The existing vma_merge() function is no longer required to handle what
were previously referred to as cases 1-3 (i.e. the merging of a new VMA),
as this is now handled by vma_merge_new_vma().
Additionally, simplify the convoluted control flow of the original,
maintaining identical logic only expressed more clearly and doing away
with a complicated set of cases, rather logically examining each possible
outcome - merging of both the previous and subsequent VMA, merging of the
previous VMA and merging of the subsequent VMA alone.
We now utilise the previously implemented commit_merge() function to share
logic with vma_expand() de-duplicating code and providing less surface
area for bugs and confusion. In order to do so, we adjust this function
to accept parameters specific to merging existing ranges.
Link: https://lkml.kernel.org/r/2cf6016b7bfcc4965fc3cde10827560c42e4f12c.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Abstract vma_merge_new_vma() to use vma_merge_struct and rename the
resultant function vma_merge_new_range() to be clear what the purpose of
this function is - a new VMA is desired in the specified range, and we
wish to see if it is possible to 'merge' surrounding VMAs into this range
rather than having to allocate a new VMA.
Note that this function uses vma_extend() exclusively, so adopts its
requirement that the iterator point at or before the gap. We add an
assert to this effect.
This is as opposed to vma_merge_existing_range(), which will be introduced
in a subsequent commit, and provide the same functionality for cases in
which we are modifying an existing VMA.
In mmap_region() and do_brk_flags() we open code scenarios where we prefer
to use vma_expand() rather than invoke a full vma_merge() operation.
Abstract this logic and eliminate all of the open-coding, and also use the
same logic for all cases where we add new VMAs to, rather than ultimately
use vma_merge(), rather use vma_expand().
Doing so removes duplication and simplifies VMA merging in all such cases,
laying the ground for us to eliminate the merging of new VMAs in
vma_merge() altogether.
Also add the ability for the vmg to track state, and able to report
errors, allowing for us to differentiate a failed merge from an inability
to allocate memory in callers.
This makes it far easier to understand what is happening in these cases
avoiding confusion, bugs and allowing for future optimisation.
Also introduce vma_iter_next_rewind() to allow for retrieval of the next,
and (optionally) the prev VMA, rewinding to the start of the previous gap.
Introduce are_anon_vmas_compatible() to abstract individual VMA anon_vma
comparison for the case of merging on both sides where the anon_vma of the
VMA being merged maybe compatible with prev and next, but prev and next's
anon_vma's may not be compatible with each other.
Finally also introduce can_vma_merge_left() / can_vma_merge_right() to
check adjacent VMA compatibility and that they are indeed adjacent.
Link: https://lkml.kernel.org/r/49d37c0769b6b9dc03b27fe4d059173832556392.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The purpose of the vmg is to thread merge state through functions and
avoid egregious parameter lists. We expand this to vma_expand(), which is
used for a number of merge cases.
Accordingly, adjust its callers, mmap_region() and relocate_vma_down(), to
use a vmg.
An added purpose of this change is the ability in a future commit to
perform all new VMA range merging using vma_expand().
Link: https://lkml.kernel.org/r/4bc8c9dbc9ca52452ef8e587b28fe555854ceb38.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than passing around huge numbers of parameters to numerous helper
functions, abstract them into a single struct that we thread through the
operation, the vma_merge_struct ('vmg').
Adjust vma_merge() and vma_modify() to accept this parameter, as well as
predicate functions can_vma_merge_before(), can_vma_merge_after(), and the
vma_modify_...() helper functions.
Also introduce VMG_STATE() and VMG_VMA_STATE() helper macros to allow for
easy vmg declaration.
We additionally remove the requirement that vma_merge() is passed a VMA
object representing the candidate new VMA. Previously it used this to
obtain the mm_struct, file and anon_vma properties of the proposed range
(a rather confusing state of affairs), which are now provided by the vmg
directly.
We also remove the pgoff calculation previously performed vma_modify(),
and instead calculate this in VMG_VMA_STATE() via the vma_pgoff_offset()
helper.
Link: https://lkml.kernel.org/r/a955aad09d81329f6fbeb636b2dd10cde7b73dab.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a variety of VMA merge unit tests to assert that the behaviour of VMA
merge is correct at an abstract level and VMAs are merged or not merged as
expected.
These are intentionally added _before_ we start refactoring vma_merge() in
order that we can continually assert correctness throughout the rest of
the series.
In order to reduce churn going forward, we backport the vma_merge_struct
data type to the test code which we introduce and use in a future commit,
and add wrappers around the merge new and existing VMA cases.
Link: https://lkml.kernel.org/r/1c7a0b43cfad2c511a6b1b52f3507696478ff51a.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: remove vma_merge()", v3.
The infamous vma_merge() function has been the cause of a great deal of
pain, bugs and confusion for a very long time.
It is subtle, contains many corner cases, tries to do far too much and is
as a result very fragile.
The fact that the function requires there to be a numbering system to
cover each possible eventuality with references to each in the many
branches of its implementation as to which case you are looking at speaks
to all this.
Some of this complexity is inherent - unfortunately there is no getting
away from the need to figure out precisely how to execute the merge,
whether we need to remove VMAs, whether it is safe to do so, what
constitutes a mergeable VMA and so on.
However, a lot of the complexity is not inherent but instead a product of
the function's 'organic' development.
Liam has gone to great lengths to improve the situation as a part of his
maple tree implementation, greatly improving the readability of the code,
and Vlastimil and myself have additionally gone to lengths to try to
improve things further.
However, with the availability of userland VMA testing, it now becomes
possible to perform a rather more significant refactoring while
maintaining confidence in its correct operation.
An attempt was previously made by Vlastimil [0] to eliminate vma_merge(),
however it was rather - brutal - and an astute reader might refer to the
date of that patch for insight as to its intent.
This series instead divides merge operations into two natural kinds -
merges which occur when a NEW vma is being added to the address space, and
merges which occur when a vma is being MODIFIED.
Happily, the vma_expand() function introduced by Liam, which has the
capacity for also deleting a subsequent VMA, covers each of the NEW vma
cases.
By abstracting the actual final commit of changes to a VMA to its own
function, commit_merge() and writing a wrapper around vma_expand() for new
VMA cases vma_merge_new_range(), we can avoid having to use vma_merge()
for these instances altogether.
By doing so we are also able to then de-duplicate all existing merge logic
in mmap_region() and do_brk_flags() and have everything invoke this new
function, so we universally take the same approach to merging new VMAs.
Having done so, we can then completely rework vma_merge() into
vma_merge_existing_range() and use this for the instances where a merge is
proposed for a region of an existing VMA.
This eliminates vma_merge() and its numbered cases and instead divides
things into logical cases - merge both, merge left, merge right (the
latter 2 being either partial or full merges).
The code is heavily annotated with ASCII diagrams and greatly simplified
in comparison to the existing vma_merge() function.
Having made this change, we take the opportunity to address an issue with
merging VMAs possessing a vm_ops->close() hook - commit 714965ca82
("mm/mmap: start distinguishing if vma can be removed in mergeability
test") and commit fc0c8f9089 ("mm, mmap: fix vma_merge() case 7 with
vma_ops->close") make efforts to relax how we handle these, making
assumptions about which VMAs might end up deleted (and thus, if possessing
a vm_ops->close() hook, cannot be).
This refactor means we do not need to guess, so instead explicitly only
disallow merge in instances where a VMA with a vm_ops->close() hook would
be deleted (and try a smaller merge in cases where this is possible).
In addition to these changes, we introduce a new vma_merge_struct
abstraction to allow VMA merge state to be threaded through the operation
neatly.
There is heavy unit testing provided for all merge functionality, added
prior to the refactoring, allowing for before/after testing.
The vm_ops->close() change also introduces exhaustive testing to
demonstrate that this functions as expected, and in addition to this the
reproduction code from commit fc0c8f9089 ("mm, mmap: fix vma_merge()
case 7 with vma_ops->close") was tested and confirmed passing.
[0]:https://lore.kernel.org/linux-mm/20240401192623.18575-2-vbabka@suse.cz/
This patch (of 10):
Have vma.o depend on its source dependencies explicitly, as previously
these were simply being ignored as existing object files were up to date.
This now correctly re-triggers the build if mm/ source is changed as well
as local source code.
Also set clean as a phony rule.
Link: https://lkml.kernel.org/r/cover.1725040657.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/e3ea58f08364ae5432c9a074de0195a7c7e0b04a.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ensure that zswap.writeback check goes up the cgroup tree, i.e. is
hierarchical. Create a subcgroup which has zswap.writeback set to 1, and
the upper hierarchy's restrictions shall apply.
Link: https://lkml.kernel.org/r/20240823162506.12117-2-me@yhndnzj.com
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, running the charge_reserved_hugetlb.sh selftest we can
sometimes observe something like:
$ ./charge_reserved_hugetlb.sh -cgroup-v2
...
write_result is 0
After write:
hugetlb_usage=0
reserved_usage=10485760
killing write_to_hugetlbfs
Received 2.
Deleting the memory
Detach failure: Invalid argument
umount: /mnt/huge: target is busy.
Both cases are issues in the test.
While the unmount error seems to be racy, it will make the test fail:
$ ./run_vmtests.sh -t hugetlb
...
# [FAIL]
not ok 10 charge_reserved_hugetlb.sh -cgroup-v2 # exit=32
The issue is that we are not waiting for the write_to_hugetlbfs process to
quit. So it might still have a hugetlbfs file open, about which umount is
not happy. Fix that by making "killall" wait for the process to quit.
The other error ("Detach failure: Invalid argument") does not seem to
result in a test error, but is misleading. Turns out write_to_hugetlbfs.c
unconditionally tries to cleanup using shmdt(), even when we only
mmap()'ed a hugetlb file. Even worse, shmaddr is never even set for the
SHM case. Fix that as well.
With this change it seems to work as expected.
Link: https://lkml.kernel.org/r/20240821123115.2068812-1-david@redhat.com
Fixes: 29750f71a9 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add more mseal traversal tests across VMAs, where we could possibly screw
up sealing checks. These test more across-vma traversal for mprotect,
munmap and madvise. Particularly, we test for the case where a regular
VMA is followed by a sealed VMA.
[akpm@linux-foundation.org: remove incorrect comment, per review]
[akpm@linux-foundation.org: remove the correct comment, per Pedro]
[pedro.falcato@gmail.com: fix mseal's length]
Link: https://lkml.kernel.org/r/vc4czyuemmu3kylqb4ctaga6y5yvondlyabimx6jvljlw2fkea@djawlllf45xa
Link: https://lkml.kernel.org/r/20240817-mseal-depessimize-v3-7-d8d2e037df30@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add shmem mTHP collpase testing. Similar to the anonymous page, users can
use the '-s' parameter to specify the shmem mTHP size for testing.
Link: https://lkml.kernel.org/r/fa44bfa20ca5b9fd6f9163a048f3d3c1e53cd0a8.1724140601.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
IA64 has gone with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"), so remove unnecessary ia64 special mm code and comment in
selftests too.
Link: https://lkml.kernel.org/r/20240819130609.3386195-1-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The name of cxl_setup_parent_dport() function is not clear, the function
is used to initialize AER and RAS capabilities on a dport, therefore,
rename the function to cxl_dport_init_ras_reporting(), it is easier for
user to understand what the function does. Besides, adjust the order of
the function parameters, the subject of cxl_dport_init_ras_reporting()
is a cxl dport, so a struct cxl_dport as the first parameter of the
function should be better.
cxl_dport_map_regs() is used to map CXL RAS capability on a cxl dport,
using cxl_dport_map_ras() as the function name.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-1-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
'MPTCP_PM_NAME' is defined in 'linux/mptcp_pm.h', included in
'linux/mptcp.h', no need to re-define it.
'MPTCP_PM_EVENTS' is not defined in 'linux/mptcp.h', but
'MPTCP_PM_EV_GRP_NAME' is, with the same value. We can then use the
latter, and drop the other one.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-11-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The four checksum tests are similar, only one line is different. So
a for-loop can be used to simplify these tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-10-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test is supposed to be killed before the end, which will likely
cause "Connection reset by peer" errors. It is confusing, especially
because in case of real transfer errors, the test will not be marked as
failed. But that's OK, there are many other tests checking that.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-9-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of displaying 'invert' when looking at some events like MP_FAIL,
MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are
not traditionnaly sent from one side, the host being checked is now
printed.
For the ADD_ADDR, only display the host when it is the client sending
it, which is more unusual.
Also before, the 'invert' message was printed after a few checks, but it
was not clear which ones exactly.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, the check names had to be very short. It is no longer the case
now that these checks are printed on a dedicated line.
Then, it looks better to have more explicit names.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-7-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few new MPJoinSynTx MIB counters have been added in a previous commit.
They are being validated here in mptcp_join.sh selftest, each time the
number of received MPJ are checked.
Most of the time, the number of sent SYN+MPJ is the same as the received
ones. But sometimes, there are more, because there are dropped, or there
are errors.
While at it, the "no MPC reuse with single endpoint" subtest has been
modified to force a bind() error.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-6-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most tests are checking if the expected number of SYN/SYN+ACK/ACK JOINs
have been received, each of them on one line.
More Join related tests are going to be checked soon, no need to add 5
new lines per test in case of success, just one is enough. In case of
issue, the errors will still be reported like before.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-5-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chk_join_nr() currently takes 9 positional parameters, 6 of them are
optional. It makes it hard to read:
chk_join_nr 1 1 1 1 0 1 1 0 4
Naming these vars helps to make it easier to read:
join_csum_ns1=1 join_csum_ns2=0 \
join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \
join_corrupted_pkts=4 \
chk_join_nr 1 1 1
It will then be easier to add new optional parameters.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-4-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use dev_is_platform() instead of checking bus type directly.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240827095123.168696-1-kunwu.chan@linux.dev
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add return value checks for read & write calls in test_listmount_ns
function. This patch resolves below compilation warnings:
```
statmount_test_ns.c: In function ‘test_listmount_ns’:
statmount_test_ns.c:322:17: warning: ignoring return value of ‘write’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
statmount_test_ns.c:323:17: warning: ignoring return value of ‘read’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
```
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The sctp selftest is very slow on debug kernels.
Its possible that the nf_queue listener program exits due to timeout
before first sctp packet is processed.
In this case socat hangs until script times out.
Fix this by removing the -t option where possible and kill the test
program once the file transfer/socat has exited.
-t sets SO_RCVTIMEO, its inteded for the 'ping' part of the selftest
where we want to make sure that packets get reinjected properly without
skipping a second queue request.
While at it, add a helper to compare the (binary) files instead of diff.
The 'diff' part was copied from a another sub-test that compares text.
Let helper dump file sizes on error so we can see the progress made.
Tested on an old 2010-ish box with a debug kernel and 100 iterations.
This is a followup to the earlier filesize reduction change.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240829080109.GB30766@breakpoint.cc/
Fixes: 0a8b08c554 ("selftests: netfilter: nft_queue.sh: reduce test file size for debug build")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240830092254.8029-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change the file permissions of tools/testing/fault-injection/failcmd.sh to
allow execution. This ensures the script can be run directly without
explicitly invoking a shell.
Link: https://lkml.kernel.org/r/20240729085215.3403417-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The failcmd.sh script in the fault-injection toolkit does not currently
validate whether the provided address is in hexadecimal format. This can
lead to silent failures if the address is sourced from places like
`/proc/kallsyms`, which omits the '0x' prefix, potentially causing users
to operate under incorrect assumptions.
Introduce a new function, `exit_if_not_hex`, which checks the format of
the provided address and exits with an error message if the address is not
a valid hexadecimal number.
This enhancement prevents users from running the command with improperly
formatted addresses, thus improving the robustness and usability of the
failcmd tool.
Link: https://lkml.kernel.org/r/20240729084512.3349928-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Separate call to mas_destroy() from mas_nomem() so we can check for no
memory errors without destroying the current maple state in
mas_store_gfp(). We then add calls to mas_destroy() to callers of
mas_nomem().
Link: https://lkml.kernel.org/r/20240814161944.55347-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce mas_wr_store_type() which will set the correct store type based
on a walk of the tree. In mas_wr_node_store() the <= min_slots condition
is changed to < as if new_end is = to mt_min_slots then there is not
enough room.
mas_prealloc_calc() is also introduced to abstract the calculation used to
determine the number of nodes needed for a store operation.
In this change a call to mas_reset() is removed in the error case of
mas_prealloc(). This is only needed in the MA_STATE_REBALANCE case of
mas_destroy(). We can move the call to mas_reset() directly to
mas_destroy().
Also, add a test case to validate the order that we check the store type
in is correct. This test models a vma expanding and then shrinking which
is part of the boot process.
Link: https://lkml.kernel.org/r/20240814161944.55347-5-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add new callback fields to the userspace implementation of struct
kmem_cache. This allows for executing callback functions in order to
further test low memory scenarios where node allocation is retried.
This callback can help test race conditions by calling a function when a
low memory event is tested.
Link: https://lkml.kernel.org/r/20240812190543.71967-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make accept_memory() and range_contains_unaccepted_memory() take 'start'
and 'size' arguments instead of 'start' and 'end'.
Remove accept_page(), replacing it with direct calls to accept_memory().
The accept_page() name is going to be used for a different function.
Link: https://lkml.kernel.org/r/20240809114854.3745464-6-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
the syscall remap accepts following:
mremap(src, size, size, MREMAP_MAYMOVE | MREMAP_DONTUNMAP, dst)
when the src is sealed, the call will fail with error code:
EPERM
Previously, the test uses hard-coded 0xdeaddead as dst, and it
will fail on the system with newer glibc installed.
This patch removes test's dependency on glibc for mremap(), also
fix the test and remove the hardcoded address.
Link: https://lkml.kernel.org/r/20240807212320.2831848-1-jeffxu@chromium.org
Fixes: 4926c7a52d ("selftest mm/mseal memory sealing")
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add an mseal test for madvise() operations that aren't considered
"discard" (e.g purely advisory ops such as MADV_RANDOM).
[pedro.falcato@gmail.com: adjust the mseal test's plan]
Link: https://lkml.kernel.org/r/20240807203724.2686144-1-pedro.falcato@gmail.com
Link: https://lkml.kernel.org/r/20240807173336.2523757-3-pedro.falcato@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Establish a new userland VMA unit testing implementation under
tools/testing which utilises existing logic providing maple tree support
in userland utilising the now-shared code previously exclusive to radix
tree testing.
This provides fundamental VMA operations whose API is defined in mm/vma.h,
while stubbing out superfluous functionality.
This exists as a proof-of-concept, with the test implementation functional
and sufficient to allow userland compilation of vma.c, but containing only
cursory tests to demonstrate basic functionality.
