Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
*think* such fix will not land in the next week.
Including fixes from netfilter.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=tbcX
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
There is a recently notified BT regression with no fix yet. I do not
think a fix will land in the next week.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in
nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"
* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
net: libwx: fix number of Rx and Tx descriptors
net: dsa: felix: ignore pending status of TAS module when it's disabled
net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
selftests: mptcp: include net_helper.sh file
selftests: mptcp: include lib.sh file
selftests: mptcp: join: restrict fullmesh endp on 1st sf
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
dt-bindings: net: tja11xx: fix the broken binding
selftests: net: csum: Fix checksums for packets with non-zero padding
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
virtio_net: disable premapped mode by default
Revert "virtio_net: big mode skip the unmap check"
Revert "virtio_net: rx remove premapped failover code"
...
* for-next/selftests:
kselftest/arm64: Fix build warnings for ptrace
kselftest/arm64: Actually test SME vector length changes via sigreturn
kselftest/arm64: signal: fix/refactor SVE vector length enumeration
ncdevmem is a devmem TCP netcat. It works similarly to netcat, but it
sends and receives data using the devmem TCP APIs. It uses udmabuf as
the dmabuf provider. It is compatible with a regular netcat running on
a peer, or a ncdevmem running on a peer.
In addition to normal netcat support, ncdevmem has a validation mode,
where it sends a specific pattern and validates this pattern on the
receiver side to ensure data integrity.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20240910171458.219195-13-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, the net_helper.sh file from the parent
directory is used by the MPTCP selftests and it needs to be present when
running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: 1af3bc912e ("selftests: mptcp: lib: use wait_local_port_listen helper")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-3-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lib.sh file from the parent directory is used by the MPTCP selftests
and it needs to be present when running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: f265d3119a ("selftests: mptcp: lib: use setup/cleanup_ns helpers")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-2-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new endpoint using the IP of the initial subflow has been recently
added to increase the code coverage. But it breaks the test when using
old kernels not having commit 86e39e0448 ("mptcp: keep track of local
endpoint still available for each msk"), e.g. on v5.15.
Similar to commit d4c81bbb86 ("selftests: mptcp: join: support local
endpoint being tracked or not"), it is possible to add the new endpoint
conditionally, by checking if "mptcp_pm_subflow_check_next" is present
in kallsyms: this is not directly linked to the commit introducing this
symbol but for the parent one which is linked anyway. So we can know in
advance what will be the expected behaviour, and add the new endpoint
only when it makes sense to do so.
Fixes: 4878f9f842 ("selftests: mptcp: join: validate fullmesh endp on 1st sf")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-1-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test case checks the errno message when percpu map value size
exceeds PCPU_MIN_UNIT_SIZE.
root@debian:~# ./test_maps
...
test_map_percpu_stats_hash_of_maps:PASS
test_map_percpu_stats_map_value_size:PASS
test_sk_storage_map:PASS
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910144111.1464912-3-chen.dylane@gmail.com
llvm change [1] made a change such that __sync_fetch_and_{and,or,xor}()
will generate atomic_fetch_*() insns even if the return value is not used.
This is a deliberate choice to make sure barrier semantics are preserved
from source code to asm insn.
But the change in [1] caused arena_atomics selftest failure.
test_arena_atomics:PASS:arena atomics skeleton open 0 nsec
libbpf: prog 'and': BPF program load failed: Permission denied
libbpf: prog 'and': -- BEGIN PROG LOAD LOG --
arg#0 reference type('UNKNOWN ') size cannot be determined: -22
0: R1=ctx() R10=fp0
; if (pid != (bpf_get_current_pid_tgid() >> 32)) @ arena_atomics.c:87
0: (18) r1 = 0xffffc90000064000 ; R1_w=map_value(map=arena_at.bss,ks=4,vs=4)
2: (61) r6 = *(u32 *)(r1 +0) ; R1_w=map_value(map=arena_at.bss,ks=4,vs=4) R6_w=scalar(smin=0,smax=umax=0xffffffff,v
ar_off=(0x0; 0xffffffff))
3: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar()
4: (77) r0 >>= 32 ; R0_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
5: (5d) if r0 != r6 goto pc+11 ; R0_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R6_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0x)
; __sync_fetch_and_and(&and64_value, 0x011ull << 32); @ arena_atomics.c:91
6: (18) r1 = 0x100000000060 ; R1_w=scalar()
8: (bf) r1 = addr_space_cast(r1, 0, 1) ; R1_w=arena
9: (18) r2 = 0x1100000000 ; R2_w=0x1100000000
11: (db) r2 = atomic64_fetch_and((u64 *)(r1 +0), r2)
BPF_ATOMIC stores into R1 arena is not allowed
processed 9 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
libbpf: prog 'and': failed to load: -13
libbpf: failed to load object 'arena_atomics'
libbpf: failed to load BPF skeleton 'arena_atomics': -13
test_arena_atomics:FAIL:arena atomics skeleton load unexpected error: -13 (errno 13)
#3 arena_atomics:FAIL
The reason of the failure is due to [2] where atomic{64,}_fetch_{and,or,xor}() are not
allowed by arena addresses.
Version 2 of the patch fixed the issue by using inline asm ([3]). But further discussion
suggested to find a way from source to generate locked insn which is more user
friendly. So in not-merged llvm patch ([4]), if relax memory ordering is used and
the return value is not used, locked insn could be generated.
So with llvm patch [4] to compile the bpf selftest, the following code
__c11_atomic_fetch_and(&and64_value, 0x011ull << 32, memory_order_relaxed);
is able to generate locked insn, hence fixing the selftest failure.
[1] https://github.com/llvm/llvm-project/pull/106494
[2] d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
[3] https://lore.kernel.org/bpf/20240803025928.4184433-1-yonghong.song@linux.dev/
[4] https://github.com/llvm/llvm-project/pull/107343
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240909223431.1666305-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new set of tests validating behavior of capturing stack traces
with build ID. We extend uprobe_multi target binary with ability to
trigger uprobe (so that we can capture stack traces from it), but also
we allow to force build ID data to be either resident or non-resident in
memory (see also a comment about quirks of MADV_PAGEOUT).
That way we can validate that in non-sleepable context we won't get
build ID (as expected), but with sleepable uprobes we will get that
build ID regardless of it being physically present in memory.
Also, we add a small add-on linker script which reorders
.note.gnu.build-id section and puts it after (big) .text section,
putting build ID data outside of the very first page of ELF file. This
will test all the relaxations we did in build ID parsing logic in kernel
thanks to freader abstraction.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Handle the case where the meta-page content is bigger than the system
page-size. This prepares the ground for extending features covered by
the meta-page.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Link: https://lore.kernel.org/20240910162335.2993310-3-vdonnefort@google.com
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Improve the ring-buffer meta-page test coverage by checking for the
entire padding region to be 0 instead of just looking at the first 4
bytes.
Cc: linux-kselftest@vger.kernel.org
Link: https://lore.kernel.org/20240910162335.2993310-2-vdonnefort@google.com
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add 3 test cases for skb dynptr used in tp_btf:
- test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is
read-only.
- skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb
should fail in fentry/fexit.
In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb,
test_pkt_access is used for its test_run, as in kfree_skb.c. Because the
test process is different from others, a new setup type is defined,
i.e., SETUP_SKB_PROG_TP.
The result is like:
$ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf'
#84/14 dynptr/test_dynptr_skb_tp_btf:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED
$ ./test_progs -t 'dynptr/skb_invalid_ctx_f'
#84/85 dynptr/skb_invalid_ctx_fentry:OK
#84/86 dynptr/skb_invalid_ctx_fexit:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED
Also fix two coding style nits (change spaces to tabs).
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Nolibc gained an implementation of strerror() recently.
Use it and drop the ifndef.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, xskxceiver assumes that MAX_SKB_FRAGS value is always 17
which is not true - since the introduction of BIG TCP this can now take
any value between 17 to 45 via CONFIG_MAX_SKB_FRAGS.
Adjust the TOO_MANY_FRAGS test case to read the currently configured
MAX_SKB_FRAGS value by reading it from /proc/sys/net/core/max_skb_frags.
If running system does not provide that sysctl file then let us try
running the test with a default value.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240910124129.289874-1-maciej.fijalkowski@intel.com
-----BEGIN PGP SIGNATURE-----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=ErGl
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test a few possible cases where we use SOF_TIMESTAMPING_OPT_RX_FILTER
with software or hardware report/generation flag.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like
rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum
Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.
Fixes: 91a7de8560 ("selftests/net: add csum offload test")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In x86's debug_regs test, change the RDMSR(MISC_ENABLES) in the single-step
testcase to a WRMSR(TSC_DEADLINE) in order to verify that KVM honors
KVM_GUESTDBG_SINGLESTEP when handling a fastpath VM-Exit.
Note, the extra coverage is effectively Intel-only, as KVM only handles
TSC_DEADLINE in the fastpath when the timer is emulated via the hypervisor
timer, a.k.a. the VMX preemption timer.
Link: https://lore.kernel.org/r/20240830044448.130449-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Lay the groundwork to import into kselftests the over 150 packetdrill
TCP/IP conformance tests on github.com/google/packetdrill.
Florian recently added support for packetdrill tests in nf_conntrack,
in commit a8a388c2aa ("selftests: netfilter: add packetdrill based
conntrack tests").
This patch takes a slightly different approach. It relies on
ksft_runner.sh to run every *.pkt file in the directory.
Any future imports of packetdrill tests should require no additional
coding. Just add the *.pkt files.
Initially import only two features/directories from github. One with a
single script, and one with two. This was the only reason to pick
tcp/inq and tcp/md5.
The path replaces the directory hierarchy in github with a flat space
of files: $(subst /,_,$(wildcard tcp/**/*.pkt)). This is the most
straightforward option to integrate with kselftests. The Linked thread
reviewed two ways to maintain the hierarchy: TEST_PROGS_RECURSE and
PRESERVE_TEST_DIRS. But both introduce significant changes to
kselftest infra and with that risk to existing tests.
Implementation notes:
- restore alphabetical order when adding the new directory to
tools/testing/selftests/Makefile
- imported *.pkt files and support verbatim from the github project,
except for
- update `source ./defaults.sh` path (to adjust for flat dir)
- add SPDX headers
- remove one author statement
- Acknowledgment: drop an e (checkpatch)
Tested:
make -C tools/testing/selftests \
TARGETS=net/packetdrill \
run_tests
make -C tools/testing/selftests \
TARGETS=net/packetdrill \
install INSTALL_PATH=$KSFT_INSTALL_PATH
# in virtme-ng
./run_kselftest.sh -c net/packetdrill
./run_kselftest.sh -t net/packetdrill:tcp_inq_client.pkt
Link: https://lore.kernel.org/netdev/20240827193417.2792223-1-willemdebruijn.kernel@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905231653.2427327-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support testcases that are themselves not executable, but need an
interpreter to run them.
If a test file is not executable, but an executable file
ksft_runner.sh exists in the TARGET dir, kselftest will run
./ksft_runner.sh ./$BASENAME_TEST
Packetdrill may add hundreds of packetdrill scripts for testing. These
scripts must be passed to the packetdrill process.
Have kselftest run each test directly, as it already solves common
runner requirements like parallel execution and isolation (netns).
A previous RFC added a wrapper in between, which would have to
reimplement such functionality.
Link: https://lore.kernel.org/netdev/66d4d97a4cac_3df182941a@willemb.c.googlers.com.notmuch/T/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905231653.2427327-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is nice to have a visual alignment in the test output to present the
different results, but it makes less sense in the TAP output that is
there for computers.
It sounds then better to remove the duplicated whitespaces in the TAP
output, also because it can cause some issues with TAP parsers expecting
only one space around the directive delimiter (#).
While at it, change the variable name (result_msg) to something more
explicit.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240906-net-next-mptcp-ksft-subtest-time-v2-5-31d5ee4f3bdf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just to slightly improve the precision of the duration of the first
test.
