia2@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
d329605287 ("sched/fair: set_load_weight() must also call reweight_task()
for SCHED_IDLE tasks") applied to sched/core changes how reweight_task() is
called causing conflicts with e83edbf88f ("sched: Add
sched_class->reweight_task()"). Resolve the conflicts by taking
set_load_weight() changes from d329605287 and updating
sched_class->reweight_task() to take pointer to struct load_weight instead
of int prio.
Signed-off-by: Tejun Heo<tj@kernel.org>
When a task's weight is being changed, set_load_weight() is called with
@update_load set. As weight changes aren't trivial for the fair class,
set_load_weight() calls fair.c::reweight_task() for fair class tasks.
However, set_load_weight() first tests task_has_idle_policy() on entry and
skips calling reweight_task() for SCHED_IDLE tasks. This is buggy as
SCHED_IDLE tasks are just fair tasks with a very low weight and they would
incorrectly skip load, vlag and position updates.
Fix it by updating reweight_task() to take struct load_weight as idle weight
can't be expressed with prio and making set_load_weight() call
reweight_task() for SCHED_IDLE tasks too when @update_load is set.
Fixes: 9059393e4e ("sched/fair: Use reweight_entity() for set_user_nice()")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # v4.15+
Link: http://lkml.kernel.org/r/20240624102331.GI31592@noisy.programming.kicks-ass.net
The current code loops over the psi_states only to call a helper which
then resolves back to the action needed for each state using a switch
statement. That is effectively creating a double indirection of a kind
which, given how all the states need to be explicitly listed and handled
anyway, we can simply remove. Both the for loop and the switch statement
that is.
The benefit is both in the code size and CPU time spent in this function.
YMMV but on my Steam Deck, while in a game, the patch makes the CPU usage
go from ~2.4% down to ~1.2%. Text size at the same time went from 0x323 to
0x2c1.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20240625135000.38652-1-tursulin@igalia.com
alloc_exit_info() calls kcalloc() but puts in the size of the element as the
first argument which triggers the following gcc warning:
kernel/sched/ext.c:3815:32: warning: ‘kmalloc_array_noprof’ sizes
specified with ‘sizeof’ in the earlier argument and not in the later
argument [-Wcalloc-transposed-args]
Fix it by swapping the positions of the first two arguments. No functional
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vishal Chourasia <vishalc@linux.ibm.com>
Link: http://lkml.kernel.org/r/ZoG6zreEtQhAUr_2@linux.ibm.com
It was reported that in moving to 6.1, a larger then 10%
regression was seen in the performance of
clock_gettime(CLOCK_THREAD_CPUTIME_ID,...).
Using a simple reproducer, I found:
5.10:
100000000 calls in 24345994193 ns => 243.460 ns per call
100000000 calls in 24288172050 ns => 242.882 ns per call
100000000 calls in 24289135225 ns => 242.891 ns per call
6.1:
100000000 calls in 28248646742 ns => 282.486 ns per call
100000000 calls in 28227055067 ns => 282.271 ns per call
100000000 calls in 28177471287 ns => 281.775 ns per call
The cause of this was finally narrowed down to the addition of
psi_account_irqtime() in update_rq_clock_task(), in commit
52b1364ba0 ("sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ
pressure").
In my initial attempt to resolve this, I leaned towards moving
all accounting work out of the clock_gettime() call path, but it
wasn't very pretty, so it will have to wait for a later deeper
rework. Instead, Peter shared this approach:
Rework psi_account_irqtime() to use its own psi_irq_time base
for accounting, and move it out of the hotpath, calling it
instead from sched_tick() and __schedule().
In testing this, we found the importance of ensuring
psi_account_irqtime() is run under the rq_lock, which Johannes
Weiner helpfully explained, so also add some lockdep annotations
to make that requirement clear.
With this change the performance is back in-line with 5.10:
6.1+fix:
100000000 calls in 24297324597 ns => 242.973 ns per call
100000000 calls in 24318869234 ns => 243.189 ns per call
100000000 calls in 24291564588 ns => 242.916 ns per call
Reported-by: Jimmy Shiu <jimmyshiu@google.com>
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/r/20240618215909.4099720-1-jstultz@google.com
During the execution of the following stress test with linux-rt:
stress-ng --cyclic 30 --timeout 30 --minimize --quiet
kmemleak frequently reported a memory leak concerning the task_struct:
unreferenced object 0xffff8881305b8000 (size 16136):
comm "stress-ng", pid 614, jiffies 4294883961 (age 286.412s)
object hex dump (first 32 bytes):
02 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
debug hex dump (first 16 bytes):
53 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 S...............
backtrace:
[<00000000046b6790>] dup_task_struct+0x30/0x540
[<00000000c5ca0f0b>] copy_process+0x3d9/0x50e0
[<00000000ced59777>] kernel_clone+0xb0/0x770
[<00000000a50befdc>] __do_sys_clone+0xb6/0xf0
[<000000001dbf2008>] do_syscall_64+0x5d/0xf0
[<00000000552900ff>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
The issue occurs in start_dl_timer(), which increments the task_struct
reference count and sets a timer. The timer callback, dl_task_timer,
is supposed to decrement the reference count upon expiration. However,
if enqueue_task_dl() is called before the timer expires and cancels it,
the reference count is not decremented, leading to the leak.
This patch fixes the reference leak by ensuring the task_struct
reference count is properly decremented when the timer is canceled.
Fixes: feff2e65ef ("sched/deadline: Unthrottle PI boosted threads while enqueuing")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20240620125618.11419-1-wander@redhat.com
This reverts commit b0defa7ae0.
b0defa7ae0 changed the load balancing logic to ignore env.max_loop if
all tasks examined to that point were pinned. The goal of the patch was
to make it more likely to be able to detach a task buried in a long list
of pinned tasks. However, this has the unfortunate side effect of
creating an O(n) iteration in detach_tasks(), as we now must fully
iterate every task on a cpu if all or most are pinned. Since this load
balance code is done with rq lock held, and often in softirq context, it
is very easy to trigger hard lockups. We observed such hard lockups with
a user who affined O(10k) threads to a single cpu.
When I discussed this with Vincent he initially suggested that we keep
the limit on the number of tasks to detach, but increase the number of
tasks we can search. However, after some back and forth on the mailing
list, he recommended we instead revert the original patch, as it seems
likely no one was actually getting hit by the original issue.
Fixes: b0defa7ae0 ("sched/fair: Make sure to try to detach at least one movable task")
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240620214450.316280-1-joshdon@google.com
Correct eight to weight in the description of the .set_weight()
operation in sched_ext_ops.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The scx_bpf_cpuperf_set() kfunc allows a BPF program to set the relative
performance target of a specified CPU. Commit d86adb4fc0 ("sched_ext: Add
cpuperf support") defined the @cpu argument to be unsigned. Let's update it
to be signed to match the norm for the rest of ext.c and the kernel.
