Normally exception packets don't directly output a branch sample, but
if they're the last record in a buffer then they will. Because they
don't have addresses set we'll see the placeholder value
CS_ETM_INVAL_ADDR (0xdeadbeef) in the output.
Since commit 6035b6804b ("perf cs-etm: Support dummy address value for
CS_ETM_TRACE_ON packet") we've used 0 as an externally visible "not set"
address value. For consistency reasons and to not make exceptions look
like an error, change them to use 0 too.
This is particularly visible when doing userspace only tracing because
trace is disabled when jumping to the kernel, causing the flush and then
forcing the last exception packet to be emitted as a branch. With kernel
trace included, there is no flush so exception packets don't generate
samples until the next range packet and they'll pick up the correct
address.
Before:
$ perf record -e cs_etm//u -- stress -i 1 -t 1
$ perf script -F comm,ip,addr,flags
stress syscall ffffb7eedbc0 => deadbeefdeadbeef
stress syscall ffffb7f14a14 => deadbeefdeadbeef
stress syscall ffffb7eedbc0 => deadbeefdeadbeef
After:
stress syscall ffffb7eedbc0 => 0
stress syscall ffffb7f14a14 => 0
stress syscall ffffb7eedbc0 => 0
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: gankulkarni@os.amperecomputing.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240722152756.59453-2-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the "ins.name" is not set while using raw instruction,
'perf annotate' with insn-stat gives wrong data:
Result from "./perf annotate --data-type --insn-stat":
Annotate Instruction stats
total 615, ok 419 (68.1%), bad 196 (31.9%)
Name : Good Bad
-----------------------------------------------------------
: 419 196
This patch sets "dl->ins.name" in arch specific function
"check_ppc_insn" while initialising "struct disasm_line".
Also update "ins_find" function to pass "struct disasm_line" as a
parameter so as to set its name field in arch specific call.
With the patch changes:
Annotate Instruction stats
total 609, ok 446 (73.2%), bad 163 (26.8%)
Name/opcode : Good Bad
-----------------------------------------------------------
58 : 323 80
32 : 49 43
34 : 33 11
OP_31_XOP_LDX : 8 20
40 : 23 0
OP_31_XOP_LWARX : 5 1
OP_31_XOP_LWZX : 2 3
OP_31_XOP_LDARX : 3 0
33 : 0 2
OP_31_XOP_LBZX : 0 1
OP_31_XOP_LWAX : 0 1
OP_31_XOP_LHZX : 0 1
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-16-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf uses the capstone library to disassemble the instructions in
x86. capstone is used (if available) for perf annotate to speed up.
Currently it only supports x86 architecture.
This patch includes changes to enable this in powerpc.
For now, only for data type sort keys, this method is used and only
binary code (raw instruction) is read. This is because powerpc approach
to understand instructions and reg fields uses raw instruction.
The "cs_disasm" is currently not enabled. While attempting to do
cs_disasm, observation is that some of the instructions were not
identified (ex: extswsli, maddld) and it had to fallback to use objdump.
Hence enabling "cs_disasm" is added in comment section as a TODO for
powerpc.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-15-atrajeev@linux.vnet.ibm.com
[ Use dso__nsinfo(dso) as required to match EXTRA_CFLAGS=-DREFCNT_CHECKING=1 build expectations ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
capstone_init is made availbale for all archs to use and updated to
enable support for CS_ARCH_PPC as well. Patch removes
open_capstone_handle and uses capstone_init in all the places.
Committer notes:
Avoid including capstone/capstone.h from print_insn.h to not break the
build in builtin-script.c due to the namespace clash with libbpf:
/usr/include/capstone/bpf.h:94:14: error: 'bpf_insn' defined as wrong kind of tag
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-14-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
symbol__disassemble_capstone in util/disasm.c calls function
open_capstone_handle to open/init the capstone.
We already have a capstone_init function in "util/print_insn.c". But
capstone_init is defined as a static function in util/print_insn.c.
Change this and also add the function in print_insn.h
The open_capstone_handle checks the disassembler_style option from
annotation_options to decide whether to set CS_OPT_SYNTAX_ATT.
Add that logic in capstone_init also and by default set it to true.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-13-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add instruction tracking function "update_insn_state_powerpc" for
powerpc. Example sequence in powerpc:
ld r10,264(r3)
mr r31,r3
<<after some sequence>
ld r9,312(r31)
Consider ithe sample is pointing to: "ld r9,312(r31)".
Here the memory reference is hit at "312(r31)" where 312 is the offset
and r31 is the source register.
Previous instruction sequence shows that register state of r3 is moved
to r31.
So to identify the data type for r31 access, the previous instruction
("mr") needs to be tracked and the state type entry has to be updated.
Current instruction tracking support in perf tools infrastructure is
specific to x86. Patch adds this support for powerpc as well.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-12-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Data-type profiling has the concept of instruction tracking.
Example sequence in powerpc:
ld r10,264(r3)
mr r31,r3
<<after some sequence>
ld r9,312(r31)
or differently
lwz r10,264(r3)
add r31, r3, RB
lwz r9, 0(r31)
If a sample is hit at "lwz r9, 0(r31)", data type of r31 depends
on previous instruction sequence here. So to track the previous
instructions, patch adds changes to identify some of the arithmetic
instructions which are having opcode as 31.
Since memory instructions also has cases with opcode 31, use the bits
22:30 to filter the arithmetic instructions here.
Also there are instructions with just two operands like "addme", "addze".
This patch adds new instructions ops "arithmetic_ops" to handle this
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-10-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are memory instructions in powerpc with opcode as 31.
Example: "ldx RT,RA,RB" , Its X form is as below:
______________________________________
| 31 | RT | RA | RB | 21 |/|
--------------------------------------
0 6 11 16 21 30 31
The opcode for "ldx" is 31. There are other instructions also with
opcode 31 which are memory insn like ldux, stbx, lwzx, lhaux
But all instructions with opcode 31 are not memory. Example is add
instruction: "add RT,RA,RB"
The value in bit 21-30 [ 21 for ldx ] is different for these
instructions. Patch uses this value to assign instruction ops for these
cases. The naming convention and value to identify these are picked from
defines in "arch/powerpc/include/asm/ppc-opcode.h"
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-9-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the raw instruction code and macros to identify memory instructions,
extract register fields and also offset.
The implementation addresses the D-form, X-form, DS-form instructions.
Two main functions are added.
New parse function "load_store__parse" as instruction ops parser for
memory instructions.
Unlike other parsers (like mov__parse), this one fills in the
"multi_regs" field for source/target and new added "mem_ref" field. No
other fields are set because, here there is no need to parse the
disassembled code and arch specific macros will take care of extracting
offset and regs which is easier and will be precise.
In powerpc, all instructions with a primary opcode from 32 to 63
are memory instructions. Update "ins__find" function to have "raw_insn"
also as a parameter.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-8-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the raw instruction code and macros to identify memory instructions,
extract register fields and also offset.
The implementation addresses the D-form, X-form, DS-form instructions.
Adds "mem_ref" field to check whether source/target has memory
reference.
Add function "get_powerpc_regs" which will set these fields: reg1, reg2,
offset depending of where it is source or target ops.
Update "parse" callback for "struct ins_ops" to also pass "struct
disasm_line" as argument. This is needed in parse functions where opcode
is used to determine whether to set multi_regs and other fields
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-7-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to capture and parse raw instruction in powerpc.
Currently, the perf tool infrastructure uses two ways to disassemble
and understand the instruction. One is objdump and other option is
via libcapstone.
Currently, the perf tool infrastructure uses "--no-show-raw-insn" option
with "objdump" while disassemble. Example from powerpc with this option
for an instruction address is:
Snippet from:
objdump --start-address=<address> --stop-address=<address> -d --no-show-raw-insn -C <vmlinux>
c0000000010224b4: lwz r10,0(r9)
This line "lwz r10,0(r9)" is parsed to extract instruction name,
registers names and offset. Also to find whether there is a memory
reference in the operands, "memory_ref_char" field of objdump is used.
For x86, "(" is used as memory_ref_char to tackle instructions of the
form "mov (%rax), %rcx".
In case of powerpc, not all instructions using "(" are the only memory
instructions. Example, above instruction can also be of extended form (X
form) "lwzx r10,0,r19". Inorder to easy identify the instruction category
and extract the source/target registers, patch adds support to use raw
instruction for powerpc. Approach used is to read the raw instruction
directly from the DSO file using "dso__data_read_offset" utility which
is already implemented in perf infrastructure in "util/dso.c".
Example:
38 01 81 e8 ld r4,312(r1)
Here "38 01 81 e8" is the raw instruction representation. In powerpc,
this translates to instruction form: "ld RT,DS(RA)" and binary code
as:
| 58 | RT | RA | DS | |
-------------------------------------
0 6 11 16 30 31
Function "symbol__disassemble_dso" is updated to read raw instruction
directly from DSO using dso__data_read_offset utility. In case of
above example, this captures:
line: 38 01 81 e8
The above works well when 'perf report' is invoked with only sort keys
for data type ie type and typeoff.
Because there is no instruction level annotation needed if only data
type information is requested for.
For annotating sample, along with type and typeoff sort key, "sym" sort
key is also needed. And by default invoking just "perf report" uses sort
key "sym" that displays the symbol information.
With approach changes in powerpc which first reads DSO for raw
instruction, "perf annotate" and "perf report" + a key breaks since
it doesn't do the instruction level disassembly.
Snippet of result from 'perf report':
Samples: 1K of event 'mem-loads', 4000 Hz, Event count (approx.): 937238
do_work /usr/bin/pmlogger [Percent: local period]
Percent│ ea230010
│ 3a550010
│ 3a600000
│ 38f60001
│ 39490008
│ 42400438
51.44 │ 81290008
│ 7d485378
Here, raw instruction is displayed in the output instead of human
readable annotated form.
One way to get the appropriate data is to specify "--objdump path", by
which code annotation will be done. But the default behaviour will be
changed. To fix this breakage, check if "sym" sort key is set. If so
fallback and use the libcapstone/objdump way of disassmbling the sample.
With the changes and "perf report"
Samples: 1K of event 'mem-loads', 4000 Hz, Event count (approx.): 937238
do_work /usr/bin/pmlogger [Percent: local period]
Percent│ ld r17,16(r3)
│ addi r18,r21,16
│ li r19,0
│ 8b0: rldicl r10,r10,63,33
│ addi r10,r10,1
│ mtctr r10
│ ↓ b 8e4
│ 8c0: addi r7,r22,1
│ addi r10,r9,8
│ ↓ bdz d00
51.44 │ lwz r9,8(r9)
│ mr r8,r10
│ cmpw r20,r9
Committer notes:
Just add the extern for 'sort_order' in disasm.c so that we don't end up
breaking the build due to this type colision with capstone and libbpf:
In file included from /usr/include/capstone/capstone.h:325,
from /git/perf-6.10.0/tools/perf/util/print_insn.h:23,
from builtin-script.c:38:
/usr/include/capstone/bpf.h:94:14: error: 'bpf_insn' defined as wrong kind of tag
94 | typedef enum bpf_insn {
I reported this to the bpf mailing list, see one of the links below.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-6-atrajeev@linux.vnet.ibm.com
Link: https://lore.kernel.org/bpf/ZqOltPk9VQGgJZAA@x1/T/#u
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, the perf tool infrastructure uses the disasm_line__parse
function to parse disassembled line.
Example snippet from objdump:
objdump --start-address=<address> --stop-address=<address> -d --no-show-raw-insn -C <vmlinux>
c0000000010224b4: lwz r10,0(r9)
This line "lwz r10,0(r9)" is parsed to extract instruction name,
registers names and offset.
In powerpc, the approach for data type profiling uses raw instruction
instead of result from objdump to identify the instruction category and
extract the source/target registers.
Example: 38 01 81 e8 ld r4,312(r1)
Here "38 01 81 e8" is the raw instruction representation. Add function
"disasm_line__parse_powerpc" to handle parsing of raw instruction.
Also update "struct disasm_line" to save the binary code/
With the change, function captures:
line -> "38 01 81 e8 ld r4,312(r1)"
raw instruction "38 01 81 e8"
Raw instruction is used later to extract the reg/offset fields. Macros
are added to extract opcode and register fields. "struct disasm_line"
is updated to carry union of "bytes" and "raw_insn" of 32 bit to carry raw
code (raw).
Function "disasm_line__parse_powerpc fills the raw instruction hex value
and can use macros to get opcode. There is no changes in existing code
paths, which parses the disassembled code. The size of raw instruction
depends on architecture.
In case of powerpc, the parsing the disasm line needs to handle cases
for reading binary code directly from DSO as well as parsing the objdump
result. Hence adding the logic into separate function instead of
updating "disasm_line__parse". The architecture using the instruction
name and present approach is not altered. Since this approach targets
powerpc, the macro implementation is added for powerpc as of now.
Since the disasm_line__parse is used in other cases (perf annotate) and
not only data tye profiling, the powerpc callback includes changes to
work with binary code as well as mnemonic representation.
Also in case if the DSO read fails and libcapstone is not supported, the
approach fallback to use objdump as option. Hence as option, patch has
changes to ensure objdump option also works well.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-5-atrajeev@linux.vnet.ibm.com
[ Add check for strndup() result ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TYPE_STATE_MAX_REGS is arch-dependent. Currently this is defined to be
16.
While checking if reg is valid using has_reg_type, max value is checked
using TYPE_STATE_MAX_REGS value.
Define this conditionally for powerpc.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add "update_insn_state" callback to "struct arch" to handle instruction
tracking. Currently updating instruction state is handled by static
function "update_insn_state_x86" which is defined in "annotate-data.c".
Make this as a callback for specific arch and move to archs specific
file "arch/x86/annotate/instructions.c" . This will help to add helper
function for other platforms in file:
"arch/<platform>/annotate/instructions.c" and make changes/updates
easier.
Define callback "update_insn_state" as part of "struct arch", also make
some of the debug functions non-static so that it can be referenced from
other places.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Data type profiling uses instruction tracking by checking each
instruction and updating the register type state in some data
structures.
This is useful to find the data type in cases when the register state
gets transferred from one reg to another.
Example, in x86, "mov" instruction and in powerpc, "mr" instruction.
Currently these structures are defined in annotate-data.c and
instruction tracking is implemented only for x86.
Move these data structures to "annotate-data.h" header file so that
other arch implementations can use it in arch specific files as well.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/lkml/20240718084358.72242-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With 0dd5041c9a ("perf addr_location: Add init/exit/copy functions"),
when cpumode is 3 (macro PERF_RECORD_MISC_HYPERVISOR),
thread__find_map() could return with al->maps being NULL.
