Use the kselftest_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-9-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kvm_test_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-8-thuth@redhat.com
[sean: make host_cap static]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the kvm_test_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-7-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The sync_regs test currently does not have any output (unless one
of the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftest_harness.h / kvm_test_harness.h
interface.
To be able to use the interface, we have to break up the huge main()
function here in more fine grained parts - then we can use the new
KVM_ONE_VCPU_TEST() macro to define the individual tests. Since these
are run with a separate VM now, we have also to make sure to create
the expected state at the beginning of each test, so some parts grow
a little bit - which should be OK considering that the individual
tests are more self-contained now.
Suggested-by: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-6-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The regs structure just accidentally contains the right values
from the previous test in the spot where we want to change rbx.
It's cleaner if we properly initialize the structure here before
using it.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-3-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In the spots where we are expecting a successful run, we should
use vcpu_run() instead of _vcpu_run() to make sure that the run
did not fail.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-2-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If the relevant capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present
then re-map vcpu_info using the HVA part way through the tests to make sure
then there is no functional change.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-16-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Using the HVA of the shared_info page is more efficient, so if the
capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present use that method
to do the mapping.
NOTE: Have the juggle_shinfo_state() thread map and unmap using both
GFN and HVA, to make sure the older mechanism is not broken.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-15-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Although the fixed counter 3 and its exclusive pseudo slots event are
not supported by KVM yet, the architectural slots event is supported by
KVM and can be programmed on any GP counter. Thus add validation for this
architectural slots event.
Top-down slots event "counts the total number of available slots for an
unhalted logical processor, and increments by machine-width of the
narrowest pipeline as employed by the Top-down Microarchitecture
Analysis method."
As for the slot, it's an abstract concept which indicates how many
uops (decoded from instructions) can be processed simultaneously
(per cycle) on HW. In Top-down Microarchitecture Analysis (TMA) method,
the processor is divided into two parts, frond-end and back-end. Assume
there is a processor with classic 5-stage pipeline, fetch, decode,
execute, memory access and register writeback. The former 2 stages
(fetch/decode) are classified to frond-end and the latter 3 stages are
classified to back-end.
In modern Intel processors, a complicated instruction would be decoded
into several uops (micro-operations) and so these uops can be processed
simultaneously and then improve the performance. Thus, assume a
processor can decode and dispatch 4 uops in front-end and execute 4 uops
in back-end simultaneously (per-cycle), so the machine-width of this
processor is 4 and this processor has 4 topdown slots per-cycle.
If a slot is spare and can be used to process a new upcoming uop, then
the slot is available, but if a uop occupies a slot for several cycles
and can't be retired (maybe blocked by memory access), then this slot is
stall and unavailable.
Considering the testing instruction sequence can't be macro-fused on x86
platforms, the measured slots count should not be less than
NUM_INSNS_RETIRED. Thus assert the slots count against NUM_INSNS_RETIRED.
pmu_counters_test passed with this patch on Intel Sapphire Rapids.
About the more information about TMA method, please refer the below link.
https://www.intel.com/content/www/us/en/docs/vtune-profiler/cookbook/2023-0/top-down-microarchitecture-analysis-method.html
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240218043003.2424683-1-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop dirty_log_page_splitting_test's assertion that the number of 4KiB
pages remains the same across dirty logging being enabled and disabled, as
the test doesn't guarantee that mappings outside of the memslots being
dirty logged are stable, e.g. KVM's mappings for code and pages in
memslot0 can be zapped by things like NUMA balancing.
To preserve the spirit of the check, assert that (a) the number of 4KiB
pages after splitting is _at least_ the number of 4KiB pages across all
memslots under test, and (b) the number of hugepages before splitting adds
up to the number of pages across all memslots under test. (b) is a little
tenuous as it relies on memslot0 being incompatible with transparent
hugepages, but that holds true for now as selftests explicitly madvise()
MADV_NOHUGEPAGE for memslot0 (__vm_create() unconditionally specifies the
backing type as VM_MEM_SRC_ANONYMOUS).
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Tao Su <tao1.su@linux.intel.com>
Link: https://lore.kernel.org/r/20240131222728.4100079-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM sets up Hyper-V TSC page clocksource for its guests when system
clocksource is 'based on TSC' (see gtod_is_based_on_tsc()), running
hyperv_clock with any other clocksource leads to imminent failure.
Add the missing requirement to make the test skip gracefully.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-5-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Despite its name, system_has_stable_tsc() just checks that system
clocksource is 'tsc'; this can now be done with generic
sys_clocksource_is_tsc().
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the read/write PMU counters subtest to verify that RDPMC also reads
back the written value. Opportunsitically verify that attempting to use
the "fast" mode of RDPMC fails, as the "fast" flag is only supported by
non-architectural PMUs, which KVM doesn't virtualize.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-30-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the PMC counters test to use forced emulation to verify that KVM
emulates counter events for instructions retired and branches retired.