Note that the kfunc declaration of scx_bpf_cpuperf_set() in the
common.bpf.h header in tools/sched_ext already listed the cpu as signed, so
this also fixes the build for tools/sched_ext and the sched_ext selftests
due to kfunc declarations now being emitted in vmlinux.h based on BTF (thus
causing the compiler to error due to observing conflicting types).
Fixes: d86adb4fc0 ("sched_ext: Add cpuperf support")
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
sched_ext currently does not integrate with schedutil. When schedutil is the
governor, frequencies are left unregulated and usually get stuck close to
the highest performance level from running RT tasks.
Add CPU performance monitoring and scaling support by integrating into
schedutil. The following kfuncs are added:
- scx_bpf_cpuperf_cap(): Query the relative performance capacity of
different CPUs in the system.
- scx_bpf_cpuperf_cur(): Query the current performance level of a CPU
relative to its max performance.
- scx_bpf_cpuperf_set(): Set the current target performance level of a CPU.
This gives direct control over CPU performance setting to the BPF scheduler.
The only changes on the schedutil side are accounting for the utilization
factor from sched_ext and disabling frequency holding heuristics as it may
not apply well to sched_ext schedulers which may have a lot weaker
connection between tasks and their current / last CPU.
With cpuperf support added, there is no reason to block uclamp. Enable while
at it.
A toy implementation of cpuperf is added to scx_qmap as a demonstration of
the feature.
v2: Ignore cpu_util_cfs_boost() when scx_switched_all() in sugov_get_util()
to avoid factoring in stale util metric. (Christian)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Christian Loehle <christian.loehle@arm.com>
sugov_cpu_is_busy() is used to avoid decreasing performance level while the
CPU is busy and called by sugov_update_single_freq() and
sugov_update_single_perf(). Both callers repeat the same pattern to first
test for uclamp and then the business. Let's refactor so that the tests
aren't repeated.
The new helper is named sugov_hold_freq() and tests both the uclamp
exception and CPU business. No functional changes. This will make adding
more exception conditions easier.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
scx_next_task_picked() is used by sched_ext to notify the BPF scheduler when
a CPU is taken away by a task dispatched from a higher priority sched_class
so that the BPF scheduler can, e.g., punt the task[s] which was running or
were waiting for the CPU to other CPUs.
Replace the sched_ext specific hook scx_next_task_picked() with a new
sched_class operation switch_class().
The changes are straightforward and the code looks better afterwards.
However, when !CONFIG_SCHED_CLASS_EXT, this ends up adding an unused hook
which is unlikely to be useful to other sched_classes. For further
discussion on this subject, please refer to the following:
http://lkml.kernel.org/r/CAHk-=wjFPLqo7AXu8maAGEGnOy6reUg-F4zzFhVB0Kyu22h7pw@mail.gmail.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Add Documentation/scheduler/sched-ext.rst which gives a high-level overview
and pointers to the examples.
v6: - Add paragraph explaining debug dump.
v5: - Updated to reflect /sys/kernel interface change. Kconfig options
added.
v4: - README improved, reformatted in markdown and renamed to README.md.
v3: - Added tools/sched_ext/README.
- Dropped _example prefix from scheduler names.
v2: - Apply minor edits suggested by Bagas. Caveats section dropped as all
of them are addressed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Currently, a dsq is always a FIFO. A task which is dispatched earlier gets
consumed or executed earlier. While this is sufficient when dsq's are used
for simple staging areas for tasks which are ready to execute, it'd make
dsq's a lot more useful if they can implement custom ordering.
This patch adds a vtime-ordered priority queue to dsq's. When the BPF
scheduler dispatches a task with the new scx_bpf_dispatch_vtime() helper, it
can specify the vtime tha the task should be inserted at and the task is
inserted into the priority queue in the dsq which is ordered according to
time_before64() comparison of the vtime values.
A DSQ can either be a FIFO or priority queue and automatically switches
between the two depending on whether scx_bpf_dispatch() or
scx_bpf_dispatch_vtime() is used. Using the wrong variant while the DSQ
already has the other type queued is not allowed and triggers an ops error.
Built-in DSQs must always be FIFOs.
This makes it very easy for the BPF schedulers to implement proper vtime
based scheduling within each dsq very easy and efficient at a negligible
cost in terms of code complexity and overhead.
scx_simple and scx_example_flatcg are updated to default to weighted
vtime scheduling (the latter within each cgroup). FIFO scheduling can be
selected with -f option.
v4: - As allowing mixing priority queue and FIFO on the same DSQ sometimes
led to unexpected starvations, DSQs now error out if both modes are
used at the same time and the built-in DSQs are no longer allowed to
be priority queues.
- Explicit type struct scx_dsq_node added to contain fields needed to be
linked on DSQs. This will be used to implement stateful iterator.
- Tasks are now always linked on dsq->list whether the DSQ is in FIFO or
PRIQ mode. This confines PRIQ related complexities to the enqueue and
dequeue paths. Other paths only need to look at dsq->list. This will
also ease implementing BPF iterator.
- Print p->scx.dsq_flags in debug dump.
v3: - SCX_TASK_DSQ_ON_PRIQ flag is moved from p->scx.flags into its own
p->scx.dsq_flags. The flag is protected with the dsq lock unlike other
flags in p->scx.flags. This led to flag corruption in some cases.
- Add comments explaining the interaction between using consumption of
p->scx.slice to determine vtime progress and yielding.
v2: - p->scx.dsq_vtime was not initialized on load or across cgroup
migrations leading to some tasks being stalled for extended period of
time depending on how saturated the machine is. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
The core-sched support is composed of the following parts:
- task_struct->scx.core_sched_at is added. This is a timestamp which can be
used to order tasks. Depending on whether the BPF scheduler implements
custom ordering, it tracks either global FIFO ordering of all tasks or
local-DSQ ordering within the dispatched tasks on a CPU.
- prio_less() is updated to call scx_prio_less() when comparing SCX tasks.
scx_prio_less() calls ops.core_sched_before() if available or uses the
core_sched_at timestamp. For global FIFO ordering, the BPF scheduler
doesn't need to do anything. Otherwise, it should implement
ops.core_sched_before() which reflects the ordering.
- When core-sched is enabled, balance_scx() balances all SMT siblings so
that they all have tasks dispatched if necessary before pick_task_scx() is
called. pick_task_scx() picks between the current task and the first
dispatched task on the local DSQ based on availability and the
core_sched_at timestamps. Note that FIFO ordering is expected among the
already dispatched tasks whether running or on the local DSQ, so this path
always compares core_sched_at instead of calling into
ops.core_sched_before().
qmap_core_sched_before() is added to scx_qmap. It scales the
distances from the heads of the queues to compare the tasks across different
priority queues and seems to behave as expected.
v3: Fixed build error when !CONFIG_SCHED_SMT reported by Andrea Righi.
v2: Sched core added the const qualifiers to prio_less task arguments.
