In __ipv6_sock_mc_join(), per-socket mld data is protected by lock_sock(),
and only __dev_get_by_index() requires RTNL.
Let's use dev_get_by_index() and drop RTNL for IPV6_ADD_MEMBERSHIP and
MCAST_JOIN_GROUP.
Note that we must call rt6_lookup() and dev_hold() under RCU.
If rt6_lookup() returns an entry from the exception table, dst_dev_put()
could change rt->dev.dst to loopback concurrently, and the original device
could lose the refcount before dev_hold() and unblock device registration.
dst_dev_put() is called from NETDEV_UNREGISTER and synchronize_net() follows
it, so as long as rt6_lookup() and dev_hold() are called within the same
RCU critical section, the dev is alive.
Even if the race happens, they are synchronised by idev->dead and mcast
addresses are cleaned up.
For the racy access to rt->dst.dev, we use dst_dev().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-7-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As well as __ipv6_dev_mc_inc(), all code in __ipv6_dev_mc_dec() are
protected by inet6_dev->mc_lock, and RTNL is not needed.
Let's use in6_dev_get() in ipv6_dev_mc_dec() and remove ASSERT_RTNL()
in __ipv6_dev_mc_dec().
Now, we can remove the RTNL comment above addrconf_leave_solict() too.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-6-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 63ed8de4be ("mld: add mc_lock for protecting per-interface
mld data"), the newly allocated struct ifmcaddr6 cannot be removed until
inet6_dev->mc_lock is released, so mca_get() and mc_put() are unnecessary.
Let's remove the extra refcounting.
Note that mca_get() was only used in __ipv6_dev_mc_inc().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-5-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 63ed8de4be ("mld: add mc_lock for protecting
per-interface mld data"), every multicast resource is protected
by inet6_dev->mc_lock.
RTNL is unnecessary in terms of protection but still needed for
synchronisation between addrconf_ifdown() and __ipv6_dev_mc_inc().
Once we removed RTNL, there would be a race below, where we could
add a multicast address to a dead inet6_dev.
CPU1 CPU2
==== ====
addrconf_ifdown() __ipv6_dev_mc_inc()
if (idev->dead) <-- false
dead = true return -ENODEV;
ipv6_mc_destroy_dev() / ipv6_mc_down()
mutex_lock(&idev->mc_lock)
...
mutex_unlock(&idev->mc_lock)
mutex_lock(&idev->mc_lock)
...
mutex_unlock(&idev->mc_lock)
The race window can be easily closed by checking inet6_dev->dead
under inet6_dev->mc_lock in __ipv6_dev_mc_inc() as addrconf_ifdown()
will acquire it after marking inet6_dev dead.
Let's check inet6_dev->dead under mc_lock in __ipv6_dev_mc_inc().
Note that now __ipv6_dev_mc_inc() no longer depends on RTNL and
we can remove ASSERT_RTNL() there and the RTNL comment above
addrconf_join_solict().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-4-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 63ed8de4be ("mld: add mc_lock for protecting per-interface
mld data") added the same comments regarding locking to many functions.
Let's replace the comments with lockdep annotation, which is more helpful.
Note that we just remove the comment for mld_clear_zeros() and
mld_send_cr(), where mc_dereference() is used in the entry of the
function.
While at it, a comment for __ipv6_sock_mc_join() is moved back to the
correct place.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-3-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_dev_mc_{inc,dec}() has the same check.
Let's remove __in6_dev_get() from pndisc_constructor() and
pndisc_destructor().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-2-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since its introduction in commit 2e910b9532 ("net: Add a function to
splice pages into an skbuff for MSG_SPLICE_PAGES"), skb_splice_from_iter()
never used the @gfp argument. Remove it and adapt callers.
No functional change intended.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250702-splice-drop-unused-v3-2-55f68b60d2b7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ADDRLABEL only works when it was set in compilation phase. Replace it with
net_dbg_ratelimited().
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702104417.1526138-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit f75a2804da.
With all states (whether user or kern) removed from the hashtables
during deletion, there's no need for synchronous destruction of
states. xfrm6_tunnel states still need to have been destroyed (which
will be the case when its last user is deleted (not destroyed)) so
that xfrm6_tunnel_free_spi removes it from the per-netns hashtable
before the netns is destroyed.
This has the benefit of skipping one synchronize_rcu per state (in
__xfrm_state_destroy(sync=true)) when we exit a netns.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The ipcomp fallback tunnels currently get deleted (from the various
lists and hashtables) as the last user state that needed that fallback
is destroyed (not deleted). If a reference to that user state still
exists, the fallback state will remain on the hashtables/lists,
triggering the WARN in xfrm_state_fini. Because of those remaining
references, the fix in commit f75a2804da ("xfrm: destroy xfrm_state
synchronously on net exit path") is not complete.
We recently fixed one such situation in TCP due to defered freeing of
skbs (commit 9b6412e697 ("tcp: drop secpath at the same time as we
currently drop dst")). This can also happen due to IP reassembly: skbs
with a secpath remain on the reassembly queue until netns
destruction. If we can't guarantee that the queues are flushed by the
time xfrm_state_fini runs, there may still be references to a (user)
xfrm_state, preventing the timely deletion of the corresponding
fallback state.
Instead of chasing each instance of skbs holding a secpath one by one,
this patch fixes the issue directly within xfrm, by deleting the
fallback state as soon as the last user state depending on it has been
deleted. Destruction will still happen when the final reference is
dropped.
A separate lockdep class for the fallback state is required since
we're going to lock x->tunnel while x is locked.
Fixes: 9d4139c769 ("netns xfrm: per-netns xfrm_state_all list")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Since commit 0e23387491 ("ipv6: fix races in ip6_dst_destroy()"),
'table' is unused in __fib6_drop_pcpu_from(), no need pass it from
fib6_drop_pcpu_from().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701041235.1333687-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
change 'Maximium' to 'Maximum'
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20250702055820.112190-1-zhaochenguang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MSG_ZEROCOPY data must be copied before data is queued to local
sockets, to avoid indefinite timeout until memory release.
This test is performed by skb_orphan_frags_rx, which is called when
looping an egress skb to packet sockets, error queue or ingress path.
To preserve zerocopy for skbs that are looped to ingress but are then
forwarded to an egress device rather than delivered locally, defer
this last check until an skb enters the local IP receive path.
This is analogous to existing behavior of skb_clear_delivery_time.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630194312.1571410-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both functions are always called under RCU.
We remove the extra rcu_read_lock()/rcu_read_unlock().
We use skb_dst_dev_net_rcu() instead of skb_dst_dev_net().
We use dev_net_rcu() instead of dev_net().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helpers as a step to deal with potential dst->dev races.
v2: fix typo in ipv6_rthdr_rcv() (kernel test robot <lkp@intel.com>)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helper as a step to deal with potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(dst_entry)->lastuse is read and written locklessly,
add corresponding annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(dst_entry)->expires is read and written locklessly,
add corresponding annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Move tcp_memory_allocated into a dedicated cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The referenced commit replaced a call to __xfrm4|6_udp_encap_rcv() with
a custom check for non-ESP markers. But what the called function also
did was setting the transport header to the ESP header. The function
that follows, esp4|6_gro_receive(), relies on that being set when it calls
xfrm_parse_spi(). We have to set the full offset as the skb's head was
not moved yet so adding just the UDP header length won't work.
Fixes: e3fd057776 ("xfrm: Fix UDP GRO handling for some corner cases")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Fix a typo:
lenghts -> length
The typo has been identified using codespell, and the tool currently
does not report any additional issues in comments.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629171226.4988-2-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is possible via the ioctl API:
> ip -6 tunnel change ip6tnl0 mode any
Let's align the netlink API:
> ip link set ip6tnl0 type ip6tnl mode any
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20250630145602.1027220-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now inet_rtx_syn_ack() is only used by TCP, it can directly
call tcp_rtx_synack() instead of using an indirect call
to req->rsk_ops->rtx_syn_ack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250626153017.2156274-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lwtunnel_fill_encap() has NULL check and return 0, so no need
to check before call it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250624140015.3929241-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Difference between sock_i_uid() and sk_uid() is that
after sock_orphan(), sock_i_uid() returns GLOBAL_ROOT_UID
while sk_uid() returns the last cached sk->sk_uid value.
None of sock_i_uid() callers care about this.
Use sk_uid() which is much faster and inlined.
Note that diag/dump users are calling sock_i_ino() and
can not see the full benefit yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_uid can be read while another thread changes its
value in sockfs_setattr().
Add sk_uid(const struct sock *sk) helper to factorize the needed
READ_ONCE() annotations, and add corresponding WRITE_ONCE()
where needed.
Fixes: 86741ec254 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 3e6a0243ff ("gre: Fix again IPv6 link-local address
generation."), addrconf_gre_config() has stopped handling IP6GRE
devices specially and just calls the regular addrconf_addr_gen()
function to create their link-local IPv6 addresses.
We can thus avoid using addrconf_gre_config() for IP6GRE devices and
use the normal IPv6 initialisation path instead (that is, jump directly
to addrconf_dev_config() in addrconf_init_auto_addrs()).
