In preparation for KUnit testing and further improvements in fortify
failure reporting, split out the report and encode the function and access
failure (read or write overflow) into a single u8 argument. This mainly
ends up saving a tiny bit of space in the data segment. For a defconfig
with FORTIFY_SOURCE enabled:
$ size gcc/vmlinux.before gcc/vmlinux.after
text data bss dec hex filename
26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before
26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since commit 3570ee046c ("s390/smp: keep the original lowcore for
CPU 0"), there is no longer any architecture that needs to override
arch_call_rest_init().
Remove the weak wrapper around rest_init(), call rest_init() directly, and
make rest_init() static.
Link: https://lkml.kernel.org/r/aa10868bfb176eef4abb8bb4a710b85330792694.1706106183.git.geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the objtool decoder to know about the ERET[US] instructions
(type INSN_CONTEXT_SWITCH).
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-11-xin3.li@intel.com
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted a few more uses in comments/messages as well. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ariel Miculas <amiculas@cisco.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
the prototype.
(Side note: we should really add zalloc() for such cases.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3zAc
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixlet from Ingo Molnar:
"Address a GCC-14 warning: there's no real bug, but indeed the calloc
order doesn't match the prototype.
(Side note: we should really add zalloc() for such cases)"
* tag 'objtool-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix calloc call for new -Walloc-size
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GCC 14 introduces a new -Walloc-size included in -Wextra which errors out
like:
```
check.c: In function ‘cfi_alloc’:
check.c:294:33: error: allocation of insufficient size ‘1’ for type ‘struct cfi_state’ with size ‘320’ [-Werror=alloc-size]
294 | struct cfi_state *cfi = calloc(sizeof(struct cfi_state), 1);
| ^~~~~~
```
The calloc prototype is:
```
void *calloc(size_t nmemb, size_t size);
```
So, just swap the number of members and size arguments to match the prototype, as
we're initialising 1 struct of size `sizeof(struct ...)`. GCC then sees we're not
doing anything wrong.
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20231107205504.1470006-1-sam@gentoo.org
* Handle retrying/resuming page conversion hypercalls
* Make sure to use the (shockingly) reliable TSC in TDX guests
-----BEGIN PGP SIGNATURE-----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=FJ1Y
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The majority of this is a rework of the assembly and C wrappers that
are used to talk to the TDX module and VMM. This is a nice cleanup in
general but is also clearing the way for using this code when Linux is
the TDX VMM.
There are also some tidbits to make TDX guests play nicer with Hyper-V
and to take advantage the hardware TSC.
Summary:
- Refactor and clean up TDX hypercall/module call infrastructure
- Handle retrying/resuming page conversion hypercalls
- Make sure to use the (shockingly) reliable TSC in TDX guests"
[ TLA reminder: TDX is "Trust Domain Extensions", Intel's guest VM
confidentiality technology ]
* tag 'x86_tdx_for_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Mark TSC reliable
x86/tdx: Fix __noreturn build warning around __tdx_hypercall_failed()
x86/virt/tdx: Make TDX_MODULE_CALL handle SEAMCALL #UD and #GP
x86/virt/tdx: Wire up basic SEAMCALL functions
x86/tdx: Remove 'struct tdx_hypercall_args'
x86/tdx: Reimplement __tdx_hypercall() using TDX_MODULE_CALL asm
x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL
x86/tdx: Extend TDX_MODULE_CALL to support more TDCALL/SEAMCALL leafs
x86/tdx: Pass TDCALL/SEAMCALL input/output registers via a structure
x86/tdx: Rename __tdx_module_call() to __tdcall()
x86/tdx: Make macros of TDCALLs consistent with the spec
x86/tdx: Skip saving output regs when SEAMCALL fails with VMFailInvalid
x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro
x86/tdx: Retry partially-completed page conversion hypercalls
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping symbols
- Minor cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9U5x
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Misc fixes and cleanups:
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping
symbols
- Minor cleanups"
* tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Skip over mapping symbols in output from readelf
scripts/faddr2line: Use LLVM addr2line and readelf if LLVM=1
scripts/faddr2line: Don't filter out non-function symbols from readelf
objtool: Remove max symbol name length limitation
objtool: Propagate early errors
objtool: Use 'the fallthrough' pseudo-keyword
x86/speculation, objtool: Use absolute relocations for annotations
x86/unwind/orc: Remove redundant initialization of 'mid' pointer in __orc_find()
machinery and other, general cleanups to the hw mitigations code,
by Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=E7c4
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- A bunch of improvements, cleanups and fixlets to the SRSO mitigation
machinery and other, general cleanups to the hw mitigations code, by
Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
* tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/retpoline: Document some thunk handling aspects
x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN
x86/callthunks: Delete unused "struct thunk_desc"
x86/vdso: Run objtool on vdso32-setup.o
objtool: Fix return thunk patching in retpolines
x86/srso: Remove unnecessary semicolon
x86/pti: Fix kernel warnings for pti= and nopti cmdline options
x86/calldepth: Rename __x86_return_skl() to call_depth_return_thunk()
x86/nospec: Refactor UNTRAIN_RET[_*]
x86/rethunk: Use SYM_CODE_START[_LOCAL]_NOALIGN macros
x86/srso: Disentangle rethunk-dependent options
x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block
x86/bugs: Remove default case for fully switched enums
x86/srso: Remove 'pred_cmd' label
x86/srso: Unexport untraining functions
x86/srso: Improve i-cache locality for alias mitigation
x86/srso: Fix unret validation dependencies
x86/srso: Fix vulnerability reporting for missing microcode
x86/srso: Print mitigation for retbleed IBPB case
x86/srso: Print actual mitigation if requested mitigation isn't possible
...
Here's the bcachefs filesystem pull request.
One new patch since last week: the exportfs constants ended up
conflicting with other filesystems that are also getting added to the
global enum, so switched to new constants picked by Amir.
I'll also be sending another pull request later on in the cycle bringing
things up to date my master branch that people are currently running;
that will be restricted to fs/bcachefs/, naturally.