Explicitly drop them for ops.core_sched_before() task arguments. BPF
enforces access control through the verifier, so the qualifier isn't
actually operative and only gets in the way when interacting with
various helpers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Reviewed-by: Josh Don <joshdon@google.com>
Cc: Andrea Righi <andrea.righi@canonical.com>
PM operations freeze userspace. Some BPF schedulers have active userspace
component and may misbehave as expected across PM events. While the system
is frozen, nothing too interesting is happening in terms of scheduling and
we can get by just fine with the fallback FIFO behavior. Let's make things
easier by always bypassing the BPF scheduler while PM events are in
progress.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Add ops.cpu_online/offline() which are invoked when CPUs come online and
offline respectively. As the enqueue path already automatically bypasses
tasks to the local dsq on a deactivated CPU, BPF schedulers are guaranteed
to see tasks only on CPUs which are between online() and offline().
If the BPF scheduler doesn't implement ops.cpu_online/offline(), the
scheduler is automatically exited with SCX_ECODE_RESTART |
SCX_ECODE_RSN_HOTPLUG. Userspace can implement CPU hotpplug support
trivially by simply reinitializing and reloading the scheduler.
scx_qmap is updated to print out online CPUs on hotplug events. Other
schedulers are updated to restart based on ecode.
v3: - The previous implementation added @reason to
sched_class.rq_on/offline() to distinguish between CPU hotplug events
and topology updates. This was buggy and fragile as the methods are
skipped if the current state equals the target state. Instead, add
scx_rq_[de]activate() which are directly called from
sched_cpu_de/activate(). This also allows ops.cpu_on/offline() to
sleep which can be useful.
- ops.dispatch() could be called on a CPU that the BPF scheduler was
told to be offline. The dispatch patch is updated to bypass in such
cases.
v2: - To accommodate lock ordering change between scx_cgroup_rwsem and
cpus_read_lock(), CPU hotplug operations are put into its own SCX_OPI
block and enabled eariler during scx_ope_enable() so that
cpus_read_lock() can be dropped before acquiring scx_cgroup_rwsem.
- Auto exit with ECODE added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Scheduler classes are strictly ordered and when a higher priority class has
tasks to run, the lower priority ones lose access to the CPU. Being able to
monitor and act on these events are necessary for use cases includling
strict core-scheduling and latency management.
This patch adds two operations ops.cpu_acquire() and .cpu_release(). The
former is invoked when a CPU becomes available to the BPF scheduler and the
opposite for the latter. This patch also implements
scx_bpf_reenqueue_local() which can be called from .cpu_release() to trigger
requeueing of all tasks in the local dsq of the CPU so that the tasks can be
reassigned to other available CPUs.
scx_pair is updated to use .cpu_acquire/release() along with
%SCX_KICK_WAIT to make the pair scheduling guarantee strict even when a CPU
is preempted by a higher priority scheduler class.
scx_qmap is updated to use .cpu_acquire/release() to empty the local
dsq of a preempted CPU. A similar approach can be adopted by BPF schedulers
that want to have a tight control over latency.
v4: Use the new SCX_KICK_IDLE to wake up a CPU after re-enqueueing.
v3: Drop the const qualifier from scx_cpu_release_args.task. BPF enforces
access control through the verifier, so the qualifier isn't actually
operative and only gets in the way when interacting with various
helpers.
v2: Add p->scx.kf_mask annotation to allow calling scx_bpf_reenqueue_local()
from ops.cpu_release() nested inside ops.init() and other sleepable
operations.
Signed-off-by: David Vernet <dvernet@meta.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
If set when calling scx_bpf_kick_cpu(), the invoking CPU will busy wait for
the kicked cpu to enter the scheduler. See the following for example usage:
https://github.com/sched-ext/scx/blob/main/scheds/c/scx_pair.bpf.c
v2: - Updated to fit the updated kick_cpus_irq_workfn() implementation.
- Include SCX_KICK_WAIT related information in debug dump.
Signed-off-by: David Vernet <dvernet@meta.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
When some SCX operations are in flight, it is known that the subject task's
rq lock is held throughout which makes it safe to access certain fields of
the task - e.g. its current task_group. We want to add SCX kfunc helpers
that can make use of this guarantee - e.g. to help determining the currently
associated CPU cgroup from the task's current task_group.
As it'd be dangerous call such a helper on a task which isn't rq lock
protected, the helper should be able to verify the input task and reject
accordingly. This patch adds sched_ext_entity.kf_tasks[] that track the
tasks which are currently being operated on by a terminal SCX operation. The
new SCX_CALL_OP_[2]TASK[_RET]() can be used when invoking SCX operations
which take tasks as arguments and the scx_kf_allowed_on_arg_tasks() can be
used by kfunc helpers to verify the input task status.
Note that as sched_ext_entity.kf_tasks[] can't handle nesting, the tracking
is currently only limited to terminal SCX operations. If needed in the
future, this restriction can be removed by moving the tracking to the task
side with a couple per-task counters.
v2: Updated to reflect the addition of SCX_KF_SELECT_CPU.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Allow BPF schedulers to indicate tickless operation by setting p->scx.slice
to SCX_SLICE_INF. A CPU whose current task has infinte slice goes into
tickless operation.
scx_central is updated to use tickless operations for all tasks and
instead use a BPF timer to expire slices. This also uses the SCX_ENQ_PREEMPT
and task state tracking added by the previous patches.
Currently, there is no way to pin the timer on the central CPU, so it may
end up on one of the worker CPUs; however, outside of that, the worker CPUs
can go tickless both while running sched_ext tasks and idling.
With schbench running, scx_central shows:
root@test ~# grep ^LOC /proc/interrupts; sleep 10; grep ^LOC /proc/interrupts
LOC: 142024 656 664 449 Local timer interrupts
LOC: 161663 663 665 449 Local timer interrupts
Without it:
root@test ~ [SIGINT]# grep ^LOC /proc/interrupts; sleep 10; grep ^LOC /proc/interrupts
LOC: 188778 3142 3793 3993 Local timer interrupts
LOC: 198993 5314 6323 6438 Local timer interrupts
While scx_central itself is too barebone to be useful as a
production scheduler, a more featureful central scheduler can be built using
the same approach. Google's experience shows that such an approach can have
significant benefits for certain applications such as VM hosting.
v4: Allow operation even if BPF_F_TIMER_CPU_PIN is not available.
v3: Pin the central scheduler's timer on the central_cpu using
BPF_F_TIMER_CPU_PIN.
v2: Convert to BPF inline iterators.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Being able to track the task runnable and running state transitions are
useful for a variety of purposes including latency tracking and load factor
calculation.
