__btrfs_free_reserved_extent performs 2 entirely different operations
depending on whether its 'pin' argument is true or false. This patch
lifts the 2nd case (pin is false) into it's sole caller
btrfs_free_reserved_extent. No semantics changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers of btrfs_free_reserved_extent (respectively
__btrfs_free_reserved_extent with in set to 0) pass in extents which
have only been reserved but not yet written to. Namely,
* in cow_file_range that function is called only if create_io_em fails
or btrfs_add_ordered_extent fail, both of which happen _before_ any IO
is submitted to the newly reserved range
* in submit_compressed_extents the code flow is similar -
out_free_reserve can be called only before
btrfs_submit_compressed_write which is where any writes to the range
could occur
* btrfs_new_extent_direct also calls btrfs_free_reserved_extent only
if extent_map fails, before any IO is issued
* __btrfs_prealloc_file_range also calls btrfs_free_reserved_extent
in case insertion of the metadata fails
* btrfs_alloc_tree_block again can only be called in case in-memory
operations fail, before any IO is submitted
* btrfs_finish_ordered_io - this is the only caller where discarding
the extent could have a material effect, since it can be called for
an extent which was partially written.
With this change the submission of discards is optimised since discards
are now not being created for extents which are known to not have been
touched on disk.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a file that has shared extents (reflinked with other files or
with itself), we can end up logging multiple checksum items that cover
overlapping ranges. This confuses the search for checksums at log replay
time causing some checksums to never be added to the fs/subvolume tree.
Consider the following example of a file that shares the same extent at
offsets 0 and 256Kb:
[ bytenr 13893632, offset 64Kb, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 13893632, offset 0, len 256Kb ]
256Kb 512Kb
When logging the inode, at tree-log.c:copy_items(), when processing the
file extent item at offset 0, we log a checksum item covering the range
13959168 to 14024704, which corresponds to 13893632 + 64Kb and 13893632 +
64Kb + 64Kb, respectively.
Later when processing the extent item at offset 256K, we log the checksums
for the range from 13893632 to 14155776 (which corresponds to 13893632 +
256Kb). These checksums get merged with the checksum item for the range
from 13631488 to 13893632 (13631488 + 256Kb), logged by a previous fsync.
So after this we get the two following checksum items in the log tree:
(...)
item 6 key (EXTENT_CSUM EXTENT_CSUM 13631488) itemoff 3095 itemsize 512
range start 13631488 end 14155776 length 524288
item 7 key (EXTENT_CSUM EXTENT_CSUM 13959168) itemoff 3031 itemsize 64
range start 13959168 end 14024704 length 65536
The first one covers the range from the second one, they overlap.
So far this does not cause a problem after replaying the log, because
when replaying the file extent item for offset 256K, we copy all the
checksums for the extent 13893632 from the log tree to the fs/subvolume
tree, since searching for an checksum item for bytenr 13893632 leaves us
at the first checksum item, which covers the whole range of the extent.
However if we write 64Kb to file offset 256Kb for example, we will
not be able to find and copy the checksums for the last 128Kb of the
extent at bytenr 13893632, referenced by the file range 384Kb to 512Kb.
After writing 64Kb into file offset 256Kb we get the following extent
layout for our file:
[ bytenr 13893632, offset 64K, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 14155776, offset 0, len 64Kb ]
256Kb 320Kb
[ bytenr 13893632, offset 64Kb, len 192Kb ]
320Kb 512Kb
After fsync'ing the file, if we have a power failure and then mount
the filesystem to replay the log, the following happens:
1) When replaying the file extent item for file offset 320Kb, we
lookup for the checksums for the extent range from 13959168
(13893632 + 64Kb) to 14155776 (13893632 + 256Kb), through a call
to btrfs_lookup_csums_range();
2) btrfs_lookup_csums_range() finds the checksum item that starts
precisely at offset 13959168 (item 7 in the log tree, shown before);
3) However that checksum item only covers 64Kb of data, and not 192Kb
of data;
4) As a result only the checksums for the first 64Kb of data referenced
by the file extent item are found and copied to the fs/subvolume tree.