Testing - fstests as well as the bcachefs specific tests in ktest:
https://evilpiepirate.org/~testdashboard/ci?branch=bcachefs-for-upstream
It's also been soaking in linux-next, which resulted in a whole bunch of
smatch complaints and fixes and a patch or two from Kees.
The only new non fs/bcachefs/ patch is the objtool patch that adds
bcachefs functions to the list of noreturns. The patch that exports
osq_lock() has been dropped for now, per Ingo.
Prereq patch list:
faf1dce852 objtool: Add bcachefs noreturns
73badee428 lib/generic-radix-tree.c: Add peek_prev()
9492261ff2 lib/generic-radix-tree.c: Don't overflow in peek()
0fb5d567f5 MAINTAINERS: Add entry for generic-radix-tree
b414e8ecd4 closures: Add a missing include
48b7935722 closures: closure_nr_remaining()
ced58fc7ab closures: closure_wait_event()
bd0d22e41e MAINTAINERS: Add entry for closures
8c8d2d9670 bcache: move closures to lib/
957e48087d locking: export contention tracepoints for bcachefs six locks
21db931445 lib: Export errname
83feeb1955 lib/string_helpers: string_get_size() now returns characters wrote
7d672f4094 stacktrace: Export stack_trace_save_tsk
771eb4fe8b fs: factor out d_mark_tmpfile()
2b69987be5 sched: Add task_struct->faults_disabled_mapping
-----BEGIN PGP SIGNATURE-----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=g+ia
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2023-10-30' of https://evilpiepirate.org/git/bcachefs
Pull initial bcachefs updates from Kent Overstreet:
"Here's the bcachefs filesystem pull request.
One new patch since last week: the exportfs constants ended up
conflicting with other filesystems that are also getting added to the
global enum, so switched to new constants picked by Amir.
The only new non fs/bcachefs/ patch is the objtool patch that adds
bcachefs functions to the list of noreturns. The patch that exports
osq_lock() has been dropped for now, per Ingo"
* tag 'bcachefs-2023-10-30' of https://evilpiepirate.org/git/bcachefs: (2781 commits)
exportfs: Change bcachefs fid_type enum to avoid conflicts
bcachefs: Refactor memcpy into direct assignment
bcachefs: Fix drop_alloc_keys()
bcachefs: snapshot_create_lock
bcachefs: Fix snapshot skiplists during snapshot deletion
bcachefs: bch2_sb_field_get() refactoring
bcachefs: KEY_TYPE_error now counts towards i_sectors
bcachefs: Fix handling of unknown bkey types
bcachefs: Switch to unsafe_memcpy() in a few places
bcachefs: Use struct_size()
bcachefs: Correctly initialize new buckets on device resize
bcachefs: Fix another smatch complaint
bcachefs: Use strsep() in split_devs()
bcachefs: Add iops fields to bch_member
bcachefs: Rename bch_sb_field_members -> bch_sb_field_members_v1
bcachefs: New superblock section members_v2
bcachefs: Add new helper to retrieve bch_member from sb
bcachefs: bucket_lock() is now a sleepable lock
bcachefs: fix crc32c checksum merge byte order problem
bcachefs: Fix bch2_inode_delete_keys()
...
With CONFIG_RETHUNK enabled, the compiler replaces every RET with a tail
call to a return thunk ('JMP __x86_return_thunk'). Objtool annotates
all such return sites so they can be patched during boot by
apply_returns().
The implementation of __x86_return_thunk() is just a bare RET. It's
only meant to be used temporarily until apply_returns() patches all
return sites with either a JMP to another return thunk or an actual RET.
Removing the .text..__x86.return_thunk section would break objtool's
detection of return sites in retpolines. Since retpolines and return
thunks would land in the same section, the compiler no longer uses
relocations for the intra-section jumps between the retpolines and the
return thunk, causing objtool to overlook them.
As a result, none of the retpolines' return sites would get patched.
Each one stays at 'JMP __x86_return_thunk', effectively a bare RET.
Fix it by teaching objtool to detect when a non-relocated jump target is
a return thunk (or retpoline).
[ bp: Massage the commit message now that the offending commit
removing the .text..__x86.return_thunk section has been zapped.
Still keep the objtool change here as it makes objtool more robust
wrt handling such intra-TU jumps without relocations, should some
toolchain and/or config generate them in the future. ]
Reported-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231012024737.eg5phclogp67ik6x@treble
If one of the symbols processed by read_symbols() happens to have a
.cold variant with a name longer than objtool's MAX_NAME_LEN limit, the
build fails.
Avoid this problem by just using strndup() to copy the parent function's
name, rather than strncpy()ing it onto the stack.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/41e94cfea1d9131b758dd637fecdeacd459d4584.1696355111.git.aplattner@nvidia.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
If objtool runs into a problem that causes it to exit early, the overall
tool still returns a status code of 0, which causes the build to
continue as if nothing went wrong.
Note this only affects early errors, as later errors are still ignored
by check().
Fixes: b51277eb97 ("objtool: Ditch subcommands")
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/cb6a28832d24b2ebfafd26da9abb95f874c83045.1696355111.git.aplattner@nvidia.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
LKP reported below build warning:
vmlinux.o: warning: objtool: __tdx_hypercall+0x128: __tdx_hypercall_failed() is missing a __noreturn annotation
The __tdx_hypercall_failed() function definition already has __noreturn
annotation, but it turns out the __noreturn must be annotated to the
function declaration.
PeterZ explains:
"FWIW, the reason being that...
The point of noreturn is that the caller should know to stop generating
code. For that the declaration needs the attribute, because call sites
typically do not have access to the function definition in C."
Add __noreturn annotation to the declaration of __tdx_hypercall_failed()
to fix. It's not a bad idea to document the __noreturn nature at the
definition site either, so keep the annotation at the definition.
Note <asm/shared/tdx.h> is also included by TDX related assembly files.
Include <linux/compiler_attributes.h> only in case of !__ASSEMBLY__
otherwise compiling assembly file would trigger build error.
Also, following the objtool documentation, add __tdx_hypercall_failed()
to "tools/objtool/noreturns.h".
Fixes: c641cfb5c1 ("x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230918041858.331234-1-kai.huang@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202309140828.9RdmlH2Z-lkp@intel.com/
Cold functions and their non-cold counterparts can use _THIS_IP_ to
reference each other. Don't warn about !ENDBR in that case.