Currently, BPF schedulers don't have a good way of tracking these
transitions. Becoming runnable can be determined from ops.enqueue() but
becoming quiescent can only be inferred from the lack of subsequent enqueue.
Also, as the local dsq can have multiple tasks and some events are handled
in the sched_ext core, it's difficult to determine when a given task starts
and stops executing.
This patch adds sched_ext_ops.runnable(), .running(), .stopping() and
.quiescent() operations to track the task runnable and running state
transitions. They're mostly self explanatory; however, we want to ensure
that running <-> stopping transitions are always contained within runnable
<-> quiescent transitions which is a bit different from how the scheduler
core behaves. This adds a bit of complication. See the comment in
dequeue_task_scx().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
The dispatch path retries if the local DSQ is still empty after
ops.dispatch() either dispatched or consumed a task. This is both out of
necessity and for convenience. It has to retry because the dispatch path
might lose the tasks to dequeue while the rq lock is released while trying
to migrate tasks across CPUs, and the retry mechanism makes ops.dispatch()
implementation easier as it only needs to make some forward progress each
iteration.
However, this makes it possible for ops.dispatch() to stall CPUs by
repeatedly dispatching ineligible tasks. If all CPUs are stalled that way,
the watchdog or sysrq handler can't run and the system can't be saved. Let's
address the issue by breaking out of the dispatch loop after 32 iterations.
It is unlikely but not impossible for ops.dispatch() to legitimately go over
the iteration limit. We want to come back to the dispatch path in such cases
as not doing so risks stalling the CPU by idling with runnable tasks
pending. As the previous task is still current in balance_scx(),
resched_curr() doesn't do anything - it will just get cleared. Let's instead
use scx_kick_bpf() which will trigger reschedule after switching to the next
task which will likely be the idle task.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
It's often useful to wake up and/or trigger reschedule on other CPUs. This
patch adds scx_bpf_kick_cpu() kfunc helper that BPF scheduler can call to
kick the target CPU into the scheduling path.
As a sched_ext task relinquishes its CPU only after its slice is depleted,
this patch also adds SCX_KICK_PREEMPT and SCX_ENQ_PREEMPT which clears the
slice of the target CPU's current task to guarantee that sched_ext's
scheduling path runs on the CPU.
If SCX_KICK_IDLE is specified, the target CPU is kicked iff the CPU is idle
to guarantee that the target CPU will go through at least one full sched_ext
scheduling cycle after the kicking. This can be used to wake up idle CPUs
without incurring unnecessary overhead if it isn't currently idle.
As a demonstration of how backward compatibility can be supported using BPF
CO-RE, tools/sched_ext/include/scx/compat.bpf.h is added. It provides
__COMPAT_scx_bpf_kick_cpu_IDLE() which uses SCX_KICK_IDLE if available or
becomes a regular kicking otherwise. This allows schedulers to use the new
SCX_KICK_IDLE while maintaining support for older kernels. The plan is to
temporarily use compat helpers to ease API updates and drop them after a few
kernel releases.
v5: - SCX_KICK_IDLE added. Note that this also adds a compat mechanism for
schedulers so that they can support kernels without SCX_KICK_IDLE.
This is useful as a demonstration of how new feature flags can be
added in a backward compatible way.
- kick_cpus_irq_workfn() reimplemented so that it touches the pending
cpumasks only as necessary to reduce kicking overhead on machines with
a lot of CPUs.
- tools/sched_ext/include/scx/compat.bpf.h added.
v4: - Move example scheduler to its own patch.
v3: - Make scx_example_central switch all tasks by default.
- Convert to BPF inline iterators.
v2: - Julia Lawall reported that scx_example_central can overflow the
dispatch buffer and malfunction. As scheduling for other CPUs can't be
handled by the automatic retry mechanism, fix by implementing an
explicit overflow and retry handling.
- Updated to use generic BPF cpumask helpers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
If a BPF scheduler triggers an error, the scheduler is aborted and the
system is reverted to the built-in scheduler. In the process, a lot of
information which may be useful for figuring out what happened can be lost.
This patch adds debug dump which captures information which may be useful
for debugging including runqueue and runnable thread states at the time of
failure. The following shows a debug dump after triggering the watchdog:
root@test ~# os/work/tools/sched_ext/build/bin/scx_qmap -t 100
stats : enq=1 dsp=0 delta=1 deq=0
stats : enq=90 dsp=90 delta=0 deq=0
stats : enq=156 dsp=156 delta=0 deq=0
stats : enq=218 dsp=218 delta=0 deq=0
stats : enq=255 dsp=255 delta=0 deq=0
stats : enq=271 dsp=271 delta=0 deq=0
stats : enq=284 dsp=284 delta=0 deq=0
stats : enq=293 dsp=293 delta=0 deq=0
DEBUG DUMP
================================================================================
kworker/u32:12[320] triggered exit kind 1026:
runnable task stall (stress[1530] failed to run for 6.841s)
Backtrace:
scx_watchdog_workfn+0x136/0x1c0
process_scheduled_works+0x2b5/0x600
worker_thread+0x269/0x360
kthread+0xeb/0x110
ret_from_fork+0x36/0x40
ret_from_fork_asm+0x1a/0x30
QMAP FIFO[0]:
QMAP FIFO[1]:
QMAP FIFO[2]: 1436
QMAP FIFO[3]:
QMAP FIFO[4]:
CPU states
----------
CPU 0 : nr_run=1 ops_qseq=244
curr=swapper/0[0] class=idle_sched_class
QMAP: dsp_idx=1 dsp_cnt=0
R stress[1530] -6841ms
scx_state/flags=3/0x1 ops_state/qseq=2/20
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=ff
QMAP: force_local=0
asm_sysvec_apic_timer_interrupt+0x16/0x20
CPU 2 : nr_run=2 ops_qseq=142
curr=swapper/2[0] class=idle_sched_class
QMAP: dsp_idx=1 dsp_cnt=0
R sshd[1703] -5905ms
scx_state/flags=3/0x9 ops_state/qseq=2/88
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=ff
QMAP: force_local=1
__x64_sys_ppoll+0xf6/0x120
do_syscall_64+0x7b/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
R fish[1539] -4141ms
scx_state/flags=3/0x9 ops_state/qseq=2/124
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=ff
QMAP: force_local=1
futex_wait+0x60/0xe0
do_futex+0x109/0x180
__x64_sys_futex+0x117/0x190
do_syscall_64+0x7b/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
CPU 3 : nr_run=2 ops_qseq=162
curr=kworker/u32:12[320] class=ext_sched_class
QMAP: dsp_idx=1 dsp_cnt=0
*R kworker/u32:12[320] +0ms
scx_state/flags=3/0xd ops_state/qseq=0/0
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=ff
QMAP: force_local=0
scx_dump_state+0x613/0x6f0
scx_ops_error_irq_workfn+0x1f/0x40
irq_work_run_list+0x82/0xd0
irq_work_run+0x14/0x30
__sysvec_irq_work+0x40/0x140
sysvec_irq_work+0x60/0x70
asm_sysvec_irq_work+0x16/0x20
scx_watchdog_workfn+0x15f/0x1c0
process_scheduled_works+0x2b5/0x600
worker_thread+0x269/0x360
kthread+0xeb/0x110
ret_from_fork+0x36/0x40
ret_from_fork_asm+0x1a/0x30
R kworker/3:2[1436] +0ms
scx_state/flags=3/0x9 ops_state/qseq=2/160
sticky/holding_cpu=-1/-1 dsq_id=(n/a)
cpus=08
QMAP: force_local=0
kthread+0xeb/0x110
ret_from_fork+0x36/0x40
ret_from_fork_asm+0x1a/0x30
CPU 7 : nr_run=0 ops_qseq=76
curr=swapper/7[0] class=idle_sched_class
================================================================================
EXIT: runnable task stall (stress[1530] failed to run for 6.841s)
It shows that CPU 3 was running the watchdog when it triggered the error
condition and the scx_qmap thread has been queued on CPU 0 for over 5
seconds but failed to run. It also prints out scx_qmap specific information
- e.g. which tasks are queued on each FIFO and so on using the dump_*() ops.
