Add a new user option to memslot_modification_stress_test to allow testing
with slot zap quirk KVM_X86_QUIRK_SLOT_ZAP_ALL disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021206.13923-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update set_memory_region_test to make sure memslot move and deletion
function correctly both when slot zap quirk KVM_X86_QUIRK_SLOT_ZAP_ALL is
enabled and disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021119.13904-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test to verify that userspace can't change a vCPU's x2APIC ID by
abusing KVM_SET_LAPIC. KVM models the x2APIC ID (and x2APIC LDR) as
readonly, and silently ignores userspace attempts to change the x2APIC ID
for backwards compatibility.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: write changelog, add to existing test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240802202941.344889-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZrVPUBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFoCrAP9ZGQ1M7GdCe4Orm6Ex4R4OMVcz
MWMrFCVM73rnSoCbMwEA7le7M8c+X5i/4oqFOPm/fEr1i5RZT512RL5lc7MxBQ8=
=DG57
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.11, round #1
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
The ID register for S1PIE is ID_AA64MMFR3_EL1.S1PIE which is bits 11:8 but
get-reg-list uses a shift of 4, checking SCTLRX instead. Use a shift of 8
instead.
Fixes: 5f0419a008 ("KVM: selftests: get-reg-list: add Permission Indirection registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240731-kvm-arm64-fix-s1pie-test-v1-1-a9253f3b7db4@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Fix compile error introduced by commit d27c34a735 ("KVM: riscv:
selftests: Add some Zc* extensions to get-reg-list test"). These
4 lines should be end with ";".
Fixes: d27c34a735 ("KVM: riscv: selftests: Add some Zc* extensions to get-reg-list test")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20240726084931.28924-5-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
walkers") is known to cause a performance regression
(https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff).
Yu has a fix which I'll send along later via the hotfixes branch.
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability of
cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of the
zeropage in MAP_SHARED mappings. I don't see any runtime effects here -
more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of
higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the
series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has
simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Is anyone reading this stuff? If so, email me!
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large folio
userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's self
testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are
"mm: memcg: separate legacy cgroup v1 code and put under config
option" and
"mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of excessive
correctable memory errors. In order to permit userspace to monitor and
handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from migrate
folio" teaches the kernel to appropriately handle migration from
poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare
refcount increments. So these paes can first be moved aside if they
reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps
for much faster reading of vma information. The series is "query VMAs
from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance Yang
improves the kernel's presentation of developer information related to
multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and not
very useful feature from slab fault injection.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA
joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3
xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8=
=z0Lf
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
* Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
* Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
* Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
* FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
* New command-line parameter to control the WFx trap behavior under KVM
* Introduce kCFI hardening in the EL2 hypervisor
* Fixes + cleanups for handling presence/absence of FEAT_TCRX
* Miscellaneous fixes + documentation updates
LoongArch:
* Add paravirt steal time support.
* Add support for KVM_DIRTY_LOG_INITIALLY_SET.
* Add perf kvm-stat support for loongarch.
RISC-V:
* Redirect AMO load/store access fault traps to guest
* perf kvm stat support
* Use guest files for IMSIC virtualization, when available
ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA
extensions is coming through the RISC-V tree.
s390:
* Assortment of tiny fixes which are not time critical
x86:
* Fixes for Xen emulation.
* Add a global struct to consolidate tracking of host values, e.g. EFER
* Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
* Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
* Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
* Drop MTRR virtualization, and instead always honor guest PAT on CPUs
that support self-snoop.
* Update to the newfangled Intel CPU FMS infrastructure.
* Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
* Misc cleanups
x86 - MMU:
* Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support.
* Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't
hold leafs SPTEs.
* Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager
page splitting, to avoid stalling vCPUs when splitting huge pages.
* Bug the VM instead of simply warning if KVM tries to split a SPTE that is
non-present or not-huge. KVM is guaranteed to end up in a broken state
because the callers fully expect a valid SPTE, it's all but dangerous
to let more MMU changes happen afterwards.
x86 - AMD:
* Make per-CPU save_area allocations NUMA-aware.
* Force sev_es_host_save_area() to be inlined to avoid calling into an
instrumentable function from noinstr code.
* Base support for running SEV-SNP guests. API-wise, this includes
a new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges.
This includes basic support for attestation guest requests, enough to
say that KVM supports the GHCB 2.0 specification.
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys. To support
fetching certificate data from userspace, a new KVM exit type will be
needed to handle fetching the certificate from userspace. An attempt to
define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle
this was introduced in v1 of this patchset, but is still being discussed
by community, so for now this patchset only implements a stub version
of SNP Extended Guest Requests that does not provide certificate data.
x86 - Intel:
* Remove an unnecessary EPT TLB flush when enabling hardware.
* Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
* KVM: x86: Suppress MMIO that is triggered during task switch emulation
Explicitly suppress userspace emulated MMIO exits that are triggered when
emulating a task switch as KVM doesn't support userspace MMIO during
complex (multi-step) emulation. Silently ignoring the exit request can
result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to
userspace for some other reason prior to purging mmio_needed.
See commit 0dc902267c ("KVM: x86: Suppress pending MMIO write exits if
emulator detects exception") for more details on KVM's limitations with
respect to emulated MMIO during complex emulator flows.
Generic:
* Rename the AS_UNMOVABLE flag that was introduced for KVM to AS_INACCESSIBLE,
because the special casing needed by these pages is not due to just
unmovability (and in fact they are only unmovable because the CPU cannot
access them).
* New ioctl to populate the KVM page tables in advance, which is useful to
mitigate KVM page faults during guest boot or after live migration.
The code will also be used by TDX, but (probably) not through the ioctl.
* Enable halt poll shrinking by default, as Intel found it to be a clear win.
* Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
* Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
* Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
* Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
Selftests:
* Remove dead code in the memslot modification stress test.
* Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
* Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
* Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaZQB0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkZwf/bv2jiENaLFNGPe/VqTKMQ6PHQLMG
+sNHx6fJPP35gTM8Jqf0/7/ummZXcSuC1mWrzYbecZm7Oeg3vwNXHZ4LquwwX6Dv
8dKcUzLbWDAC4WA3SKhi8C8RV2v6E7ohy69NtAJmFWTc7H95dtIQm6cduV2osTC3
OEuHe1i8d9umk6couL9Qhm8hk3i9v2KgCsrfyNrQgLtS3hu7q6yOTR8nT0iH6sJR
KE5A8prBQgLmF34CuvYDw4Hu6E4j+0QmIqodovg2884W1gZQ9LmcVqYPaRZGsG8S
iDdbkualLKwiR1TpRr3HJGKWSFdc7RblbsnHRvHIZgFsMQiimh4HrBSCyQ==
=zepX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267c ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
* Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension.
* Zimop and Zcmop for may-be-operations.
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension.
* Zawrs,
* riscv,cpu-intc is now dtschema.
* A handful of performance improvements and cleanups to text patching.
* Support for memory hot{,un}plug
* The highest user-allocatable virtual address is now visible in
hwprobe.
-----BEGIN PGP SIGNATURE-----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=+ICi
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
- Remove dead code in the memslot modification stress test.
- Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
- Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
- Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
-----BEGIN PGP SIGNATURE-----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=zg8U
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM selftests for 6.11
- Remove dead code in the memslot modification stress test.
- Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
- Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
- Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmaRub0ACgkQOlYIJqCj
N/2LMxAArGzhcWZ6Qdo2aMRaMIPtSBJHmbEgEuHvHMumgsTZQzDcn9cxDi/hNSrc
l8ODOwAM2qNcq95YfwjU7F0ae3E+HRzGvKcBnmZWuQeCDp2HhVEoCphFu1sHst+t
XEJTL02b6OgyJUEU3h40mYk12eiq2S4FCnFYXPCqijwwuL6Y5KQvvTqek3c2/SDn
c+VneutYGax/S0GiiCkYh4wrwWh9g7qm0IX70ycBwJbW5qBFKgyglvHxvL8JLJC9
Nkkw/p2657wcOdraH+fOBuRy2dMwE5fv++1tOjWwB5WAAhSOJPZh0BGYvgA2yfN7
OE+k7APKUQd9Xxtud8H3LrTPoyMA4hz2sdDFyqrrWK9yjpBY7zXNyN50Fxi7VVsm
T8nTIiKAGyRbjotY+m7krXQPXjfZYhVqrJ/jtxESOZLZ93q2gSWU2p/ZXpUPVHnH
+YOBAI1owP3wepaYlrthtI4LQx9lF422dnmeSflztfKFGabRbQZxg3uHMCCxIaGc
lJ6CD546+D45f/uBXRDMqk//qFTqXhKUbDk9sutmU/C2oWufMwW0R8kOyItGPyvk
9PP1vd8vSsIHj+tpwg+i04jBqYDaAcPBOcTZaHm9SYYP+1e11Uu5Vjep37JL1bkA
xJWxnDZOCGcfKQi2jkh51HJ/dOAHXY1GQKMfyAoPQOSonYHvGVY=
=Cf2R
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----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=BalU
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZpTCAxccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFjChAQCWs9ucJag4USgvXpg5mo9sxzly
kBZZ1o49N/VLxs4cagEAtq3KVNQNQyGXelYH6gr20aI85j6VnZW5W5z+sy5TAgk=
=sSOt
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.11
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
* kvm-arm64/ctr-el0:
: Support for user changes to CTR_EL0, courtesy of Sebastian Ott
:
: Allow userspace to change the guest-visible value of CTR_EL0 for a VM,
: so long as the requested value represents a subset of features supported
: by hardware. In other words, prevent the VMM from over-promising the
: capabilities of hardware.
:
: Make this happen by fitting CTR_EL0 into the existing infrastructure for
: feature ID registers.
KVM: selftests: Assert that MPIDR_EL1 is unchanged across vCPU reset
KVM: arm64: nv: Unfudge ID_AA64PFR0_EL1 masking
KVM: selftests: arm64: Test writes to CTR_EL0
KVM: arm64: rename functions for invariant sys regs
KVM: arm64: show writable masks for feature registers
KVM: arm64: Treat CTR_EL0 as a VM feature ID register
KVM: arm64: unify code to prepare traps
KVM: arm64: nv: Use accessors for modifying ID registers
KVM: arm64: Add helper for writing ID regs
KVM: arm64: Use read-only helper for reading VM ID registers
KVM: arm64: Make idregs debugfs iterator search sysreg table directly
KVM: arm64: Get sys_reg encoding from descriptor in idregs_debug_show()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Andrew Jones <ajones@ventanamicro.com> says:
Zawrs provides two instructions (wrs.nto and wrs.sto), where both are
meant to allow the hart to enter a low-power state while waiting on a
store to a memory location. The instructions also both wait an
implementation-defined "short" duration (unless the implementation
terminates the stall for another reason). The difference is that while
wrs.sto will terminate when the duration elapses, wrs.nto, depending on
configuration, will either just keep waiting or an ILL exception will be
raised. Linux will use wrs.nto, so if platforms have an implementation
which falls in the "just keep waiting" category (which is not expected),
then it should _not_ advertise Zawrs in the hardware description.
Like wfi (and with the same {m,h}status bits to configure it), when
wrs.nto is configured to raise exceptions it's expected that the higher
privilege level will see the instruction was a wait instruction, do
something, and then resume execution following the instruction. For
example, KVM does configure exceptions for wfi (hstatus.VTW=1) and
therefore also for wrs.nto. KVM does this for wfi since it's better to
allow other tasks to be scheduled while a VCPU waits for an interrupt.
For waits such as those where wrs.nto/sto would be used, which are
typically locks, it is also a good idea for KVM to be involved, as it
can attempt to schedule the lock holding VCPU.