Note that for GCC this is currently irrelevant in light of the following
commit
c27cd083cf ("Compiler attributes: GCC cold function alignment workarounds")
which disabled cold functions in the kernel. However this may still be
possible with Clang.
Fixes several warnings like the following:
drivers/scsi/bnx2i/bnx2i.prelink.o: warning: objtool: bnx2i_hw_ep_disconnect+0x19d: relocation to !ENDBR: bnx2i_hw_ep_disconnect.cold+0x0
drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr4_event.cold+0x28: relocation to !ENDBR: ipvlan_addr4_event+0xda
drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr6_event.cold+0x26: relocation to !ENDBR: ipvlan_addr6_event+0xb7
drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_set_ringparam.cold+0x17: relocation to !ENDBR: tg3_set_ringparam+0x115
drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_self_test.cold+0x17: relocation to !ENDBR: tg3_self_test+0x2e1
drivers/target/iscsi/cxgbit/cxgbit.prelink.o: warning: objtool: __cxgbit_free_conn.cold+0x24: relocation to !ENDBR: __cxgbit_free_conn+0xfb
net/can/can.prelink.o: warning: objtool: can_rx_unregister.cold+0x2c: relocation to !ENDBR: can_rx_unregister+0x11b
drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_spq_post+0xc0: relocation to !ENDBR: qed_spq_post.cold+0x9a
drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_iwarp_ll2_comp_syn_pkt.cold+0x12f: relocation to !ENDBR: qed_iwarp_ll2_comp_syn_pkt+0x34b
net/tipc/tipc.prelink.o: warning: objtool: tipc_nametbl_publish.cold+0x21: relocation to !ENDBR: tipc_nametbl_publish+0xa6
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/d8f1ab6a23a6105bc023c132b105f245c7976be6.1694476559.git.jpoimboe@kernel.org
For stack-validation of a frame-pointer build, objtool validates that
every CALL instruction is preceded by a frame-setup. The new SRSO
return thunks violate this with their RSB stuffing trickery.
Extend the __fentry__ exception to also cover the embedded_insn case
used for this. This cures:
vmlinux.o: warning: objtool: srso_untrain_ret+0xd: call without frame pointer save/setup
Fixes: 4ae68b26c3 ("objtool/x86: Fix SRSO mess")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230816115921.GH980931@hirez.programming.kicks-ass.net
Rename the original retbleed return thunk and untrain_ret to
retbleed_return_thunk() and retbleed_untrain_ret().
No functional changes.
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.909378169@infradead.org
Use the existing configurable return thunk. There is absolute no
justification for having created this __x86_return_thunk alternative.
To clarify, the whole thing looks like:
Zen3/4 does:
srso_alias_untrain_ret:
nop2
lfence
jmp srso_alias_return_thunk
int3
srso_alias_safe_ret: // aliasses srso_alias_untrain_ret just so
add $8, %rsp
ret
int3
srso_alias_return_thunk:
call srso_alias_safe_ret
ud2
While Zen1/2 does:
srso_untrain_ret:
movabs $foo, %rax
lfence
call srso_safe_ret (jmp srso_return_thunk ?)
int3
srso_safe_ret: // embedded in movabs instruction
add $8,%rsp
ret
int3
srso_return_thunk:
call srso_safe_ret
ud2
While retbleed does:
zen_untrain_ret:
test $0xcc, %bl
lfence
jmp zen_return_thunk
int3
zen_return_thunk: // embedded in the test instruction
ret
int3
Where Zen1/2 flush the BTB entry using the instruction decoder trick
(test,movabs) Zen3/4 use BTB aliasing. SRSO adds a return sequence
(srso_safe_ret()) which forces the function return instruction to
speculate into a trap (UD2). This RET will then mispredict and
execution will continue at the return site read from the top of the
stack.
Pick one of three options at boot (evey function can only ever return
once).
[ bp: Fixup commit message uarch details and add them in a comment in
the code too. Add a comment about the srso_select_mitigation()
dependency on retbleed_select_mitigation(). Add moar ifdeffery for
32-bit builds. Add a dummy srso_untrain_ret_alias() definition for
32-bit alternatives needing the symbol. ]
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.842775684@infradead.org
Objtool --rethunk does two things:
- it collects all (tail) call's of __x86_return_thunk and places them
into .return_sites. These are typically compiler generated, but
RET also emits this same.
- it fudges the validation of the __x86_return_thunk symbol; because
this symbol is inside another instruction, it can't actually find
the instruction pointed to by the symbol offset and gets upset.
Because these two things pertained to the same symbol, there was no
pressing need to separate these two separate things.
However, alas, along comes SRSO and more crazy things to deal with
appeared.
The SRSO patch itself added the following symbol names to identify as
rethunk:
'srso_untrain_ret', 'srso_safe_ret' and '__ret'
Where '__ret' is the old retbleed return thunk, 'srso_safe_ret' is a
new similarly embedded return thunk, and 'srso_untrain_ret' is
completely unrelated to anything the above does (and was only included
because of that INT3 vs UD2 issue fixed previous).
Clear things up by adding a second category for the embedded instruction
thing.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.704502245@infradead.org
The linker script arch/x86/kernel/vmlinux.lds.S matches the thunk
sections ".text.__x86.*" from arch/x86/lib/retpoline.S as follows:
.text {
[...]
TEXT_TEXT
[...]
__indirect_thunk_start = .;
*(.text.__x86.*)
__indirect_thunk_end = .;
[...]
}
Macro TEXT_TEXT references TEXT_MAIN which normally expands to only
".text". However, with CONFIG_LTO_CLANG, TEXT_MAIN becomes
".text .text.[0-9a-zA-Z_]*" which wrongly matches also the thunk
sections. The output layout is then different than expected. For
instance, the currently defined range [__indirect_thunk_start,
__indirect_thunk_end] becomes empty.
Prevent the problem by using ".." as the first separator, for example,
".text..__x86.indirect_thunk". This pattern is utilized by other
explicit section names which start with one of the standard prefixes,
such as ".text" or ".data", and that need to be individually selected in
the linker script.
