- The rework that uncoupled physical and virtual address spaces
inadvertently prevented KASAN shadow mappings from using large
pages. Restore large page mappings for KASAN shadows
- Add decompressor routine physmem_alloc() that may fail,
unlike physmem_alloc_or_die(). This allows callers to
implement fallback paths
- Allow falling back from large pages to smaller pages (1MB or
4KB) if the allocation of 2GB pages in the decompressor can
not be fulfilled
- Add to the decompressor boot print support of "%%" format
string, width and padding hadnling, length modifiers and
decimal conversion specifiers
- Add to the decompressor message severity levels similar to
kernel ones. Support command-line options that control
console output verbosity
- Replaces boot_printk() calls with appropriate loglevel-
specific helpers such as boot_emerg(), boot_warn(), and
boot_debug().
- Collect all boot messages into a ring buffer independent
of the current log level. This is particularly useful for
early crash analysis
- If 'earlyprintk' command line parameter is not specified, store
decompressor boot messages in a ring buffer to be printed later
by the kernel, once the console driver is registered
- Add 'bootdebug' command line parameter to enable printing of
decompressor debug messages when needed. That parameters allows
message supressing and filtering
- Dump boot messages on a decompressor crash, but only if
'bootdebug' command line parameter is enabled
- When CONFIG_PRINTK_TIME is enabled, add timestamps to boot
messages in the same format as regular printk()
- Dump physical memory tracking information on boot:
online ranges, reserved areas and vmem allocations
- Dump virtual memory layout and randomization details
- Improve decompression error reporting and dump the message
ring buffer in case the boot failed and system halted
- Add an exception handler which handles exceptions when FPU
control register is attempted to be set to an invalid value.
Remove '.fixup' section as result of this change
- Use 'A', 'O', and 'R' inline assembly format flags, which
allows recent Clang compilers to generate better FPU code
- Rework uaccess code so it reads better and generates more
efficient code
- Cleanup futex inline assembly code
- Disable KMSAN instrumention for futex inline assemblies, which
contain dereferenced user pointers. Otherwise, shadows for the
user pointers would be accessed
- PFs which are not initially configured but in standby create
only a single-function PCI domain. If they are configured later
on, sibling PFs and their child VFs will not be added to their
PCI domain breaking SR-IOV expectations. Fix that by allowing
initially configured but in standby PFs create multi-function
PCI domains
- Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid
compile errors caused by kernel's own definitions of 'bool',
'false', and 'true' conflicting with the C23 reserved keywords
- Fix sclp subsystem failure when a sclp console is not present
- Fix misuse of non-NULL terminated strings in vmlogrdr driver
- Various other small improvements, cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZ5t0jhccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8A4wAP91BcHtV4OTmoMsG4JTwiy9wTzI
zro9IrBSCLPLED7kfQEAzjEspd5gWMFDnIM/KxXmCNHA/nBTXVh/1F+b1F0z+Q8=
=JfEG
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- The rework that uncoupled physical and virtual address spaces
inadvertently prevented KASAN shadow mappings from using large pages.
Restore large page mappings for KASAN shadows
- Add decompressor routine physmem_alloc() that may fail, unlike
physmem_alloc_or_die(). This allows callers to implement fallback
paths
- Allow falling back from large pages to smaller pages (1MB or 4KB) if
the allocation of 2GB pages in the decompressor can not be fulfilled
- Add to the decompressor boot print support of "%%" format string,
width and padding hadnling, length modifiers and decimal conversion
specifiers
- Add to the decompressor message severity levels similar to kernel
ones. Support command-line options that control console output
verbosity
- Replaces boot_printk() calls with appropriate loglevel- specific
helpers such as boot_emerg(), boot_warn(), and boot_debug().