The path below could add a callchain_cursor_node with NULL ms.maps.
add_callchain_ip()
thread__find_symbol(.., &al)
thread__find_map(.., &al) // al->maps becomes NULL
ms.maps = maps__get(al.maps)
callchain_cursor_append(..., &ms, ...)
node->ms.maps = maps__get(ms->maps)
Then the path below would dereference NULL maps and get segfault.
fill_callchain_info()
maps__machine(node->ms.maps);
Fix it by checking if maps is NULL in fill_callchain_info().
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: yzhong@purestorage.com
Link: https://lore.kernel.org/r/20240722211548.61455-1-cachen@purestorage.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now that symsrc_filename is always accessed through an accessor, we also
need a free() function for it to avoid the following compilation error:
util/unwind-libunwind-local.c:416:12: error: lvalue required as unary
‘&’ operand
416 | zfree(&dso__symsrc_filename(dso));
Fixes: 1553419c3c ("perf dso: Fix address sanitizer build")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240715094715.3914813-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This is a bug found when implementing pretty-printing for the
landlock_add_rule system call, I decided to send this patch separately
because this is a serious bug that should be fixed fast.
I wrote a test program to do landlock_add_rule syscall in a loop,
yet perf trace -e landlock_add_rule freezes, giving no output.
This bug is introduced by the false understanding of the variable "key"
below:
```
for (key = 0; key < trace->sctbl->syscalls.nr_entries; ++key) {
struct syscall *sc = trace__syscall_info(trace, NULL, key);
...
}
```
The code above seems right at the beginning, but when looking at
syscalltbl.c, I found these lines:
```
for (i = 0; i <= syscalltbl_native_max_id; ++i)
if (syscalltbl_native[i])
++nr_entries;
entries = tbl->syscalls.entries = malloc(sizeof(struct syscall) * nr_entries);
...
for (i = 0, j = 0; i <= syscalltbl_native_max_id; ++i) {
if (syscalltbl_native[i]) {
entries[j].name = syscalltbl_native[i];
entries[j].id = i;
++j;
}
}
```
meaning the key is merely an index to traverse the syscall table,
instead of the actual syscall id for this particular syscall.
So if one uses key to do trace__syscall_info(trace, NULL, key), because
key only goes up to trace->sctbl->syscalls.nr_entries, for example, on
my X86_64 machine, this number is 373, it will end up neglecting all
the rest of the syscall, in my case, everything after `rseq`, because
the traversal will stop at 373, and `rseq` is the last syscall whose id
is lower than 373
in tools/perf/arch/x86/include/generated/asm/syscalls_64.c:
```
...
[334] = "rseq",
[424] = "pidfd_send_signal",
...
```
The reason why the key is scrambled but perf trace works well is that
key is used in trace__syscall_info(trace, NULL, key) to do
trace->syscalls.table[id], this makes sure that the struct syscall returned
actually has an id the same value as key, making the later bpf_prog
matching all correct.
After fixing this bug, I can do perf trace on 38 more syscalls, and
because more syscalls are visible, we get 8 more syscalls that can be
augmented.
before:
perf $ perf trace -vv --max-events=1 |& grep Reusing
Reusing "open" BPF sys_enter augmenter for "stat"
Reusing "open" BPF sys_enter augmenter for "lstat"
Reusing "open" BPF sys_enter augmenter for "access"
Reusing "connect" BPF sys_enter augmenter for "accept"
Reusing "sendto" BPF sys_enter augmenter for "recvfrom"
Reusing "connect" BPF sys_enter augmenter for "bind"
Reusing "connect" BPF sys_enter augmenter for "getsockname"
Reusing "connect" BPF sys_enter augmenter for "getpeername"
Reusing "open" BPF sys_enter augmenter for "execve"
Reusing "open" BPF sys_enter augmenter for "truncate"
Reusing "open" BPF sys_enter augmenter for "chdir"
Reusing "open" BPF sys_enter augmenter for "mkdir"
Reusing "open" BPF sys_enter augmenter for "rmdir"
Reusing "open" BPF sys_enter augmenter for "creat"
Reusing "open" BPF sys_enter augmenter for "link"
Reusing "open" BPF sys_enter augmenter for "unlink"
Reusing "open" BPF sys_enter augmenter for "symlink"
Reusing "open" BPF sys_enter augmenter for "readlink"
Reusing "open" BPF sys_enter augmenter for "chmod"
Reusing "open" BPF sys_enter augmenter for "chown"
Reusing "open" BPF sys_enter augmenter for "lchown"
Reusing "open" BPF sys_enter augmenter for "mknod"
Reusing "open" BPF sys_enter augmenter for "statfs"
Reusing "open" BPF sys_enter augmenter for "pivot_root"
Reusing "open" BPF sys_enter augmenter for "chroot"
Reusing "open" BPF sys_enter augmenter for "acct"
Reusing "open" BPF sys_enter augmenter for "swapon"
Reusing "open" BPF sys_enter augmenter for "swapoff"
Reusing "open" BPF sys_enter augmenter for "delete_module"
Reusing "open" BPF sys_enter augmenter for "setxattr"
Reusing "open" BPF sys_enter augmenter for "lsetxattr"
Reusing "openat" BPF sys_enter augmenter for "fsetxattr"
Reusing "open" BPF sys_enter augmenter for "getxattr"
Reusing "open" BPF sys_enter augmenter for "lgetxattr"
Reusing "openat" BPF sys_enter augmenter for "fgetxattr"
Reusing "open" BPF sys_enter augmenter for "listxattr"
Reusing "open" BPF sys_enter augmenter for "llistxattr"
Reusing "open" BPF sys_enter augmenter for "removexattr"
Reusing "open" BPF sys_enter augmenter for "lremovexattr"
Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr"
Reusing "open" BPF sys_enter augmenter for "mq_open"
Reusing "open" BPF sys_enter augmenter for "mq_unlink"
Reusing "fsetxattr" BPF sys_enter augmenter for "add_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "request_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch"
Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat"
Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat"
Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat"
Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat"
Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "linkat"
Reusing "open" BPF sys_enter augmenter for "symlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat"
Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat"
Reusing "connect" BPF sys_enter augmenter for "accept4"
Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at"
Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2"
Reusing "open" BPF sys_enter augmenter for "memfd_create"
Reusing "fremovexattr" BPF sys_enter augmenter for "execveat"
Reusing "fremovexattr" BPF sys_enter augmenter for "statx"
after
perf $ perf trace -vv --max-events=1 |& grep Reusing
Reusing "open" BPF sys_enter augmenter for "stat"
Reusing "open" BPF sys_enter augmenter for "lstat"
Reusing "open" BPF sys_enter augmenter for "access"
Reusing "connect" BPF sys_enter augmenter for "accept"
Reusing "sendto" BPF sys_enter augmenter for "recvfrom"
Reusing "connect" BPF sys_enter augmenter for "bind"
Reusing "connect" BPF sys_enter augmenter for "getsockname"
Reusing "connect" BPF sys_enter augmenter for "getpeername"
Reusing "open" BPF sys_enter augmenter for "execve"
Reusing "open" BPF sys_enter augmenter for "truncate"
Reusing "open" BPF sys_enter augmenter for "chdir"
Reusing "open" BPF sys_enter augmenter for "mkdir"
Reusing "open" BPF sys_enter augmenter for "rmdir"
Reusing "open" BPF sys_enter augmenter for "creat"
Reusing "open" BPF sys_enter augmenter for "link"
Reusing "open" BPF sys_enter augmenter for "unlink"
Reusing "open" BPF sys_enter augmenter for "symlink"
Reusing "open" BPF sys_enter augmenter for "readlink"
Reusing "open" BPF sys_enter augmenter for "chmod"
Reusing "open" BPF sys_enter augmenter for "chown"
Reusing "open" BPF sys_enter augmenter for "lchown"
Reusing "open" BPF sys_enter augmenter for "mknod"
Reusing "open" BPF sys_enter augmenter for "statfs"
Reusing "open" BPF sys_enter augmenter for "pivot_root"
Reusing "open" BPF sys_enter augmenter for "chroot"
Reusing "open" BPF sys_enter augmenter for "acct"
Reusing "open" BPF sys_enter augmenter for "swapon"
Reusing "open" BPF sys_enter augmenter for "swapoff"
Reusing "open" BPF sys_enter augmenter for "delete_module"
Reusing "open" BPF sys_enter augmenter for "setxattr"
Reusing "open" BPF sys_enter augmenter for "lsetxattr"
Reusing "openat" BPF sys_enter augmenter for "fsetxattr"
Reusing "open" BPF sys_enter augmenter for "getxattr"
Reusing "open" BPF sys_enter augmenter for "lgetxattr"
Reusing "openat" BPF sys_enter augmenter for "fgetxattr"
Reusing "open" BPF sys_enter augmenter for "listxattr"
Reusing "open" BPF sys_enter augmenter for "llistxattr"
Reusing "open" BPF sys_enter augmenter for "removexattr"
Reusing "open" BPF sys_enter augmenter for "lremovexattr"
Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr"
Reusing "open" BPF sys_enter augmenter for "mq_open"
Reusing "open" BPF sys_enter augmenter for "mq_unlink"
Reusing "fsetxattr" BPF sys_enter augmenter for "add_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "request_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch"
Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat"
Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat"
Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat"
Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat"
Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "linkat"
Reusing "open" BPF sys_enter augmenter for "symlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat"
Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat"
Reusing "connect" BPF sys_enter augmenter for "accept4"
Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at"
Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2"
Reusing "open" BPF sys_enter augmenter for "memfd_create"
Reusing "fremovexattr" BPF sys_enter augmenter for "execveat"
Reusing "fremovexattr" BPF sys_enter augmenter for "statx"
TL;DR:
These are the new syscalls that can be augmented
Reusing "openat" BPF sys_enter augmenter for "open_tree"
Reusing "openat" BPF sys_enter augmenter for "openat2"
Reusing "openat" BPF sys_enter augmenter for "mount_setattr"
Reusing "openat" BPF sys_enter augmenter for "move_mount"
Reusing "open" BPF sys_enter augmenter for "fsopen"
Reusing "openat" BPF sys_enter augmenter for "fspick"
Reusing "openat" BPF sys_enter augmenter for "faccessat2"
Reusing "openat" BPF sys_enter augmenter for "fchmodat2"
as for the perf trace output:
before
perf $ perf trace -e faccessat2 --max-events=1
[no output]
after
perf $ ./perf trace -e faccessat2 --max-events=1
0.000 ( 0.037 ms): waybar/958 faccessat2(dfd: 40, filename: "uevent") = 0
P.S. The reason why this bug was not found in the past five years is
probably because it only happens to the newer syscalls whose id is
greater, for instance, faccessat2 of id 439, which not a lot of people
care about when using perf trace.
[Arnaldo]: notes
That and the fact that the BPF code was hidden before having to use -e,
that got changed kinda recently when we switched to using BPF skels for
augmenting syscalls in 'perf trace':
⬢[acme@toolbox perf-tools-next]$ git log --oneline tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c
a9f4c6c999 perf trace: Collect sys_nanosleep first argument
29d16de26d perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h
5069211e2f perf trace: Use the right bpf_probe_read(_str) variant for reading user data
33b725ce7b perf trace: Avoid compile error wrt redefining bool
7d9642311b perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(augmented_arg->value) is a power of two.
262b54b6c9 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(saddr) is a power of two.
1836480429 perf bpf_skel augmented_raw_syscalls: Cap the socklen parameter using &= sizeof(saddr)
cd2cece61a perf trace: Tidy comments related to BPF + syscall augmentation
5e6da6be30 perf trace: Migrate BPF augmentation to use a skeleton
⬢[acme@toolbox perf-tools-next]$
⬢[acme@toolbox perf-tools-next]$ git show --oneline --pretty=reference 5e6da6be30 | head -1
5e6da6be30 (perf trace: Migrate BPF augmentation to use a skeleton, 2023-08-10)
⬢[acme@toolbox perf-tools-next]$
I.e. from August, 2023.
One had as well to ask for BUILD_BPF_SKEL=1, which now is default if all
it needs is available on the system.
I simplified the code to not expose the 'struct syscall' outside of
tools/perf/util/syscalltbl.c, instead providing a function to go from
the index to the syscall id:
int syscalltbl__id_at_idx(struct syscalltbl *tbl, int idx);
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/ZmhlAxbVcAKoPTg8@x1
Link: https://lore.kernel.org/r/20240705132059.853205-2-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.
Fixes: ee756ef749 ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It is possible that memory events are not supported on all CPUs.
Prints a warning by dumping the enabled CPU maps in this case.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20240706152035.86983-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
dsos__add would add at the end of the dso array possibly requiring a
later find to re-sort the array. Patterns of find then add were
becoming O(n*log n) due to the sorts. Change the add routine to be
O(n) rather than O(1) but to maintain the sorted-ness of the dsos
array so that later finds don't need the O(n*log n) sort.
Fixes: 3f4ac23a99 ("perf dsos: Switch backing storage to array from rbtree/list")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Steinar Gunderson <sesse@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Link: https://lore.kernel.org/r/20240703172117.810918-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The array is sorted, so just move the elements and insert in order.
Fixes: 13ca628716 ("perf comm: Add reference count checking to 'struct comm_str'")
Reported-by: Matt Fleming <matt@readmodwrite.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Matt Fleming <matt@readmodwrite.com>
Cc: Steinar Gunderson <sesse@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240703172117.810918-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It didn't use the passed field separator (using -x option) when it
prints the metric headers and always put "," between the fields.
Before:
$ sudo ./perf stat -a -x : --per-core -M tma_core_bound --metric-only true
core,cpus,% tma_core_bound: <<<--- here: "core,cpus," but ":" expected
S0-D0-C0:2:10.5:
S0-D0-C1:2:14.8:
S0-D0-C2:2:9.9:
S0-D0-C3:2:13.2:
After:
$ sudo ./perf stat -a -x : --per-core -M tma_core_bound --metric-only true
core:cpus:% tma_core_bound:
S0-D0-C0:2:10.5:
S0-D0-C1:2:15.0:
S0-D0-C2:2:16.5:
S0-D0-C3:2:12.5:
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240628000604.1296808-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The new --per-cluster option was added recently but it forgot to update
the aggr_header fields which are used for --metric-only option. And it
resulted in a segfault due to NULL string in fputs().
Fixes: cbc917a1b0 ("perf stat: Support per-cluster aggregation")
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240628000604.1296808-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Arm PMUs have a suffix, either a single decimal (armv8_pmuv3_0) or 3 hex
digits which (armv8_cortex_a53) which Perf assumes are both strippable
suffixes for the purposes of deduplication. S390 "cpum_cf" is a
similarly suffixed core PMU but is only two characters so is not treated
as strippable because the rules are a minimum of 3 hex characters or 1
decimal character.