Link: https://lkml.kernel.org/r/533ffa2eec771cbe6b387dd049a7f128a53eb616.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: SeongJae Park <sj@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The core components contained within the radix-tree tests which provide
shims for kernel headers and access to the maple tree are useful for
testing other things, so separate them out and make the radix tree tests
dependent on the shared components.
This lays the groundwork for us to add VMA tests of the newly introduced
vma.c file.
Link: https://lkml.kernel.org/r/1ee720c265808168e0d75608e687607d77c36719.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend two existing tests to cover extracting memory usage through the
newly mutable memory.peak and memory.swap.peak handlers.
In particular, make sure to exercise adding and removing watchers with
overlapping lifetimes so the less-trivial logic gets tested.
The new/updated tests attempt to detect a lack of the write handler by
fstat'ing the memory.peak and memory.swap.peak files and skip the tests if
that's the case. Additionally, skip if the file doesn't exist at all.
[davidf@vimeo.com: update tests]
Link: https://lkml.kernel.org/r/20240730231304.761942-3-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-3-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The __NR_mmap isn't found on armhf. The mmap() is commonly available
system call and its wrapper is present on all architectures. So it should
be used directly. It solves problem for armhf and doesn't create problem
for other architectures.
Remove sys_mmap() functions as they aren't doing anything else other than
calling mmap(). There is no need to set errno = 0 manually as glibc
always resets it.
For reference errors are as following:
CC seal_elf
seal_elf.c: In function 'sys_mmap':
seal_elf.c:39:33: error: '__NR_mmap' undeclared (first use in this function)
39 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
mseal_test.c: In function 'sys_mmap':
mseal_test.c:90:33: error: '__NR_mmap' undeclared (first use in this function)
90 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
Link: https://lkml.kernel.org/r/20240809082511.497266-1-usama.anjum@collabora.com
Fixes: 4926c7a52d ("selftest mm/mseal memory sealing")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is only hotplug test for cpuset v1, just add base read/write test
for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since isolated CPUs can be reserved at boot time via the "isolcpus"
boot command line option, these pre-isolated CPUs may interfere with
testing done by test_cpuset_prs.sh.
With the previous commit that incorporates those boot time isolated CPUs
into "cpuset.cpus.isolated", we can check for those before testing is
started to make sure that there will be no interference. Otherwise,
this test will be skipped if incorrect test failure can happen.
As "cpuset.cpus.isolated" is now available in a non cgroup_debug kernel,
we don't need to check for its existence anymore.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
%.bpf.o objects depend on vmlinux.h, which makes them transitively
dependent on unnecessary libbpf headers. However vmlinux.h doesn't
actually change as often.
When generating vmlinux.h, compare it to a previous version and update
it only if there are changes.
Example of build time improvement (after first clean build):
$ touch ../../../lib/bpf/bpf.h
$ time make -j8
Before: real 1m37.592s
After: real 0m27.310s
Notice that %.bpf.o gen step is skipped if vmlinux.h hasn't changed.
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzY1z5cC7BKye8=A8aTVxpsCzD=p1jdTfKC7i0XVuYoHUQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20240828174608.377204-2-ihor.solodrai@pm.me
Including:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmbRvfEACgkQK/BELZcB
GuOB8w//WLapQpxMw9w+4l3Z3SqxB5gSPF6pdCJwYRrpFGBX1yNZ0vWtF2TpKtOC
NaMa/EC1C2FWjcArCP21uFtDvN04FgXSVl6sjFUHsUf+YALrUfljQk/XFI4SenTq
PtvPv8PVGbhqLtdJDXMlQWBN3RX0qK/PIFmuUX5ySBk7J7k5QyBi2HEuK2DbPM7j
+LMnyTHj5Aa2jRz/NSCDIRKbSFJKgvd8apval2VX0zljjpyqk5KmHHjkLtiOiTTI
G6ZJlRYCn98eTLU2ww8b7/y0vVYop7C1Q7Cyds/72xvW+a3jbSRIGf6yqtmdbMYd
faxRng5rWHWsq3XMZC+Ts9k2FA3pUIvOmfptCFfrQYYXvZI6dD6o7uMko6SF82n4
xEy+H6AEWZXF70xaJDp1cn1PpURJgJly/l/6qAIB746qNT7j/CcOOha1bpbCy81x
EIOl0B4wyJGjQnxjKsH01K9ec3uT6rugbpFEE9PL8l25khhyweBwuQWc2EVxRZgH
ICH4pCmvU9Wy6mpXL2R/SyzECWjgg0oJr+pq3Yxv7xufSGQswWJ/StFozSBHnH01
OGGA/2xMrNeRzlm4PZfRzdAiCfYX9kEodiF1jGLA4B1V5Tx/y1LSX7W/nCeZmlRz
/OhEC07DWZumeSCTe5I+BmZwiXh/DEAlUypDQkVKaaeGltlyvl8=
=8XuD
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
Create a BTF with endianness different from host, make a distilled
base/split BTF pair from it, dump as raw bytes, import again and
verify that endianness is preserved.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240830173406.1581007-1-eddyz87@gmail.com
When building with clang, there's this warning:
vdso_test_getrandom.c:145:40: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
145 | static void *test_vdso_getrandom(void *)
| ^
vdso_test_getrandom.c:155:40: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
155 | static void *test_libc_getrandom(void *)
| ^
vdso_test_getrandom.c:165:43: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
165 | static void *test_syscall_getrandom(void *)
Add the named ctx parameter to quash it.
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
A "%s" is missing in ksft_exit_fail_msg(); instead, use the newly
introduced ksft_exit_fail_perror().
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240830052911.4040970-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
vdso_test_correctness test fails on powerpc:
~ # ./vdso_test_correctness
...
[RUN] Testing clock_gettime for clock CLOCK_REALTIME_ALARM (8)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_BOOTTIME_ALARM (9)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_SGI_CYCLE (10)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
...
[RUN] Testing clock_gettime for clock invalid (-1)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (-2147483648)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (2147483647)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
On powerpc, a call to a VDSO function is not an ordinary C function
call. Unlike several architectures which returns a negative error code
in case of an error, powerpc sets CR[SO] and returns the error code
as a positive value.
Define and use a macro called VDSO_CALL() which takes a pointer
to the function to call, the number of arguments and the arguments.
Also update ABI vdso documentation to reflect this subtlety.
Provide a specific version of VDSO_CALL() for powerpc that negates
the error code on return when CR[SO] is set.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Fixes: 2e9a972566 ("selftests: vdso: Add a selftest for vDSO getcpu()")
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Fixes: b2f1c3db28 ("kselftest: Extend vdso correctness test to clock_gettime64")
Fixes: 4920a2590e ("selftests/vDSO: add tests for vgetrandom")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Running vdso_test_correctness on powerpc64 gives the following warning:
~ # ./vdso_test_correctness
Warning: failed to find clock_gettime64 in vDSO
This is because vdso_test_correctness was built with VDSO_32BIT defined.
__powerpc__ macro is defined on both powerpc32 and powerpc64 so
__powerpc64__ needs to be checked first in vdso_config.h
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Following error occurs when running vdso_test_correctness on powerpc:
~ # ./vdso_test_correctness
[WARN] failed to find vDSO
[SKIP] No vDSO, so skipping clock_gettime() tests
[SKIP] No vDSO, so skipping clock_gettime64() tests
[RUN] Testing getcpu...
[OK] CPU 0: syscall: cpu 0, node 0
On powerpc, vDSO is neither called linux-vdso.so.1 nor linux-gate.so.1
but linux-vdso32.so.1 or linux-vdso64.so.1.
Also search those two names before giving up.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If the getrandom test compiles for an arch, don't exit fatally if the
actual cpu it's running on is unsupported.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Building test_vdso_getrandom currently leads to following issue:
In file included from /home/xry111/git-repos/linux/tools/include/linux/compiler_types.h:36,
from /home/xry111/git-repos/linux/include/uapi/linux/stddef.h:5,
from /home/xry111/git-repos/linux/include/uapi/linux/posix_types.h:5,
from /usr/include/asm/sigcontext.h:12,
from /usr/include/bits/sigcontext.h:30,
from /usr/include/signal.h:301,
from vdso_test_getrandom.c:14:
/home/xry111/git-repos/linux/tools/include/linux/compiler-gcc.h:3:2: error: #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
3 | #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
| ^~~~~
It's because the compiler_types.h inclusion in
include/uapi/linux/stddef.h is expected to be removed by the
header_install.sh script, as compiler_types.h shouldn't be used from
user space.
Add KHDR_INCLUDES before the existing include/uapi inclusion so that
usr/include takes precedence if it's populated.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
CONFIG_FUNCTION_ALIGNMENT=0 is no longer necessary and BULID_VDSO wasn't
spelled right while BUILD_VDSO isn't necessary, so just remove these.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
On systems that set -Wl,--as-needed, putting the -lsodium in the wrong
place on the command line means we get a linker error:
CC vdso_test_chacha
/usr/bin/ld: /tmp/ccKpjnSM.o: in function `main':
vdso_test_chacha.c:(.text+0x276): undefined reference to `crypto_stream_chacha20'
collect2: error: ld returned 1 exit status
Fix this by passing pkg-config's --libs output to the LDFLAGS field
instead of the CFLAGS field, as is customary.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When libsodium is installed into its own prefix, the --cflags output is
needed for the compiler to find libsodium headers.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Don't hard-code x86 specific names. Rather, use vdso_config definitions
to find the correct function matching the architecture.
Add random VDSO function names in names[][]. Remove the #ifdef
CONFIG_VDSO32, as having the name there all the time is harmless and
guaranties a steady index for following strings.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[Jason: add [6] to variable declaration rather than each usage site.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Building test_vdso_chacha currently leads to following issue:
In file included from /home/chleroy/linux-powerpc/include/linux/limits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/local_lim.h:38,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/posix1_lim.h:161,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/limits.h:195,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:203,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/syslimits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:34,
from /tmp/sodium/usr/local/include/sodium/export.h:7,
from /tmp/sodium/usr/local/include/sodium/crypto_stream_chacha20.h:14,
from vdso_test_chacha.c:6:
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:99:6: error: missing binary operator before token "("
99 | # if INT_MAX == 32767
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:102:7: error: missing binary operator before token "("
102 | # if INT_MAX == 2147483647
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:126:6: error: missing binary operator before token "("
126 | # if LONG_MAX == 2147483647
| ^~~~~~~~
This is due to kernel include/linux/limits.h being included instead of
libc's limits.h.
This is because directory include/ is added through option -isystem so
it goes prior to glibc's include directory.
Replace -isystem by -idirafter.
But this implies that now tools/include/linux/linkage.h is included
instead of include/linux/linkage.h, so define a stub for
SYM_FUNC_START() and SYM_FUNC_END().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Architectures use different location for vDSO sources:
arch/mips/vdso
arch/sparc/vdso
arch/arm64/kernel/vdso
arch/riscv/kernel/vdso
arch/csky/kernel/vdso
arch/x86/um/vdso
arch/x86/entry/vdso
arch/powerpc/kernel/vdso
arch/arm/vdso
arch/loongarch/vdso
Don't hard-code vdso sources location in selftest Makefile. Instead
create a vdso/ symbolic link in tools/arch/$arch/ and update Makefile
accordingly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than using pthread_get/set_specific, just use gcc's __thread
annotation, which is noticeably faster and makes the code more obvious.
Also, just have one simplified struct called vgrnd, instead of trying to
split things up semantically. Those divisions were useful when this code
was split across several commit *messages*, but doesn't make as much
sense within a single file. This should make the code more clear and
provide a better example for implementers.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The test case for SME vector length changes via sigreturn use a bit too
much cut'n'paste and only actually changed the SVE vector length in the
test itself. Andre's recent factoring out of the initialisation code caused
this to be exposed and the test to start failing. Fix the test to actually
cover the thing it's supposed to test.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240829-arm64-sme-signal-vl-change-test-v1-1-42d7534cb818@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a new arch_timer_edge_cases selftests that validates:
* timers above the max TVAL value
* timers in the past
* moving counters ahead and behind pending timers
* reprograming timers
* timers fired multiple times
* masking/unmasking using the timer control mask
These are intentionally unusual scenarios to stress compliance with
the arm architecture.
Co-developed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-3-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Break up the asm instructions poking daifclr and daifset to handle
interrupts. R_RBZYL specifies pending interrupts will be handle after
context synchronization events such as an ISB.
Introduce a function wrapper for the WFI instruction.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-2-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add KVM selftests' one-off assets, e.g. the Makefile, to the .gitignore so
that they are explicitly included. The justification for omitting the
one-offs was that including them wouldn't help prevent mistakes:
Deliberately do not include the one-off assets, e.g. config, settings,
.gitignore itself, etc as Git doesn't ignore files that are already in
the repository. Adding the one-off assets won't prevent mistakes where
developers forget to --force add files that don't match the "allowed".
Turns out that's not the case, as W=1 will generate warnings, and the
amazing-as-always kernel test bot reports new warnings:
tools/testing/selftests/kvm/.gitignore: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/Makefile: warning: ignored by one of the .gitignore files
>> tools/testing/selftests/kvm/Makefile.kvm: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/config: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/settings: warning: ignored by one of the .gitignore files
Fixes: 43e96957e8 ("KVM: selftests: Use pattern matching in .gitignore")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408211818.85zIkDEK-lkp@intel.com
Link: https://lore.kernel.org/r/20240828215800.737042-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test to verify that KVM correctly exits (or not) when a vCPU's
coalesced I/O ring is full (or isn't). Iterate over all legal starting
points in the ring (with an empty ring), and verify that KVM doesn't exit
until the ring is full.
Opportunistically verify that KVM exits immediately on non-coalesced I/O,
either because the MMIO/PIO region was never registered, or because a
previous region was unregistered.
This is a regression test for a KVM bug where KVM would prematurely exit
due to bad math resulting in a false positive if the first entry in the
ring was before the halfway mark. See commit 92f6d41304 ("KVM: Fix
coalesced_mmio_has_room() to avoid premature userspace exit").
Enable the test for x86, arm64, and risc-v, i.e. all architectures except
s390, which doesn't have MMIO.
On x86, which has both MMIO and PIO, interleave MMIO and PIO into the same
ring, as KVM shouldn't exit until a non-coalesced I/O is encountered,
regardless of whether the ring is filled with MMIO, PIO, or both.
Lastly, wrap the coalesced I/O ring in a structure to prepare for a
potential future where KVM supports multiple ring buffers beyond KVM's
"default" built-in buffer.
Link: https://lore.kernel.org/all/20240820133333.1724191-1-ilstam@amazon.com
Cc: Ilias Stamatis <ilstam@amazon.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240828181446.652474-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Regression test for ae20eef5 ("KVM: SVM: Update SEV-ES shutdown intercepts
with more metadata"). Test confirms userspace is correctly indicated of
a guest shutdown not previous behavior of an EINVAL from KVM_RUN.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Alper Gun <alpergun@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Tested-by: Pratik R. Sampat <pratikrajesh.sampat@amd.com>
Link: https://lore.kernel.org/r/20240709182936.146487-1-pgonda@google.com
[sean: clobber IDT to ensure #UD leads to SHUTDOWN]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Unlink memory regions when freeing a VM, even though it's not strictly
necessary since all tracking structures are freed soon after. The time
spent deleting entries is negligible, and not unlinking entries is
confusing, e.g. it's easy to overlook that the tree structures are
freed by the caller.
Link: https://lore.kernel.org/r/20240802201429.338412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove sefltests' kvm_memcmp_hva_gva(), which has literally never had a
single user since it was introduced by commit 783e9e5126 ("kvm:
selftests: add API testing infrastructure").
Link: https://lore.kernel.org/r/20240802200853.336512-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This patch adds test cases for iter next method returning valid
pointer, which can also used as usage examples.
Currently iter next method should return valid pointer.
iter_next_trusted is the correct usage and test if iter next method
return valid pointer. bpf_iter_task_vma_next has KF_RET_NULL flag,
so the returned pointer may be NULL. We need to check if the pointer
is NULL before using it.
iter_next_trusted_or_null is the incorrect usage. There is no checking
before using the pointer, so it will be rejected by the verifier.
iter_next_rcu and iter_next_rcu_or_null are similar test cases for
KF_RCU_PROTECTED iterators.
iter_next_rcu_not_trusted is used to test that the pointer returned by
iter next method of KF_RCU_PROTECTED iterator cannot be passed in
KF_TRUSTED_ARGS kfuncs.
iter_next_ptr_mem_not_trusted is used to test that base type
PTR_TO_MEM should not be combined with type flag PTR_TRUSTED.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848709758F6922F02AF9F1F99962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tests the epilogue patching when the main prog has
multiple BPF_EXIT. The verifier should have patched the 2nd (and
later) BPF_EXIT with a BPF_JA that goes back to the earlier
patched epilogue instructions.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a pro/epilogue test when the main prog has a goto insn
that goes back to the very first instruction of the prog. It is
to test the correctness of the adjust_jmp_off(prog, 0, delta)
after the verifier has applied the prologue and/or epilogue patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a gen_epilogue test to test a main prog
using a bpf_tail_call.
A non test_loader test is used. The tailcall target program,
"test_epilogue_subprog", needs to be used in a struct_ops map
before it can be loaded. Another struct_ops map is also needed
to host the actual "test_epilogue_tailcall" struct_ops program
that does the bpf_tail_call. The earlier test_loader patch
will attach all struct_ops maps but the bpf_testmod.c does
not support >1 attached struct_ops.
The earlier patch used the test_loader which has already covered
checking for the patched pro/epilogue instructions. This is done
by the __xlated tag.
This patch goes for the regular skel load and syscall test to do
the tailcall test that can also allow to directly pass the
the "struct st_ops_args *args" as ctx_in to the
SEC("syscall") program.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test adds a new struct_ops "bpf_testmod_st_ops" in bpf_testmod.
The ops of the bpf_testmod_st_ops is triggered by new kfunc calls
"bpf_kfunc_st_ops_test_*logue". These new kfunc calls are
primarily used by the SEC("syscall") program. The test triggering
sequence is like:
SEC("syscall")
syscall_prologue(struct st_ops_args *args)
bpf_kfunc_st_op_test_prologue(args)
st_ops->test_prologue(args)
.gen_prologue adds 1000 to args->a
.gen_epilogue adds 10000 to args->a
.gen_epilogue will also set the r0 to 2 * args->a.
The .gen_prologue and .gen_epilogue of the bpf_testmod_st_ops
will test the prog->aux->attach_func_name to decide if
it needs to generate codes.
The main programs of the pro_epilogue.c will call a
new kfunc bpf_kfunc_st_ops_inc10 which does "args->a += 10".
It will also call a subprog() which does "args->a += 1".