- Collect all boot messages into a ring buffer independent of the
current log level. This is particularly useful for early crash
analysis
- If 'earlyprintk' command line parameter is not specified, store
decompressor boot messages in a ring buffer to be printed later by
the kernel, once the console driver is registered
- Add 'bootdebug' command line parameter to enable printing of
decompressor debug messages when needed. That parameters allows
message suppressing and filtering
- Dump boot messages on a decompressor crash, but only if 'bootdebug'
command line parameter is enabled
- When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages
in the same format as regular printk()
- Dump physical memory tracking information on boot: online ranges,
reserved areas and vmem allocations
- Dump virtual memory layout and randomization details
- Improve decompression error reporting and dump the message ring
buffer in case the boot failed and system halted
- Add an exception handler which handles exceptions when FPU control
register is attempted to be set to an invalid value. Remove '.fixup'
section as result of this change
- Use 'A', 'O', and 'R' inline assembly format flags, which allows
recent Clang compilers to generate better FPU code
- Rework uaccess code so it reads better and generates more efficient
code
- Cleanup futex inline assembly code
- Disable KMSAN instrumention for futex inline assemblies, which
contain dereferenced user pointers. Otherwise, shadows for the user
pointers would be accessed
- PFs which are not initially configured but in standby create only a
single-function PCI domain. If they are configured later on, sibling
PFs and their child VFs will not be added to their PCI domain
breaking SR-IOV expectations.
Fix that by allowing initially configured but in standby PFs create
multi-function PCI domains
- Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid
compile errors caused by kernel's own definitions of 'bool', 'false',
and 'true' conflicting with the C23 reserved keywords
- Fix sclp subsystem failure when a sclp console is not present
- Fix misuse of non-NULL terminated strings in vmlogrdr driver
- Various other small improvements, cleanups and fixes
* tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
s390/vmlogrdr: Use array instead of string initializer
s390/vmlogrdr: Use internal_name for error messages
s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()
s390/tools: Use array instead of string initializer
s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init()
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
s390/bitops: Use correct constraint for arch_test_bit() inline assembly
s390/pci: Fix SR-IOV for PFs initially in standby
s390/futex: Avoid KMSAN instrumention for user pointers
s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline
s390/futex: Cleanup futex_atomic_cmpxchg_inatomic()
s390/futex: Generate futex atomic op functions
s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER
s390/uaccess: Use asm goto for put_user()/get_user()
s390/uaccess: Remove usage of the oac specifier
s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling
s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints
s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers
s390/uaccess: Move put_user() / __put_user() close to put_user() asm code
s390/uaccess: Use asm goto for __mvc_kernel_nofault()
...
Compiling vmlogrdr with GCC 15 generates this warning:
CC [M] drivers/s390/char/vmlogrdr.o
drivers/s390/char/vmlogrdr.c:126:29: error: initializer-string for array
of ‘char’ is too long [-Werror=unterminated-string-initialization]
126 | { .system_service = "*LOGREC ",
Given that the system_service array intentionally contains a non-null
terminated string use an array initializer, instead of string
initializer to get rid of this warning.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use the internal_name member of vmlogrdr_priv_t to print error messages
instead of the system_service member. The system_service member is not a
string, but a non-null terminated eight byte character array, which
contains the ASCII representation of a z/VM system service.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem
was added to smp_prepare_cpus(). This will usually succeed since the sclp
subsystem is implicitly initialized early enough if an sclp based console
is present.
If no such console is present the initialization happens with an
arch_initcall(); in such cases calls to the sclp subsystem will fail.
For CPU detection this means that the fallback sigp loop will be used
permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp
request.
Fix this by adding an explicit early sclp_init() call via
arch_cpu_finalize_init().
Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com>
Fixes: 4a39f12e75 ("s390/smp: Switch to GENERIC_CPU_DEVICES")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr) The
major core change is the renaming of the slave_ methods plus a bit of
constification. The rest are minor updates and fixes.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ5ZQKSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMdAQCyVlDZ
v/3EFCuC4U1l70mMu8t+F4RPvqYxM3QPCi5dDQEA751YN/kaqxeXZDqGUKCAOE3K
Nl4XFTfLEkDVrQFFqPc=
=9sV8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr).
