mirror of
git://git.yoctoproject.org/linux-yocto.git
synced 2025-08-21 16:31:14 +02:00
master
89 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
fbc90c042c |
- 875fa64577da ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
||
|
John Hubbard
|
a84a0c6a6d |
selftests/lib.mk: silence some clang warnings that gcc already ignores
gcc defaults to silence (off) for the following warnings, but clang
defaults to the opposite. The warnings are not useful for the kernel
itself, which is why they have remained disabled in gcc for the main
kernel build. And it is only due to including kernel data structures in
the selftests, that we get the warnings from clang.
-Waddress-of-packed-member
-Wgnu-variable-sized-type-not-at-end
In other words, the warnings are not unique to the selftests: there is
nothing that the selftests' code does that triggers these warnings,
other than the act of including the kernel's data structures. Therefore,
silence them for the clang builds as well.
This eliminates warnings for the net/ and user_events/ kselftest
subsystems, in these files:
./net/af_unix/scm_rights.c
./net/timestamping.c
./net/ipsec.c
./user_events/perf_test.c
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Edward Liaw
|
cc937dad85 |
selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk
Centralize the _GNU_SOURCE definition to CFLAGS in lib.mk. Remove redundant defines from Makefiles that import lib.mk. Convert any usage of "#define _GNU_SOURCE 1" to "#define _GNU_SOURCE". This uses the form "-D_GNU_SOURCE=", which is equivalent to "#define _GNU_SOURCE". Otherwise using "-D_GNU_SOURCE" is equivalent to "-D_GNU_SOURCE=1" and "#define _GNU_SOURCE 1", which is less commonly seen in source code and would require many changes in selftests to avoid redefinition warnings. Link: https://lkml.kernel.org/r/20240625223454.1586259-2-edliaw@google.com Signed-off-by: Edward Liaw <edliaw@google.com> Suggested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: André Almeida <andrealmeid@igalia.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kees Cook <kees@kernel.org> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
70ec81c2e2 |
linux_kselftest-next-6.10-rc1-fixes
This kselftest fixes update for Linux 6.10-rc1 consists of reverts framework change to add D_GNU_SOURCE to KHDR_INCLUDES to Makefile, lib.mk, and kselftest_harness.h and follow-on changes to cgroup and sgx test as they are causing build failures and warnings. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmZLb3sACgkQCwJExA0N QxweSQ//WiDfJtObms7pDos6Q5DBnq2seGgK3+JUcAbBhNETPLzYBHSnvVnixRmi +QccdtTlPYE98vAk7GCt9zuBr82SV1z9VaNHVst+4jZeaSkmNFHGMS/ZSEE1x79g z4qL1C1eA0qPzmW17vgUv08+Lm5WKxt4RIsZEYWBi7tnu+MbfcaPaTbGZ85o/tG0 IVZluGfVVaci7CQnpYhRD4hsJOWUC2H/YrvCNpjm6rGUFu+4Jm7rvHJPO+Ef6yCT tjKc5wReHRR2xT2+i4FoFjGqrAMsM/xakdiVpQWUlHUSm5/Nboqw7B73eNm/N2YL KvoJKBCuUPjmPKsoDGyUSORyx7j5RJnmdbGbFISOnZGpDVDkwSJVQDPJKeW9WqfS ONYVRRyjdift7BVcbFIpnde6TD7lCCv8sYrr2SpZv1wHybhMmrL0ojoTOOO93Xcd agpHGHjIOqmn+EGmptYeFEKKHr/GX+r6cQK0csmNhuSajHxeohwpzzs/v9gUisQ0 BB5dC2Mo7wj1CES8DYKucFSSyCmZruzpyKtEz7Ndj1SAYzZqqYQV41kMDdlGYDE4 qsHNVpA5DOFLOV8wOX59XjSu+UnJDjFyluWSaj66lJ1gA9qpYEifWD0l851LZ1YG hcCTd90Hbuh9XlOPmQEciVF98tJFrO0ho6vQu41jgjLPvJ4Y8H8= =Qisj -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Revert framework change to add D_GNU_SOURCE to KHDR_INCLUDES to Makefile, lib.mk, and kselftest_harness.h and follow-on changes to cgroup and sgx test as they are causing build failures and warnings" * tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Revert "selftests/cgroup: Drop define _GNU_SOURCE" Revert "selftests/sgx: Include KHDR_INCLUDES in Makefile" Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE" |
||
|
Shuah Khan
|
cee27ae5f1 |
Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE"
This reverts commit
|
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
|
Linus Torvalds
|
1b294a1f35 |
Networking changes for 6.10.