Force emulation for only a subset of the measured code to test that KVM
does the right thing when mixing perf events with emulated events.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-27-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the KVM_FEP definition, a.k.a. the KVM force emulation prefix, into
processor.h so that it can be used for other tests besides the MSR filter
test.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-26-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to detect KVM support for forced emulation by querying the
module param, and use the helper to detect support for the MSR filtering
test instead of throwing a noodle/NOP at KVM to see if it sticks.
Cc: Aaron Lewis <aaronlewis@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-25-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to probe KVM's "enable_pmu" param, open coding strings in
multiple places is just asking for false negatives and/or runtime errors
due to typos.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-23-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Expand the PMU counters test to verify that LLC references and misses have
non-zero counts when the code being executed while the LLC event(s) is
active is evicted via CFLUSH{,OPT}. Note, CLFLUSH{,OPT} requires a fence
of some kind to ensure the cache lines are flushed before execution
continues. Use MFENCE for simplicity (performance is not a concern).
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-22-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the fixed counters test to verify that supported counters can
actually be enabled in the control MSRs, that unsupported counters cannot,
and that enabled counters actually count.
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
[sean: fold into the rd/wr access test, massage changelog]
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-21-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the PMU counters test to verify KVM emulation of fixed counters in
addition to general purpose counters. Fixed counters add an extra wrinkle
in the form of an extra supported bitmask. Thus quoth the SDM:
fixed-function performance counter 'i' is supported if ECX[i] || (EDX[4:0] > i)
Test that KVM handles a counter being available through either method.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test to verify that KVM correctly emulates MSR-based accesses to
general purpose counters based on guest CPUID, e.g. that accesses to
non-existent counters #GP and accesses to existent counters succeed.
Note, for compatibility reasons, KVM does not emulate #GP when
MSR_P6_PERFCTR[0|1] is not present (writes should be dropped).
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the PMU counters test to validate architectural events using fixed
counters. The core logic is largely the same, the biggest difference
being that if a fixed counter exists, its associated event is available
(the SDM doesn't explicitly state this to be true, but it's KVM's ABI and
letting software program a fixed counter that doesn't actually count would
be quite bizarre).
Note, fixed counters rely on PERF_GLOBAL_CTRL.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test cases to verify that Intel's Architectural PMU events work as
expected when they are available according to guest CPUID. Iterate over a
range of sane PMU versions, with and without full-width writes enabled,
and over interesting combinations of lengths/masks for the bit vector that
enumerates unavailable events.
Test up to vPMU version 5, i.e. the current architectural max. KVM only
officially supports up to version 2, but the behavior of the counters is
backwards compatible, i.e. KVM shouldn't do something completely different
for a higher, architecturally-defined vPMU version. Verify KVM behavior
against the effective vPMU version, e.g. advertising vPMU 5 when KVM only
supports vPMU 2 shouldn't magically unlock vPMU 5 features.
According to Intel SDM, the number of architectural events is reported
through CPUID.0AH:EAX[31:24] and the architectural event x is supported
if EBX[x]=0 && EAX[31:24]>x.
Handcode the entirety of the measured section so that the test can
precisely assert on the number of instructions and branches retired.
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a PMU library for x86 selftests to help eliminate open-coded event
encodings, and to reduce the amount of copy+paste between PMU selftests.
Use the new common macro definitions in the existing PMU event filter test.
Cc: Aaron Lewis <aaronlewis@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add vcpu_set_cpuid_property() helper function for setting properties, and
use it instead of open coding an equivalent for MAX_PHY_ADDR. Future vPMU
testcases will also need to stuff various CPUID properties.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When X86_FEATURE_INVTSC is missing, guest_test_msrs_access() was supposed
to skip testing dependent Hyper-V invariant TSC feature. Unfortunately,
'continue' does not lead to that as stage is not incremented. Moreover,
'vm' allocated with vm_create_with_one_vcpu() is not freed and the test
runs out of available file descriptors very quickly.
Fixes: bd827bd775 ("KVM: selftests: Test Hyper-V invariant TSC control")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Delete the AMX's tests "stage" counter, as the counter is no longer used,
which makes clang unhappy:
x86_64/amx_test.c:224:6: error: variable 'stage' set but not used
int stage, ret;
^
1 error generated.
Note, "stage" was never really used, it just happened to be dumped out by
a (failed) assertion on run->exit_reason, i.e. the AMX test has no concept
of stages, the code was likely copy+pasted from a different test.
Fixes: c96f57b080 ("KVM: selftests: Make vCPU exit reason test assertion common")
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20240109220302.399296-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231206170241.82801-12-ajones@ventanamicro.com
[sean: keep the newline in the "tsc\n" strncmp()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework the NX hugepage test's skip message regarding the magic token to
provide all of the necessary magic, and to very explicitly recommended
using the wrapper shell script.