The major core change is the renaming of the slave_ methods plus a bit
of constification. The rest are minor updates and fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (103 commits)
scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()
scsi: fnic: Test for memory allocation failure and return error code
scsi: fnic: Return appropriate error code from failure of scsi drv init
scsi: fnic: Return appropriate error code for mem alloc failure
scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macro
scsi: fnic: Fix use of uninitialized value in debug message
scsi: fnic: Delete incorrect debugfs error handling
scsi: fnic: Remove unnecessary else to fix warning in FDLS FIP
scsi: fnic: Remove extern definition from .c files
scsi: fnic: Remove unnecessary else and unnecessary break in FDLS
scsi: mpi3mr: Fix possible crash when setting up bsg fails
scsi: ufs: bsg: Set bsg_queue to NULL after removal
scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails
scsi: st: Don't set pos_unknown just after device recognition
scsi: aic7xxx: Fix build 'aicasm' warning
scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
scsi: scsi_debug: Constify sdebug_driver_template
scsi: documentation: Corrections for struct updates
scsi: driver-api: documentation: Change what is added to docbook
...
- Select config option KASAN_VMALLOC if KASAN is enabled
- Select config option VMAP_STACK unconditionally
- Implement arch_atomic_inc() / arch_atomic_dec() functions
which result in a single instruction if compiled for z196
or newer architectures
- Make layering between atomic.h and atomic_ops.h consistent
- Comment s390 preempt_count implementation
- Remove pre MARCH_HAS_Z196_FEATURES preempt count implementation
- GCC uses the number of lines of an inline assembly to calculate
number of instructions and decide on inlining. Therefore remove
superfluous new lines from a couple of inline assemblies.
- Provide arch_atomic_*_and_test() implementations that allow the
compiler to generate slightly better code.
- Optimize __preempt_count_dec_and_test()
- Remove __bootdata annotations from declarations in header files
- Add missing include of <linux/smp.h> in abs_lowcore.h to provide
declarations for get_cpu() and put_cpu() used in the code
- Fix suboptimal kernel image base when running make kasan.config
- Remove huge_pte_none() and huge_pte_none_mostly() as are identical
to the generic variants
- Remove unused PAGE_KERNEL_EXEC, SEGMENT_KERNEL_EXEC,
and REGION3_KERNEL_EXEC defines
- Simplify noexec page protection handling and change the page,
segment and region3 protection definitions automatically if the
instruction execution-protection facility is not available
- Save one instruction and prefer EXRL instruction over EX in
string, xor_*(), amode31 and other functions
- Create /dev/diag misc device to fetch diagnose specific
information from the kernel and provide it to userspace
- Retrieve electrical power readings using DIAGNOSE 0x324 ioctl
- Make ccw_device_get_ciw() consistent and use array indices
instead of pointer arithmetic
* s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into one place
- The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that in s390 code
- Add missing TLB range adjustment in pud_free_tlb()
- Improve topology setup by adding early polarization detection
- Fix length checks in codepage_convert() function
- The generic bitops implementation is nearly identical to the s390 one.
Switch to the generic variant and decrease a bit the kernel image size
- Provide an optimized arch_test_bit() implementation which makes use of
flag output constraint. This generates slightly better code
- Provide memory topology information obtanied with DIAGNOSE 0x310
using ioctl.
- Various other small improvements, fixes, and cleanups
These changes were added with a merge of 'pci-device-recovery' branch
- Add PCI error recovery status mechanism
- Simplify and document debug_next_entry() logic
- Split private data allocation and freeing out of debug file
open() and close() operations
- Add debug_dump() function that gets a textual representation
of a debug info (e.g. PCI recovery hardware error logs)
- Add formatted content of pci_debug_msg_id to the PCI report
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZ4pkVxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8GulAQDg/7pCj1fXH5XKN9W16972OYQD
pNwfCekw8suO8HUBCgEAkzdgTJC6/thifrnUt+Gj8HqASh//Qzw/6Q2Jk6595gk=
=lE3V
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Select config option KASAN_VMALLOC if KASAN is enabled
- Select config option VMAP_STACK unconditionally
- Implement arch_atomic_inc() / arch_atomic_dec() functions which
result in a single instruction if compiled for z196 or newer
architectures
- Make layering between atomic.h and atomic_ops.h consistent
- Comment s390 preempt_count implementation
- Remove pre MARCH_HAS_Z196_FEATURES preempt count implementation
- GCC uses the number of lines of an inline assembly to calculate
number of instructions and decide on inlining. Therefore remove
superfluous new lines from a couple of inline assemblies.