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
||
|
Edward Liaw
|
daef47b89e |
selftests: Compile kselftest headers with -D_GNU_SOURCE
Add the -D_GNU_SOURCE flag to KHDR_INCLUDES so that it is defined in a central location. Commit |
||
|
Valentin Obst
|
d4e6fbd245 |
selftests: default to host arch for LLVM builds
Align the behavior for gcc and clang builds by interpreting unset
`ARCH` and `CROSS_COMPILE` variables in `LLVM` builds as a sign that the
user wants to build for the host architecture.
This patch preserves the properties that setting the `ARCH` variable to an
unknown value will trigger an error that complains about insufficient
information, and that a set `CROSS_COMPILE` variable will override the
target triple that is determined based on presence/absence of `ARCH`.
When compiling with clang, i.e., `LLVM` is set, an unset `ARCH` variable in
combination with an unset `CROSS_COMPILE` variable, i.e., compiling for
the host architecture, leads to compilation failures since `lib.mk` can
not determine the clang target triple. In this case, the following error
message is displayed for each subsystem that does not set `ARCH` in its
own Makefile before including `lib.mk` (lines wrapped at 75 chrs):
make[1]: Entering directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
../lib.mk:33: *** Specify CROSS_COMPILE or add '--target=' option to
lib.mk. Stop.
make[1]: Leaving directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
In the same scenario a gcc build would default to the host architecture,
i.e., it would use plain `gcc`.
Fixes:
|
||
|
John Hubbard
|
e076eaca59 |
selftests: break the dependency upon local header files
Patch series "Fix selftests/mm build without requiring "make headers"". As mentioned in each patch, this implements the solution that we discussed in December 2023, in [1]. This turned out to be very clean and easy. It should also be quite easy to maintain. This should also make Peter Zijlstra happy, because it directly addresses the root cause of his "NAK NAK NAK" reply [2]. :) [1] https://lore.kernel.org/all/783a4178-1dec-4e30-989a-5174b8176b09@redhat.com/ [2] https://lore.kernel.org/lkml/20231103121652.GA6217@noisy.programming.kicks-ass.net/ This patch (of 2): Use tools/include/uapi/ files instead. These are obtained by taking a snapshot: run "make headers" at the top level, then copy the desired header file into the appropriate subdir in tools/uapi/. This was discussed and solved in [1]. However, even before copying any additional files there, there are already quite a few in tools/include/uapi already. And these will immediately fix a number of selftests/mm build failures. So this patch: a) Adds TOOLS_INCLUDES to selftests/lib.mk, so that all selftests can immediately and easily include the snapshotted header files. b) Uses $(TOOLS_INCLUDES) in the selftests/mm build. On today's Arch Linux, this already fixes all build errors except for a few userfaultfd.h (those will be addressed in a subsequent patch). [1] https://lore.kernel.org/all/783a4178-1dec-4e30-989a-5174b8176b09@redhat.com/ Link: https://lkml.kernel.org/r/20240328033418.203790-1-jhubbard@nvidia.com Link: https://lkml.kernel.org/r/20240328033418.203790-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jakub Kicinski
|
6fc6d7f593 |
selftests: adopt BPF's approach to quieter builds
selftest build is fairly noisy, it's easy to miss warnings. It's standard practice to add alternative messages in the Makefile. I was grepping for existing solutions, and found that bpf already has the right knobs. Move them to lib.mk and adopt in net. Convert the basic rules in lib.mk. Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240411190534.444918-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
9187210eee |
Networking changes for 6.9.