Opportunistically remove an overzealous newline; splitting the
recommendation message across two lines of ~45 characters makes it much
harder to read than running out a single line to 98 characters.
Link: https://lore.kernel.org/r/20231129224042.530798-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmWW8gYSHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5sGUP/iadHMz7Up1X29IDGtq58LRORNVXp2Ln
2dqoj8IKZeSr+mPMw2GvZyuiLqVPMs4Et21WJfCO7HgKd/NPMDORwRndhJYweFRY
yk+5NJLvXYuo8UR3b2QYy8XUghEqP+j5eYyon6UdCiPACcBGTpgoj4pU7SLM7l4T
EOge42ya5YxD/1oWr5vyifNrOJCPNTBYcC0as5//+RdnmQYqYZ26Z73b0B8Pdct4
XMWwgoKlmLTmei0YntXtGaDGimCvTYP8EPM4tOWgiBSWMhQXWbAh/0biDfd3eZVO
Hoe4HvstdjUNbpO3h3Zo78Ob7ehk4kx/6r0nlQnz5JxzGnuDjYCDIVUlYn0mw5Yi
nu4ztr8M3VRksDbpmAjSO9XFEKIYxlYQfzZ1UuTy8ehdBYTDl/3lPAbh2ApUYE72
Tt2PXmFGz2j1sjG38Gh94s48Za5OxHoVlfq8iGhU4v7UjuxnMNHfExOWd66SwZgx
5tZkr4rj/pWt21wr7jaVqFGzuftIC5G4ZEBhh7JcW89oamFrykgQUu5z4dhBMO75
G7DAVh9eSH2SKkmJH1ClXriveazTK7fqMx8sZzzRnusMz09qH7SIdjSzmp7H5utw
pWBfatft0n0FTI1r+hxGueiJt7dFlrIz0Q4hHyBN4saoVH121bZioc0pq1ob6MIk
Y2Ou4xJBt14F
=bjfs
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-hyperv-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 Hyper-V changes for 6.8:
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
The "vmxon_pa == vmcs12_pa == -1ull" test happens to work by accident: as
Enlightened VMCS is always supported, set_default_vmx_state() adds
'KVM_STATE_NESTED_EVMCS' to 'flags' and the following branch of
vmx_set_nested_state() is executed:
if ((kvm_state->flags & KVM_STATE_NESTED_EVMCS) &&
(!guest_can_use(vcpu, X86_FEATURE_VMX) ||
!vmx->nested.enlightened_vmcs_enabled))
return -EINVAL;
as 'enlightened_vmcs_enabled' is false. In fact, "vmxon_pa == vmcs12_pa ==
-1ull" is a valid state when not tainted by wrong flags so the test should
aim for this branch:
if (kvm_state->hdr.vmx.vmxon_pa == INVALID_GPA)
return 0;
Test all this properly:
- Without KVM_STATE_NESTED_EVMCS in the flags, the expected return value is
'0'.
- With KVM_STATE_NESTED_EVMCS flag (when supported) set, the expected
return value is '-EINVAL' prior to enabling eVMCS and '0' after.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-11-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In preparation for conditional Hyper-V emulation enablement in KVM, make
Hyper-V specific tests skip gracefully instead of failing when KVM support
for emulating Hyper-V is not there.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-10-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Swap the ordering of parameters to guest asserts related to {RD,WR}MSR
success/failure in the Hyper-V features test. As is, the output will
be mangled and broken due to passing an integer as a string and vice
versa.
Opportunistically fix a benign %u vs. %lu issue as well.
Link: https://lore.kernel.org/r/20231129224916.532431-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert %llx to %lx as appropriate in guest asserts. The guest printf
implementation treats them the same as KVM selftests are 64-bit only, but
strictly adhering to the correct format will allow annotating the
underlying helpers with __printf() without introducing new warnings in the
build.
Link: https://lore.kernel.org/r/20231129224916.532431-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Print out the test and vector as intended when a guest assert fails an
assertion regarding MONITOR/MWAIT faulting. Unfortunately, the guest
printf support doesn't detect such issues at compile-time, so the bug
manifests as a confusing error message, e.g. in the most confusing case,
the test complains that it got vector "0" instead of expected vector "0".
Fixes: 0f52e4aaa6 ("KVM: selftests: Convert the MONITOR/MWAIT test to use printf guest asserts")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231107182159.404770-1-seanjc@google.com
Link: https://lore.kernel.org/r/20231129224916.532431-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove x86's mmio_warning_test, as it is unnecessarily complex (there's no
reason to fork, spawn threads, initialize srand(), etc..), unnecessarily
restrictive (triggering triple fault is not unique to Intel CPUs without
unrestricted guest), and provides no meaningful coverage beyond what
basic fuzzing can achieve (running a vCPU with garbage is fuzzing's bread
and butter).