- Provide arch_atomic_*_and_test() implementations that allow the
compiler to generate slightly better code.
- Optimize __preempt_count_dec_and_test()
- Remove __bootdata annotations from declarations in header files
- Add missing include of <linux/smp.h> in abs_lowcore.h to provide
declarations for get_cpu() and put_cpu() used in the code
- Fix suboptimal kernel image base when running make kasan.config
- Remove huge_pte_none() and huge_pte_none_mostly() as are identical to
the generic variants
- Remove unused PAGE_KERNEL_EXEC, SEGMENT_KERNEL_EXEC, and
REGION3_KERNEL_EXEC defines
- Simplify noexec page protection handling and change the page, segment
and region3 protection definitions automatically if the instruction
execution-protection facility is not available
- Save one instruction and prefer EXRL instruction over EX in string,
xor_*(), amode31 and other functions
- Create /dev/diag misc device to fetch diagnose specific information
from the kernel and provide it to userspace
- Retrieve electrical power readings using DIAGNOSE 0x324 ioctl
- Make ccw_device_get_ciw() consistent and use array indices instead of
pointer arithmetic
- s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into
one place
- The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that in s390 code
- Add missing TLB range adjustment in pud_free_tlb()
- Improve topology setup by adding early polarization detection
- Fix length checks in codepage_convert() function
- The generic bitops implementation is nearly identical to the s390
one. Switch to the generic variant and decrease a bit the kernel
image size
- Provide an optimized arch_test_bit() implementation which makes use
of flag output constraint. This generates slightly better code
- Provide memory topology information obtanied with DIAGNOSE 0x310
using ioctl.
- Various other small improvements, fixes, and cleanups
Also, some changes came in through a merge of 'pci-device-recovery'
branch:
- Add PCI error recovery status mechanism
- Simplify and document debug_next_entry() logic
- Split private data allocation and freeing out of debug file open()
and close() operations
- Add debug_dump() function that gets a textual representation of a
debug info (e.g. PCI recovery hardware error logs)
- Add formatted content of pci_debug_msg_id to the PCI report
* tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/futex: Fix FUTEX_OP_ANDN implementation
s390/diag: Add memory topology information via diag310
s390/bitops: Provide optimized arch_test_bit()
s390/bitops: Switch to generic bitops
s390/ebcdic: Fix length decrement in codepage_convert()
s390/ebcdic: Fix length check in codepage_convert()
s390/ebcdic: Use exrl instead of ex
s390/amode31: Use exrl instead of ex
s390/stackleak: Use exrl instead of ex in __stackleak_poison()
s390/lib: Use exrl instead of ex in xor functions
s390/topology: Improve topology detection
s390/tlb: Add missing TLB range adjustment
s390/pkey: Constify 'struct bin_attribute'
s390/sclp: Constify 'struct bin_attribute'
s390/pci: Constify 'struct bin_attribute'
s390/ipl: Constify 'struct bin_attribute'
s390/crypto/cpacf: Constify 'struct bin_attribute'
s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into one place
s390/cio: Use array indices instead of pointer arithmetic
s390/qdio: Rename feature flag aif_osa to aif_qdio
...
Introduce diag310 and memory topology related subcodes.
Provide memory topology information obtanied from diag310 to userspace
via diag ioctl.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
As there is only one in-tree user, avoid a transition phase and switch
that user in the same commit. As there are some interdependencies
between the constness of the different symbols in the s390 driver,
covert the whole driver at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241205-sysfs-const-bin_attr-groups_macro-v1-1-ac5e855031e8@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-5-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-4-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Instead of distributing the memory allocation and pointer arithmetic to
place slib and sl on the page that is allocated for them over multiple
functions and comments, move both into the same context directly next to
each other, so that the knowledge of how this is done is immediately
visible.