There are two paths involved in listing PMU events:
* HW/cache event printing assumes core PMUs don't have suffixes so
doesn't try to strip.
* Sysfs PMU events share the printing function with uncore PMUs which
strips.
This results in slightly inconsistent Perf list behavior if a core PMU
has a suffix:
# perf list
...
armv8_pmuv3_0/branch-load-misses/
armv8_pmuv3/l3d_cache_wb/ [Kernel PMU event]
...
Fix it by partially reverting back to the old list behavior where
stripping was only done for uncore PMUs. For example commit 8d9f5146f5
("perf pmus: Sort pmus by name then suffix") mentions that only PMUs
starting 'uncore_' are considered to have a potential suffix. This
change doesn't go back that far, but does only strip PMUs that are
!is_core. This keeps the desirable behavior where the many possibly
duplicated uncore PMUs aren't repeated, but it doesn't break listing for
core PMUs.
Searching for a PMU continues to use the new stripped comparison
functions, meaning that it's still possible to request an event by
specifying the common part of a PMU name, or even open events on
multiple similarly named PMUs. For example:
# perf stat -e armv8_cortex/inst_retired/
5777173628 armv8_cortex_a53/inst_retired/ (99.93%)
7469626951 armv8_cortex_a57/inst_retired/ (49.88%)
Fixes: 3241d46f5f ("perf pmus: Sort/merge/aggregate PMUs like mrvl_ddr_pmu")
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: robin.murphy@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240626145448.896746-3-james.clark@arm.com
Commit b2b9d3a3f0 ("perf pmu: Support wildcards on pmu name in dynamic
pmu events") gives the following example for wildcarding a subset of
PMUs:
E.g., in a system with the following dynamic pmus:
mypmu_0
mypmu_1
mypmu_2
mypmu_4
perf stat -e mypmu_[01]/<config>/
Since commit f91fa2ae63 ("perf pmu: Refactor perf_pmu__match()"), only
"*" has been supported, removing the ability to subset PMUs, even though
parse-events.l still supports ? and [] characters.
Fix it by using fnmatch() when any glob character is detected and add a
test which covers that and other scenarios of
perf_pmu__match_ignoring_suffix().
Fixes: f91fa2ae63 ("perf pmu: Refactor perf_pmu__match()")
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: robin.murphy@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240626145448.896746-2-james.clark@arm.com
It's possible to save pipe output of perf record into a file.
$ perf record -o- ... > pipe.data
And you can use the data same as the normal perf data.
$ perf report -i pipe.data
In that case, perf tools will treat the input as a pipe, but it can get
the total size of the input. This means it can show the progress bar
unlike the normal pipe input (which doesn't know the total size in
advance).
While at it, fix the string in __perf_session__process_dir_events().
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240627181916.1202110-1-namhyung@kernel.org
The python build now depends on libraries and doesn't use
python-ext-sources except for the util/python.c dependency. Switch to
just directly depending on that file and util/setup.py. This allows
the removal of python-ext-sources.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-9-irogers@google.com
setup.py was building most perf sources causing setup.py to mimic the
Makefile logic as well as flex/bison code to be stubbed out, due to
complexity building. By using libraries fewer functions are stubbed
out, the build is faster and the Makefile logic is reused which should
simplify updating. The libraries are passed through LDFLAGS to avoid
complexity in python.
Force the -fPIC flag for libbpf.a to ensure it is suitable for linking
into the perf python module.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
Make the util directory into its own library. This is done to avoid
compiling code twice, once for the perf tool and once for the perf
python module. For convenience:
arch/common.c
scripts/perl/Perf-Trace-Util/Context.c
scripts/python/Perf-Trace-Util/Context.c
are made part of this library.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-7-irogers@google.com
Guilherme reported a crash in perf mem record. It's because the
perf_mem_event->name was NULL on his machine. It should just return
a NULL string when it has no format string in the name.
The backtrace at the crash is below:
Program received signal SIGSEGV, Segmentation fault.
__strchrnul_avx2 () at ../sysdeps/x86_64/multiarch/strchr-avx2.S:67
67 vmovdqu (%rdi), %ymm2
(gdb) bt
#0 __strchrnul_avx2 () at ../sysdeps/x86_64/multiarch/strchr-avx2.S:67
#1 0x00007ffff6c982de in __find_specmb (format=0x0) at printf-parse.h:82
#2 __printf_buffer (buf=buf@entry=0x7fffffffc760, format=format@entry=0x0, ap=ap@entry=0x7fffffffc880,
mode_flags=mode_flags@entry=0) at vfprintf-internal.c:649
#3 0x00007ffff6cb7840 in __vsnprintf_internal (string=<optimized out>, maxlen=<optimized out>, format=0x0,
args=0x7fffffffc880, mode_flags=mode_flags@entry=0) at vsnprintf.c:96
#4 0x00007ffff6cb787f in ___vsnprintf (string=<optimized out>, maxlen=<optimized out>, format=<optimized out>,
args=<optimized out>) at vsnprintf.c:103
#5 0x00005555557b9391 in scnprintf (buf=0x555555fe9320 <mem_loads_name> "", size=100, fmt=0x0)
at ../lib/vsprintf.c:21
#6 0x00005555557b74c3 in perf_pmu__mem_events_name (i=0, pmu=0x555556832180) at util/mem-events.c:106
#7 0x00005555557b7ab9 in perf_mem_events__record_args (rec_argv=0x55555684c000, argv_nr=0x7fffffffca20)
at util/mem-events.c:252
#8 0x00005555555e370d in __cmd_record (argc=3, argv=0x7fffffffd760, mem=0x7fffffffcd80) at builtin-mem.c:156
#9 0x00005555555e49c4 in cmd_mem (argc=4, argv=0x7fffffffd760) at builtin-mem.c:514
#10 0x000055555569716c in run_builtin (p=0x555555fcde80 <commands+672>, argc=8, argv=0x7fffffffd760) at perf.c:349
#11 0x0000555555697402 in handle_internal_command (argc=8, argv=0x7fffffffd760) at perf.c:402
#12 0x0000555555697560 in run_argv (argcp=0x7fffffffd59c, argv=0x7fffffffd590) at perf.c:446
#13 0x00005555556978a6 in main (argc=8, argv=0x7fffffffd760) at perf.c:562
Reported-by: Guilherme Amadio <amadio@cern.ch>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Closes: https://lore.kernel.org/linux-perf-users/Zlns_o_IE5L28168@cern.ch
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-5-namhyung@kernel.org
A compiler warning on the second argument of bsearch() should not be
NULL, but there's a case we might pass it. Let's return early if we
don't have any DSOs to search in __dsos__find_by_longname_id().
util/dsos.c:184:8: runtime error: null pointer passed as argument 2, which is declared to never be null
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406180932.84be448c-oliver.sang@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-4-namhyung@kernel.org
In dso__load(), it checks if the dso is a kernel module by looking the
symtab type. Actually dso has 'is_kmod' field to check that easily and
dso__set_module_info() set the symtab type and the is_kmod bit. So it
should have the same result to check the is_kmod bit.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-3-namhyung@kernel.org
It's expected that both hist entries are in the same hists when
comparing two. But the current code in the function checks one without
dso sort key and other with the key. This would make the condition true
in any case.
I guess the intention of the original commit was to add '!' for the
right side too. But as it should be the same, let's just remove it.
Fixes: 69849fc5d2 ("perf hists: Move sort__has_dso into struct perf_hpp_list")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org
In the previous loop, all the members in the aliases[j-1] have been freed
and set to NULL. But in this loop, the function pmu_alias_is_duplicate()
compares the aliases[j] with the aliases[j-1] that has already been
disposed, so the function will always return false and duplicate aliases
will never be discarded.
If we find duplicate aliases, it skips the zfree aliases[j], which is
accompanied by a memory leak.
We can use the next aliases[j+1] to theck for duplicate aliases to
fixes the aliases NULL pointer dereference, then goto zfree code snippet
to release it.
After patch testing:
$ perf list --unit=hisi_sicl,cpa pmu
uncore cpa:
cpa_p0_rd_dat_32b
[Number of read ops transmitted by the P0 port which size is 32 bytes.
Unit: hisi_sicl,cpa]
cpa_p0_rd_dat_64b
[Number of read ops transmitted by the P0 port which size is 64 bytes.
Unit: hisi_sicl,cpa]
Fixes: c3245d2093 ("perf pmu: Abstract alias/event struct")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Cc: ravi.bangoria@amd.com
Cc: james.clark@arm.com
Cc: prime.zeng@hisilicon.com
Cc: cuigaosheng1@huawei.com
Cc: jonathan.cameron@huawei.com
Cc: linuxarm@huawei.com
Cc: yangyicong@huawei.com
Cc: robh@kernel.org
Cc: renyu.zj@linux.alibaba.com
Cc: kjain@linux.ibm.com
Cc: john.g.garry@oracle.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240614094318.11607-1-hejunhao3@huawei.com
Add malloc() failure handling in unread_unwind_spec_debug_frame().
This make caller find_proc_info() works well when the allocation failure.
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Austin Kim <austindh.kim@gmail.com>
Cc: shjy180909@gmail.com
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240619204211.6438-2-yskelg@gmail.com
This patch resolve following warning.
tools/perf/util/evsel.c:1620:9: error: result of comparison of constant
-1 with expression of type 'char' is always false
-Werror,-Wtautological-constant-out-of-range-compare
1620 | if (c == -1)
| ~ ^ ~~
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Austin Kim <austindh.kim@gmail.com>
Cc: shjy180909@gmail.com
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240619203428.6330-2-yskelg@gmail.com
JMPABS is 64-bit absolute direct jump instruction, encoded with a mandatory
REX2 prefix. JMPABS is designed to be used in the procedure linkage table
(PLT) to replace indirect jumps, because it has better performance. In that
case the jump target will be amended at run time. To enable Intel PT to
follow the code, a TIP packet is always emitted when JMPABS is traced under
Intel PT.
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
Decode JMPABS as an indirect jump, because it has an associated TIP packet
the same as an indirect jump and the control flow should follow the TIP
packet payload, and not assume it is the same as the on-file object code
JMPABS target address.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-10-adrian.hunter@intel.com
commit 80d496be89 ("perf report: Add support for profiling JIT
generated code") added support for profiling JIT generated code.
This patch handles dso's of form "/tmp/perf-$PID.map".
Some of the references doesn't check exactly for same pattern.
some uses "if (!strncmp(dso_name, "/tmp/perf-", 10))". Fix
this by using helper function perf_pid_map_tid and
is_perf_pid_map_name which looks for proper pattern of
form: "/tmp/perf-$PID.map" for these checks.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-2-atrajeev@linux.vnet.ibm.com
Perf test for perf probe of function from different CU fails
as below:
./perf test -vv "test perf probe of function from different CU"
116: test perf probe of function from different CU:
--- start ---
test child forked, pid 2679
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.Msa7iy89bx/testfile
Error: Failed to add events.
--- Cleaning up ---
"foo" does not hit any event.
Error: Failed to delete events.
---- end(-1) ----
116: test perf probe of function from different CU : FAILED!
The test does below to probe function "foo" :
# gcc -g -Og -flto -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
# gcc -g -Og -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# gcc -g -Og -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# ./perf probe -x /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile foo
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
Error: Failed to add events.
Perf probe fails to find symbol foo in the executable placed in
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7
Simple reproduce:
# mktemp -d /tmp/perf-checkXXXXXXXXXX
/tmp/perf-checkcWpuLRQI8j
# gcc -g -o test test.c
# cp test /tmp/perf-checkcWpuLRQI8j/
# nm /tmp/perf-checkcWpuLRQI8j/test | grep foo
00000000100006bc T foo
# ./perf probe -x /tmp/perf-checkcWpuLRQI8j/test foo
Failed to find symbol foo in /tmp/perf-checkcWpuLRQI8j/test
Error: Failed to add events.
But it works with any files like /tmp/perf/test. Only for
patterns with "/tmp/perf-", this fails.
Further debugging, commit 80d496be89 ("perf report: Add support
for profiling JIT generated code") added support for profiling JIT
generated code. This patch handles dso's of form
"/tmp/perf-$PID.map" .
The check used "if (strncmp(self->name, "/tmp/perf-", 10) == 0)"
to match "/tmp/perf-$PID.map". With this commit, any dso in
/tmp/perf- folder will be considered separately for processing
(not only JIT created map files ). Fix this by changing the
string pattern to check for "/tmp/perf-%d.map". Add a helper
function is_perf_pid_map_name to do this check. In "struct dso",
dso->long_name holds the long name of the dso file. Since the
/tmp/perf-$PID.map check uses the complete name, use dso___long_name for
the string name.
With the fix,
# ./perf test "test perf probe of function from different CU"
117: test perf probe of function from different CU : Ok
Fixes: 56cbeacf14 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-1-atrajeev@linux.vnet.ibm.com
The hard-coded metrics is wrongly calculated on the hybrid machine.
$ perf stat -e cycles,instructions -a sleep 1
Performance counter stats for 'system wide':
18,205,487 cpu_atom/cycles/
9,733,603 cpu_core/cycles/
9,423,111 cpu_atom/instructions/ # 0.52 insn per cycle
4,268,965 cpu_core/instructions/ # 0.23 insn per cycle
The insn per cycle for cpu_core should be 4,268,965 / 9,733,603 = 0.44.
When finding the metric events, the find_stat() doesn't take the PMU
type into account. The cpu_atom/cycles/ is wrongly used to calculate
the IPC of the cpu_core.
In the hard-coded metrics, the events from a different PMU are only
SW_CPU_CLOCK and SW_TASK_CLOCK. They both have the stat type,
STAT_NSECS. Except the SW CLOCK events, check the PMU type as well.
Fixes: 0a57b91080 ("perf stat: Use counts rather than saved_value")
Reported-by: Khalil, Amiri <amiri.khalil@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606180316.4122904-1-kan.liang@linux.intel.com
Add the skip_empty flag to symbol_conf and set the value from the report
command to preserve the existing behavior. This makes the code simpler
and will be needed other code which is hard to add a new argument.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607202918.2357459-4-namhyung@kernel.org
Tool events unnecessarily open a dummy perf event which is useless
even with `perf record` which will still open a dummy event. Change
the behavior of tool events so:
- duration_time - call `rdclock` on open and then report the count as
a delta since the start in evsel__read_counter. This moves code out
of builtin-stat making it more general purpose.