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
||
|
Marcos Paulo de Souza
|
539cd3f4da |
selftests: lib.mk: Do not process TEST_GEN_MODS_DIR
The directory itself doesn't need have path handling, since it's only to mean where is the directory that contains modules to be built. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Benjamin Poirier
|
2a0683be5b |
selftests: Introduce Makefile variable to list shared bash scripts
Some tests written in bash source other files in a parent directory. For example, drivers/net/bonding/dev_addr_lists.sh sources net/forwarding/lib.sh. If a subset of tests is exported and run outside the source tree (for example by using `make -C tools/testing/selftests gen_tar TARGETS="drivers/net/bonding"`), these other files must be made available as well. Commit |
||
|
Marcos Paulo de Souza
|
6727980b67 |
kselftests: lib.mk: Add TEST_GEN_MODS_DIR variable
Add TEST_GEN_MODS_DIR variable for kselftests. It can point to a directory containing kernel modules that will be used by selftest scripts. The modules are built as external modules for the running kernel. As a result they are always binary compatible and the same tests can be used for older or newer kernels. The build requires "kernel-devel" package to be installed. For example, in the upstream sources, the rpm devel package is produced by "make rpm-pkg" The modules can be built independently by make -C tools/testing/selftests/livepatch/ or they will be automatically built before running the tests via make -C tools/testing/selftests/livepatch/ run_tests Note that they are _not_ built when running the standalone tests by calling, for example, ./test-state.sh. Along with TEST_GEN_MODS_DIR, it was necessary to create a new install rule. INSTALL_MODS_RULE is needed because INSTALL_SINGLE_RULE would copy the entire TEST_GEN_MODS_DIR directory to the destination, even the files created by Kbuild to compile the modules. The new install rule copies only the .ko files, as we would expect the gen_tar to work. Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
John Hubbard
|
43e8832fed |
Revert "selftests: error out if kernel header files are not yet built"
This reverts commit |
||
|
Björn Töpel
|
3f3f384139 |
selftests: Keep symlinks, when possible
When kselftest is built/installed with the 'gen_tar' target, rsync is used for the installation step to copy files. Extra care is needed for tests that have symlinks. Commit |
||
|
John Hubbard
|
9fc96c7c19 |
selftests: error out if kernel header files are not yet built
As per a discussion with Muhammad Usama Anjum [1], the following is how
one is supposed to build selftests:
make headers && make -C tools/testing/selftests/mm
Change the selftest build system's lib.mk to fail out with a helpful
message if that prerequisite "make headers" has not been done yet.
[1] https://lore.kernel.org/all/bf910fa5-0c96-3707-cce4-5bcc656b6274@collabora.com/
[jhubbard@nvidia.com: abort the make process the first time headers aren't detected]
Link: https://lkml.kernel.org/r/14573e7e-f2ad-ff34-dfbd-3efdebee51ed@nvidia.com
[anders.roxell@linaro.org: fix out-of-tree builds]
Link: https://lkml.kernel.org/r/20230613074931.666966-1-anders.roxell@linaro.org
Link: https://lkml.kernel.org/r/20230606071637.267103-12-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Guillaume Tucker
|
624c60f326 |
selftests: fix LLVM build for i386 and x86_64
Add missing cases for the i386 and x86_64 architectures when
determining the LLVM target for building kselftest.