This patch uses the test_loader infra to check the __xlated
instructions patched after gen_prologue and/or gen_epilogue.
The __xlated check is based on Eduard's example (Thanks!) in v1.
args->a is returned by the struct_ops prog (either the main prog
or the epilogue). Thus, the __retval of the SEC("syscall") prog
is checked. For example, when triggering the ops in the
'SEC("struct_ops/test_epilogue") int test_epilogue'
The expected args->a is +1 (subprog call) + 10 (kfunc call)
+ 10000 (.gen_epilogue) = 10011.
The expected return value is 2 * 10011 (.gen_epilogue).
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In test_loader based tests to bpf_map__attach_struct_ops()
before call to bpf_prog_test_run_opts() in order to trigger
bpf_struct_ops->reg() callbacks on kernel side.
This allows to use __retval macro for struct_ops tests.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When AVIC, and thus IPI virtualization on AMD, is enabled, the CPU will
virtualize ICR writes. Unfortunately, the CPU doesn't do a very good job,
as it fails to clear the BUSY bit and also allows writing ICR2[23:0],
despite them being "RESERVED MBZ". Account for the quirky behavior in
the xapic_state test to avoid failures in a configuration that likely has
no hope of ever being enabled in production.
Link: https://lore.kernel.org/r/20240719235107.3023592-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that the BUSY bit mess is gone (for x2APIC), verify that the *guest*
can read back the ICR value that it wrote. Due to the divergent
behavior between AMD and Intel with respect to the backing storage of the
ICR in the vAPIC page, emulating a seemingly simple MSR write is quite
complex.
Link: https://lore.kernel.org/r/20240719235107.3023592-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Actually test x2APIC ICR reserved bits instead of deliberately skipping
them. The behavior that is observed when IPI virtualization is enabled is
the architecturally correct behavior, KVM is the one who was wrong, i.e.
KVM was missing reserved bit checks.
Fixes: 4b88b1a518 ("KVM: selftests: Enhance handling WRMSR ICR register in x2APIC mode")
Link: https://lore.kernel.org/r/20240719235107.3023592-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't test the ICR BUSY bit when x2APIC is enabled as AMD and Intel have
different behavior (AMD #GPs, Intel ignores), and the fact that the CPU
performs the reserved bit checks when IPI virtualization is enabled makes
it impossible for KVM to precisely emulate one or the other.
Link: https://lore.kernel.org/r/20240719235107.3023592-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to allow and expect #GP on x2APIC MSRs, and opportunistically
have the existing helper spit out a more useful error message if an
unexpected exception occurs.
Link: https://lore.kernel.org/r/20240719235107.3023592-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that selftests support printf() in the guest, report unexpected
exceptions via the regular assertion framework. Exceptions were special
cased purely to provide a better error message. Convert only x86 for now,
as it's low-hanging fruit (already formats the assertion in the guest),
and converting x86 will allow adding asserts in x86 library code without
needing to update multiple tests.
Once all other architectures are converted, this will allow moving the
reporting to common code, which will in turn allow adding asserts in
common library code, and will also allow removing UCALL_UNHANDLED.
Link: https://lore.kernel.org/r/20240719235107.3023592-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Open code a version of vcpu_run() in the guest_printf test in anticipation
of adding UCALL_ABORT handling to _vcpu_run(). The guest_printf test
intentionally generates asserts to verify the output, and thus needs to
bypass common assert handling.
Open code a helper in the guest_printf test, as it's not expected that any
other test would want to skip _only_ the UCALL_ABORT handling.
Link: https://lore.kernel.org/r/20240719235107.3023592-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
We add a selftest to check that the new feature added in
commit 05ea491641 ("tcp: add support for SO_PEEK_OFF socket option")
works correctly.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://patch.msgid.link/20240828183752.660267-3-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dropping a local kptr, any kptr stashed into it is supposed to be
freed through bpf_obj_free_fields->__bpf_obj_drop_impl recursively. Add a
test to make sure it happens.
The test first stashes a referenced kptr to "struct task" into a local
kptr and gets the reference count of the task. Then, it drops the local
kptr and reads the reference count of the task again. Since
bpf_obj_free_fields and __bpf_obj_drop_impl will go through the local kptr
recursively during bpf_obj_drop, the dtor of the stashed task kptr should
eventually be called. The second reference count should be one less than
the first one.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240827011301.608620-1-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmbQcqISHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkOJkP+QHZx2LCilc0uvrYkqWBz7aYEigISK+6
NdGiF/c9FO/dvmisUbs7i48TXKplHu56bR0YTVm2pdKUNcXO5jUgy+s4n9uncsCF
/Cq8WnaXJ3THqKKNlMnSeTJ1URE47iagI+LdX4g9a5HE5GgrORcHm4mfcn7m68EP
pZ+TaPDw9jp+o+1nkpqgPe8Vdz1dPlqC1S2KQMl0S60WcSlYgDpVUtVU5m2mitJ1
giNHXcU2UXxFFyvqhHXyQIFIkKU6sNbD32cm9VXDMw680KjmBM63Fz5EIiZospkz
efQWHn/xwqZNEOLdN5sPUtKLv02D8sTusfTaGWaNulmNd346ABrkS+fDjHqRxLFb
OBKXOn4AG1OPCs4MgrgtJf7mrcwJErbE/21dLqGPZWkOzqbe+7r8pXn0XtS9m+gR
V0IkSpwrS1D394nP2TVmw0B+LwXMA3ItzAjNa8Lemr7TVEpAmuCdAz2XiR13KZfw
B0DBtWCWr5skgWZdlhofi71OOXC9bWIq75i+aSZR/KXqRj4I38OsargSVNQve/H4
OmOitt1w0ZRhmb+HmW+xgIffikGsi9YEO165UUzUQCQVn00r0EHP8T3Q2d1/2Hzx
FtnaYFsBAI2TV2m2DTuJNWc0Fa3G08tJWkoEqbrWeAuebOk0oKWExsXzVfMOrig1
a9nNA98DmlN3
=yJIE
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
Charlie Jenkins <charlie@rivosinc.com> says:
There have been a couple of reports that using the hint address to
restrict the address returned by mmap hint address has caused issues in
applications. A different solution for restricting addresses returned by
mmap is necessary to avoid breakages.
[Palmer: This also just wasn't doing the right thing in the first place,
as it didn't handle the sv39 cases we were trying to deal with.]
* b4-shazam-merge:
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-0-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The mmap behavior that restricts the addresses returned by mmap caused
unexpected behavior, so get rid of the test cases that check that
behavior.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: 73d05262a2 ("selftests: riscv: Generalize mm selftests")
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-2-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.
Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.
While at it, fix the indentation around, which is wrong since the same
commit.
Fixes: 47867f0a7e ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.
This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Largely inspired from hid_bpf.c for the fixture setup.
Create a couple of tests for hidraw:
- create a uhid device and check if the fixture is working properly
- inject one uhid event and read it through hidraw
These tests are not that useful for now, but will be once we start adding
the ioctl and BPFs to revoke the hidraw node.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-3-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
When adding new tests programs, we need the same mechanics to create
new virtual devices, and read from their matching hidraw node.
Extract the common part into its own header so we can easily add new
tests C-files.
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-2-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Broonie reports that the set_id_regs test is failing as of commit
5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is
presented to the guest"). The test does not anticipate the 'late' ID
register fixup where KVM clobbers the GIC field in absence of GICv3.
While the field technically has FTR_LOWER_SAFE behavior, fix the issue
by setting it to an exact value of 0, matching the effect of the 'late'
fixup.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240829004622.3058639-1-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
This patch adds test cases for zero offset (implicit cast) or non-zero
offset pointer as KF_ACQUIRE kfuncs argument. Currently KF_ACQUIRE
kfuncs should support passing in pointers like &sk->sk_write_queue
(non-zero offset) or &sk->__sk_common (zero offset) and not be rejected
by the verifier.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848CB6F0D4D9068669A905B99952@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Smatch reported the following warning:
./tools/testing/selftests/bpf/testing_helpers.c:455 get_xlated_program()
warn: variable dereferenced before check 'buf' (see line 454)
It seems correct,so let's modify it based on it's suggestion.
Actually,commit b23ed4d74c ("selftests/bpf: Fix invalid pointer
check in get_xlated_program()") fixed an issue in the test_verifier.c
once,but it was reverted this time.
Let's solve this issue with the minimal changes possible.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/1eb3732f-605a-479d-ba64-cd14250cbf91@stanley.mountain/
Fixes: b4b7a4099b ("selftests/bpf: Factor out get_xlated_program() helper")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://lore.kernel.org/r/20240820023622.29190-1-hao.ge@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Thanks to the previous commit, the MPTCP subflows are now closed on both
directions even when only the MPTCP path-manager of one peer asks for
their closure.
In the two tests modified here -- "userspace pm add & remove address"
and "userspace pm create destroy subflow" -- one peer is controlled by
the userspace PM, and the other one by the in-kernel PM. When the
userspace PM sends a RM_ADDR notification, the in-kernel PM will
automatically react by closing all subflows using this address. Now,
thanks to the previous commit, the subflows are properly closed on both
directions, the userspace PM can then no longer closes the same
subflows if they are already closed. Before, it was OK to do that,
because the subflows were still half-opened, still OK to send a RM_ADDR.
In other words, thanks to the previous commit closing the subflows, an
error will be returned to the userspace if it tries to close a subflow
that has already been closed. So no need to run this command, which mean
that the linked counters will then not be incremented.
These tests are then no longer sending both a RM_ADDR, then closing the
linked subflow just after. The test with the userspace PM on the server
side is now removing one subflow linked to one address, then sending
a RM_ADDR for another address. The test with the userspace PM on the
client side is now only removing the subflow that was previously
created.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-2-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setup trace points, add a new ftrace instance in order to not interfere
with the rest of the system, filtering by net namespace cookies.
Raise a new background thread that parses trace_pipe, matches them with
the list of expected events.
Wiring up trace events to selftests provides another insight if there is
anything unexpected happining in the tcp-ao code (i.e. key rotation when
it's not expected).
Note: in real programs libtraceevent should be used instead of this
manual labor of setting ftrace up and parsing. I'm not using it here
as I don't want to have an .so library dependency that one would have to
bring into VM or DUT (Device Under Test). Please, don't copy it over
into any real world programs, that aren't tests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-8-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On tests that are expecting failure the timeout value is
TEST_RETRANSMIT_SEC == 1 second. Which is big enough for most of devices
under tests. But on a particularly slow machine/VM, 1 second might be
not enough for another thread to be scheduled and attempt to connect().
It is not a problem for tests that expect connect() to succeed as
the timeout value for them (TEST_TIMEOUT_SEC) is intentionally bigger.
One obvious way to solve this would be to increase TEST_RETRANSMIT_SEC.
But as all tests would increase the timeouts, that's going to sum up.
But here is less obvious way that keeps timeouts for expected connect()
failures low: just synchronize the two threads, which will assure that
before counter checks the other thread got a chance to run and timeout
on connect(). The expected increase of the related counter for listen()
socket will yet test the expected failure.
Never happens on my machine, but I suppose the majority of netdev's
connect-deny-* flakes [1] are caused by this.
Prevents the following testing issue:
> # selftests: net/tcp_ao: connect-deny_ipv6
> # 1..21
> # # 462[lib/setup.c:243] rand seed 1720905426
> # TAP version 13
> # ok 1 Non-AO server + AO client
> # not ok 2 Non-AO server + AO client: TCPAOKeyNotFound counter did not increase: 0 <= 0
> # ok 3 AO server + Non-AO client
> # ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1
...
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao/results/681741/6-connect-deny-ipv6/stdout
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-7-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not safe to use '%zu' specifier for printing uint64_t on 32-bit
systems. For uint64_t, we should use the 'PRIu64' macro from
the inttypes.h library. This ensures that the uint64_t is printed
correctly from the selftests regardless of the system architecture.
Signed-off-by: Mohammad Nassiri <mnassiri@ciena.com>
[Added missing spaces in fail/ok messages and uint64_t cast in
setsockopt-closed, as otherwise it was giving warnings on 64bit.
And carried it to netdev ml]
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-6-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch_save_ns() helper suppose to help switching to another
namespace for some action and to return back to original namespace.
The fd should be closed.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-5-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turns to be that open_netns() is called rarely from the child-thread
and more often from parent-thread. Yet, on initialization of kconfig
checks, either of threads may reach kconfig_lock mutex first.
VRF-related checks do create a temporary ksft-check VRF in
an unshare()'d namespace and than setns() back to the original.
As original was opened from "/proc/self/ns/net", it's valid for
thread-leader (parent), but it's invalid for the child, resulting
in the following failure on tests that check has_vrfs() support:
> # ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> # not ok 55 # error 381[unsigned-md5.c:24] Failed to add a VRF: -17
> # not ok 56 # error 383[unsigned-md5.c:33] Failed to add a route to VRF: -22: Key was rejected by service
> not ok 1 selftests: net/tcp_ao: unsigned-md5_ipv6 # exit=1
Use "/proc/thread-self/ns/net" which is valid for any thread.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-4-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the functions in tcp-ao lib/ return negative errno or -1 in case
of a failure. That creates inconsistencies in lib/kconfig, which saves
what was the error code. As well as the uninitialized kconfig value is
-1, which also may be the result of a check.
Define KCONFIG_UNKNOWN and save negative return code, rather than
libc-style errno.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-3-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of pre-allocating a fixed-sized buffer of TEST_MSG_BUFFER_SIZE
and printing into it, call vsnprintf() with str = NULL, which will
return the needed size of the buffer. This hack is documented in
man 3 vsnprintf.
Essentially, in C++ terms, it re-invents std::stringstream, which is
going to be used to print different tracing paths and formatted strings.
Use it straight away in __test_print() - which is thread-safe version of
printing in selftests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-2-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given how tortuous and fragile the whole lack-of-GICv3 story is,
add a selftest checking that we don't regress it.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on egress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on ingress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a method to quickly verify whether safe RET operates properly on
a given system using perf tool.
Also, add a selftest which does the same thing.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240731160531.28640-1-bp@kernel.org
Previously, the mapped ring-buffer layout caused misalignment between
the meta-page and sub-buffers when the sub-buffer size was not a
multiple of PAGE_SIZE. This prevented hardware with larger TLB entries
from utilizing them effectively.
Add a padding with the zero-page between the meta-page and sub-buffers.
Also update the ring-buffer map_test to verify that padding.
Link: https://lore.kernel.org/20240628104611.1443542-1-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adds a selftest that creates two virtual interfaces, assigns one to a
new namespace, and assigns IP addresses to both.
It listens on the destination interface using socat and configures a
dynamic target on netconsole, pointing to the destination IP address.
The test then checks if the message was received properly on the
destination interface.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240822095652.3806208-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZsiMrQAKCRDbK58LschI
g1mtAP9wBoNO9sNRrJ2OUg69R5uSTT2//v7icN01xwVtx9ir/AD+PJ+v/WG1QVlM
6GNsPoGtQ53ptuiJFfXEkuVELGqKywY=
=I/T4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-08-23
We've added 10 non-merge commits during the last 15 day(s) which contain
a total of 10 files changed, 222 insertions(+), 190 deletions(-).
The main changes are:
1) Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime,
from Alan Maguire.
2) Add a batch of BPF selftest improvements which fix a few bugs and add
missing features to improve the test coverage of sockmap/sockhash,
from Michal Luczaj.
3) Fix a false-positive Smatch-reported off-by-one in tcp_validate_cookie()
which is part of the test_tcp_custom_syncookie BPF selftest,
from Kuniyuki Iwashima.
4) Fix the flow_dissector BPF selftest which had a bug in IP header's
tot_len calculation doing subtraction after htons() instead of inside
htons(), from Asbjørn Sloth Tønnesen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftest: bpf: Remove mssind boundary check in test_tcp_custom_syncookie.c.
selftests/bpf: Introduce __attribute__((cleanup)) in create_pair()
selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected()
selftests/bpf: Honour the sotype of af_unix redir tests
selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible()
selftests/bpf: Socket pair creation, cleanups
selftests/bpf: Support more socket types in create_pair()
selftests/bpf: Avoid subtraction after htons() in ipip tests
selftests/bpf: add sockopt tests for TCP_BPF_SOCK_OPS_CB_FLAGS
bpf/bpf_get,set_sockopt: add option to set TCP-BPF sock ops flags
====================
Link: https://patch.msgid.link/20240823134959.1091-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmbHtrsACgkQ1V2XiooU
IOTZ8g/+OW8W468NmBHA2zrTWei19irA1iCBLvXMPakice0+ADU51eqVp6uUrCeP
iBUZGMtCq4WzFBrAEBePK3UNxxMHquWvAsA0kO/XW95KVM++s9ykF62q89jugMb3
CADEv/TxgJrkzpLWclxHNTCWMKpURijlkjT+kCMR4fKbeQnB6e/jI+2sdl7l5iRG
tHHm8ieewNNKE+jlSUJUrPEIM3tXRaZh9+JmbClfsF6wUw7qLmT/7P92aHBX4Owp
tpqi/Xc5/2k+Ud96a8u1NYrLLG+L70uz3SaeE7PvhaRavFuYftk2XLB4L2umtEfb
ZCZO/lCadH23XrVAUs5EtCDk4Tu3rZdTDsKYm2qS66uBsh/e6hg+j/cIPSO8jsNq
5Zbs/XzPFJ1PUpXVy8Sfs9vxH+cDuiqhy9nfKrbQotsqtoW+z52UoFH4WAjfmpqb
XMI+yeSTXYl1KIo2LV408VFRFRGcstBvXE7bOn7ufSrltRZcFdx7wqQBgVbh1zvA
1NTzIguZ+Lf2hPcNLPQd/f2vghKRTI7gUwzlDRw6so6NOWUM6/yV5KyoiZKekHjC
S6+M8cdiyMH8DmSsvAb46YKtDxYuIHqLVxuVqjfBHrMo1hLIo5smMCeCRA1Vabd5
/E4DTwpN5tVWX+HZl1wcAtQpXhcTktWM0qGSPnlRS11gwbAGWvk=
=O8tu
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
Patch #1 fix checksum calculation in nfnetlink_queue with SCTP,
segment GSO packet since skb_zerocopy() does not support
GSO_BY_FRAGS, from Antonio Ojea.
Patch #2 extend nfnetlink_queue coverage to handle SCTP packets,
from Antonio Ojea.
Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink,
from Donald Hunter.
Patch #4 adds a dedicate commit list for sets to speed up
intra-transaction lookups, from Florian Westphal.
Patch #5 skips removal of element from abort path for the pipapo
backend, ditching the shadow copy of this datastructure
is sufficient.
Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to
let users of conncoiunt decide when to enable conntrack,
this is needed by openvswitch, from Xin Long.