The actual layout in memory doesn't change with this, just the structure
of the code to achieve it.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
ccw_device_get_ciw() already uses array indices to iterate over the vector
of CIWs, but then switches to pointer arithmetic when returning the one it
found. Change this to make it more consistent.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This feature is not only utilized by OSA, but by QDIO in general. Clear
up possible confusions.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
BLK_MQ_F_SHOULD_MERGE is set for all tag_sets except those that purely
process passthrough commands (bsg-lib, ufs tmf, various nvme admin
queues) and thus don't even check the flag. Remove it to simplify the
driver interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241219060214.1928848-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Niklas Schnelle says:
===================
This patch series enhances the introspectability of the PCI device
recovery for firmware. Until now when Linux performs recovery in
response to a firmware error report. For example, until now firmware
debug data would have no indication if the recovery was successfull or
if it failed, for example due to KVM pass-through.
Improve on this by reporting recovery status as well as some debug
information such as device driver name and s390dbf/pci_msg/sprintf logs
via the SCLP Write Event Data Action Qualifier 2 (Log Data provided)
mechanism.
===================
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Retrieve electrical power readings for resources in a computing
environment via diag 0x324. diag 0x324 stores the power readings in the
power information block (pib).
Provide power readings from pib via diag324 ioctl interface. diag324
ioctl provides new pib to the user only if the threshold time has passed
since the last call. Otherwise, cache data is returned. When there are
no active readers, cleanup of pib buffer is performed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add a mechanism with which the status of PCI error recovery runs
is reported to the platform. Together with the status supply additional
information that may aid in problem determination.
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Nihar Panda <niharp@linux.ibm.com>
Link: https://lore.kernel.org/r/20241205141932.1227039-3-niharp@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit 7c7dc19681 ("[SCSI] zfcp: Simplify handling of ct and els
requests") there are no more such structures as zfcp_send_els and
zfcp_send_ct. Instead there is now one common fsf structure to hold zfcp
data for ct and els requests. Fix parameter description for
zfcp_fsf_send_ct() and zfcp_fsf_send_els() accordingly.
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Nihar Panda <niharp@linux.ibm.com>
Link: https://lore.kernel.org/r/20241205141932.1227039-2-niharp@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The only difference between the .sdev_configure() and .slave_configure()
methods is that the former accepts an additional 'limits' argument.
Convert all SCSI drivers that define a .slave_configure() method to
.sdev_configure(). This patch prepares for removing the
.slave_configure() method. No functionality has been changed.
Acked-by: Geoff Levand <geoff@infradead.org> # for ps3rom
Acked-by: Khalid Aziz <khalid@gonehiking.org> # for the BusLogic driver
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the 2 simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups that
can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog
As mentioned above, there is 2 merge conflicts with your tree, one is
where the file is removed (easy enough to resolve), the second is a
build time error, that has been found in linux-next and the fix can be
seen here:
https://lore.kernel.org/r/20241107212645.41252436@canb.auug.org.au
Other than that, the changes here have been in linux-next with no other
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lEog8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+0ACgw6wN+LkLVIHWhxTq5DYHQ0QCxY8AoJrRIcKe
78h0+OU3OXhOy8JGz62W
=oI5S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
The result of xchg() is not used, and in addition it is used on a one byte
memory area which leads to inefficient code.
Use WRITE_ONCE() instead to achieve the same result with much less
generated code.
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If the page has been exported, do not re-import it. Imports should
only be triggered by the guest. The guest will import the page
automatically when it will need it again, there is no advantage in
importing it manually.
Moreover, vfio_pin_pages() will take an extra reference on the page and
thus will cause the import to always fail. The extra reference would be
dropped only after pointlessly trying to import the page.