See commit 3e6a0243ff ("gre: Fix again IPv6 link-local address
generation.") for a deeper explanation on how and why GRE devices
started handling their IPv6 link-local address generation specially,
why it was a problem, and why this is not even necessary in most cases
(especially for GRE over IPv6).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/a9144be9c7ec3cf09f25becae5e8fdf141fde9f6.1750075076.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Multicast routing is today handled in the input path. Locally generated MC
packets don't hit the IPMR code today. Thus if a VXLAN remote address is
multicast, the driver needs to set an OIF during route lookup. Thus MC
routing configuration needs to be kept in sync with the VXLAN FDB and MDB.
Ideally, the VXLAN packets would be routed by the MC routing code instead.
To that end, this patch adds support to route locally generated multicast
packets. The newly-added routines do largely what ip6_mr_input() and
ip6_mr_forward() do: make an MR cache lookup to find where to send the
packets, and use ip6_output() to send each of them. When no cache entry is
found, the packet is punted to the daemon for resolution.
Similarly to the IPv4 case in a previous patch, the new logic is contingent
on a newly-added IP6CB flag being set.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/3bcc034a3ab4d3c291072fff38f78d7fbbeef4e6.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some of the work of ip6mr_forward2() is specific to IPMR forwarding, and
should not take place on the output path. In order to allow reuse of the
common parts, extract out of the function a helper,
ip6mr_prepare_forward().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/8932bd5c0fbe3f662b158803b8509604fa7bc113.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netfilter hook is invoked with skb->dev for input netdevice, and
vif_dev for output netdevice. However at the point of invocation, skb->dev
is already set to vif_dev, and MR-forwarded packets are reported with
in=out:
# ip6tables -A FORWARD -j LOG --log-prefix '[forw]'
# cd tools/testing/selftests/net/forwarding
# ./router_multicast.sh
# dmesg | fgrep '[forw]'
[ 1670.248245] [forw]IN=v5 OUT=v5 [...]
For reference, IPv4 MR code shows in and out as appropriate.
Fix by caching skb->dev and using the updated value for output netdev.
Fixes: 7bc570c8b4 ("[IPV6] MROUTE: Support multicast forwarding.")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/3141ae8386fbe13fef4b793faa75e6bae58d798a.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6tunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IP6CB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel6_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IPv6 multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/acb4f9f3e40c3a931236c3af08a720b017fbfbfb.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function always returns zero, thus the return value does not carry any
signal. Just make it void.
Most callers already ignore the return value. However:
- Refold arguments of the call from sctp_v6_xmit() so that they fit into
the 80-column limit.
- tipc_udp_xmit() initializes err from the return value, but that should
already be always zero at that point. So there's no practical change, but
elision of the assignment prompts a couple more tweaks to clean up the
function.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/7facacf9d8ca3ca9391a4aee88160913671b868d.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the End.X behavior to accept an output interface as an optional
attribute and make use of it when resolving a route. This is needed when
user space wants to use a link-local address as the nexthop address.
Before:
# ip route add 2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6
# ip route add 2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6
$ ip -6 route show
2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 dev sr6 metric 1024 pref medium
2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6 metric 1024 pref medium
After:
# ip route add 2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6
# ip route add 2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6
$ ip -6 route show
2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6 metric 1024 pref medium
2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6 metric 1024 pref medium
Note that the oif attribute is not dumped to user space when it was not
specified (as an oif of 0) since each entry keeps track of the optional
attributes that it parsed during configuration (see struct
seg6_local_lwt::parsed_optattrs).
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
seg6_lookup_nexthop() is a wrapper around seg6_lookup_any_nexthop().
Change End.X behavior to invoke seg6_lookup_any_nexthop() directly so
that we would not need to expose the new output interface argument
outside of the seg6local module.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
seg6_lookup_any_nexthop() is called by the different endpoint behaviors
(e.g., End, End.X) to resolve an IPv6 route. Extend the function with an
output interface argument so that it could be used to resolve a route
with a certain output interface. This will be used by subsequent patches
that will extend the End.X behavior with an output interface as an
optional argument.
ip6_route_input_lookup() cannot be used when an output interface is
specified as it ignores this parameter. Similarly, calling
ip6_pol_route() when a table ID was not specified (e.g., End.X behavior)
is wrong.
Therefore, when an output interface is specified without a table ID,
resolve the route using ip6_route_output() which will take the output
interface into account.
Note that no endpoint behavior currently passes both a table ID and an
output interface, so the oif argument passed to ip6_pol_route() is
always zero and there are no functional changes in this regard.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid
routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient
packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0mtm
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one.
Fixes: d1df6fd8a1 ("ipv6: sr: define core operations for seg6local lightweight tunnel")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250604113252.371528-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During ILA address translations, the L4 checksums can be handled in
different ways. One of them, adj-transport, consist in parsing the
transport layer and updating any found checksum. This logic relies on
inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when
in state CHECKSUM_COMPLETE.
This bug can be reproduced with a simple ILA to SIR mapping, assuming
packets are received with CHECKSUM_COMPLETE:
$ ip a show dev eth0
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 3333:0:0:1::c078/64 scope global
valid_lft forever preferred_lft forever
inet6 fd00:10:244:1::c078/128 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
$ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \
csum-mode adj-transport ident-type luid dev eth0
Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on
[3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with
SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed
skb->csum. The translation and drop are visible on pwru [1] traces:
IFACE TUPLE FUNC
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ipv6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ip6_rcv_core
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) nf_hook_slow
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) inet_proto_csum_replace_by_diff
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_early_demux
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_route_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input_finish
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_protocol_deliver_rcu
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) raw6_local_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ipv6_raw_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) __skb_checksum_complete
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skb_reason(SKB_DROP_REASON_TCP_CSUM)
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_head_state
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_data
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_free_head
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skbmem
This is happening because inet_proto_csum_replace_by_diff is updating
skb->csum when it shouldn't. The L4 checksum is updated such that it
"cancels" the IPv6 address change in terms of checksum computation, so
the impact on skb->csum is null.
Note this would be different for an IPv4 packet since three fields
would be updated: the IPv4 address, the IP checksum, and the L4
checksum. Two would cancel each other and skb->csum would still need
to be updated to take the L4 checksum change into account.
This patch fixes it by passing an ipv6 flag to
inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're
in the IPv6 case. Note the behavior of the only other user of
inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in
this patch and fixed in the subsequent patch.
With the fix, using the reproduction from above, I can confirm
skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP
SYN proceeds to the application after the ILA translation.
Link: https://github.com/cilium/pwru [1]
Fixes: 65d7ab8de5 ("net: Identifier Locator Addressing module")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmgwd00ACgkQ1w0aZmrP
KyEfwA//RXQ3i8PCa7lKHxDRhVzG3rEvgXRmiXeNd+JjzsCnybBb7+wRf3dtBGWT
+1s44Utx1JqosWxCVBulqYC5bqSC66789l5X2jhYJmUZxRrbcsqPngwnIrjb/XeK
ZJM62wiRhkBQED7yZLGy+y4VHQiG8CEMt16AOQHk863aruWv1tT7up90CTtzA545
4GF/grU3FC0PsoTLwzWyvqsWK+9uk3Y4Tifp5hU3w6uRD9EjX5tHCZlXXSqOF5gu
KT26OYsePYXhJVZIwDf2oVLGi0EVTPB9IFxZSNgLqyXqu2ILAb9OwRNVTNfTP7Pg
1RWJWmgqvRNs9OM2ecifYgQf/AfvCL0Cja1BJOjmvtICuGegrYH7G5YYQsMl9CoE
7jBoTzpToSASat5+dwoz81Bvzh447dYxRE2VmbxmRTTWToQYS1KGBPc9e3u/n5Rr
ruh8tRZ3/R0Fy+YLDkrJst3grh5RLITbuyu4ElJMArPU50mLTVYxKd6nA3BqwB5G
1GmLfCzvQH3e6PKz6CNke1AytVDy/wLTXtcbLnze2Muaj4AqhtOe5Q8ypnOO0Vyk
PsJ6U3rm2asd3GE9+AIx8gZBv8yCu1w9CiwLK8ybT2NETb2dEnqPgWeDyT7rpcaD
sQOPsBE1q/TEp9gofbYCHBm5E2mX9UP7Q6EHCTekrI97xLq8Q2M=
=fBhd
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next,
specifically 26 patches: 5 patches adding/updating selftests,
4 fixes, 3 PREEMPT_RT fixes, and 14 patches to enhance nf_tables):
1) Improve selftest coverage for pipapo 4 bit group format, from
Florian Westphal.
2) Fix incorrect dependencies when compiling a kernel without
legacy ip{6}tables support, also from Florian.
3) Two patches to fix nft_fib vrf issues, including selftest updates
to improve coverage, also from Florian Westphal.
4) Fix incorrect nesting in nft_tunnel's GENEVE support, from
Fernando F. Mancera.
5) Three patches to fix PREEMPT_RT issues with nf_dup infrastructure
and nft_inner to match in inner headers, from Sebastian Andrzej Siewior.
6) Integrate conntrack information into nft trace infrastructure,
from Florian Westphal.