The remaining 128Kb of data, file range 384Kb to 512Kb, doesn't get
the corresponding data checksums found and copied to the fs/subvolume
tree.
5) After replaying the log userspace will not be able to read the file
range from 384Kb to 512Kb, because the checksums are missing and
resulting in an -EIO error.
The following steps reproduce this scenario:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xa3 0 256K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xc7 256K 256K" /mnt/sdc/foobar
$ xfs_io -c "reflink /mnt/sdc/foobar 320K 0 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xe5 256K 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
<power failure>
$ mount /dev/sdc /mnt/sdc
$ md5sum /mnt/sdc/foobar
md5sum: /mnt/sdc/foobar: Input/output error
$ dmesg | tail
[165305.003464] BTRFS info (device sdc): no csum found for inode 257 start 401408
[165305.004014] BTRFS info (device sdc): no csum found for inode 257 start 405504
[165305.004559] BTRFS info (device sdc): no csum found for inode 257 start 409600
[165305.005101] BTRFS info (device sdc): no csum found for inode 257 start 413696
[165305.005627] BTRFS info (device sdc): no csum found for inode 257 start 417792
[165305.006134] BTRFS info (device sdc): no csum found for inode 257 start 421888
[165305.006625] BTRFS info (device sdc): no csum found for inode 257 start 425984
[165305.007278] BTRFS info (device sdc): no csum found for inode 257 start 430080
[165305.008248] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
[165305.009550] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
Fix this simply by deleting first any checksums, from the log tree, for the
range of the extent we are logging at copy_items(). This ensures we do not
get checksum items in the log tree that have overlapping ranges.
This is a long time issue that has been present since we have the clone
(and deduplication) ioctl, and can happen both when an extent is shared
between different files and within the same file.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a BUG_ON(ret < 0) in find_free_extent from
btrfs_cache_block_group. If we fail to allocate our ctl we'll just
panic, which is not good. Instead just go on to another block group.
If we fail to find a block group we don't want to return ENOSPC, because
really we got a ENOMEM and that's the root of the problem. Save our
return from btrfs_cache_block_group(), and then if we still fail to make
our allocation return that ret so we get the right error back.
Tested with inject-error.py from bcc.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When deleting large files (which cross block group boundary) with
discard mount option, we find some btrfs_discard_extent() calls only
trimmed part of its space, not the whole range:
btrfs_discard_extent: type=0x1 start=19626196992 len=2144530432 trimmed=1073741824 ratio=50%
type: bbio->map_type, in above case, it's SINGLE DATA.
start: Logical address of this trim
len: Logical length of this trim
trimmed: Physically trimmed bytes
ratio: trimmed / len
Thus leaving some unused space not discarded.
[CAUSE]
When discard mount option is specified, after a transaction is fully
committed (super block written to disk), we begin to cleanup pinned
extents in the following call chain:
btrfs_commit_transaction()
|- btrfs_finish_extent_commit()
|- find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY);
|- btrfs_discard_extent()
However, pinned extents are recorded in an extent_io_tree, which can
merge adjacent extent states.
When a large file gets deleted and it has adjacent file extents across
block group boundary, we will get a large merged range like this:
|<--- BG1 --->|<--- BG2 --->|
|//////|<-- Range to discard --->|/////|
To discard that range, we have the following calls:
btrfs_discard_extent()
|- btrfs_map_block()
| Returned bbio will end at BG1's end. As btrfs_map_block()
| never returns result across block group boundary.
|- btrfs_issuse_discard()
Issue discard for each stripe.
So we will only discard the range in BG1, not the remaining part in BG2.
Furthermore, this bug is not that reliably observed, for above case, if
there is no other extent in BG2, BG2 will be empty and btrfs will trim
all space of BG2, covering up the bug.