That the test has *all* of the above flaws is not coincidental, as the
code was copy+pasted almost verbatim from the syzkaller reproducer that
originally found the KVM bug (which has long since been fixed).
Cc: Michal Luczaj <mhal@rbox.co>
Link: https://groups.google.com/g/syzkaller/c/lHfau8E3SOE
Link: https://lore.kernel.org/r/20230815220030.560372-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pass MAGIC_TOKEN to __TEST_REQUIRE() when printing the help message about
needing to pass a magic value to manually run the NX hugepages test,
otherwise the help message will contain garbage.
In file included from x86_64/nx_huge_pages_test.c:15:
x86_64/nx_huge_pages_test.c: In function ‘main’:
include/test_util.h:40:32: error: format ‘%d’ expects a matching ‘int’ argument [-Werror=format=]
40 | ksft_exit_skip("- " fmt "\n", ##__VA_ARGS__); \
| ^~~~
x86_64/nx_huge_pages_test.c:259:9: note: in expansion of macro ‘__TEST_REQUIRE’
259 | __TEST_REQUIRE(token == MAGIC_TOKEN,
| ^~~~~~~~~~~~~~
Signed-off-by: angquan yu <angquan21@gmail.com>
Link: https://lore.kernel.org/r/20231128221105.63093-1-angquan21@gmail.com
[sean: rewrite shortlog+changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
"Testing private access when memslot gets deleted" tests the behavior
of KVM when a private memslot gets deleted while the VM is using the
private memslot. When KVM looks up the deleted (slot = NULL) memslot,
KVM should exit to userspace with KVM_EXIT_MEMORY_FAULT.
In the second test, upon a private access to non-private memslot, KVM
should also exit to userspace with KVM_EXIT_MEMORY_FAULT.
Intentionally don't take a requirement on KVM_CAP_GUEST_MEMFD,
KVM_CAP_MEMORY_FAULT_INFO, KVM_MEMORY_ATTRIBUTE_PRIVATE, etc., as it's a
KVM bug to advertise KVM_X86_SW_PROTECTED_VM without its prerequisites.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: call out the similarities with set_memory_region_test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-36-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a selftest to exercise implicit/explicit conversion functionality
within KVM and verify:
- Shared memory is visible to host userspace
- Private memory is not visible to host userspace
- Host userspace and guest can communicate over shared memory
- Data in shared backing is preserved across conversions (test's
host userspace doesn't free the data)
- Private memory is bound to the lifetime of the VM
Ideally, KVM's selftests infrastructure would be reworked to allow backing
a single region of guest memory with multiple memslots for _all_ backing
types and shapes, i.e. ideally the code for using a single backing fd
across multiple memslots would work for "regular" memory as well. But
sadly, support for KVM_CREATE_GUEST_MEMFD has languished for far too long,
and overhauling selftests' memslots infrastructure would likely open a can
of worms, i.e. delay things even further.
In addition to the more obvious tests, verify that PUNCH_HOLE actually
frees memory. Directly verifying that KVM frees memory is impractical, if
it's even possible, so instead indirectly verify memory is freed by
asserting that the guest reads zeroes after a PUNCH_HOLE. E.g. if KVM
zaps SPTEs but doesn't actually punch a hole in the inode, the subsequent
read will still see the previous value. And obviously punching a hole
shouldn't cause explosions.
Let the user specify the number of memslots in the private mem conversion
test, i.e. don't require the number of memslots to be '1' or "nr_vcpus".
Creating more memslots than vCPUs is particularly interesting, e.g. it can
result in a single KVM_SET_MEMORY_ATTRIBUTES spanning multiple memslots.
To keep the math reasonable, align each vCPU's chunk to at least 2MiB (the
size is 2MiB+4KiB), and require the total size to be cleanly divisible by
the number of memslots. The goal is to be able to validate that KVM plays
nice with multiple memslots, being able to create a truly arbitrary number
of memslots doesn't add meaningful value, i.e. isn't worth the cost.
Intentionally don't take a requirement on KVM_CAP_GUEST_MEMFD,
KVM_CAP_MEMORY_FAULT_INFO, KVM_MEMORY_ATTRIBUTE_PRIVATE, etc., as it's a
KVM bug to advertise KVM_X86_SW_PROTECTED_VM without its prerequisites.
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-32-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "vm_shape" structure to encapsulate the selftests-defined "mode",
along with the KVM-defined "type" for use when creating a new VM. "mode"
tracks physical and virtual address properties, as well as the preferred
backing memory type, while "type" corresponds to the VM type.