7) A series of 13 patches to allow to specify wildcard netdevice in
netdev basechain and flowtables, eg.
table netdev filter {
chain ingress {
type filter hook ingress devices = { eth0, eth1, vlan* } priority 0; policy accept;
}
}
This also allows for runtime hook registration on NETDEV_{UN}REGISTER
event, from Phil Sutter.
netfilter pull request 25-05-23
* tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: (26 commits)
selftests: netfilter: Torture nftables netdev hooks
netfilter: nf_tables: Add notifications for hook changes
netfilter: nf_tables: Support wildcard netdev hook specs
netfilter: nf_tables: Sort labels in nft_netdev_hook_alloc()
netfilter: nf_tables: Handle NETDEV_CHANGENAME events
netfilter: nf_tables: Wrap netdev notifiers
netfilter: nf_tables: Respect NETDEV_REGISTER events
netfilter: nf_tables: Prepare for handling NETDEV_REGISTER events
netfilter: nf_tables: Have a list of nf_hook_ops in nft_hook
netfilter: nf_tables: Pass nf_hook_ops to nft_unregister_flowtable_hook()
netfilter: nf_tables: Introduce nft_register_flowtable_ops()
netfilter: nf_tables: Introduce nft_hook_find_ops{,_rcu}()
netfilter: nf_tables: Introduce functions freeing nft_hook objects
netfilter: nf_tables: add packets conntrack state to debug trace info
netfilter: conntrack: make nf_conntrack_id callable without a module dependency
netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit
netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx
netfilter: nf_dup{4, 6}: Move duplication check to task_struct
netfilter: nft_tunnel: fix geneve_opt dump
selftests: netfilter: nft_fib.sh: add type and oif tests with and without VRFs
...
====================
Link: https://patch.msgid.link/20250523132712.458507-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nf_skb_duplicated is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Due to the recursion involved, the simplest change is to make it a
per-task variable.
Move the per-CPU variable nf_skb_duplicated to task_struct and name it
in_nf_duplicate. Add it to the existing bitfield so it doesn't use
additional memory.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
fib has two modes:
1. Obtain output device according to source or destination address
2. Obtain the type of the address, e.g. local, unicast, multicast.
'fib daddr type' should return 'local' if the address is configured
in this netns or unicast otherwise.
'fib daddr . iif type' should return 'local' if the address is configured
on the input interface or unicast otherwise, i.e. more restrictive.
However, if the interface is part of a VRF, then 'fib daddr type'
returns unicast even if the address is configured on the incoming
interface.
This is broken for both ipv4 and ipv6.
In the ipv4 case, inet_dev_addr_type must only be used if the
'iif' or 'oif' (strict mode) was requested.
Else inet_addr_type_dev_table() needs to be used and the correct
dev argument must be passed as well so the correct fib (vrf) table
is used.
In the ipv6 case, the bug is similar, without strict mode, dev is NULL
so .flowi6_l3mdev will be set to 0.
Add a new 'nft_fib_l3mdev_master_ifindex_rcu()' helper and use that
to init the .l3mdev structure member.
For ipv6, use it from nft_fib6_flowi_init() which gets called from
both the 'type' and the 'route' mode eval functions.
This provides consistent behaviour for all modes for both ipv4 and ipv6:
If strict matching is requested, the input respectively output device
of the netfilter hooks is used.
Otherwise, use skb->dev to obtain the l3mdev ifindex.
Without this, most type checks in updated nft_fib.sh selftest fail:
FAIL: did not find veth0 . 10.9.9.1 . local in fibtype4
FAIL: did not find veth0 . dead:1::1 . local in fibtype6
FAIL: did not find veth0 . dead:9::1 . local in fibtype6
FAIL: did not find tvrf . 10.0.1.1 . local in fibtype4
FAIL: did not find tvrf . 10.9.9.1 . local in fibtype4
FAIL: did not find tvrf . dead:1::1 . local in fibtype6
FAIL: did not find tvrf . dead:9::1 . local in fibtype6
FAIL: fib expression address types match (iif in vrf)
(fib errounously returns 'unicast' for all of them, even
though all of these addresses are local to the vrf).
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With a VRF, ipv4 and ipv6 FIB expression behave differently.
fib daddr . iif oif
Will return the input interface name for ipv4, but the real device
for ipv6. Example:
If VRF device name is tvrf and real (incoming) device is veth0.
First round is ok, both ipv4 and ipv6 will yield 'veth0'.
But in the second round (incoming device will be set to "tvrf"), ipv4
will yield "tvrf" whereas ipv6 returns "veth0" for the second round too.
This makes ipv6 behave like ipv4.
A followup patch will add a test case for this, without this change
it will fail with:
get element inet t fibif6iif { tvrf . dead:1::99 . tvrf }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FAIL: did not find tvrf . dead:1::99 . tvrf in fibif6iif
Alternatively we could either not do anything at all or change
ipv4 to also return the lower/real device, however, nft (userspace)
doc says "iif: if fib lookup provides a route then check its output
interface is identical to the packets input interface." which is what
the nft fib ipv4 behaviour is.
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=bgyq
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-05-21
1) Fix some missing kfree_skb in the error paths of espintcp.
From Sabrina Dubroca.
2) Fix a reference leak in espintcp.
From Sabrina Dubroca.
3) Fix UDP GRO handling for ESPINUDP.
From Tobias Brunner.
4) Fix ipcomp truesize computation on the receive path.
From Sabrina Dubroca.
5) Sanitize marks before policy/state insertation.
From Paul Chaignon.
* tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Sanitize marks before insert
xfrm: ipcomp: fix truesize computation on receive
xfrm: Fix UDP GRO handling for some corner cases
espintcp: remove encap socket caching to avoid reference leak
espintcp: fix skb leaks
====================
Link: https://patch.msgid.link/20250521054348.4057269-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These two commits preallocated two per-cpu variables in
ip6_route_info_create() as fib_nh_common_init() and fib6_nh_init()
were expected to be called under RCU.
* commit d27b9c40db ("ipv6: Preallocate nhc_pcpu_rth_output in
ip6_route_info_create().")
* commit 5720a328c3 ("ipv6: Preallocate rt->fib6_nh->rt6i_pcpu in
ip6_route_info_create().")
Now these functions can be called without RCU and can use GFP_KERNEL.
Let's revert the commits.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit c4837b9853 ("ipv6: Split ip6_route_info_create()."),
ip6_route_info_create_nh() uses GFP_ATOMIC as it was expected to be
called under RCU.
Now, we can call it without RCU and use GFP_KERNEL.
Let's pass gfp_flags to ip6_route_info_create_nh().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 71c0efb6d1 ("ipv6: Factorise ip6_route_multipath_add().") split
a loop in ip6_route_multipath_add() so that we can put rcu_read_lock()
between ip6_route_info_create() and ip6_route_info_create_nh().
We no longer need to do so as ip6_route_info_create_nh() does not require
RCU now.
Let's revert the commit to simplify the code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch fixed the same issue mentioned in
commit 14a0087e72 ("ipv6: sr: switch to GFP_ATOMIC
flag to allocate memory during seg6local LWT setup").
Let's revert it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250516022759.44392-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 169fd62799 ("ipv6: Get rid of RTNL for SIOCADDRT and
RTM_NEWROUTE.") added rcu_read_lock() covering
ip6_route_info_create_nh() and __ip6_ins_rt() to guarantee that
nexthop and netdev will not go away.
However, as reported by syzkaller [0], ip_tun_build_state() calls
dst_cache_init() with GFP_KERNEL during the RCU critical section.
ip6_route_info_create_nh() fetches nexthop or netdev depending on
whether RTA_NH_ID is set, and struct fib6_info holds a refcount
of either of them by nexthop_get() or netdev_get_by_index().
netdev_get_by_index() looks up a dev and calls dev_hold() under RCU.
So, we need RCU only around nexthop_find_by_id() and nexthop_get()
( and a few more nexthop code).
Let's add rcu_read_lock() there and remove rcu_read_lock() in
ip6_route_add() and ip6_route_multipath_add().
Now these functions called from fib6_add() need RCU:
- inet6_rt_notify()
- fib6_drop_pcpu_from() (via fib6_purge_rt())
- rt6_flush_exceptions() (via fib6_purge_rt())
- ip6_ignore_linkdown() (via rt6_multipath_rebalance())
All callers of inet6_rt_notify() need RCU, so rcu_read_lock() is
added there.