[FIX]
- Allow __btrfs_map_block_for_discard() to modify @length parameter
btrfs_map_block() uses its @length paramter to notify the caller how
many bytes are mapped in current call.
With __btrfs_map_block_for_discard() also modifing the @length,
btrfs_discard_extent() now understands when to do extra trim.
- Call btrfs_map_block() in a loop until we hit the range end Since we
now know how many bytes are mapped each time, we can iterate through
each block group boundary and issue correct trim for each range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The on-disk format of block group item makes use of the key that stores
the offset and length. This is further used in the code, although this
makes thing harder to understand. The key is also packed so the
offset/length is not properly aligned as u64.
Add start (key.objectid) and length (key.offset) members to block group
and remove the embedded key. When the item is searched or written, a
local variable for key is used.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For unknown reasons, the member 'used' in the block group struct is
stored in the b-tree item and accessed everywhere using the special
accessor helper. Let's unify it and make it a regular member and only
update the item before writing it to the tree.
The item is still being used for flags and chunk_objectid, there's some
duplication until the item is removed in following patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using an ASSERT in btrfs_pin_extent allows to more stringently observe
whether the function is called under a transaction or not.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper is trivial and we can understand what the atomic_inc on
something named refs does.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_space_info_add_old_bytes simply checks if we can make the
reservation and updates bytes_may_use, there's no reason to have both
helpers in place.
Factor out the ticket wakeup logic into it's own helper, make
btrfs_space_info_add_old_bytes() update bytes_may_use and then call the
wakeup helper, and replace all calls to btrfs_space_info_add_new_bytes()
with the wakeup helper.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We duplicate this tracepoint everywhere we call these helpers, so update
the helper to have the tracepoint as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file ctree.h serves as a header for everything and has become quite
bloated. Split some helpers that are generic and create a new file that
should be the catch-all for code that's not btrfs-specific.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
run_delalloc_nocow contains numerous, somewhat subtle, checks when
figuring out whether a particular extent should be CoW'ed or not. This
patch explicitly states the assumptions those checks verify. As a
result also document 2 of the more subtle checks in check_committed_ref
as well.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
EXTENT_DATA_REF is a little like DIR_ITEM which contains hash in its
key->offset.
This patch will check the following contents:
- Key->objectid
Basic alignment check.
- Hash
Hash of each extent_data_ref item must match key->offset.
- Offset
Basic alignment check.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This can now be easily migrated as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ refresh on top of sysfs cleanups ]
Signed-off-by: David Sterba <dsterba@suse.com>
These feel more at home in block-group.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ refresh, adjust btrfs_get_alloc_profile exports ]
Signed-off-by: David Sterba <dsterba@suse.com>
This feels more at home in block-group.c than in extent-tree.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>i
[ refresh ]
Signed-off-by: David Sterba <dsterba@suse.com>
We can now easily migrate this code as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Want to move these functions into block-group.c, so export them.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This can be easily migrated over now.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
This can easily be moved now.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ refresh ]
Signed-off-by: David Sterba <dsterba@suse.com>
This gets used by a few different logical chunks of the block group
code, export it while we move things around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All of the prep work has been done so we can now cleanly move this chunk
over.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ refresh, add btrfs_get_alloc_profile export, comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is the removal code and the unused bgs code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ refresh, move clear_incompat_bg_bits ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is used in a few logical parts of the block group code, temporarily
export it so we can move things in pieces.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can now just copy it over to block-group.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers to create block group and space info directories already
live in sysfs.c, move the deletion part there too.
Signed-off-by: David Sterba <dsterba@suse.com>
The part of link_block_group that just creates the sysfs object is
independent and can be factored out to a helper.
