There are two spelling mistakes in some error messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240613073429.1797451-1-colin.i.king@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently fp-stress only covers userspace use of floating point, it does
not cover any kernel mode uses. Since currently kernel mode floating
point usage can't be preempted and there are explicit preemption points in
the existing implementations this isn't so important for fp-stress but
when we readd preemption it will be good to try to exercise it.
When the arm64 accelerated crypto operations are implemented we can
relatively straightforwardly trigger kernel mode floating point usage by
using the crypto userspace API to hash data, using the splice() support
in an effort to minimise copying. We use /proc/crypto to check which
accelerated implementations are available, picking the first symmetric
hash we find. We run the kernel mode test unconditionally, replacing the
second copy of the FPSIMD testcase for systems with FPSIMD only. If we
don't think there are any suitable kernel mode implementations we fall back
to running another copy of fpsimd-stress.
There are a number issues with this approach, we don't actually verify
that we are using an accelerated (or even CPU) implementation of the
algorithm being tested and even with attempting to use splice() to
minimise copying there are sizing limits on how much data gets spliced
at once.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240521-arm64-fp-stress-kernel-v1-1-e38f107baad4@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
While we have test coverage for the ptrace interface in our selftests
the current programs have a number of gaps. The testing is done per
regset so does not cover interactions and at no point do any of the
tests actually run the traced processes meaning that there is no
validation that anything we read or write corresponds to register values
the process actually sees. Let's add a new program which attempts to cover
these gaps.
Each test we do performs a single ptrace write. For each test we generate
some random initial register data in memory and then fork() and trace a
child. The child will load the generated data into the registers then
trigger a breakpoint. The parent waits for the breakpoint then reads the
entire child register state via ptrace, verifying that the values expected
were actually loaded by the child. It then does the write being tested
and resumes the child. Once resumed the child saves the register state
it sees to memory and executes another breakpoint. The parent uses
process_vm_readv() to get these values from the child and verifies that
the values were as expected before cleaning up the child.
We generate configurations with combinations of vector lengths and SVCR
values and then try every ptrace write which will implement the
transition we generated. In order to control execution time (especially
in emulation) we only cover the minimum and maximum VL for each of SVE
and SME, this will ensure we generate both increasing and decreasing
changes in vector length. In order to provide a baseline test we also
check the case where we resume the child without doing a ptrace write.
In order to simplify the generation of the test count for kselftest we
will report but skip a substantial number of tests that can't actually
be expressed via a single ptrace write, several times more than we
actually run. This is noisy and will add some overhead but is very much
simpler so is probably worth the tradeoff.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240122-arm64-test-ptrace-regs-v1-1-0897f822d73e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The vec-syscfg selftest verifies that setting the VL of the currently
tested vector type does not disrupt the VL of the other vector type. To do
this it records the current vector length for each type but neglects to
guard this with a check for that vector type actually being supported. Add
one, using a helper function which we also update all the other instances
of this pattern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
On failure we log the actual and expected value of the register we detect
a mismatch in. For SME one obvious potential source of corruption would be
if we had corrupted SVCR since changes in streaming mode will reset the
register values, log the value to aid in understanding issues.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231205-arm64-kselftest-log-svcr-v1-1-b77abd9ee7f3@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The za-fork test does not output a newline when reporting the result of
the one test it runs, causing the counts printed by kselftest to be
included in the test name. Add the newline.
Fixes: 266679ffd8 ("kselftest/arm64: Convert za-fork to use kselftest.h")
Cc: <stable@vger.kernel.org> # 6.4.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In the ZA and ZT test programs we explicitly validate that PSTATE.ZA is as
expected on each loop but we do not do the equivalent for our streaming
SVE test, add a check that we are still in streaming mode on every loop
in case that goes wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230922-arm64-ssve-validate-svcr-v1-1-f518960eaeda@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We just fixed an issue where changing the SVE VL while SME was active could
result in us attempting to save the streaming mode SVE vectors without any
backing storage. Add a test case which provokes that issue, ideally we
should also verify that the contents of ZA are unaffected by any of what we
did.
Note that since we need to keep streaming mode enabled we can't use any
syscalls to trigger the issue, we have to sit in a loop in usersapce and
hope to be preempted. The chosen numbers trigger with defconfig on all the
virtual platforms for me, this won't be 100% on all systems but avoid an
overcomplicated test implementation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-2-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that kselftest.h can be used with nolibc convert the za-fork test to
use it. We do still have to open code ksft_print_msg() but that's not the
end of the world. Some of the advantage comes from using printf() which we
could have been using already.