[0]:
[ BUG: Invalid wait context ]
6.15.0-rc4-syzkaller-00746-g836b313a14a3 #0 Tainted: G W
----------------------------
syz-executor234/5832 is trying to lock:
ffffffff8e021688 (pcpu_alloc_mutex){+.+.}-{4:4}, at:
pcpu_alloc_noprof+0x284/0x16b0 mm/percpu.c:1782
other info that might help us debug this:
context-{5:5}
1 lock held by syz-executor234/5832:
0: ffffffff8df3b860 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire
include/linux/rcupdate.h:331 [inline]
0: ffffffff8df3b860 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock
include/linux/rcupdate.h:841 [inline]
0: ffffffff8df3b860 (rcu_read_lock){....}-{1:3}, at:
ip6_route_add+0x4d/0x2f0 net/ipv6/route.c:3913
stack backtrace:
CPU: 0 UID: 0 PID: 5832 Comm: syz-executor234 Tainted: G W
6.15.0-rc4-syzkaller-00746-g836b313a14a3 #0 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 04/29/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_lock_invalid_wait_context kernel/locking/lockdep.c:4831 [inline]
check_wait_context kernel/locking/lockdep.c:4903 [inline]
__lock_acquire+0xbcf/0xd20 kernel/locking/lockdep.c:5185
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5866
__mutex_lock_common kernel/locking/mutex.c:601 [inline]
__mutex_lock+0x182/0xe80 kernel/locking/mutex.c:746
pcpu_alloc_noprof+0x284/0x16b0 mm/percpu.c:1782
dst_cache_init+0x37/0xc0 net/core/dst_cache.c:145
ip_tun_build_state+0x193/0x6b0 net/ipv4/ip_tunnel_core.c:687
lwtunnel_build_state+0x381/0x4c0 net/core/lwtunnel.c:137
fib_nh_common_init+0x129/0x460 net/ipv4/fib_semantics.c:635
fib6_nh_init+0x15e4/0x2030 net/ipv6/route.c:3669
ip6_route_info_create_nh+0x139/0x870 net/ipv6/route.c:3866
ip6_route_add+0xf6/0x2f0 net/ipv6/route.c:3915
inet6_rtm_newroute+0x284/0x1c50 net/ipv6/route.c:5732
rtnetlink_rcv_msg+0x7cc/0xb70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x758/0x8d0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
____sys_sendmsg+0x505/0x830 net/socket.c:2566
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x19b/0x260 net/socket.c:2655
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94
Fixes: 169fd62799 ("ipv6: Get rid of RTNL for SIOCADDRT and RTM_NEWROUTE.")
Reported-by: syzbot+bcc12d6799364500fbec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bcc12d6799364500fbec
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89i+r1cGacVC_6n3-A-WSkAa_Nr+pmxJ7Gt+oP-P9by2aGw@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f130a0cc1b ("inet: fix lwtunnel_valid_encap_type() lock
imbalance") added the rtnl_is_held argument as a temporary fix while
I'm converting nexthop and IPv6 routing table to per-netns RTNL or RCU.
Now all callers of lwtunnel_valid_encap_type() do not hold RTNL.
Let's remove the argument.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once allocated, the IPv6 routing table is not freed until
netns is dismantled.
fib6_get_table() uses rcu_read_lock() while iterating
net->ipv6.fib_table_hash[], but it's not needed and
rather confusing.
Because some callers have this pattern,
table = fib6_get_table();
rcu_read_lock();
/* ... use table here ... */
rcu_read_unlock();
[ See: addrconf_get_prefix_route(), ip6_route_del(),
rt6_get_route_info(), rt6_get_dflt_router() ]
and this looks illegal but is actually safe.
Let's remove rcu_read_lock() in fib6_get_table() and pass true
to the last argument of hlist_for_each_entry_rcu() to bypass
the RCU check.
Note that protection is not needed but RCU helper is used to
avoid data-race.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250516022759.44392-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hmac_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-5-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Augment dmabuf binding to be able to handle TX. Additional to all the RX
binding, we also create tx_vec needed for the TX path.
Provide API for sendmsg to be able to send dmabufs bound to this device:
- Provide a new dmabuf_tx_cmsg which includes the dmabuf to send from.
- MSG_ZEROCOPY with SCM_DEVMEM_DMABUF cmsg indicates send from dma-buf.
Devmem is uncopyable, so piggyback off the existing MSG_ZEROCOPY
implementation, while disabling instances where MSG_ZEROCOPY falls back
to copying.
We additionally pipe the binding down to the new
zerocopy_fill_skb_from_devmem which fills a TX skb with net_iov netmems
instead of the traditional page netmems.
We also special case skb_frag_dma_map to return the dma-address of these
dmabuf net_iovs instead of attempting to map pages.
The TX path may release the dmabuf in a context where we cannot wait.
This happens when the user unbinds a TX dmabuf while there are still
references to its netmems in the TX path. In that case, the netmems will
be put_netmem'd from a context where we can't unmap the dmabuf, Resolve
this by making __net_devmem_dmabuf_binding_free schedule_work'd.
Based on work by Stanislav Fomichev <sdf@fomichev.me>. A lot of the meat
of the implementation came from devmem TCP RFC v1[1], which included the
TX path, but Stan did all the rebasing on top of netmem/net_iov.
Cc: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-5-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE
devices in most cases and fall back to using add_v4_addrs() only in
case the GRE configuration is incompatible with addrconf_addr_gen().
GRE used to use addrconf_addr_gen() until commit e5dd729460 ("ip/ip6_gre:
use the same logic as SIT interfaces when computing v6LL address")
restricted this use to gretap and ip6gretap devices, and created
add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones.
The original problem came when commit 9af28511be ("addrconf: refuse
isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its
addr parameter was 0. The commit says that this would create an invalid
address, however, I couldn't find any RFC saying that the generated
interface identifier would be wrong. Anyway, since gre over IPv4
devices pass their local tunnel address to __ipv6_isatap_ifid(), that
commit broke their IPv6 link-local address generation when the local
address was unspecified.
Then commit e5dd729460 ("ip/ip6_gre: use the same logic as SIT
interfaces when computing v6LL address") tried to fix that case by
defining add_v4_addrs() and calling it to generate the IPv6 link-local
address instead of using addrconf_addr_gen() (apart for gretap and
ip6gretap devices, which would still use the regular
addrconf_addr_gen(), since they have a MAC address).
That broke several use cases because add_v4_addrs() isn't properly
integrated into the rest of IPv6 Neighbor Discovery code. Several of
these shortcomings have been fixed over time, but add_v4_addrs()
remains broken on several aspects. In particular, it doesn't send any
Router Sollicitations, so the SLAAC process doesn't start until the
interface receives a Router Advertisement. Also, add_v4_addrs() mostly
ignores the address generation mode of the interface
(/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the
IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases.
Fix the situation by using add_v4_addrs() only in the specific scenario
where the normal method would fail. That is, for interfaces that have
all of the following characteristics:
* run over IPv4,
* transport IP packets directly, not Ethernet (that is, not gretap
interfaces),
* tunnel endpoint is INADDR_ANY (that is, 0),
* device address generation mode is EUI64.
In all other cases, revert back to the regular addrconf_addr_gen().
Also, remove the special case for ip6gre interfaces in add_v4_addrs(),
since ip6gre devices now always use addrconf_addr_gen() instead.
Note:
This patch was originally applied as commit 183185a18f ("gre: Fix
IPv6 link-local address generation."). However, it was then reverted
by commit fc486c2d06 ("Revert "gre: Fix IPv6 link-local address
generation."") because it uncovered another bug that ended up
breaking net/forwarding/ip6gre_custom_multipath_hash.sh. That other
bug has now been fixed by commit 4d0ab3a688 ("ipv6: Start path
selection from the first nexthop"). Therefore we can now revive this
GRE patch (no changes since original commit 183185a18f ("gre: Fix
IPv6 link-local address generation.").
Fixes: e5dd729460 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/a88cc5c4811af36007645d610c95102dccb360a6.1746225214.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The config NF_CONNTRACK_BRIDGE will change the bridge forwarding for
fragmented packets.
The original bridge does not know that it is a fragmented packet and
forwards it directly, after NF_CONNTRACK_BRIDGE is enabled, function
nf_br_ip_fragment and br_ip6_fragment will check the headroom.
In original br_forward, insufficient headroom of skb may indeed exist,
but there's still a way to save the skb in the device driver after
dev_queue_xmit.So droping the skb will change the original bridge
forwarding in some cases.
Fixes: 3c171f496e ("netfilter: bridge: add connection tracking system")
Signed-off-by: Huajian Yang <huajianyang@asrmicro.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Load balance new TCP connections across nexthops also when they
connect to the same service at a single remote address and port.
This affects only port-based multipath hashing:
fib_multipath_hash_policy 1 or 3.
Local connections must choose both a source address and port when
connecting to a remote service, in ip_route_connect. This
"chicken-and-egg problem" (commit 2d7192d6cb ("ipv4: Sanitize and
simplify ip_route_{connect,newports}()")) is resolved by first
selecting a source address, by looking up a route using the zero
wildcard source port and address.
As a result multiple connections to the same destination address and
port have no entropy in fib_multipath_hash.
This is not a problem when forwarding, as skb-based hashing has a
4-tuple. Nor when establishing UDP connections, as autobind there
selects a port before reaching ip_route_connect.
Load balance also TCP, by using a random port in fib_multipath_hash.
Port assignment in inet_hash_connect is not atomic with
ip_route_connect. Thus ports are unpredictable, effectively random.
Implementation details:
Do not actually pass a random fl4_sport, as that affects not only
hashing, but routing more broadly, and can match a source port based
policy route, which existing wildcard port 0 will not. Instead,
define a new wildcard flowi flag that is used only for hashing.
Selecting a random source is equivalent to just selecting a random
hash entirely. But for code clarity, follow the normal 4-tuple hash
process and only update this field.
fib_multipath_hash can be reached with zero sport from other code
paths, so explicitly pass this flowi flag, rather than trying to infer
this case in the function itself.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now we are ready to remove RTNL from SIOCADDRT and RTM_NEWROUTE.