[ nathan: Fix conflicts with SRSO and fold in fix issue brought up by
Andrew Cooper in post-review:
https://lore.kernel.org/20230803230323.1478869-1-andrew.cooper3@citrix.com ]
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230711091952.27944-2-petr.pavlu@suse.com
Add a mitigation for the speculative return address stack overflow
vulnerability found on AMD processors.
The mitigation works by ensuring all RET instructions speculate to
a controlled location, similar to how speculation is controlled in the
retpoline sequence. To accomplish this, the __x86_return_thunk forces
the CPU to mispredict every function return using a 'safe return'
sequence.
To ensure the safety of this mitigation, the kernel must ensure that the
safe return sequence is itself free from attacker interference. In Zen3
and Zen4, this is accomplished by creating a BTB alias between the
untraining function srso_untrain_ret_alias() and the safe return
function srso_safe_ret_alias() which results in evicting a potentially
poisoned BTB entry and using that safe one for all function returns.
In older Zen1 and Zen2, this is accomplished using a reinterpretation
technique similar to Retbleed one: srso_untrain_ret() and
srso_safe_ret().
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Function elf_open_read() only zero initializes the initial part of
allocated struct elf; num_relocs member was recently added outside the
zeroed part so that it was left uninitialized, resulting in build failures
on some systems.
The partial initialization is a relic of times when struct elf had large
hash tables embedded. This is no longer the case so remove the trap and
initialize the whole structure instead.
Fixes: eb0481bbc4 ("objtool: Fix reloc_hash size")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230629102051.42E8360467@lion.mk-sys.cz
The objtool merge in commit 6f612579be ("Merge tag 'objtool-core ...")
generated a semantic conflict that was not resolved.
The btrfs_assertfail() entry was removed from the noreturn list in
commit b831306b3b ("btrfs: print assertion failure report and stack
trace from the same line") because btrfs_assertfail() was changed from a
noreturn function into a macro.
The noreturn list was then moved from check.c to noreturns.h in commit
6245ce4ab6 ("objtool: Move noreturn function list to separate file"),
and should be removed from that post-merge as well.
Do it explicitly.
Cc: David Sterba <dsterba@suse.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel, DWARF
creates almost 200 million relocations, ballooning objtool's peak heap
usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce objtool's
peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
- Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output.
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
- Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
- Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
- Fixes for modern stack canary handling
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=uNnc
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
This KUnit update for Linux 6.5-rc1 consists of:
- kunit_add_action() API to defer a call until test exit.
- Update document to add kunit_add_action() usage notes.
- Changes to always run cleanup from a test kthread.
- Documentation updates to clarify cleanup usage
- assertions should not be used in cleanup
- Documentation update to clearly indicate that exit
functions should run even if init fails
- Several fixes and enhancements to existing tests.
-----BEGIN PGP SIGNATURE-----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=rYT5
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- kunit_add_action() API to defer a call until test exit
- Update document to add kunit_add_action() usage notes
- Changes to always run cleanup from a test kthread
- Documentation updates to clarify cleanup usage (assertions should not
be used in cleanup)
- Documentation update to clearly indicate that exit functions should
run even if init fails
- Several fixes and enhancements to existing tests
* tag 'linux-kselftest-kunit-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: Add source tree entry for kunit
Documentation: kunit: Rename references to kunit_abort()
kunit: Move kunit_abort() call out of kunit_do_failed_assertion()
kunit: Fix obsolete name in documentation headers (func->action)
Documentation: Kunit: add MODULE_LICENSE to sample code
kunit: Update kunit_print_ok_not_ok function
kunit: Fix reporting of the skipped parameterized tests
kunit/test: Add example test showing parameterized testing
Documentation: kunit: Add usage notes for kunit_add_action()
kunit: kmalloc_array: Use kunit_add_action()
kunit: executor_test: Use kunit_add_action()
kunit: Add kunit_add_action() to defer a call until test exit
kunit: example: Provide example exit functions
Documentation: kunit: Warn that exit functions run even if init fails
Documentation: kunit: Note that assertions should not be used in cleanup
kunit: Always run cleanup from a test kthread
Documentation: kunit: Modular tests should not depend on KUNIT=y
kunit: tool: undo type subscripts for subprocess.Popen
of the ERMS CPUID flag. AMD decoupled them with a BIOS setting so decouple
that dependency in the kernel code too
- Teach the alternatives machinery to handle relocations
- Make debug_alternative accept flags in order to see only that set of
patching done one is interested in
- Other fixes, cleanups and optimizations to the patching code
-----BEGIN PGP SIGNATURE-----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=mH38
-----END PGP SIGNATURE-----
Merge tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 instruction alternatives updates from Borislav Petkov:
- Up until now the Fast Short Rep Mov optimizations implied the
presence of the ERMS CPUID flag. AMD decoupled them with a BIOS
setting so decouple that dependency in the kernel code too
- Teach the alternatives machinery to handle relocations
- Make debug_alternative accept flags in order to see only that set of
patching done one is interested in
- Other fixes, cleanups and optimizations to the patching code
* tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: PAUSE is not a NOP
x86/alternatives: Add cond_resched() to text_poke_bp_batch()
x86/nospec: Shorten RESET_CALL_DEPTH
x86/alternatives: Add longer 64-bit NOPs
x86/alternatives: Fix section mismatch warnings
x86/alternative: Optimize returns patching
x86/alternative: Complicate optimize_nops() some more
x86/alternative: Rewrite optimize_nops() some
x86/lib/memmove: Decouple ERMS from FSRM
x86/alternative: Support relocations in alternatives
x86/alternative: Make debug-alternative selective
Assertions reports are split into two parts, the exact file and location
of the condition and then the stack trace printed from
btrfs_assertfail(). This means all the stack traces report the same line
and this is what's typically reported by various tools, making it harder
to distinguish the reports.
[403.2467] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4259
[403.2479] ------------[ cut here ]------------
[403.2484] kernel BUG at fs/btrfs/messages.c:259!
[403.2488] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[403.2493] CPU: 2 PID: 23202 Comm: umount Not tainted 6.2.0-rc4-default+ #67
[403.2499] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[403.2509] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs]
...