In mptcp_join.sh, the last append_prev_results is now done as soon as
the last test is over: this will add the last result in the list, and
get a more precise time for this last test.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240906-net-next-mptcp-ksft-subtest-time-v2-3-31d5ee4f3bdf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is now added by the MPTCP lib automatically, see the parent commit.
The time in the TAP output might be slightly different from the one
displayed before, but that's OK.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240906-net-next-mptcp-ksft-subtest-time-v2-2-31d5ee4f3bdf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When I was trying to modify the tx timestamping feature, I found that
running "./txtimestamp -4 -C -L 127.0.0.1" didn't reflect the error:
I succeeded to generate timestamp stored in the skb but later failed
to report it to the userspace (which means failed to put css into cmsg).
It can happen when someone writes buggy codes in __sock_recv_timestamp(),
for example.
After adding the check so that running ./txtimestamp will reflect the
result correctly like this if there is a bug in the reporting phase:
protocol: TCP
payload: 10
server port: 9000
family: INET
test SND
USR: 1725458477 s 667997 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 718128 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 768273 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 818416 us (seq=0, len=0)
Failed to report timestamps
...
In the future, it will help us detect whether the new coming patch has
bugs or not.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905160035.62407-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was recently observed at [1] that during the folio unmapping stage of
migration, when the PTEs are cleared, a racing thread faulting on that
folio may increase the refcount of the folio, sleep on the folio lock (the
migration path has the lock), and migration ultimately fails when
asserting the actual refcount against the expected. Thereby, the
migration selftest fails on shared-anon mappings. The above enforces the
fact that migration is a best-effort service, therefore, it is wrong to
fail the test for just a single failure; hence, fail the test after 100
consecutive failures (where 100 is still a subjective choice). Note that,
this has no effect on the execution time of the test since that is
controlled by a timeout.
[1] https://lore.kernel.org/all/20240801081657.1386743-1-dev.jain@arm.com/
Link: https://lkml.kernel.org/r/20240830051609.4037834-1-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@gentwo.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a THP is split, any subpage that is zero-filled will be mapped to the
shared zeropage, hence saving memory. Add selftest to verify this by
allocating zero-filled THP and comparing RssAnon before and after split.
Link: https://lkml.kernel.org/r/20240830100438.3623486-4-usamaarif642@gmail.com
Signed-off-by: Alexander Zhu <alexlzhu@fb.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <zhais@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When "arg#%d expected pointer to ctx, but got %s" error is printed, both
template parts actually point to the type of the argument, therefore, it
will also say "but got PTR", regardless of what was the actual register
type.
Fix the message to print the register type in the second part of the
template, change the existing test to adapt to the new format, and add a
new test to test the case when arg is a pointer to context, but reg is a
scalar.
Fixes: 00b85860fe ("bpf: Rewrite kfunc argument handling")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240909133909.1315460-1-maxim@isovalent.com
Currently exec-target.c is linked statically with libc, which on Fedora
at least requires installing an additional package (glibc-static).
If that package is not installed the build fails with:
CC exec_target
/usr/bin/ld: cannot find -lc: No such file or directory
collect2: error: ld returned 1 exit status
All exec_target.c does is call sys_exit, which can be done easily enough
using inline assembly, and removes the requirement for a static libc to
be installed.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240812094152.418586-1-maddy@linux.ibm.com
* A revert for the mmap() change that ties the allocation range to the
hint adress, as what we tried to do ended up regressing on other
userspace workloads.
* A fix to avoid a kernel memory leak when emulating misaligned accesses
from userspace.
* A Kconfig fix for toolchain vector detection, which now correctly
detects vector support on toolchains where the V extension depends on
the M extension.
* A fix to avoid failing the linear mapping bootmem bounds check on
NOMMU systems.
* A fix for early alternatives on relocatable kernels.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmbbD44THHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiRR/EACqW46mbTmGrbDzbk2YcKbkc05djuB2
+yorDaO6d188xmHM74zEvt1+X+Mxj18pMm+V02L+27JA7asv+JugXQVwfxtZ769w
/XMKGrJTUCMSvFpsbhszbse3vXjc1F9uQ5wNa9o44MHAc2twSkJHtdhZJwkJJ9ru
Od0m99VXWB1gbA1hvCpQBs2uMSzLoU5X2//AaAzVFK1pyskZ7HPqFX16eFcT0gpA
GDNYIKLPVF1pcwS2gkQM7LAwveCsxuEdnLufJs5Coz9BZ/kQJPd3sK/z8Z58ghy2
Db6XXtcYJs64Ndjv1MSowb4rIii/BN2vlMCCT95xHH+tuJR6flXuIZQPpI971V/A
XOCglNQQkmzjJuFKn1/9ZJcVZGITOqDX37iMPW/3bQ/OFG0emBeGqYXKMmScI6f1
TtqiByz2VXNEJBNkQVA37Cj42DVmRg3MCjwy0ACLbqBpMeSbGK7MRNUk258wOp4V
ucmhf50D3a0w8y/3miaAH1Pk+tZz/rtVFkdbibDW3M91cOfdNoAYKhSJPEEnhaGm
pVTvW+usKDdim3nqqTrlZTfFTNF7wFkvoDc11lStgYFK8VoZWuyoBcf1LQ2+ghv9
qP/A5LRnWU4nXCxZG6dKRoZ/VvoGtsKdI6Iatnak4cAbsvXI+7foelgLgWY6aFzk
/ZUtSmWDz1E21Q==
=xYax
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A revert for the mmap() change that ties the allocation range to the
hint adress, as what we tried to do ended up regressing on other
userspace workloads.
- A fix to avoid a kernel memory leak when emulating misaligned
accesses from userspace.
- A Kconfig fix for toolchain vector detection, which now correctly
detects vector support on toolchains where the V extension depends on
the M extension.
- A fix to avoid failing the linear mapping bootmem bounds check on
NOMMU systems.
- A fix for early alternatives on relocatable kernels.
* tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix RISCV_ALTERNATIVE_EARLY
riscv: Do not restrict memory size because of linear mapping on nommu
riscv: Fix toolchain vector detection
riscv: misaligned: Restrict user access to kernel memory
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
By reading the code, I found the macro NSEC_PER_SEC
is never referenced in the code. Just remove it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When resctrl is built on architectures without __cpuid_count()
support, build fails. resctrl uses __cpuid_count() defined in
kselftest.h.
Even though the problem is seen while building resctrl on aarch64,
this error can be seen on any platform that doesn't support CPUID.
CPUID is a x86/x86-64 feature and code paths with CPUID asm commands
will fail to build on all other architectures.
All others tests call __cpuid_count() do so from x86/x86_64 code paths
when _i386__ or __x86_64__ are defined. resctrl is an exception.
Fix the problem by defining __cpuid_count() only when __i386__ or
__x86_64__ are defined in kselftest.h and changing resctrl to call
__cpuid_count() only when __i386__ or __x86_64__ are defined.
In file included from resctrl.h:24,
from cat_test.c:11:
In function ‘arch_supports_noncont_cat’,
inlined from ‘noncont_cat_run_test’ at cat_test.c:326:6:
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:304:17: note: in expansion of macro ‘__cpuid_count’
304 | __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
| ^~~~~~~~~~~~~
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:306:17: note: in expansion of macro ‘__cpuid_count’
306 | __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
Fixes: ae638551ab ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/20240809071059.265914-1-usama.anjum@collabora.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=5Quw
-----END PGP SIGNATURE-----
Merge tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix crash when btf_parse_base() returns an error (Martin Lau)
- Fix out of bounds access in btf_name_valid_section() (Jeongjun Park)
* tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a selftest to check for incorrect names
bpf: add check for invalid name in btf_name_valid_section()
bpf: Fix a crash when btf_parse_base() returns an error pointer
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
- eth: r8152: fix the firmware communication error due to use
of bulk write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmbaMbsACgkQMUZtbf5S
IrtpUg/+J6rNaZuGVTHJQAjdSlMx/HzpN3GIbhYyUSg+iHNclqtxJ706b2vyrG88
Rw5a+f8aQueONNsoFfa/ooU4cGsdO1oYlch0Wtuj5taCqy2SvtVqJAyiuDyNNjU0
BQ1Rf7aRLI7enmEpZJN2FFu106YTVccBcLqhPkx0CPcEjV+p5RvypfeQL72H6ZKx
+7/HzEl4bagHIQW3W1uJGNUdwNP7fP2/Kg7TrTJ1t629nLiJCxKL7LrsmebO5o9a
v+2NxAa1eujTZ1k7ITcM0wYlxKOaGNFF4sT+dA+GfMe+SFssdhGeZYyv1t0zm5VI
3apJ/pSHza1a/hXFa6PaOSw5M5LWn4bJOqeZLl/yIV0upu5xadWqmT0gVay8V9lY
+x/MURGr3seuNRSMsaToHDIq+Us45Dt/qkDDNO/P+9R/BsJKCW05Pfqx3Mr/OHzv
eeCPbXRh4YYBdrUicBWo04gSD+BUA53vW8FC3pxU5ieLOOcX4kOPeb8wNPHcXjMU
73D+kyO1ufsfsFMkd3VfgDI1mMz+xpEuZ6pxs33tJ/1Ny7DdG1Q49xlQVh4Wnobk
uQqUSzdoelOROeg1rwmsIbfwIvj5a5dVIyBu8TDjHlb/rk1QNTkyu+fFmQRWEotL
fQ7U62wXlpoCT8WchSMtiU32IDJ2+Lwhwecguy1Z7kLOLrtL8XU=
=ju86
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
bind_wildcard is compiled but not run, bind_timewait is not compiled.
These two tests complete in a very short time, use the test harness
properly, and seem reasonable to enable.
The author of the tests confirmed via email that these were
intended to be run.
Enable these two tests.
Fixes: 13715acf8a ("selftest: Add test for bind() conflicts.")
Fixes: 2c042e8e54 ("tcp: Add selftest for bind() and TIME_WAIT.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds DENYLIST.riscv64 file for riscv64. It will help BPF CI
and local vmtest to mask failing and unsupported test cases.
We can use the following command to use deny list in local vmtest as
previously mentioned by Manu.
PLATFORM=riscv64 CROSS_COMPILE=riscv64-linux-gnu- vmtest.sh \
-l ./libbpf-vmtest-rootfs-2024.08.30-noble-riscv64.tar.zst -- \
./test_progs -d \
\"$(cat tools/testing/selftests/bpf/DENYLIST.riscv64 \
| cut -d'#' -f1 \
| sed -e 's/^[[:space:]]*//' \
-e 's/[[:space:]]*$//' \
| tr -s '\n' ','\
)\"
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-9-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support cross platform testing for vmtest. The variable $ARCH in the
current script is platform semantics, not kernel semantics. Rename it to
$PLATFORM so that we can easily use $ARCH in cross-compilation. And drop
`set -u` unbound variable check as we will use CROSS_COMPILE env
variable. For now, Using PLATFORM= and CROSS_COMPILE= options will
enable cross platform testing:
PLATFORM=<platform> CROSS_COMPILE=<toolchain> vmtest.sh -- ./test_progs
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-7-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Support vmtest to use local rootfs image generated by [0] that is
consistent with BPF CI. Now we can specify the local rootfs image
through the `-l` parameter like as follows:
vmtest.sh -l ./libbpf-vmtest-rootfs-2024.08.22-noble-amd64.tar.zst -- ./test_progs
Meanwhile, some descriptions have been flushed.