This does change the output when tests are skipped, bringing it in line
with the standard kselftest output by removing the test name - we move
from
ok 0 skipped
to
ok 1 # SKIP fork_test
The old output was not following KTAP format for skips, and the
numbering was not standard or consistent with the reported plan.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
* arm64/for-next/perf:
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event
perf: arm_spe: Use new PMSIDR_EL1 register enums
perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors
arm64/sysreg: Convert SPE registers to automatic generation
arm64: Drop SYS_ from SPE register defines
perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines
perf/marvell: Add ACPI support to TAD uncore driver
perf/marvell: Add ACPI support to DDR uncore driver
perf/arm-cmn: Reset DTM_PMU_CONFIG at probe
drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu"
drivers/perf: hisi: Simplify the parameters of hisi_pmu_init()
drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability
* for-next/sysreg:
: arm64 sysreg and cpufeature fixes/updates
KVM: arm64: Use symbolic definition for ISR_EL1.A
arm64/sysreg: Add definition of ISR_EL1
arm64/sysreg: Add definition for ICC_NMIAR1_EL1
arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK()
arm64/sysreg: Fix errors in 32 bit enumeration values
arm64/cpufeature: Fix field sign for DIT hwcap detection
* for-next/sme:
: SME-related updates
arm64/sme: Optimise SME exit on syscall entry
arm64/sme: Don't use streaming mode to probe the maximum SME VL
arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support
* for-next/kselftest: (23 commits)
: arm64 kselftest fixes and improvements
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA
kselftest/arm64: Fix enumeration of systems without 128 bit SME
kselftest/arm64: Don't require FA64 for streaming SVE tests
kselftest/arm64: Limit the maximum VL we try to set via ptrace
kselftest/arm64: Correct buffer size for SME ZA storage
kselftest/arm64: Remove the local NUM_VL definition
kselftest/arm64: Verify simultaneous SSVE and ZA context generation
kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set
kselftest/arm64: Remove spurious comment from MTE test Makefile
kselftest/arm64: Support build of MTE tests with clang
kselftest/arm64: Initialise current at build time in signal tests
kselftest/arm64: Don't pass headers to the compiler as source
kselftest/arm64: Remove redundant _start labels from FP tests
kselftest/arm64: Fix .pushsection for strings in FP tests
kselftest/arm64: Run BTI selftests on systems without BTI
kselftest/arm64: Fix test numbering when skipping tests
kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress
kselftest/arm64: Only enumerate power of two VLs in syscall-abi
...
* for-next/misc:
: Miscellaneous arm64 updates
arm64/mm: Intercept pfn changes in set_pte_at()
Documentation: arm64: correct spelling
arm64: traps: attempt to dump all instructions
arm64: Apply dynamic shadow call stack patching in two passes
arm64: el2_setup.h: fix spelling typo in comments
arm64: Kconfig: fix spelling
arm64: cpufeature: Use kstrtobool() instead of strtobool()
arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path
arm64: make ARCH_FORCE_MAX_ORDER selectable
* for-next/sme2: (23 commits)
: Support for arm64 SME 2 and 2.1
arm64/sme: Fix __finalise_el2 SMEver check
kselftest/arm64: Remove redundant _start labels from zt-test
kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps
kselftest/arm64: Add coverage of the ZT ptrace regset
kselftest/arm64: Add SME2 coverage to syscall-abi
kselftest/arm64: Add test coverage for ZT register signal frames
kselftest/arm64: Teach the generic signal context validation about ZT
kselftest/arm64: Enumerate SME2 in the signal test utility code
kselftest/arm64: Cover ZT in the FP stress test
kselftest/arm64: Add a stress test program for ZT0
arm64/sme: Add hwcaps for SME 2 and 2.1 features
arm64/sme: Implement ZT0 ptrace support
arm64/sme: Implement signal handling for ZT
arm64/sme: Implement context switching for ZT0
arm64/sme: Provide storage for ZT0
arm64/sme: Add basic enumeration for SME2
arm64/sme: Enable host kernel to access ZT0
arm64/sme: Manually encode ZT0 load and store instructions
arm64/esr: Document ISS for ZT0 being disabled
arm64/sme: Document SME 2 and SME 2.1 ABI
...