Patch #7 pass context to all nft_parse_register_load() in
preparation for the next patch.
Patches #8 and #9 reject loads from uninitialized registers from
control plane to remove register initialization from
datapath. From Florian Westphal.
* tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: don't initialize registers in nft_do_chain()
netfilter: nf_tables: allow loads only when register is initialized
netfilter: nf_tables: pass context structure to nft_parse_register_load
netfilter: move nf_ct_netns_get out of nf_conncount_init
netfilter: nf_tables: do not remove elements if set backend implements .abort
netfilter: nf_tables: store new sets in dedicated list
netfilter: nfnetlink: convert kfree_skb to consume_skb
selftests: netfilter: nft_queue.sh: sctp coverage
netfilter: nfnetlink_queue: unbreak SCTP traffic
====================
Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On some machines with a large number of CPUs there is a sizable delay
between an atomic replace occurring and when sysfs updates accordingly.
This fix uses 'loop_until' to wait for the atomic replace to unload all
previous livepatches.
Reported-by: CKI Project <cki-project@redhat.com>
Closes: https://datawarehouse.cki-project.org/kcidb/tests/redhat:1413102084-x86_64-kernel_upt_28
Signed-off-by: Ryan Sullivan <rysulliv@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://lore.kernel.org/r/20240822173122.14760-1-rysulliv@redhat.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
This results in passing 0 or just IOMMU_CACHE to iommu_map(). Most of
the page table formats don't like this:
amdv1 - -EINVAL
armv7s - returns 0, doesn't update mapped
arm-lpae - returns 0 doesn't update mapped
dart - returns 0, doesn't update mapped
VT-D - returns -EINVAL
Unfortunately the three formats that return 0 cause serious problems:
- Returning ret = but not uppdating mapped from domain->map_pages()
causes an infinite loop in __iommu_map()
- Not writing ioptes means that VFIO/iommufd have no way to recover them
and we will have memory leaks and worse during unmap
Since almost nothing can support this, and it is a useless thing to do,
block it early in iommufd.
Cc: stable@kernel.org
Fixes: aad37e71d5 ("iommufd: IOCTLs for the io_pagetable")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/1-v1-1211e1294c27+4b1-iommu_no_prot_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nothing special, just test how long insertion of x policies takes.
This should ideally show linear insertion speeds.
Do not run this by default, it has little value, but it can be useful to
check for insertion speed chahnges when altering the xfrm policy db
implementation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Save pkg-config output for libpcap as simply-expanded variables.
For an obscure reason 'shell' call in LDLIBS/CFLAGS recursively
expanded variables makes *.test.o files compilation non-parallel
when make is executed with -j option.
While at it, reuse 'pkg-config --cflags' call to define
-DTRAFFIC_MONITOR=1 option, it's exit status is the same as for
'pkg-config --exists'.
Fixes: f52403b6bf ("selftests/bpf: Add traffic monitor functions.")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823194409.774815-1-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Test stashing both referenced kptr and local kptr into local kptrs. Then,
test unstashing them.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-6-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of parsing text-based /proc/<pid>/maps file, try to use
PROCMAP_QUERY ioctl() to simplify and speed up data fetching.
This logic is used to do uprobe file offset calculation, so any bugs in
this logic would manifest as failing uprobe BPF selftests.
This also serves as a simple demonstration of one of the intended uses.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240806230319.869734-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract local label length as a #define directive and
elaborate why 'i % MAX_LOCAL_LABELS' expression is needed
for local labels array initialization.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Depending on kernel parameters, x86 jit generates either retq or jump
to rethunk for 'exit' instruction. The difference could be seen when
kernel is booted with and without mitigations=off parameter.
Relax the verifier_tailcall_jit test case to match both variants.
Fixes: e5bdd6a8be ("selftests/bpf: validate jit behaviour for tail calls")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
At the moment, when test_loader.c:get_current_arch() can't determine
the arch, it returns 0. The arch check in run_subtest() looks as
follows:
if ((get_current_arch() & spec->arch_mask) == 0) {
test__skip();
return;
}
Which means that all test_loader based tests would be skipped if arch
could not be determined. get_current_arch() recognizes x86_64, arm64
and riscv64. Which means that CI skips test_loader tests for s390.
Fix this by making sure that get_current_arch() always returns
non-zero value. In combination with default spec->arch_mask == -1 this
should cover all possibilities.
Fixes: f406026fef ("selftests/bpf: by default use arch mask allowing all archs")
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently a number of SVE/SME related tests have almost identical
functions to enumerate all supported vector lengths. However over time
the copy&pasted code has diverged, allowing some bugs to creep in:
- fake_sigreturn_sme_change_vl reports a failure, not a SKIP if only
one vector length is supported (but the SVE version is fine)
- fake_sigreturn_sme_change_vl tries to set the SVE vector length, not
the SME one (but the other SME tests are fine)
- za_no_regs keeps iterating forever if only one vector length is
supported (but za_regs is correct)
Since those bugs seem to be mostly copy&paste ones, let's consolidate
the enumeration loop into one shared function, and just call that from
each test. That should fix the above bugs, and prevent similar issues
from happening again.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240821164401.3598545-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check if veth pair was created and if yes, xfail on setting IP address
logging an informational message.
Use XFAIL instead of SKIP for unsupported ethtool APIs.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-4-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement on/off testing for all non-fixed features via while loop.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-3-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check if the netdev list is empty and create veth pair to be used for
feature on/off testing.
Remove the veth pair after testing is complete.
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821171903.118324-2-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution
of tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=htcO
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
Add a selftest to confirm the issue, which gets -EINVAL when update
attached freplace prog to prog_array map, has been fixed.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
328/25 tailcalls/tailcall_freplace:OK
328 tailcalls:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KVM_CAP_HYPERV_DIRECT_TLBFLUSH is only reported when KVM runs on top of
Hyper-V and hyperv_evmcs/hyperv_svm_test don't need that, these tests check
that the feature is properly emulated for Hyper-V on KVM guests. There's no
corresponding CAP for that, the feature is reported in
KVM_GET_SUPPORTED_HV_CPUID.
Hyper-V specific CPUIDs are not reported by KVM_GET_SUPPORTED_CPUID,
implement dedicated kvm_hv_cpu_has() helper to do the job.
Fixes: 6dac119518 ("KVM: selftests: Make Hyper-V tests explicitly require KVM Hyper-V support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since there is 'hyperv.c' for Hyper-V specific functions already, move
Hyper-V specific functions out of processor.c there.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM exposes the OS double lock feature bit to Guests but returns
RAZ/WI on Guest OSDLR_EL1 access. This breaks Guest migration between
systems where this feature differ. Add support to make this feature
writable from userspace by setting the mask bit. While at it, set the
mask bits for the exposed WRPs(Number of Watchpoints) as well.
Also update the selftest to cover these fields.
However we still can't make BRPs and CTX_CMPs fields writable, because
as per ARM ARM DDI 0487K.a, section D2.8.3 Breakpoint types and
linking of breakpoints, highest numbered breakpoints(BRPs) must be
context aware breakpoints(CTX_CMPs). KVM does not trap + emulate the
breakpoint registers, and as such cannot support a layout that misaligns
with the underlying hardware.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20240816132819.34316-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Use kfunc_bpf_cast_to_kern_ctx() and kfunc_bpf_rdonly_cast() to verify
that bpf_fastcall pattern is recognized for kfunc calls.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If test case does not specify architecture via __arch_* macro consider
that it should be run for all architectures.
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and selftests parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.
To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A few tests check if nettest exists in the $PATH before adding
$PWD to $PATH and re-checking. They don't discard stderr on
the first check (and nettest is built as part of selftests,
so it's pretty normal for it to not be available in system $PATH).
This leads to output noise:
which: no nettest in (/home/virtme/tools/fs/bin:/home/virtme/tools/fs/sbin:/home/virtme/tools/fs/usr/bin:/home/virtme/tools/fs/usr/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
Add a common helper for the check which does silence stderr.
There is another small functional change hiding here, because pmtu.sh
and fib_rule_tests.sh used to return from the test case rather than
completely exit. Building nettest is not hard, there should be no need
to maintain the ability to selectively skip cases in its absence.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240821012227.1398769-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
At some point there'd been a dumb braino during the dup_fd()
calling conventions change; caught by smatch and immediately fixed.
The trouble is, there had been no test coverage for the dup_fd() failure
handling - neither in kselftests nor in LTP. Fortunately, it can be
triggered on stock kernel - ENOMEM would require fault injection, but
EMFILE can be had with sysctl alone (fs.nr_open).
Add a test for dup_fd() failure.
Fixed up commit log and short log - Shuah Khan
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Smatch reported a possible off-by-one in tcp_validate_cookie().
However, it's false positive because the possible range of mssind is
limited from 0 to 3 by the preceding calculation.
mssind = (cookie & (3 << 6)) >> 6;
Now, the verifier does not complain without the boundary check.
Let's remove the checks.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/6ae12487-d3f1-488b-9514-af0dac96608f@stanley.mountain/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240821013425.49316-1-kuniyu@amazon.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Source the ethtool library from the correct path and avoid the following
error:
./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory
Fixes: 40d269c000 ("selftests: forwarding: Move several selftests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both __xlated and __jited work with disassembly.
It is logical to have both work in a similar manner.
This commit updates __xlated macro handling in test_loader.c by making
it expect matches on sequential lines, same way as __jited operates.
For example:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("3: r0 = &(void __percpu *)(r0)") ;; matched on line N+1
Also:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("...") ;; not matched
__xlated("3: r0 = &(void __percpu *)(r0)") ;; mantched on any
;; line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A program calling sub-program which does a tail call.
The idea is to verify instructions generated by jit for tail calls:
- in program and sub-program prologues;
- for subprogram call instruction;
- for tail call itself.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow to verify jit behaviour by writing tests as below:
SEC("tp")
__arch_x86_64
__jited(" endbr64")
__jited(" nopl (%rax,%rax)")
__jited(" xorq %rax, %rax")
...
__naked void some_test(void)
{
asm volatile (... ::: __clobber_all);
}
Allow regular expressions in patterns, same way as in __msg.
By default assume that each __jited pattern has to be matched on the
next consecutive line of the disassembly, e.g.:
__jited(" endbr64") # matched on line N
__jited(" nopl (%rax,%rax)") # matched on line N+1
If match occurs on a wrong line an error is reported.
To override this behaviour use __jited("..."), e.g.:
__jited(" endbr64") # matched on line N
__jited("...") # not matched
__jited(" nopl (%rax,%rax)") # matched on any line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a utility function to get disassembled text for jited
representation of a BPF program designated by file descriptor.
Function prototype looks as follows:
int get_jited_program_text(int fd, char *text, size_t text_sz)
Where 'fd' is a file descriptor for the program, 'text' and 'text_sz'
refer to a destination buffer for disassembled text.
Output format looks as follows:
18: 77 06 ja L0
1a: 50 pushq %rax
1b: 48 89 e0 movq %rsp, %rax
1e: eb 01 jmp L1
20: 50 L0: pushq %rax
21: 50 L1: pushq %rax
^ ^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^
| binary insn | textual insn
| representation | representation
| |
instruction offset inferred local label name
The code and makefile changes are inspired by jit_disasm.c from bpftool.
Use llvm libraries to disassemble BPF program instead of libbfd to avoid
issues with disassembly output stability pointed out in [1].
Selftests makefile uses Makefile.feature to detect if LLVM libraries
are available. If that is not the case selftests build proceeds but
the function returns -EOPNOTSUPP at runtime.
[1] commit eb9d1acf63 ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Upcoming changes require a notation to specify regular expression
matches for regular verifier log messages, disassembly of BPF
instructions, disassembly of jited instructions.
Neither basic nor extended POSIX regular expressions w/o additional
escaping are good for this role because of wide use of special
characters in disassembly, for example:
movq -0x10(%rbp), %rax ;; () are special characters
cmpq $0x21, %rax ;; $ is a special character
*(u64 *)(r10 -16) = r1 ;; * and () are special characters
This commit borrows syntax from LLVM's FileCheck utility.
It replaces __regex macro with ability to embed regular expressions
in __msg patters using "{{" "}}" pairs for escaping.
Syntax for __msg patterns:
pattern := (<verbatim text> | regex)*
regex := "{{" <posix extended regular expression> "}}"
For example, pattern "foo{{[0-9]+}}" matches strings like
"foo0", "foo007", etc.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.
Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:
/* seq A */ /* seq B */
__tag("foo") __tag("foo")
__tag("bar") __tag("bar")
__tag("foo")
Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:
#define __msg(msg) \
__attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))
Using this definition the "seq A" from example above is translated to
BTF as follows:
[..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1
Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.
Fixes: 537c3f66ea ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.
Fixes: 4ef5d6af49 ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_loader based tests in the verbose mode each matched
message leaves a trace in the stderr, e.g.:
./test_progs -vvv -t ...
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
This is not very helpful when debugging such tests and clobbers the
log a lot.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define BPF iterator "getter" kfunc, which accepts iterator pointer as
one of the arguments. Make sure that argument passed doesn't have to be
the very first argument (unlike new-next-destroy combo).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The function "scheduler_tick" was renamed to "sched_tick" and a selftest
that used that function for testing function trace filtering used that
function as part of the test.
But the change causes it to fail when run on older kernels. As tests
should not fail on older kernels, add a check to see which name is
available before testing.
Fixes: 86dd6c04ef ("sched/balancing: Rename scheduler_tick() => sched_tick()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make timespec pointers, pointers to const in checklist function. As a
consequence, make list parameter in checklist function pointer to const
as well. Const-correctness increases readability.
Improvement was found by running cppcheck tool on the patched file as
follows:
```
cppcheck --enable=all \
tools/testing/selftests/timers/threadtest.c \
--suppress=missingIncludeSystem \
--suppress=unusedFunction
```
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This case was not covered, and the wrong ID was set before the previous
commit.
The rest is not modified, it is just that it will increase the code
coverage.
The right address ID can be verified by looking at the packet traces. We
could automate that using Netfilter with some cBPF code for example, but
that's always a bit cryptic. Packetdrill seems better fitted for that.
Fixes: 4f49d63352 ("selftests: mptcp: add fullmesh testcases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After having flushed endpoints that didn't cause the creation of new
subflows, it is important to check endpoints can be re-created, re-using
previously used IDs.
Before the previous commit, the client would not have been able to
re-create the subflow that was previously rejected.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-6-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test extends "delete and re-add" to validate the previous commit. A
new 'subflow' endpoint is added, but the subflow request will be
rejected. The result is that no subflow will be established from this
address.
Later, the endpoint is removed and re-added after having cleared the
firewall rule. Before the previous commit, the client would not have
been able to create this new subflow.
While at it, extra checks have been added to validate the expected
numbers of MPJ and RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-4-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test extends "delete re-add signal" to validate the previous
commit. An extra address is announced by the server, but this address
cannot be used by the client. The result is that no subflow will be
established to this address.
Later, the server will delete this extra endpoint, and set a new one,
with a valid address, but re-using the same ID. Before the previous
commit, the server would not have been able to announce this new
address.
While at it, extra checks have been added to validate the expected
numbers of MPJ, ADD_ADDR and RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-2-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looking at timestamped output of netdev CI reveals that
most of the time in forwarding tests for custom route
hashing is spent on a single case, namely the test which
uses ping (mausezahn does not support flow labels).
On a non-debug kernel we spend 714 of 730 total test
runtime (97%) on this test case. While having flow label
support in a traffic gen tool / mausezahn would be best,
we can significantly speed up the loop by putting ip vrf exec
outside of the iteration.
In a test of 1000 pings using a normal loop takes 50 seconds
to finish. While using:
ip vrf exec $vrf sh -c "$loop-body"
takes 12 seconds (1/4 of the time).
Some of the slowness is likely due to our inefficient virtualization
setup, but even on my laptop running "ip link help" 16k times takes
25-30 seconds, so I think it's worth optimizing even for fastest
setups.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240817203659.712085-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Check dport for RCH topology before accessing pci_host_bridge
= Skip unnecessary dport setup for cxl-test to fix KASAN warning
-----BEGIN PGP SIGNATURE-----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=X26j
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
"Check for RCH dport before accessing pci_host_bridge and a fix to
address a KASAN warning for the cxl regression test suite cxl-test"
* tag 'cxl-fixes-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Skip cxl_setup_parent_dport() for emulated dports
cxl/pci: Get AER capability address from RCRB only for RCH dport
Integrity Policy Enforcement (IPE) is an LSM that provides an
complimentary approach to Mandatory Access Control than existing LSMs
today.
Existing LSMs have centered around the concept of access to a resource
should be controlled by the current user's credentials. IPE's approach,
is that access to a resource should be controlled by the system's trust
of a current resource.
The basis of this approach is defining a global policy to specify which
resource can be trusted.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rewrite function to have (unneeded) socket descriptors automatically
close()d when leaving the scope. Make sure the "ownership" of fds is
correctly passed via take_fd(); i.e. descriptor returned to caller will
remain valid.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-6-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Constants got switched reducing the test's coverage. Replace SOCK_DGRAM
with SOCK_STREAM in one of unix_inet_skb_redir_to_connected() tests.
Fixes: 51354f700d ("bpf, sockmap: Add af_unix test with both sockets in map")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-5-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Do actually test the sotype as specified by the caller.
This picks up after commit 75e0e27db6 ("selftest/bpf: Change udp to inet
in some function names").
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-4-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Replace implementation with a call to a generic function.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-3-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Following create_pair() changes, remove unused function argument in
create_socket_pairs() and adapt its callers, i.e. drop the open-coded
loopback socket creation.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-2-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the function to allow creating socket pairs of SOCK_STREAM,
SOCK_DGRAM and SOCK_SEQPACKET.
Adapt direct callers and leave further cleanups for the following patch.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-1-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
GCC errors when compiling tailcall_bpf2bpf_hierarchy2.c and
tailcall_bpf2bpf_hierarchy3.c with the following error:
progs/tailcall_bpf2bpf_hierarchy2.c: In function 'tailcall_bpf2bpf_hierarchy_2':
progs/tailcall_bpf2bpf_hierarchy2.c:66:9: error: input operand constraint contains '+'
66 | asm volatile (""::"r+"(ret));
| ^~~
Changed implementation to make use of __sink macro that abstracts the
desired behaviour.
The proposed change seems valid for both GCC and CLANG.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-4-cupertino.miranda@oracle.com
verfifier_nocsr.c fails to compile in GCC. The reason behind it was
initially explained in commit 27a90b14b9.
"A few BPF selftests perform type punning and they may break strict
aliasing rules, which are exploited by both GCC and clang by default
while optimizing. This can lead to broken compiled programs."