Fixes:
|
||
|
Mark Brown
|
9fdaca2c1e |
kselftest: Fix error message for unconfigured LLVM builds
We are missing a ) when we attempt to complain about not having enough configuration for clang, resulting in the rather inscrutable error: ../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop. Add the required ) so we print the message we were trying to print. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
23a68d14de |
linux-kselftest-next-6.2-rc1
This Kselftest update for Linux 6.2-rc1 consists of several fixes
and enhancements to existing tests and a few new tests:
- adds new amd-pstate and fixes and enhances existing ones
- adds new watchdog tests and enhances existing ones to improve coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes
-----BEGIN PGP SIGNATURE-----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=4cDX
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes and enhancements to existing tests and a few new tests:
- add new amd-pstate tests and fix and enhance existing ones
- add new watchdog tests and enhance existing ones to improve
coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes"
* tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (24 commits)
selftests/ftrace: Use long for synthetic event probe test
selftests/tpm2: Split async tests call to separate shell script runner
selftests: splice_read: Fix sysfs read cases
selftests: ftrace: Use "grep -E" instead of "egrep"
selftests: gpio: Use "grep -E" instead of "egrep"
selftests: kselftest_deps: Use "grep -E" instead of "egrep"
selftests/efivarfs: Add checking of the test return value
cpufreq: amd-pstate: fix spdxcheck warnings for amd-pstate-ut.c
selftests: rtc: skip when RTC is not present
selftests/ftrace: event_triggers: wait longer for test_event_enable
selftests/vDSO: Add riscv getcpu & gettimeofday test
Documentation: amd-pstate: Add tbench and gitsource test introduction
selftests: amd-pstate: Trigger gitsource benchmark and test cpus
selftests: amd-pstate: Trigger tbench benchmark and test cpus
selftests: amd-pstate: Split basic.sh into run.sh and basic.sh.
selftests: amd-pstate: Rename amd-pstate-ut.sh to basic.sh.
selftests/ftrace: Convert tracer tests to use 'requires' to specify program dependency
selftests/ftrace: Add check for ping command for trigger tests
selftests/watchdog: Fix spelling mistake "Temeprature" -> "Temperature"
selftests/watchdog: add test for WDIOC_GETTEMP
...
|
||
|
Benjamin Poirier
|
ae108c48b5 |
selftests: net: Fix cross-tree inclusion of scripts
When exporting and running a subset of selftests via kselftest, files from parts of the source tree which were not exported are not available. A few tests are trying to source such files. Address the problem by using symlinks. The problem can be reproduced by running: make -C tools/testing/selftests gen_tar TARGETS="drivers/net/bonding" [... extract archive ...] ./run_kselftest.sh or: make kselftest KBUILD_OUTPUT=/tmp/kselftests TARGETS="drivers/net/bonding" Fixes: |
||
|
Mickaël Salaün
|
de3ee3f634 |
selftests: Use optional USERCFLAGS and USERLDFLAGS
This change enables to extend CFLAGS and LDFLAGS from command line, e.g. to extend compiler checks: make USERCFLAGS=-Werror USERLDFLAGS=-static USERCFLAGS and USERLDFLAGS are documented in Documentation/kbuild/makefiles.rst and Documentation/kbuild/kbuild.rst This should be backported (down to 5.10) to improve previous kernel versions testing as well. Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20220909103901.1503436-1-mic@digikod.net Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Mickaël Salaün
|
a52540522c
|
selftests/landlock: Fix out-of-tree builds
These changes simplify the Makefile and handle these 5 ways to build Landlock tests: - make -C tools/testing/selftests/landlock - make -C tools/testing/selftests TARGETS=landlock gen_tar - make TARGETS=landlock kselftest-gen_tar - make TARGETS=landlock O=build kselftest-gen_tar - make -C /tmp/linux TARGETS=landlock O=/tmp/build kselftest-gen_tar This also makes $(KHDR_INCLUDES) available to other test collections when building in their directory. Fixes: |
||
|
Axel Rasmussen
|
bdbf0617bb |
selftests/vm: fix inability to build any vm tests
When we stopped using KSFT_KHDR_INSTALL, a side effect is we also changed the value of `top_srcdir`. This can be seen by looking at the code removed by commit |
||
|
Guillaume Tucker
|
49de12ba06 |
selftests: drop KSFT_KHDR_INSTALL make target
Drop the KSFT_KHDR_INSTALL make target now that all use-cases have been removed from the other kselftest Makefiles. Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Mark Brown
|
795285ef24 |
selftests: Fix clang cross compilation