Fixes: f88fb13357 ("s390/vfio-ap: make sure nib is shared")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20241115135611.87836-1-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Add firmware sysfs interface which allows user space to retrieve the dump
area size of the machine
- Add 'measurement_chars_full' CHPID sysfs attribute to make the complete
associated Channel-Measurements Characteristics Block available
- Add virtio-mem support
- Move gmap aka KVM page fault handling from the main fault handler to KVM
code. This is the first step to make s390 KVM page fault handling similar
to other architectures. With this first step the main fault handler does
not have any special handling anymore, and therefore convert it to
support LOCK_MM_AND_FIND_VMA
- With gcc 14 s390 support for flag output operand support for inline
assemblies was added. This allows for several optimizations
- Provide a cmpxchg inline assembly which makes use of this, and provide
all variants of arch_try_cmpxchg() so that the compiler can generate
slightly better code
- Convert a few cmpxchg() loops to try_cmpxchg() loops
- Similar to x86 add a CC_OUT() helper macro (and other macros), and
convert all inline assemblies to make use of them, so that depending on
compiler version better code can be generated
- List installed host-key hashes in sysfs if the machine supports the Query
Ultravisor Keys UVC
- Add 'Retrieve Secret' ioctl which allows user space in protected
execution guests to retrieve previously stored secrets from the
Ultravisor
- Add pkey-uv module which supports the conversion of Ultravisor
retrievable secrets to protected keys
- Extend the existing paes cipher to exploit the full AES-XTS hardware
acceleration introduced with message-security assist extension 10
- Convert hopefully all sysfs show functions to use sysfs_emit() so that
the constant flow of such patches stop
- For PCI devices make use of the newly added Topology ID attribute to
enable whole card multi-function support despite the change to PCHID per
port. Additionally improve the overall robustness and usability of
the multifunction support
- Various other small improvements, fixes, and cleanups
-----BEGIN PGP SIGNATURE-----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=v+um
-----END PGP SIGNATURE-----
Merge tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add firmware sysfs interface which allows user space to retrieve the
dump area size of the machine
- Add 'measurement_chars_full' CHPID sysfs attribute to make the
complete associated Channel-Measurements Characteristics Block
available
- Add virtio-mem support
- Move gmap aka KVM page fault handling from the main fault handler to
KVM code. This is the first step to make s390 KVM page fault handling
similar to other architectures. With this first step the main fault
handler does not have any special handling anymore, and therefore
convert it to support LOCK_MM_AND_FIND_VMA
- With gcc 14 s390 support for flag output operand support for inline
assemblies was added. This allows for several optimizations:
- Provide a cmpxchg inline assembly which makes use of this, and
provide all variants of arch_try_cmpxchg() so that the compiler
can generate slightly better code
- Convert a few cmpxchg() loops to try_cmpxchg() loops
- Similar to x86 add a CC_OUT() helper macro (and other macros),
and convert all inline assemblies to make use of them, so that
depending on compiler version better code can be generated
- List installed host-key hashes in sysfs if the machine supports the
Query Ultravisor Keys UVC
- Add 'Retrieve Secret' ioctl which allows user space in protected
execution guests to retrieve previously stored secrets from the
Ultravisor
- Add pkey-uv module which supports the conversion of Ultravisor
retrievable secrets to protected keys
- Extend the existing paes cipher to exploit the full AES-XTS hardware
acceleration introduced with message-security assist extension 10
- Convert hopefully all sysfs show functions to use sysfs_emit() so
that the constant flow of such patches stop
- For PCI devices make use of the newly added Topology ID attribute to
enable whole card multi-function support despite the change to PCHID
per port. Additionally improve the overall robustness and usability
of the multifunction support
- Various other small improvements, fixes, and cleanups
* tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits)
s390/cio/ioasm: Convert to use flag output macros
s390/cio/qdio: Convert to use flag output macros
s390/sclp: Convert to use flag output macros
s390/dasd: Convert to use flag output macros
s390/boot/physmem: Convert to use flag output macros
s390/pci: Convert to use flag output macros
s390/kvm: Convert to use flag output macros
s390/extmem: Convert to use flag output macros
s390/string: Convert to use flag output macros
s390/diag: Convert to use flag output macros
s390/irq: Convert to use flag output macros
s390/smp: Convert to use flag output macros
s390/uv: Convert to use flag output macros
s390/pai: Convert to use flag output macros
s390/mm: Convert to use flag output macros
s390/cpu_mf: Convert to use flag output macros
s390/cpcmd: Convert to use flag output macros
s390/topology: Convert to use flag output macros
s390/time: Convert to use flag output macros
s390/pageattr: Convert to use flag output macros
...