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-2-cupertino.miranda@oracle.com
Test that nfqueue with and without GSO process SCTP packets correctly.
Joint work with Florian and Pablo.
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
After commit d7db7775ea ("net: veth: do not manipulate GRO when using
XDP"), there is no need to load XDP program to enable GRO. On the other
hand, the current test is failed due to loading the XDP program. e.g.
# selftests: net: udpgro.sh
# ipv4
# no GRO ok
# no GRO chk cmsg ok
# GRO ./udpgso_bench_rx: recv: bad packet len, got 1472, expected 14720
#
# failed
[...]
# bad GRO lookup ok
# multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# failed
ok 1 selftests: net: udpgro.sh
After fix, all the test passed.
# ./udpgro.sh
ipv4
no GRO ok
[...]
multiple GRO socks ok
Fixes: d7db7775ea ("net: veth: do not manipulate GRO when using XDP")
Reported-by: Yi Chen <yiche@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-53858
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we only check the latest senders's exit code. If the receiver
report failed, it is not recoreded. Fix it by checking the exit code
of all the involved processes.
Before:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
0
After:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
1
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add functions to simply print some basic state information in selftests.
The output can be enabled by setting:
#define TH_LOG_ENABLED 1
#define DEBUG 1
* print_psw: current SIE state description and VM run state
* print_hex_bytes: print memory with some counting markers
* print_hex: PRINT_HEX with 512 bytes
* print_run: use print_psw and print_hex to print contents of VM run
state and SIE state description
* print_regs: print content of general and control registers
All prints use pr_debug for the output and can be configured using
DEBUG.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-6-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-6-schlameuss@linux.ibm.com>
Add a uc_kvm fixture to create and destroy a ucontrol VM.
* uc_sie_assertions asserts basic settings in the SIE as setup by the
kernel.
* uc_attr_mem_limit asserts the memory limit is max value and cannot be
set (not supported).
* uc_no_dirty_log asserts dirty log is not supported.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-5-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-5-schlameuss@linux.ibm.com>
Add test suite to validate the s390x architecture specific ucontrol KVM
interface.
Make use of the selftest test harness.
* uc_cap_hpage testcase verifies that a ucontrol VM cannot be run with
hugepages.
To allow testing of the ucontrol interface the kernel needs a
non-default config containing CONFIG_KVM_S390_UCONTROL.
This config needs to be set to built-in (y) as this cannot be built as
module.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-4-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-4-schlameuss@linux.ibm.com>
Subsequent tests do require direct manipulation of the SIE control
block. This commit introduces the SIE control block definition for use
within the selftests.
There are already definitions of this within the kernel.
This differs in two ways.
* This is the first definition of this in userspace.
* In the context of the selftests this does not require atomicity for
the flags.
With the userspace definition of the SIE block layout now being present
we can reuse the values in other tests where applicable.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-3-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-3-schlameuss@linux.ibm.com>
Multiple test cases need page size and shift definitions.
By moving the definitions to a single architecture specific header we
limit the repetition.
Make use of PAGE_SIZE, PAGE_SHIFT and PAGE_MASK defines in existing
code.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-2-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-2-schlameuss@linux.ibm.com>
Add a test for the new functionality of userspace-driven timers and the
tool which allows us to count timer ticks in a certain time period. The
test:
1. Creates a userspace-driven timer with ioctl to /dev/snd/timer
2. Starts the `global-timer` application to count the ticks of the timer
from step 1.
3. Asynchronously triggers the timer multiple times with some interval
4. Compares the amount of caught ticks with the amount of trigger calls.
Since we can't include <alsa/asoundlib.h> and <sound/asound.h> in one
file due to overlapping declarations, I have to split the test into two
applications: one of them counts the amount of timer ticks in the
defined time period, and another one is the actual test which creates
the timer, triggers it periodically and starts the first app to count
the amount of ticks in a separate thread.
Besides from testing the functionality itself, the test represents a
sample application showing userspace-driven ALSA timers API.
Also, the timer test includes a test case which tries to create a timer
with invalid resolution (=0), and NULL as a timer info structure.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-5-ivan.orlov0322@gmail.com
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the place,
no identifiable-by-me theme. Please see the lovingly curated changelogs
to get the skinny.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZsFf8wAKCRDdBJ7gKXxA
jvEUAP97y/sqKD8rQNc0R8fRGSPNPamwyok8RHwohb0JEHovlAD9HsQ9Ad57EpqR
wBexMxJRFc7Dt73Tu6IkLQ1iNGqABAc=
=8KNp
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
Since commit 255c1c7279 ("tc-testing: Allow test cases to be skipped")
the variable test_ordinal doesn't exist in call_pre_case().
So it should not be accessed when an exception occurs.
This resolves the following splat:
...
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File ".../tdc.py", line 1028, in <module>
main()
File ".../tdc.py", line 1022, in main
set_operation_mode(pm, parser, args, remaining)
File ".../tdc.py", line 966, in set_operation_mode
catresults = test_runner_serial(pm, args, alltests)
File ".../tdc.py", line 642, in test_runner_serial
(index, tsr) = test_runner(pm, args, alltests)
File ".../tdc.py", line 536, in test_runner
res = run_one_test(pm, args, index, tidx)
File ".../tdc.py", line 419, in run_one_test
pm.call_pre_case(tidx)
File ".../tdc.py", line 146, in call_pre_case
print('test_ordinal is {}'.format(test_ordinal))
NameError: name 'test_ordinal' is not defined
Fixes: 255c1c7279 ("tc-testing: Allow test cases to be skipped")
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TOS value reaches the FIB rule core via different call paths when an
input route is looked up compared to an output route.
Re-test TOS matching with input routes to exercise these code paths.
Pass the 'iif' and 'from' selectors separately from the 'get{,no}match'
variables as otherwise the test name is too long to be printed without
misalignments.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240814111005.955359-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fib_rule{4,6}_connect tests verify that locally generated traffic
from a socket that specifies a DS Field using the IP_TOS / IPV6_TCLASS
socket options is correctly redirected using a FIB rule that matches on
the given DS Field.
Add negative tests to verify that the FIB rule is not hit when the
socket specifies a DS Field that differs from the one used by the FIB
rule.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240814111005.955359-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fib_rule{4,6} tests verify the behavior of a given FIB rule selector
(e.g., dport, sport) by redirecting to a routing table with a default
route using a FIB rule with the given selector and checking that a route
lookup using the selector matches this default route.
Add negative tests to verify that a FIB rule is not hit when it should
not.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240814111005.955359-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clarify the test results by grouping the output of test cases belonging
to the same test under a common title. This is consistent with the
output of fib_tests.sh.
Before:
# ./fib_rule_tests.sh
TEST: rule6 check: oif redirect to table [ OK ]
TEST: rule6 del by pref: oif redirect to table [ OK ]
[...]
TEST: rule4 check: oif redirect to table [ OK ]
TEST: rule4 del by pref: oif redirect to table [ OK ]
[...]
Tests passed: 116
Tests failed: 0
After:
# ./fib_rule_tests.sh
IPv6 FIB rule tests
TEST: rule6 check: oif redirect to table [ OK ]
TEST: rule6 del by pref: oif redirect to table [ OK ]
[...]
IPv4 FIB rule tests
TEST: rule4 check: oif redirect to table [ OK ]
TEST: rule4 del by pref: oif redirect to table [ OK ]
[...]
Tests passed: 116
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240814111005.955359-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge VLAN implementation w.r.t. VLAN protocol is described in
merge commit 1a0b20b257 ("Merge branch 'bridge-next'"). We are only
sensitive to those VLAN tags whose TPID is equal to the bridge's
vlan_protocol. Thus, an 802.1ad VLAN should be treated as 802.1Q-untagged.
Add 3 tests which validate that:
- 802.1ad-tagged traffic is learned into the PVID of an 802.1Q-aware
bridge
- Double-tagged traffic is forwarded when just the PVID of the port is
present in the VLAN group of the ports
- Double-tagged traffic is not forwarded when the PVID of the port is
absent from the VLAN group of the ports
The test passes with both veth and ocelot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A breakage in the felix DSA driver shows we do not have enough test
coverage. More generally, it is sufficiently special that it is likely
drivers will treat it differently.
This is not meant to be a full PTP test, it just makes sure that PTP
packets sent to the different addresses corresponding to their profiles
are received correctly. The local_termination selftest seemed like the
most appropriate place for this addition.
PTP RX/TX in some cases makes no sense (over a bridge) and this is why
$skip_ptp exists. And in others - PTP over a bridge port - the IP stack
needs convincing through the available bridge netfilter hooks to leave
the PTP packets alone and not stolen by the bridge rx_handler. It is
safe to assume that users have that figured out already. This is a
driver level test, and by using tcpdump, all that extra setup is out of
scope here.
send_non_ip() was an unfinished idea; written but never used.
Replace it with a more generic send_raw(), and send 3 PTP packet types
times 3 transports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xfail_on_veth() for this test is an incorrect approximation which gives
false positives and false negatives.
When local_termination fails with "reception succeeded, but should have failed",
it is because the DUT ($h2) accepts packets even when not configured as
promiscuous. This is not something specific to veth; even the bridge
behaves that way, but this is not captured by the xfail_on_veth test.
The IFF_UNICAST_FLT flag is not explicitly exported to user space, but
it can somewhat be determined from the interface's behavior. We have to
create a macvlan upper with a different MAC address. This forces a
dev_uc_add() call in the kernel. When the unicast filtering list is
not empty, but the device doesn't support IFF_UNICAST_FLT,
__dev_set_rx_mode() force-enables promiscuity on the interface, to
ensure correct behavior (that the requested address is received).
We can monitor the change in the promiscuity flag and infer from it
whether the device supports unicast filtering.
There is no equivalent thing for allmulti, unfortunately. We never know
what's hiding behind a device which has allmulti=off. Whether it will
actually perform RX multicast filtering of unknown traffic is a strong
"maybe". The bridge driver, for example, completely ignores the flag.
We'll have to keep the xfail behavior, but instead of XFAIL on just
veth, always XFAIL.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add more coverage to the local termination selftest as follows:
- 8021q upper of $h2
- 8021q upper of $h2, where $h2 is a port of a VLAN-unaware bridge
- 8021q upper of $h2, where $h2 is a port of a VLAN-aware bridge
- 8021q upper of VLAN-unaware br0, which is the upper of $h2
- 8021q upper of VLAN-aware br0, which is the upper of $h2
Especially the cases with traffic sent through the VLAN upper of a
VLAN-aware bridge port will be immediately relevant when we will start
transmitting PTP packets as an additional kind of traffic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current bridge() test is for packet reception on a VLAN-unaware
bridge. Some things are different enough with VLAN-aware bridges that
it's worth renaming this test into vlan_unaware_bridge(), and add a new
vlan_aware_bridge() test.
The two will share the same implementation: bridge() becomes a common
function, which receives $vlan_filtering as an argument. Rename it to
test_bridge() at the same time, because just bridge() pollutes the
global namespace and we cannot invoke the binary with the same name from
the iproute2 package currently.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are upcoming tests which verify the RX filtering of a bridge
(or bridge port), but under differing vlan_filtering conditions.
Since we currently print $h2 (the DUT) in the log_test() output, it
becomes necessary to make a further distinction between tests, to not
give the user the impression that the exact same thing is run twice.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In future changes we will want to subject the DUT, $h2, to additional
VLAN-tagged traffic. For that, we need to run the tests using $h1.100 as
a sending interface, rather than the currently hardcoded $h1.
Add a parameter to run_test() and modify its 2 callers to explicitly
pass $h1, as was implicit before.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used in other subtests as well; make new macvlan_create()
and macvlan_destroy() functions.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[1] mentions that memfd_secret is only supported on arm64, riscv, x86 and
x86_64 for now. It doesn't support other architectures. I found the
build error on arm and decided to send the fix as it was creating noise on
KernelCI:
memfd_secret.c: In function 'memfd_secret':
memfd_secret.c:42:24: error: '__NR_memfd_secret' undeclared (first use in this function);
did you mean 'memfd_secret'?
42 | return syscall(__NR_memfd_secret, flags);
| ^~~~~~~~~~~~~~~~~
| memfd_secret
Hence I'm adding condition that memfd_secret should only be compiled on
supported architectures.
Also check in run_vmtests script if memfd_secret binary is present before
executing it.
Link: https://lkml.kernel.org/r/20240812061522.1933054-1-usama.anjum@collabora.com
Link: https://lore.kernel.org/all/20210518072034.31572-7-rppt@kernel.org/ [1]
Link: https://lkml.kernel.org/r/20240809075642.403247-1-usama.anjum@collabora.com
Fixes: 76fe17ef58 ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "initial_nr_hugepages" variable is unsigned long so it takes up to 20
characters to print, plus 1 more character for the NUL terminator.
Unfortunately, this buffer is not quite large enough for the terminator to
fit. Also use snprintf() for a belt and suspenders approach.
Link: https://lkml.kernel.org/r/87470c06-b45a-4e83-92ff-aac2e7b9c6ba@stanley.mountain
Fixes: fb9293b6b0 ("selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The word 'expected' was spelled as 'exepcted'.
Fixed the typo in this patch.
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240814173121.33590-1-abhashkumarjha123@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable traffic monitoring for the subtests of select_reuseport.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-7-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Enable traffic monitor for each subtest of sockmap_listen.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-6-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Enable traffic monitoring for the test case tc_redirect.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-5-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
netns_new()/netns_free() create/delete network namespaces. They support the
option '-m' of test_progs to start/stop traffic monitor for the network
namespace being created for matched tests.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add option '-m' to test_progs to accept names and patterns of test cases.
This option will be used later to enable traffic monitor that capture
network packets generated by test cases.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add functions that capture packets and print log in the background. They
are supposed to be used for debugging flaky network test cases. A monitored
test case should call traffic_monitor_start() to start a thread to capture
packets in the background for a given namespace and call
traffic_monitor_stop() to stop capturing. (Or, option '-m' implemented by
the later patches.)
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 68, SYN
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 60, SYN, ACK
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 60, ACK
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 52, ACK
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 52, FIN, ACK
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 52, RST, ACK
Packet file: packets-2173-86-select_reuseport:sockhash_IPv4_TCP_LOOPBACK_test_detach_bpf-test.log
#280/87 select_reuseport/sockhash IPv4/TCP LOOPBACK test_detach_bpf:OK
The above is the output of an example. It shows the packets of a connection
and the name of the file that contains captured packets in the directory
/tmp/tmon_pcap. The file can be loaded by tcpdump or wireshark.
This feature only works if libpcap is available. (Could be found by pkg-config)
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Current release - regressions:
- udp: fall back to software USO if IPv6 extension headers are present
- wifi: iwlwifi: correctly lookup DMA address in SG table
Current release - new code bugs:
- eth: mlx5e: fix queue stats access to non-existing channels splat
Previous releases - regressions:
- eth: mlx5e: take state lock during tx timeout reporter
- eth: mlxbf_gige: disable RX filters until RX path initialized
- eth: igc: fix reset adapter logics when tx mode change
Previous releases - always broken:
- tcp: update window clamping condition
- netfilter:
- nf_queue: drop packets with cloned unconfirmed conntracks
- nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
- vsock: fix recursive ->recvmsg calls
- dsa: vsc73xx: fix MDIO bus access and PHY opera
- eth: gtp: pull network headers in gtp_dev_xmit()
- eth: igc: fix packet still tx after gate close by reducing i226 MAC retry buffer
- eth: mana: fix RX buf alloc_size alignment and atomic op panic
- eth: hns3: fix a deadlock problem when config TC during resetting
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=o4nr
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter
Current release - regressions:
- udp: fall back to software USO if IPv6 extension headers are
present
- wifi: iwlwifi: correctly lookup DMA address in SG table
Current release - new code bugs:
- eth: mlx5e: fix queue stats access to non-existing channels splat
Previous releases - regressions:
- eth: mlx5e: take state lock during tx timeout reporter
- eth: mlxbf_gige: disable RX filters until RX path initialized
- eth: igc: fix reset adapter logics when tx mode change
Previous releases - always broken:
- tcp: update window clamping condition
- netfilter:
- nf_queue: drop packets with cloned unconfirmed conntracks
- nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
- vsock: fix recursive ->recvmsg calls
- dsa: vsc73xx: fix MDIO bus access and PHY opera
- eth: gtp: pull network headers in gtp_dev_xmit()
- eth: igc: fix packet still tx after gate close by reducing i226 MAC
retry buffer
- eth: mana: fix RX buf alloc_size alignment and atomic op panic
- eth: hns3: fix a deadlock problem when config TC during resetting"
* tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: hns3: use correct release function during uninitialization
net: hns3: void array out of bound when loop tnl_num
net: hns3: fix a deadlock problem when config TC during resetting
net: hns3: use the user's cfg after reset
net: hns3: fix wrong use of semaphore up
selftests: net: lib: kill PIDs before del netns
pse-core: Conditionally set current limit during PI regulator registration
net: thunder_bgx: Fix netdev structure allocation
net: ethtool: Allow write mechanism of LPL and both LPL and EPL
vsock: fix recursive ->recvmsg calls
selftest: af_unix: Fix kselftest compilation warnings
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
tcp: Update window clamping condition
...
-----BEGIN PGP SIGNATURE-----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=H17I
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Ignores ifindex for types other than mcast/linklocal in ipv6 frag
reasm, from Tom Hughes.
2) Initialize extack for begin/end netlink message marker in batch,
from Donald Hunter.
3) Initialize extack for flowtable offload support, also from Donald.
4) Dropped packets with cloned unconfirmed conntracks in nfqueue,
later it should be possible to explore lookup after reinject but
Florian prefers this approach at this stage. From Florian Westphal.
5) Add selftest for cloned unconfirmed conntracks in nfqueue for
previous update.
6) Audit after filling netlink header successfully in object dump,
from Phil Sutter.
7-8) Fix concurrent dump and reset which could result in underflow
counter / quota objects.
netfilter pull request 24-08-15
* tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
====================
Link: https://patch.msgid.link/20240814222042.150590-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When deleting netns, it is possible to still have some tasks running,
e.g. background tasks like tcpdump running in the background, not
stopped because the test has been interrupted.
Before deleting the netns, it is then safer to kill all attached PIDs,
if any. That should reduce some noises after the end of some tests, and
help with the debugging of some issues. That's why this modification is
seen as a "fix".
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240813-upstream-net-20240813-selftests-net-lib-kill-v1-1-27b689b248b8@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change expected_buf from (const void *) to (const char *)
in function __recvpair().
This change fixes the below warnings during test compilation:
```
In file included from msg_oob.c:14:
msg_oob.c: In function ‘__recvpair’:
../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]
../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’
../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]
../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’
```
Fixes: d098d77232 ("selftest: af_unix: Add msg_oob.c.")