Taking the VM type will allow adding tests for KVM_CREATE_GUEST_MEMFD
without needing an entirely separate set of helpers. At this time,
guest_memfd is effectively usable only by confidential VM types in the
form of guest private memory, and it's expected that x86 will double down
and require unique VM types for TDX and SNP guests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmU8EugSHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5xS0P+gPTDO81CUZO70LrO2W4E7toRBf/F9x1
/v5D/76p9hG32Z6+BJs/xxDxJFagw75MtoR5oKivtXiip3TxbfOyDOlaQkIRo85E
/d95il/LRidL3Mv3TXRj1lykXnxSSz9tigAGEZti1Y9Fn9fXEIwurJH7dU5cBI1E
fin5bsDaTNRjG4jjTiEUbnKPRTlD/S7CQJn4CaYvZhMv/eJkYDLyBBVy4VLoLzvD
ctL6VJQLGPVxbxr9mEmulaqMrSuDIQQLkRVQJAViKyerBInTEc5d/GPCHuE8O3zi
0r/QSJbMS9titWLz07NhJ1UH4VJNyaEhRlyJPSFhBW4h6dzUb3EXdUe0Hwa+JH/S
H2cVqsANItTCIhvDtuEGIRDahu0eD+63h90InJ0gEVL1kSJS+UWZHB71PkUEQgAV
2OsuT1D26fuxrv+0b9ioBZURycqKw++zGsrwyVhe77eBgqBJ12tbL4TAD+QNjaQ5
HZTCe6YV83gZoOMeVkoTGSf96s9lGORgxsaAIXmFuLB9RVCVXhVh0ph2HZsnV8Hw
ZXEXpBEFo7GUhb0NIvsk2W73QL87A3fLv15yITWc8KuC7/dXP9z6KpSKjFySS69X
uWD1MVx6shhvbg97UzoJlXc3/z0aVzmdZJudE5d0gcFvAjIItqp6ICPOoKxfj8pT
tqRZu3kVHd61
=sfp8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.7' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.7:
- Add CONFIG_KVM_MAX_NR_VCPUS to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
- Add IBPB and SBPB virtualization support.
- Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
- Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
- Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
- Use octal notation for file permissions through KVM x86.
- Fix a handful of typo fixes and warts.
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
-----BEGIN PGP SIGNATURE-----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=LJ3q
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.6-fixes' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes for 6.6:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
Extend x86's state to forcefully load *all* host-supported xfeatures by
modifying xstate_bv in the saved state. Stuffing xstate_bv ensures that
the selftest is verifying KVM's full ABI regardless of whether or not the
guest code is successful in getting various xfeatures out of their INIT
state, e.g. see the disaster that is/was MPX.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand x86's state test to load XSAVE state into a "dummy" vCPU prior to
KVM_SET_CPUID2, and again with an empty guest CPUID model. Except for
off-by-default features, i.e. AMX, KVM's ABI for KVM_SET_XSAVE is that
userspace is allowed to load xfeatures so long as they are supported by
the host. This is a regression test for a combination of KVM bugs where
the state saved by KVM_GET_XSAVE{2} could not be loaded via KVM_SET_XSAVE
if the saved xstate_bv would load guest-unsupported xfeatures.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify support XSAVE state in the "state test's" guest code so that saving
and loading state via KVM_{G,S}ET_XSAVE actually does something useful,
i.e. so that xstate_bv in XSAVE state isn't empty.
Punt on BNDCSR for now, it's easier to just stuff that xfeature from the
host side.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Verify the following behavior holds true for writes and reads of HWCR from
host userspace:
* Attempts to set bits 3, 6, or 8 are ignored
* Bits 18 and 24 are the only bits that can be set
* Any bit that can be set can also be cleared
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20230929230246.1954854-4-jmattson@google.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Delete inaccurate descriptions and obsolete metadata for test cases.
It adds zero value, and has a non-zero chance of becoming stale and
misleading in the future. No functional changes intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230914094803.94661-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----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=dHTQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM: x86: Selftests changes for 6.6:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
Explicitly set the exception vector to #UD when potentially injecting an
exception in sync_regs_test's subtests that try to detect TOCTOU bugs
in KVM's handling of exceptions injected by userspace. A side effect of
the original KVM bug was that KVM would clear the vector, but relying on
KVM to clear the vector (i.e. make it #DE) makes it less likely that the
test would ever find *new* KVM bugs, e.g. because only the first iteration
would run with a legal vector to start.
Explicitly inject #UD for race_events_inj_pen() as well, e.g. so that it
doesn't inherit the illegal 255 vector from race_events_exc(), which
currently runs first.
Link: https://lore.kernel.org/r/20230817233430.1416463-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reload known good vCPU state if the vCPU triple faults in any of the
race_sync_regs() subtests, e.g. if KVM successfully injects an exception
(the vCPU isn't configured to handle exceptions). On Intel, the VMCS
is preserved even after shutdown, but AMD's APM states that the VMCB is
undefined after a shutdown and so KVM synthesizes an INIT to sanitize
vCPU/VMCB state, e.g. to guard against running with a garbage VMCB.