This dump has proved pretty useful for developing and debugging BPF
schedulers.
Debug dump is generated automatically when the BPF scheduler exits due to an
error. The debug buffer used in such cases is determined by
sched_ext_ops.exit_dump_len and defaults to 32k. If the debug dump overruns
the available buffer, the output is truncated and marked accordingly.
Debug dump output can also be read through the sched_ext_dump tracepoint.
When read through the tracepoint, there is no length limit.
SysRq-D can be used to trigger debug dump at any time while a BPF scheduler
is loaded. This is non-destructive - the scheduler keeps running afterwards.
The output can be read through the sched_ext_dump tracepoint.
v2: - The size of exit debug dump buffer can now be customized using
sched_ext_ops.exit_dump_len.
- sched_ext_ops.dump*() added to enable dumping of BPF scheduler
specific information.
- Tracpoint output and SysRq-D triggering added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
It would be useful to see what the sched_ext scheduler state is, and what
scheduler is running, when we're dumping a task's stack. This patch
therefore adds a new print_scx_info() function that's called in the same
context as print_worker_info() and print_stop_info(). An example dump
follows.
BUG: kernel NULL pointer dereference, address: 0000000000000999
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 13 PID: 2047 Comm: insmod Tainted: G O 6.6.0-work-10323-gb58d4cae8e99-dirty #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 2/2/2022
Sched_ext: qmap (enabled+all), task: runnable_at=-17ms
RIP: 0010:init_module+0x9/0x1000 [test_module]
...
v3: - scx_ops_enable_state_str[] definition moved to an earlier patch as
it's now used by core implementation.
- Convert jiffy delta to msecs using jiffies_to_msecs() instead of
multiplying by (HZ / MSEC_PER_SEC). The conversion is implemented in
jiffies_delta_msecs().
v2: - We are now using scx_ops_enable_state_str[] outside
CONFIG_SCHED_DEBUG. Move it outside of CONFIG_SCHED_DEBUG and to the
top. This was reported by Changwoo and Andrea.
Signed-off-by: David Vernet <void@manifault.com>
Reported-by: Changwoo Min <changwoo@igalia.com>
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
BPF schedulers might not want to schedule certain tasks - e.g. kernel
threads. This patch adds p->scx.disallow which can be set by BPF schedulers
in such cases. The field can be changed anytime and setting it in
ops.prep_enable() guarantees that the task can never be scheduled by
sched_ext.
scx_qmap is updated with the -d option to disallow a specific PID:
# echo $$
1092
# grep -E '(policy)|(ext\.enabled)' /proc/self/sched
policy : 0
ext.enabled : 0
# ./set-scx 1092
# grep -E '(policy)|(ext\.enabled)' /proc/self/sched
policy : 7
ext.enabled : 0
Run "scx_qmap -p -d 1092" in another terminal.
# cat /sys/kernel/sched_ext/nr_rejected
1
# grep -E '(policy)|(ext\.enabled)' /proc/self/sched
policy : 0
ext.enabled : 0
# ./set-scx 1092
setparam failed for 1092 (Permission denied)
- v4: Refreshed on top of tip:sched/core.
- v3: Update description to reflect /sys/kernel/sched_ext interface change.
- v2: Use atomic_long_t instead of atomic64_t for scx_kick_cpus_pnt_seqs to
accommodate 32bit archs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Barret Rhoden <brho@google.com>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
The most common and critical way that a BPF scheduler can misbehave is by
failing to run runnable tasks for too long. This patch implements a
watchdog.
* All tasks record when they become runnable.
* A watchdog work periodically scans all runnable tasks. If any task has
stayed runnable for too long, the BPF scheduler is aborted.
* scheduler_tick() monitors whether the watchdog itself is stuck. If so, the
BPF scheduler is aborted.
Because the watchdog only scans the tasks which are currently runnable and
usually very infrequently, the overhead should be negligible.
scx_qmap is updated so that it can be told to stall user and/or
kernel tasks.
A detected task stall looks like the following:
sched_ext: BPF scheduler "qmap" errored, disabling
sched_ext: runnable task stall (dbus-daemon[953] failed to run for 6.478s)
scx_check_timeout_workfn+0x10e/0x1b0
process_one_work+0x287/0x560
worker_thread+0x234/0x420
kthread+0xe9/0x100
ret_from_fork+0x1f/0x30
A detected watchdog stall:
sched_ext: BPF scheduler "qmap" errored, disabling
sched_ext: runnable task stall (watchdog failed to check in for 5.001s)
scheduler_tick+0x2eb/0x340
update_process_times+0x7a/0x90
tick_sched_timer+0xd8/0x130
__hrtimer_run_queues+0x178/0x3b0
hrtimer_interrupt+0xfc/0x390
__sysvec_apic_timer_interrupt+0xb7/0x2b0
sysvec_apic_timer_interrupt+0x90/0xb0
asm_sysvec_apic_timer_interrupt+0x1b/0x20
default_idle+0x14/0x20
arch_cpu_idle+0xf/0x20
default_idle_call+0x50/0x90
do_idle+0xe8/0x240
cpu_startup_entry+0x1d/0x20
kernel_init+0x0/0x190
start_kernel+0x0/0x392
start_kernel+0x324/0x392
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0x104/0x109
secondary_startup_64_no_verify+0xce/0xdb
Note that this patch exposes scx_ops_error[_type]() in kernel/sched/ext.h to
inline scx_notify_sched_tick().
v4: - While disabling, cancel_delayed_work_sync(&scx_watchdog_work) was
being called before forward progress was guaranteed and thus could
lead to system lockup. Relocated.