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240814080743.1156166-1-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
test_skb_cgroup_id_user allows testing skb cgroup id retrieval at different
levels, but is not integrated in test_progs, so it is not run
automatically in CI. The test overlaps a bit with
cgroup_skb_sk_lookup_kern, which is integrated in test_progs and test
extensively skb cgroup helpers, but there is still one major difference
between the two tests which justifies the conversion:
cgroup_skb_sk_lookup_kern deals with a BPF_PROG_TYPE_CGROUP_SKB (attached
on a cgroup), while test_skb_cgroup_id_user deals with a
BPF_PROG_TYPE_SCHED_CLS (attached on a qdisc)
Convert test_skb_cgroup_id_user into test_progs framework in order to run
it automatically in CI. The main differences with the original test are the
following:
- rename the test to make it shorter and more straightforward regarding
tested feature
- the wrapping shell script has been dropped since every setup step is now
handled in the main C test file
- the test has been renamed for a shorter name and reflecting the tested
API
- add dedicated assert log per level to ease test failure debugging
- use global variables instead of maps to access bpf prog data
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-4-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_skb_cgroup_id_kern.c is currently involved in a manual test. In its
current form, it can not be used with the auto-generated skeleton APIs,
because the section name is not valid to allow libbpf to deduce the program
type.
Update section name to allow skeleton APIs usage. Also rename the program
name to make it shorter and more straighforward regarding the API it is
testing. While doing so, make sure that test_skb_cgroup_id.sh passes to get
a working reference before converting it to test_progs
- update the obj name
- fix loading issue (verifier rejecting the program when loaded through tc,
because of map not found), by preloading the whole obj with bpftool
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-3-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_cgroup_storage is currently a standalone program which is not run
when executing test_progs.
Convert it to the test_progs framework so it can be automatically executed
in CI. The conversion led to the following changes:
- converted the raw bpf program in the userspace test file into a dedicated
test program in progs/ dir
- reduced the scope of cgroup_storage test: the content from this test
overlaps with some other tests already present in test_progs, most
notably netcnt and cgroup_storage_multi*. Those tests already check
extensively local storage, per-cpu local storage, cgroups interaction,
etc. So the new test only keep the part testing that the program return
code (based on map content) properly leads to packet being passed or
dropped.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-2-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
get_current_cgroup_id_user allows testing for bpf_get_current_cgroup_id()
bpf API but is not integrated into test_progs, and so is not tested
automatically in CI.
Convert it to the test_progs framework to allow running it automatically.
The most notable differences with the old test are the following:
- the new test relies on autoattach instead of manually hooking/enabling
the targeted tracepoint through perf_event, which reduces quite a lot the
test code size
- it also accesses bpf prog data through global variables instead of maps
- sleep duration passed to nanosleep syscall has been reduced to its
minimum to not impact overall CI duration (we only care about the syscall
being properly triggered, not about the passed duration)
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-1-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Trigger cloned skbs leaving softirq protection.
This triggers splat without the preceeding change
("netfilter: nf_queue: drop packets with cloned unconfirmed
conntracks"):
WARNING: at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm..
because local delivery and forwarding will race for confirmation.
Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* Fix failure to start guests with kvm.use_gisa=0
* Panic if (un)share fails to maintain security.
ARM:
* Use kvfree() for the kvmalloc'd nested MMUs array
* Set of fixes to address warnings in W=1 builds
* Make KVM depend on assembler support for ARMv8.4
* Fix for vgic-debug interface for VMs without LPIs
* Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
* Minor code / comment cleanups for configuring PAuth traps
* Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
x86:
* Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
* Fix smatch issues
* Small cleanups
* Make x2APIC ID 100% readonly
* Fix typo in uapi constant
Generic:
* Use synchronize_srcu_expedited() on irqfd shutdown
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAma85nQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPq5gf8DVZjs2yNwdPLAUN7AOpElsobFnVN
etJ1V09XsfSYMIAV6ksvC1VBzHpyOJN2QKuF0nfIiISsV8W9xLcV2rKIodsGBvdV
K5ODL/yxeYI27t6Uferra1AGlchtn3tlpZzVarZIgRvZa3NMXaQPYJdcQr2Oybou
7hZsboMTl6jaSl6NELzcBRksfkcOqQLQoUqVBqlkBTM3yyFRmV85BisRkOWCIBfA
9c+kn7ZWBfOqYaXjiLeCrdCKrUuFLfR3ejJibYFan5MULYHIL95W/WJo9uQJ1QBr
BNjMfmtVZ2JOWya40uUSKrvxJ0IErAlMNgmnpjeA4cBqYK5GRHUKvO5jNw==
=A8SH
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"s390:
- Fix failure to start guests with kvm.use_gisa=0
- Panic if (un)share fails to maintain security.
ARM:
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
x86:
- Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
- Fix smatch issues
- Small cleanups
- Make x2APIC ID 100% readonly
- Fix typo in uapi constant
Generic:
- Use synchronize_srcu_expedited() on irqfd shutdown"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: SEV: uapi: fix typo in SEV_RET_INVALID_CONFIG
KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
KVM: eventfd: Use synchronize_srcu_expedited() on shutdown
KVM: selftests: Add a testcase to verify x2APIC is fully readonly
KVM: x86: Make x2APIC ID 100% readonly
KVM: x86: Use this_cpu_ptr() instead of per_cpu_ptr(smp_processor_id())
KVM: x86: hyper-v: Remove unused inline function kvm_hv_free_pa_page()
KVM: SVM: Fix an error code in sev_gmem_post_populate()
KVM: SVM: Fix uninitialized variable bug
KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
KVM: arm64: Tidying up PAuth code in KVM
KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
s390/uv: Panic for set and remove shared access UVC errors
KVM: s390: fix validity interception issue when gisa is switched off
docs: KVM: Fix register ID of SPSR_FIQ
KVM: arm64: vgic: fix unexpected unlock sparse warnings
KVM: arm64: fix kdoc warnings in W=1 builds
KVM: arm64: fix override-init warnings in W=1 builds
...
Add a new user option to memslot_perf_test to allow testing memslot move
with quirk KVM_X86_QUIRK_SLOT_ZAP_ALL disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021219.13939-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new user option to memslot_modification_stress_test to allow testing
with slot zap quirk KVM_X86_QUIRK_SLOT_ZAP_ALL disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021206.13923-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update set_memory_region_test to make sure memslot move and deletion
function correctly both when slot zap quirk KVM_X86_QUIRK_SLOT_ZAP_ALL is
enabled and disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021119.13904-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kprobe_args_{char,string}.tc are using available_filter_functions file
which is provided by function tracer. Thus if function tracer is disabled,
these tests are failed on recent kernels because tracefs_create_dir is
not raised events by adding a dynamic event.
Add available_filter_functions to requires line.
Fixes: 7c1130ea5c ("test: ftrace: Fix kprobe test for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This commit adds a TINY scenario in order to support tests of Tiny RCU
and Tiny SRCU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Some servers have limitations on the number of CPUs a given guest OS
can use. In my earlier experience, such limitations have been at least
half of the host's CPUs, but in a recent example, this limit is less
than 40%. This commit therefore adds a --guest-cpu-limit argument that
allows such low limits to be made known to torture.sh.
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
On little-endian systems, doing subtraction after htons()
leads to interesting results:
Given:
MAGIC_BYTES = 123 = 0x007B aka. in big endian: 0x7B00 = 31488
sizeof(struct iphdr) = 20
Before this patch:
__bpf_constant_htons(MAGIC_BYTES) - sizeof(struct iphdr) = 0x7AEC
0x7AEC = htons(0xEC7A) = htons(60538)
So these were outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 60538 bytes.
After this patch:
__bpf_constant_htons(MAGIC_BYTES - sizeof(struct iphdr)) = htons(103)
Now these packets are outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 103 bytes.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://lore.kernel.org/r/20240808075906.1849564-1-ast@fiberby.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a test to verify that userspace can't change a vCPU's x2APIC ID by
abusing KVM_SET_LAPIC. KVM models the x2APIC ID (and x2APIC LDR) as
readonly, and silently ignores userspace attempts to change the x2APIC ID
for backwards compatibility.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: write changelog, add to existing test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240802202941.344889-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZrVPUBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFoCrAP9ZGQ1M7GdCe4Orm6Ex4R4OMVcz
MWMrFCVM73rnSoCbMwEA7le7M8c+X5i/4oqFOPm/fEr1i5RZT512RL5lc7MxBQ8=
=DG57
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.11, round #1
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
A selftest is added such that without the previous patch,
a crash can happen. With the previous patch, the test can
run successfully. The new test is written in a way which
mimics original crash case:
main_prog
static_prog_1
static_prog_2
where static_prog_1 has different paths to static_prog_2
and some path has stack allocated and some other path
does not. A stacksafe() checking in static_prog_2()
triggered the crash.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240812214852.214037-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests that exercise full 16 bits of NH weight.
Like in the previous patch, omit the 255:65535 test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/a91d6ead9d1b1b4b7e276ca58a71ef814f42b7dd.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests that exercise full 16 bits of NH weight.
To test the 255:65535, it is necessary to run more packets than for the
other tests. On a debug kernel, the test can take up to a minute, therefore
avoid the test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c0c257c00ad30b07afc3fa5e2afd135925405544.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the context of an offloaded datapath, it may take a while for the ip
link stats to be updated. This causes the test to fail when MZ_DELAY is too
low. Sleep after the packets are sent for the link stats to get up to date.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/8b1971d948273afd7de2da3d6a2ba35200540e55.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The target names between GCC and clang differ for s390.
While GCC uses "s390", clang uses "systemz".
This mapping is not handled by tools/scripts/Makefile.include,
so do it in the nolibc-test Makefile.
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-14-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The logic in clang to find the libgcc.a from a GCC toolchain for a
specific ABI does not work reliably and can lead to errors.
Instead disable libgcc when building with clang, as it's not needed
anyways.
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-13-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The cc-option macro from Build.include is not compatible with clang
cross builds, as it does not respect the "--target" and similar flags,
set up by Mekfile.include.
Provide a custom variant which works correctly.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-11-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Makefile.include can modify CC and CFLAGS for usage with clang.
Make use of it.
Makefile.include is currently used to handle the O= variable.
This is incompatible with the LLVM= handling as for O= it has to be
included as early as possible, while for LLVM= it needs to be included
after CFLAGS are set up.
To avoid this incompatibility, switch the O= handling to custom logic.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-10-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The nolibc-test Makefile includes various other Makefiles from the tree.
At first these are included with relative paths like
"../../../build/Build.include" but as soon as $(srctree) is set up,
the inclusions use that instead to build full paths.
To keep the style of inclusions consistent, perform the setup
$(srctree) as early as possible and use it for all inclusions.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-9-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Clang on higher optimization levels detects that NULL is passed to
printf("%s") and warns about it.
While printf() from nolibc gracefully handles that NULL,
it is undefined behavior as per POSIX, so the warning is reasonable.
Avoid the warning by transforming NULL into a non-NULL placeholder.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-8-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZrFgeQAKCRBZ7Krx/gZQ
6w4SAP48jL+Vil7ifIXviasoBrQGzf9lbTcOAmWAoaxjSlvlpAEAw4OyPhJUmKHW
ykB/yqUMCajsrrTQPN5lmc0W5v0nqQ4=
=G0ms
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fd bitmap fix from Al Viro:
"Fix bitmap corruption on close_range() by cleaning up
copy_fd_bitmaps()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE
Add a test for dumping RSS contexts. Make sure indir table
and key are sane when contexts are created with various
combination of inputs. Test the dump filtering by ifname
and start-context.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include the "name" of the context in the comment for traffic
checks. Makes it easier to reason about which context failed
when we loop over 32 contexts (it may matter if we failed in
first vs last, for example).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_RUST depends on !CONFIG_GCC_PLUGINS. Disable CONFIG_GCC_PLUGINS
in rust/config file to make sure it doesn't get enabled.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If adding multiple config files to the merge_config.sh script and
rust/config is the fist one, then the last config fragment in this file
and the first config fragment in the second file won't be set, since
there isn't a newline in this file, so those two fragements end up at
the same row like:
CONFIG_SAMPLE_RUST_PRINT=mCONFIG_FRAGMENT=y
And non of those will be enabled when running 'olddefconfig' after.
Fixing the issue by adding a newline to the file.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After enabling UDP GSO for devices not offering checksum offload, we have
hit a regression where a bad offload warning can be triggered when sending
a datagram with IPv6 extension headers.
Extend the UDP GSO IPv6 tests to cover this scenario.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cxl_test unit test environment on qemu always hits below call trace
with KASAN enabled:
BUG: KASAN: slab-out-of-bounds in cxl_setup_parent_dport+0x480/0x530 [cxl_core]
Read of size 1 at addr ff110000676014f8 by task (udev-worker)/676[ 24.424403] CPU: 2 PID: 676 Comm: (udev-worker) Tainted: G O N 6.10.0-qemucxl #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20240214-2.el9 02/14/2024
Call Trace:
<TASK>
dump_stack_lvl+0xea/0x150
print_report+0xce/0x610
? kasan_complete_mode_report_info+0x40/0x200
kasan_report+0xcc/0x110
__asan_report_load1_noabort+0x18/0x20
cxl_setup_parent_dport+0x480/0x530 [cxl_core]
cxl_mem_probe+0x49b/0xaa0 [cxl_mem]
cxl_test module models a CXL topology for testing, it creates some
emulated dports with platform devices in the CXL topology, so the
dport_dev of an emulated dport points to a platform device rather than a
pci device or a pci host bridge in the case. Currently,
cxl_setup_parent_dport() is used to set up RAS and AER capability on the
dport connected to the CXL memory device, but cxl_test does not support
RAS or AER functionality yet, so the fix is implementing a
__wrap_cxl_setup_parent_dport() to filter out all emulated dports,
guarantees only real dports can be handled by cxl_setup_parent_dport().
Fixes: f05fd10d13 ("cxl/pci: Add RCH downstream port AER register discovery")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Closes: https://lore.kernel.org/linux-cxl/ZrHTBp2O+HtUe6kt@xpf.sh.intel.com/T/#t
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240809082750.3015641-3-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This adds some basic self-testing infrastructure for RDS-TCP.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests to set TCP sockopt TCP_BPF_SOCK_OPS_CB_FLAGS via
bpf_setsockopt() and use a cgroup/getsockopt program to retrieve
the value to verify it was set.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20240808150558.1035626-3-alan.maguire@oracle.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
on older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code
for max RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bKTC
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code for max
RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention"
* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
ethtool: Fix context creation with no parameters
net: ethtool: fix off-by-one error in max RSS context IDs
net: pse-pd: tps23881: include missing bitfield.h header
net: fec: Stop PPS on driver remove
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
l2tp: fix lockdep splat
net: stmmac: dwmac4: fix PCS duplex mode decode
idpf: fix UAFs when destroying the queues
idpf: fix memleak in vport interrupt configuration
idpf: fix memory leaks and crashes while performing a soft reset
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
net/smc: add the max value of fallback reason count
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
ice: Fix incorrect assigns of FEC counts
...
aren't considered necessary for earlier kernels. 5 are MM and 4 are
non-MM. No identifiable theme here - please see the individual changelogs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZrQhyAAKCRDdBJ7gKXxA
jvLLAP46sQ/HspAbx+5JoeKBTiX6XW4Hfd+MAk++EaTAyAhnxQD+Mfq7rPOIHm/G
wiXPVvLO8FEx0lbq06rnXvdotaWFrQg=
=mlE4
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes. Five are cc:stable, the others either pertain to
post-6.10 material or aren't considered necessary for earlier kernels.
Five are MM and four are non-MM. No identifiable theme here - please
see the individual changelogs"
* tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
mailmap: update entry for David Heidelberg
memcg: protect concurrent access to mem_cgroup_idr
mm: shmem: fix incorrect aligned index when checking conflicts
mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
mm: list_lru: fix UAF for memory cgroup
kcov: properly check for softirq context
MAINTAINERS: Update LTP members and web
selftests: mm: add s390 to ARCH check
commit 0518dbe97f ("selftests/mm: fix cross compilation with LLVM")
changed the env variable for the architecture from MACHINE to ARCH.
This is preventing 3 required TEST_GEN_FILES from being included when
cross compiling s390x and errors when trying to run the test suite. This
is due to the ARCH variable already being set and the arch folder name
being s390.
Add "s390" to the filtered list to cover this case and have the 3 files
included in the build.
Link: https://lkml.kernel.org/r/20240724213517.23918-1-npache@redhat.com
Fixes: 0518dbe97f ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A regression happened where running the ownership test passes on the first
iteration but fails running it a second time. This was caught and fixed,
but a later change brought it back. The regression was missed because the
automated tests only run the tests once per boot.
Change the ownership test to iterate through the tests twice, as this will
catch the regression with a single run.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The ID register for S1PIE is ID_AA64MMFR3_EL1.S1PIE which is bits 11:8 but
get-reg-list uses a shift of 4, checking SCTLRX instead. Use a shift of 8
instead.
Fixes: 5f0419a008 ("KVM: selftests: get-reg-list: add Permission Indirection registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240731-kvm-arm64-fix-s1pie-test-v1-1-a9253f3b7db4@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add test for bpf_get_dentry_xattr on hook security_inode_getxattr.
Verify that the kfunc can read the xattr. Also test failing getxattr
from user space by returning non-zero from the LSM bpf program.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240806230904.71194-4-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds the rcutree.nohz_full_patience_delay=1000 kernel boot
parameter to the TREE07 scenario, on the observation that "if it ain't
tested, it don't work".
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Now, __constructor_order is boolean; 1 for forward-order systems,
0 for backward-order systems while parsing __LIST_APPEND().
Change it into a bool variable, and rename it for clarification.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
__constructor_order_last() is unneeded.
If __constructor_order_last() is not called on backward-order systems,
__constructor_order will remain 0 instead of being set to
_CONSTRUCTOR_ORDER_BACKWARD (= -1).
__LIST_APPEND() will still take the 'else' branch, so there is no
difference in the behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a bunch of positive selftests which extensively cover the various
contexts and parameters in which the new VFS based BPF kfuncs may be
used from.
Again, the following VFS based BPF kfuncs are thoroughly tested within
this new selftest:
* struct file *bpf_get_task_exe_file(struct task_struct *);
* void bpf_put_file(struct file *);
* int bpf_path_d_path(struct path *, char *, size_t);
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240731110833.1834742-4-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a bunch of negative selftests responsible for asserting that the
BPF verifier successfully rejects a BPF program load when the
underlying BPF program misuses one of the newly introduced VFS based
BPF kfuncs.