Unlike GCC clang uses a single compiler image to support multiple target architectures meaning that we can't simply rely on CROSS_COMPILE to select the output architecture. Instead we must pass --target to the compiler to tell it what to output, kselftest was not doing this so cross compilation of kselftest using clang resulted in kselftest being built for the host architecture. More work is required to fix tests using custom rules but this gets the bulk of things building. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Nathan Chancellor
|
e9c281928c |
kbuild: Make $(LLVM) more flexible
The LLVM make variable allows a developer to quickly switch between the GNU and LLVM tools. However, it does not handle versioned binaries, such as the ones shipped by Debian, as LLVM=1 just defines the tool variables with the unversioned binaries. There was some discussion during the review of the patch that introduces LLVM=1 around versioned binaries, ultimately coming to the conclusion that developers can just add the folder that contains the unversioned binaries to their PATH, as Debian's versioned suffixed binaries are really just symlinks to the unversioned binaries in /usr/lib/llvm-#/bin: $ realpath /usr/bin/clang-14 /usr/lib/llvm-14/bin/clang $ PATH=/usr/lib/llvm-14/bin:$PATH make ... LLVM=1 However, that can be cumbersome to developers who are constantly testing series with different toolchains and versions. It is simple enough to support these versioned binaries directly in the Kbuild system by allowing the developer to specify the version suffix with LLVM=, which is shorter than the above suggestion: $ make ... LLVM=-14 It does not change the meaning of LLVM=1 (which will continue to use unversioned binaries) and it does not add too much additional complexity to the existing $(LLVM) code, while allowing developers to quickly test their series with different versions of the whole LLVM suite of tools. Some developers may build LLVM from source but not add the binaries to their PATH, as they may not want to use that toolchain systemwide. Support those developers by allowing them to supply the directory that the LLVM tools are available in, as it is no more complex to support than the version suffix change above. $ make ... LLVM=/path/to/llvm/ Update and reorder the documentation to reflect these new additions. At the same time, notate that LLVM=0 is not the same as just omitting it altogether, which has confused people in the past. Link: https://lore.kernel.org/r/20200317215515.226917-1-ndesaulniers@google.com/ Link: https://lore.kernel.org/r/20220224151322.072632223@infradead.org/ Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Anders Roxell
|
a738a4ce84 |
selftests: cgroup: build error multiple outpt files
When building selftests/cgroup: with clang the following error are seen: clang -Wall -pthread test_memcontrol.c cgroup_util.c ../clone3/clone3_selftests.h -o .../builds/current/kselftest/cgroup/test_memcontrol clang: error: cannot specify -o when generating multiple output files make[3]: *** [../lib.mk:146: .../builds/current/kselftest/cgroup/test_memcontrol] Error 1 Rework to add the header files to LOCAL_HDRS before including ../lib.mk, since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in file lib.mk. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Li Zhijian
|
8914a7a247 |
selftests: be sure to make khdr before other targets
LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’? Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors. Here we mark target khdr as NOTPARALLEL to make it be always built first. CC: Philip Li <philip.li@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Kees Cook
|
de53fa9baa |
selftests: lib.mk: Also install "config" and "settings"
Installed seccomp tests would time out because the "settings" file was missing. Install both "settings" (needed for proper test execution) and "config" (needed for informational purposes) with the other test targets. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
9d31d23389 |
Networking changes for 5.13.
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
||
|
Yonghong Song
|
26e6dd1072 |
selftests: Set CC to clang in lib.mk if LLVM is set
selftests/bpf/Makefile includes lib.mk. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed lib.mk issue which sets CC to gcc in all cases. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com |
||
|
Ilya Leoshkevich
|
cb4969e6f9 |
selftests: fix prepending $(OUTPUT) to $(TEST_PROGS)
Currently the following command produces an error message:
linux# make kselftest TARGETS=bpf O=/mnt/linux-build
# selftests: bpf: test_libbpf.sh
# ./test_libbpf.sh: line 23: ./test_libbpf_open: No such file or directory
# test_libbpf: failed at file test_l4lb.o
# selftests: test_libbpf [FAILED]
The error message might not affect the return code of make, therefore
one needs to grep make output in order to detect it.
This is not the only instance of the same underlying problem; any test
with more than one element in $(TEST_PROGS) fails the same way. Another
example:
linux# make O=/mnt/linux-build TARGETS=splice kselftest
[...]