Link: https://github.com/libbpf/ci/blob/main/rootfs/mkrootfs_debian.sh [0]
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-6-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The URLS array is only valid in the download_rootfs function and does
not need to be parsed globally in advance. At the same time, the logic
of loading rootfs is refactored to prepare vmtest for supporting local
rootfs.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-5-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is not always convenient to have LLVM libraries installed inside CI
rootfs images, thus request static libraries from llvm-config.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240905081401.1894789-4-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, when compiling bpf selftests on RV64, the following
compilation failure occurred:
progs/bpf_dctcp.c:29:21: error: redefinition of 'fallback' as different kind of symbol
29 | volatile const char fallback[TCP_CA_NAME_MAX];
| ^
/workspace/tools/testing/selftests/bpf/tools/include/vmlinux.h:86812:15: note: previous definition is here
86812 | typedef u32 (*fallback)(u32, const unsigned char *, size_t);
The reason is that the `fallback` symbol has been defined in
arch/riscv/lib/crc32.c, which will cause symbol conflicts when vmlinux.h
is included in bpf_dctcp. Let we rename `fallback` string to
`fallback_cc` in bpf_dctcp to fix this compilation failure.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-3-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The $(let ...) function is only supported by GNU Make version 4.4 [0]
and above, otherwise the following exception file or directory will be
generated:
tools/testing/selftests/bpfFEATURE-DUMP.selftests
tools/testing/selftests/bpffeature/
Considering that the GNU Make version of most Linux distributions is
lower than 4.4, let us adapt the corresponding logic to it.
Link: https://lists.gnu.org/archive/html/info-gnu/2022-10/msg00008.html [0]
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-2-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The idea is to run same test as for test_pid_filter_process, but instead
of standard fork-ed process we create the process with clone(CLONE_VM..)
to make sure the thread leader process filter works properly in this case.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-5-jolsa@kernel.org
The idea is to create and monitor 3 uprobes, each trigered in separate
process and make sure the bpf program gets executed just for the proper
PID specified via pid filter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-4-jolsa@kernel.org
With uprobe_unregister() having grown a synchronize_srcu(), it becomes
fairly slow to call. Esp. since both users of this API call it in a
loop.
Peel off the sync_srcu() and do it once, after the loop.
We also need to add uprobe_unregister_sync() into uprobe_register()'s
error handling path, as we need to be careful about returning to the
caller before we have a guarantee that partially attached consumer won't
be called anymore. This is an unlikely slow path and this should be
totally fine to be slow in the case of a failed attach.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-6-andrii@kernel.org
Filter out nodes that have one of its ancestors disabled as they aren't
expected to probe.
This removes the following false-positive failures on the
sc7180-trogdor-lazor-limozeen-nots-r5 platform:
/soc@0/geniqup@8c0000/i2c@894000/proximity@28
/soc@0/geniqup@ac0000/spi@a90000/ec@0
/soc@0/remoteproc@62400000/glink-edge/apr
/soc@0/remoteproc@62400000/glink-edge/apr/service@3
/soc@0/remoteproc@62400000/glink-edge/apr/service@4
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/clock-controller
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@7
/soc@0/remoteproc@62400000/glink-edge/apr/service@7/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@8
/soc@0/remoteproc@62400000/glink-edge/apr/service@8/routing
/soc@0/remoteproc@62400000/glink-edge/fastrpc
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@3
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@4
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@5
/soc@0/spmi@c440000/pmic@0/pon@800/pwrkey
Fixes: 14571ab1ad ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240729-dt-kselftest-parent-disabled-v2-1-d7a001c4930d@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Considering that CO-RE direct read access to the first system call
argument is already available on s390 and arm64, let's enable
test_bpf_syscall_macro:syscall_arg1 on these architectures.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240831041934.1629216-4-pulehui@huaweicloud.com
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904014441.1065753-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core part of the selftest, i.e., the je <-> jmp cycle, mimics the
original sched-ext bpf program. The test will fail without the
previous patch.
I tried to create some cases for other potential cycles
(je <-> je, jmp <-> je and jmp <-> jmp) with similar pattern
to the test in this patch, but failed. So this patch
only contains one test for je <-> jmp cycle.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240904221256.37389-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf/master to receive baebe9aaba ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterator patchset.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix eventfs ownership testcase to find mount point if stat -c "%m" failed.
This can happen on the system based on busybox. In this case, this will
try to use the current working directory, which should be a tracefs top
directory (and eventfs is mounted as a part of tracefs.)
If it does not work, the test is skipped as UNRESOLVED because of
the environmental problem.
Fixes: ee9793be08 ("tracing/selftests: Add ownership modification tests for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add sched_ext_ops operations to init/exit cgroups, and track task migrations
and config changes. A BPF scheduler may not implement or implement only
subset of cgroup features. The implemented features can be indicated using
%SCX_OPS_HAS_CGOUP_* flags. If cgroup configuration makes use of features
that are not implemented, a warning is triggered.
While a BPF scheduler is being enabled and disabled, relevant cgroup
operations are locked out using scx_cgroup_rwsem. This avoids situations
like task prep taking place while the task is being moved across cgroups,
making things easier for BPF schedulers.
v7: - cgroup interface file visibility toggling is dropped in favor just
warning messages. Dynamically changing interface visiblity caused more
confusion than helping.
v6: - Updated to reflect the removal of SCX_KF_SLEEPABLE.
- Updated to use CONFIG_GROUP_SCHED_WEIGHT and fixes for
!CONFIG_FAIR_GROUP_SCHED && CONFIG_EXT_GROUP_SCHED.
v5: - Flipped the locking order between scx_cgroup_rwsem and
cpus_read_lock() to avoid locking order conflict w/ cpuset. Better
documentation around locking.
- sched_move_task() takes an early exit if the source and destination
are identical. This triggered the warning in scx_cgroup_can_attach()
as it left p->scx.cgrp_moving_from uncleared. Updated the cgroup
migration path so that ops.cgroup_prep_move() is skipped for identity
migrations so that its invocations always match ops.cgroup_move()
one-to-one.
v4: - Example schedulers moved into their own patches.
- Fix build failure when !CONFIG_CGROUP_SCHED, reported by Andrea Righi.
v3: - Make scx_example_pair switch all tasks by default.
- Convert to BPF inline iterators.
- scx_bpf_task_cgroup() is added to determine the current cgroup from
CPU controller's POV. This allows BPF schedulers to accurately track
CPU cgroup membership.
- scx_example_flatcg added. This demonstrates flattened hierarchy
implementation of CPU cgroup control and shows significant performance
improvement when cgroups which are nested multiple levels are under
competition.
v2: - Build fixes for different CONFIG combinations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrea Righi <andrea.righi@canonical.com>
Add selftest for cases where btf_name_valid_section() does not properly
check for certain types of names.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240831054742.364585-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
When the PROCMAP_QUERY is not defined, a compilation error occurs due to the
mismatch of the procmap_query()'s params, procmap_query() only be called in
the file where the function is defined, modify the params so they can match.
We get a warning when build samples/bpf:
trace_helpers.c:252:5: warning: no previous prototype for ‘procmap_query’ [-Wmissing-prototypes]
252 | int procmap_query(int fd, const void *addr, __u32 query_flags, size_t *start, size_t *offset, int *flags)
| ^~~~~~~~~~~~~
As this function is only used in the file, mark it as 'static'.
Fixes: 4e9e07603e ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Link: https://lore.kernel.org/r/20240903012839.3178-1-chenyuan_fl@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do
three things:
1. rename tcp_so_peek_off.c
2. adjust for UDP protocol
3. add selftests into it
Suggested-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that we get signal context for POR_EL0 if and only if POE is present
on the system.
Copied from the TPIDR2 test.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-30-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Teach the signal frame parsing about the new POE frame, avoids warning when it
is generated.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-29-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Check that when POE is enabled, the POR_EL0 register is accessible.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-28-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The encoding of the pkey register differs on arm64, than on x86/ppc. On those
platforms, a bit in the register is used to disable permissions, for arm64, a
bit enabled in the register indicates that the permission is allowed.
This drops two asserts of the form:
assert(read_pkey_reg() <= orig_pkey_reg);
Because on arm64 this doesn't hold, due to the encoding.
The pkey must be reset to both access allow and write allow in the signal
handler. pkey_access_allow() works currently for PowerPC as the
PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE have overlapping bits set.
Access to the uc_mcontext is abstracted, as arm64 has a different structure.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-27-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
arm64's fpregs are not at a constant offset from sigcontext. Since this is
not an important part of the test, don't print the fpregs pointer on arm64.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-26-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Put this function in the header so that it can be used by other tests, without
needing to link to testcases.c.
This will be used by selftest/mm/protection_keys.c
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-25-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Some test scripts are missing executable permissions. It causes warnings
that make the test output unnecessarily verbose. Add executable
permissions.
Link: https://lkml.kernel.org/r/20240827030336.7930-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Python-based tests creates __pycache__/ directory. Remove it with 'make
clean' by defining it as EXTRA_CLEAN.
Link: https://lkml.kernel.org/r/20240827030336.7930-3-sj@kernel.org
Fixes: b5906f5f73 ("selftests/damon: add a test for update_schemes_tried_regions sysfs command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "misc fixups for DAMON {self,kunit} tests".
This patchset is for minor fixups of DAMON selftests and kunit tests.
First three patches make DAMON selftests more cleanly maintained (patches
1 and 2) without unnecessary warnings (patch 3). Following six patches
remove unnecessary test case (patch 4), handle configs combinations that
can make tests fail (patches 5-7), reorganize the test files following the
new guideline (patch 8), and add reference kunitconfig for DAMON kunit
tests (patch 9).
This patch (of 9):
DAMON selftests build access_memory_even, but its not on the .gitignore
list. Add it to make 'git status' output cleaner.
Link: https://lkml.kernel.org/r/20240827030336.7930-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240827030336.7930-2-sj@kernel.org
Fixes: c94df805c7 ("selftests/damon: implement a program for even-numbered memory regions access")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ensure that zswap.writeback check goes up the cgroup tree, i.e. is
hierarchical. Create a subcgroup which has zswap.writeback set to 1, and
the upper hierarchy's restrictions shall apply.
Link: https://lkml.kernel.org/r/20240823162506.12117-2-me@yhndnzj.com
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, running the charge_reserved_hugetlb.sh selftest we can
sometimes observe something like:
$ ./charge_reserved_hugetlb.sh -cgroup-v2
...
write_result is 0
After write:
hugetlb_usage=0
reserved_usage=10485760
killing write_to_hugetlbfs
Received 2.
Deleting the memory
Detach failure: Invalid argument
umount: /mnt/huge: target is busy.
Both cases are issues in the test.
While the unmount error seems to be racy, it will make the test fail:
$ ./run_vmtests.sh -t hugetlb
...
# [FAIL]
not ok 10 charge_reserved_hugetlb.sh -cgroup-v2 # exit=32
The issue is that we are not waiting for the write_to_hugetlbfs process to
quit. So it might still have a hugetlbfs file open, about which umount is
not happy. Fix that by making "killall" wait for the process to quit.
The other error ("Detach failure: Invalid argument") does not seem to
result in a test error, but is misleading. Turns out write_to_hugetlbfs.c
unconditionally tries to cleanup using shmdt(), even when we only
mmap()'ed a hugetlb file. Even worse, shmaddr is never even set for the
SHM case. Fix that as well.
With this change it seems to work as expected.
Link: https://lkml.kernel.org/r/20240821123115.2068812-1-david@redhat.com
Fixes: 29750f71a9 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add more mseal traversal tests across VMAs, where we could possibly screw
up sealing checks. These test more across-vma traversal for mprotect,
munmap and madvise. Particularly, we test for the case where a regular
VMA is followed by a sealed VMA.
[akpm@linux-foundation.org: remove incorrect comment, per review]
[akpm@linux-foundation.org: remove the correct comment, per Pedro]
[pedro.falcato@gmail.com: fix mseal's length]
Link: https://lkml.kernel.org/r/vc4czyuemmu3kylqb4ctaga6y5yvondlyabimx6jvljlw2fkea@djawlllf45xa
Link: https://lkml.kernel.org/r/20240817-mseal-depessimize-v3-7-d8d2e037df30@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add shmem mTHP collpase testing. Similar to the anonymous page, users can
use the '-s' parameter to specify the shmem mTHP size for testing.
Link: https://lkml.kernel.org/r/fa44bfa20ca5b9fd6f9163a048f3d3c1e53cd0a8.1724140601.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
IA64 has gone with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"), so remove unnecessary ia64 special mm code and comment in
selftests too.