The following VFS based BPF kfuncs are extensively tested within this
new selftest:
* struct file *bpf_get_task_exe_file(struct task_struct *);
* void bpf_put_file(struct file *);
* int bpf_path_d_path(struct path *, char *, size_t);
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240731110833.1834742-3-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 1e4c64b71c ("mm/memblock: Add "reserve_mem" to reserved named
memory at boot up") introduce usage of isspace().
Let's include <linux/ctype.h> in kernel.h to fix this.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240806010319.29194-4-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Commit 1e4c64b71c ("mm/memblock: Add "reserve_mem" to reserved named
memory at boot up") introduce the usage of memparse(), which is not
defined in memblock test.
Add the definition and link it to fix the build.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240806010319.29194-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Currently we have two test suits define its own init.h. This is a little
redundant.
Let's create a init.h in common include directory and merge these two
into it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/r/20240712035138.24674-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
In kernel code, linkage.h includes export.h. Let's sync with kernel.
This is a preparation for move init.h in common include directory.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240712035138.24674-2-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
In kernel code, memory_hotplug.h is included in mmzone.h instead of in
init.h. Let's sync with kernel.
This is a preparation for move init.h in common include directory.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240712035138.24674-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This kselftest fixes update consists of a single fix to the conditional
in ksft.py script which incorrectly flags a test suite failed when there
are skipped tests in the mix. The logic is fixed to take skipped tests
into account and report the test as passed.
-----BEGIN PGP SIGNATURE-----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=DeQe
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A single fix to the conditional in ksft.py script which incorrectly
flags a test suite failed when there are skipped tests in the mix.
The logic is fixed to take skipped tests into account and report the
test as passed"
* tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: ksft: Fix finished() helper exit code on skipped tests
Add new test cases to test_cpuset_prs.sh to cover corner cases reported
in previous fix commits.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Print more stack frames and the failing line when check fails.
This helps when tests use helpers to do the checks.
Before:
# At ./ksft/drivers/net/hw/rss_ctx.py line 92:
# Check failed 1037698 >= 396893.0 traffic on other queues:[344612, 462380, 233020, 449174, 342298]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
After:
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 387, in test_rss_context_queue_reconfigure:
# Check| test_rss_queue_reconfigure(cfg, main_ctx=False)
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 230, in test_rss_queue_reconfigure:
# Check| _send_traffic_check(cfg, port, ctx_ref, { 'target': (0, 3),
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 92, in _send_traffic_check:
# Check| ksft_lt(sum(cnts[i] for i in params['noise']), directed / 2,
# Check failed 1045235 >= 405823.5 traffic on other queues (context 1)':[460068, 351995, 565970, 351579, 127270]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
Link: https://patch.msgid.link/20240801232317.545577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr suggested to use errno.EOPNOTSUPP instead of hard-coded 95
in the new test case. Adjust existing ones to match this style.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new @ksft_disruptive decorator to mark the tests that might
be disruptive to the system. Depending on how well the previous
test works in the CI we might want to disable disruptive tests
by default and only let the developers run them manually.
KSFT framework runs disruptive tests by default. DISRUPTIVE=False
environment (or config file) can be used to disable these tests.
ksft_setup should be called by the test cases that want to use
new decorator (ksft_setup is only called via NetDrvEnv/NetDrvEpEnv for now).
In the future we can add similar decorators to, for example, avoid
running slow tests all the time. And/or have some option to run
only 'fast' tests for some sort of smoke test scenario.
$ DISRUPTIVE=False ./stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down # SKIP marked as disruptive
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:1 error:0
v3:
- parse yes and properly treat non-zero nums as true (Petr)
v2:
- convert from cli argument to env variable (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Verify that total device stats don't decrease after it has been turned down.
Also make sure the device doesn't crash when we access per-queue stats
when it's down (in case it tries to access some pointers that are NULL).
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
v3:
- use errno.EOPNOTSUPP (Petr)
- move qstat[0] under try (Petr)
v2:
- KTAP output formatting (Jakub)
- defer instead of try/finally (Jakub)
- disappearing stats is an error (Jakub)
- ksft_ge instead of open coding (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub reported bpf selftest "btf_dump" failure after forwarding to
v6.11-rc1 with netdev.
Error: #33 btf_dump
Error: #33/15 btf_dump/btf_dump: var_data
btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0
The reason for the failure is due to
commit 94ede2a3e9 ("profiling: remove stale percpu flip buffer variables")
where percpu static variable "cpu_profile_flip" is removed.
Let us replace "cpu_profile_flip" with a variable in bpf subsystem
so whenever that variable gets deleted or renamed, we can detect the
failure immediately. In this case, I picked a static percpu variable
"bpf_cgrp_storage_busy" which is defined in kernel/bpf/bpf_cgrp_storage.c.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240802185434.1749056-1-yonghong.song@linux.dev
confidential VMs
* fix "underline too short" in docs
* eliminate log spam from limited APIC timer periods
* disallow pre-faulting of memory before SEV-SNP VMs are initialized
* delay clearing and encrypting private memory until it is added to
guest page tables
* this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages
can now be moved in the common kvm_gmem_populate() function
* fix compilation error that the RISC-V merge introduced in selftests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmatCoMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMUmgf9FwuSypOyZeZM4DKpNoMdaDQGVBn2
nTUYDJdiggmUNWA5MenqKtZ5N7G79iDO5HNDOUGBXn33f78EimDxsSC+Xfy54RNF
SwEUZxQR/y81xOF2LIzfisWkNY+4Bf9fDALUbAlOj/O0E/YHDO9gk+ZNnvdHkWMe
72euiii1xlIV/+Snq7QQZU2UiUNalIfN0wCtPRYG9RGbG+yF2ksm01QU3aE8Q2uu
aSN3/DxfiFmKPEP5YQ1qXyntpQ8hA1WfONuUUhmgBgZlSdPS93nyL7y030QDzhgn
/JayovN14I3S73rLcepmw3Jx4vTltX1QJA+JqBoKBv/gXJQ8ZCqyLzqrvQ==
=ExK2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The bulk of the changes here is a largish change to guest_memfd,
delaying the clearing and encryption of guest-private pages until they
are actually added to guest page tables. This started as "let's make
it impossible to misuse the API" for SEV-SNP; but then it ballooned a
bit.
The new logic is generally simpler and more ready for hugepage support
in guest_memfd.
Summary:
- fix latent bug in how usage of large pages is determined for
confidential VMs
- fix "underline too short" in docs
- eliminate log spam from limited APIC timer periods
- disallow pre-faulting of memory before SEV-SNP VMs are initialized
- delay clearing and encrypting private memory until it is added to
guest page tables
- this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can
now be moved in the common kvm_gmem_populate() function
- fix compilation error that the RISC-V merge introduced in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
KVM: riscv: selftests: Fix compile error
KVM: guest_memfd: abstract how prepared folios are recorded
KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes()
KVM: guest_memfd: move check for already-populated page to common code
KVM: remove kvm_arch_gmem_prepare_needed()
KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm
KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest
KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn
KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_*
KVM: guest_memfd: do not go through struct page
KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation
KVM: guest_memfd: return folio from __kvm_gmem_get_pfn()
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM: Documentation: Fix title underline too short warning
KVM: x86: Eliminate log spam from limited APIC timer periods
These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be
on alpha.
-----BEGIN PGP SIGNATURE-----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=0iyr
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves
-----BEGIN PGP SIGNATURE-----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=mHpM
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly fixes. This is a bit larger than usual but doesn't seem
too crazy.
Most of it is vmwgfx changes that fix a bunch of issues with wayland
userspaces with dma-buf/external buffers and modesetting fixes.
Otherwise it's kinda spread out, v3d fixes some new ioctls, nouveau
has regression revert and fixes, amdgpu, i915 and ast have some small
fixes, and some core fixes spread about.
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves"
* tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
Revert "nouveau: rip out busy fence waits"
nouveau: set placement to original placement on uvmm validate.
drm/atomic: Allow userspace to use damage clips with async flips
drm/atomic: Allow userspace to use explicit sync with atomic async flips
drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()
drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro
drm/ast: astdp: Wake up during connector status detection
i915/perf: Remove code to update PWR_CLK_STATE for gen12
kselftests: dmabuf-heaps: Ensure the driver name is null-terminated
drm/client: Fix error code in drm_client_buffer_vmap_local()
drm/amdgpu: Fix APU handling in amdgpu_pm_load_smu_firmware()
drm/amdgpu: increase mes log buffer size for gfx12
drm/amdgpu: fix contiguous handling for IB parsing v2
drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3
drm/vmwgfx: Trigger a modeset when the screen moves
drm/vmwgfx: Fix overlay when using Screen Targets
drm/vmwgfx: Add basic support for external buffers
drm/vmwgfx: Fix handling of dumb buffers
drm/vmwgfx: Make sure the screen surface is ref counted
drm/vmwgfx: Fix a deadlock in dma buf fence polling
...
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df ("uprobe: Wire up uretprobe system call")
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a few new tests to exercise the signal handler flow, especially with
PKEY 0 disabled:
- Verify that the SIGSEGV handler is invoked when pkey 0 is disabled.
- Verify that a thread which disables PKEY 0 segfaults with PKUERR when
accessing the stack.
- Verify that the SIGSEGV handler that uses an alternate signal stack is
correctly invoked when the thread disabled PKEY 0
- Verify that the PKRU value set by the application is correctly restored
upon return from signal handling.
- Verify that sigreturn() is able to restore the altstack even if the
thread had PKEY 0 disabled
[ Aruna: Adapted to upstream ]
[ tglx: Made it actually compile. Restored protection_keys compile. Added
useful info to the changelog instead of bare function names. ]
Signed-off-by: Keith Lucas <keith.lucas@oracle.com>
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240802061318.2140081-6-aruna.ramakrishna@oracle.com
This way uprobe_unregister() and uprobe_apply() can use "struct uprobe *"
rather than inode + offset. This simplifies the code and allows to avoid
the unnecessary find_uprobe() + put_uprobe() in these functions.
TODO: uprobe_unregister() still needs get_uprobe/put_uprobe to ensure that
this uprobe can't be freed before up_write(&uprobe->register_rwsem).
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240801132734.GA8803@redhat.com
It doesn't make any sense to have 2 versions of _register(). Note that
trace_uprobe_enable(), the only user of uprobe_register(), doesn't need
to check tu->ref_ctr_offset to decide which one should be used, it could
safely pass ref_ctr_offset == 0 to uprobe_register_refctr().
Add this argument to uprobe_register(), update the callers, and kill
uprobe_register_refctr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240801132728.GA8800@redhat.com
Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET,
which use SIOCOUTQ ioctl to check that the number of unsent bytes is
zero after delivering a packet.
vsock_connect and vsock_accept are no longer static: this is to
create more generic tests, allowing code to be reused for SEQPACKET
and STREAM.
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The acct() system call enables or disables process accounting.
If accounting is turned on, records for each terminating process
are appended to a specified filename as it terminates. An argument of NULL
causes accounting to be turned off.
This patch will add a test for the acct() syscall.
Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The strscpy test loads test_strscpy module for testing. But test_strscpy
was converted to Kunit (see fixes). Hence remove strscpy.
Fixes: 41eefc46a3 ("string: Convert strscpy() self-test to KUnit")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The user test suite has only one test, test_user_copy which loads
test_user_copy module for testing. But test_user_copy module has already
been converted to kunit (see fixes). Hence remove the entire suite.
Fixes: cf6219ee88 ("usercopy: Convert test_user_copy to KUnit test")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current release - regressions:
- core: drop bad gso csum_start and offset in virtio_net_hdr
- wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove
- eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()
- phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and aqr115c
Current release - new code bugs:
- smc: prevent UAF in inet_create()
- bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend
- eth: bnxt: reject unsupported hash functions
Previous releases - regressions:
- sched: act_ct: take care of padding in struct zones_ht_key
- netfilter: fix null-ptr-deref in iptable_nat_table_init().
- tcp: adjust clamping window for applications specifying SO_RCVBUF
Previous releases - always broken:
- ethtool: rss: small fixes to spec and GET
- mptcp:
- fix signal endpoint re-add
- pm: fix backup support in signal endpoints
- wifi: ath12k: fix soft lockup on suspend
- eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()
- eth: ice: fix AF_XDP ZC timeout and concurrency issues
- eth: mlx5:
- fix missing lock on sync reset reload
- fix error handling in irq_pool_request_irq
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=z53B
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, bleutooth, BPF and netfilter.
Current release - regressions:
- core: drop bad gso csum_start and offset in virtio_net_hdr
- wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove
- eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()
- phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and
aqr115c
Current release - new code bugs:
- smc: prevent UAF in inet_create()
- bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend
- eth: bnxt: reject unsupported hash functions
Previous releases - regressions:
- sched: act_ct: take care of padding in struct zones_ht_key
- netfilter: fix null-ptr-deref in iptable_nat_table_init().
- tcp: adjust clamping window for applications specifying SO_RCVBUF
Previous releases - always broken:
- ethtool: rss: small fixes to spec and GET
- mptcp:
- fix signal endpoint re-add
- pm: fix backup support in signal endpoints
- wifi: ath12k: fix soft lockup on suspend
- eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()
- eth: ice: fix AF_XDP ZC timeout and concurrency issues
- eth: mlx5:
- fix missing lock on sync reset reload
- fix error handling in irq_pool_request_irq"
* tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
mptcp: fix duplicate data handling
mptcp: fix bad RCVPRUNED mib accounting
ipv6: fix ndisc_is_useropt() handling for PIO
igc: Fix double reset adapter triggered from a single taprio cmd
net: MAINTAINERS: Demote Qualcomm IPA to "maintained"
net: wan: fsl_qmc_hdlc: Discard received CRC
net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex
net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys
net/mlx5e: Fix CT entry update leaks of modify header context
net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability
net/mlx5: Fix missing lock on sync reset reload
net/mlx5: Lag, don't use the hardcoded value of the first port
net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule
net/mlx5: Fix error handling in irq_pool_request_irq
net/mlx5: Always drain health in shutdown callback
net: Add skbuff.h to MAINTAINERS
r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
net: drop bad gso csum_start and offset in virtio_net_hdr
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZqohDAAKCRDbK58LschI
g77FAQC4073GlQovH1d0owAjEbTllWAiZo7WYp/qY8GcJO5GqAEAyuefutwMQA8Z
7WxoXVrnOGxAGg/HzXJmY/w0GCaVRg8=
=nVz5
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-31
We've added 2 non-merge commits during the last 2 day(s) which contain
a total of 2 files changed, 2 insertions(+), 2 deletions(-).
The main changes are:
1) Fix BPF selftest build after tree sync with regards to a _GNU_SOURCE
macro redefined compilation error, from Stanislav Fomichev.
2) Fix a wrong test in the ASSERT_OK() check in uprobe_syscall BPF selftest,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test
selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp
====================
Link: https://patch.msgid.link/20240731115706.19677-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already have some testcases verifying that we can call
BPF_PROG_TYPE_SYSCALL progs and invoke scx_bpf_exit(). Let's extend that to
also call scx_bpf_create_dsq() so we get coverage for that as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add RTC wakeup alarm for devices to resume after specific time interval.
This improvement in the test will help in enabling this test
in the CI systems and will eliminate the need of manual intervention
for resuming back the devices after suspend/hibernation.
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The python unittest module writes all its output to stderr, even when
the run is clean. Redirect its output logs to stdout.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The Python finished() helper currently exits with KSFT_FAIL when there
are only passed and skipped tests. Fix the logic to exit with KSFT_PASS
instead, making it consistent with its C and bash counterparts
(ksft_finished() and ktap_finished() respectively).
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Fixes: dacf1d7a78 ("kselftest: Add test to verify probe of devices from discoverable buses")
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current cgroup_dev test mostly tests that device operation is accepted or
refused base on passed major/minor (and so, any operation performed during
test involves only char device)
Add a small subtest ensuring that the device type passed to bpf program
allows it to take decisions as well.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-3-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_dev_cgroup is defined as a standalone test program, and so is not
executed in CI.
Convert it to test_progs framework so it is tested automatically in CI, and
remove the old test. In order to be able to run it in test_progs, /dev/null
must remain usable, so change the new test to test operations on devices
1:3 as valid, and operations on devices 1:5 (/dev/zero) as invalid.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-2-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_dev_cgroup currently loads a small bpf program allowing any access on
urandom and zero devices, disabling access to any other device. It makes
migrating this test to test_progs impossible, since this one manipulates
extensively /dev/null.
Allow /dev/null manipulation in dev_cgroup program to make its usage in
test_progs framework possible. Update test_dev_cgroup.c as well to match
this change while it has not been removed.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-1-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a flag to binder_features to indicate that the freeze notification
feature is available.
Signed-off-by: Yu-Ting Tseng <yutingtseng@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240709070047.4055369-6-yutingtseng@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building selftests with RELEASE=1 using GCC compiler, it complaints
about uninitialized err. Fix the problem.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240730231805.1933923-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Linux 5.1 implemented 64-bit time types and related syscalls to address the
Y2038 problem generally across archs. Userspace handling of Y2038 varies
with the libc however. While musl libc uses 64-bit time across all 32-bit
and 64-bit platforms, GNU glibc uses 64-bit time on 64-bit platforms but
defaults to 32-bit time on 32-bit platforms unless they "opt-in" to 64-bit
time or explicitly use 64-bit syscalls and time structures.
One specific area is the standard setsockopt() call, SO_TIMESTAMPNS option
used for timestamping, and the related output 'struct timespec'. GNU glibc
defaults as above, also exposing the SO_TIMESTAMPNS_NEW flag to explicitly
use a 64-bit call and 'struct __kernel_timespec'. Since these are not
exposed or needed with musl libc, their use in tc_redirect.c leads to
compile errors building for mips64el/musl:
tc_redirect.c: In function 'rcv_tstamp':
tc_redirect.c:425:32: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
425 | cmsg->cmsg_type == SO_TIMESTAMPNS_NEW)
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
tc_redirect.c:425:32: note: each undeclared identifier is reported only once for each function it appears in
tc_redirect.c: In function 'test_inet_dtime':
tc_redirect.c:491:49: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
491 | err = setsockopt(listen_fd, SOL_SOCKET, SO_TIMESTAMPNS_NEW,
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
However, using SO_TIMESTAMPNS_NEW isn't strictly needed, nor is Y2038 being
explicitly tested. The timestamp checks in tc_redirect.c are simple: the
packet receive timestamp is non-zero and processed/handled in less than 5
seconds.
Switch to using the standard setsockopt() call and SO_TIMESTAMPNS option to
ensure compatibility across glibc and musl libc. In the worst-case, there
is a 5-second window 14 years from now where tc_redirect tests may fail on
32-bit systems. However, we should reasonably expect glibc to adopt a
64-bit mandate rather than the current "opt-in" policy before the Y2038
roll-over.