[403.2595] Call Trace:
[403.2598] <TASK>
[403.2601] btrfs_free_block_groups.cold+0x52/0xae [btrfs]
[403.2608] close_ctree+0x6c2/0x761 [btrfs]
[403.2613] ? __wait_for_common+0x2b8/0x360
[403.2618] ? btrfs_cleanup_one_transaction.cold+0x7a/0x7a [btrfs]
[403.2626] ? mark_held_locks+0x6b/0x90
[403.2630] ? lockdep_hardirqs_on_prepare+0x13d/0x200
[403.2636] ? __call_rcu_common.constprop.0+0x1ea/0x3d0
[403.2642] ? trace_hardirqs_on+0x2d/0x110
[403.2646] ? __call_rcu_common.constprop.0+0x1ea/0x3d0
[403.2652] generic_shutdown_super+0xb0/0x1c0
[403.2657] kill_anon_super+0x1e/0x40
[403.2662] btrfs_kill_super+0x25/0x30 [btrfs]
[403.2668] deactivate_locked_super+0x4c/0xc0
By making btrfs_assertfail a macro we'll get the same line number for
the BUG output:
[63.5736] assertion failed: 0, in fs/btrfs/super.c:1572
[63.5758] ------------[ cut here ]------------
[63.5782] kernel BUG at fs/btrfs/super.c:1572!
[63.5807] invalid opcode: 0000 [#2] PREEMPT SMP KASAN
[63.5831] CPU: 0 PID: 859 Comm: mount Tainted: G D 6.3.0-rc7-default+ #2062
[63.5868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
[63.5905] RIP: 0010:btrfs_mount+0x24/0x30 [btrfs]
[63.5964] RSP: 0018:ffff88800e69fcd8 EFLAGS: 00010246
[63.5982] RAX: 000000000000002d RBX: ffff888008fc1400 RCX: 0000000000000000
[63.6004] RDX: 0000000000000000 RSI: ffffffffb90fd868 RDI: ffffffffbcc3ff20
[63.6026] RBP: ffffffffc081b200 R08: 0000000000000001 R09: ffff88800e69fa27
[63.6046] R10: ffffed1001cd3f44 R11: 0000000000000001 R12: ffff888005a3c370
[63.6062] R13: ffffffffc058e830 R14: 0000000000000000 R15: 00000000ffffffff
[63.6081] FS: 00007f7b3561f800(0000) GS:ffff88806c600000(0000) knlGS:0000000000000000
[63.6105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63.6120] CR2: 00007fff83726e10 CR3: 0000000002a9e000 CR4: 00000000000006b0
[63.6137] Call Trace:
[63.6143] <TASK>
[63.6148] legacy_get_tree+0x80/0xd0
[63.6158] vfs_get_tree+0x43/0x120
[63.6166] do_new_mount+0x1f3/0x3d0
[63.6176] ? do_add_mount+0x140/0x140
[63.6187] ? cap_capable+0xa4/0xe0
[63.6197] path_mount+0x223/0xc10
This comes at a cost of bloating the final btrfs.ko module due all the
inlining, as long as assertions are compiled in. This is a must for
debugging builds but this is often enabled on release builds too.
Release build:
text data bss dec hex filename
1251676 20317 16088 1288081 13a791 pre/btrfs.ko
1260612 29473 16088 1306173 13ee3d post/btrfs.ko
DELTA: +8936
CC: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Objtool doesn't use DWARF at all, and the DWARF sections' data take up a
lot of memory. Skip reading them.
Note this only skips the DWARF base sections, not the rela sections.
The relas are needed because their symbol references may need to be
reindexed if any local symbols get added by elf_create_symbol().
Also note the DWARF data will eventually be read by libelf anyway, when
writing the object file. But that's fine, the goal here is to reduce
*peak* memory usage, and the previous patch (which freed insn memory)
gave some breathing room. So the allocation gets shifted to a later
time, resulting in lower peak memory usage.
With allyesconfig + CONFIG_DEBUG_INFO:
- Before: peak heap memory consumption: 29.93G
- After: peak heap memory consumption: 25.47G
Link: https://lore.kernel.org/r/52a9698835861dd35f2ec35c49f96d0bb39fb177.1685464332.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
When creating an annotation section, allocate the reloc section data at
the beginning. This simplifies the data model a bit and also saves
memory due to the removal of malloc() in elf_rebuild_reloc_section().
With allyesconfig + CONFIG_DEBUG_INFO:
- Before: peak heap memory consumption: 53.49G
- After: peak heap memory consumption: 49.02G
Link: https://lore.kernel.org/r/048e908f3ede9b66c15e44672b6dda992b1dae3e.1685464332.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The GElf_Rel[a] structs have more similarities than differences. It's
safe to hard-code the assumptions about their shared fields as they will
never change. Consolidate their handling where possible, getting rid of
duplicated code.
Also, at least for now we only ever create rela sections, so simplify
the relocation creation code to be rela-only.
Link: https://lore.kernel.org/r/dcabf6df400ca500ea929f1e4284f5e5ec0b27c8.1685464332.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
- The term "reloc" is overloaded to mean both "an instance of struct
reloc" and "a reloc section". Change the latter to "rsec".
- For variable names, use "sec" for regular sections and "rsec" for rela
sections to prevent them getting mixed up.
- For struct reloc variables, use "reloc" instead of "rel" everywhere
for consistency.
Link: https://lore.kernel.org/r/8b790e403df46f445c21003e7893b8f53b99a6f3.1685464332.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
There are several places where warnings variables are not needed,
remove them and directly return 0.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230530075649.21661-1-luhongfei@vivo.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
This is a hack, but it works for now.
Problem is, exc_double_fault() may or may not return, depending on
whether CONFIG_X86_ESPFIX64 is set. But objtool has no visibility to
the kernel config.
"Fix" it by silencing the exc_double_fault() __noreturn warning.
This removes the following warning:
vmlinux.o: warning: objtool: xenpv_exc_double_fault+0xd: exc_double_fault() is missing a __noreturn annotation
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/a45b085071d3a7d049a20f9e78754452336ecbe8.1681853186.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Unreachable instruction warnings are limited to once per object file.