- user_time/system_time - open the fd as either `/proc/pid/stat` or
`/proc/stat` for cases like system wide. evsel__read_counter will
read the appropriate field out of the procfs file. These values
were previously supplied by wait4, if the procfs read fails then
the wait4 values are used, assuming the process/thread terminated.
By reading user_time and system_time this way, interval mode, per
PID and per CPU can be supported although there are restrictions
given what the files provide (e.g. per PID can't be combined with
per CPU).
Opening any of the tool events for `perf record` is changed to return
invalid.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240503232849.17752-1-irogers@google.com
Data may have lots of overlapping mmaps. The regular insert adds at
the end and relies on a later sort. For data with overlapping mappings
the sort will happen during a subsequent maps__find or
__maps__fixup_overlap_and_insert, there's never a period where the
inserted maps buffer up and a single sort happens. To avoid back to
back sorts, maintain the sort order when fixing up and
inserting. Previously the first_ending_after search was O(log n) where
n is the size of maps, and the insert was O(1) but because of the
continuous sorting was becoming O(n*log(n)). With maintaining sort
order, the insert now becomes O(n) for a memmove.
For a perf report on a perf.data file containing overlapping mappings
the time numbers are:
Before:
real 0m5.894s
user 0m5.650s
sys 0m0.231s
After:
real 0m0.675s
user 0m0.454s
sys 0m0.196s
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-4-irogers@google.com
When an 'after' map is generated the 'new' map must be before it so
terminate iterating and don't resort. If the entry 'pos' is entirely
overlapped by the 'new' mapping then don't remove and insert the
mapping, just replace - again to remove sorting.
For a perf report on a perf.data file containing overlapping mappings
the time numbers are:
Before:
real 0m9.856s
user 0m9.637s
sys 0m0.204s
After:
real 0m5.894s
user 0m5.650s
sys 0m0.231s
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-3-irogers@google.com
In the case 'before' and 'after' are broken out from pos,
maps_by_address may be changed by __maps__insert, as such it needs
re-reading.
Don't ignore the return value from __maps_insert.
Fixes: 659ad3492b ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-2-irogers@google.com
Compiling perf tool with 'DEBUG_PARSER=1' leads to errors:
$> make -C tools/perf PARSER_DEBUG=1 NO_LIBTRACEEVENT=1
...
CC util/expr-flex.o
CC util/expr.o
util/parse-events.c:33:12: error: redundant redeclaration of ‘parse_events_debug’ [-Werror=redundant-decls]
33 | extern int parse_events_debug;
| ^~~~~~~~~~~~~~~~~~
In file included from util/parse-events.c:18:
util/parse-events-bison.h:43:12: note: previous declaration of ‘parse_events_debug’ with type ‘int’
43 | extern int parse_events_debug;
| ^~~~~~~~~~~~~~~~~~
util/expr.c:27:12: error: redundant redeclaration of ‘expr_debug’ [-Werror=redundant-decls]
27 | extern int expr_debug;
| ^~~~~~~~~~
In file included from util/expr.c:11:
util/expr-bison.h:43:12: note: previous declaration of ‘expr_debug’ with type ‘int’
43 | extern int expr_debug;
| ^~~~~~~~~~
cc-1: all warnings being treated as errors
Remove extern declaration from the parse-envents.c file as there is a
conflict with the ones generated using bison and yacc tools from the file
parse-events.[ly].
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240605140453.614862-1-clement.legoffic@foss.st.com
'hisi_ptt_queue' has been unused since the original
commit 5e91e57e68 ("perf auxtrace arm64: Add support for parsing
HiSilicon PCIe Trace packet").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: yangyicong@hisilicon.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240602000709.213116-1-linux@treblig.org
'options' has been unused since
commit fa7f7e7354 ("perf jit: Move test functionality in to a test").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240602000505.213032-1-linux@treblig.org
Allow the BPF filter to use the uid and gid terms determined by the
bpf_get_current_uid_gid BPF helper. For example, the following will
record the cpu-clock event system wide discarding samples that don't
belong to the current user.
$ perf record -e cpu-clock --filter "uid == $(id -u)" -a sleep 0.1
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240524205227.244375-3-irogers@google.com
Give the term types their own enum so that additional terms can be
added that don't correspond to a PERF_SAMPLE_xx flag. The term values
are numerically ascending rather than bit field positions, this means
they need translating to a PERF_SAMPLE_xx bit field in certain places
using a shift.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240524205227.244375-2-irogers@google.com
The mrvl_ddr_pmu is uncore and has a hexadecimal address suffix while
the previous PMU sorting/merging code assumes uncore PMU names start
with uncore_ and have a decimal suffix. Because of the previous
assumption it isn't possible to wildcard the mrvl_ddr_pmu.
Modify pmu_name_len_no_suffix but also remove the suffix number out
argument, this is because we don't know if a suffix number of say 100
is in hexadecimal or decimal. As the only use of the suffix number is
in comparisons, it is safe there to compare the values as hexadecimal.
Modify perf_pmu__match_ignoring_suffix so that hexadecimal suffixes
are ignored.
Only allow hexadecimal suffixes to be greater than length 2 (ie 3 or
more) so that S390's cpum_cf PMU doesn't lose its suffix.
Change the return type of pmu_name_len_no_suffix to size_t to
workaround GCC incorrectly determining the result could be negative.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: Bhaskara Budiredla <bbudiredla@marvell.com>
Cc: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515060114.3268149-2-irogers@google.com
This reverts commit 617824a7f0.
This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.
The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Add Kan Liang to MAINTAINERS as a perf tools reviewer.
- Add support for using the 'capstone' disassembler library in various tools,
such as 'perf script' and 'perf annotate'. This is an alternative for the
use of the 'xed' and 'objdump' disassemblers.
- Data-type profiling improvements:
Resolve types for a->b->c by backtracking the assignments until it finds
DWARF info for one of those members
Support for global variables, keeping a cache to speed up lookups.
Handle the 'call' instruction, dealing with effects on registers and handling
its return when tracking register data types.
Handle x86's segment based addressing like %gs:0x28, to support things like
per CPU variables, the stack canary, etc.
Data-type profiling got big speedups when using capstone for disassembling.
The objdump outoput parsing method is left as a fallback when capstone fails or
isn't available. There are patches posted for 6.11 that to use a LLVM
disassembler.
Support event group display in the TUI when annotating types with --data-type,
for instance to show memory load and store events for the data type fields.
Optimize the 'perf annotate' data structures, reducing memory usage.
Add a initial 'perf test' for 'perf annotate', checking that a target symbol
appears on the output, specifying objdump via the command line, etc.
- Integrate the shellcheck utility with the build of perf to allow catching
shell problems early in areas such as 'perf test', 'perf trace' scrape
scripts, etc.
- Add 'uretprobe' variant in the 'perf bench uprobe' tool.
- Add script to run instances of 'perf script' in parallel.
- Allow parsing tracepoint names that start with digits, such as
9p/9p_client_req, etc. Make sure 'perf test' tests it even on systems
where those tracepoints aren't available.
Vendor Events:
- Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand Ridge, Ice
Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra Forest, Sky Lake X,
Sky Lake and Snow Ridge X. Remove info metrics erroneously in TopdownL1.
- Add AMD's Zen 5 core and uncore events and metrics. Those come from the
"Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh Processors"
document, with events that capture information on op dispatch, execution and
retirement, branch prediction, L1 and L2 cache activity, TLB activity, etc.
- Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/AmpereOneX.
Miscellaneous:
- Sync header copies with the kernel sources.
- Move some header copies used only for generating translation string tables
for ioctl cmds and other syscall integer arguments to a new directory under
tools/perf/beauty/, to separate from copies in tools/include/ that are used
to build the tools.
- Introduce scrape script for several syscall 'flags'/'mask' arguments.
- Improve cpumap utilization, fixing up pairing of refcounts, using the right
iterators (perf_cpu_map__for_each_cpu), etc.
- Give more details about raw event encodings in 'perf list', show tracepoint
encoding in the detailed output.
- Refactor the DSOs handling code, reducing memory usage.
- Document the BPF event modifier and add a 'perf test' for it.
- Improve the event parser, better error messages and add further 'perf test's
for it.
- Add reference count checking to 'struct comm_str' and 'struct mem_info'.
- Make ARM64's 'perf test' entries for the Neoverse N1 more robust.
- Tweak the ARM64's Coresight 'perf test's.
- Improve ARM64's CoreSight ETM version detection and error reporting.
- Fix handling of symbols when using kcore.
- Fix PAI (Processor Activity Instrumentation) counter names for s390 virtual
machines in 'perf report'.
- Fix -g/--call-graph option failure in 'perf sched timehist'.
- Add LIBTRACEEVENT_DIR build option to allow building with libtraceevent
installed in non-standard directories, such as when doing cross builds.
- Various 'perf test' and 'perf bench' fixes.
- Improve 'perf probe' error message for long C++ probe names.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZkzdjgAKCRCyPKLppCJ+
J8ZYAP46rcbOuDWol6tjD9FDXd+spkWc40bnqeSnOR+TWlmJXwEA87XU4+3LAh6p
HQxKXehJRh90I90yn954mK2NuN+58Q0=
=sie+
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"General:
- Integrate the shellcheck utility with the build of perf to allow
catching shell problems early in areas such as 'perf test', 'perf
trace' scrape scripts, etc
- Add 'uretprobe' variant in the 'perf bench uprobe' tool
- Add script to run instances of 'perf script' in parallel
- Allow parsing tracepoint names that start with digits, such as
9p/9p_client_req, etc. Make sure 'perf test' tests it even on
systems where those tracepoints aren't available
- Add Kan Liang to MAINTAINERS as a perf tools reviewer
- Add support for using the 'capstone' disassembler library in
various tools, such as 'perf script' and 'perf annotate'. This is
an alternative for the use of the 'xed' and 'objdump' disassemblers
Data-type profiling improvements:
- Resolve types for a->b->c by backtracking the assignments until it
finds DWARF info for one of those members
- Support for global variables, keeping a cache to speed up lookups
- Handle the 'call' instruction, dealing with effects on registers
and handling its return when tracking register data types
- Handle x86's segment based addressing like %gs:0x28, to support
things like per CPU variables, the stack canary, etc
- Data-type profiling got big speedups when using capstone for
disassembling. The objdump outoput parsing method is left as a
fallback when capstone fails or isn't available. There are patches
posted for 6.11 that to use a LLVM disassembler
- Support event group display in the TUI when annotating types with
--data-type, for instance to show memory load and store events for
the data type fields
- Optimize the 'perf annotate' data structures, reducing memory usage
- Add a initial 'perf test' for 'perf annotate', checking that a
target symbol appears on the output, specifying objdump via the
command line, etc
Vendor Events:
- Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand
Ridge, Ice Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra
Forest, Sky Lake X, Sky Lake and Snow Ridge X. Remove info metrics
erroneously in TopdownL1
- Add AMD's Zen 5 core and uncore events and metrics. Those come from
the "Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh
Processors" document, with events that capture information on op
dispatch, execution and retirement, branch prediction, L1 and L2
cache activity, TLB activity, etc
- Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/
AmpereOneX
Miscellaneous:
- Sync header copies with the kernel sources
- Move some header copies used only for generating translation string
tables for ioctl cmds and other syscall integer arguments to a new
directory under tools/perf/beauty/, to separate from copies in
tools/include/ that are used to build the tools
- Introduce scrape script for several syscall 'flags'/'mask'
arguments
- Improve cpumap utilization, fixing up pairing of refcounts, using
the right iterators (perf_cpu_map__for_each_cpu), etc
- Give more details about raw event encodings in 'perf list', show
tracepoint encoding in the detailed output
- Refactor the DSOs handling code, reducing memory usage
- Document the BPF event modifier and add a 'perf test' for it
- Improve the event parser, better error messages and add further
'perf test's for it
- Add reference count checking to 'struct comm_str' and 'struct
mem_info'
- Make ARM64's 'perf test' entries for the Neoverse N1 more robust
- Tweak the ARM64's Coresight 'perf test's
- Improve ARM64's CoreSight ETM version detection and error reporting
- Fix handling of symbols when using kcore
- Fix PAI (Processor Activity Instrumentation) counter names for s390
virtual machines in 'perf report'
- Fix -g/--call-graph option failure in 'perf sched timehist'
- Add LIBTRACEEVENT_DIR build option to allow building with
libtraceevent installed in non-standard directories, such as when
doing cross builds
- Various 'perf test' and 'perf bench' fixes
- Improve 'perf probe' error message for long C++ probe names"
* tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (260 commits)
tools lib subcmd: Show parent options in help
perf pmu: Count sys and cpuid JSON events separately
perf stat: Don't display metric header for non-leader uncore events
perf annotate-data: Ensure the number of type histograms
perf annotate: Fix segfault on sample histogram
perf daemon: Fix file leak in daemon_session__control
libsubcmd: Fix parse-options memory leak
perf lock: Avoid memory leaks from strdup()
perf sched: Rename 'switches' column header to 'count' and add usage description, options for latency
perf tools: Ignore deleted cgroups
perf parse: Allow tracepoint names to start with digits
perf parse-events: Add new 'fake_tp' parameter for tests
perf parse-events: pass parse_state to add_tracepoint
perf symbols: Fix ownership of string in dso__load_vmlinux()
perf symbols: Update kcore map before merging in remaining symbols
perf maps: Re-use __maps__free_maps_by_name()
perf symbols: Remove map from list before updating addresses
perf tracepoint: Don't scan all tracepoints to test if one exists
perf dwarf-aux: Fix build with HAVE_DWARF_CFI_SUPPORT
perf thread: Fixes to thread__new() related to initializing comm
...
Sys events are eagerly loaded as each event has a compat option that may
mean the event is or isn't associated with the PMU.
These shouldn't be counted as loaded_json_events as that is used for
JSON events matching the CPUID that may or may not have been loaded. The
mismatch causes issues on ARM64 that uses sys events.
Fixes: e6ff1eed35 ("perf pmu: Lazily add JSON events")
Closes: https://lore.kernel.org/lkml/20240510024729.1075732-1-justin.he@arm.com/
Reported-by: Jia He <justin.he@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240511003601.2666907-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On an Intel tigerlake laptop a metric like:
{
"BriefDescription": "Test",
"MetricExpr": "imc_free_running@data_read@ + imc_free_running@data_write@",
"MetricGroup": "Test",
"MetricName": "Test",
"ScaleUnit": "6.103515625e-5MiB"
},
Will have 4 events:
uncore_imc_free_running_0/data_read/
uncore_imc_free_running_0/data_write/
uncore_imc_free_running_1/data_read/
uncore_imc_free_running_1/data_write/
If aggregration is disabled with metric-only 2 column headers are
needed:
$ perf stat -M test --metric-only -A -a sleep 1
Performance counter stats for 'system wide':
MiB Test MiB Test
CPU0 1821.0 1820.5
But when not, the counts aggregated in the metric leader and only 1
column should be shown:
$ perf stat -M test --metric-only -a sleep 1
Performance counter stats for 'system wide':
MiB Test
5909.4
1.001258915 seconds time elapsed
Achieve this by skipping events that aren't metric leaders when
printing column headers and aggregation isn't disabled.