Signed-off-by: David Sterba <dsterba@suse.com>
extent-tree.c has a find_next_key that just walks up the path to find
the next key, but it is used for both the caching stuff and the snapshot
delete stuff. The snapshot deletion stuff is special so it can't really
use btrfs_find_next_key, but the caching thread stuff can. We just need
to fix btrfs_find_next_key to deal with ->skip_locking and then it works
exactly the same as the private find_next_key helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used in caching and reading block groups, so export it while we
move these chunks independently.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Man a lot of people use this stuff.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We'll need this to move the caching stuff around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This will make it so we can move them easily.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ coding style updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
These are relatively straightforward as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Another easy set to move over to block-group.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these bits first as they are the easiest to move. Export two of
the helpers so they can be moved all at once.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor style updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is prep work for moving all of the block group cache code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With fuzzed image and MIXED_GROUPS super flag, we can hit the following
BUG_ON():
kernel BUG at fs/btrfs/delayed-ref.c:491!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 1849 Comm: sync Tainted: G O 5.2.0-custom #27
RIP: 0010:update_existing_head_ref.cold+0x44/0x46 [btrfs]
Call Trace:
add_delayed_ref_head+0x20c/0x2d0 [btrfs]
btrfs_add_delayed_tree_ref+0x1fc/0x490 [btrfs]
btrfs_free_tree_block+0x123/0x380 [btrfs]
__btrfs_cow_block+0x435/0x500 [btrfs]
btrfs_cow_block+0x110/0x240 [btrfs]
btrfs_search_slot+0x230/0xa00 [btrfs]
? __lock_acquire+0x105e/0x1e20
btrfs_insert_empty_items+0x67/0xc0 [btrfs]
alloc_reserved_file_extent+0x9e/0x340 [btrfs]
__btrfs_run_delayed_refs+0x78e/0x1240 [btrfs]
? kvm_clock_read+0x18/0x30
? __sched_clock_gtod_offset+0x21/0x50
btrfs_run_delayed_refs.part.0+0x4e/0x180 [btrfs]
btrfs_run_delayed_refs+0x23/0x30 [btrfs]
btrfs_commit_transaction+0x53/0x9f0 [btrfs]
btrfs_sync_fs+0x7c/0x1c0 [btrfs]
? __ia32_sys_fdatasync+0x20/0x20
sync_fs_one_sb+0x23/0x30
iterate_supers+0x95/0x100
ksys_sync+0x62/0xb0
__ia32_sys_sync+0xe/0x20
do_syscall_64+0x65/0x240
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[CAUSE]
This situation is caused by several factors:
- Fuzzed image
The extent tree of this fs missed one backref for extent tree root.
So we can allocated space from that slot.
- MIXED_BG feature
Super block has MIXED_BG flag.
- No mixed block groups exists
All block groups are just regular ones.
This makes data space_info->block_groups[] contains metadata block
groups. And when we reserve space for data, we can use space in
metadata block group.
Then we hit the following file operations:
- fallocate
We need to allocate data extents.
find_free_extent() choose to use the metadata block to allocate space
from, and choose the space of extent tree root, since its backref is
missing.
This generate one delayed ref head with is_data = 1.
- extent tree update
We need to update extent tree at run_delayed_ref time.
This generate one delayed ref head with is_data = 0, for the same
bytenr of old extent tree root.
Then we trigger the BUG_ON().
[FIX]
The quick fix here is to check block_group->flags before using it.
The problem can only happen for MIXED_GROUPS fs. Regular filesystems
won't have space_info with DATA|METADATA flag, and no way to hit the
bug.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203255
Reported-by: Jungyeon Yoon <jungyeon.yoon@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Test case btrfs/156 fails since commit 302167c50b ("btrfs: don't end
the transaction for delayed refs in throttle") with ENOSPC.
[CAUSE]
The ENOSPC is reported from btrfs_can_relocate().
This function will check:
- If this block group is empty, we can relocate
- If we can enough free space, we can relocate
Above checks are valid but the following check is vague due to its
implementation:
- If and only if we can allocated a new block group to contain all the
used space, we can relocate
This design itself is OK, but the way to determine if we can allocate a
new block group is problematic.
btrfs_can_relocate() uses find_free_dev_extent() to find free space on a
device.
However find_free_dev_extent() only searches commit root and excludes
dev extents allocated in current trans, this makes it unable to use dev
extent just freed in current transaction.