- While enabling, it was comparing msecs against jiffies without
conversion leading to spurious load failures on lower HZ kernels.
Fixed.
- runnable list management is now used by core bypass logic and moved to
the patch implementing sched_ext core.
v3: - bpf_scx_init_member() was incorrectly comparing ops->timeout_ms
against SCX_WATCHDOG_MAX_TIMEOUT which is in jiffies without
conversion leading to spurious load failures in lower HZ kernels.
Fixed.
v2: - Julia Lawall noticed that the watchdog code was mixing msecs and
jiffies. Fix by using jiffies for everything.
Signed-off-by: David Vernet <dvernet@meta.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
This enables the admin to abort the BPF scheduler and revert to CFS anytime.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Implement a new scheduler class sched_ext (SCX), which allows scheduling
policies to be implemented as BPF programs to achieve the following:
1. Ease of experimentation and exploration: Enabling rapid iteration of new
scheduling policies.
2. Customization: Building application-specific schedulers which implement
policies that are not applicable to general-purpose schedulers.
3. Rapid scheduler deployments: Non-disruptive swap outs of scheduling
policies in production environments.
sched_ext leverages BPF’s struct_ops feature to define a structure which
exports function callbacks and flags to BPF programs that wish to implement
scheduling policies. The struct_ops structure exported by sched_ext is
struct sched_ext_ops, and is conceptually similar to struct sched_class. The
role of sched_ext is to map the complex sched_class callbacks to the more
simple and ergonomic struct sched_ext_ops callbacks.
For more detailed discussion on the motivations and overview, please refer
to the cover letter.
Later patches will also add several example schedulers and documentation.
This patch implements the minimum core framework to enable implementation of
BPF schedulers. Subsequent patches will gradually add functionalities
including safety guarantee mechanisms, nohz and cgroup support.
include/linux/sched/ext.h defines struct sched_ext_ops. With the comment on
top, each operation should be self-explanatory. The followings are worth
noting:
- Both "sched_ext" and its shorthand "scx" are used. If the identifier
already has "sched" in it, "ext" is used; otherwise, "scx".
- In sched_ext_ops, only .name is mandatory. Every operation is optional and
if omitted a simple but functional default behavior is provided.
- A new policy constant SCHED_EXT is added and a task can select sched_ext
by invoking sched_setscheduler(2) with the new policy constant. However,
if the BPF scheduler is not loaded, SCHED_EXT is the same as SCHED_NORMAL
and the task is scheduled by CFS. When the BPF scheduler is loaded, all
tasks which have the SCHED_EXT policy are switched to sched_ext.
- To bridge the workflow imbalance between the scheduler core and
sched_ext_ops callbacks, sched_ext uses simple FIFOs called dispatch
queues (dsq's). By default, there is one global dsq (SCX_DSQ_GLOBAL), and
one local per-CPU dsq (SCX_DSQ_LOCAL). SCX_DSQ_GLOBAL is provided for
convenience and need not be used by a scheduler that doesn't require it.
SCX_DSQ_LOCAL is the per-CPU FIFO that sched_ext pulls from when putting
the next task on the CPU. The BPF scheduler can manage an arbitrary number
of dsq's using scx_bpf_create_dsq() and scx_bpf_destroy_dsq().
- sched_ext guarantees system integrity no matter what the BPF scheduler
does. To enable this, each task's ownership is tracked through
p->scx.ops_state and all tasks are put on scx_tasks list. The disable path
can always recover and revert all tasks back to CFS. See p->scx.ops_state
and scx_tasks.
- A task is not tied to its rq while enqueued. This decouples CPU selection
from queueing and allows sharing a scheduling queue across an arbitrary
subset of CPUs. This adds some complexities as a task may need to be
bounced between rq's right before it starts executing. See
dispatch_to_local_dsq() and move_task_to_local_dsq().
- One complication that arises from the above weak association between task
and rq is that synchronizing with dequeue() gets complicated as dequeue()
may happen anytime while the task is enqueued and the dispatch path might
need to release the rq lock to transfer the task. Solving this requires a
bit of complexity. See the logic around p->scx.sticky_cpu and
p->scx.ops_qseq.
- Both enable and disable paths are a bit complicated. The enable path
switches all tasks without blocking to avoid issues which can arise from
partially switched states (e.g. the switching task itself being starved).
The disable path can't trust the BPF scheduler at all, so it also has to
guarantee forward progress without blocking. See scx_ops_enable() and
scx_ops_disable_workfn().
- When sched_ext is disabled, static_branches are used to shut down the
entry points from hot paths.
v7: - scx_ops_bypass() was incorrectly and unnecessarily trying to grab
scx_ops_enable_mutex which can lead to deadlocks in the disable path.
Fixed.
- Fixed TASK_DEAD handling bug in scx_ops_enable() path which could lead
to use-after-free.
- Consolidated per-cpu variable usages and other cleanups.
v6: - SCX_NR_ONLINE_OPS replaced with SCX_OPI_*_BEGIN/END so that multiple
groups can be expressed. Later CPU hotplug operations are put into
their own group.
- SCX_OPS_DISABLING state is replaced with the new bypass mechanism
which allows temporarily putting the system into simple FIFO
scheduling mode bypassing the BPF scheduler. In addition to the shut
down path, this will also be used to isolate the BPF scheduler across
PM events. Enabling and disabling the bypass mode requires iterating
all runnable tasks. rq->scx.runnable_list addition is moved from the
later watchdog patch.
- ops.prep_enable() is replaced with ops.init_task() and
ops.enable/disable() are now called whenever the task enters and
leaves sched_ext instead of when the task becomes schedulable on
sched_ext and stops being so. A new operation - ops.exit_task() - is
called when the task stops being schedulable on sched_ext.
- scx_bpf_dispatch() can now be called from ops.select_cpu() too. This
removes the need for communicating local dispatch decision made by
ops.select_cpu() to ops.enqueue() via per-task storage.
SCX_KF_SELECT_CPU is added to support the change.
- SCX_TASK_ENQ_LOCAL which told the BPF scheudler that
scx_select_cpu_dfl() wants the task to be dispatched to the local DSQ
was removed. Instead, scx_bpf_select_cpu_dfl() now dispatches directly
if it finds a suitable idle CPU. If such behavior is not desired,
users can use scx_bpf_select_cpu_dfl() which returns the verdict in a
bool out param.
- scx_select_cpu_dfl() was mishandling WAKE_SYNC and could end up
queueing many tasks on a local DSQ which makes tasks to execute in
order while other CPUs stay idle which made some hackbench numbers
really bad. Fixed.
- The current state of sched_ext can now be monitored through files
under /sys/sched_ext instead of /sys/kernel/debug/sched/ext. This is
to enable monitoring on kernels which don't enable debugfs.