Link: https://lkml.kernel.org/r/20240819130609.3386195-1-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'MPTCP_PM_NAME' is defined in 'linux/mptcp_pm.h', included in
'linux/mptcp.h', no need to re-define it.
'MPTCP_PM_EVENTS' is not defined in 'linux/mptcp.h', but
'MPTCP_PM_EV_GRP_NAME' is, with the same value. We can then use the
latter, and drop the other one.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-11-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The four checksum tests are similar, only one line is different. So
a for-loop can be used to simplify these tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-10-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test is supposed to be killed before the end, which will likely
cause "Connection reset by peer" errors. It is confusing, especially
because in case of real transfer errors, the test will not be marked as
failed. But that's OK, there are many other tests checking that.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-9-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of displaying 'invert' when looking at some events like MP_FAIL,
MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are
not traditionnaly sent from one side, the host being checked is now
printed.
For the ADD_ADDR, only display the host when it is the client sending
it, which is more unusual.
Also before, the 'invert' message was printed after a few checks, but it
was not clear which ones exactly.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, the check names had to be very short. It is no longer the case
now that these checks are printed on a dedicated line.
Then, it looks better to have more explicit names.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-7-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few new MPJoinSynTx MIB counters have been added in a previous commit.
They are being validated here in mptcp_join.sh selftest, each time the
number of received MPJ are checked.
Most of the time, the number of sent SYN+MPJ is the same as the received
ones. But sometimes, there are more, because there are dropped, or there
are errors.
While at it, the "no MPC reuse with single endpoint" subtest has been
modified to force a bind() error.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-6-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most tests are checking if the expected number of SYN/SYN+ACK/ACK JOINs
have been received, each of them on one line.
More Join related tests are going to be checked soon, no need to add 5
new lines per test in case of success, just one is enough. In case of
issue, the errors will still be reported like before.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-5-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chk_join_nr() currently takes 9 positional parameters, 6 of them are
optional. It makes it hard to read:
chk_join_nr 1 1 1 1 0 1 1 0 4
Naming these vars helps to make it easier to read:
join_csum_ns1=1 join_csum_ns2=0 \
join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \
join_corrupted_pkts=4 \
chk_join_nr 1 1 1
It will then be easier to add new optional parameters.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-4-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add return value checks for read & write calls in test_listmount_ns
function. This patch resolves below compilation warnings:
```
statmount_test_ns.c: In function ‘test_listmount_ns’:
statmount_test_ns.c:322:17: warning: ignoring return value of ‘write’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
statmount_test_ns.c:323:17: warning: ignoring return value of ‘read’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
```
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The sctp selftest is very slow on debug kernels.
Its possible that the nf_queue listener program exits due to timeout
before first sctp packet is processed.
In this case socat hangs until script times out.
Fix this by removing the -t option where possible and kill the test
program once the file transfer/socat has exited.
-t sets SO_RCVTIMEO, its inteded for the 'ping' part of the selftest
where we want to make sure that packets get reinjected properly without
skipping a second queue request.
While at it, add a helper to compare the (binary) files instead of diff.
The 'diff' part was copied from a another sub-test that compares text.
Let helper dump file sizes on error so we can see the progress made.
Tested on an old 2010-ish box with a debug kernel and 100 iterations.
This is a followup to the earlier filesize reduction change.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240829080109.GB30766@breakpoint.cc/
Fixes: 0a8b08c554 ("selftests: netfilter: nft_queue.sh: reduce test file size for debug build")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240830092254.8029-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
the syscall remap accepts following:
mremap(src, size, size, MREMAP_MAYMOVE | MREMAP_DONTUNMAP, dst)
when the src is sealed, the call will fail with error code:
EPERM
Previously, the test uses hard-coded 0xdeaddead as dst, and it
will fail on the system with newer glibc installed.
This patch removes test's dependency on glibc for mremap(), also
fix the test and remove the hardcoded address.
Link: https://lkml.kernel.org/r/20240807212320.2831848-1-jeffxu@chromium.org
Fixes: 4926c7a52d ("selftest mm/mseal memory sealing")
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add an mseal test for madvise() operations that aren't considered
"discard" (e.g purely advisory ops such as MADV_RANDOM).
[pedro.falcato@gmail.com: adjust the mseal test's plan]
Link: https://lkml.kernel.org/r/20240807203724.2686144-1-pedro.falcato@gmail.com
Link: https://lkml.kernel.org/r/20240807173336.2523757-3-pedro.falcato@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend two existing tests to cover extracting memory usage through the
newly mutable memory.peak and memory.swap.peak handlers.
In particular, make sure to exercise adding and removing watchers with
overlapping lifetimes so the less-trivial logic gets tested.
The new/updated tests attempt to detect a lack of the write handler by
fstat'ing the memory.peak and memory.swap.peak files and skip the tests if
that's the case. Additionally, skip if the file doesn't exist at all.
[davidf@vimeo.com: update tests]
Link: https://lkml.kernel.org/r/20240730231304.761942-3-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-3-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The __NR_mmap isn't found on armhf. The mmap() is commonly available
system call and its wrapper is present on all architectures. So it should
be used directly. It solves problem for armhf and doesn't create problem
for other architectures.
Remove sys_mmap() functions as they aren't doing anything else other than
calling mmap(). There is no need to set errno = 0 manually as glibc
always resets it.
For reference errors are as following:
CC seal_elf
seal_elf.c: In function 'sys_mmap':
seal_elf.c:39:33: error: '__NR_mmap' undeclared (first use in this function)
39 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
mseal_test.c: In function 'sys_mmap':
mseal_test.c:90:33: error: '__NR_mmap' undeclared (first use in this function)
90 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
Link: https://lkml.kernel.org/r/20240809082511.497266-1-usama.anjum@collabora.com
Fixes: 4926c7a52d ("selftest mm/mseal memory sealing")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is only hotplug test for cpuset v1, just add base read/write test
for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since isolated CPUs can be reserved at boot time via the "isolcpus"
boot command line option, these pre-isolated CPUs may interfere with
testing done by test_cpuset_prs.sh.
With the previous commit that incorporates those boot time isolated CPUs
into "cpuset.cpus.isolated", we can check for those before testing is
started to make sure that there will be no interference. Otherwise,
this test will be skipped if incorrect test failure can happen.
As "cpuset.cpus.isolated" is now available in a non cgroup_debug kernel,
we don't need to check for its existence anymore.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
%.bpf.o objects depend on vmlinux.h, which makes them transitively
dependent on unnecessary libbpf headers. However vmlinux.h doesn't
actually change as often.
When generating vmlinux.h, compare it to a previous version and update
it only if there are changes.
Example of build time improvement (after first clean build):
$ touch ../../../lib/bpf/bpf.h
$ time make -j8
Before: real 1m37.592s
After: real 0m27.310s
Notice that %.bpf.o gen step is skipped if vmlinux.h hasn't changed.
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzY1z5cC7BKye8=A8aTVxpsCzD=p1jdTfKC7i0XVuYoHUQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20240828174608.377204-2-ihor.solodrai@pm.me
Including:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
-----BEGIN PGP SIGNATURE-----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=8XuD
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
Create a BTF with endianness different from host, make a distilled
base/split BTF pair from it, dump as raw bytes, import again and
verify that endianness is preserved.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240830173406.1581007-1-eddyz87@gmail.com
When building with clang, there's this warning:
vdso_test_getrandom.c:145:40: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
145 | static void *test_vdso_getrandom(void *)
| ^
vdso_test_getrandom.c:155:40: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
155 | static void *test_libc_getrandom(void *)
| ^
vdso_test_getrandom.c:165:43: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
165 | static void *test_syscall_getrandom(void *)
Add the named ctx parameter to quash it.
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
A "%s" is missing in ksft_exit_fail_msg(); instead, use the newly
introduced ksft_exit_fail_perror().
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240830052911.4040970-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
vdso_test_correctness test fails on powerpc:
~ # ./vdso_test_correctness
...
[RUN] Testing clock_gettime for clock CLOCK_REALTIME_ALARM (8)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_BOOTTIME_ALARM (9)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_SGI_CYCLE (10)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
...
[RUN] Testing clock_gettime for clock invalid (-1)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (-2147483648)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (2147483647)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
On powerpc, a call to a VDSO function is not an ordinary C function
call. Unlike several architectures which returns a negative error code
in case of an error, powerpc sets CR[SO] and returns the error code
as a positive value.
Define and use a macro called VDSO_CALL() which takes a pointer
to the function to call, the number of arguments and the arguments.
Also update ABI vdso documentation to reflect this subtlety.
Provide a specific version of VDSO_CALL() for powerpc that negates
the error code on return when CR[SO] is set.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Fixes: 2e9a972566 ("selftests: vdso: Add a selftest for vDSO getcpu()")
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Fixes: b2f1c3db28 ("kselftest: Extend vdso correctness test to clock_gettime64")
Fixes: 4920a2590e ("selftests/vDSO: add tests for vgetrandom")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Running vdso_test_correctness on powerpc64 gives the following warning:
~ # ./vdso_test_correctness
Warning: failed to find clock_gettime64 in vDSO
This is because vdso_test_correctness was built with VDSO_32BIT defined.
__powerpc__ macro is defined on both powerpc32 and powerpc64 so
__powerpc64__ needs to be checked first in vdso_config.h
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Following error occurs when running vdso_test_correctness on powerpc:
~ # ./vdso_test_correctness
[WARN] failed to find vDSO
[SKIP] No vDSO, so skipping clock_gettime() tests
[SKIP] No vDSO, so skipping clock_gettime64() tests
[RUN] Testing getcpu...
[OK] CPU 0: syscall: cpu 0, node 0
On powerpc, vDSO is neither called linux-vdso.so.1 nor linux-gate.so.1
but linux-vdso32.so.1 or linux-vdso64.so.1.
Also search those two names before giving up.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If the getrandom test compiles for an arch, don't exit fatally if the
actual cpu it's running on is unsupported.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Building test_vdso_getrandom currently leads to following issue:
In file included from /home/xry111/git-repos/linux/tools/include/linux/compiler_types.h:36,
from /home/xry111/git-repos/linux/include/uapi/linux/stddef.h:5,
from /home/xry111/git-repos/linux/include/uapi/linux/posix_types.h:5,
from /usr/include/asm/sigcontext.h:12,
from /usr/include/bits/sigcontext.h:30,
from /usr/include/signal.h:301,
from vdso_test_getrandom.c:14:
/home/xry111/git-repos/linux/tools/include/linux/compiler-gcc.h:3:2: error: #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
3 | #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
| ^~~~~
It's because the compiler_types.h inclusion in
include/uapi/linux/stddef.h is expected to be removed by the
header_install.sh script, as compiler_types.h shouldn't be used from
user space.
Add KHDR_INCLUDES before the existing include/uapi inclusion so that
usr/include takes precedence if it's populated.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
CONFIG_FUNCTION_ALIGNMENT=0 is no longer necessary and BULID_VDSO wasn't
spelled right while BUILD_VDSO isn't necessary, so just remove these.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
On systems that set -Wl,--as-needed, putting the -lsodium in the wrong
place on the command line means we get a linker error:
CC vdso_test_chacha
/usr/bin/ld: /tmp/ccKpjnSM.o: in function `main':
vdso_test_chacha.c:(.text+0x276): undefined reference to `crypto_stream_chacha20'
collect2: error: ld returned 1 exit status
Fix this by passing pkg-config's --libs output to the LDFLAGS field
instead of the CFLAGS field, as is customary.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When libsodium is installed into its own prefix, the --cflags output is
needed for the compiler to find libsodium headers.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Don't hard-code x86 specific names. Rather, use vdso_config definitions
to find the correct function matching the architecture.