The remaining things to do are
1. pass false to lwtunnel_valid_encap_type_attr()
2. use rcu_dereference_rtnl() in fib6_check_nexthop()
3. place rcu_read_lock() before ip6_route_info_create_nh().
Let's complete the RTNL-free conversion.
When each CPU-X adds 100000 routes on table-X in a batch
concurrently on c7a.metal-48xl EC2 instance with 192 CPUs,
without this series:
$ sudo ./route_test.sh
...
added 19200000 routes (100000 routes * 192 tables).
time elapsed: 191577 milliseconds.
with this series:
$ sudo ./route_test.sh
...
added 19200000 routes (100000 routes * 192 tables).
time elapsed: 62854 milliseconds.
I changed the number of routes in each table (1000 ~ 100000)
and consistently saw it finish 3x faster with this series.
Note that now every caller of lwtunnel_valid_encap_type() passes
false as the last argument, and this can be removed later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-16-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
Then, we may be going to add a route tied to a dying nexthop.
The nexthop itself is not freed during the RCU grace period, but
if we link a route after __remove_nexthop_fib() is called for the
nexthop, the route will be leaked.
To avoid the race between IPv6 route addition under RCU vs nexthop
deletion under RTNL, let's add a dead flag and protect it and
nh->f6i_list with a spinlock.
__remove_nexthop_fib() acquires the nexthop's spinlock and sets false
to nh->dead, then calls ip6_del_rt() for the linked route one by one
without the spinlock because fib6_purge_rt() acquires it later.
While adding an IPv6 route, fib6_add() acquires the nexthop lock and
checks the dead flag just before inserting the route.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-15-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The next patch adds per-nexthop spinlock which protects nh->f6i_list.
When rt->nh is not NULL, fib6_add_rt2node() will be called under the lock.
fib6_add_rt2node() could call fib6_purge_rt() for another route, which
could holds another nexthop lock.
Then, deadlock could happen between two nexthops.
Let's defer fib6_purge_rt() after fib6_add_rt2node().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-14-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
If the request specifies a new table ID, fib6_new_table() is
called to create a new routing table.
Two concurrent requests could specify the same table ID, so we
need a lock to protect net->ipv6.fib_table_hash[h].
Let's add a spinlock to protect the hash bucket linkage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-13-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT and rely
on RCU to guarantee dev and nexthop lifetime.
Then, the RCU section will start before ip6_route_info_create_nh()
in ip6_route_multipath_add(), but ip6_route_info_create() is called
in the same loop and will sleep.
Let's split the loop into ip6_route_mpath_info_create() and
ip6_route_mpath_info_create_nh().
Note that ip6_route_info_append() is now integrated into
ip6_route_mpath_info_create_nh() because we need to call different
free functions for nexthops that passed ip6_route_info_create_nh().
In case of failure, the remaining nexthops that ip6_route_info_create_nh()
has not been called for will be freed by ip6_route_mpath_info_cleanup().
OTOH, if a nexthop passes ip6_route_info_create_nh(), it will be linked
to a local temporary list, which will be spliced back to rt6_nh_list.
In case of failure, these nexthops will be released by fib6_info_release()
in ip6_route_multipath_add().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-12-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net is not used in ip6_route_info_append() after commit 36f19d5b4f
("net/ipv6: Remove extra call to ip6_convert_metrics for multipath case").
Let's remove the argument.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-10-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip6_route_info_create_nh() will be called under RCU.
It calls fib_nh_common_init() and allocates nhc->nhc_pcpu_rth_output.
As with the reason for rt->fib6_nh->rt6i_pcpu, we want to avoid
GFP_ATOMIC allocation for nhc->nhc_pcpu_rth_output under RCU.
Let's preallocate it in ip6_route_info_create().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-9-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip6_route_info_create_nh() will be called under RCU.
Then, fib6_nh_init() is also under RCU, but per-cpu memory allocation
is very likely to fail with GFP_ATOMIC while bulk-adding IPv6 routes
and we would see a bunch of this message in dmesg.
percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left
percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left
Let's preallocate rt->fib6_nh->rt6i_pcpu in ip6_route_info_create().
If something fails before the original memory allocation in
fib6_nh_init(), ip6_route_info_create_nh() calls fib6_info_release(),
which releases the preallocated per-cpu memory.
Note that rt->fib6_nh->rt6i_pcpu is not preallocated when called via
ipv6_stub, so we still need alloc_percpu_gfp() in fib6_nh_init().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-8-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT and rely
on RCU to guarantee dev and nexthop lifetime.
Then, we want to allocate as much as possible before entering
the RCU section.
The RCU section will start in the middle of ip6_route_info_create(),
and this is problematic for ip6_route_multipath_add() that calls
ip6_route_info_create() multiple times.
Let's split ip6_route_info_create() into two parts; one for memory
allocation and another for nexthop setup.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-7-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
Then, we must perform two lookups for nexthop and dev under RCU
to guarantee their lifetime.
ip6_route_info_create() calls nexthop_find_by_id() first if
RTA_NH_ID is specified, and then allocates struct fib6_info.
nexthop_find_by_id() must be called under RCU, but we do not want
to use GFP_ATOMIC for memory allocation here, which will be likely
to fail in ip6_route_multipath_add().
Let's move nexthop_find_by_id() after the memory allocation so
that we can later split ip6_route_info_create() into two parts:
the sleepable part and the RCU part.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-6-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ip6_route_multipath_add(), we call rt6_qualify_for_ecmp() for each
entry. If it returns false, the request fails.
rt6_qualify_for_ecmp() returns false if either of the conditions below
is true:
1. f6i->fib6_flags has RTF_ADDRCONF
2. f6i->nh is not NULL
3. f6i->fib6_nh->fib_nh_gw_family is AF_UNSPEC
1 is unnecessary because rtm_to_fib6_config() never sets RTF_ADDRCONF
to cfg->fc_flags.
2. is equivalent with cfg->fc_nh_id.
3. can be replaced by checking RTF_GATEWAY in the base and each multipath
entry because AF_INET6 is set to f6i->fib6_nh->fib_nh_gw_family only when
cfg.fc_is_fdb is true or RTF_GATEWAY is set, but the former is always
false.
These checks do not require RCU and can be done earlier.
Let's perform the equivalent checks in rtm_to_fib6_multipath_config().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-5-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip6_route_info_create() is called from 3 functions:
* ip6_route_add()
* ip6_route_multipath_add()
* addrconf_f6i_alloc()
addrconf_f6i_alloc() does not need validation for struct fib6_config in
ip6_route_info_create().
ip6_route_multipath_add() calls ip6_route_info_create() for multiple
routes with slightly different fib6_config instances, which is copied
from the base config passed from userspace. So, we need not validate
the same config repeatedly.
Let's move such validation into rtm_to_fib6_config().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-4-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Basically, removing an IPv6 route does not require RTNL because
the IPv6 routing tables are protected by per table lock.
inet6_rtm_delroute() calls nexthop_find_by_id() to check if the
nexthop specified by RTA_NH_ID exists. nexthop uses rbtree and
the top-down walk can be safely performed under RCU.
ip6_route_del() already relies on RCU and the table lock, but we
need to extend the RCU critical section a bit more to cover
__ip6_del_rt(). For example, nexthop_for_each_fib6_nh() and
inet6_rt_notify() needs RCU.
Let's call nexthop_find_by_id() and __ip6_del_rt() under RCU and
get rid of RTNL from inet6_rtm_delroute() and SIOCDELRT.
Even if the nexthop is removed after rcu_read_unlock() in
inet6_rtm_delroute(), __remove_nexthop_fib() cleans up the routes
tied to the nexthop, and ip6_route_del() returns -ESRCH. So the
request was at least valid as of nexthop_find_by_id(), and it's just
a matter of timing.
Note that we need to pass false to lwtunnel_valid_encap_type_attr().
The following patches also use the newroute bool.
Note also that fib6_get_table() does not require RCU because once
allocated fib6_table is not freed until netns dismantle. I will
post a follow-up series to convert such callers to RCU-lockless
version. [0]
Link: https://lore.kernel.org/netdev/20250417174557.65721-1-kuniyu@amazon.com/ #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-3-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will perform RTM_NEWROUTE and RTM_DELROUTE under RCU, and then
we want to perform some validation out of the RCU scope.
When creating / removing an IPv6 route with RTA_MULTIPATH,
inet6_rtm_newroute() / inet6_rtm_delroute() validates RTA_GATEWAY
in each multipath entry.
Let's do that in rtm_to_fib6_config().
Note that now RTM_DELROUTE returns an error for RTA_MULTIPATH with
0 entries, which was accepted but should result in -EINVAL as
RTM_NEWROUTE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418000443.43734-2-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the dst_entry is the same post transformation (which is a valid use
case for IOAM), we don't add it to the cache to avoid a reference loop.
Instead, we use a "fake" dst_entry and add it to the cache as a signal.
When we read the cache, we compare it with our "fake" dst_entry and
therefore detect if we're in the special case.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250415112554.23823-3-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Be consistent and use the same terminology as other lwt users: orig_dst
is the dst_entry before the transformation, while dst is either the
dst_entry in the cache or the dst_entry after the transformation
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250415112554.23823-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With this change ovpn is allowed to communicate to peers also via TCP.