This series starts with Christoph's addition of the riscv
smp_cond_load_relaxed function which applies wrs.sto when available.
That patch has been reworked to use wrs.nto and to use the same approach
as Arm for the wait loop, since we can't have arbitrary C code between
the load-reserved and the wrs. Then, hwprobe support is added (since the
instructions are also usable from usermode), and finally KVM is
taught about wrs.nto, allowing guests to see and use the Zawrs
extension.
We still don't have test results from hardware, and it's not possible to
prove that using Zawrs is a win when testing on QEMU, not even when
oversubscribing VCPUs to guests. However, it is possible to use KVM
selftests to force a scenario where we can prove Zawrs does its job and
does it well. [4] is a test which does this and, on my machine, without
Zawrs it takes 16 seconds to complete and with Zawrs it takes 0.25
seconds.
This series is also available here [1]. In order to use QEMU for testing
a build with [2] is needed. In order to enable guests to use Zawrs with
KVM using kvmtool, the branch at [3] may be used.
[1] https://github.com/jones-drew/linux/commits/riscv/zawrs-v3/
[2] https://lore.kernel.org/all/20240312152901.512001-2-ajones@ventanamicro.com/
[3] https://github.com/jones-drew/kvmtool/commits/riscv/zawrs/
[4] cb2beccebc
Link: https://lore.kernel.org/r/20240426100820.14762-8-ajones@ventanamicro.com
* b4-shazam-merge:
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
KVM RISC-V allows the Zawrs extension for the Guest/VM, so add it
to the get-reg-list test.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240426100820.14762-14-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmaOS6UWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImehejD/9pACGe3h3krXLcFVWXOFIu5Hpc
5kQLP0lSPJ/o5Xs8t/oPLrnDX70z90wXI1LOmltc7h32MSwFa2l8COQh+sN5eJBQ
PNyt7u7bMipp0yJS4Gl3LQQ5vklcGOSpQc/gbeXnVx8J/tz+Mo9YGGLIXVRXRM6W
Ri8D2VVFiwzQQYeTpPo1u1Ob8C6mA4KOppwvhscMTM3vj4NMbsinBzRnR0lG0Tdw
meFhxDPly1Ksxsbnj9UGO6UnEY0A2SLONs6MiO4y4DtoqoDlw/lbqFJuYo4vvbx1
pxtjyirD/PX/wjslQFWUOuU0hMfAodera+JupZ5BZWfcG8FltA4DQfDsm/U9RjK/
7gGNnr8Xk2/tp6+4AVV+HU2iTgRvq+mXCL72zSy2Y4r7ElBAANDfk4n+Zn/PWisn
U9wwV8Ue7tVB15BRpRsg77NzBidiCFEe/6flWYiX2y24ke71gwDJBGUy8hMdKt6t
4Cq8atsU0MvDAzfYMsK9JjskJp4UFq6wb1tXbbuADM4TDhnzlK6s6h3vM+pFlh/f
my7fDH8/2qsCWhBDM4pmsJskVp+I1GOk/80RjTQISwx7iHktJWvxNYTaisK2fvD5
Qs1IUWfNFbDX0Lr0QpN6j6X4rZkghR4R6XoFkd4nkicwi+UHVn3oK9GSqv24QJn9
7+Ev3dfRTUYLd6mC4Q==
=DpIK
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
- Redirect AMO load/store access fault traps to guest
- Perf kvm stat support for RISC-V
- Use HW IMSIC guest files when available
-----BEGIN PGP SIGNATURE-----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=atJQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.11-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.11
- Redirect AMO load/store access fault traps to guest
- Perf kvm stat support for RISC-V
- Use guest files for IMSIC virtualization, when available
ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA
extensions is coming through the RISC-V tree.
Add a test case to exercise KVM_PRE_FAULT_MEMORY and run the guest to access the
pre-populated area. It tests KVM_PRE_FAULT_MEMORY ioctl for KVM_X86_DEFAULT_VM
and KVM_X86_SW_PROTECTED_VM.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <32427791ef42e5efaafb05d2ac37fa4372715f47.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Centralize the _GNU_SOURCE definition to CFLAGS in lib.mk. Remove
redundant defines from Makefiles that import lib.mk. Convert any usage of
"#define _GNU_SOURCE 1" to "#define _GNU_SOURCE".
This uses the form "-D_GNU_SOURCE=", which is equivalent to
"#define _GNU_SOURCE".
Otherwise using "-D_GNU_SOURCE" is equivalent to "-D_GNU_SOURCE=1" and
"#define _GNU_SOURCE 1", which is less commonly seen in source code and
would require many changes in selftests to avoid redefinition warnings.
Link: https://lkml.kernel.org/r/20240625223454.1586259-2-edliaw@google.com
Signed-off-by: Edward Liaw <edliaw@google.com>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kees Cook <kees@kernel.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test if KVM emulates the APIC bus clock at the expected frequency when
userspace configures the frequency via KVM_CAP_X86_APIC_BUS_CYCLES_NS.
Set APIC timer's initial count to the maximum value and busy wait for 100
msec (largely arbitrary) using the TSC. Read the APIC timer's "current
count" to calculate the actual APIC bus clock frequency based on TSC
frequency.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/2fccf35715b5ba8aec5e5708d86ad7015b8d74e6.1718214999.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add udelay() for x86 tests to allow busy waiting in the guest for a
specific duration, and to match ARM and RISC-V's udelay() in the hopes
of eventually making udelay() available on all architectures.
Get the guest's TSC frequency using KVM_GET_TSC_KHZ and expose it to all
VMs via a new global, guest_tsc_khz. Assert that KVM_GET_TSC_KHZ returns
a valid frequency, instead of simply skipping tests, which would require
detecting which tests actually need/want udelay(). KVM hasn't returned an
error for KVM_GET_TSC_KHZ since commit cc578287e3 ("KVM: Infrastructure
for software and hardware based TSC rate scaling"), which predates KVM
selftests by 6+ years (KVM_GET_TSC_KHZ itself predates KVM selftest by 7+
years).