The synthetic INIT results in the vCPU never exiting to userspace, as it
gets put into Real Mode at the reset vector, which is full of zeros (as is
GPA 0 and beyond), and so executes ADD for a very, very long time.
Fixes: 60c4063b47 ("KVM: selftests: Extend x86's sync_regs_test to check for event vector races")
Cc: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230817233430.1416463-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test to ensure that setting both generic and fixed performance
event filters does not affect the consistency of the fixed event filter
behavior in KVM.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-7-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add tests to cover that pmu event_filter works as expected when it's
applied to fixed performance counters, even if there is none fixed
counter exists (e.g. Intel guest pmu version=1 or AMD guest).
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Link: https://lore.kernel.org/r/20230810090945.16053-6-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test cases to verify the handling of unsupported input values for the
PMU event filter. The tests cover unsupported "action" values, unsupported
"flags" values, and unsupported "nevents" values. All these cases should
return an error, as they are currently not supported by the filter.
Furthermore, the tests also cover the case where setting non-existent
fixed counters in the fixed bitmap does not fail.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Link: https://lore.kernel.org/r/20230810090945.16053-5-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add custom "__kvm_pmu_event_filter" structure to improve pmu event
filter settings. Simplifies event filter setup by organizing event
filter parameters in a cleaner, more organized way.
Alternatively, selftests could use a struct overlay ala vcpu_set_msr()
to avoid dynamically allocating the array:
struct {
struct kvm_msrs header;
struct kvm_msr_entry entry;
} buffer = {};
memset(&buffer, 0, sizeof(buffer));
buffer.header.nmsrs = 1;
buffer.entry.index = msr_index;
buffer.entry.data = msr_value;
but the extra layer added by the nested structs is counterproductive
to writing efficient, clean code.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-4-cloudliang@tencent.com
[sean: massage changelog to explain alternative]
Signed-off-by: Sean Christopherson <seanjc@google.com>
None of the callers consume remove_event(), and it incorrectly implies
that the incoming filter isn't modified. Drop the return.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-3-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the param-based guest assert macros and enable the printf versions
for all selftests. Note! This change can affect tests even if they
don't use directly use guest asserts! E.g. via library code, or due to
the compiler making different optimization decisions.
Link: https://lore.kernel.org/r/20230729003643.1053367-33-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's VMX PMU capabilities test to use printf-based guest asserts.
Opportunstically add a helper to do the WRMSR+assert so as to reduce the
amount of copy+paste needed to spit out debug information.
Link: https://lore.kernel.org/r/20230729003643.1053367-31-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's nested SVM software interrupt injection test to use printf-
based guest asserts. Opportunistically use GUEST_ASSERT() and
GUEST_FAIL() in a few locations to spit out more debug information.
Link: https://lore.kernel.org/r/20230729003643.1053367-28-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's nested exceptions test to printf-based guest asserts, and
use REPORT_GUEST_ASSERT() instead of TEST_FAIL() so that output is
formatted correctly.
Link: https://lore.kernel.org/r/20230729003643.1053367-26-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's MONITOR/MWAIT test to use printf-based guest asserts. Add a
macro to handle reporting failures to reduce the amount of copy+paste
needed for MONITOR vs. MWAIT.
Link: https://lore.kernel.org/r/20230729003643.1053367-25-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's Hyper-V feature test to use print-based guest asserts.
Opportunistically use the EQ and NE variants in a few places to capture
additional information.
Link: https://lore.kernel.org/r/20230729003643.1053367-23-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's CPUID test to use printf-based GUEST_ASSERT_EQ() so that
the test prints out debug information. Note, the test previously used
REPORT_GUEST_ASSERT_2(), but that was pointless because none of the
guest-side code passed any parameters to the assert.
Link: https://lore.kernel.org/r/20230729003643.1053367-21-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There is already an ASSERT_EQ macro in the file
tools/testing/selftests/kselftest_harness.h, so currently KVM selftests
can't include test_util.h from the KVM selftests together with that file.
Rename the macro in the KVM selftests to TEST_ASSERT_EQ to avoid the
problem - it is also more similar to the other macros in test_util.h that
way.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230712075910.22480-2-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Attempt to set the to-be-queued exception to be both pending and injected
_after_ KVM_CAP_SYNC_REGS's kvm_vcpu_ioctl_x86_set_vcpu_events() squashes
the pending exception (if there's also an injected exception). Buggy KVM
versions will eventually yell loudly about having impossible state when
processing queued excpetions, e.g.