That no longer makes sense for vmlinux validation, which might have
more unreachable instructions lurking in other places. Change it to
once per function.
Note this affects some other (much rarer) non-fatal warnings as well.
In general I think one-warning-per-function makes sense, as related
warnings can accumulate quickly and we want to eventually get back to
failing the build with -Werror anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/9d38f881bfc34e031c74e4e90064ccb3e49f599a.1681853186.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
A little while ago someone (Kirill) ran into the whole 'alternatives don't
do relocations nonsense' again and I got annoyed enough to actually look
at the code.
Since the whole alternative machinery already fully decodes the
instructions it is simple enough to adjust immediates and displacement
when needed. Specifically, the immediates for IP modifying instructions
(JMP, CALL, Jcc) and the displacement for RIP-relative instructions.
[ bp: Massage comment some more and get rid of third loop in
apply_relocation(). ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230208171431.313857925@infradead.org
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
-----BEGIN PGP SIGNATURE-----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=Jt7p
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly core changes and cleanups, some notable fixes and two
performance improvements in directory logging.
The IO path cleanups are removing or refactoring old code, scrub main
loop has been completely rewritten also refactoring old code.
There are some changes to non-btrfs code, mostly trivial, the cgroup
punt bio logic is only moved from generic code.
Performance improvements:
- improve logging changes in a directory during one transaction,
avoid iterating over items and reduce lock contention (fsync time
4x lower)
- when logging directory entries during one transaction, reduce
locking of subvolume trees by checking tree-log instead
(improvement in throughput and latency for concurrent access to a
subvolume)
Notable fixes:
- dev-replace:
- properly honor read mode when requested to avoid reading from
source device
- target device won't be used for eventual read repair, this is
unreliable for NODATASUM files
- when there are unpaired (and unrepairable) metadata during
replace, exit early with error and don't try to finish whole
operation
- scrub ioctl properly rejects unknown flags
- fix global block reserve calculations
- fix partial direct io write when there's a page fault in the
middle, iomap will try to continue with partial request but the
btrfs part did not match that, this can lead to zeros written
instead of data
Core changes:
- io path:
- continued cleanups and refactoring around bio handling
- extent io submit path simplifications and cleanups
- flush write path simplifications and cleanups
- rework logic of passing sync mode of bio, with further cleanups
- rewrite scrub code flow, restructure how the stripes are enumerated
and verified in a more unified way
- allow to set lower threshold for block group reclaim in debug mode
to aid zoned mode testing
- remove obsolete time-based delayed ref throttling logic when
truncating items
- DREW locks are not using percpu variables anymore
- more warning fixes (-Wmaybe-uninitialized)
- u64 division simplifications
- error handling improvements
Non-btrfs code changes:
- push cgroup punt bio logic to btrfs code (there was no other user
of that), the functionality can be now selected separately by
BLK_CGROUP_PUNT_BIO
- crc32c_impl removed after removing last uses in btrfs code
- add btrfs_assertfail() to objtool table"
* tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: mark btrfs_assertfail() __noreturn
btrfs: fix uninitialized variable warnings
btrfs: use log root when iterating over index keys when logging directory
btrfs: avoid iterating over all indexes when logging directory
btrfs: dev-replace: error out if we have unrepaired metadata error during
btrfs: remove pointless loop at btrfs_get_next_valid_item()
btrfs: scrub: reject unsupported scrub flags
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
btrfs: remove unused raid56 functions which were dedicated for scrub
btrfs: scrub: remove scrub_bio structure
btrfs: scrub: remove scrub_block and scrub_sector structures
btrfs: scrub: remove the old scrub recheck code
btrfs: scrub: remove the old writeback infrastructure
btrfs: scrub: remove scrub_parity structure
btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub
btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
btrfs: scrub: introduce helper to queue a stripe for scrub
btrfs: scrub: introduce error reporting functionality for scrub_stripe
btrfs: scrub: introduce a writeback helper for scrub_stripe
...
still a fair amount going on, including:
- Reorganizing the architecture-specific documentation under
Documentation/arch. This makes the structure match the source directory
and helps to clean up the mess that is the top-level Documentation
directory a bit. This work creates the new directory and moves x86 and
most of the less-active architectures there. The current plan is to move
the rest of the architectures in 6.5, with the patches going through the
appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation.
- A new "Kernel contribution maturity model" document from Ted.
- A new tutorial on quickly building a trimmed kernel from Thorsten.
Plus the usual set of updates and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmRGze0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y/VsH/RyWqinorRVFZmHqRJMRhR0j7hE2pAgK5prE
dGXYVtHHNQ+25thNaqhZTOLYFbSX6ii2NG7sLRXmyOTGIZrhUCFFXCHkuq4ZUypR
gJpMUiKQVT4dhln3gIZ0k09NSr60gz8UTcq895N9UFpUdY1SCDhbCcLc4uXTRajq
NrdgFaHWRkPb+gBRbXOExYm75DmCC6Ny5AyGo2rXfItV//ETjWIJVQpJhlxKrpMZ
3LgpdYSLhEFFnFGnXJ+EAPJ7gXDi2Tg5DuPbkvJyFOTouF3j4h8lSS9l+refMljN
xNRessv+boge/JAQidS6u8F2m2ESSqSxisv/0irgtKIMJwXaoX4=
=1//8
-----END PGP SIGNATURE-----
Merge tag 'docs-6.4' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Commit volume in documentation is relatively low this time, but there
is still a fair amount going on, including:
- Reorganize the architecture-specific documentation under
Documentation/arch
This makes the structure match the source directory and helps to
clean up the mess that is the top-level Documentation directory a
bit. This work creates the new directory and moves x86 and most of
the less-active architectures there.