Note, if the GUEST_ASSERT() in udelay() somehow fires and the test doesn't
check for guest asserts, then the test will fail with a very cryptic
message. But fixing that, e.g. by automatically handling guest asserts,
is a much larger task, and practically speaking the odds of a test afoul
of this wart are infinitesimally small.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/5aa86285d1c1d7fe1960e3fe490f4b22273977e6.1718214999.git.reinette.chatre@intel.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently the PMU counters test does a single CLFLUSH{,OPT} on the loop's
code, but due to speculative execution this might not cause LLC misses
within the measured section.
Instead of doing a single flush before the loop, do a cache flush on each
iteration of the loop to confuse the prediction and ensure that at least
one cache miss occurs within the measured section.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[sean: keep MFENCE, massage changelog]
Link: https://lore.kernel.org/r/20240628005558.3835480-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tweak the macros in the PMU counters test to prepare for moving the
CLFLUSH+MFENCE instructions into the loop body, to fix an issue where
a single CLFUSH doesn't guarantee an LLC miss.
Link: https://lore.kernel.org/r/20240628005558.3835480-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Print the guest's random seed during VM creation if and only if the seed
has changed since the seed was last printed. The vast majority of tests,
if not all tests at this point, set the seed during test initialization
and never change the seed, i.e. printing it every time a VM is created is
useless noise.
Snapshot and print the seed during early selftest init to play nice with
tests that use the kselftests harness, at the cost of printing an unused
seed for tests that change the seed during test-specific initialization,
e.g. dirty_log_perf_test. The kselftests harness runs each testcase in a
separate process that is forked from the original process before creating
each testcase's VM, i.e. waiting until first VM creation will result in
the seed being printed by each testcase despite it never changing. And
long term, the hope/goal is that setting the seed will be handled by the
core framework, i.e. that the dirty_log_perf_test wart will naturally go
away.
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240627021756.144815-2-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
commit 606af8293c ("KVM: selftests: arm64: Test vCPU-scoped feature ID
registers") intended to test that MPIDR_EL1 is unchanged across vCPU
reset but failed at actually doing so.
Add the missing assertion.
Link: https://lore.kernel.org/r/20240621225045.2472090-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
* Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
* Allow getting/setting MSRs for SEV-ES guests, if they're using the pre-6.9
KVM_SEV_ES_INIT API.
* Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old routing
table requested that.
Generic:
* Avoid __fls(0)
* Fix reference leak on hwpoisoned page
* Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
* Fix bug in __kvm_handle_hva_range() where KVM calls a function pointer
that was intended to be a marker only (nothing bad happens but kind of
a mine and also technically undefined behavior)
* Do not bother accounting allocations that are small and freed before
getting back to userspace.
Selftests:
* Fix compilation for RISC-V.
* Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
* Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZ1sNwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO8Rwf/ZH+zVOkKdrA0XT71nToc9AkqObPO
mBpV5p+E4boVHSWNQgY7R0yu1ViLc+HotTYf7MoQGeobm60YtDkWHlxcKrQD672C
cLRdl02iRRDGMTRAhpr9jvT/yMHB5kYDxEYmO44nPJKwodcb4/4RJQpt8wyslT2G
uUDpnYMFmSZ8/Zt7IznSEcSx1D+4WFqLT2AZPsJ55w45BFiI+5uRQ/kRaM9iM0+r
yuOQCCK3+pV4CqA+ckbZ6j6+RufcovjEdYCoxLQDOdK6tQTD9aqwJFQ/o2tc+fJT
Hj1MRRsqmdOePdjguBMsfDrEnjXoBveAt96BVheavbpC1UaWp5n0r8p2sA==
=Egkk
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
Test that CTR_EL0 is modifiable from userspace, that changes are
visible to guests, and that they are preserved across a vCPU reset.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The KVM_SET_BOOT_CPU_ID ioctl missed to reject invalid vCPU IDs. Verify
this no longer works and gets rejected with an appropriate error code.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-6-minipli@grsecurity.net
[sean: add test for MAX_VCPU_ID+1, always do negative test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The KVM_CREATE_VCPU ioctl ABI had an implicit integer truncation bug,
allowing 2^32 aliases for a vCPU ID by setting the upper 32 bits of a 64
bit ioctl() argument.
It also allowed excluding a once set boot CPU ID.
Verify this no longer works and gets rejected with an error.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-5-minipli@grsecurity.net
[sean: tweak assert message+comment for 63:32!=0 testcase]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When detecting AMD PMU support for encoding "branch instructions retired"
as event 0xc2,0, simply check for Family 17h+ as all Zen CPUs support said
encoding, and AMD will maintain the encoding for backwards compatibility
on future CPUs.
Note, the kernel proper also interprets Family 17h+ as Zen (see the sole
caller of init_amd_zen_common()).
Suggested-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20240605050835.30491-1-manali.shukla@amd.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Due to commit 2b7deea3ec ("Revert "kvm: selftests: move base
kvm_util.h declarations to kvm_util_base.h"") kvm selftests now
requires explicitly including ucall_common.h when needed. The commit
added the directives everywhere they were needed at the time, but, by
merge time, new places had been merged for RISC-V. Add those now to
fix RISC-V's compilation.
Fixes: dee7ea42a1 ("Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240603122045.323064-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Let's test that we can have shared zeropages in our process as long as
storage keys are not getting used, that shared zeropages are properly
unshared (replaced by anonymous pages) once storage keys are enabled,
and that no new shared zeropages are populated after storage keys
were enabled.
We require the new pagemap interface to detect the shared zeropage.