Parsing of incoming messages is implemented through the strparser API.
Note that ovpn redefines sk_prot and sk_socket->ops for the TCP socket
used to communicate with the peer.
For this reason it needs to access inet6_stream_ops, which is declared
as extern in the IPv6 module, but it is not fully exported.
Therefore this patch is also adding EXPORT_SYMBOL_GPL(inet6_stream_ops)
to net/ipv6/af_inet6.c.
Cc: David Ahern <dsahern@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-11-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This fixes an issue that's caused if there is a mismatch between the data
offset in the GRO header and the length fields in the regular sk_buff due
to the pskb_pull()/skb_push() calls. That's because the UDP GRO layer
stripped off the UDP header via skb_gro_pull() already while the UDP
header was explicitly not pulled/pushed in this function.
For example, an IKE packet that triggered this had len=data_len=1268 and
the data_offset in the GRO header was 28 (IPv4 + UDP). So pskb_pull()
was called with an offset of 28-8=20, which reduced len to 1248 and via
pskb_may_pull() and __pskb_pull_tail() it also set data_len to 1248.
As the ESP offload module was not loaded, the function bailed out and
called skb_push(), which restored len to 1268, however, data_len remained
at 1248.
So while skb_headlen() was 0 before, it was now 20. The latter caused a
difference of 8 instead of 28 (or 0 if pskb_pull()/skb_push() was called
with the complete GRO data_offset) in gro_try_pull_from_frag0() that
triggered a call to gro_pull_from_frag0() that corrupted the packet.
This change uses a more GRO-like approach seen in other GRO receivers
via skb_gro_header() to just read the actual data we are interested in
and does not try to "restore" the UDP header at this point to call the
existing function. If the offload module is not loaded, it immediately
bails out, otherwise, it only does a quick check to see if the packet
is an IKE or keepalive packet instead of calling the existing function.
Fixes: 172bf009c1 ("xfrm: Support GRO for IPv4 ESP in UDP encapsulation")
Fixes: 221ddb723d ("xfrm: Support GRO for IPv6 ESP in UDP encapsulation")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250415-nlmsg_v2-v1-3-a1c75d493fd7@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250415-nlmsg_v2-v1-2-a1c75d493fd7@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
This changes function ip6addrlbl_valid_get_req() and
ip6addrlbl_valid_dump_req().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250415-nlmsg_v2-v1-1-a1c75d493fd7@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-7-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-6-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following functions iterates the dying netns list and performs
the same operations for each netns.
* ip6gre_exit_batch_rtnl()
* ip6_tnl_exit_batch_rtnl()
* vti6_exit_batch_rtnl()
* sit_exit_batch_rtnl()
Let's use ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
DCCP was removed, so many inet functions no longer need to
be exported.
Let's unexport or use EXPORT_IPV6_MOD() for such functions.
sk_free_unlock_clone() is inlined in sk_clone_lock() as it's
the only caller.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250410023921.11307-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was orphaned in 2021 by commit 054c4610bd ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.
In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot. Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.
Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46 ("dccp: Print deprecation notice.").
Since then, only one individual has contacted the netdev mailing list. [0]
There is ongoing research for Multipath DCCP. The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community. While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:
"This is not Open Source software."
The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.
Maintaining DCCP for a decade without any real users has become a burden.
Therefore, it's time to remove it.
Removing DCCP will also provide significant benefits to TCP. It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.
Note that we keep DCCP netfilter modules as requested. [3]
Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list
of routes.") introduced a separated list for managing route expiration via
the GC timer.
However, it missed adding exception routes (created by ip6_rt_update_pmtu()
and rt6_do_redirect()) to this GC list. As a result, these exceptions were
never considered for expiration and removal, leading to stale entries
persisting in the routing table.
This patch fixes the issue by calling fib6_add_gc_list() in
rt6_insert_exception(), ensuring that exception routes are properly tracked
and garbage collected when expired.
Fixes: 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list of routes.")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/837e7506ffb63f47faa2b05d9b85481aad28e1a4.1744134377.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devices in the networking path, such as firewalls, NATs, or routers, which
can perform SNAT or DNAT, use addresses from their own limited address
pools to masquerade the source address during forwarding, causing PAWS
verification to fail more easily.
Currently, packet loss statistics for PAWS can only be viewed through MIB,
which is a global metric and cannot be precisely obtained through tracing
to get the specific 4-tuple of the dropped packet. In the past, we had to
use kprobe ret to retrieve relevant skb information from
tcp_timewait_state_process().
We add a drop_reason pointer, similar to what previous commit does:
commit e34100c2ec ("tcp: add a drop_reason pointer to tcp_check_req()")
This commit addresses the PAWSESTABREJECTED case and also sets the
corresponding drop reason.
We use 'pwru' to test.
Before this commit:
''''
./pwru 'port 9999'
2025/04/07 13:40:19 Listening for events..
TUPLE FUNC
172.31.75.115:12345->172.31.75.114:9999(tcp) sk_skb_reason_drop(SKB_DROP_REASON_NOT_SPECIFIED)
'''
After this commit:
'''
./pwru 'port 9999'
2025/04/07 13:51:34 Listening for events..
TUPLE FUNC
172.31.75.115:12345->172.31.75.114:9999(tcp) sk_skb_reason_drop(SKB_DROP_REASON_TCP_RFC7323_TW_PAWS)
'''
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250409112614.16153-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink().
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr().
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wkGz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
A nexthop is only chosen when the calculated multipath hash falls in the
nexthop's hash region (i.e., the hash is smaller than the nexthop's hash
threshold) and when the nexthop is assigned a non-negative score by
rt6_score_route().
Commit 4d0ab3a688 ("ipv6: Start path selection from the first
nexthop") introduced an unintentional difference between the first
nexthop and the rest when the score is negative.
When the first nexthop matches, but has a negative score, the code will
currently evaluate subsequent nexthops until one is found with a
non-negative score. On the other hand, when a different nexthop matches,
but has a negative score, the code will fallback to the nexthop with
which the selection started ('match').
Align the behavior across all nexthops and fallback to 'match' when the
first nexthop matches, but has a negative score.
Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Fixes: 4d0ab3a688 ("ipv6: Start path selection from the first nexthop")
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Restrict the optimization to kernel sockets only: it covers all the
relevant use-cases, and user-space owned sockets could be disconnected
and rebound after setup_udp_tunnel_sock(), breaking the uniqueness
assumption
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/41d16bc8d1257d567f9344c445b4ae0b4a91ede4.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nexthops whose link is down are not supposed to be considered during
path selection when the "ignore_routes_with_linkdown" sysctl is set.
This is done by assigning them a negative region boundary.
However, when comparing the computed hash (unsigned) with the region
boundary (signed), the negative region boundary is treated as unsigned,
resulting in incorrect nexthop selection.
Fix by treating the computed hash as signed. Note that the computed hash
is always in range of [0, 2^31 - 1].
Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250402114224.293392-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit transitioned IPv6 path selection to use hash-threshold
instead of modulo-N. With hash-threshold, each nexthop is assigned a
region boundary in the multipath hash function's output space and a
nexthop is chosen if the calculated hash is smaller than the nexthop's
region boundary.
Hash-threshold does not work correctly if path selection does not start
with the first nexthop. For example, if fib6_select_path() is always
passed the last nexthop in the group, then it will always be chosen
because its region boundary covers the entire hash function's output
space.
Fix this by starting the selection process from the first nexthop and do
not consider nexthops for which rt6_score_route() provided a negative
score.
Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Reported-by: Stanislav Fomichev <stfomichev@gmail.com>
Closes: https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250402114224.293392-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_add_dev might call dev_disable_lro which unconditionally grabs
instance lock, so it will deadlock during NETDEV_REGISTER. Switch
to netif_disable_lro.
Make sure all callers hold the instance lock as well.
Cc: Cosmin Ratiu <cratiu@nvidia.com>
Fixes: ad7c7b2172 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTEXT_FILTER_SKIP_STATS is incorrectly skipping non-stats IPv6
netlink attributes on link dump. This causes issues on userspace tools,
e.g iproute2 is not rendering address generation mode as it should due
to missing netlink attribute.
Move the filling of IFLA_INET6_STATS and IFLA_INET6_ICMP6STATS to a
helper function guarded by a flag check to avoid hitting the same
situation in the future.
Fixes: d5566fd72e ("rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402121751.3108-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calling netlbl_conn_setattr(), addr->sa_family is used
to determine the function behavior. If sk is an IPv4 socket,
but the connect function is called with an IPv6 address,
the function calipso_sock_setattr() is triggered.
Inside this function, the following code is executed:
sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL;
Since sk is an IPv4 socket, pinet6 is NULL, leading to a
null pointer dereference.
This patch fixes the issue by checking if inet6_sk(sk)
returns a NULL pointer before accessing pinet6.
Signed-off-by: Debin Zhu <mowenroot@163.com>
Signed-off-by: Bitao Ouyang <1985755126@qq.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Fixes: ceba1832b1 ("calipso: Set the calipso socket label to match the secattr.")
Link: https://patch.msgid.link/20250401124018.4763-1-mowenroot@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icsk->icsk_timeout can be replaced by icsk->icsk_retransmit_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert "udp_tunnel: use static call for GRO hooks when possible"
This reverts commit 311b36574c.