Add random VDSO function names in names[][]. Remove the #ifdef
CONFIG_VDSO32, as having the name there all the time is harmless and
guaranties a steady index for following strings.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[Jason: add [6] to variable declaration rather than each usage site.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Building test_vdso_chacha currently leads to following issue:
In file included from /home/chleroy/linux-powerpc/include/linux/limits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/local_lim.h:38,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/posix1_lim.h:161,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/limits.h:195,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:203,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/syslimits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:34,
from /tmp/sodium/usr/local/include/sodium/export.h:7,
from /tmp/sodium/usr/local/include/sodium/crypto_stream_chacha20.h:14,
from vdso_test_chacha.c:6:
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:99:6: error: missing binary operator before token "("
99 | # if INT_MAX == 32767
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:102:7: error: missing binary operator before token "("
102 | # if INT_MAX == 2147483647
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:126:6: error: missing binary operator before token "("
126 | # if LONG_MAX == 2147483647
| ^~~~~~~~
This is due to kernel include/linux/limits.h being included instead of
libc's limits.h.
This is because directory include/ is added through option -isystem so
it goes prior to glibc's include directory.
Replace -isystem by -idirafter.
But this implies that now tools/include/linux/linkage.h is included
instead of include/linux/linkage.h, so define a stub for
SYM_FUNC_START() and SYM_FUNC_END().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Architectures use different location for vDSO sources:
arch/mips/vdso
arch/sparc/vdso
arch/arm64/kernel/vdso
arch/riscv/kernel/vdso
arch/csky/kernel/vdso
arch/x86/um/vdso
arch/x86/entry/vdso
arch/powerpc/kernel/vdso
arch/arm/vdso
arch/loongarch/vdso
Don't hard-code vdso sources location in selftest Makefile. Instead
create a vdso/ symbolic link in tools/arch/$arch/ and update Makefile
accordingly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than using pthread_get/set_specific, just use gcc's __thread
annotation, which is noticeably faster and makes the code more obvious.
Also, just have one simplified struct called vgrnd, instead of trying to
split things up semantically. Those divisions were useful when this code
was split across several commit *messages*, but doesn't make as much
sense within a single file. This should make the code more clear and
provide a better example for implementers.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The test case for SME vector length changes via sigreturn use a bit too
much cut'n'paste and only actually changed the SVE vector length in the
test itself. Andre's recent factoring out of the initialisation code caused
this to be exposed and the test to start failing. Fix the test to actually
cover the thing it's supposed to test.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240829-arm64-sme-signal-vl-change-test-v1-1-42d7534cb818@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a new arch_timer_edge_cases selftests that validates:
* timers above the max TVAL value
* timers in the past
* moving counters ahead and behind pending timers
* reprograming timers
* timers fired multiple times
* masking/unmasking using the timer control mask
These are intentionally unusual scenarios to stress compliance with
the arm architecture.
Co-developed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-3-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Break up the asm instructions poking daifclr and daifset to handle
interrupts. R_RBZYL specifies pending interrupts will be handle after
context synchronization events such as an ISB.
Introduce a function wrapper for the WFI instruction.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-2-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add KVM selftests' one-off assets, e.g. the Makefile, to the .gitignore so
that they are explicitly included. The justification for omitting the
one-offs was that including them wouldn't help prevent mistakes:
Deliberately do not include the one-off assets, e.g. config, settings,
.gitignore itself, etc as Git doesn't ignore files that are already in
the repository. Adding the one-off assets won't prevent mistakes where
developers forget to --force add files that don't match the "allowed".
Turns out that's not the case, as W=1 will generate warnings, and the
amazing-as-always kernel test bot reports new warnings:
tools/testing/selftests/kvm/.gitignore: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/Makefile: warning: ignored by one of the .gitignore files
>> tools/testing/selftests/kvm/Makefile.kvm: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/config: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/settings: warning: ignored by one of the .gitignore files
Fixes: 43e96957e8 ("KVM: selftests: Use pattern matching in .gitignore")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408211818.85zIkDEK-lkp@intel.com
Link: https://lore.kernel.org/r/20240828215800.737042-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test to verify that KVM correctly exits (or not) when a vCPU's
coalesced I/O ring is full (or isn't). Iterate over all legal starting
points in the ring (with an empty ring), and verify that KVM doesn't exit
until the ring is full.
Opportunistically verify that KVM exits immediately on non-coalesced I/O,
either because the MMIO/PIO region was never registered, or because a
previous region was unregistered.
This is a regression test for a KVM bug where KVM would prematurely exit
due to bad math resulting in a false positive if the first entry in the
ring was before the halfway mark. See commit 92f6d41304 ("KVM: Fix
coalesced_mmio_has_room() to avoid premature userspace exit").
Enable the test for x86, arm64, and risc-v, i.e. all architectures except
s390, which doesn't have MMIO.
On x86, which has both MMIO and PIO, interleave MMIO and PIO into the same
ring, as KVM shouldn't exit until a non-coalesced I/O is encountered,
regardless of whether the ring is filled with MMIO, PIO, or both.
Lastly, wrap the coalesced I/O ring in a structure to prepare for a
potential future where KVM supports multiple ring buffers beyond KVM's
"default" built-in buffer.
Link: https://lore.kernel.org/all/20240820133333.1724191-1-ilstam@amazon.com
Cc: Ilias Stamatis <ilstam@amazon.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240828181446.652474-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Regression test for ae20eef5 ("KVM: SVM: Update SEV-ES shutdown intercepts
with more metadata"). Test confirms userspace is correctly indicated of
a guest shutdown not previous behavior of an EINVAL from KVM_RUN.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Alper Gun <alpergun@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Tested-by: Pratik R. Sampat <pratikrajesh.sampat@amd.com>
Link: https://lore.kernel.org/r/20240709182936.146487-1-pgonda@google.com
[sean: clobber IDT to ensure #UD leads to SHUTDOWN]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Unlink memory regions when freeing a VM, even though it's not strictly
necessary since all tracking structures are freed soon after. The time
spent deleting entries is negligible, and not unlinking entries is
confusing, e.g. it's easy to overlook that the tree structures are
freed by the caller.
Link: https://lore.kernel.org/r/20240802201429.338412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove sefltests' kvm_memcmp_hva_gva(), which has literally never had a
single user since it was introduced by commit 783e9e5126 ("kvm:
selftests: add API testing infrastructure").
Link: https://lore.kernel.org/r/20240802200853.336512-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This patch adds test cases for iter next method returning valid
pointer, which can also used as usage examples.
Currently iter next method should return valid pointer.
iter_next_trusted is the correct usage and test if iter next method
return valid pointer. bpf_iter_task_vma_next has KF_RET_NULL flag,
so the returned pointer may be NULL. We need to check if the pointer
is NULL before using it.
iter_next_trusted_or_null is the incorrect usage. There is no checking
before using the pointer, so it will be rejected by the verifier.
iter_next_rcu and iter_next_rcu_or_null are similar test cases for
KF_RCU_PROTECTED iterators.
iter_next_rcu_not_trusted is used to test that the pointer returned by
iter next method of KF_RCU_PROTECTED iterator cannot be passed in
KF_TRUSTED_ARGS kfuncs.
iter_next_ptr_mem_not_trusted is used to test that base type
PTR_TO_MEM should not be combined with type flag PTR_TRUSTED.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848709758F6922F02AF9F1F99962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tests the epilogue patching when the main prog has
multiple BPF_EXIT. The verifier should have patched the 2nd (and
later) BPF_EXIT with a BPF_JA that goes back to the earlier
patched epilogue instructions.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a pro/epilogue test when the main prog has a goto insn
that goes back to the very first instruction of the prog. It is
to test the correctness of the adjust_jmp_off(prog, 0, delta)
after the verifier has applied the prologue and/or epilogue patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a gen_epilogue test to test a main prog
using a bpf_tail_call.
A non test_loader test is used. The tailcall target program,
"test_epilogue_subprog", needs to be used in a struct_ops map
before it can be loaded. Another struct_ops map is also needed
to host the actual "test_epilogue_tailcall" struct_ops program
that does the bpf_tail_call. The earlier test_loader patch
will attach all struct_ops maps but the bpf_testmod.c does
not support >1 attached struct_ops.
The earlier patch used the test_loader which has already covered
checking for the patched pro/epilogue instructions. This is done
by the __xlated tag.
This patch goes for the regular skel load and syscall test to do
the tailcall test that can also allow to directly pass the
the "struct st_ops_args *args" as ctx_in to the
SEC("syscall") program.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test adds a new struct_ops "bpf_testmod_st_ops" in bpf_testmod.
The ops of the bpf_testmod_st_ops is triggered by new kfunc calls
"bpf_kfunc_st_ops_test_*logue". These new kfunc calls are
primarily used by the SEC("syscall") program. The test triggering
sequence is like:
SEC("syscall")
syscall_prologue(struct st_ops_args *args)
bpf_kfunc_st_op_test_prologue(args)
st_ops->test_prologue(args)
.gen_prologue adds 1000 to args->a
.gen_epilogue adds 10000 to args->a
.gen_epilogue will also set the r0 to 2 * args->a.
The .gen_prologue and .gen_epilogue of the bpf_testmod_st_ops
will test the prog->aux->attach_func_name to decide if
it needs to generate codes.
The main programs of the pro_epilogue.c will call a
new kfunc bpf_kfunc_st_ops_inc10 which does "args->a += 10".
It will also call a subprog() which does "args->a += 1".
This patch uses the test_loader infra to check the __xlated
instructions patched after gen_prologue and/or gen_epilogue.
The __xlated check is based on Eduard's example (Thanks!) in v1.
args->a is returned by the struct_ops prog (either the main prog
or the epilogue). Thus, the __retval of the SEC("syscall") prog
is checked. For example, when triggering the ops in the
'SEC("struct_ops/test_epilogue") int test_epilogue'
The expected args->a is +1 (subprog call) + 10 (kfunc call)
+ 10000 (.gen_epilogue) = 10011.
The expected return value is 2 * 10011 (.gen_epilogue).
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In test_loader based tests to bpf_map__attach_struct_ops()
before call to bpf_prog_test_run_opts() in order to trigger
bpf_struct_ops->reg() callbacks on kernel side.
This allows to use __retval macro for struct_ops tests.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When AVIC, and thus IPI virtualization on AMD, is enabled, the CPU will
virtualize ICR writes. Unfortunately, the CPU doesn't do a very good job,
as it fails to clear the BUSY bit and also allows writing ICR2[23:0],
despite them being "RESERVED MBZ". Account for the quirky behavior in
the xapic_state test to avoid failures in a configuration that likely has
no hope of ever being enabled in production.
Link: https://lore.kernel.org/r/20240719235107.3023592-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that the BUSY bit mess is gone (for x2APIC), verify that the *guest*
can read back the ICR value that it wrote. Due to the divergent
behavior between AMD and Intel with respect to the backing storage of the
ICR in the vAPIC page, emulating a seemingly simple MSR write is quite
complex.
Link: https://lore.kernel.org/r/20240719235107.3023592-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Actually test x2APIC ICR reserved bits instead of deliberately skipping
them. The behavior that is observed when IPI virtualization is enabled is
the architecturally correct behavior, KVM is the one who was wrong, i.e.
KVM was missing reserved bit checks.
Fixes: 4b88b1a518 ("KVM: selftests: Enhance handling WRMSR ICR register in x2APIC mode")
Link: https://lore.kernel.org/r/20240719235107.3023592-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't test the ICR BUSY bit when x2APIC is enabled as AMD and Intel have
different behavior (AMD #GPs, Intel ignores), and the fact that the CPU
performs the reserved bit checks when IPI virtualization is enabled makes
it impossible for KVM to precisely emulate one or the other.
Link: https://lore.kernel.org/r/20240719235107.3023592-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to allow and expect #GP on x2APIC MSRs, and opportunistically
have the existing helper spit out a more useful error message if an
unexpected exception occurs.
Link: https://lore.kernel.org/r/20240719235107.3023592-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that selftests support printf() in the guest, report unexpected
exceptions via the regular assertion framework. Exceptions were special
cased purely to provide a better error message. Convert only x86 for now,
as it's low-hanging fruit (already formats the assertion in the guest),
and converting x86 will allow adding asserts in x86 library code without
needing to update multiple tests.