WARNING: CPU: 0 PID: 1115 at arch/x86/kvm/x86.c:10095 kvm_check_and_inject_events+0x220/0x500 [kvm]
arch/x86/kvm/x86.c:kvm_check_and_inject_events():
WARN_ON_ONCE(vcpu->arch.exception.injected &&
vcpu->arch.exception.pending);
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230728001606.2275586-3-mhal@rbox.co
[sean: split to separate patch, massage changelog and comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Attempt to modify the to-be-injected exception vector to an illegal value
_after_ the sanity checks performed by KVM_CAP_SYNC_REGS's
arch/x86/kvm/x86.c:kvm_vcpu_ioctl_x86_set_vcpu_events(). Buggy KVM
versions will eventually yells loudly about attempting to inject a bogus
vector, e.g.
WARNING: CPU: 0 PID: 1107 at arch/x86/kvm/x86.c:547 kvm_check_and_inject_events+0x4a0/0x500 [kvm]
arch/x86/kvm/x86.c:exception_type():
WARN_ON(vector > 31 || vector == NMI_VECTOR)
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230728001606.2275586-3-mhal@rbox.co
[sean: split to separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Attempt to modify vcpu->run->s.regs _after_ the sanity checks performed by
KVM_CAP_SYNC_REGS's arch/x86/kvm/x86.c:sync_regs(). This can lead to some
nonsensical vCPU states accompanied by kernel splats, e.g. disabling PAE
while long mode is enabled makes KVM all kinds of confused:
WARNING: CPU: 0 PID: 1142 at arch/x86/kvm/mmu/paging_tmpl.h:358 paging32_walk_addr_generic+0x431/0x8f0 [kvm]
arch/x86/kvm/mmu/paging_tmpl.h:
KVM_BUG_ON(is_long_mode(vcpu) && !is_pae(vcpu), vcpu->kvm)
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230728001606.2275586-3-mhal@rbox.co
[sean: see link]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add coverage to x86's set_sregs_test to verify KVM rejects vendor-agnostic
illegal CR0 values, i.e. CR0 values whose legality doesn't depend on the
current VMX mode. KVM historically has neglected to reject bad CR0s from
userspace, i.e. would happily accept a completely bogus CR0 via
KVM_SET_SREGS{2}.
Punt VMX specific subtests to future work, as they would require quite a
bit more effort, and KVM gets coverage for CR0 checks in general through
other means, e.g. KVM-Unit-Tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add a test for splitting and reconstituting hugepages during and after
dirty logging
- Add support for CPU pinning in demand paging test
- Generate dependency files so that partial rebuilds work as expected
- Misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=Wwws
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.5:
- Add a test for splitting and reconstituting hugepages during and after
dirty logging
- Add support for CPU pinning in demand paging test
- Generate dependency files so that partial rebuilds work as expected
- Misc cleanups and fixes
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Fix a longstanding bug in the reporting of the number of entries returned by
KVM_GET_CPUID2
- Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=D0BH
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.5' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.5:
* Move handling of PAT out of MTRR code and dedup SVM+VMX code
* Fix output of PIC poll command emulation when there's an interrupt
* Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
* Misc cleanups
Keep switching between LAPIC_MODE_X2APIC and LAPIC_MODE_DISABLED during
APIC map construction to hunt for TOCTOU bugs in KVM. KVM's optimized map
recalc makes multiple passes over the list of vCPUs, and the calculations
ignore vCPU's whose APIC is hardware-disabled, i.e. there's a window where
toggling LAPIC_MODE_DISABLED is quite interesting.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230602233250.1014316-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Verify that KVM reports the actual number of CPUID entries on success, but
doesn't touch the userspace struct on failure (which for better or worse,
is KVM's ABI).
Link: https://lore.kernel.org/r/20230526210340.2799158-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test for page splitting during dirty logging and for hugepage
recovery after dirty logging.
Page splitting represents non-trivial behavior, which is complicated
by MANUAL_PROTECT mode, which causes pages to be split on the first
clear, instead of when dirty logging is enabled.
Add a test which makes assertions about page counts to help define the
expected behavior of page splitting and to provide needed coverage of the
behavior. This also helps ensure that a failure in eager page splitting
is not covered up by splitting in the vCPU path.
Tested by running the test on an Intel Haswell machine w/wo
MANUAL_PROTECT.
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Link: https://lore.kernel.org/r/20230131181820.179033-3-bgardon@google.com
[sean: let the user run without hugetlb, as suggested by Paolo]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor the nested TSC scaling test's check on a stable system TSC to
use TEST_REQUIRE() to do the heavy lifting when the system doesn't have
a stable TSC. Using a helper+TEST_REQUIRE() eliminates the need for
gotos and a custom message.