This NULL value is most-likely a copy-paste error from an array
definition. So far the NULL didn't have any effect.
As there will be a union in struct attribute_group at this location,
it will trigger a compiler warning.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241118-sysfs-const-attribute_group-fixes-v1-2-48e0b0ad8cba@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The current "measurement_chars" CHPID sysfs attribute exposes only a
limited, validity-filtered portion of data from the associated Channel-
Measurements Characteristics Block (CMCB). New machine models add data
that is relevant for userspace tooling to the "header"-portion of the
CMCB. This data that is not currently accessible to userspace.
To prevent having to add new sysfs attributes whenever a new bit of data
is added to the CMCB "header", add a new sysfs attribute named
"measurement_chars_full" that exposes the full, unfiltered CMCB.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Get rid of sparse warnings:
CHECK drivers/s390/char/con3270.c
drivers/s390/char/con3270.c:531:15: warning: Using plain integer as NULL pointer
drivers/s390/char/con3270.c:749:15: warning: Using plain integer as NULL pointer
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In case of an early failure in dasd_init, dasd_proc_init is never
called and /proc/dasd* files are never created. That can happen, for
example, if an incompatible or incorrect argument is provided to the
dasd_mod.dasd= kernel parameter.
However, the attempted removal of /proc/dasd* files causes 8 warnings
and backtraces in this case. 4 on the error path within dasd_init and
4 when the dasd module is unloaded. Notice the "removing permanent
/proc entry 'devices'" message that is caused by the dasd_proc_exit
function trying to remove /proc/devices instead of /proc/dasd/devices
since dasd_proc_root_entry is NULL and /proc/devices is indeed
permanent. Example:
------------[ cut here ]------------
removing permanent /proc entry 'devices'
WARNING: CPU: 6 PID: 557 at fs/proc/generic.c:701 remove_proc_entry+0x22e/0x240
CPU: 6 PID: 557 Comm: modprobe Not tainted 6.10.5-1-default #1
openSUSE Tumbleweed f6917bfd6e5a5c7a7e900e0e3b517786fb5c6301
Hardware name: QEMU 8561 QEMU (KVM/Linux)
Krnl PSW : 0704c00180000000 000003fffed0e9f2 (remove_proc_entry+0x232/0x240)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003ff00000027 000003ff00000023 0000000000000028 000002f200000000
000002f3f05bec20 0000037ffecfb7d0 000003ffffdabab0 000003ff7ee4ec72
000003ff7ee4ec72 0000000000000007 000002f280e22600 000002f280e22688
000003ffa252cfa0 0000000000010000 000003fffed0e9ee 0000037ffecfba38
Krnl Code: 000003fffed0e9e2: c020004e7017 larl %r2,000003ffff6dca10
000003fffed0e9e8: c0e5ffdfad24 brasl %r14,000003fffe904430
#000003fffed0e9ee: af000000 mc 0,0
>000003fffed0e9f2: a7f4ff4c brc 15,000003fffed0e88a
000003fffed0e9f6: 0707 bcr 0,%r7
000003fffed0e9f8: 0707 bcr 0,%r7
000003fffed0e9fa: 0707 bcr 0,%r7
000003fffed0e9fc: 0707 bcr 0,%r7
Call Trace:
[<000003fffed0e9f2>] remove_proc_entry+0x232/0x240
([<000003fffed0e9ee>] remove_proc_entry+0x22e/0x240)
[<000003ff7ef5a084>] dasd_proc_exit+0x34/0x60 [dasd_mod]
[<000003ff7ef560c2>] dasd_exit+0x22/0xc0 [dasd_mod]
[<000003ff7ee5a26e>] dasd_init+0x26e/0x280 [dasd_mod]
[<000003fffe8ac9d0>] do_one_initcall+0x40/0x220
[<000003fffe9bc758>] do_init_module+0x78/0x260
[<000003fffe9bf3a6>] __do_sys_init_module+0x216/0x250
[<000003ffff37ac9e>] __do_syscall+0x24e/0x2d0
[<000003ffff38cca8>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003fffef7ea20>] __s390_indirect_jump_r14+0x0/0x10
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
While the cause is a user failure, the dasd module should handle the
situation more gracefully. One of the simplest solutions is to make
removal of the /proc/dasd* entries idempotent.