So for the following example, btrfs_can_relocate() will report ENOSPC:
The example block group layout:
1M 129M 257M 385M 513M 550M
|///////|///////////|//////////| | |
// = Used bg, consider all bg is 100% used for easy calculation.
And all block groups are SINGLE, on-disk bytenr is the same as the
logical bytenr.
1) Bg in [129M, 257M) get relocated to [385M, 513M), transid=100
1M 129M 257M 385M 513M 550M
|///////| |//////////|/////////|
In transid 100, bg in [129M, 257M) get relocated to [385M, 513M)
However transid 100 is not committed yet, so in dev commit tree, we
still have the old dev extents layout:
1M 129M 257M 385M 513M 550M
|///////|///////////|//////////| | |
2) Try to relocate bg [257M, 385M)
We goes into btrfs_can_relocate(), no free space in current bgs, so we
check if we can find large enough free dev extents.
The first slot is [385M, 513M), but that is already used by new bg at
[385M, 513M), so we continue search.
The remaining slot is [512M, 550M), smaller than the bg's length 128M.
So btrfs_can_relocate report ENOSPC.
However this is over killed, in fact if we just skip btrfs_can_relocate()
check, and go into regular relocation routine, at extent reservation time,
if we can't find free extent, then we fallback to commit transaction,
which will free up the dev extents and allow new block group to be created.
[FIX]
The fix here is to remove btrfs_can_relocate() completely.
If we hit the false ENOSPC case just like btrfs/156, extent allocator
will push harder by committing transaction and we will have space for
new block group, avoiding the false ENOSPC.
If we really ran out of space, we will hit ENOSPC at
relocate_block_group(), and btrfs will just reports the ENOSPC error as
usual.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
inc_block_group_ro() is only designed to mark one block group read-only,
it doesn't really care if other block groups have enough free space to
contain the used space in the block group.
However due to the close connection between this function and
relocation, sometimes we can be confused and think this function is
responsible for balance space reservation, which is not true.
Add some comment to make the functionality clear.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Normally the range->len is set to default value (U64_MAX), but when it's
not default value, we should check if the range overflows.
And if it overflows, return -EINVAL before doing anything.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the 5.3 merge window, commit 7c7e301406 ("btrfs: sysfs: Replace
default_attrs in ktypes with groups"), we started using the member
"defaults_groups" for the kobject type "btrfs_raid_ktype". That leads
to a series of warnings when running some test cases of fstests, such
as btrfs/027, btrfs/124 and btrfs/176. The traces produced by those
warnings are like the following:
[116648.059212] kernfs: can not remove 'total_bytes', no directory
[116648.060112] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.066482] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1
(...)
[116648.069376] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.072385] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
[116648.073437] RAX: 0000000000000000 RBX: ffffffffc0c11998 RCX: 0000000000000000
[116648.074201] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
[116648.074956] RBP: ffffffffc0b9ca2f R08: 0000000000000000 R09: 0000000000000001
[116648.075708] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
[116648.076434] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
[116648.077143] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
[116648.077852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[116648.078546] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
[116648.079235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[116648.079907] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[116648.080585] Call Trace:
[116648.081262] remove_files+0x31/0x70
[116648.081929] sysfs_remove_group+0x38/0x80
[116648.082596] sysfs_remove_groups+0x34/0x70
[116648.083258] kobject_del+0x20/0x60
[116648.083933] btrfs_free_block_groups+0x405/0x430 [btrfs]
[116648.084608] close_ctree+0x19a/0x380 [btrfs]
[116648.085278] generic_shutdown_super+0x6c/0x110
[116648.085951] kill_anon_super+0xe/0x30
[116648.086621] btrfs_kill_super+0x12/0xa0 [btrfs]
[116648.087289] deactivate_locked_super+0x3a/0x70
[116648.087956] cleanup_mnt+0xb4/0x160
[116648.088620] task_work_run+0x7e/0xc0
[116648.089285] exit_to_usermode_loop+0xfa/0x100
[116648.089933] do_syscall_64+0x1cb/0x220
[116648.090567] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[116648.091197] RIP: 0033:0x7f9cdc073b37
(...)