On an old kernel (zeropages always disabled):
# ./s390x/shared_zeropage_test
TAP version 13
1..3
not ok 1 Shared zeropages should be enabled
ok 2 Shared zeropage should be gone
ok 3 Shared zeropages should be disabled
# Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
On a fixed kernel:
# ./s390x/shared_zeropage_test
TAP version 13
1..3
ok 1 Shared zeropages should be enabled
ok 2 Shared zeropage should be gone
ok 3 Shared zeropages should be disabled
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Testing of UFFDIO_ZEROPAGE can be added later.
[ agordeev: Fixed checkpatch complaint, added ucall_common.h include ]
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20240412084329.30315-1-david@redhat.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use the max mappable GPA via GuestPhysBits advertised by KVM to calculate
max_gfn. Currently some selftests (e.g. access_tracking_perf_test,
dirty_log_test...) add RAM regions close to max_gfn, so guest may access
GPA beyond its mappable range and cause infinite loop.
Adjust max_gfn in vm_compute_max_gfn() since x86 selftests already
overrides vm_compute_max_gfn() specifically to deal with goofy edge cases.
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240513014003.104593-1-tao1.su@linux.intel.com
[sean: tweak name, add comment and sanity check]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currrentl a 32 bit 1u value is being shifted more than 32 bits causing
overflow and incorrect checking of bits 32-63. Fix this by using the
BIT_ULL macro for shifting bits.
Detected by cppcheck:
sev_init2_tests.c:108:34: error: Shifting 32-bit value by 63 bits is
undefined behaviour [shiftTooManyBits]
Fixes: dfc083a181 ("selftests: kvm: add tests for KVM_SEV_INIT2")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240523154102.2236133-1-colin.i.king@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
'memslot_antagonist_args' is unused since the original
commit f73a344625 ("KVM: selftests: Add memslot modification stress
test").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240602235529.228204-1-linux@treblig.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
This file was supposed to be removed in commit 2b7deea3ec ("Revert
"kvm: selftests: move base kvm_util.h declarations to kvm_util_base.h""),
but it survived. Remove it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
-----BEGIN PGP SIGNATURE-----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=vsRz
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM selftests treewide updates for 6.10:
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmY+sFIACgkQOlYIJqCj
N/3HlQ/+KZM32T/nbNvjiiinpU3YNl/I6zx/U9eXzAtcbdx9bmTVg1UKl6VOFzU9
C2nxLr3SSj4vXA0iOMe/FgZ0VB17BnLCp8fPc2z7HpcRzpO0XTVjRRlQdJhT8Kep
CMihuk9KOAb0RgTnq3TytsgRun/h6SaSmNBk6/Ml8BE7eSoXm2bAkUnU7+32ZyZD
XriuH6Y7I4l4TkMByb3KrlIaFYLkoDp7mAsYeYn0kk9YdBUuzYIXshJOM9Nd4289
9YIppoPMXOmPyW54NnbiWD/Snq0O4/tKTtQFzogotXBMrkLOBDaLWVSCjOXcxlug
66cJmizIkEEWjPntoITQNPUlniQUXUuxCvZqtlhA+kYYVpUs52NIZfOccvzZTYfz
jxP7koPiPgVI7PcslLkjcEHNKOw/2S8dUMbzRg/p6fQiiF5CyOINNr9I+UR2jW+S
ivghhdk6sEi6YwB7NVSL3vVjHctdydwGtBzA05ebsIoHb4hfBsBSHOt5hoFC5lE0
pw220v+FGVXciubzHd1378kOchRMiRxYvgANcTjRD9ZIHGZzfkS8IbhVqZMrPkGq
aDrGM8Ujz9ePqblsizmh1nYTH93v/xoOQP2zVqd3ItdpCVAoZChQrh7uoWfulSf1
q2zaqCz7oA7o4G8yX30rKRoRxgb/HsKqLvPItHpIUcVo83O7CVQ=
=wAt8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM selftests cleanups and fixes for 6.10:
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=CEfD
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.10
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
* kvm-arm64/mpidr-reset:
: .
: Fixes for CLIDR_EL1 and MPIDR_EL1 being accidentally mutable across
: a vcpu reset, courtesy of Oliver. From the cover letter:
:
: "For VM-wide feature ID registers we ensure they get initialized once for
: the lifetime of a VM. On the other hand, vCPU-local feature ID registers
: get re-initialized on every vCPU reset, potentially clobbering the
: values userspace set up.
:
: MPIDR_EL1 and CLIDR_EL1 are the only registers in this space that we
: allow userspace to modify for now. Clobbering the value of MPIDR_EL1 has
: some disastrous side effects as the compressed index used by the
: MPIDR-to-vCPU lookup table assumes MPIDR_EL1 is immutable after KVM_RUN.
:
: Series + reproducer test case to address the problem of KVM wiping out
: userspace changes to these registers. Note that there are still some
: differences between VM and vCPU scoped feature ID registers from the
: perspective of userspace. We do not allow the value of VM-scope
: registers to change after KVM_RUN, but vCPU registers remain mutable."
: .
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
Signed-off-by: Marc Zyngier <maz@kernel.org>
Test that CLIDR_EL1 and MPIDR_EL1 are modifiable from userspace and that
the values are preserved across a vCPU reset like the other feature ID
registers.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502233529.1958459-8-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Rather than comparing against what is returned by the ioctl, store
expected values for the feature ID registers in a table and compare with
that instead.
This will prove useful for subsequent tests involving vCPU reset.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502233529.1958459-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Explicitly require KVM_CAP_USER_MEMORY2 for selftests that create memslots,
i.e. skip selftests that need memslots instead of letting them fail on
KVM_SET_USER_MEMORY_REGION2. While it's ok to take a dependency on new
kernel features, selftests should skip gracefully instead of failing hard
when run on older kernels.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/69ae0694-8ca3-402c-b864-99b500b24f5d@moroto.mountain
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240430162133.337541-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The rseq test's migration worker delays 1-10 us, assuming that one KVM_RUN
iteration only takes a few microseconds. But if the CPU low power wakeup
latency is large enough, for example, hundreds or even thousands of
microseconds for deep C-state exit latencies on x86 server CPUs, it may
happen that the target CPU is unable to wakeup and run the vCPU before the
migration worker starts to migrate the vCPU thread to the _next_ CPU.