Once all other architectures are converted, this will allow moving the
reporting to common code, which will in turn allow adding asserts in
common library code, and will also allow removing UCALL_UNHANDLED.
Link: https://lore.kernel.org/r/20240719235107.3023592-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Open code a version of vcpu_run() in the guest_printf test in anticipation
of adding UCALL_ABORT handling to _vcpu_run(). The guest_printf test
intentionally generates asserts to verify the output, and thus needs to
bypass common assert handling.
Open code a helper in the guest_printf test, as it's not expected that any
other test would want to skip _only_ the UCALL_ABORT handling.
Link: https://lore.kernel.org/r/20240719235107.3023592-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
We add a selftest to check that the new feature added in
commit 05ea491641 ("tcp: add support for SO_PEEK_OFF socket option")
works correctly.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://patch.msgid.link/20240828183752.660267-3-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dropping a local kptr, any kptr stashed into it is supposed to be
freed through bpf_obj_free_fields->__bpf_obj_drop_impl recursively. Add a
test to make sure it happens.
The test first stashes a referenced kptr to "struct task" into a local
kptr and gets the reference count of the task. Then, it drops the local
kptr and reads the reference count of the task again. Since
bpf_obj_free_fields and __bpf_obj_drop_impl will go through the local kptr
recursively during bpf_obj_drop, the dtor of the stashed task kptr should
eventually be called. The second reference count should be one less than
the first one.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240827011301.608620-1-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=yJIE
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
Charlie Jenkins <charlie@rivosinc.com> says:
There have been a couple of reports that using the hint address to
restrict the address returned by mmap hint address has caused issues in
applications. A different solution for restricting addresses returned by
mmap is necessary to avoid breakages.
[Palmer: This also just wasn't doing the right thing in the first place,
as it didn't handle the sv39 cases we were trying to deal with.]
* b4-shazam-merge:
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-0-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The mmap behavior that restricts the addresses returned by mmap caused
unexpected behavior, so get rid of the test cases that check that
behavior.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: 73d05262a2 ("selftests: riscv: Generalize mm selftests")
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-2-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.
Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.
While at it, fix the indentation around, which is wrong since the same
commit.
Fixes: 47867f0a7e ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.
This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Largely inspired from hid_bpf.c for the fixture setup.
Create a couple of tests for hidraw:
- create a uhid device and check if the fixture is working properly
- inject one uhid event and read it through hidraw
These tests are not that useful for now, but will be once we start adding
the ioctl and BPFs to revoke the hidraw node.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-3-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
When adding new tests programs, we need the same mechanics to create
new virtual devices, and read from their matching hidraw node.
Extract the common part into its own header so we can easily add new
tests C-files.
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-2-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Broonie reports that the set_id_regs test is failing as of commit
5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is
presented to the guest"). The test does not anticipate the 'late' ID
register fixup where KVM clobbers the GIC field in absence of GICv3.
While the field technically has FTR_LOWER_SAFE behavior, fix the issue
by setting it to an exact value of 0, matching the effect of the 'late'
fixup.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240829004622.3058639-1-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
This patch adds test cases for zero offset (implicit cast) or non-zero
offset pointer as KF_ACQUIRE kfuncs argument. Currently KF_ACQUIRE
kfuncs should support passing in pointers like &sk->sk_write_queue
(non-zero offset) or &sk->__sk_common (zero offset) and not be rejected
by the verifier.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848CB6F0D4D9068669A905B99952@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Smatch reported the following warning:
./tools/testing/selftests/bpf/testing_helpers.c:455 get_xlated_program()
warn: variable dereferenced before check 'buf' (see line 454)
It seems correct,so let's modify it based on it's suggestion.
Actually,commit b23ed4d74c ("selftests/bpf: Fix invalid pointer
check in get_xlated_program()") fixed an issue in the test_verifier.c
once,but it was reverted this time.
Let's solve this issue with the minimal changes possible.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/1eb3732f-605a-479d-ba64-cd14250cbf91@stanley.mountain/
Fixes: b4b7a4099b ("selftests/bpf: Factor out get_xlated_program() helper")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://lore.kernel.org/r/20240820023622.29190-1-hao.ge@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Thanks to the previous commit, the MPTCP subflows are now closed on both
directions even when only the MPTCP path-manager of one peer asks for
their closure.
In the two tests modified here -- "userspace pm add & remove address"
and "userspace pm create destroy subflow" -- one peer is controlled by
the userspace PM, and the other one by the in-kernel PM. When the
userspace PM sends a RM_ADDR notification, the in-kernel PM will
automatically react by closing all subflows using this address. Now,
thanks to the previous commit, the subflows are properly closed on both
directions, the userspace PM can then no longer closes the same
subflows if they are already closed. Before, it was OK to do that,
because the subflows were still half-opened, still OK to send a RM_ADDR.
In other words, thanks to the previous commit closing the subflows, an
error will be returned to the userspace if it tries to close a subflow
that has already been closed. So no need to run this command, which mean
that the linked counters will then not be incremented.
These tests are then no longer sending both a RM_ADDR, then closing the
linked subflow just after. The test with the userspace PM on the server
side is now removing one subflow linked to one address, then sending
a RM_ADDR for another address. The test with the userspace PM on the
client side is now only removing the subflow that was previously
created.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-2-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setup trace points, add a new ftrace instance in order to not interfere
with the rest of the system, filtering by net namespace cookies.
Raise a new background thread that parses trace_pipe, matches them with
the list of expected events.
Wiring up trace events to selftests provides another insight if there is
anything unexpected happining in the tcp-ao code (i.e. key rotation when
it's not expected).
Note: in real programs libtraceevent should be used instead of this
manual labor of setting ftrace up and parsing. I'm not using it here
as I don't want to have an .so library dependency that one would have to
bring into VM or DUT (Device Under Test). Please, don't copy it over
into any real world programs, that aren't tests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-8-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On tests that are expecting failure the timeout value is
TEST_RETRANSMIT_SEC == 1 second. Which is big enough for most of devices
under tests. But on a particularly slow machine/VM, 1 second might be
not enough for another thread to be scheduled and attempt to connect().
It is not a problem for tests that expect connect() to succeed as
the timeout value for them (TEST_TIMEOUT_SEC) is intentionally bigger.
One obvious way to solve this would be to increase TEST_RETRANSMIT_SEC.
But as all tests would increase the timeouts, that's going to sum up.
But here is less obvious way that keeps timeouts for expected connect()
failures low: just synchronize the two threads, which will assure that
before counter checks the other thread got a chance to run and timeout
on connect(). The expected increase of the related counter for listen()
socket will yet test the expected failure.
Never happens on my machine, but I suppose the majority of netdev's
connect-deny-* flakes [1] are caused by this.
Prevents the following testing issue:
> # selftests: net/tcp_ao: connect-deny_ipv6
> # 1..21
> # # 462[lib/setup.c:243] rand seed 1720905426
> # TAP version 13
> # ok 1 Non-AO server + AO client
> # not ok 2 Non-AO server + AO client: TCPAOKeyNotFound counter did not increase: 0 <= 0
> # ok 3 AO server + Non-AO client
> # ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1
...
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao/results/681741/6-connect-deny-ipv6/stdout
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-7-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not safe to use '%zu' specifier for printing uint64_t on 32-bit
systems. For uint64_t, we should use the 'PRIu64' macro from
the inttypes.h library. This ensures that the uint64_t is printed
correctly from the selftests regardless of the system architecture.
Signed-off-by: Mohammad Nassiri <mnassiri@ciena.com>
[Added missing spaces in fail/ok messages and uint64_t cast in
setsockopt-closed, as otherwise it was giving warnings on 64bit.
And carried it to netdev ml]
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-6-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch_save_ns() helper suppose to help switching to another
namespace for some action and to return back to original namespace.
The fd should be closed.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-5-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turns to be that open_netns() is called rarely from the child-thread
and more often from parent-thread. Yet, on initialization of kconfig
checks, either of threads may reach kconfig_lock mutex first.
VRF-related checks do create a temporary ksft-check VRF in
an unshare()'d namespace and than setns() back to the original.
As original was opened from "/proc/self/ns/net", it's valid for
thread-leader (parent), but it's invalid for the child, resulting
in the following failure on tests that check has_vrfs() support:
> # ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> # not ok 55 # error 381[unsigned-md5.c:24] Failed to add a VRF: -17
> # not ok 56 # error 383[unsigned-md5.c:33] Failed to add a route to VRF: -22: Key was rejected by service
> not ok 1 selftests: net/tcp_ao: unsigned-md5_ipv6 # exit=1
Use "/proc/thread-self/ns/net" which is valid for any thread.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-4-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the functions in tcp-ao lib/ return negative errno or -1 in case
of a failure. That creates inconsistencies in lib/kconfig, which saves
what was the error code. As well as the uninitialized kconfig value is
-1, which also may be the result of a check.
Define KCONFIG_UNKNOWN and save negative return code, rather than
libc-style errno.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-3-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of pre-allocating a fixed-sized buffer of TEST_MSG_BUFFER_SIZE
and printing into it, call vsnprintf() with str = NULL, which will
return the needed size of the buffer. This hack is documented in
man 3 vsnprintf.
Essentially, in C++ terms, it re-invents std::stringstream, which is
going to be used to print different tracing paths and formatted strings.
Use it straight away in __test_print() - which is thread-safe version of
printing in selftests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-2-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given how tortuous and fragile the whole lack-of-GICv3 story is,
add a selftest checking that we don't regress it.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on egress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on ingress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a method to quickly verify whether safe RET operates properly on
a given system using perf tool.
Also, add a selftest which does the same thing.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240731160531.28640-1-bp@kernel.org
Previously, the mapped ring-buffer layout caused misalignment between
the meta-page and sub-buffers when the sub-buffer size was not a
multiple of PAGE_SIZE. This prevented hardware with larger TLB entries
from utilizing them effectively.
Add a padding with the zero-page between the meta-page and sub-buffers.
Also update the ring-buffer map_test to verify that padding.
Link: https://lore.kernel.org/20240628104611.1443542-1-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adds a selftest that creates two virtual interfaces, assigns one to a
new namespace, and assigns IP addresses to both.
It listens on the destination interface using socat and configures a
dynamic target on netconsole, pointing to the destination IP address.
The test then checks if the message was received properly on the
destination interface.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240822095652.3806208-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZsiMrQAKCRDbK58LschI
g1mtAP9wBoNO9sNRrJ2OUg69R5uSTT2//v7icN01xwVtx9ir/AD+PJ+v/WG1QVlM
6GNsPoGtQ53ptuiJFfXEkuVELGqKywY=
=I/T4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-08-23
We've added 10 non-merge commits during the last 15 day(s) which contain
a total of 10 files changed, 222 insertions(+), 190 deletions(-).
The main changes are:
1) Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime,
from Alan Maguire.
2) Add a batch of BPF selftest improvements which fix a few bugs and add
missing features to improve the test coverage of sockmap/sockhash,
from Michal Luczaj.
3) Fix a false-positive Smatch-reported off-by-one in tcp_validate_cookie()
which is part of the test_tcp_custom_syncookie BPF selftest,
from Kuniyuki Iwashima.