# ./short_splice_read.sh: 15: ./splice_read: not found
# FAIL: /sys/module/test_module/sections/.init.text 2
not ok 2 selftests: splice: short_splice_read.sh # exit=1
The current logic prepends $(OUTPUT) only to the first member of
$(TEST_PROGS). After that, run_one() does
cd `dirname $TEST`
For all tests except the first one, `dirname $TEST` is ., which means
they cannot access the files generated in $(OUTPUT).
Fix by using $(addprefix) to prepend $(OUTPUT)/ to each member of
$(TEST_PROGS).
Fixes:
|
||
|
Tommi Rantala
|
f825d3f7ed |
selftests: filter kselftest headers from command in lib.mk
Commit |
||
|
Kees Cook
|
f0f0a5df4e |
selftests: Extract run_kselftest.sh and generate stand-alone test list
Instead of building a script on the fly (which just repeats the same
thing for each test collection), move the script out of the Makefile and
into run_kselftest.sh, which reads kselftest-list.txt.
Adjust the emit_tests target to report each test on a separate line so
that test running tools (e.g. LAVA) can easily remove individual
tests (for example, as seen in [1]).
[1]
|
||
|
Denys Vlasenko
|
75fa677260 |
selftests: use "$(MAKE)" instead of "make" for headers_install
If top make invocation uses -j4 or larger, this patch reduces "make headers_install" subtask run time from 30 to 7 seconds. CC: Shuah Khan <shuah@kernel.org> CC: Shuah Khan <skhan@linuxfoundation.org> CC: linux-kselftest@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Yauheni Kaliuta
|
c9f75047eb |
selftests: fix condition in run_tests
The check if there are any files to install in case of no files compares "X " with "X" so never false. Remove extra spaces. It may make sense to use make's $(if) function here. Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Yauheni Kaliuta
|
99aacebecb |
selftests: do not use .ONESHELL
Using one shell for the whole recipe with long lists can cause
make[1]: execvp: /bin/sh: Argument list too long
with some shells. Triggered by commit
|
||
|
Linus Torvalds
|
397a979467 |
linux-kselftest-5.7-rc1
This kselftest update Linux 5.7-rc1 consists of:
- resctrl_tests for resctrl file system. resctrl isn't included in the
default TARGETS list in kselftest Makefile. It can be run manually.
- Kselftest harness improvements.
- Kselftest framework and individual test fixes to support runs on
Kernel CI rings and other environments that use relocatable build
and install features.
- Minor cleanups and typo fixes.
-----BEGIN PGP SIGNATURE-----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=FsXI
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This kselftest update consists of:
- resctrl_tests for resctrl file system. resctrl isn't included in
the default TARGETS list in kselftest Makefile. It can be run
manually.
- Kselftest harness improvements.
- Kselftest framework and individual test fixes to support runs on
Kernel CI rings and other environments that use relocatable build
and install features.
- Minor cleanups and typo fixes"
* tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
selftests: enforce local header dependency in lib.mk
selftests: Fix memfd to support relocatable build (O=objdir)
selftests: Fix seccomp to support relocatable build (O=objdir)
selftests/harness: Handle timeouts cleanly
selftests/harness: Move test child waiting logic
selftests: android: Fix custom install from skipping test progs
selftests: android: ion: Fix ionmap_test compile error
selftests: Fix kselftest O=objdir build from cluttering top level objdir
selftests/seccomp: Adjust test fixture counts
selftests/ftrace: Fix typo in trigger-multihist.tc
selftests/timens: Remove duplicated include <time.h>
selftests/resctrl: fix spelling mistake "Errror" -> "Error"
selftests/resctrl: Add the test in MAINTAINERS
selftests/resctrl: Disable MBA and MBM tests for AMD
selftests/resctrl: Use cache index3 id for AMD schemata masks
selftests/resctrl: Add vendor detection mechanism
selftests/resctrl: Add Cache Allocation Technology (CAT) selftest
selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest
selftests/resctrl: Add MBA test
selftests/resctrl: Add MBM test
...