Signed-off-by: Miroslav Franc <mfranc@suse.cz>
[ sth: shortened if clause ]
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20241108133913.3068782-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable the list IOCTL to provide lists longer than one page (85 entries).
The list IOCTL now accepts any argument length in page granularity.
It fills the argument up to this length with entries until the list
ends. User space unaware of this enhancement will still receive one page
of data and an uv_rc 0x0100.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241104153609.1361388-1-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241104153609.1361388-1-seiden@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The pkey handlers should only check, if the length of a key blob is big
enough for holding a key. Larger blobs should be tolerated.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This new pkey handler module supports the conversion of
Ultravisor retrievable secrets to protected keys.
The new module pkey-uv.ko is able to retrieve and verify
protected keys backed up by the Ultravisor layer which is
only available within protected execution environment.
The module is only automatically loaded if there is the
UV CPU feature flagged as available. Additionally on module
init there is a check for protected execution environment
and for UV supporting retrievable secrets. Also if the kernel
is not running as a protected execution guest, the module
unloads itself with errno ENODEV.
The pkey UV module currently supports these Ultravisor
secrets and is able to retrieve a protected key for these
UV secret types:
- UV_SECRET_AES_128
- UV_SECRET_AES_192
- UV_SECRET_AES_256
- UV_SECRET_AES_XTS_128
- UV_SECRET_AES_XTS_256
- UV_SECRET_HMAC_SHA_256
- UV_SECRET_HMAC_SHA_512
- UV_SECRET_ECDSA_P256
- UV_SECRET_ECDSA_P384
- UV_SECRET_ECDSA_P521
- UV_SECRET_ECDSA_ED25519
- UV_SECRET_ECDSA_ED448
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is a static array of pkey handler kernel module names
used in case the pkey_handler_request_modules() is invoked.
This static array is walked through and if the module is not
already loaded a module_request() is performed.
This patch reworks the code to instead of unconditionally
building up a list of module names into the array, only the
pkey handler modules available based on the current kernel
config options are inserted.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rework the verification of protected keys by simple check
for the correct AES wrapping key verification pattern.
A protected key always carries the AES wrapping key
verification pattern within the blob. The old code really
used the protected key for an en/decrypt operation and by
doing so, verified the AES WK VP. But a much simpler and
more generic way is to extract the AES WK VP value from the
key and compare it with AES WK VP from a freshly created
dummy protected key. This also eliminates the limitation to
only be able to verify AES protected keys. With this change
any kind of known protected key can be verified.
Suggested-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The calculation of the length of a protected key based on
the protected key type is scattered over certain places within
the pkey code. By introducing a new inline function
pkey_keytype_to_size() this can be centralized and the calling
code can be reduced and simplified.
With this also comes a slight rework of the generation of
protected keys. Now the pkey_pckmo module is able to generate
all but ECC keys.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move include statement for zcrypt_api.h from the
codefiles to the zcrypt_ccamis.h header file.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a new IOCL number to support the new Retrieve Secret UVC for
user-space.
User-space provides the index of the secret (u16) to retrieve.
The uvdevice calls the Retrieve Secret UVC and copies the secret into
the provided buffer if it fits. To get the secret type, index, and size
user-space needs to call the List UVC first.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20241024062638.1465970-4-seiden@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the netiucv code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the vfio_ap code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/vmur code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/sclp_cpi_sys code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/sclp_ocf code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the char/vmlogrdr code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