The bug is long standing, the fixes tag is set to a refactor as that
is as far back as is reasonable to backport.
Fixes: 088519f318 ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaige Ye <ye@kaige.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240510051309.2452468-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo reported that there is a case where nr_histograms and histograms
don't agree each other.
It ended up in a segfault trying to access a NULL histograms array.
Let's make sure to update the nr_histograms when the histograms array is
changed.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510210452.2449944-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A symbol can have no samples, then accessing the annotated_source->samples
hashmap will result in a segfault.
Fixes: a3f7768bcf ("perf annotate: Fix memory leak in annotated_source")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510210452.2449944-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On large systems, cgroups can be created and deleted often. That means
there's a race between perf tools and cgroups when it gets the cgroup
name and opens the cgroup.
I got a report that 'perf stat' with many cgroups failed quite often due
to the missing cgroups on such a large machine.
I think we can ignore such cgroups when expanding events and use id 0 if
it fails to read the cgroup id. IIUC 0 is not a vaild cgroup id so it
won't update event counts for the failed cgroups.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240509182235.2319599-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tracepoints can start with digits, although we don't have many of these:
$ rg -g '*.h' '\bTRACE_EVENT\([0-9]'
net/mac802154/trace.h
53:TRACE_EVENT(802154_drv_return_int,
...
net/ieee802154/trace.h
66:TRACE_EVENT(802154_rdev_add_virtual_intf,
...
include/trace/events/9p.h
124:TRACE_EVENT(9p_client_req,
...
Just allow names to start with digits too so e.g. "perf trace -e '9p:*'"
works
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510-perf_digit-v4-3-db1553f3233b@codewreck.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The next commit will allow tracepoints starting with digits, but most
systems do not have any available by default so tests should skip the
actual "check if it exists in /sys/kernel/debug/tracing" step.
In order to do that, add a new boolean flag specifying if we should
actually "format" the probe or not.
Originally-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510-perf_digit-v4-2-db1553f3233b@codewreck.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The next patch will add another flag to parse_state that we will want to
pass to evsel__newtp_idx(), so pass the whole parse_state all the way
down instead of giving only the index
Originally-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510-perf_digit-v4-1-db1553f3233b@codewreck.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The linked commit updated dso__load_vmlinux() to call
dso__set_long_name() before loading the symbols. Loading the symbols may
not succeed but dso__set_long_name() takes ownership of the string. The
two callers of this function free the string themselves on failure
cases, resulting in the following error:
$ perf record -- ls
$ perf report
free(): double free detected in tcache 2
Fix it by always taking ownership of the string, even on failure. This
means the string is either freed at the very first early exit condition,
or later when the dso is deleted or the long name is replaced. Now no
special return value is needed to signify that the caller needs to
free the string.
Fixes: e59fea47f8 ("perf symbols: Fix DSO kernel load and symbol process to correctly map DSO to its long_name, type and adjust_symbols")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When loading kcore, the main vmlinux map is updated in the same loop
that merges the remaining maps. If a map that overlaps is merged in
before kcore, the list can become unsortable when the main map addresses
are updated. This will later trigger the check_invariants() assert:
$ perf record
$ perf report
util/maps.c:96: check_invariants: Assertion `map__end(prev) <=
map__start(map) || map__start(prev) == map__start(map)' failed.
Aborted
Fix it by moving the main map update prior to the loop so that
maps__merge_in() can split it if necessary.
Fixes: 659ad3492b ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
maps__merge_in() hard codes the steps to free the maps_by_name list. It
seems to not map__put() each element before freeing, and it sets
maps_by_name_sorted to true after freeing, which may be harmless but
is inconsistent with maps__init() and other functions.
maps__maps_by_name_addr() is also quite hard to read because we already
have maps__maps_by_name() and maps__maps_by_address(), but the function
is only used in that place so delete it.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the order of operations remove, update, add. Updating addresses
before the map is removed causes the ordering check to fail when the map
is removed. This can be reproduced when running Perf on an Arm system
with a static kernel and Perf uses kcore rather than other sources:
$ perf record -- ls
$ perf report
util/maps.c:96: check_invariants: Assertion `map__end(prev) <=
map__start(map) || map__start(prev) == map__start(map)' failed
Fixes: 659ad3492b ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In is_valid_tracepoint, rather than scanning
"/sys/kernel/tracing/events/*/*" skipping any path where
"/sys/kernel/tracing/events/*/*/id" doesn't exist, and then testing if
"*:*" matches the tracepoint name, just use the given tracepoint name
replace the ':' with '/' and see if the id file exists.
This turns a nested directory search into a single file available test.
Rather than return 1 for valid and 0 for invalid, return true and false.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240509153245.1990426-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
check_allowed_ops() is used from both HAVE_DWARF_GETLOCATIONS_SUPPORT
and HAVE_DWARF_CFI_SUPPORT sections, so move it into the right place so
that it's available when either are defined. This shows up when doing
a static cross compile for arm64:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- LDFLAGS="-static" \
EXTRA_PERFLIBS="-lexpat"
util/dwarf-aux.c:1723:6: error: implicit declaration of function 'check_allowed_ops'
Fixes: 55442cc2f2 ("perf dwarf-aux: Check allowed DWARF Ops")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240508141458.439017-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Freeing the thread on failure won't work with reference count checking,
use thread__delete().
Don't allocate the comm_str, use a stack allocation instead.
Fixes: f6005cafeb ("perf thread: Add reference count checking")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240508035301.1554434-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Searching for the entry in the array needs to avoid the intermediate
pointer with reference count checking.
Refactor the array removal to binary search for the entry.
Change the array to hold an entry with a reference count (so the
intermediate pointer can work) and remove from the array when the
reference count on a comm_str falls to 1.
Fixes: 13ca628716 ("perf comm: Add reference count checking to 'struct comm_str'")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240508035301.1554434-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's confusing both pointers and arrays are printed as *. Let's print
array types with [] so that we can identify them easily. Although it's
interchangable, sometimes it can cause confusion with size like in the
below example.
Note that it is not the same with C syntax where it goes to the variable
names, but we want to have it in the type names (like in Go language).
Before:
mov [20] 0x68(reg5) -> reg0 type='struct page**' size=0x80 (die:0x4e61d32)
After:
mov [20] 0x68(reg5) -> reg0 type='struct page*[]' size=0x80 (die:0x4e61d32)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507041338.2081775-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'struct mem_info' is reference counted while 'struct branch_info' and
he_cache (struct hist_entry **) are not.
Break apart the priv field in 'struct hist_entry_iter' so that we can
know which values are owned by the iter and do the appropriate free or
put.
Move hide_unresolved to marginally shrink the size of the now grown
struct.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add reference count checking and switch 'struct mem_info' usage to use
accessor functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move mem-info to its own header rather than having it split between
mem-events and symbol.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reference count checking of an rbtree is troublesome as each pointer
should have a reference, switch to using a sorted array.
Remove an indirection by embedding the reference count with the string.
Use pthread_once to safely initialize the comm_strs and reader writer
mutex.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is assigned a value of 1 and never incremented. Remove and replace
puts with delete.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
block_info__get() has no callers so the refcount is only ever one. As
such remove the reference counting logic and turn puts to deletes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Freeing hash map doesn't free the entries added to the hashmap, add
the missing free().
Fixes: d3e7cad6f3 ("perf annotate: Add a hashmap for symbol histogram")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently it's only possible to initialize with the default number of
queues and then use auxtrace_queues__add_event() to grow the array.
But that's problematic if you don't have a real event to pass into that
function yet.
The queues hold a void *priv member to store custom state, and for
Coresight we want to create decoders upfront before receiving data, so
add a new function that allows pre-allocating queues.
One reason to do this is because we might need to store metadata (HW_ID
events) that effects other queues, but never actually receive auxtrace
data on that queue.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Clevenger <scclevenger@os.amperecomputing.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240429152207.479221-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The likely fix for this is to update perf so print a helpful message.
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Acked-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Clevenger <scclevenger@os.amperecomputing.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240429152207.479221-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a comment in function which explains how multi_regs field gets set
for an instruction. In the example, "mov %rsi, 8(%rbx,%rcx,4)", the
comment mistakenly referred to "dst_multi_regs = 0". Correct it to use
"src_multi_regs = 0"
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Akanksha J N <akanksha@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20240506121906.76639-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When freeing a->b it is good practice to set a->b to NULL using
zfree(&a->b) so that when we have a bug where a reference to a freed 'a'
pointer is kept somewhere, we can more quickly cause a segfault if some
code tries to use a->b.
Convert one such case in the callchain code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZjmcGobQ8E52EyjJ@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When freeing a->b it is good practice to set a->b to NULL using
zfree(&a->b) so that when we have a bug where a reference to a freed 'a'
pointer is kept somewhere, we can more quickly cause a segfault if some
code tries to use a->b.
This is mostly done but some new cases were introduced recently, convert
them to zfree().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZjmbHHrjIm5YRIBv@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dso pointer in 'struct dso_data' is necessary for reference count
checking to account for the dso_data forming a global list of open dso's
with references to the dso.
The dso pointer also allows for the indirection that reference count
checking needs. Outside of reference count checking the indirection
isn't needed and container_of() is more efficient and saves space.
The reference count won't be increased by placing items onto the global
list, matching how things were before the reference count checking
change, but we assert the dso is in dsos holding it live (and that the
set of open dsos is a subset of all dsos for the machine).
Update the DSO data tests so that they use a dsos struct to make the
invariant true.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__load_sym_internal() passed curr_mapp as an out argument to
dso__process_kernel_symbol(). The out argument was never used so remove
it to simplify the reference counting logic.
Simplify reference counting issues with curr_dso by ensuring the value
it points to has a +1 reference count, and then putting as
necessary.
This avoids some reference counting games when the dso is created making
the code more obviously correct with some possible introduced overhead
due to the reference counting get/puts.
This, however, silences reference count checking and we can always
optimize from a seemingly correct point.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dso__put() after the map creation causes a use after put in
dso__set_loaded().
To ensure there is a +1 reference count on both sides of the if-else, do
a dso__get() on the found map's dso.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A dso__put() is needed for the dsos__find() when the map is created and
a buildid is sought.
Fixes: f649ed80f3 ("perf dsos: Tidy reference counting and locking")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add reference count checking to struct dso, this can help with
implementing correct reference counting discipline. To avoid
RC_CHK_ACCESS everywhere, add accessor functions for the variables in
struct dso.
The majority of the change is mechanical in nature and not easy to
split up.
Committer testing:
'perf test' up to this patch shows no regressions.
But:
util/symbol.c: In function ‘dso__load_bfd_symbols’:
util/symbol.c:1683:9: error: too few arguments to function ‘dso__set_adjust_symbols’
1683 | dso__set_adjust_symbols(dso);
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from util/symbol.c:21:
util/dso.h:268:20: note: declared here
268 | static inline void dso__set_adjust_symbols(struct dso *dso, bool val)
| ^~~~~~~~~~~~~~~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: /tmp/tmp.ZWHbQftdN6/util/symbol.o] Error 1
MKDIR /tmp/tmp.ZWHbQftdN6/tests/workloads/
make[6]: *** Waiting for unfinished jobs....
This was updated:
- symbols__fixup_end(&dso->symbols, false);
- symbols__fixup_duplicate(&dso->symbols);
- dso->adjust_symbols = 1;
+ symbols__fixup_end(dso__symbols(dso), false);
+ symbols__fixup_duplicate(dso__symbols(dso));
+ dso__set_adjust_symbols(dso);
But not build tested with BUILD_NONDISTRO and libbfd devel files installed
(binutils-devel on fedora).
Add the missing argument:
symbols__fixup_end(dso__symbols(dso), false);
symbols__fixup_duplicate(dso__symbols(dso));
- dso__set_adjust_symbols(dso);
+ dso__set_adjust_symbols(dso, true);
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch to using the bsearch library function rather than having a hand
written binary search. Const-ify some static functions to avoid compiler
warnings.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function was only called in dsos.c with the dso parameter as
NULL. Remove the function and specialize for the dso being NULL case
removing other unused functions along the way.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function no longer used so remove.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
DSOs were held on a list for fast iteration and in an rbtree for fast
finds.
Switch to using a lazily sorted array where iteration is just iterating
through the array and binary searches are the same complexity as
searching the rbtree.
The find may need to sort the array first which does increase the
complexity, but add operations have lower complexity and overall the
complexity should remain about the same.
The set name operations on the dso just records that the array is no
longer sorted, avoiding complexity in rebalancing the rbtree.
Tighter locking discipline is enforced to avoid the array being resorted
while long and short names or ids are changed.
The array is smaller in size, replacing 6 pointers with 2, and so even
with extra allocated space in the array, the array may be 50%
unoccupied, the memory saving should be at least 2x.
Committer testing:
On a previous version of this patchset we were getting a lot of warnings
about deleting a DSO still on a list, now it is ok:
root@x1:~# perf probe -l
root@x1:~# perf probe finish_task_switch
Added new event:
probe:finish_task_switch (on finish_task_switch)
You can now use it in all perf tools, such as:
perf record -e probe:finish_task_switch -aR sleep 1
root@x1:~# perf probe -l
probe:finish_task_switch (on finish_task_switch@kernel/sched/core.c)
root@x1:~# perf trace -e probe:finish_task_switch/max-stack=8/ --max-events=1
0.000 migration/0/19 probe:finish_task_switch(__probe_ip: -1894408688)
finish_task_switch.isra.0 ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
smpboot_thread_fn ([kernel.kallsyms])
kthread ([kernel.kallsyms])
ret_from_fork ([kernel.kallsyms])
ret_from_fork_asm ([kernel.kallsyms])
root@x1:~#
root@x1:~# perf probe -d probe:*
Removed event: probe:finish_task_switch
root@x1:~# perf probe -l
root@x1:~#
I also ran the full 'perf test' suite after applying this one, no
regressions.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.
Consider:
$ perf stat -e inst_retired.any true
The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.
This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.
For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.
Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow events/aliases to be eagerly loaded for a PMU. Factor out the
pmu_aliases_parse to allow this.
Parse a test event and check it configures the attribute as expected.