* for-next/tpidr2:
: Include TPIDR2 in the signal context
kselftest/arm64: Add test case for TPIDR2 signal frame records
kselftest/arm64: Add TPIDR2 to the set of known signal context records
arm64/signal: Include TPIDR2 in the signal context
arm64/sme: Document ABI for TPIDR2 signal information
* for-next/scs:
: arm64: harden shadow call stack pointer handling
arm64: Stash shadow stack pointer in the task struct on interrupt
arm64: Always load shadow stack pointer directly from the task struct
* for-next/compat-hwcap:
: arm64: Expose compat ARMv8 AArch32 features (HWCAPs)
arm64: Add compat hwcap SSBS
arm64: Add compat hwcap SB
arm64: Add compat hwcap I8MM
arm64: Add compat hwcap ASIMDBF16
arm64: Add compat hwcap ASIMDFHM
arm64: Add compat hwcap ASIMDDP
arm64: Add compat hwcap FPHP and ASIMDHP
* for-next/ftrace:
: Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS
arm64: avoid executing padding bytes during kexec / hibernation
arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
arm64: ftrace: Update stale comment
arm64: patching: Add aarch64_insn_write_literal_u64()
arm64: insn: Add helpers for BTI
arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT
ACPI: Don't build ACPICA with '-Os'
Compiler attributes: GCC cold function alignment workarounds
ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS
* for-next/efi-boot-mmu-on:
: Permit arm64 EFI boot with MMU and caches on
arm64: kprobes: Drop ID map text from kprobes blacklist
arm64: head: Switch endianness before populating the ID map
efi: arm64: enter with MMU and caches enabled
arm64: head: Clean the ID map and the HYP text to the PoC if needed
arm64: head: avoid cache invalidation when entering with the MMU on
arm64: head: record the MMU state at primary entry
arm64: kernel: move identity map out of .text mapping
arm64: head: Move all finalise_el2 calls to after __enable_mmu
* for-next/ptrauth:
: arm64 pointer authentication cleanup
arm64: pauth: don't sign leaf functions
arm64: unify asm-arch manipulation
* for-next/pseudo-nmi:
: Pseudo-NMI code generation optimisations
arm64: irqflags: use alternative branches for pseudo-NMI logic
arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap
arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS
arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING
arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS
The newly added zt-test program copied the pattern from the other FP
stress test programs of having a redundant _start label which is
rejected by clang, as we did in a parallel series for the other tests
remove the label so we can build with clang.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230130-arm64-fix-sme2-clang-v1-1-3ce81d99ea8f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When SVE was initially merged we chose to export the maximum VQ in the ABI
as being 512, rather more than the architecturally supported maximum of 16.
For the ptrace tests this results in us generating a lot of test cases and
hence log output which are redundant since a system couldn't possibly
support them. Instead only check values up to the current architectural
limit, plus one more so that we're covering the constraining of higher
vector lengths.
This makes no practical difference to our test coverage, speeds things up
on slower consoles and makes the output much more managable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-ptrace-max-vl-v1-1-8167f41d1ad8@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are a number of freestanding static executables used in floating
point testing that have no runtime at all. These all define the main entry
point as:
.globl _start
function _start
_start:
but clang's integrated assembler complains that:
error: symbol '_start' is already defined
due to having both a label and function directive. Remove the label to
allow building with clang.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-2-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The .pushsection directive used to store the strings used with the .puts
macro in the floating point helpers does not provide a section type but
according to the gas documentation this should be mandatory and with the
clang built in as it actually is. Provide one so that we can build these
tests with LLVM=1.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-1-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Following the pattern for the other register sets add a stress test program
for ZT0 which continually loads and verifies patterns in the register in
an effort to discover context switching problems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-14-f2fa0aef982f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As documented in issue C215 in the known issues list for DDI0487I.a [1] Arm
will be making a retroactive change to SVE to remove the possibility of
selecting non power of two vector lengths. This has no impact on existing
physical implementations but most virtual implementations have implemented
the full range of permissible vector lengths. Given how demanding fp-stress
is for these implementations update to only attempt to enumerate the power
of two vector lengths, reducing the load created on existing virtual
implementations and only exercising the functionality that will be seen in
physical implementations.