4) Fix the flow_dissector BPF selftest which had a bug in IP header's
tot_len calculation doing subtraction after htons() instead of inside
htons(), from Asbjørn Sloth Tønnesen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftest: bpf: Remove mssind boundary check in test_tcp_custom_syncookie.c.
selftests/bpf: Introduce __attribute__((cleanup)) in create_pair()
selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected()
selftests/bpf: Honour the sotype of af_unix redir tests
selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible()
selftests/bpf: Socket pair creation, cleanups
selftests/bpf: Support more socket types in create_pair()
selftests/bpf: Avoid subtraction after htons() in ipip tests
selftests/bpf: add sockopt tests for TCP_BPF_SOCK_OPS_CB_FLAGS
bpf/bpf_get,set_sockopt: add option to set TCP-BPF sock ops flags
====================
Link: https://patch.msgid.link/20240823134959.1091-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmbHtrsACgkQ1V2XiooU
IOTZ8g/+OW8W468NmBHA2zrTWei19irA1iCBLvXMPakice0+ADU51eqVp6uUrCeP
iBUZGMtCq4WzFBrAEBePK3UNxxMHquWvAsA0kO/XW95KVM++s9ykF62q89jugMb3
CADEv/TxgJrkzpLWclxHNTCWMKpURijlkjT+kCMR4fKbeQnB6e/jI+2sdl7l5iRG
tHHm8ieewNNKE+jlSUJUrPEIM3tXRaZh9+JmbClfsF6wUw7qLmT/7P92aHBX4Owp
tpqi/Xc5/2k+Ud96a8u1NYrLLG+L70uz3SaeE7PvhaRavFuYftk2XLB4L2umtEfb
ZCZO/lCadH23XrVAUs5EtCDk4Tu3rZdTDsKYm2qS66uBsh/e6hg+j/cIPSO8jsNq
5Zbs/XzPFJ1PUpXVy8Sfs9vxH+cDuiqhy9nfKrbQotsqtoW+z52UoFH4WAjfmpqb
XMI+yeSTXYl1KIo2LV408VFRFRGcstBvXE7bOn7ufSrltRZcFdx7wqQBgVbh1zvA
1NTzIguZ+Lf2hPcNLPQd/f2vghKRTI7gUwzlDRw6so6NOWUM6/yV5KyoiZKekHjC
S6+M8cdiyMH8DmSsvAb46YKtDxYuIHqLVxuVqjfBHrMo1hLIo5smMCeCRA1Vabd5
/E4DTwpN5tVWX+HZl1wcAtQpXhcTktWM0qGSPnlRS11gwbAGWvk=
=O8tu
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
Patch #1 fix checksum calculation in nfnetlink_queue with SCTP,
segment GSO packet since skb_zerocopy() does not support
GSO_BY_FRAGS, from Antonio Ojea.
Patch #2 extend nfnetlink_queue coverage to handle SCTP packets,
from Antonio Ojea.
Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink,
from Donald Hunter.
Patch #4 adds a dedicate commit list for sets to speed up
intra-transaction lookups, from Florian Westphal.
Patch #5 skips removal of element from abort path for the pipapo
backend, ditching the shadow copy of this datastructure
is sufficient.
Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to
let users of conncoiunt decide when to enable conntrack,
this is needed by openvswitch, from Xin Long.
Patch #7 pass context to all nft_parse_register_load() in
preparation for the next patch.
Patches #8 and #9 reject loads from uninitialized registers from
control plane to remove register initialization from
datapath. From Florian Westphal.
* tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: don't initialize registers in nft_do_chain()
netfilter: nf_tables: allow loads only when register is initialized
netfilter: nf_tables: pass context structure to nft_parse_register_load
netfilter: move nf_ct_netns_get out of nf_conncount_init
netfilter: nf_tables: do not remove elements if set backend implements .abort
netfilter: nf_tables: store new sets in dedicated list
netfilter: nfnetlink: convert kfree_skb to consume_skb
selftests: netfilter: nft_queue.sh: sctp coverage
netfilter: nfnetlink_queue: unbreak SCTP traffic
====================
Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On some machines with a large number of CPUs there is a sizable delay
between an atomic replace occurring and when sysfs updates accordingly.
This fix uses 'loop_until' to wait for the atomic replace to unload all
previous livepatches.
Reported-by: CKI Project <cki-project@redhat.com>
Closes: https://datawarehouse.cki-project.org/kcidb/tests/redhat:1413102084-x86_64-kernel_upt_28
Signed-off-by: Ryan Sullivan <rysulliv@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://lore.kernel.org/r/20240822173122.14760-1-rysulliv@redhat.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
This results in passing 0 or just IOMMU_CACHE to iommu_map(). Most of
the page table formats don't like this:
amdv1 - -EINVAL
armv7s - returns 0, doesn't update mapped
arm-lpae - returns 0 doesn't update mapped
dart - returns 0, doesn't update mapped
VT-D - returns -EINVAL
Unfortunately the three formats that return 0 cause serious problems:
- Returning ret = but not uppdating mapped from domain->map_pages()
causes an infinite loop in __iommu_map()
- Not writing ioptes means that VFIO/iommufd have no way to recover them
and we will have memory leaks and worse during unmap
Since almost nothing can support this, and it is a useless thing to do,
block it early in iommufd.
Cc: stable@kernel.org
Fixes: aad37e71d5 ("iommufd: IOCTLs for the io_pagetable")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/1-v1-1211e1294c27+4b1-iommu_no_prot_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nothing special, just test how long insertion of x policies takes.
This should ideally show linear insertion speeds.
Do not run this by default, it has little value, but it can be useful to
check for insertion speed chahnges when altering the xfrm policy db
implementation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Save pkg-config output for libpcap as simply-expanded variables.
For an obscure reason 'shell' call in LDLIBS/CFLAGS recursively
expanded variables makes *.test.o files compilation non-parallel
when make is executed with -j option.
While at it, reuse 'pkg-config --cflags' call to define
-DTRAFFIC_MONITOR=1 option, it's exit status is the same as for
'pkg-config --exists'.
Fixes: f52403b6bf ("selftests/bpf: Add traffic monitor functions.")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823194409.774815-1-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Test stashing both referenced kptr and local kptr into local kptrs. Then,
test unstashing them.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-6-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of parsing text-based /proc/<pid>/maps file, try to use
PROCMAP_QUERY ioctl() to simplify and speed up data fetching.
This logic is used to do uprobe file offset calculation, so any bugs in
this logic would manifest as failing uprobe BPF selftests.
This also serves as a simple demonstration of one of the intended uses.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240806230319.869734-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract local label length as a #define directive and
elaborate why 'i % MAX_LOCAL_LABELS' expression is needed
for local labels array initialization.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Depending on kernel parameters, x86 jit generates either retq or jump
to rethunk for 'exit' instruction. The difference could be seen when
kernel is booted with and without mitigations=off parameter.
Relax the verifier_tailcall_jit test case to match both variants.
Fixes: e5bdd6a8be ("selftests/bpf: validate jit behaviour for tail calls")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
At the moment, when test_loader.c:get_current_arch() can't determine
the arch, it returns 0. The arch check in run_subtest() looks as
follows:
if ((get_current_arch() & spec->arch_mask) == 0) {
test__skip();
return;
}
Which means that all test_loader based tests would be skipped if arch
could not be determined. get_current_arch() recognizes x86_64, arm64
and riscv64. Which means that CI skips test_loader tests for s390.
Fix this by making sure that get_current_arch() always returns
non-zero value. In combination with default spec->arch_mask == -1 this
should cover all possibilities.
Fixes: f406026fef ("selftests/bpf: by default use arch mask allowing all archs")
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently a number of SVE/SME related tests have almost identical
functions to enumerate all supported vector lengths. However over time
the copy&pasted code has diverged, allowing some bugs to creep in:
- fake_sigreturn_sme_change_vl reports a failure, not a SKIP if only
one vector length is supported (but the SVE version is fine)
- fake_sigreturn_sme_change_vl tries to set the SVE vector length, not
the SME one (but the other SME tests are fine)
- za_no_regs keeps iterating forever if only one vector length is
supported (but za_regs is correct)
Since those bugs seem to be mostly copy&paste ones, let's consolidate
the enumeration loop into one shared function, and just call that from
each test. That should fix the above bugs, and prevent similar issues
from happening again.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240821164401.3598545-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check if veth pair was created and if yes, xfail on setting IP address
logging an informational message.
Use XFAIL instead of SKIP for unsupported ethtool APIs.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-4-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement on/off testing for all non-fixed features via while loop.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-3-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check if the netdev list is empty and create veth pair to be used for
feature on/off testing.
Remove the veth pair after testing is complete.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-2-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution
of tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=htcO
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
Add a selftest to confirm the issue, which gets -EINVAL when update
attached freplace prog to prog_array map, has been fixed.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
328/25 tailcalls/tailcall_freplace:OK
328 tailcalls:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KVM_CAP_HYPERV_DIRECT_TLBFLUSH is only reported when KVM runs on top of
Hyper-V and hyperv_evmcs/hyperv_svm_test don't need that, these tests check
that the feature is properly emulated for Hyper-V on KVM guests. There's no
corresponding CAP for that, the feature is reported in
KVM_GET_SUPPORTED_HV_CPUID.
Hyper-V specific CPUIDs are not reported by KVM_GET_SUPPORTED_CPUID,
implement dedicated kvm_hv_cpu_has() helper to do the job.
Fixes: 6dac119518 ("KVM: selftests: Make Hyper-V tests explicitly require KVM Hyper-V support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since there is 'hyperv.c' for Hyper-V specific functions already, move
Hyper-V specific functions out of processor.c there.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM exposes the OS double lock feature bit to Guests but returns
RAZ/WI on Guest OSDLR_EL1 access. This breaks Guest migration between
systems where this feature differ. Add support to make this feature
writable from userspace by setting the mask bit. While at it, set the
mask bits for the exposed WRPs(Number of Watchpoints) as well.
Also update the selftest to cover these fields.
However we still can't make BRPs and CTX_CMPs fields writable, because
as per ARM ARM DDI 0487K.a, section D2.8.3 Breakpoint types and
linking of breakpoints, highest numbered breakpoints(BRPs) must be
context aware breakpoints(CTX_CMPs). KVM does not trap + emulate the
breakpoint registers, and as such cannot support a layout that misaligns
with the underlying hardware.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240816132819.34316-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Use kfunc_bpf_cast_to_kern_ctx() and kfunc_bpf_rdonly_cast() to verify
that bpf_fastcall pattern is recognized for kfunc calls.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If test case does not specify architecture via __arch_* macro consider
that it should be run for all architectures.
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and selftests parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.
To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A few tests check if nettest exists in the $PATH before adding
$PWD to $PATH and re-checking. They don't discard stderr on
the first check (and nettest is built as part of selftests,
so it's pretty normal for it to not be available in system $PATH).
This leads to output noise:
which: no nettest in (/home/virtme/tools/fs/bin:/home/virtme/tools/fs/sbin:/home/virtme/tools/fs/usr/bin:/home/virtme/tools/fs/usr/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
Add a common helper for the check which does silence stderr.
There is another small functional change hiding here, because pmtu.sh
and fib_rule_tests.sh used to return from the test case rather than
completely exit. Building nettest is not hard, there should be no need
to maintain the ability to selectively skip cases in its absence.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240821012227.1398769-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
At some point there'd been a dumb braino during the dup_fd()
calling conventions change; caught by smatch and immediately fixed.
The trouble is, there had been no test coverage for the dup_fd() failure
handling - neither in kselftests nor in LTP. Fortunately, it can be
triggered on stock kernel - ENOMEM would require fault injection, but
EMFILE can be had with sysctl alone (fs.nr_open).
Add a test for dup_fd() failure.
Fixed up commit log and short log - Shuah Khan
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Smatch reported a possible off-by-one in tcp_validate_cookie().
However, it's false positive because the possible range of mssind is
limited from 0 to 3 by the preceding calculation.
mssind = (cookie & (3 << 6)) >> 6;
Now, the verifier does not complain without the boundary check.
Let's remove the checks.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/6ae12487-d3f1-488b-9514-af0dac96608f@stanley.mountain/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240821013425.49316-1-kuniyu@amazon.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Source the ethtool library from the correct path and avoid the following
error:
./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory
Fixes: 40d269c000 ("selftests: forwarding: Move several selftests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both __xlated and __jited work with disassembly.
It is logical to have both work in a similar manner.
This commit updates __xlated macro handling in test_loader.c by making
it expect matches on sequential lines, same way as __jited operates.