- sched_ext wasn't telling BPF that ops.dispatch()'s @prev argument may
be NULL and a BPF scheduler which derefs the pointer without checking
could crash the kernel. Tell BPF. This is currently a bit ugly. A
better way to annotate this is expected in the future.
- scx_exit_info updated to carry pointers to message buffers instead of
embedding them directly. This decouples buffer sizes from API so that
they can be changed without breaking compatibility.
- exit_code added to scx_exit_info. This is used to indicate different
exit conditions on non-error exits and will be used to handle e.g. CPU
hotplugs.
- The patch "sched_ext: Allow BPF schedulers to switch all eligible
tasks into sched_ext" is folded in and the interface is changed so
that partial switching is indicated with a new ops flag
%SCX_OPS_SWITCH_PARTIAL. This makes scx_bpf_switch_all() unnecessasry
and in turn SCX_KF_INIT. ops.init() is now called with
SCX_KF_SLEEPABLE.
- Code reorganized so that only the parts necessary to integrate with
the rest of the kernel are in the header files.
- Changes to reflect the BPF and other kernel changes including the
addition of bpf_sched_ext_ops.cfi_stubs.
v5: - To accommodate 32bit configs, p->scx.ops_state is now atomic_long_t
instead of atomic64_t and scx_dsp_buf_ent.qseq which uses
load_acquire/store_release is now unsigned long instead of u64.
- Fix the bug where bpf_scx_btf_struct_access() was allowing write
access to arbitrary fields.
- Distinguish kfuncs which can be called from any sched_ext ops and from
anywhere. e.g. scx_bpf_pick_idle_cpu() can now be called only from
sched_ext ops.
- Rename "type" to "kind" in scx_exit_info to make it easier to use on
languages in which "type" is a reserved keyword.
- Since cff9b2332a ("kernel/sched: Modify initial boot task idle
setup"), PF_IDLE is not set on idle tasks which haven't been online
yet which made scx_task_iter_next_filtered() include those idle tasks
in iterations leading to oopses. Update scx_task_iter_next_filtered()
to directly test p->sched_class against idle_sched_class instead of
using is_idle_task() which tests PF_IDLE.
- Other updates to match upstream changes such as adding const to
set_cpumask() param and renaming check_preempt_curr() to
wakeup_preempt().
v4: - SCHED_CHANGE_BLOCK replaced with the previous
sched_deq_and_put_task()/sched_enq_and_set_tsak() pair. This is
because upstream is adaopting a different generic cleanup mechanism.
Once that lands, the code will be adapted accordingly.
- task_on_scx() used to test whether a task should be switched into SCX,
which is confusing. Renamed to task_should_scx(). task_on_scx() now
tests whether a task is currently on SCX.
- scx_has_idle_cpus is barely used anymore and replaced with direct
check on the idle cpumask.
- SCX_PICK_IDLE_CORE added and scx_pick_idle_cpu() improved to prefer
fully idle cores.
- ops.enable() now sees up-to-date p->scx.weight value.
- ttwu_queue path is disabled for tasks on SCX to avoid confusing BPF
schedulers expecting ->select_cpu() call.
- Use cpu_smt_mask() instead of topology_sibling_cpumask() like the rest
of the scheduler.
v3: - ops.set_weight() added to allow BPF schedulers to track weight changes
without polling p->scx.weight.
- move_task_to_local_dsq() was losing SCX-specific enq_flags when
enqueueing the task on the target dsq because it goes through
activate_task() which loses the upper 32bit of the flags. Carry the
flags through rq->scx.extra_enq_flags.
- scx_bpf_dispatch(), scx_bpf_pick_idle_cpu(), scx_bpf_task_running()
and scx_bpf_task_cpu() now use the new KF_RCU instead of
KF_TRUSTED_ARGS to make it easier for BPF schedulers to call them.
- The kfunc helper access control mechanism implemented through
sched_ext_entity.kf_mask is improved. Now SCX_CALL_OP*() is always
used when invoking scx_ops operations.
v2: - balance_scx_on_up() is dropped. Instead, on UP, balance_scx() is
called from put_prev_taks_scx() and pick_next_task_scx() as necessary.
To determine whether balance_scx() should be called from
put_prev_task_scx(), SCX_TASK_DEQD_FOR_SLEEP flag is added. See the
comment in put_prev_task_scx() for details.
- sched_deq_and_put_task() / sched_enq_and_set_task() sequences replaced
with SCHED_CHANGE_BLOCK().
- Unused all_dsqs list removed. This was a left-over from previous
iterations.
- p->scx.kf_mask is added to track and enforce which kfunc helpers are
allowed. Also, init/exit sequences are updated to make some kfuncs
always safe to call regardless of the current BPF scheduler state.
Combined, this should make all the kfuncs safe.
- BPF now supports sleepable struct_ops operations. Hacky workaround
removed and operations and kfunc helpers are tagged appropriately.
- BPF now supports bitmask / cpumask helpers. scx_bpf_get_idle_cpumask()
and friends are added so that BPF schedulers can use the idle masks
with the generic helpers. This replaces the hacky kfunc helpers added
by a separate patch in V1.
- CONFIG_SCHED_CLASS_EXT can no longer be enabled if SCHED_CORE is
enabled. This restriction will be removed by a later patch which adds
core-sched support.
- Add MAINTAINERS entries and other misc changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Co-authored-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Cc: Andrea Righi <andrea.righi@canonical.com>
This adds dummy implementations of sched_ext interfaces which interact with
the scheduler core and hook them in the correct places. As they're all
dummies, this doesn't cause any behavior changes. This is split out to help
reviewing.
v2: balance_scx_on_up() dropped. This will be handled in sched_ext proper.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
A new BPF extensible sched_class will need to dynamically change how a task
picks its sched_class. For example, if the loaded BPF scheduler progs fail,
the tasks will be forced back on CFS even if the task's policy is set to the
new sched_class. To support such mapping, add normal_policy() which wraps
testing for %SCHED_NORMAL. This doesn't cause any behavior changes.
v2: Update the description with more details on the expected use.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
RT, DL, thermal and irq load and utilization metrics need to be decayed and
updated periodically and before consumption to keep the numbers reasonable.
This is currently done from __update_blocked_others() as a part of the fair
class load balance path. Let's factor it out to update_other_load_avgs().
Pure refactor. No functional changes.
This will be used by the new BPF extensible scheduling class to ensure that
the above metrics are properly maintained.
v2: Refreshed on top of tip:sched/core.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Factor out sched_weight_from/to_cgroup() which convert between scheduler
shares and cgroup weight. No functional change. The factored out functions
will be used by a new BPF extensible sched_class so that the weights can be
exposed to the BPF programs in a way which is consistent cgroup weights and
easier to interpret.