Revert "udp_tunnel: create a fastpath GRO lookup."
This reverts commit 8d4880db37.
There are multiple small issues with the series. In the interest
of unblocking the merge window let's opt for a revert.
Link: https://lore.kernel.org/cover.1742557254.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=b5n2
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Use kvmalloc in xt_hashlimit, from Denis Kirjanov.
2) Tighten nf_conntrack sysctl accepted values for nf_conntrack_max
and nf_ct_expect_max, from Nicolas Bouchinet.
3) Avoid lookup in nft_fib if socket is available, from Florian Westphal.
4) Initialize struct lsm_context in nfnetlink_queue to avoid
hypothetical ENOMEM errors, Chenyuan Yang.
5) Use strscpy() instead of _pad when initializing xtables table name,
kzalloc is already used to initialized the table memory area.
From Thorsten Blum.
6) Missing socket lookup by conntrack information for IPv6 traffic
in nft_socket, there is a similar chunk in IPv4, this was never
added when IPv6 NAT was introduced. From Maxim Mikityanskiy.
7) Fix clang issues with nf_tables CONFIG_MITIGATION_RETPOLINE,
from WangYuli.
* tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: Only use nf_skip_indirect_calls() when MITIGATION_RETPOLINE
netfilter: socket: Lookup orig tuple for IPv6 SNAT
netfilter: xtables: Use strscpy() instead of strscpy_pad()
netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error
netfilter: fib: avoid lookup if socket is available
netfilter: conntrack: Bound nf_conntrack sysctl writes
netfilter: xt_hashlimit: replace vmalloc calls with kvmalloc
====================
Link: https://patch.msgid.link/20250323100922.59983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_connection_sock_af_ops.addr2sockaddr() hasn't been used at all
in the git era.
$ git grep addr2sockaddr $(git rev-list HEAD | tail -n 1)
Let's remove it.
Note that there was a 4 bytes hole after sockaddr_len and now it's
6 bytes, so the binary layout is not changed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250318060112.3729-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to
restore the original 5-tuple in case of SNAT, to be able to find the
right socket (if any). Then socket_match() can correctly check whether
the socket was transparent.
However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this
conntrack lookup, making xt_socket fail to match on the socket when the
packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6.
IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as
pods' addresses are in the fd00::/8 ULA subnet and need to be replaced
with the node's external address. Cilium leverages Envoy to enforce L7
policies, and Envoy uses transparent sockets. Cilium inserts an iptables
prerouting rule that matches on `-m socket --transparent` and redirects
the packets to localhost, but it fails to match SNATed IPv6 packets due
to that missing conntrack lookup.
Closes: https://github.com/cilium/cilium/issues/37932
Fixes: eb31628e37 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In case the fib match is used from the input hook we can avoid the fib
lookup if early demux assigned a socket for us: check that the input
interface matches sk-cached one.
Rework the existing 'lo bypass' logic to first check sk, then
for loopback interface type to elide the fib lookup.
This speeds up fib matching a little, before:
93.08 GBit/s (no rules at all)
75.1 GBit/s ("fib saddr . iif oif missing drop" in prerouting)
75.62 GBit/s ("fib saddr . iif oif missing drop" in input)
After:
92.48 GBit/s (no rules at all)
75.62 GBit/s (fib rule in prerouting)
90.37 GBit/s (fib rule in input).
Numbers for the 'no rules' and 'prerouting' are expected to
closely match in-between runs, the 3rd/input test case exercises the
the 'avoid lookup if cached ifindex in sk matches' case.
Test used iperf3 via veth interface, lo can't be used due to existing
loopback test.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad7 ("selftest: net: add proc_net_pktgen")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711ac ("selftests: net: Add test cases for link and peer netns")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429e ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix the lwtunnel_output() reentry loop in ioam6_iptunnel when the
destination is the same after transformation. Note that a check on the
destination address was already performed, but it was not enough. This
is the example of a lwtunnel user taking care of loops without relying
only on the last resort detection offered by lwtunnel.
Fixes: 8cb3bf8bff ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-3-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As mentioned in commit 648700f76b ("inet: frags:
use rhashtables for reassembly units"):
A followup patch will even remove the refcount hold/release
left from prior implementation and save a couple of atomic
operations.
This patch implements this idea, seven years later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250312082250.1803501-5-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the following patch, we no longer assume inet_frag_kill()
callers own a reference.
Consuming two refcounts from inet_frag_kill() would lead in UAF.
Propagate the pointer to the refs that will be consumed later
by the final inet_frag_putn() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
inet_frag_putn() can release multiple references
in one step.
Use it in inet_frags_free_cb().
Replace inet_frag_put(X) with inet_frag_putn(X, 1)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While creating a new IPv6, we could get a weird -ENOMEM when
RTA_NH_ID is set and either of the conditions below is true:
1) CONFIG_IPV6_SUBTREES is enabled and rtm_src_len is specified
2) nexthop_get() fails
e.g.)
# strace ip -6 route add fe80::dead:beef:dead:beef nhid 1 from ::
recvmsg(3, {msg_iov=[{iov_base=[...[
{error=-ENOMEM, msg=[... [...]]},
[{nla_len=49, nla_type=NLMSGERR_ATTR_MSG}, "Nexthops can not be used with so"...]
]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
Let's set err explicitly after ip_fib_metrics_init() in
ip6_route_info_create().
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250312013854.61125-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything
when it fails.
Commit 7dd73168e2 ("ipv6: Always allocate pcpu memory in a fib6_nh")
moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init()
but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in
case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak.
Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the
error path.
Note that we can remove the fib6_nh_release() call in nh_create_ipv6()
later in net-next.git.
Fixes: 7dd73168e2 ("ipv6: Always allocate pcpu memory in a fib6_nh")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312010333.56001-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When updating the source/destination address, the TCP/UDP checksum needs to
be updated as well.
Fixes: bee88cd5bd ("net: add support for segmenting TCP fraglist GSO packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20250311212530.91519-1-nbd@nbd.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/4d5c319c4471161829f50cb8436841de81a5edae.1741718157.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ECN bits in TOS are always cleared when sending in ACKs in TW. Clearing
them is problematic for TCP flows that used Accurate ECN because ECN bits
decide which service queue the packet is placed into (L4S vs Classic).
Effectively, TW ACKs are always downgraded from L4S to Classic queue
which might impact, e.g., delay the ACK will experience on the path
compared with the other packets of the flow.
Change the TW ACK sending code to differentiate:
- In tcp_v4_send_reset(), commit ba9e04a7dd ("ip: fix tos reflection
in ack and reset packets") cleans ECN bits for TW reset and this is
not affected.
- In tcp_v4_timewait_ack(), ECN bits for all TW ACKs are cleaned. But now
only ECN bits of ACKs for oow data or paws_reject are cleaned, and ECN
bits of other ACKs will not be cleaned.
- In tcp_v4_reqsk_send_ack(), commit 66b13d99d9 ("ipv4: tcp: fix TOS
value in ACK messages sent from TIME_WAIT") did not clean ECN bits of
ACKs for oow data or paws_reject. But now the ECN bits rae cleaned for
these ACKs.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With AccECN, there's one additional TCP flag to be used (AE)
and ACE field that overloads the definition of AE, CWR, and
ECE flags. As tcp_flags was previously only 1 byte, the
byte-order stuff needs to be added to it's handling.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE
devices in most cases and fall back to using add_v4_addrs() only in
case the GRE configuration is incompatible with addrconf_addr_gen().
GRE used to use addrconf_addr_gen() until commit e5dd729460
("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL
address") restricted this use to gretap and ip6gretap devices, and
created add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones.
The original problem came when commit 9af28511be ("addrconf: refuse
isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its
addr parameter was 0. The commit says that this would create an invalid
address, however, I couldn't find any RFC saying that the generated
interface identifier would be wrong. Anyway, since gre over IPv4
devices pass their local tunnel address to __ipv6_isatap_ifid(), that
commit broke their IPv6 link-local address generation when the local
address was unspecified.
Then commit e5dd729460 ("ip/ip6_gre: use the same logic as SIT
interfaces when computing v6LL address") tried to fix that case by
defining add_v4_addrs() and calling it to generate the IPv6 link-local
address instead of using addrconf_addr_gen() (apart for gretap and
ip6gretap devices, which would still use the regular
addrconf_addr_gen(), since they have a MAC address).
That broke several use cases because add_v4_addrs() isn't properly
integrated into the rest of IPv6 Neighbor Discovery code. Several of
these shortcomings have been fixed over time, but add_v4_addrs()
remains broken on several aspects. In particular, it doesn't send any
Router Sollicitations, so the SLAAC process doesn't start until the
interface receives a Router Advertisement. Also, add_v4_addrs() mostly
ignores the address generation mode of the interface
(/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the
IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases.
Fix the situation by using add_v4_addrs() only in the specific scenario
where the normal method would fail. That is, for interfaces that have
all of the following characteristics:
* run over IPv4,
* transport IP packets directly, not Ethernet (that is, not gretap
interfaces),
* tunnel endpoint is INADDR_ANY (that is, 0),
* device address generation mode is EUI64.