Fixes: ce6f6cffae ("selftests/bpf: Wait for the netstamp_needed_key static key to be turned on")
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/031d656c058b4e55ceae56ef49c4e1729b5090f3.1722244708.git.tony.ambardar@gmail.com
Typically stdin, stdout, stderr are treated as reserved identifiers under
ISO/ANSI C and libc implementations further define these as macros, both in
glibc and musl <stdio.h>.
However, while glibc defines:
...
/* Standard streams. */
extern FILE *stdin; /* Standard input stream. */
extern FILE *stdout; /* Standard output stream. */
extern FILE *stderr; /* Standard error output stream. */
/* C89/C99 say they're macros. Make them happy. */
#define stdin stdin
#define stdout stdout
#define stderr stderr
...
musl instead uses (legally):
...
extern FILE *const stdin;
extern FILE *const stdout;
extern FILE *const stderr;
#define stdin (stdin)
#define stdout (stdout)
#define stderr (stderr)
...
The latter results in compile errors when the names are reused as fields of
'struct test_env' and elsewhere in test_progs.[ch] and reg_bounds.c.
Rename the fields to stdout_saved and stderr_saved to avoid many errors
seen building against musl, e.g.:
In file included from test_progs.h:6,
from test_progs.c:5:
test_progs.c: In function 'print_test_result':
test_progs.c:237:21: error: expected identifier before '(' token
237 | fprintf(env.stdout, "#%-*d %s:", TEST_NUM_WIDTH, test->test_num, test->test_name);
| ^~~~~~
test_progs.c:237:9: error: too few arguments to function 'fprintf'
237 | fprintf(env.stdout, "#%-*d %s:", TEST_NUM_WIDTH, test->test_num, test->test_name);
| ^~~~~~~
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ZqR2DuHdBXPX%2Fyx8@kodidev-ubuntu/
Link: https://lore.kernel.org/bpf/684ea17548e237f39dfb3f7a3d33450069015b21.1722244708.git.tony.ambardar@gmail.com
Include GNU <execinfo.h> header only with glibc and provide weak, stubbed
backtrace functions as a fallback in test_progs.c. This allows for non-GNU
replacements while avoiding compile errors (e.g. with musl libc) like:
test_progs.c:13:10: fatal error: execinfo.h: No such file or directory
13 | #include <execinfo.h> /* backtrace */
| ^~~~~~~~~~~~
test_progs.c: In function 'crash_handler':
test_progs.c:1034:14: error: implicit declaration of function 'backtrace' [-Werror=implicit-function-declaration]
1034 | sz = backtrace(bt, ARRAY_SIZE(bt));
| ^~~~~~~~~
test_progs.c:1045:9: error: implicit declaration of function 'backtrace_symbols_fd' [-Werror=implicit-function-declaration]
1045 | backtrace_symbols_fd(bt, sz, STDERR_FILENO);
| ^~~~~~~~~~~~~~~~~~~~
Fixes: 9fb156bb82 ("selftests/bpf: Print backtrace on SIGSEGV in test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/aa6dc8e23710cb457b278039d0081de7e7b4847d.1722244708.git.tony.ambardar@gmail.com
Compiling lwt_reroute.c with GCC 12.3 for mips64el/musl-libc yields errors:
In file included from .../include/arpa/inet.h:9,
from ./test_progs.h:18,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:11,
from tools/testing/selftests/bpf/prog_tests/lwt_reroute.c:52:
.../include/netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../include/linux/icmp.h:24,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:9:
.../include/linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../include/netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../include/linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
These errors occur because <linux/in6.h> is included before <netinet/in.h>,
bypassing the Linux uapi/libc compat mechanism's partial musl support. As
described in [1] and [2], fix these errors by including <netinet/in.h> in
lwt_reroute.c before any uapi headers.
[1]: commit c0bace7984 ("uapi libc compat: add fallback for unsupported libcs")
[2]: https://git.musl-libc.org/cgit/musl/commit/?id=04983f227238
Fixes: 6c77997bc6 ("selftests/bpf: Add lwt_xmit tests for BPF_REROUTE")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bd2908aec0755ba8b75f5dc41848b00585f5c73e.1722244708.git.tony.ambardar@gmail.com
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Fixes: 7c8dce4b16 ("bpftool: Make skeleton C code compilable with C++ compiler")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Fixes: 3fbfadce60 ("bpf: Fix test_lru_sanity5() in test_lru_map.c")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
Current code parses arguments with strtok_r() using a construct like
char *state = NULL;
while ((next = strtok_r(state ? NULL : input, ",", &state))) {
...
}
where logic assumes the 'state' var can distinguish between first and
subsequent strtok_r() calls, and adjusts parameters accordingly. However,
'state' is strictly internal context for strtok_r() and no such assumptions
are supported in the man page. Moreover, the exact behaviour of 'state'
depends on the libc implementation, making the above code fragile.
Indeed, invoking "./test_progs -t <test_name>" on mips64el/musl will hang,
with the above code in an infinite loop.
Similarly, we see strange behaviour running 'veristat' on mips64el/musl:
$ ./veristat -e file,prog,verdict,insns -C two-ok add-failure
Can't specify more than 9 stats
Rewrite code using a counter to distinguish between strtok_r() calls.
Fixes: 61ddff373f ("selftests/bpf: Improve by-name subtest selection logic in prog_tests")
Fixes: 394169b079 ("selftests/bpf: add comparison mode to veristat")
Fixes: c8bc5e0509 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/392d8bf5559f85fa37926c1494e62312ef252c3d.1722244708.git.tony.ambardar@gmail.com
Use the POSIX version of basename() to allow compilation against non-gnu
libc (e.g. musl). Include <libgen.h> ahead of <string.h> to enable using
functions from the latter while preferring POSIX over GNU basename().
In veristat.c, rely on strdupa() to avoid basename() altering the passed
"const char" argument. This is not needed in xskxceiver.c since the arg
is mutable and the program exits immediately after usage.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/0fd3c9f3c605e6cba33504213c9df287817ade04.1722244708.git.tony.ambardar@gmail.com
Fixing ASSERT_OK condition check in uprobe_syscall test,
otherwise we return from test on pipe success.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240726180847.684584-1-jolsa@kernel.org
Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.
The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.
The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.
The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.
The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:
MPTcpExtMPJoinSynBackupRx
MPTcpExtMPJoinSynAckBackupRx
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In prog_tests/test_global_maps_resize.c, we test various use cases for
resizing global maps. Commit 7244100e0389 ("libbpf: Don't take direct
pointers into BTF data from st_ops") updated libbpf to not store pointers
to volatile BTF data, which for some users, was causing a UAF when resizing
a datasec array.
Let's ensure we have coverage for resizing datasec arrays with struct_ops
progs by also including a struct_ops map and struct_ops prog in the
test_global_map_resize skeleton. The map is automatically loaded, so we
don't need to do anything other than add it to the BPF prog being tested
to get the coverage.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240725032214.50676-1-void@manifault.com
test_xdp_veth.sh tests that XDP return codes work as expected, by bringing
up multiple veth pairs isolated in different namespaces, attaching specific
xdp programs to each interface, and ensuring that the whole chain allows to
ping one end interface from the first one. The test runs well but is
currently not integrated in test_progs, which prevents it from being run
automatically in the CI infrastructure.
Rewrite it as a C test relying on libbpf to allow running it in the CI
infrastructure. The new code brings up the same network infrastructure and
reuses the same eBPF programs as test_xdp_veth.sh, for which skeletons are
already generated by the bpf tests makefile.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-2-23bdba21b2f9@bootlin.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
xdp_redirect_map.c is a bpf program used by test_xdp_veth.sh, which is not
handled by the generic test runner (test_progs). To allow converting this
test to test_progs, the corresponding program must be updated to allow
handling it through skeletons generated by bpftool and libbpf.
Update programs section names to allow to manipulate those with libbpf.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-1-23bdba21b2f9@bootlin.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Fixes: 9e5bd1f763 ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/crypto_sanity.c:10:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from crypto_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 91541ab192 ("selftests: bpf: crypto skcipher algo selftests")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/bpf/911293968f424ad7b462d8805aeb3baee8f4985b.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/decap_sanity.c:9:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from decap_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 70a00e2f1d ("selftests/bpf: Test bpf_skb_adjust_room on CHECKSUM_PARTIAL")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e986ba2d7edccd254b54f7cd049b98f10bafa8c3.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/icmp.h>' which is already provided in
'lwt_helpers.h'. This avoids errors seen compiling for mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from lwt_redirect.c:51:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../linux/icmp.h:24,
from lwt_redirect.c:50:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 43a7c3ef8a ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/3869dda876d5206d2f8d4dd67331c739ceb0c7f8.1721713597.git.tony.ambardar@gmail.com
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
Fixes: 6bcd39d366 ("selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/11c3af75a7eb6bcb7ad9acfae6a6f470c572eb82.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 1f4f80fed2 ("selftests/bpf: test_progs: convert test_tcp_rtt")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
Fixes: ae173a9157 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
Fixes: 580d656d80 ("selftests/bpf: Add kfree_skb raw_tp test")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr', with members 'doff' and 'urg_ptr', is
not exposed by musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
parse_tcp_hdr_opt.c:18:21: error: 'struct tcphdr' has no member named 'urg_ptr'
18 | .pk6_v6.tcp.urg_ptr = 123,
| ^~~~~~~
parse_tcp_hdr_opt.c:19:21: error: 'struct tcphdr' has no member named 'doff'
19 | .pk6_v6.tcp.doff = 9, /* 16 bytes of options */
| ^~~~
Fixes: cfa7b01189 ("selftests/bpf: tests for using dynptrs to parse skb and xdp buffers")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ac5440213c242c62cb4e0d9e0a9cd5058b6a31f6.1721713597.git.tony.ambardar@gmail.com
Update ns_current_pid_tgid.c to use '#include <fcntl.h>' and avoid compile
error against mips64el/musl libc:
In file included from .../prog_tests/ns_current_pid_tgid.c:14:
.../include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
cc1: all warnings being treated as errors
Fixes: 09c02d553c ("bpf, selftests: Fold test_current_pid_tgid_new_ns into test_progs.")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8bdc869749177b575025bf69600a4ce591822609.1721713597.git.tony.ambardar@gmail.com
Explicitly include '<linux/build_bug.h>' to fix errors seen compiling with
gcc targeting mips64el/musl-libc:
user_ringbuf.c: In function 'test_user_ringbuf_loop':
user_ringbuf.c:426:9: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
426 | BUILD_BUG_ON(total_samples <= c_max_entries);
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e5a9df51c7 ("selftests/bpf: Add selftests validating the user ringbuf")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b28575f9221ec54871c46a2e87612bb4bbf46ccd.1721713597.git.tony.ambardar@gmail.com
Include <limits.h> in 'bench.h' to provide a UINT_MAX definition and avoid
multiple compile errors against mips64el/musl-libc like:
benchs/bench_local_storage.c: In function 'parse_arg':
benchs/bench_local_storage.c:40:38: error: 'UINT_MAX' undeclared (first use in this function)
40 | if (ret < 1 || ret > UINT_MAX) {
| ^~~~~~~~
benchs/bench_local_storage.c:11:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
10 | #include <test_btf.h>
+++ |+#include <limits.h>
11 |
seen with bench_local_storage.c, bench_local_storage_rcu_tasks_trace.c, and
bench_bpf_hashmap_lookup.c.
Fixes: 7308748925 ("selftests/bpf: Add benchmark for local_storage get")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f64a9d9fcff40a7fca090a65a68a9b62a468e16.1721713597.git.tony.ambardar@gmail.com
Add a "bpf_util.h" include to avoid the following error seen compiling for
mips64el with musl libc:
bench.c: In function 'find_benchmark':
bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration]
590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 8e7c2a023a ("selftests/bpf: Add benchmark runner infrastructure")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bc4dde77dfcd17a825d8f28f72f3292341966810.1721713597.git.tony.ambardar@gmail.com
The addition of general support for unprivileged tests in test_loader.c
breaks building test_verifier on non-glibc (e.g. musl) systems, due to the
inclusion of glibc extension '<error.h>' in 'unpriv_helpers.c'. However,
the header is actually not needed, so remove it to restore building.
Similarly for sk_lookup.c and flow_dissector.c, error.h is not necessary
and causes problems, so drop them.
Fixes: 1d56ade032 ("selftests/bpf: Unprivileged tests for test_loader.c")
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Fixes: 0905beec9f ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/5664367edf5fea4f3f4b4aec3b182bcfc6edff9c.1721713597.git.tony.ambardar@gmail.com
Existing code calls getsockname() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
bpf_iter_setsockopt.c: In function 'get_local_port':
bpf_iter_setsockopt.c:98:30: error: passing argument 2 of 'getsockname' from incompatible pointer type [-Werror=incompatible-pointer-types]
98 | if (!getsockname(fd, &addr, &addrlen))
| ^~~~~
| |
| struct sockaddr_in6 *
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17,
from bpf_iter_setsockopt.c:5:
.../sys/socket.h:391:23: note: expected 'struct sockaddr * restrict' but argument is of type 'struct sockaddr_in6 *'
391 | int getsockname (int, struct sockaddr *__restrict, socklen_t *__restrict);
| ^
cc1: all warnings being treated as errors
This compiled under glibc only because the argument is declared to be a
"funky" transparent union which includes both types above. Explicitly cast
the argument to allow compiling for both musl and glibc.
Fixes: eed92afdd1 ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/f41def0f17b27a23b1709080e4e3f37f4cc11ca9.1721713597.git.tony.ambardar@gmail.com
Cast 'rlim_t' argument to match expected type of printf() format and avoid
compile errors seen building for mips64el/musl-libc:
In file included from map_tests/sk_storage_map.c:20:
map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free':
map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=]
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ^~~~~~~~~~~~~~~~~~~~~~~
415 | rlim_new.rlim_cur, errno);
| ~~~~~~~~~~~~~~~~~
| |
| rlim_t {aka long long unsigned int}
./test_maps.h:12:24: note: in definition of macro 'CHECK'
12 | printf(format); \
| ^~~~~~
map_tests/sk_storage_map.c:414:68: note: format string is defined here
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ~~^
| |
| long unsigned int
| %llu
cc1: all warnings being treated as errors
Fixes: 51a0e301a5 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com
Use pid_t rather than __pid_t when allocating memory for 'worker_pids' in
'struct test_env', as this is its declared type and also avoids compile
errors seen building against musl libc on mipsel64:
test_progs.c:1738:49: error: '__pid_t' undeclared (first use in this function); did you mean 'pid_t'?
1738 | env.worker_pids = calloc(sizeof(__pid_t), env.workers);
| ^~~~~~~
| pid_t
test_progs.c:1738:49: note: each undeclared identifier is reported only once for each function it appears in
Fixes: 91b2c0afd0 ("selftests/bpf: Add parallelism to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/c6447da51a94babc1931711a43e2ceecb135c93d.1721713597.git.tony.ambardar@gmail.com
Tests for no_caller_saved_registers processing logic
(see verifier.c:match_and_mark_nocsr_pattern()):
- a canary positive test case;
- a canary test case for arm64 and riscv64;
- various tests with broken patterns;
- tests with read/write fixed/varying stack access that violate nocsr
stack access contract;
- tests with multiple subprograms;
- tests using nocsr in combination with may_goto/bpf_loop,
as all of these features affect stack depth;
- tests for nocsr stack spills below max stack depth.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add annotations __arch_x86_64, __arch_arm64, __arch_riscv64
to specify on which architecture the test case should be tested.
Several __arch_* annotations could be specified at once.
When test case is not run on current arch it is marked as skipped.
For example, the following would be tested only on arm64 and riscv64:
SEC("raw_tp")
__arch_arm64
__arch_riscv64
__xlated("1: *(u64 *)(r10 - 16) = r1")
__xlated("2: call")
__xlated("3: r1 = *(u64 *)(r10 - 16);")
__success
__naked void canary_arm64_riscv64(void)
{
asm volatile (
"r1 = 1;"
"*(u64 *)(r10 - 16) = r1;"
"call %[bpf_get_smp_processor_id];"
"r1 = *(u64 *)(r10 - 16);"
"exit;"
:
: __imm(bpf_get_smp_processor_id)
: __clobber_all);
}
On x86 it would be skipped:
#467/2 verifier_nocsr/canary_arm64_riscv64:SKIP
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a macro __xlated("...") for use with test_loader tests.
When such annotations are present for the test case:
- bpf_prog_get_info_by_fd() is used to get BPF program after all
rewrites are applied by verifier.
- the program is disassembled and patterns specified in __xlated are
searched for in the disassembly text.
__xlated matching follows the same mechanics as __msg:
each subsequent pattern is matched from the point where
previous pattern ended.
This allows to write tests like below, where the goal is to verify the
behavior of one of the of the transformations applied by verifier:
SEC("raw_tp")
__xlated("1: w0 = ")
__xlated("2: r0 = &(void __percpu *)(r0)")
__xlated("3: r0 = *(u32 *)(r0 +0)")
__xlated("4: exit")
__success __naked void simple(void)
{
asm volatile (
"call %[bpf_get_smp_processor_id];"
"exit;"
:
: __imm(bpf_get_smp_processor_id)
: __clobber_all);
}
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Non-functional change: use a separate data structure to represented
expected messages in test_loader.
This would allow to use the same functionality for expected set of
disassembled instructions in the follow-up commit.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The call stack for validate_case() function looks as follows:
- test_loader__run_subtests()
- process_subtest()
- run_subtest()
- prepare_case(), which does 'tester->next_match_pos = 0';
- validate_case(), which increments tester->next_match_pos.
Hence, each subtest is run with next_match_pos freshly set to zero.
Meaning that there is no need to persist this variable in the
struct test_loader, use local variable instead.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Adjust disasm_helpers.c:disasm_insn() to account for the following
part of the verifier.c:jit_subprogs:
for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) {
/* ... */
if (!bpf_pseudo_call(insn))
continue;
insn->off = env->insn_aux_data[i].call_imm;
subprog = find_subprog(env, i + insn->off + 1);
insn->imm = subprog;
}
Where verifier moves offset of the subprogram to the insn->off field.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
struct bpf_insn *disasm_insn(struct bpf_insn *insn, char *buf, size_t buf_sz);
Disassembles instruction 'insn' to a text buffer 'buf'.
Removes insn->code hex prefix added by kernel disassembly routine.
Returns a pointer to the next instruction
(increments insn by either 1 or 2).
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a few reg_bounds selftests to test 32/16/8-bit ldsx and subreg comparison.
Without the previous patch, all added tests will fail.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240723162940.2732171-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