There is overlap with the parse-events tests, but this test is done with
a PMU created in a temp directory and doesn't rely on PMUs in sysfs.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tests/pmu.c, make a common utility that creates a PMU in a mkdtemp
directory and uses regular PMU parsing logic to load that PMU. Formats
must still be eagerly loaded as by default the PMU code assumes devices
are going to be in sysfs.
In util/pmu.[ch], hide perf_pmu__format_parse but add the eager argument
to perf_pmu__lookup called by perf_pmus__add_test_pmu. Later patches
will eagerly load other non-sysfs files when eager loading is enabled.
In tests/pmu.c, rather than manually constructing a list of term
arguments, just use the term parsing code from a string.
Add more comments and debug logging.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found that the debug build was a slowed down a lot by the maps lock
code since it checks the invariants whenever it gets the pointer to the
lock. This means it checks twice the invariants before and after the
access.
Instead, let's move the checking code within the lock area but after any
modification and remove it from the read paths. This would remove (more
than) half of the maps lock overhead.
The time for perf report with a huge data file (200k+ of MMAP2 events).
Non-debug Before After
--------- -------- --------
2m 43s 6m 45s 4m 21s
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240429225738.1491791-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I sometimes see ("unknown type") in the result and it was because it
didn't check the type of stack variables properly during the instruction
tracking. The stack can carry constant values (without type info) and
if the target instruction is accessing the stack location, it resulted
in the "unknown type".
Maybe we could pick one of integer types for the constant, but it
doesn't really mean anything useful. Let's just drop the stack slot if
it doesn't have a valid type info.
Here's an example how it got the unknown type.
Note that 0xffffff48 = -0xb8.
-----------------------------------------------------------
find data type for 0xffffff48(reg6) at ...
CU for ...
frame base: cfa=0 fbreg=6
scope: [2/2] (die:11cb97f)
bb: [37 - 3a]
var [37] reg15 type='int' size=0x4 (die:0x1180633)
bb: [40 - 4b]
mov [40] imm=0x1 -> reg13
var [45] reg8 type='sigset_t*' size=0x8 (die:0x11a39ee)
mov [45] imm=0x1 -> reg2 <--- here reg2 has a constant
bb: [215 - 237]
mov [218] reg2 -> -0xb8(stack) constant <--- and save it to the stack
mov [225] reg13 -> -0xc4(stack) constant
call [22f] find_task_by_vgpid
call [22f] return -> reg0 type='struct task_struct*' size=0x8 (die:0x11881e8)
bb: [5c8 - 5cf]
bb: [2fb - 302]
mov [2fb] -0xc4(stack) -> reg13 constant
bb: [13b - 14d]
mov [143] 0xd50(reg3) -> reg5 type='struct task_struct*' size=0x8 (die:0xa31f3c)
bb: [153 - 153]
chk [153] reg6 offset=0xffffff48 ok=0 kind=0 fbreg <--- access here
found by insn track: 0xffffff48(reg6) type-offset=0
type='G<EF>^K<F6><AF>U' size=0 (die:0xffffffffffffffff)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The instruction tracking should be the same for the both registers.
Just do it once and compare the result with multi regs as with the
previous patches.
Then we don't need to call find_data_type_block() separately for each
reg.
Let's remove the 'reg' argument from the relevant functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following instruction pattern is used to access a global variable.
mov $0x231c0, %rax
movsql %edi, %rcx
mov -0x7dc94ae0(,%rcx,8), %rcx
cmpl $0x0, 0xa60(%rcx,%rax,1) <<<--- here
The first instruction set the address of the per-cpu variable (here, it
is 'runqueues' of type 'struct rq'). The second instruction seems like
a cpu number of the per-cpu base. The third instruction get the base
offset of per-cpu area for that cpu. The last instruction compares the
value of the per-cpu variable at the offset of 0xa60.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like per-cpu base offset array, sometimes it accesses the global
variable directly using the offset. Allow this type of instructions as
long as it finds a global variable for the address.
movslq %edi, %rcx
mov -0x7dc94ae0(,%rcx,8), %rcx <<<--- here
As %rcx has a valid type (i.e. array index) from the first instruction,
it will be checked by the first case in check_matching_type(). But as
it's not a pointer type, the match will fail. But in this case, it
should check if it accesses the kernel global array variable.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently it looks up global variables from the current CU using address
and name. But it sometimes fails to find a variable as the variable can
come from a different CU - but it's still strange it failed to find a
declaration for some reason.
Anyway, it can collect all global variables from all CU once and then
lookup them later on. This slightly improves the success rate of my
test data set.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function is to search all global variables in the CU. We want to
have the list of global variables at once and match them later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
MemorySanitizer discovered instances where the instruction op value was
not assigned.:
WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x5581c00a76b3 in intel_pt_sample_flags tools/perf/util/intel-pt.c:1527:17
Uninitialized value was stored to memory at
#0 0x5581c005ddf8 in intel_pt_walk_insn tools/perf/util/intel-pt-decoder/intel-pt-decoder.c:1256:25
The op value is used to set branch flags for branch instructions
encountered when walking the code, so fix by setting op to
INTEL_PT_OP_OTHER in other cases.
Fixes: 4c761d805b ("perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type")
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/20240320162619.1272015-1-irogers@google.com/
Link: https://lore.kernel.org/r/20240326083223.10883-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__disassemble_filename() tries to get the filename for objdump (or
capstone) using build-id. But I found sometimes it didn't disassemble
some functions.
It turned out that those functions belong to a DSO which has no binary
type set. It seems it sets the binary type for some special files only
- like kernel (kallsyms or kcore) or BPF images. And there's a logic to
skip dso with DSO_BINARY_TYPE__NOT_FOUND.
As it's checked the build-id cache link, it should set the binary type
as DSO_BINARY_TYPE__BUILD_ID_CACHE.
Fixes: 873a83731f ("perf annotate: Skip DSOs not found")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240425005157.1104789-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found some cases that capstone failed to disassemble. Probably my
capstone is an old version but anyway there's a chance it can fail. And
then it silently stopped in the middle. In my case, it didn't
understand "RDPKRU" instruction.
Let's check if the capstone disassemble reached the end of the function
and fallback to objdump if not.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240425005157.1104789-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it removed the sample accounting for code when no symbol sort key is
given for 'perf report' TUI, it might not have allocated the
'struct annotated_source' yet. Let's check if it's NULL first.
Fixes: 6cdd977ec2 ("perf report: Do not collect sample histogram unnecessarily")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240424230015.1054013-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add comments. Pass ownership of the event name to save on a strdup.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add comments. Ensure leader->group_name is freed before overwriting
it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-16-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moves 352 bytes from .data to .data.rel.ro.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use a struct/bitmap rather than a copied string from lexer.
In lexer give improved error message when too many precise flags are
given or repeated modifiers.
Before:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Bad modifier
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Bad modifier
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' -a true
event syntax error: '..cycles:pp}:pp'
\___ Bad modifier
...
After:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Duplicate modifier 'k' (kernel)
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Maximum precise value is 3
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' true
event syntax error: '..cycles:pp}:pp'
\___ Maximum combined precise value is 3, adding precision to "cycles:pp"
...
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Inline parse_events_evlist_error that is only used in
parse_events_error. Modify parse_events_error to not report a parser
error unless errors haven't already been reported. Make it clearer
that the latter case only happens for unrecognized input.
Before:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
event syntax error: '..les/period=99999999999999999999/'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
After:
$ perf stat -e 'cycles/period=99999999999999999999/xyz' true
event syntax error: '..les/period=99999999999999999999/xyz'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ Unrecognized input
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the error handler from the parse_state to give a more informative
error message.
Before:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
After:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
event syntax error: '..les/period=99999999999999999999/'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The helper function just wraps a splice and free. Making the free
inline removes a comment, so then it just wraps a splice which we can
make inline too.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was requested that RISC-V be able to add events to the perf tool so
the PMU driver didn't need to map legacy events to config encodings:
https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/
This change makes the priority of events specified without a PMU the
same as those specified with a PMU, namely sysfs and JSON events are
checked first before using the legacy encoding.
The hw_term is made more generic as a hardware_event that encodes a
pair of string and int value, allowing parse_events_multi_pmu_add to
fall back on a known encoding when the sysfs/JSON adding fails for
core events. As this covers PE_VALUE_SYM_HW, that token is removed and
related code simplified.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow the term list to be const so that other functions can pass const
term lists. Add const as necessary to called functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid duplicate logic for name_or_raw and PE_TERM_HW by having a rule
to turn PE_TERM_HW into a name_or_raw.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prior behavior is to not look for legacy cache names in sysfs/JSON and
to create events on all core PMUs. New behavior is to look for
sysfs/JSON events first on all PMUs, for core PMUs add a legacy event
if the sysfs/JSON event isn't present.
This is done so that there is consistency with how event names in
terms are handled and their prioritization of sysfs/JSON over
legacy. It may make sense to use a legacy cache event name as an event
name on a non-core PMU so we should allow it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move all implementation to pmu code. Don't allocate a fnmatch wildcard
pattern, matching ignoring the suffix already handles this, and only
use fnmatch if the given PMU name has a '*' in it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In parse_events_add_pmu, delay copying the list of terms until it is
known the list contains terms.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid passing the name of a PMU then finding it again, just directly
pass the PMU. parse_events_multi_pmu_add_or_add_pmu() is the only version
that needs to find a PMU, so move the find there. Remove the error
message as parse_events_multi_pmu_add_or_add_pmu will given an error at
the end when a name isn't either a PMU name or event name. Without the
error message being created the location in the input parameter (loc)
can be removed.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out the case of an event or PMU name followed by a slash based
term list. This is with a view to sharing the code with new legacy
hardware parsing. Use early return to reduce indentation in the code.
Make parse_events_add_pmu static now it doesn't need sharing with
parse-events.y.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a common failure mode when probing userspace C++ code (where the
mangling adds significant length to the symbol names).
Prior to this patch, only a very generic error message is produced,
making the user guess at what the issue is.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240416045533.162692-3-dima@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In several places we had
char buf[64];
...
snprintf(buf, 64, ...);
This patch changes it to
char buf[64];
...
snprintf(buf, sizeof(buf), ...);
so the "64" is only stated once.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240416045533.162692-2-dima@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hardware counter and event information could be used to help creating event
groups that better utilize hardware counters and improve multiplexing.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Link: https://lore.kernel.org/r/20240412210756.309828-2-weilin.wang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When cross-compiling perf with libelf, the following error occurred:
In file included from tests/genelf.c:14:
tests/../util/genelf.h:50:2: error: #error "unsupported architecture"
50 | #error "unsupported architecture"
| ^~~~~
tests/../util/genelf.h:59:5: warning: "GEN_ELF_CLASS" is not defined, evaluates to 0 [-Wundef]
59 | #if GEN_ELF_CLASS == ELFCLASS64
Fix this by adding GEN-ELF-ARCH and GEN-ELF-CLASS definitions for rv32.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20240415095532.4930-1-cp0613@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add weight1, weight2 and weight3 fields to -F/--fields and their aliases
like 'ins_lat', 'p_stage_cyc' and 'retire_lat'. Note that they are in
the sort keys too but the difference is that output fields will sum up
the weight values and display the average.
In the sort key, users can see the distribution of weight value and I
think it's confusing we have local vs. global weight for the same weight.
For example, I experiment with mem-loads events to get the weights. On
my laptop, it seems only weight1 field is supported.
$ perf mem record -- perf test -w noploop
Let's look at the noploop function only. It has 7 samples.
$ perf script -F event,ip,sym,weight | grep noploop
# event weight ip sym
cpu/mem-loads,ldlat=30/P: 43 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 48 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
cpu/mem-loads,ldlat=30/P: 59 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 33 55b3c122bffc noploop
cpu/mem-loads,ldlat=30/P: 38 55b3c122bffc noploop <--- same weight
When you use the 'weight' sort key, it'd show entries with a separate
weight value separately. Also note that the first entry has 3 samples
with weight value 38, so they are displayed together and the weight
value is the sum of 3 samples (114 = 38 * 3).
$ perf report -n -s +weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Weight
0.53% 3 perf perf [.] noploop 114
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
If you use 'local_weight' sort key, you can see the actual weight.
$ perf report -n -s +local_weight | grep -e Weight -e noploop
# Overhead Samples Command Shared Object Symbol Local Weight
0.53% 3 perf perf [.] noploop 38
0.18% 1 perf perf [.] noploop 59
0.18% 1 perf perf [.] noploop 48
0.18% 1 perf perf [.] noploop 43
0.18% 1 perf perf [.] noploop 33
But when you use the -F/--field option instead, you can see the average
weight for the while noploop function (as it won't group samples by
weight value and use the default 'comm,dso,sym' sort keys).
$ perf report -n -F +weight | grep -e Weight -e noploop
Warning:
--fields weight shows the average value unlike in the --sort key.
# Overhead Samples Weight1 Command Shared Object Symbol
1.23% 7 42.4 perf perf [.] noploop
The weight1 field shows the average value:
(38 * 3 + 59 + 48 + 43 + 33) / 7 = 42.4
Also it'd show the warning that 'weight' field has the average value.
Using 'weight1' can remove the warning.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like period and sample numbers, it'd be better to track weight values
and display them in the output rather than having them as sort keys.
This patch just adds a few more fields to save the weights in a hist
entry. It'll be displayed as new output fields in the later patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's strange that sort.h has the definition of struct hist_entry. As
sort.h already includes hist.h, let's move the data structure to hist.h.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240411181718.2367948-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases, the stack pointer on x86 (rsp = reg7) is used to point
variables on stack but it's not the frame base register. Then it
should handle the register like normal registers (IOW not to access
the other stack variables using offset calculation) but it should not
assume it would have a pointer.
Before:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
no pointer or no type
check variable "zc" failed (die: 0x7b9580a)
variable location: base=reg7, offset=0x40
type='struct tcp_zerocopy_receive' size=0x40 (die:0x7b947f4)
After:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
found "zc" in scope=3/3 (die: 0x7b957fc) type_offset=0x3c
variable location: base=reg7, offset=0x40
type='struct tcp_zerocopy_receive' size=0x40 (die:0x7b947f4)
Note that the type-offset was properly calculated to 0x3c as the
variable starts at 0x40.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240412183310.2518474-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In match_var_offset(), it just checked the end address of the variable
with the given offset because it assumed the register holds a pointer
to the data type and the offset starts from the base.
But I found some cases that the stack pointer (rsp = reg7) register is
used to pointer a stack variable while the frame base is maintained by a
different register (rbp = reg6). In that case, it cannot simply use the
stack pointer as it cannot guarantee that it points to the frame base.
So it needs to check both boundaries of the variable location.