If the system workload is light, most CPUs could be at a certain low
power state, which may result in less successful migrations and fail the
migration/KVM_RUN ratio sanity check. But this is not supposed to be
deemed a test failure.
Add a command line option to skip the sanity check, along with a comment
and a verbose assert message to try to help the user resolve the potential
source of failures without having to resort to disabling the check.
Co-developed-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Signed-off-by: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Link: https://lore.kernel.org/r/20240502213936.27619-1-zide.chen@intel.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Fix + test for a NULL dereference resulting from unsanitised user
input in the vgic-v2 device attribute accessors
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZilbBhccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFoIDAQDd28yg55iX18Ad/3zfAMdWgdNz
NPeicTshy6xeADWTuAEAvRF7KBaC5YQQI8NeWSVd0AYJ63DkF9pzXR9dgY0iQgE=
=VHCP
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.9, part #2
- Fix + test for a NULL dereference resulting from unsanitised user
input in the vgic-v2 device attribute accessors
Drop the @selector from the kernel code, data, and TSS builders and
instead hardcode the respective selector in the helper. Accepting a
selector but not a base makes the selector useless, e.g. the data helper
can't create per-vCPU for FS or GS, and so loading GS with KERNEL_DS is
the only logical choice.
And for code and TSS, there is no known reason to ever want multiple
segments, e.g. there are zero plans to support 32-bit kernel code (and
again, that would require more than just the selector).
If KVM selftests ever do add support for per-vCPU segments, it'd arguably
be more readable to add a dedicated helper for building/setting the
per-vCPU segment, and move the common data segment code to an inner
helper.
Lastly, hardcoding the selector reduces the probability of setting the
wrong selector in the vCPU versus what was created by the VM in the GDT.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Initialize x86's various segments in the GDT during creation of relevant
VMs instead of waiting until vCPUs come along. Re-installing the segments
for every vCPU is both wasteful and confusing, as is installing KERNEL_DS
multiple times; NOT installing KERNEL_DS for GS is icing on the cake.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a proper #define for the TSS selector instead of open coding 0x18 and
hoping future developers don't use that selector for something else.
Opportunistically rename the code and data selector macros to shorten the
names, align the naming with the kernel's scheme, and capture that they
are *kernel* segments.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Allocate x86's per-VM TSS at creation of a non-barebones VM. Like the
GDT, the TSS is needed to actually run vCPUs, i.e. every non-barebones VM
is all but guaranteed to allocate the TSS sooner or later.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that the per-VM, on-demand allocation logic in kvm_setup_gdt() and
vcpu_init_descriptor_tables() is gone, fold them into vcpu_init_sregs().
Note, both kvm_setup_gdt() and vcpu_init_descriptor_tables() configured the
GDT, which is why it looks like kvm_setup_gdt() disappears.
Opportunistically delete the pointless zeroing of the IDT limit (it was
being unconditionally overwritten by vcpu_init_descriptor_tables()).
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace the switch statement on vm->mode in x86's vcpu_init_sregs()'s with
a simple assert that the VM has a 48-bit virtual address space. A switch
statement is both overkill and misleading, as the existing code incorrectly
implies that VMs with LA57 would need different to configuration for the
LDT, TSS, and flat segments. In all likelihood, the only difference that
would be needed for selftests is CR4.LA57 itself.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Allocate the GDT during creation of non-barebones VMs instead of waiting
until the first vCPU is created, as the whole point of non-barebones VMs
is to be able to run vCPUs, i.e. the GDT is going to get allocated no
matter what.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Map x86's exception handlers at VM creation, not vCPU setup, as the
mapping is per-VM, i.e. doesn't need to be (re)done for every vCPU.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Initialize the IDT and exception handlers for all non-barebones VMs and
vCPUs on x86. Forcing tests to manually configure the IDT just to save
8KiB of memory is a terrible tradeoff, and also leads to weird tests
(multiple tests have deliberately relied on shutdown to indicate success),
and hard-to-debug failures, e.g. instead of a precise unexpected exception
failure, tests see only shutdown.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename vcpu_setup() to be more descriptive and precise, there is a whole
lot of "setup" that is done for a vCPU that isn't in said helper.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move x86's various descriptor table helpers in processor.c up above
kvm_arch_vm_post_create() and vcpu_setup() so that the helpers can be
made static and invoked from the aforementioned functions.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly clobber the guest IDT in the "delete memslot" test, which
expects the deleted memslot to result in either a KVM emulation error, or
a triple fault shutdown. A future change to the core selftests library
will configuring the guest IDT and exception handlers by default, i.e.
will install a guest #PF handler and put the guest into an infinite #NPF
loop (the guest hits a !PRESENT SPTE when trying to vector a #PF, and KVM
reinjects the #PF without fixing the #NPF, because there is no memslot).
Note, it's not clear whether or not KVM's behavior is reasonable in this
case, e.g. arguably KVM should try (and fail) to emulate in response to
the #NPF. But barring a goofy/broken userspace, this scenario will likely
never happen in practice. Punt the KVM investigation to the future.
Link: https://lore.kernel.org/r/20240314232637.2538648-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework platform_info_test to actually handle and verify the expected #GP
on RDMSR when the associated KVM capability is disabled. Currently, the
test _deliberately_ doesn't handle the #GP, and instead lets it escalated
to a triple fault shutdown.
In addition to verifying that KVM generates the correct fault, handling
the #GP will be necessary (without even more shenanigans) when a future
change to the core KVM selftests library configures the IDT and exception
handlers by default (the test subtly relies on the IDT limit being '0').