The current plan is to move the rest of the architectures in 6.5,
with the patches going through the appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation
- A new "Kernel contribution maturity model" document from Ted
- A new tutorial on quickly building a trimmed kernel from Thorsten
Plus the usual set of updates and fixes"
* tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits)
media: Adjust column width for pdfdocs
media: Fix building pdfdocs
docs: clk: add documentation to log which clocks have been disabled
docs: trace: Fix typo in ftrace.rst
Documentation/process: always CC responsible lists
docs: kmemleak: adjust to config renaming
ELF: document some de-facto PT_* ABI quirks
Documentation: arm: remove stih415/stih416 related entries
docs: turn off "smart quotes" in the HTML build
Documentation: firmware: Clarify firmware path usage
docs/mm: Physical Memory: Fix grammar
Documentation: Add document for false sharing
dma-api-howto: typo fix
docs: move m68k architecture documentation under Documentation/arch/
docs: move parisc documentation under Documentation/arch/
docs: move ia64 architecture docs under Documentation/arch/
docs: Move arc architecture docs under Documentation/arch/
docs: move nios2 documentation under Documentation/arch/
docs: move openrisc documentation under Documentation/arch/
docs: move superh documentation under Documentation/arch/
...
The old 'copy_user_generic_unrolled' function was oddly implemented for
largely historical reasons: it had been largely based on the uncached
copy case, which has some other concerns.
For example, the __copy_user_nocache() function uses 'movnti' for the
destination stores, and those want the destination to be aligned. In
contrast, the regular copy function doesn't really care, and trying to
align things only complicates matters.
Also, like the clear_user function, the copy function had some odd
handling of the repeat counts, complicating the exception handling for
no really good reason. So as with clear_user, just write it to keep all
the byte counts in the %rcx register, exactly like the 'rep movs'
functionality that this replaces.
Unlike a real 'rep movs', we do allow for this to trash a few temporary
registers to not have to unnecessarily save/restore registers on the
stack.
And like the clearing case, rename this to what it now clearly is:
'rep_movs_alternative', and make it one coherent function, so that it
shows up as such in profiles (instead of the odd split between
"copy_user_generic_unrolled" and "copy_user_short_string", the latter of
which was not about strings at all, and which was shared with the
uncached case).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The old version was oddly written to have the repeat count in multiple
registers. So instead of taking advantage of %rax being zero, it had
some sub-counts in it. All just for a "single word clearing" loop,
which isn't even efficient to begin with.
So get rid of those games, and just keep all the state in the same
registers we got it in (and that we should return things in). That not
only makes this act much more like 'rep stos' (which this function is
replacing), but makes it much easier to actually do the obvious loop
unrolling.
Also rename the function from the now nonsensical 'clear_user_original'
to what it now clearly is: 'rep_stos_alternative'.
End result: if we don't have a fast 'rep stosb', at least we can have a
fast fallback for it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This does the same thing for the user copies as commit 0db7058e8e
("x86/clear_user: Make it faster") did for clear_user(). In other
words, it inlines the "rep movs" case when X86_FEATURE_FSRM is set,
avoiding the function call entirely.
In order to do that, it makes the calling convention for the out-of-line
case ("copy_user_generic_unrolled") match the 'rep movs' calling
convention, although it does also end up clobbering a number of
additional registers.
Also, to simplify code sharing in the low-level assembly with the
__copy_user_nocache() function (that uses the normal C calling
convention), we end up with a kind of mixed return value for the
low-level asm code: it will return the result in both %rcx (to work as
an alternative for the 'rep movs' case), _and_ in %rax (for the nocache
case).
We could avoid this by wrapping __copy_user_nocache() callers in an
inline asm, but since the cost is just an extra register copy, it's
probably not worth it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is preparatory work for inlining the 'rep movs' case, but also a
cleanup. The __copy_user_nocache() function was mis-used by the rdma
code to do uncached kernel copies that don't actually want user copies
at all, and as a result doesn't want the stac/clac either.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The modern target to use is FSRS (Fast Short REP STOS), and the other
cases should only be used for bigger areas (ie mainly things like page
clearing).
Note! This changes the conditional for the inlining from FSRM ("fast
short rep movs") to FSRS ("fast short rep stos").
We'll have a separate fixup for AMD microarchitectures that have a good
'rep stosb' yet do not set the new Intel-specific FSRS bit (because FSRM
was there first).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Annotate the function prototype and definition as noreturn to prevent
objtool warnings like:
vmlinux.o: warning: objtool: hyperv_init+0x55c: unreachable instruction
Also, as per Josh's suggestion, add it to the global_noreturns list.
As a comparison, an objdump output without the annotation:
[...]
1b63: mov $0x1,%esi
1b68: xor %edi,%edi
1b6a: callq ffffffff8102f680 <hv_ghcb_terminate>
1b6f: jmpq ffffffff82f217ec <hyperv_init+0x9c> # unreachable
1b74: cmpq $0xffffffffffffffff,-0x702a24(%rip)
[...]
Now, after adding the __noreturn to the function prototype:
[...]
17df: callq ffffffff8102f6d0 <hv_ghcb_negotiate_protocol>
17e4: test %al,%al
17e6: je ffffffff82f21bb9 <hyperv_init+0x469>
[...] <many insns>
1bb9: mov $0x1,%esi
1bbe: xor %edi,%edi
1bc0: callq ffffffff8102f680 <hv_ghcb_terminate>
1bc5: nopw %cs:0x0(%rax,%rax,1) # end of function
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/32453a703dfcf0d007b473c9acbf70718222b74b.1681342859.git.jpoimboe@kernel.org
If a global function doesn't return, and its prototype has the
__noreturn attribute, its weak counterpart must also not return so that
it matches the prototype and meets call site expectations.
To properly follow the compiled control flow at the call sites, change
the global_noreturns check to include both global and weak functions.
On the other hand, if a weak function isn't in global_noreturns, assume
the prototype doesn't have __noreturn. Even if the weak function
doesn't return, call sites treat it like a returnable function.