Before:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
no pointer or no type
check variable "tss" failed (die: 0x7b95801)
variable location: base reg7, offset=0x110
type='struct scm_timestamping_internal' size=0x30 (die:0x7b8c126)
So the current code just checks register number for the non-PC and
non-FB registers and assuming it has offset 0. But this variable has
offset 0x110 so it should not match to this.
After:
-----------------------------------------------------------
find data type for 0x7c(reg7) at tcp_getsockopt+0xb62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
no pointer or no type
check variable "zc" failed (die: 0x7b9580a)
variable location: base=reg7, offset=0x40
type='struct tcp_zerocopy_receive' size=0x40 (die:7b947f4)
Now it find the correct variable "zc". It was located at reg7 + 0x40
and the size if 0x40 which means it should cover [0x40, 0x80). And the
access was for reg7 + 0x7c so it found the right one. But it still
failed to use the variable and it would be handled in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240412183310.2518474-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In match_var_offset(), it checks the offset range with the target type
only for non-pointer types. But it also needs to check the pointer
types with the target type.
This is because there can be more than one pointer variable located in
the same register. Let's look at the following example. It's looking
up a variable for reg3 at tcp_get_info+0x62. It found "sk" variable but
it wasn't the right one since it accesses beyond the target type (struct
'sock' in this case) size.
-----------------------------------------------------------
find data type for 0x7bc(reg3) at tcp_get_info+0x62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
offset: 1980 is bigger than size: 760
check variable "sk" failed (die: 0x7b92b2c)
variable location: reg3
type='struct sock' size=0x2f8 (die:0x7b63c3a)
Actually there was another variable "tp" in the function and it's
located at the same (reg3) because it's just type-casted like below.
void tcp_get_info(struct sock *sk, struct tcp_info *info)
{
const struct tcp_sock *tp = tcp_sk(sk);
...
The 'struct tcp_sock' contains the 'struct sock' at offset 0 so it can
just use the same address as a pointer to tcp_sock. That means it
should match variables correctly by checking the offset and size.
Actually it cannot distinguish if the offset was smaller than the size
of the original struct sock. But I think it's fine as they are the same
at that part.
So let's check the target type size and retry if it doesn't match.
Now it succeeded to find the correct variable.
-----------------------------------------------------------
find data type for 0x7bc(reg3) at tcp_get_info+0x62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
found "tp" in scope=1/1 (die: 0x7b92b16) type_offset=0x7bc
variable location: reg3
type='struct tcp_sock' size=0xa68 (die:0x7b81380)
Fixes: bc10db8eb8 ("perf annotate-data: Support stack variables")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240412183310.2518474-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To verify it found the correct variable, let's add the location
expression to the debug message.
$ perf --debug type-profile annotate --data-type
...
-----------------------------------------------------------
find data type for 0xaf0(reg15) at schedule+0xeb
CU for kernel/sched/core.c (die:0x1180523)
frame base: cfa=0 fbreg=6
found "rq" in scope=3/4 (die: 0x11b6a00) type_offset=0xaf0
variable location: reg15
type='struct rq' size=0xfc0 (die:0x11892e2)
-----------------------------------------------------------
find data type for 0x7bc(reg3) at tcp_get_info+0x62
CU for net/ipv4/tcp.c (die:0x7b5f516)
frame base: cfa=0 fbreg=6
offset: 1980 is bigger than size: 760
check variable "sk" failed (die: 0x7b92b2c)
variable location: reg3
type='struct sock' size=0x2f8 (die:0x7b63c3a)
-----------------------------------------------------------
...
The first case is fine. It looked up a data type in r15 with offset of
0xaf0 at schedule+0xeb. It found the CU die and the frame base info and
the variable "rq" was found in the scope 3/4. Its location is the r15
register and the type size is 0xfc0 which includes 0xaf0.
But the second case is not good. It looked up a data type in rbx (reg3)
with offset 0x7bc. It found a CU and the frame base which is good so
far. And it also found a variable "sk" but the access offset is bigger
than the type size (1980 vs. 760 or 0x7bc vs. 0x2f8). The variable has
the right location (reg3) but I need to figure out why it accesses
beyond what it's supposed to.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240412183310.2518474-2-namhyung@kernel.org
[ Fix the build on 32-bit by casting Dwarf_Word to (long) in pr_debug_location() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Name benchmarks with _ret at the end to avoid creating a new set of
benchmarks.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240406040911.1603801-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add shellcheck to generate-cmdlist.sh to avoid basic shell script
mistakes.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20240409023216.2342032-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch loops within dsos.c, add a version that isn't locked. Switch
some unlocked loops to hold the read lock.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move dso and dso_id functions to dso.c to match the struct declarations.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better abstract the dsos internals, introduce dsos__for_each_dso that
does a callback on each dso.
This also means the read lock can be correctly held.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move more functionality into dsos.c generally from machine.c, renaming
functions to match their new usage.
The find function is made to always "get" before returning a dso.
Reduce the scope of locks in vdso to match the locking paradigm.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move functions from machine and build-id to dsos. Pass 'struct dsos'
rather than internal state.
Rename some functions to better represent which data structure they
operate on.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some data file, I see the following messages repeated. It seems it
doesn't have DSOs in the system and the dso->binary_type is set to
DSO_BINARY_TYPE__NOT_FOUND. Let's skip them to avoid the followings.
No output from objdump --start-address=0x0000000000000000 --stop-address=0x00000000000000d4 -d --no-show-raw-insn -C "$1"
Error running objdump --start-address=0x0000000000000000 --stop-address=0x0000000000000631 -d --no-show-raw-insn -C "$1"
...
Closes: https://lore.kernel.org/linux-perf-users/15e1a2847b8cebab4de57fc68e033086aa6980ce.camel@yandex.ru/
Reported-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240410185117.1987239-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The data type profiling alone doesn't need the sample histogram for
functions. It only needs the histogram for the types.
Let's remove the condition in the report_callback to check if data type
profiling is selected and make sure the annotation has the 'struct
annotated_source' instantiated before calling symbol__disassemble().
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240411033256.2099646-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support data type profiling output on TUI.
Testing from Arnaldo:
First make sure that the debug information for your workload binaries
in embedded in them by building it with '-g' or install the debuginfo
packages, since our workload is 'find':
root@number:~# type find
find is hashed (/usr/bin/find)
root@number:~# rpm -qf /usr/bin/find
findutils-4.9.0-5.fc39.x86_64
root@number:~# dnf debuginfo-install findutils
<SNIP>
root@number:~#
Then collect some data:
root@number:~# echo 1 > /proc/sys/vm/drop_caches
root@number:~# perf mem record find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.331 MB perf.data (3982 samples) ]
root@number:~#
Finally do data-type annotation with the following command, that will
default, as 'perf report' to the --tui mode, with lines colored to
highlight the hotspots, etc.
root@number:~# perf annotate --data-type
Annotate type: 'struct predicate' (58 samples)
Percent Offset Size Field
100.00 0 312 struct predicate {
0.00 0 8 PRED_FUNC pred_func;
0.00 8 8 char* p_name;
0.00 16 4 enum predicate_type p_type;
0.00 20 4 enum predicate_precedence p_prec;
0.00 24 1 _Bool side_effects;
0.00 25 1 _Bool no_default_print;
0.00 26 1 _Bool need_stat;
0.00 27 1 _Bool need_type;
0.00 28 1 _Bool need_inum;
0.00 32 4 enum EvaluationCost p_cost;
0.00 36 4 float est_success_rate;
0.00 40 1 _Bool literal_control_chars;
0.00 41 1 _Bool artificial;
0.00 48 8 char* arg_text;
<SNIP>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240411033256.2099646-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And move the related code into util/annotate-data.c file.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240411033256.2099646-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's a pseudo data type and has no field.
Fixes: b3c95109c1 ("perf annotate-data: Add stack canary type")
Closes: https://lore.kernel.org/lkml/Zhb6jJneP36Z-or0@x1
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240411033256.2099646-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In a debug build there is validation that mmap lists are sorted when
taking a lock. In machine__update_kernel_mmap() the start and end
addresses are updated resulting in an unsorted list before the map is
removed from the list. When the map is removed, the lock is taken which
triggers the validation and the failure:
$ perf test "object code reading"
--- start ---
perf: util/maps.c:88: check_invariants: Assertion `map__start(prev) <= map__start(map)' failed.
Aborted
Fix it by updating the addresses after removal, but before insertion.
The bug depends on the ordering and type of debug info on the system and
doesn't reproduce everywhere.
Fixes: 659ad3492b ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Link: https://lore.kernel.org/r/20240410103458.813656-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than place metrics without a metric group in "No_group" place
them in a a metric group that is their name. Still allow such metrics
to be selected if "No_group" is passed, this change just impacts perf
list.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240403164636.3429091-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now symbol__annotate() is reentrant and it doesn't need to remove
non-instruction lines. Let's get rid of symbol__ensure_annotate() and
call symbol__annotate() directly. Also we can use it to get the arch
pointer instead of calling evsel__get_arch() directly.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240405211800.1412920-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For data type profiling, it removed non-instruction lines from the list
of annotation lines. It was to simplify the implementation dealing with
instructions like to calculate the PC-relative address and to search the
shortest path to the target instruction or basic block.
But it means that it removes all the comments and debug information in
the annotate output like source file name and line numbers. To support
both code annotation and data type annotation, it'd be better to keep
the non-instruction lines as well.
So this change is to skip those lines during the data type profiling
and to display them in the normal perf annotate output.
No function changes intended (other than having more lines).
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240405211800.1412920-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The recent change in the global variable handling added a bug to miss
setting the return value even if it found a data type. Also add the
type name in the debug message.
Fixes: 1ebb5e17ef ("perf annotate-data: Add get_global_var_type()")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240405211800.1412920-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I got a report for a failure in BPF verifier on a recent kernel with
perf lock contention command. It checks task->sighand->siglock without
checking if sighand is NULL or not. Let's add one.
; if (&curr->sighand->siglock == (void *)lock)
265: (79) r1 = *(u64 *)(r0 +2624) ; frame1: R0_w=trusted_ptr_task_struct(off=0,imm=0)
; R1_w=rcu_ptr_or_null_sighand_struct(off=0,imm=0)
266: (b7) r2 = 0 ; frame1: R2_w=0
267: (0f) r1 += r2
R1 pointer arithmetic on rcu_ptr_or_null_ prohibited, null-check it first
processed 164 insns (limit 1000000) max_states_per_insn 1 total_states 15 peak_states 15 mark_read 5
-- END PROG LOAD LOG --
libbpf: prog 'contention_end': failed to load: -13
libbpf: failed to load object 'lock_contention_bpf'
libbpf: failed to load BPF skeleton 'lock_contention_bpf': -13
Failed to load lock-contention BPF skeleton
lock contention BPF setup failed
lock contention did not detect any lock contention
Fixes: 1811e82767 ("perf lock contention: Track and show siglock with address")
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240409225542.1870999-1-namhyung@kernel.org
The symbol__annotate2() initializes some data structures needed by TUI.
It has a logic to prevent calling it multiple times by checking if it
has the annotated source. But data type profiling uses a different
code (symbol__annotate) to allocate the annotated lines in advance.
So TUI missed to call symbol__annotate2() when it shows the annotation
browser.
Make symbol__annotate() reentrant and handle that situation properly.
This fixes a crash in the annotation browser started by perf report in
TUI like below.
$ perf report -s type,sym --tui
# and press 'a' key and then move down
Fixes: 81e57deec3 ("perf report: Support data type profiling")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240405211800.1412920-2-namhyung@kernel.org
It's only used in 'perf annotate' output which means functions with actual
samples. No need to consume memory for every symbol ('struct annotation').
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-10-namhyung@kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: <linux-perf-users@vger.kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's only used in 'perf annotate' output which means functions with actual
samples. No need to consume memory for every symbol ('struct annotation').
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's only used in 'perf annotate' output which means functions with actual
samples. No need to consume memory for every symbol ('struct annotation').
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's only used in 'perf annotate' output which means functions with
actual samples. No need to consume memory for every symbol
('struct annotation').
Also move the 'max_line_len' field into it as it's related.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct annotated_source.offsets[] is to save pointers to
annotation_line at each offset. We can use annotated_source__get_line()
helper instead so let's get rid of the array.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some places, it checks annotated (disasm) lines for each byte. But
as it already has a list of disasm lines, it'd be better to traverse the
list entries instead of checking every offset with linear search (by
annotated_source__get_line() helper).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's a helper function to get annotation_line at the given offset
without using the offsets array. The goal is to get rid of the
offsets array altogether. It just does the linear search but I
think it's better to save memory as it won't be called in a hot
path.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found annotation__mark_jump_targets(), annotation__set_offsets()
and annotation__init_column_widths() are only used in the same file.
Let's make them static.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should pass a proper address (i.e. suitable for objdump or addr2line)
to get_srcline() in order to work correctly. It used to pass an address
with map__rip_2objdump() as the second argument but later it's changed
to use notes->start. It's ok in normal cases but it can be changed when
annotate_opts.full_addr is set. So let's convert the address directly
instead of using the notes->start.
Also the last argument is an IP to print symbol offset if requested. So
it should pass symbol-relative address.
Fixes: 7d18a824b5 ("perf annotate: Toggle full address <-> offset display")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Consolidate capstone print functions, to reduce duplication. Amend call
sites to use a file pointer for output, which is consistent with most
perf tools print functions. Add print_opts with an option to print also
the hex value of a resolved symbol+offset.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240401210925.209671-4-ak@linux.intel.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[ Added missing inttypes.h include to use PRIx64 in util/print_insn.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some older distros the build is failing due to
-Werror=maybe-uninitialized, in this case we know that this isn't the
case because 'arch' gets initialized by evsel__get_arch(), so make sure
it is initialized to NULL before returning from evsel__get_arch(), as
suggested by Ian Rogers.
E.g.:
32 17.12 opensuse:15.5 : FAIL gcc version 7.5.0 (SUSE Linux)
util/annotate.c: In function 'hist_entry__get_data_type':
util/annotate.c:2269:15: error: 'arch' may be used uninitialized in this function [-Werror=maybe-uninitialized]
struct arch *arch;
^~~~
cc1: all warnings being treated as errors
43 7.30 ubuntu:18.04-x-powerpc64el : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
util/annotate.c: In function 'hist_entry__get_data_type':
util/annotate.c:2351:36: error: 'arch' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (map__dso(ms->map)->kernel && arch__is(arch, "x86") &&
^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fUqtjxAsmdGrnkjhUTLHs-JvV10TtxyocpYDJK_+LYTiQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now it can use the capstone library to disassemble the instructions.