|
||
|
Shuah Khan
|
1056d3d2c9 |
selftests: enforce local header dependency in lib.mk
Add local header dependency in lib.mk. This enforces the dependency blindly even when a test doesn't include the file, with the benefit of a simpler common logic without requiring individual tests to have special rule for it. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Jiri Benc
|
c363eb48ad |
selftests: fix too long argument
With some shells, the command construed for install of bpf selftests becomes too large due to long list of files: make[1]: execvp: /bin/sh: Argument list too long make[1]: *** [../lib.mk:73: install] Error 127 Currently, each of the file lists is replicated three times in the command: in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that by one instance by using make conditionals and separate the echo and rsync into two shell commands. (One would be inclined to just remove the '@' at the beginning of the rsync command and let 'make' echo it by itself; unfortunately, it appears that the '@' in the front of mkdir silences output also for the following commands.) Also, separate handling of each of the lists to its own shell command. The semantics of the makefile is unchanged before and after the patch. The ability of individual test directories to override INSTALL_RULE is retained. Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Masahiro Yamada
|
051f278e9d |
kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree
Commit
|
||
|
Shuah Khan
|
27d79a2b2b |
selftests: fix bpf build/test workflow regression when KBUILD_OUTPUT is set
commit |
||
|
Kees Cook
|
5c069b6ded |
selftests: Move test output to diagnostic lines
This changes the selftest output so that each test's output is prefixed with "# " as a TAP "diagnostic line". This creates a bit of a kernel-specific TAP dialect where the diagnostics precede the results. The TAP spec isn't entirely clear about this, though, so I think it's the correct solution so as to keep interactive runs making sense. If the output _followed_ the result line in the spec-suggested YAML form, each test would dump all of its output at once instead of as it went, making debugging harder. This does, however, solve the recursive TAP output problem, as sub-tests will simply be prefixed by "# ". Parsing sub-tests becomes a simple problem of just removing the first two characters of a given top-level test's diagnostic output, and parsing the results. Note that the shell construct needed to both get an exit code from the first command in a pipe and still filter the pipe (to add the "# " prefix) uses a POSIX solution rather than the bash "pipefail" option which is not supported by dash. Since some test environments may have a very minimal set of utilities available, the new prefixing code will fall back to doing line-at-a-time prefixing if perl and/or stdbuf are not available. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Kees Cook
|
bf66078235 |
selftests: Extract logic for multiple test runs
This moves the logic for running multiple tests into a single "run_many" function of runner.sh. Both "run_tests" and "emit_tests" are modified to use it. Summary handling is now controlled by the "per_test_logging" shell flag. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Kees Cook
|
d4e59a536f |
selftests: Use runner.sh for emit targets
This reuses the new runner.sh for the emit targets instead of manually running each test via run_kselftest.sh. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Kees Cook
|
42d46e57ec |
selftests: Extract single-test shell logic from lib.mk
In order to improve the reusability of the kselftest test running logic, this extracts the single-test logic from lib.mk into kselftest/runner.sh which lib.mk can call directly. No changes in output. As part of the change, this moves the "summary" Makefile logic around to set a new "logfile" output. This will be used again in the future "emit_tests" target as well. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Shuah Khan
|
8ce72dc325 |
selftests: fix headers_install circular dependency
"make kselftest" fails with "Circular Makefile.o <- prepare dependency dropped." error, when lib.mk invokes "make headers_install". Make level 0: Main make calls selftests run_tests target ... Make level n: selftests lib.mk invokes main make's headers_install The secondary level make inherits builtin-rules which will use the rule to generate Makefile.o and runs into "Circular Makefile.o <- prepare dependency dropped." error, and kselftest compile fails. Invoke headers_install target with --no-builtin-rules to avoid circular error. In addition, lib.mk installs headers in the default HDR_PATH, even when build relocation is requested with O= or export KBUILD_OUTPUT. Fix the problem by passing in INSTALL_HDR_PATH. The headers are installed under the specified output "dir/usr". Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Shuah Khan
|
211929fd3f |
selftests: Fix test errors related to lib.mk khdr target
Commit |