[1] https://developer.arm.com/documentation/102105/ia-00/
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221220-arm64-fp-stress-pow2-v1-1-d0ce756b57af@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When everything is starting up we are likely to have a lot of child
processes producing output at once. This means that we can reduce
overhead a bit by allowing epoll_wait() to return more than one
descriptor at once, it cuts down on the number of system calls we need
to do which on virtual platforms where the syscall overhead is a bit
more noticable and we're likely to have a lot more children active can
make a small but noticable difference.
On physical platforms the relatively small number of processes being run
and vastly improved speeds push the effects of this change into the
noise.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now we hold execution of the stress test programs until all children are
started there is no need to drain output while that is happening.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
At present fp-stress has a bit of a thundering herd problem since the
children it spawns start running immediately, meaning that they can start
starving the parent process of CPU before it has even started all the
children. This is much more severe on virtual platforms since they tend to
support far more SVE and SME vector lengths, be slower in general and for
some have issues with performance when simulating multiple CPUs.
We can mitigate this problem by having all the child processes block before
starting the test program, meaning that we at least have all the child
processes started before we start heavily using CPU. We still have the same
load issues while waiting for the actual stress test programs to start up
and produce output but they're at least all ready to go before that kicks
in, resulting in substantial reductions in overall runtime on some of the
severely affected systems. One test was showing about 20% improvement.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Since we now flush output immediately on starting children we should ensure
that the child name is set beforehand so that any output that does get
flushed from the newly created child has the name of the child attached.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221124120722.150988-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Especially when the test is configured to run for a longer time it can be
reassuring to users to see that the supervising program is running OK so
provide a message every second when the output timer expires.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221017144553.773176-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently we don't have an explicit check that when it's been a second
since we have seen output produced from the test programs starting up that
means all of them are running and we should start both sending signals and
timing out. This is not reliable, especially on very heavily loaded systems
where the test programs might take longer than a second to run.
We do skip sending signals to children that have not produced output yet
so we won't cause them to exit unexpectedly by sending a signal but this
can create confusion when interpreting output, for example appearing to
show the tests running for less time than expected or appearing to show
missed signal deliveries. Avoid issues by explicitly checking that we have
seen output from all the child processes before we start sending signals
or counting test run time.
This is especially likely on virtual platforms with large numbers of vector
lengths supported since the platforms are slow and there will be a lot of
tasks per CPU.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221017144553.773176-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently we treat any error when reading from the child as a failure and
don't read any more output from that child as a result. This ignores the
fact that it is valid for read() to return EINTR as the error code if there
is a signal pending so we could stop handling the output of children,
especially during exit when we will get some SIGCHLD signals delivered to
us. Fix this by pulling the read handling out into a separate function
which returns a flag if reads should be continued and wrapping it in a
loop.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Once we have started exiting the termination handler will have the same
effect as what we're already running so set the termination flag at that
point.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When fp-stress gets a termination signal it sets a flag telling itself to
exit and sends a termination signal to all the children. If the flag is set
then don't bother repeating this process, it isn't going to accomplish
anything other than consume CPU time which can be an issue when running in
emulation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220921181345.618085-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the stress test programs for floating point context switching are
run by hand, there are extremely simplistic harnesses which run some copies
of each test individually but they are not integrated into kselftest and
with SVE and SME they only run with whatever vector length the process has
by default. This is hassle when running the tests and means that they're
not being run at all by CI systems picking up kselftest.
In order to improve our coverage and provide a more convenient interface
provide a harness program which starts enough stress test programs up to
cause context switching and runs them for a set period. If only FPSIMD is
available in the system we start two copies of the FPSIMD stress test per
CPU, otherwise we start one copy of the FPSIMD and then start the SVE,
streaming SVE and ZA tests once per CPU for each available VL they have
to run on. We then run for a set period monitoring for any errors
reported by the test programs before cleanly terminating them.
In order to provide additional coverage of signal handling and some extra
noise in the scheduling we send a SIGUSR2 to the stress tests once a
second, the tests will count the number of signals they get.