Link: https://lore.kernel.org/r/20240314232637.2538648-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
As a first step toward gracefully handling the expected #GP on RDMSR in
platform_info_test, move the test's assert on the non-faulting RDMSR
result into the guest itself. This will allow using a unified flow for
the host userspace side of things.
Link: https://lore.kernel.org/r/20240314232637.2538648-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix an off-by-one bug in the initialization of the GDT limit, which as
defined in the SDM is inclusive, not exclusive.
Note, vcpu_init_descriptor_tables() gets the limit correct, it's only
vcpu_setup() that is broken, i.e. only tests that _don't_ invoke
vcpu_init_descriptor_tables() can have problems. And the fact that KVM
effectively initializes the GDT twice will be cleaned up in the near
future.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: rewrite changelog]
Link: https://lore.kernel.org/r/20240314232637.2538648-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_vm_arch exists, move the GDT, IDT, and TSS fields to x86's
implementation, as the structures are firmly x86-only.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the base types unique to KVM selftests out of kvm_util.h and into a
new header, kvm_util_types.h. This will allow kvm_util_arch.h, i.e. core
arch headers, to reference common types, e.g. vm_vaddr_t and vm_paddr_t.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Effectively revert the movement of code from kvm_util.h => kvm_util_base.h,
as the TL;DR of the justification for the move was to avoid #idefs and/or
circular dependencies between what ended up being ucall_common.h and what
was (and now again, is), kvm_util.h.
But avoiding #ifdef and circular includes is trivial: don't do that. The
cost of removing kvm_util_base.h is a few extra includes of ucall_common.h,
but that cost is practically nothing. On the other hand, having a "base"
version of a header that is really just the header itself is confusing,
and makes it weird/hard to choose names for headers that actually are
"base" headers, e.g. to hold core KVM selftests typedefs.
For all intents and purposes, this reverts commit
7d9a662ed9.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Override vcpu_arch_put_guest() to randomly force emulation on supported
accesses. Force emulation of LOCK CMPXCHG as well as a regular MOV to
stress KVM's emulation of atomic accesses, which has a unique path in
KVM's emulator.
Arbitrarily give all the decisions 50/50 odds; absent much, much more
sophisticated infrastructure for generating random numbers, it's highly
unlikely that doing more than a coin flip with affect selftests' ability
to find KVM bugs.
This is effectively a regression test for commit 910c57dfa4 ("KVM: x86:
Mark target gfn of emulated atomic instruction as dirty").
Link: https://lore.kernel.org/r/20240314185459.2439072-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce a macro, vcpu_arch_put_guest(), for "putting" values to memory
from guest code in "interesting" situations, e.g. when writing memory that
is being dirty logged. Structure the macro so that arch code can provide
a custom implementation, e.g. x86 will use the macro to force emulation of
the access.
Use the helper in dirty_log_test, which is of particular interest (see
above), and in xen_shinfo_test, which isn't all that interesting, but
provides a second usage of the macro with a different size operand
(uint8_t versus uint64_t), i.e. to help verify that the macro works for
more than just 64-bit values.
Use "put" as the verb to align with the kernel's {get,put}_user()
terminology.
Link: https://lore.kernel.org/r/20240314185459.2439072-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global snapshot of kvm_is_forced_emulation_enabled() and sync it to
all VMs by default so that core library code can force emulation, e.g. to
allow for easier testing of the intersections between emulation and other
features in KVM.
Link: https://lore.kernel.org/r/20240314185459.2439072-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move memstress' random bool logic into common code to avoid reinventing
the wheel for basic yes/no decisions. Provide an outer wrapper to handle
the basic/common case of just wanting a 50/50 chance of something
happening.
Link: https://lore.kernel.org/r/20240314185459.2439072-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global guest_random_state instance, i.e. a pseudo-RNG, so that an
RNG is available for *all* tests. This will allow randomizing behavior
in core library code, e.g. x86 will utilize the pRNG to conditionally
force emulation of writes from within common guest code.
To allow for deterministic runs, and to be compatible with existing tests,
allow tests to override the seed used to initialize the pRNG.
Note, the seed *must* be overwritten before a VM is created in order for
the seed to take effect, though it's perfectly fine for a test to
initialize multiple VMs with different seeds.
And as evidenced by memstress_guest_code(), it's also a-ok to instantiate
more RNGs using the global seed (or a modified version of it). The goal
of the global RNG is purely to ensure that _a_ source of random numbers is
available, it doesn't have to be the _only_ RNG.
Link: https://lore.kernel.org/r/20240314185459.2439072-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():
In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^
When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423190308.2883084-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Writing various root-only files, omit "sudo" when already running as root
to allow running the NX hugepage test on systems with a minimal rootfs,
i.e. without sudo.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240415-kvm-selftests-no-sudo-v1-1-95153ad5f470@google.com
[sean: name the helper do_sudo() instead of maybe_sudo(), massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
SBI PMU test comprises of multiple tests and user may want to run
only a subset depending on the platform. The most common case would
be to run all to validate all the tests. However, some platform may
not support all events or all ISA extensions.
The commandline option allows user to disable any set of tests if
they want to.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-25-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a test for verifying overflow interrupt. Currently, it relies on
overflow support on cycle/instret events. This test works for cycle/
instret events which support sampling via hpmcounters on the platform.
There are no ISA extensions to detect if a platform supports that. Thus,
this test will fail on platform with virtualization but doesn't
support overflow on these two events.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-24-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Verify PMU snapshot functionality by setting up the shared memory
correctly and reading the counter values from the shared memory
instead of the CSR.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-23-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
This test implements basic sanity test and cycle/instret event
counting tests.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-22-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows Sscofpmf extension for Guest/VM so let us
add this extension to get-reg-list test.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-20-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
__vcpu_has_ext can check both SBI and ISA extensions when the first
argument is properly converted to SBI/ISA extension IDs. Introduce
two helper functions to make life easier for developers so they
don't have to worry about the conversions.