In all other cases, revert back to the regular addrconf_addr_gen().
Also, remove the special case for ip6gre interfaces in add_v4_addrs(),
since ip6gre devices now always use addrconf_addr_gen() instead.
Fixes: e5dd729460 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/559c32ce5c9976b269e6337ac9abb6a96abe5096.1741375285.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When spanning datagram construction over multiple send calls using
MSG_MORE, per datagram settings are configured on the first send.
That is when ip(6)_setup_cork stores these settings for subsequent use
in __ip(6)_append_data and others.
The only flag that escaped this was dontfrag. As a result, a datagram
could be constructed with df=0 on the first sendmsg, but df=1 on a
next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in
the "diff" scenario.
Changing datagram conditions in the middle of constructing an skb
makes this already complex code path even more convoluted. It is here
unintentional. Bring this flag in line with expected sockopt/cmsg
behavior.
And stop passing ipc6 to __ip6_append_data, to avoid such issues
in the future. This is already the case for __ip_append_data.
inet6_cork had a 6 byte hole, so the 1B flag has no impact.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of the blamed commit ipc6.dontfrag is always initialized at the
start of udpv6_sendmsg, by ipcm6_init_sk, to either 0 or 1.
Later checks against -1 are no longer needed and the branches are now
dead code.
The blamed commit had removed those branches. But I had overlooked
this one case.
UDP has both a lockless fast path and a slower path for corked
requests. This branch remained in the fast path.
Fixes: 096208592b ("ipv6: replace ipcm6_init calls with ipcm6_init_sk")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SKB_DROP_REASON_UDP_CSUM can be used in four locations
when dropping a packet because of a wrong UDP checksum.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250307102002.2095238-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to speedup __inet_hash_connect(), we want to ensure hash values
for <source address, port X, destination address, destination port>
are not randomly spread, but monotonically increasing.
Goal is to allow __inet_hash_connect() to derive the hash value
of a candidate 4-tuple with a single addition in the following
patch in the series.
Given :
hash_0 = inet_ehashfn(saddr, 0, daddr, dport)
hash_sport = inet_ehashfn(saddr, sport, daddr, dport)
Then (hash_sport == hash_0 + sport) for all sport values.
As far as I know, there is no security implication with this change.
After this patch, when __inet_hash_connect() has to try XXXX candidates,
the hash table buckets are contiguous and packed, allowing
a better use of cpu caches and hardware prefetchers.
Tested:
Server: ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog
Client: ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog -c -H server
Before this patch:
utime_start=0.271607
utime_end=3.847111
stime_start=18.407684
stime_end=1997.485557
num_transactions=1350742
latency_min=0.014131929
latency_max=17.895073144
latency_mean=0.505675853
latency_stddev=2.125164772
num_samples=307884
throughput=139866.80
perf top on client:
56.86% [kernel] [k] __inet6_check_established
17.96% [kernel] [k] __inet_hash_connect
13.88% [kernel] [k] inet6_ehashfn
2.52% [kernel] [k] rcu_all_qs
2.01% [kernel] [k] __cond_resched
0.41% [kernel] [k] _raw_spin_lock
After this patch:
utime_start=0.286131
utime_end=4.378886
stime_start=11.952556
stime_end=1991.655533
num_transactions=1446830
latency_min=0.001061085
latency_max=12.075275028
latency_mean=0.376375302
latency_stddev=1.361969596
num_samples=306383
throughput=151866.56
perf top:
50.01% [kernel] [k] __inet6_check_established
20.65% [kernel] [k] __inet_hash_connect
15.81% [kernel] [k] inet6_ehashfn
2.92% [kernel] [k] rcu_all_qs
2.34% [kernel] [k] __cond_resched
0.50% [kernel] [k] _raw_spin_lock
0.34% [kernel] [k] sched_balance_trigger
0.24% [kernel] [k] queued_spin_lock_slowpath
There is indeed an increase of throughput and reduction of latency.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250305034550.879255-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing skb_dst_drop() to drop reference to the old dst before
adding the new dst to the skb.
Fixes: 79ff2fc31e ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch follows commit 92191dd107 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After blamed commit rtm_to_fib_config() now calls
lwtunnel_valid_encap_type{_attr}() without RTNL held,
triggering an unlock balance in __rtnl_unlock,
as reported by syzbot [1]
IPv6 and rtm_to_nh_config() are not yet converted.
Add a temporary @rtnl_is_held parameter to lwtunnel_valid_encap_type()
and lwtunnel_valid_encap_type_attr().
While we are at it replace the two rcu_dereference()
in lwtunnel_valid_encap_type() with more appropriate
rcu_access_pointer().
[1]
syz-executor245/5836 is trying to release lock (rtnl_mutex) at:
[<ffffffff89d0e38c>] __rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor245/5836.
stack backtrace:
CPU: 0 UID: 0 PID: 5836 Comm: syz-executor245 Not tainted 6.14.0-rc4-syzkaller-00873-g3424291dd242 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_unlock_imbalance_bug+0x25b/0x2d0 kernel/locking/lockdep.c:5289
__lock_release kernel/locking/lockdep.c:5518 [inline]
lock_release+0x47e/0xa30 kernel/locking/lockdep.c:5872
__mutex_unlock_slowpath+0xec/0x800 kernel/locking/mutex.c:891
__rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
lwtunnel_valid_encap_type+0x38a/0x5f0 net/core/lwtunnel.c:169
lwtunnel_valid_encap_type_attr+0x113/0x270 net/core/lwtunnel.c:209
rtm_to_fib_config+0x949/0x14e0 net/ipv4/fib_frontend.c:808
inet_rtm_newroute+0xf6/0x2a0 net/ipv4/fib_frontend.c:917
rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6919
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:709 [inline]
Fixes: 1dd2af7963 ("ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.")
Reported-by: syzbot+3f18ef0f7df107a3f6a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c6f87a.050a0220.38b91b.0147.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250304125918.2763514-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When __inet_hash_connect() has to try many 4-tuples before
finding an available one, we see a high spinlock cost from
the many spin_lock_bh(&head->lock) performed in its loop.
This patch adds an RCU lookup to avoid the spinlock cost.
check_established() gets a new @rcu_lookup argument.
First reason is to not make any changes while head->lock
is not held.
Second reason is to not make this RCU lookup a second time
after the spinlock has been acquired.
Tested:
Server:
ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog
Client:
ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog -c -H server
Before series:
utime_start=0.288582
utime_end=1.548707
stime_start=20.637138
stime_end=2002.489845
num_transactions=484453
latency_min=0.156279245
latency_max=20.922042756
latency_mean=1.546521274
latency_stddev=3.936005194
num_samples=312537
throughput=47426.00
perf top on the client:
49.54% [kernel] [k] _raw_spin_lock
25.87% [kernel] [k] _raw_spin_lock_bh
5.97% [kernel] [k] queued_spin_lock_slowpath
5.67% [kernel] [k] __inet_hash_connect
3.53% [kernel] [k] __inet6_check_established
3.48% [kernel] [k] inet6_ehashfn
0.64% [kernel] [k] rcu_all_qs
After this series:
utime_start=0.271607
utime_end=3.847111
stime_start=18.407684
stime_end=1997.485557
num_transactions=1350742
latency_min=0.014131929
latency_max=17.895073144
latency_mean=0.505675853 # Nice reduction of latency metrics
latency_stddev=2.125164772
num_samples=307884
throughput=139866.80 # 190 % increase
perf top on client:
56.86% [kernel] [k] __inet6_check_established
17.96% [kernel] [k] __inet_hash_connect
13.88% [kernel] [k] inet6_ehashfn
2.52% [kernel] [k] rcu_all_qs
2.01% [kernel] [k] __cond_resched
0.41% [kernel] [k] _raw_spin_lock
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250302124237.3913746-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When __inet_hash_connect() has to try many 4-tuples before
finding an available one, we see a high spinlock cost from
__inet_check_established() and/or __inet6_check_established().
This patch adds an RCU lookup to avoid the spinlock
acquisition when the 4-tuple is found in the hash table.
Note that there are still spin_lock_bh() calls in
__inet_hash_connect() to protect inet_bind_hashbucket,
this will be fixed later in this series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250302124237.3913746-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of using sock_kmalloc() to allocate an ip_options and then
immediately duplicate another ip_options to the newly allocated one in
ipv6_dup_options(), mptcp_copy_ip_options() and sctp_v4_copy_ip_options(),
the newly added sock_kmemdup() helper can be used to simplify the code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/91ae749d66600ec6fb679e0e518fda6acb5c3e6f.1740735165.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 8d52da23b6 ("tcp: Defer ts_recent changes
until req is owned"), req->ts_recent is not changed anymore.
It is set once in tcp_openreq_init(), bpf_sk_assign_tcp_reqsk()
or cookie_tcp_reqsk_alloc() before the req can be seen by other
cpus/threads.
This completes the revert of eba20811f3 ("tcp: annotate
data-races around tcp_rsk(req)->ts_recent").
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp4_check_fraglist_gro(), tcp6_check_fraglist_gro(),
udp4_gro_lookup_skb() and udp6_gro_lookup_skb()
assume RCU is held so that the net structure does not disappear.
Use dev_net_rcu() instead of dev_net() to get LOCKDEP support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