The weight conversions will be used regardless of cgroup usage. It's just
borrowing the cgroup weight range as it's more intuitive.
CGROUP_WEIGHT_MIN/DFL/MAX constants are moved outside CONFIG_CGROUPS so that
the conversion helpers can always be defined.
v2: The helpers are now defined regardless of COFNIG_CGROUPS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
When a task switches to a new sched_class, the prev and new classes are
notified through ->switched_from() and ->switched_to(), respectively, after
the switching is done.
A new BPF extensible sched_class will have callbacks that allow the BPF
scheduler to keep track of relevant task states (like priority and cpumask).
Those callbacks aren't called while a task is on a different sched_class.
When a task comes back, we wanna tell the BPF progs the up-to-date state
before the task gets enqueued, so we need a hook which is called before the
switching is committed.
This patch adds ->switching_to() which is called during sched_class switch
through check_class_changing() before the task is restored. Also, this patch
exposes check_class_changing/changed() in kernel/sched/sched.h. They will be
used by the new BPF extensible sched_class to implement implicit sched_class
switching which is used e.g. when falling back to CFS when the BPF scheduler
fails or unloads.
This is a prep patch and doesn't cause any behavior changes. The new
operation and exposed functions aren't used yet.
v3: Refreshed on top of tip:sched/core.
v2: Improve patch description w/ details on planned use.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Currently, during a task weight change, sched core directly calls
reweight_task() defined in fair.c if @p is on CFS. Let's make it a proper
sched_class operation instead. CFS's reweight_task() is renamed to
reweight_task_fair() and now called through sched_class.
While it turns a direct call into an indirect one, set_load_weight() isn't
called from a hot path and this change shouldn't cause any noticeable
difference. This will be used to implement reweight_task for a new BPF
extensible sched_class so that it can keep its cached task weight
up-to-date.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
A new BPF extensible sched_class will need more control over the forking
process. It wants to be able to fail from sched_cgroup_fork() after the new
task's sched_task_group is initialized so that the loaded BPF program can
prepare the task with its cgroup association is established and reject fork
if e.g. allocation fails.
Allow sched_cgroup_fork() to fail by making it return int instead of void
and adding sched_cancel_fork() to undo sched_fork() in the error path.
sched_cgroup_fork() doesn't fail yet and this patch shouldn't cause any
behavior changes.
v2: Patch description updated to detail the expected use.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Currently, sched_init() checks that the sched_class'es are in the expected
order by testing each adjacency which is a bit brittle and makes it
cumbersome to add optional sched_class'es. Instead, let's verify whether
they're in the expected order using sched_class_above() which is what
matters.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: David Vernet <dvernet@meta.com>
When RCU-TASKS-TRACE pre-gp takes a snapshot of the current task running
on all online CPUs, no explicit ordering synchronizes properly with a
context switch. This lack of ordering can permit the new task to miss
pre-grace-period update-side accesses. The following diagram, courtesy
of Paul, shows the possible bad scenario:
CPU 0 CPU 1
----- -----
// Pre-GP update side access
WRITE_ONCE(*X, 1);
smp_mb();
r0 = rq->curr;
RCU_INIT_POINTER(rq->curr, TASK_B)
spin_unlock(rq)
rcu_read_lock_trace()
r1 = X;
/* ignore TASK_B */
Either r0==TASK_B or r1==1 is needed but neither is guaranteed.
One possible solution to solve this is to wait for an RCU grace period
at the beginning of the RCU-tasks-trace grace period before taking the
current tasks snaphot. However this would introduce large additional
latencies to RCU-tasks-trace grace periods.
Another solution is to lock the target runqueue while taking the current
task snapshot. This ensures that the update side sees the latest context
switch and subsequent context switches will see the pre-grace-period
update side accesses.
This commit therefore adds runqueue locking to cpu_curr_snapshot().
Fixes: e386b67257 ("rcu-tasks: Eliminate RCU Tasks Trace IPIs to online CPUs")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We observed that the overhead on trigger_load_balance(), now renamed
sched_balance_trigger(), has risen with a system's core counts.
For an OLTP workload running 6.8 kernel on a 2 socket x86 systems
having 96 cores/socket, we saw that 0.7% cpu cycles are spent in
trigger_load_balance(). On older systems with fewer cores/socket, this
function's overhead was less than 0.1%.
The cause of this overhead was that there are multiple cpus calling
kick_ilb(flags), updating the balancing work needed to a common idle
load balancer cpu. The ilb_cpu's flags field got updated unconditionally
with atomic_fetch_or(). The atomic read and writes to ilb_cpu's flags
causes much cache bouncing and cpu cycles overhead. This is seen in the
annotated profile below.
kick_ilb():
if (ilb_cpu < 0)
test %r14d,%r14d
↑ js 6c
flags = atomic_fetch_or(flags, nohz_flags(ilb_cpu));
mov $0x2d600,%rdi
movslq %r14d,%r8
mov %rdi,%rdx
add -0x7dd0c3e0(,%r8,8),%rdx
arch_atomic_read():
0.01 mov 0x64(%rdx),%esi
35.58 add $0x64,%rdx
arch_atomic_fetch_or():
static __always_inline int arch_atomic_fetch_or(int i, atomic_t *v)
{
int val = arch_atomic_read(v);
do { } while (!arch_atomic_try_cmpxchg(v, &val, val | i));
0.03 157: mov %r12d,%ecx
arch_atomic_try_cmpxchg():
return arch_try_cmpxchg(&v->counter, old, new);
0.00 mov %esi,%eax
arch_atomic_fetch_or():
do { } while (!arch_atomic_try_cmpxchg(v, &val, val | i));
or %esi,%ecx
arch_atomic_try_cmpxchg():
return arch_try_cmpxchg(&v->counter, old, new);
0.01 lock cmpxchg %ecx,(%rdx)
42.96 ↓ jne 2d2
kick_ilb():
With instrumentation, we found that 81% of the updates do not result in
any change in the ilb_cpu's flags. That is, multiple cpus are asking
the ilb_cpu to do the same things over and over again, before the ilb_cpu
has a chance to run NOHZ load balance.
Skip updates to ilb_cpu's flags if no new work needs to be done.
Such updates do not change ilb_cpu's NOHZ flags. This requires an extra
atomic read but it is less expensive than frequent unnecessary atomic
updates that generate cache bounces.
We saw that on the OLTP workload, cpu cycles from trigger_load_balance()
(or sched_balance_trigger()) got reduced from 0.7% to 0.2%.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240531205452.65781-1-tim.c.chen@linux.intel.com
The call of rcu_idle_enter() from within cpuidle_idle_call() was
removed in commit 1098582a0f ("sched,idle,rcu: Push rcu_idle deeper
into the idle path") which makes the comment out of place.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/5b936388-47df-4050-9229-6617a6c2bba5@arm.com