Fixes the following warning:
kernel/sched/build_policy.o: warning: objtool: do_idle() falls through to next function play_idle_precise()
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/ede3460d63f4a65d282c86f1175bd2662c2286ba.1681342859.git.jpoimboe@kernel.org
In preparation for improving objtool's handling of weak noreturn
functions, mark start_kernel(), arch_call_rest_init(), and rest_init()
__noreturn.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/7194ed8a989a85b98d92e62df660f4a90435a723.1681342859.git.jpoimboe@kernel.org
Allow unwinding from prefix code by copying the CFI from the starting
instruction of the corresponding function. Even when the NOPs are
replaced, they're still stack-invariant instructions so the same ORC
entry can be reused everywhere.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/bc3344e51f3e87102f1301a0be0f72a7689ea4a4.1681331135.git.jpoimboe@kernel.org
It's easier to use and also gives easy access to the instruction's
containing function, which is useful for printing that function's
symbol. It will also be useful in the future for rate-limiting and
disassembly of warned functions.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/2eaa3155c90fba683d8723599f279c46025b75f3.1681325924.git.jpoimboe@kernel.org
If a function has a large stack frame, the stackleak plugin adds a call
to stackleak_track_stack() after the prologue.
This function may be called in uaccess-enabled code. Add it to the
uaccess safe list.
Fixes the following warning:
vmlinux.o: warning: objtool: kasan_report+0x12: call to stackleak_track_stack() with UACCESS enabled
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/42e9b487ef89e9b237fd5220ad1c7cf1a2ad7eb8.1681320562.git.jpoimboe@kernel.org
Commit 468af56a7b ("objtool: Support addition to set CFA base") was
added as a preparatory patch for arm64 support, but that support never
came. It triggers a false positive warning on x86, so just revert it
for now.
Fixes the following warning:
vmlinux.o: warning: objtool: cdce925_regmap_i2c_write+0xdb: stack state mismatch: cfa1=4+120 cfa2=5+40
Fixes: 468af56a7b ("objtool: Support addition to set CFA base")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-kbuild-all/202304080538.j5G6h1AB-lkp@intel.com/
Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
closely match the structure of the source directories it describes.
All in-kernel references to the old paths have been updated.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Mark reported that the ORC unwinder incorrectly marks an unwind as
reliable when the unwind terminates prematurely in the dark corners of
return_to_handler() due to lack of information about the next frame.
The problem is UNWIND_HINT_EMPTY is used in two different situations:
1) The end of the kernel stack unwind before hitting user entry, boot
code, or fork entry
2) A blind spot in ORC coverage where the unwinder has to bail due to
lack of information about the next frame
The ORC unwinder has no way to tell the difference between the two.
When it encounters an undefined stack state with 'end=1', it blindly
marks the stack reliable, which can break the livepatch consistency
model.
Fix it by splitting UNWIND_HINT_EMPTY into UNWIND_HINT_UNDEFINED and
UNWIND_HINT_END_OF_STACK.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/fd6212c8b450d3564b855e1cb48404d6277b4d9f.1677683419.git.jpoimboe@kernel.org
The ENTRY unwind hint type is serving double duty as both an empty
unwind hint and an unret validation annotation.
Unret validation is unrelated to unwinding. Separate it out into its own
annotation.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/ff7448d492ea21b86d8a90264b105fbd0d751077.1677683419.git.jpoimboe@kernel.org
Before commit 076cbf5d2163 ("x86/xen: don't let xen_pv_play_dead()
return"), in Xen, when a previously offlined CPU was brought back
online, it unexpectedly resumed execution where it left off in the
middle of the idle loop.
There were some hacks to make that work, but the behavior was surprising
as do_idle() doesn't expect an offlined CPU to return from the dead (in
arch_cpu_idle_dead()).
Now that Xen has been fixed, and the arch-specific implementations of
arch_cpu_idle_dead() also don't return, give it a __noreturn attribute.
This will cause the compiler to complain if an arch-specific
implementation might return. It also improves code generation for both
caller and callee.
Also fixes the following warning:
vmlinux.o: warning: objtool: do_idle+0x25f: unreachable instruction
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/60d527353da8c99d4cf13b6473131d46719ed16d.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
- Shrink 'struct instruction', to improve objtool performance & memory
footprint.
- Other maximum memory usage reductions - this makes the build both faster,
and fixes kernel build OOM failures on allyesconfig and similar configs
when they try to build the final (large) vmlinux.o.
- Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
single-byte instruction (PUSH/POP or LEAVE). This requires the
extension of the ORC metadata structure with a 'signal' field.
- Misc fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bpPY
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Shrink 'struct instruction', to improve objtool performance & memory
footprint
- Other maximum memory usage reductions - this makes the build both
faster, and fixes kernel build OOM failures on allyesconfig and
similar configs when they try to build the final (large) vmlinux.o
- Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
single-byte instruction (PUSH/POP or LEAVE). This requires the
extension of the ORC metadata structure with a 'signal' field
- Misc fixes & cleanups
* tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
objtool: Fix ORC 'signal' propagation
objtool: Remove instruction::list
x86: Fix FILL_RETURN_BUFFER
objtool: Fix overlapping alternatives
objtool: Union instruction::{call_dest,jump_table}
objtool: Remove instruction::reloc
objtool: Shrink instruction::{type,visited}
objtool: Make instruction::alts a single-linked list
objtool: Make instruction::stack_ops a single-linked list
objtool: Change arch_decode_instruction() signature
x86/entry: Fix unwinding from kprobe on PUSH/POP instruction
x86/unwind/orc: Add 'signal' field to ORC metadata
objtool: Optimize layout of struct special_alt
objtool: Optimize layout of struct symbol
objtool: Allocate multiple structures with calloc()
objtool: Make struct check_options static
objtool: Make struct entries[] static and const
objtool: Fix HOSTCC flag usage
objtool: Properly support make V=1
objtool: Install libsubcmd in build
...
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
There have been some recently reported ORC unwinder warnings like:
WARNING: can't access registers at entry_SYSCALL_64_after_hwframe+0x63/0xcd
WARNING: stack going in the wrong direction? at __sys_setsockopt+0x2c6/0x5b0 net/socket.c:2271
And a KASAN warning:
BUG: KASAN: stack-out-of-bounds in unwind_next_frame (arch/x86/include/asm/ptrace.h:136 arch/x86/kernel/unwind_orc.c:455)
It turns out the 'signal' bit isn't getting propagated from the unwind
hints to the ORC entries, making the unwinder confused at times.
Fixes: ffb1b4a410 ("x86/unwind/orc: Add 'signal' field to ORC metadata")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/97eef9db60cd86d376a9a40d49d77bb67a8f6526.1676579666.git.jpoimboe@kernel.org