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20230406001724.706668-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Don't advertisze XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
- Overhaul the AMX selftests to improve coverage and cleanup the test
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=BY10
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM selftests, and an AMX/XCR0 bugfix, for 6.4:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
- Overhaul the AMX selftests to improve coverage and cleanup the test
- Misc cleanups
Add testing for the event "Instructions retired" (0xc0) in the PMU
event filter on both Intel and AMD to ensure that the event doesn't
count when it is disallowed. Unlike most of the other events, the
event "Instructions retired" will be incremented by KVM when an
instruction is emulated. Test that this case is being properly handled
and that KVM doesn't increment the counter when that event is
disallowed.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230307141400.1486314-6-aaronlewis@google.com
Link: https://lore.kernel.org/r/20230407233254.957013-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use a single struct to track all PMC event counts in the PMU filter test,
and copy the full struct to/from the guest when running and measuring each
guest workload. Using a common struct avoids naming conflicts, e.g. the
loads/stores testcase has claimed "perf_counter", and eliminates the
unnecessary truncation of the counter values when they are propagated from
the guest MSRs to the host structs.
Zero the struct before running the guest workload to ensure that the test
doesn't get a false pass due to consuming data from a previous run.
Link: https://lore.kernel.org/r/20230407233254.957013-6-seanjc@google.com
Reviewed by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use '0' to signal success and '-errno' to signal failure in the PMU event
filter test so that the values are slightly less magical/arbitrary. Using
'0' in the error paths is especially confusing as understanding it's an
error value requires following the breadcrumbs to the host code that
ultimately consumes the value.
Arguably there should also be a #define for "success", but 0/-errno is a
common enough pattern that defining another macro on top would likely do
more harm than good.
Link: https://lore.kernel.org/r/20230407233254.957013-5-seanjc@google.com
Reviewed by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Provide the actual vs. expected count in the PMU event filter test's
asserts instead of relying on pr_info() to provide the context, e.g. so
that all information needed to triage a failure is readily available even
if the environment in which the test is run captures only the assert
itself.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: rewrite changelog]
Link: https://lore.kernel.org/r/20230407233254.957013-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helper macros to consolidate the asserts that a PMC is/isn't counting
(branch) instructions retired. This will make it easier to add additional
asserts related to counting instructions later on.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: add "INSTRUCTIONS", massage changelog]
Link: https://lore.kernel.org/r/20230407233254.957013-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Split out the common parts of the Intel and AMD guest code in the PMU
event filter test into a helper function. This is in preparation for
adding additional counters to the test.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230407233254.957013-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check both architectural rules and KVM's ABI for KVM_GET_SUPPORTED_CPUID
to ensure the supported xfeatures[1] don't violate any of them.
The architectural rules[2] and KVM's contract with userspace ensure for a
given feature, e.g. sse, avx, amx, etc... their associated xfeatures are
either all sets or none of them are set, and any dependencies are enabled
if needed.
[1] EDX:EAX of CPUID.(EAX=0DH,ECX=0)
[2] SDM vol 1, 13.3 ENABLING THE XSAVE FEATURE SET AND XSAVE-ENABLED
FEATURES
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: expand comments, use a fancy X86_PROPERTY]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add all known XFEATURE masks to processor.h to make them more broadly
available in KVM selftests. Relocate and clean up the exiting AMX (XTILE)
defines in processor.h, e.g. drop the intermediate define and use BIT_ULL.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Take the XFeature mask in __vm_xsave_require_permission() instead of the
bit so that there's no need to define macros for both the bit and the
mask. Asserting that only a single bit is set and retrieving said bit
is easy enough via log2 helpers.
Opportunistically clean up the error message for the
ARCH_REQ_XCOMP_GUEST_PERM sanity check.
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The instructions XGETBV and XSETBV are useful to other tests. Move
them to processor.h to make them more broadly available.
No functional change intended.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
[sean: reword shortlog]
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Tested-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230405004520.421768-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Verify that disabling the guest's vPMU via CPUID also disables LBRs.
KVM has had at least one bug where LBRs would remain enabled even though
the intent was to disable everything PMU related.
Link: https://lore.kernel.org/r/20230311004618.920745-22-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework the LBR format test to use the bitfield instead of a separate
mask macro, mainly so that adding a nearly-identical PEBS format test
doesn't have to copy-paste-tweak the macro too.
No functional change intended.
Link: https://lore.kernel.org/r/20230311004618.920745-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM disallows changing PERF_CAPABILITIES after KVM_RUN, expand
the host side checks to verify KVM rejects any attempts to change bits
from userspace.
Link: https://lore.kernel.org/r/20230311004618.920745-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Test that the guest can't write 0 to PERF_CAPABILITIES, can't write the
current value, and can't toggle _any_ bits. There is no reason to special
case the LBR format.
Link: https://lore.kernel.org/r/20230311004618.920745-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add negative testing of all immutable bits in PERF_CAPABILITIES, i.e.
single bits that are reserved-0 or are effectively reserved-1 by KVM.
Omit LBR and PEBS format bits from the test as it's easier to test them
manually than it is to add safeguards to the comment path, e.g. toggling
a single bit can yield a format of '0', which is legal as a "disable"
value.
Link: https://lore.kernel.org/r/20230311004618.920745-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