Replace the current usages as well with new helpers.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-19-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SBI definitions will continue to grow. Move the sbi related
definitions to its own header file from processor.h
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-18-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
If this feature is not supported or is disabled by IA32_MISC_ENABLE on
the host, executing MONITOR or MWAIT instruction from the guest doesn't
cause monitor/mwait VM exits, but a #UD.
So, we need to skip this test if CPUID.01H:ECX[3] is cleared.
Signed-off-by: Zide Chen <zide.chen@intel.com>
Link: https://lore.kernel.org/r/20240411210237.34646-1-zide.chen@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
xen_shinfo_test is observed to be flaky failing sporadically with
"VM time too old". With min_ts/max_ts debug print added:
Wall clock (v 3269818) 1704906491.986255664
Time info 1: v 1282712 tsc 33530585736 time 14014430025 mul 3587552223 shift 4294967295 flags 1
Time info 2: v 1282712 tsc 33530585736 time 14014430025 mul 3587552223 shift 4294967295 flags 1
min_ts: 1704906491.986312153
max_ts: 1704906506.001006963
==== Test Assertion Failure ====
x86_64/xen_shinfo_test.c:1003: cmp_timespec(&min_ts, &vm_ts) <= 0
pid=32724 tid=32724 errno=4 - Interrupted system call
1 0x00000000004030ad: main at xen_shinfo_test.c:1003
2 0x00007fca6b23feaf: ?? ??:0
3 0x00007fca6b23ff5f: ?? ??:0
4 0x0000000000405e04: _start at ??:?
VM time too old
The test compares wall clock data from shinfo (which is the output of
kvm_get_wall_clock_epoch()) against clock_gettime(CLOCK_REALTIME) in the
host system before the VM is created. In the example above, it compares
shinfo: 1704906491.986255664 vs min_ts: 1704906491.986312153
and fails as the later is greater than the former. While this sounds like
a sane test, it doesn't pass reality check: kvm_get_wall_clock_epoch()
calculates guest's epoch (realtime when the guest was created) by
subtracting kvmclock from the current realtime and the calculation happens
when shinfo is setup. The problem is that kvmclock is a raw clock and
realtime clock is affected by NTP. This means that if realtime ticks with a
slightly reduced frequency, "guest's epoch" calculated by
kvm_get_wall_clock_epoch() will actually tick backwards! This is not a big
issue from guest's perspective as the guest can't really observe this but
this epoch can't be compared with a fixed clock_gettime() on the host.
Replace the check with comparing wall clock data from shinfo to
KVM_GET_CLOCK. The later gives both realtime and kvmclock so guest's epoch
can be calculated by subtraction. Note, CLOCK_REALTIME is susceptible to
leap seconds jumps but there's no better alternative in KVM at this
moment. Leave a comment and accept 1s delta.
Reported-by: Jan Richter <jarichte@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240206151950.31174-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that all the infrastructure is in place, add a test to stress KVM's
LPI injection. Keep a 1:1 mapping of device IDs to signalling threads,
allowing the user to scale up/down the sender side of an LPI. Make use
of the new VM stats for the translation cache to estimate the
translation hit rate.
Since the primary focus of the test is on performance, you'll notice
that the guest code is not pedantic about the LPIs it receives. Counting
the number of LPIs would require synchronization between the device and
vCPU threads to avoid coalescing and would get in the way of performance
numbers.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-20-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The selftests GIC library presently does not support LPIs. Add a
userspace helper for configuring a redistributor for LPIs, installing
an LPI configuration table and LPI pending table.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-18-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
A prerequisite of testing LPI injection performance is of course
instantiating an ITS for the guest. Add a small library for creating an
ITS and interacting with it from the guest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-17-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The base registers in the GIC ITS and redistributor for LPIs are 64 bits
wide. Add quadword accessors to poke at them.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-16-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
It would appear that all of the selftests are using the same exact
layout for the GIC frames. Fold this back into the library
implementation to avoid defining magic values all over the selftests.
This is an extension of Colton's change, ripping out parameterization of
from the library internals in addition to the public interfaces.
Co-developed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-15-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
There are a few subtle incongruencies between the GIC definitions used
by the kernel and selftests. Furthermore, the selftests header blends
implementation detail (e.g. default priority) with the architectural
definitions.
This is all rather annoying, since bulk imports of the kernel header
is not possible. Move selftests-specific definitions out of the
offending header and realign tests on the canonical definitions for
things like sysregs. Finally, haul in a fresh copy of the gicv3 header
to enable a forthcoming ITS selftest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-14-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Assert that accesses to a non-existent vgic-v2 CPU interface
consistently fail across the various KVM device attr ioctls. This also
serves as a regression test for a bug wherein KVM hits a NULL
dereference when the CPUID specified in the ioctl is invalid.
Note that there is no need to print the observed errno, as TEST_ASSERT()
will take care of it.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240424173959.3776798-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Extend vmx_dirty_log_test to include accesses made by L2 when EPT is
disabled.
This commit adds explicit coverage of a bug caught by syzkaller, where
the TDP MMU would clear D-bits instead of write-protecting SPTEs being
used to map an L2, which only happens when L1 does not enable EPT,
causing writes made by L2 to not be reflected in the dirty log when PML
is enabled:
$ ./vmx_dirty_log_test
Nested EPT: disabled
==== Test Assertion Failure ====
x86_64/vmx_dirty_log_test.c:151: test_bit(0, bmap)
pid=72052 tid=72052 errno=4 - Interrupted system call
(stack trace empty)
Page 0 incorrectly reported clean
Opportunistically replace the volatile casts with {READ,WRITE}_ONCE().
Link: https://lore.kernel.org/kvm/000000000000c6526f06137f18cc@google.com/
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-5-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