For example:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("3: r0 = &(void __percpu *)(r0)") ;; matched on line N+1
Also:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("...") ;; not matched
__xlated("3: r0 = &(void __percpu *)(r0)") ;; mantched on any
;; line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A program calling sub-program which does a tail call.
The idea is to verify instructions generated by jit for tail calls:
- in program and sub-program prologues;
- for subprogram call instruction;
- for tail call itself.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow to verify jit behaviour by writing tests as below:
SEC("tp")
__arch_x86_64
__jited(" endbr64")
__jited(" nopl (%rax,%rax)")
__jited(" xorq %rax, %rax")
...
__naked void some_test(void)
{
asm volatile (... ::: __clobber_all);
}
Allow regular expressions in patterns, same way as in __msg.
By default assume that each __jited pattern has to be matched on the
next consecutive line of the disassembly, e.g.:
__jited(" endbr64") # matched on line N
__jited(" nopl (%rax,%rax)") # matched on line N+1
If match occurs on a wrong line an error is reported.
To override this behaviour use __jited("..."), e.g.:
__jited(" endbr64") # matched on line N
__jited("...") # not matched
__jited(" nopl (%rax,%rax)") # matched on any line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a utility function to get disassembled text for jited
representation of a BPF program designated by file descriptor.
Function prototype looks as follows:
int get_jited_program_text(int fd, char *text, size_t text_sz)
Where 'fd' is a file descriptor for the program, 'text' and 'text_sz'
refer to a destination buffer for disassembled text.
Output format looks as follows:
18: 77 06 ja L0
1a: 50 pushq %rax
1b: 48 89 e0 movq %rsp, %rax
1e: eb 01 jmp L1
20: 50 L0: pushq %rax
21: 50 L1: pushq %rax
^ ^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^
| binary insn | textual insn
| representation | representation
| |
instruction offset inferred local label name
The code and makefile changes are inspired by jit_disasm.c from bpftool.
Use llvm libraries to disassemble BPF program instead of libbfd to avoid
issues with disassembly output stability pointed out in [1].
Selftests makefile uses Makefile.feature to detect if LLVM libraries
are available. If that is not the case selftests build proceeds but
the function returns -EOPNOTSUPP at runtime.
[1] commit eb9d1acf63 ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Upcoming changes require a notation to specify regular expression
matches for regular verifier log messages, disassembly of BPF
instructions, disassembly of jited instructions.
Neither basic nor extended POSIX regular expressions w/o additional
escaping are good for this role because of wide use of special
characters in disassembly, for example:
movq -0x10(%rbp), %rax ;; () are special characters
cmpq $0x21, %rax ;; $ is a special character
*(u64 *)(r10 -16) = r1 ;; * and () are special characters
This commit borrows syntax from LLVM's FileCheck utility.
It replaces __regex macro with ability to embed regular expressions
in __msg patters using "{{" "}}" pairs for escaping.
Syntax for __msg patterns:
pattern := (<verbatim text> | regex)*
regex := "{{" <posix extended regular expression> "}}"
For example, pattern "foo{{[0-9]+}}" matches strings like
"foo0", "foo007", etc.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.
Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:
/* seq A */ /* seq B */
__tag("foo") __tag("foo")
__tag("bar") __tag("bar")
__tag("foo")
Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:
#define __msg(msg) \
__attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))
Using this definition the "seq A" from example above is translated to
BTF as follows:
[..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1
Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.
Fixes: 537c3f66ea ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.
Fixes: 4ef5d6af49 ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_loader based tests in the verbose mode each matched
message leaves a trace in the stderr, e.g.:
./test_progs -vvv -t ...
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
This is not very helpful when debugging such tests and clobbers the
log a lot.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define BPF iterator "getter" kfunc, which accepts iterator pointer as
one of the arguments. Make sure that argument passed doesn't have to be
the very first argument (unlike new-next-destroy combo).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The function "scheduler_tick" was renamed to "sched_tick" and a selftest
that used that function for testing function trace filtering used that
function as part of the test.
But the change causes it to fail when run on older kernels. As tests
should not fail on older kernels, add a check to see which name is
available before testing.
Fixes: 86dd6c04ef ("sched/balancing: Rename scheduler_tick() => sched_tick()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make timespec pointers, pointers to const in checklist function. As a
consequence, make list parameter in checklist function pointer to const
as well. Const-correctness increases readability.
Improvement was found by running cppcheck tool on the patched file as
follows:
```
cppcheck --enable=all \
tools/testing/selftests/timers/threadtest.c \
--suppress=missingIncludeSystem \
--suppress=unusedFunction
```
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This case was not covered, and the wrong ID was set before the previous
commit.
The rest is not modified, it is just that it will increase the code
coverage.
The right address ID can be verified by looking at the packet traces. We
could automate that using Netfilter with some cBPF code for example, but
that's always a bit cryptic. Packetdrill seems better fitted for that.
Fixes: 4f49d63352 ("selftests: mptcp: add fullmesh testcases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After having flushed endpoints that didn't cause the creation of new
subflows, it is important to check endpoints can be re-created, re-using
previously used IDs.
Before the previous commit, the client would not have been able to
re-create the subflow that was previously rejected.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-6-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test extends "delete and re-add" to validate the previous commit. A
new 'subflow' endpoint is added, but the subflow request will be
rejected. The result is that no subflow will be established from this
address.
Later, the endpoint is removed and re-added after having cleared the
firewall rule. Before the previous commit, the client would not have
been able to create this new subflow.
While at it, extra checks have been added to validate the expected
numbers of MPJ and RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-4-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test extends "delete re-add signal" to validate the previous
commit. An extra address is announced by the server, but this address
cannot be used by the client. The result is that no subflow will be
established to this address.
Later, the server will delete this extra endpoint, and set a new one,
with a valid address, but re-using the same ID. Before the previous
commit, the server would not have been able to announce this new
address.
While at it, extra checks have been added to validate the expected
numbers of MPJ, ADD_ADDR and RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-2-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looking at timestamped output of netdev CI reveals that
most of the time in forwarding tests for custom route
hashing is spent on a single case, namely the test which
uses ping (mausezahn does not support flow labels).
On a non-debug kernel we spend 714 of 730 total test
runtime (97%) on this test case. While having flow label
support in a traffic gen tool / mausezahn would be best,
we can significantly speed up the loop by putting ip vrf exec
outside of the iteration.
In a test of 1000 pings using a normal loop takes 50 seconds
to finish. While using:
ip vrf exec $vrf sh -c "$loop-body"
takes 12 seconds (1/4 of the time).
Some of the slowness is likely due to our inefficient virtualization
setup, but even on my laptop running "ip link help" 16k times takes
25-30 seconds, so I think it's worth optimizing even for fastest
setups.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240817203659.712085-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrity Policy Enforcement (IPE) is an LSM that provides an
complimentary approach to Mandatory Access Control than existing LSMs
today.
Existing LSMs have centered around the concept of access to a resource
should be controlled by the current user's credentials. IPE's approach,
is that access to a resource should be controlled by the system's trust
of a current resource.
The basis of this approach is defining a global policy to specify which
resource can be trusted.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rewrite function to have (unneeded) socket descriptors automatically
close()d when leaving the scope. Make sure the "ownership" of fds is
correctly passed via take_fd(); i.e. descriptor returned to caller will
remain valid.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-6-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Constants got switched reducing the test's coverage. Replace SOCK_DGRAM
with SOCK_STREAM in one of unix_inet_skb_redir_to_connected() tests.
Fixes: 51354f700d ("bpf, sockmap: Add af_unix test with both sockets in map")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-5-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Do actually test the sotype as specified by the caller.
This picks up after commit 75e0e27db6 ("selftest/bpf: Change udp to inet
in some function names").
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-4-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Replace implementation with a call to a generic function.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-3-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Following create_pair() changes, remove unused function argument in
create_socket_pairs() and adapt its callers, i.e. drop the open-coded
loopback socket creation.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-2-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the function to allow creating socket pairs of SOCK_STREAM,
SOCK_DGRAM and SOCK_SEQPACKET.
Adapt direct callers and leave further cleanups for the following patch.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-1-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
GCC errors when compiling tailcall_bpf2bpf_hierarchy2.c and
tailcall_bpf2bpf_hierarchy3.c with the following error:
progs/tailcall_bpf2bpf_hierarchy2.c: In function 'tailcall_bpf2bpf_hierarchy_2':
progs/tailcall_bpf2bpf_hierarchy2.c:66:9: error: input operand constraint contains '+'
66 | asm volatile (""::"r+"(ret));
| ^~~
Changed implementation to make use of __sink macro that abstracts the
desired behaviour.
The proposed change seems valid for both GCC and CLANG.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-4-cupertino.miranda@oracle.com
verfifier_nocsr.c fails to compile in GCC. The reason behind it was
initially explained in commit 27a90b14b9.
"A few BPF selftests perform type punning and they may break strict
aliasing rules, which are exploited by both GCC and clang by default
while optimizing. This can lead to broken compiled programs."
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-2-cupertino.miranda@oracle.com
Test that nfqueue with and without GSO process SCTP packets correctly.
Joint work with Florian and Pablo.
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
After commit d7db7775ea ("net: veth: do not manipulate GRO when using
XDP"), there is no need to load XDP program to enable GRO. On the other
hand, the current test is failed due to loading the XDP program. e.g.
# selftests: net: udpgro.sh
# ipv4
# no GRO ok
# no GRO chk cmsg ok
# GRO ./udpgso_bench_rx: recv: bad packet len, got 1472, expected 14720
#
# failed
[...]
# bad GRO lookup ok
# multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# failed
ok 1 selftests: net: udpgro.sh
After fix, all the test passed.
# ./udpgro.sh
ipv4
no GRO ok
[...]
multiple GRO socks ok
Fixes: d7db7775ea ("net: veth: do not manipulate GRO when using XDP")
Reported-by: Yi Chen <yiche@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-53858
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we only check the latest senders's exit code. If the receiver
report failed, it is not recoreded. Fix it by checking the exit code
of all the involved processes.
Before:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
0
After:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
1
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add functions to simply print some basic state information in selftests.
The output can be enabled by setting:
#define TH_LOG_ENABLED 1
#define DEBUG 1
* print_psw: current SIE state description and VM run state
* print_hex_bytes: print memory with some counting markers
* print_hex: PRINT_HEX with 512 bytes
* print_run: use print_psw and print_hex to print contents of VM run
state and SIE state description
* print_regs: print content of general and control registers
All prints use pr_debug for the output and can be configured using
DEBUG.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-6-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-6-schlameuss@linux.ibm.com>
Add a uc_kvm fixture to create and destroy a ucontrol VM.
* uc_sie_assertions asserts basic settings in the SIE as setup by the
kernel.
* uc_attr_mem_limit asserts the memory limit is max value and cannot be
set (not supported).
* uc_no_dirty_log asserts dirty log is not supported.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-5-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-5-schlameuss@linux.ibm.com>
Add test suite to validate the s390x architecture specific ucontrol KVM
interface.
Make use of the selftest test harness.
* uc_cap_hpage testcase verifies that a ucontrol VM cannot be run with
hugepages.
To allow testing of the ucontrol interface the kernel needs a
non-default config containing CONFIG_KVM_S390_UCONTROL.
This config needs to be set to built-in (y) as this cannot be built as
module.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-4-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-4-schlameuss@linux.ibm.com>
Subsequent tests do require direct manipulation of the SIE control
block. This commit introduces the SIE control block definition for use
within the selftests.
There are already definitions of this within the kernel.
This differs in two ways.
* This is the first definition of this in userspace.
* In the context of the selftests this does not require atomicity for
the flags.
With the userspace definition of the SIE block layout now being present
we can reuse the values in other tests where applicable.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-3-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-3-schlameuss@linux.ibm.com>
Multiple test cases need page size and shift definitions.
By moving the definitions to a single architecture specific header we
limit the repetition.
Make use of PAGE_SIZE, PAGE_SHIFT and PAGE_MASK defines in existing
code.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-2-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-2-schlameuss@linux.ibm.com>