Since kselftest is generally expected to run quickly we by default only run
for ten seconds. This is enough to show if there is anything cripplingly
wrong but not exactly a thorough soak test, for interactive and more
focused use a command line option -t N is provided which overrides the
length of time to run for (specified in seconds) and if 0 is specified then
there is no timeout and the test must be manually terminated. The timeout
is counted in seconds with no output, this is done to account for the
potentially slow startup time for the test programs on virtual platforms
which tend to struggle during startup as they are both slow and tend to
support a wide range of vector lengths.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To interface more robustly with other processes install the signal handers
in the floating point stress tests before we produce any output, this
means that a parent process can know that if it has seen any output from
the test then the test is ready to handle incoming signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220906220056.820295-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the floating point stress tests mostly support testing that the
data they are checking can be disrupted from a signal handler triggered by
SIGUSR1. This is not properly implemented for all the tests and in testing
is frequently modified to just handle the signal without corrupting data in
order to ensure that signal handling does not corrupt data. Directly support
this usage by installing a SIGUSR2 handler which simply counts the signal
delivery.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since we now have an explicit test for the syscall ABI there is no need for
za-test to cover getpid() so just unconditionally do sched_yield() like we
do in fpsimd-test.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154452.824870-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the arm64 floating point tests don't support out of tree builds
due to two quirks of the kselftest build system. One is that when building
a program from multiple files we shouldn't separately compile the main
program to an object file as that will result in the pattern rule not
matching when adjusted for the output directory. The other is that we also
need to include $(OUTPUT) in the names of the binaries when specifying the
dependencies in order to ensure that they get picked up with O=.
Rewrite the dependencies for the executables to fix these issues. The
kselftest build system will ensure OUTPUT is always defined.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We provide a couple of object files with helpers linked into several of
the test programs, ensure they are cleaned.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some of the rules in lib.mk use a top_srcdir variable to figure out where
the top of the kselftest tree is, provide it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The kselftest lib.mk provides a default all target which builds additional
programs from TEST_GEN_PROGS_EXTENDED, use that rather than using
TEST_PROGS_EXTENDED which is for programs that don't need to be built like
shell scripts. Leave fpsimd-stress and sve-stress there since they are
scripts.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a small testcase that attempts to do a clone() with ZA enabled and
verifies that it remains enabled with the same contents. We only check
one word in one horizontal vector of ZA since there's already other tests
that check for data corruption more broadly, we're just looking to make
sure that ZA is still enabled and it looks like the data got copied.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220419112247.711548-40-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add some basic coverage for the ZA ptrace interface, including walking
through all the vector lengths supported in the system. Unlike SVE
doing syscalls does not discard the ZA state so when we set data in ZA
we run the child process briefly, having it add one to each byte in ZA
in order to validate that both the vector size and data are being read
and written as expected when the process runs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-38-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to allow ptrace of streaming mode SVE registers we have added a
new regset for streaming mode which in isolation offers the same ABI as
regular SVE with a different vector type. Add this to the array of regsets
we handle, together with additional tests for the interoperation of the
two regsets.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-37-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a stress test for context switching of the ZA register state based on
the similar tests Dave Martin wrote for FPSIMD and SVE registers. The test
loops indefinitely writing a data pattern to ZA then reading it back and
verifying that it's what was expected.
Unlike the other tests we manually assemble the SME instructions since at
present no released toolchain has SME support integrated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-35-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
One of the features of SME is the addition of streaming mode, in which we
have access to a set of streaming mode SVE registers at the SME vector
length. Since these are accessed using the SVE instructions let's reuse
the existing SVE stress test for testing with a compile time option for
controlling the few small differences needed:
- Enter streaming mode immediately on starting the program.
- In streaming mode FFR is removed so skip reading and writing FFR.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-33-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Provide RDVL helpers for SME and extend the main vector configuration tests
to cover SME.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-32-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Scalable Matrix Extenions (SME) introduces additional register state
with configurable vector lengths, similar to SVE but configured separately.
Extend vlset to support configuring this state with a --sme or -s command
line option.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-30-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As for the kernel so that we don't have ambitious toolchain requirements
to build the tests manually encode some of the SVE instructions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-29-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we validate that we can set the floating point state via the SVE
regset and read the data via the FPSIMD regset but we do not valiate that
the opposite case works as expected. Add a test that covers this case,
noting that when reading via SVE regset the kernel has the option of
returning either SVE or FPSIMD data so we need to accept both formats.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the sve-ptrace test for setting and reading FPSIMD data assumes
that the child will start off in FPSIMD only mode and that it can use this
to read some FPSIMD mode SVE ptrace data, skipping the test if it can't.
This isn't an assumption guaranteed by the ABI and also limits how we can
use this testcase within the program. Instead skip the initial read and
just generate a FPSIMD format buffer for the write part of the test, making
the coverage more robust in the face of future kernel and test program
changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The comment for ptrace_sve_get_fpsimd_data() doesn't describe what the test
does at all, fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