Let's use that (if available) for perf annotate to speed up. Currently
it only supports x86 architecture. With this change I can see ~3x speed
up in data type profiling.
But note that capstone cannot give the source file and line number info.
For now, users should use the external objdump for that by specifying
the --objdump option explicitly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The util/annotate.c code has both disassembly and sample annotation
related codes. Factor out the disasm part so that it can be handled
more easily.
No functional changes intended.
Committer notes:
Add missing include env.h, util.h, bpf-event.h and bpf-util.h to
disasm.c, to fix things like:
util/disasm.c: In function ‘symbol__disassemble_bpf’:
util/disasm.c:1203:9: error: implicit declaration of function ‘perf_exe’ [-Werror=implicit-function-declaration]
1203 | perf_exe(tpath, sizeof(tpath));
| ^~~~~~~~
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, add ins__is_nop() to check if the current instruction is NOP.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to prepare separation of disasm related code. Use the public
ins API instead of checking the internal data structure.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid open-coding that simple expression each time by moving
BYTES_TO_BITS() from the probes code to <linux/bitops.h> to export
it to the rest of the kernel.
Simplify the macro while at it. `BITS_PER_LONG / sizeof(long)` always
equals to %BITS_PER_BYTE, regardless of the target architecture.
Do the same for the tools ecosystem as well (incl. its version of
bitops.h). The previous implementation had its implicit type of long,
while the new one is int, so adjust the format literal accordingly in
the perf code.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'perf lock contention' program currently shows the caller of the locks
as __traceiter_contention_begin+0x??. This caller can be ignored, as it is
from the traceiter itself. Instead, it should show the real callers for
the locks.
When fiddling with the --stack-skip parameter, the actual callers for
the locks start to show up. However, just ignore the
__traceiter_contention_begin and the __traceiter_contention_end symbols
so the actual callers will show up.
Before this patch is applied:
sudo perf lock con -a -b -- sleep 3
contended total wait max wait avg wait type caller
8 2.33 s 2.28 s 291.18 ms rwlock:W __traceiter_contention_begin+0x44
4 2.33 s 2.28 s 582.35 ms rwlock:W __traceiter_contention_begin+0x44
7 140.30 ms 46.77 ms 20.04 ms rwlock:W __traceiter_contention_begin+0x44
2 63.35 ms 33.76 ms 31.68 ms mutex trace_contention_begin+0x84
2 46.74 ms 46.73 ms 23.37 ms rwlock:W __traceiter_contention_begin+0x44
1 13.54 us 13.54 us 13.54 us mutex trace_contention_begin+0x84
1 3.67 us 3.67 us 3.67 us rwsem:R __traceiter_contention_begin+0x44
Before this patch is applied - using --stack-skip 5
sudo perf lock con --stack-skip 5 -a -b -- sleep 3
contended total wait max wait avg wait type caller
2 2.24 s 2.24 s 1.12 s rwlock:W do_epoll_wait+0x5a0
4 1.65 s 824.21 ms 412.08 ms rwlock:W do_exit+0x338
2 824.35 ms 824.29 ms 412.17 ms spinlock get_signal+0x108
2 824.14 ms 824.14 ms 412.07 ms rwlock:W release_task+0x68
1 25.22 ms 25.22 ms 25.22 ms mutex cgroup_kn_lock_live+0x58
1 24.71 us 24.71 us 24.71 us spinlock do_exit+0x44
1 22.04 us 22.04 us 22.04 us rwsem:R lock_mm_and_find_vma+0xb0
After this patch is applied:
sudo ./perf lock con -a -b -- sleep 3
contended total wait max wait avg wait type caller
4 4.13 s 2.07 s 1.03 s rwlock:W release_task+0x68
2 2.07 s 2.07 s 1.03 s rwlock:R mm_update_next_owner+0x50
2 2.07 s 2.07 s 1.03 s rwlock:W do_exit+0x338
1 41.56 ms 41.56 ms 41.56 ms mutex cgroup_kn_lock_live+0x58
2 36.12 us 18.83 us 18.06 us rwlock:W do_exit+0x338
Signed-off-by: Anne Macedo <retpolanne@posteo.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240319143629.3422590-1-retpolanne@posteo.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This prototype is obtained indirectly, by luck, from some other header
in probe-event.c in most systems, but recently exploded on alpine:edge:
8 13.39 alpine:edge : FAIL gcc version 13.2.1 20240309 (Alpine 13.2.1_git20240309)
util/probe-event.c: In function 'convert_exec_to_group':
util/probe-event.c:225:16: error: implicit declaration of function 'basename' [-Werror=implicit-function-declaration]
225 | ptr1 = basename(exec_copy);
| ^~~~~~~~
util/probe-event.c:225:14: error: assignment to 'char *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
225 | ptr1 = basename(exec_copy);
| ^
cc1: all warnings being treated as errors
make[3]: *** [/git/perf-6.8.0/tools/build/Makefile.build:158: util] Error 2
Fix it by adding the libgen.h header where basename() is prototyped.
Fixes: fb7345bbf7 ("perf probe: Support basic dwarf-based operations on uprobe events")
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The levenshtein penalty for deleting a character was far higher than
subsituting or inserting a character. Lower the penalty to match that
of inserting a character.
Before:
$ perf recccord
perf: 'recccord' is not a perf-command. See 'perf --help'.
$
After:
$ perf recccord
perf: 'recccord' is not a perf-command. See 'perf --help'.
Did you mean this?
record
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240301201306.2680986-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing unknown command code looks for perf scripts like
perf-archive.sh and perf-iostat.sh, however, inbuilt commands aren't
suggested. Add the inbuilt commands so they may be suggested too.
Before:
$ perf reccord
perf: 'reccord' is not a perf-command. See 'perf --help'.
$
After:
$ perf reccord
perf: 'reccord' is not a perf-command. See 'perf --help'.
Did you mean this?
record
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240301201306.2680986-1-irogers@google.com
[ Added some fixes from Ian to problems I noticed while testing ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.
An example of the output:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
Committer notes:
Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dumping a perf_event_attr, use pmus to find the PMU and its name
by the type number. This allows dynamically added PMUs to be described.
Before:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24
size 136
config 0x20ff
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
After:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
However, it also means that when we have a PMU name we prefer it to a
hard coded name:
Before:
$ perf stat -vv -e faults true
...
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x2 (PERF_COUNT_SW_PAGE_FAULTS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
After:
$ perf stat -vv -e faults true
...
perf_event_attr:
type 1 (software)
size 136
config 0x2 (PERF_COUNT_SW_PAGE_FAULTS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
It feels more consistent to do this, rather than only prefer a PMU
name when a hard coded name isn't available.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"default_core" is used by jevents.py for json events' PMU name when
none is specified. On x86 the "default_core" is typically the PMU
"cpu". When creating an alias see if the event's PMU name is
"default_core" in which case don't record it. This means in places
like "perf list" the PMU's name will be used in its place.
Before:
$ perf list --details
...
cache:
l1d.replacement
[Counts the number of cache lines replaced in L1 data cache]
default_core/event=0x51,period=0x186a3,umask=0x1/
...
After:
$ perf list --details
...
cache:
l1d.replacement
[Counts the number of cache lines replaced in L1 data cache. Unit: cpu]
cpu/event=0x51,period=0x186a3,umask=0x1/
...
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracepoint id holds the config value and is probed in determining
what an event is. Add reading of the id so that we can display the
event encoding as:
$ perf list --details
...
alarmtimer:alarmtimer_cancel [Tracepoint event]
tracepoint/config=0x18c/
...
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases, it was able to find a type or location info (for per-cpu
variable) but cannot match because of invalid offset or missing global
information. In those cases, it's meaningless to go to the outer scope
and retry because there will be no additional information.
Let's change the return type of find_matching_type() and bail out if it
returns -1 for the cases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-24-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are often searched by many different places. Let's add a cache
for them to reduce the duplicate DWARF access.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-23-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the stack protector is enabled, compiler would generate code to
check stack overflow with a special value called 'stack carary' at
runtime. On x86_64, GCC hard-codes the stack canary as %gs:40.
While there's a definition of fixed_percpu_data in asm/processor.h,
it seems that the header is not included everywhere and many places
it cannot find the type info. As it's in the well-known location (at
%gs:40), let's add a pseudo stack canary type to handle it specially.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-22-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are different patterns for percpu variable access using a constant
value added to the base.
2aeb: mov -0x7da0f7e0(,%rax,8),%r14 # r14 = __per_cpu_offset[cpu]
2af3: mov $0x34740,%rax # rax = address of runqueues
* 2afa: add %rax,%r14 # r14 = &per_cpu(runqueues, cpu)
2bfd: cmpl $0x0,0x10(%r14) # cpu_rq(cpu)->has_blocked_load
2b03: je 0x2b36
At the first instruction, r14 has the __per_cpu_offset. And then rax
has an immediate value and then added to r14 to calculate the address of
a per-cpu variable. So it needs to track the immediate values and ADD
instructions.
Similar but a little different case is to use "this_cpu_off" instead of
"__per_cpu_offset" for the current CPU. This time the variable address
comes with PC-rel addressing.
89: mov $0x34740,%rax # rax = address of runqueues
* 90: add %gs:0x7f015f60(%rip),%rax # 19a78 <this_cpu_off>
98: incl 0xd8c(%rax) # cpu_rq(cpu)->sched_count
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-21-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to support per-cpu variable access often without a matching
DWARF entry. For some reason, I cannot find debug info of per-cpu
variables sometimes. They have more complex pattern to calculate the
address of per-cpu variables like below.
2b7d: mov -0x1e0(%rbp),%rax ; rax = cpu
2b84: mov -0x7da0f7e0(,%rax,8),%rcx ; rcx = __per_cpu_offset[cpu]
* 2b8c: mov 0x34870(%rcx),%rax ; *(__per_cpu_offset[cpu] + 0x34870)
Let's assume the rax register has a number for a CPU at 2b7d. The next
instruction is to get the per-cpu offset' for that cpu. The offset
-0x7da0f7e0 is 0xffffffff825f0820 in u64 which is the address of the
'__per_cpu_offset' array in my system. So it'd get the actual offset
of that CPU's per-cpu region and save it to the rcx register.
Then, at 2b8c, accesses using rcx can be handled same as the global
variable access. To handle this case, it should check if the offset
of the instruction matches to the address of '__per_cpu_offset'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-20-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like global variables, this per-cpu variables should be tracked
correctly. Factor our get_global_var_type() to handle both global
and per-cpu (for this cpu) variables in the same manner.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-19-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On x86, the kernel gets the current task using the current macro like
below:
#define current get_current()
static __always_inline struct task_struct *get_current(void)
{
return this_cpu_read_stable(pcpu_hot.current_task);
}
So it returns the current_task field of struct pcpu_hot which is the
first member. On my build, it's located at 0x32940.
$ nm vmlinux | grep pcpu_hot
0000000000032940 D pcpu_hot
And the current macro generates the instructions like below:
mov %gs:0x32940, %rcx
So the %gs segment register points to the beginning of the per-cpu
region of this cpu and it points the variable with a constant.
Let's update the instruction location info to have a segment register
and handle %gs in kernel to look up a global variable. Pretend it as
a global variable by changing the register number to DWARF_REG_PC.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-18-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a segment field in the struct annotated_insn_loc and save it for the
segment based addressing like %gs:0x28. For simplicity it now handles
%gs register only.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-17-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As instruction tracking updates the type state for each register, check
the final type info for the target register at the given instruction.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-16-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If it failed to find a variable for the location directly, it might be
due to a missing variable in the source code. For example, accessing
pointer variables in a chain can result in the case like below:
struct foo *foo = ...;
int i = foo->bar->baz;
The DWARF debug information is created for each variable so it'd have
one for 'foo'. But there's no variable for 'foo->bar' and then it
cannot know the type of 'bar' and 'baz'.
The above source code can be compiled to the follow x86 instructions:
mov 0x8(%rax), %rcx
mov 0x4(%rcx), %rdx <=== PMU sample
mov %rdx, -4(%rbp)
Let's say 'foo' is located in the %rax and it has a pointer to struct
foo. But perf sample is captured in the second instruction and there
is no variable or type info for the %rcx.
It'd be great if compiler could generate debug info for %rcx, but we
should handle it on our side. So this patch implements the logic to
iterate instructions and update the type table for each location.
As it already collected a list of scopes including the target
instruction, we can use it to construct the type table smartly.
+---------------- scope[0] subprogram
|
| +-------------- scope[1] lexical_block
| |
| | +------------ scope[2] inlined_subroutine
| | |
| | | +---------- scope[3] inlined_subroutine
| | | |
| | | | +-------- scope[4] lexical_block
| | | | |
| | | | | *** target instruction
...
Image the target instruction has 5 scopes, each scope will have its own
variables and parameters. Then it can start with the innermost scope
(4). So it'd search the shortest path from the start of scope[4] to
the target address and build a list of basic blocks. Then it iterates
the basic blocks with the variables in the scope and update the table.
If it finds a type at the target instruction, then returns it.
Otherwise, it moves to the upper scope[3]. Now it'd search the shortest
path from the start of scope[3] to the start of scope[4]. Then connect
it to the existing basic block list. Then it'd iterate the blocks with
variables for both scopes. It can repeat this until it finds a type at
the target instruction or reaches to the top scope[0].
As the basic blocks contain the shortest path, it won't worry about
branches and can update the table simply.
The final check will be done by find_matching_type() in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When updating instruction states, the call instruction should play a
role since it changes the register states. For simplicity, mark some
registers as caller-saved registers (should be arch-dependent), and
invalidate them all after a function call.
If the function returns something, the designated register (ret_reg)
will have the type info.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-14-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When updating the instruction states, it also needs to handle global
variable accesses. Same as it does for PC-relative addressing, it can
look up the type by address (if it's defined in the same file), or by
name after finding the symbol by address (for declarations).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Accessing global variable is common when it tracks execution later.
Factor out the common code into a function for later use.
It adds thread and cpumode to struct data_loc_info to find (global)
symbols if needed. Also remove var_name as it's retrieved in the
helper function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The update_insn_state() function is to update the type state table after
processing each instruction. For now, it handles MOV (on x86) insn
to transfer type info from the source location to the target.
The location can be a register or a stack slot. Check carefully when
memory reference happens and fetch the type correctly. It basically
ignores write to a memory since it doesn't change the type info. One
exception is writes to (new) stack slots for register spilling.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it collected basic block and variable information in each scope, it
now can build a state table to find matching variable at the location.
The struct type_state is to keep the type info saved in each register
and stack slot. The update_var_state() updates the table when it finds
variables in the current address. It expects die_collect_vars() filled
a list of variables with type info and starting address.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