[116648.100046] ---[ end trace 22e24db328ccadf8 ]---
[116648.100618] ------------[ cut here ]------------
[116648.101175] kernfs: can not remove 'used_bytes', no directory
[116648.101731] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.105649] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1
(...)
[116648.107461] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.109336] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
[116648.109979] RAX: 0000000000000000 RBX: ffffffffc0c119a0 RCX: 0000000000000000
[116648.110625] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
[116648.111283] RBP: ffffffffc0b9ca41 R08: 0000000000000000 R09: 0000000000000001
[116648.111940] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
[116648.112603] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
[116648.113268] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
[116648.113939] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[116648.114607] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
[116648.115286] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[116648.115966] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[116648.116649] Call Trace:
[116648.117326] remove_files+0x31/0x70
[116648.117997] sysfs_remove_group+0x38/0x80
[116648.118671] sysfs_remove_groups+0x34/0x70
[116648.119342] kobject_del+0x20/0x60
[116648.120022] btrfs_free_block_groups+0x405/0x430 [btrfs]
[116648.120707] close_ctree+0x19a/0x380 [btrfs]
[116648.121396] generic_shutdown_super+0x6c/0x110
[116648.122057] kill_anon_super+0xe/0x30
[116648.122702] btrfs_kill_super+0x12/0xa0 [btrfs]
[116648.123335] deactivate_locked_super+0x3a/0x70
[116648.123961] cleanup_mnt+0xb4/0x160
[116648.124586] task_work_run+0x7e/0xc0
[116648.125210] exit_to_usermode_loop+0xfa/0x100
[116648.125830] do_syscall_64+0x1cb/0x220
[116648.126463] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[116648.127080] RIP: 0033:0x7f9cdc073b37
(...)
[116648.135923] ---[ end trace 22e24db328ccadf9 ]---
These happen because, during the unmount path, we call kobject_del() for
raid kobjects that are not fully initialized, meaning that we set their
ktype (as btrfs_raid_ktype) through link_block_group() but we didn't set
their parent kobject, which is done through btrfs_add_raid_kobjects().
We have this split raid kobject setup since commit 75cb379d26
("btrfs: defer adding raid type kobject until after chunk relocation") in
order to avoid triggering reclaim during contextes where we can not
(either we are holding a transaction handle or some lock required by
the transaction commit path), so that we do the calls to kobject_add(),
which triggers GFP_KERNEL allocations, through btrfs_add_raid_kobjects()
in contextes where it is safe to trigger reclaim. That change expected
that a new raid kobject can only be created either when mounting the
filesystem or after raid profile conversion through the relocation path.
However, we can have new raid kobject created in other two cases at least:
1) During device replace (or scrub) after adding a device a to the
filesystem. The replace procedure (and scrub) do calls to
btrfs_inc_block_group_ro() which can allocate a new block group
with a new raid profile (because we now have more devices). This
can be triggered by test cases btrfs/027 and btrfs/176.
2) During a degraded mount trough any write path. This can be triggered
by test case btrfs/124.
Fixing this by adding extra calls to btrfs_add_raid_kobjects(), not only
makes things more complex and fragile, can also introduce deadlocks with
reclaim the following way:
1) Calling btrfs_add_raid_kobjects() at btrfs_inc_block_group_ro() or
anywhere in the replace/scrub path will cause a deadlock with reclaim
because if reclaim happens and a transaction commit is triggered,
the transaction commit path will block at btrfs_scrub_pause().
2) During degraded mounts it is essentially impossible to figure out where
to add extra calls to btrfs_add_raid_kobjects(), because allocation of
a block group with a new raid profile can happen anywhere, which means
we can't safely figure out which contextes are safe for reclaim, as
we can either hold a transaction handle or some lock needed by the
transaction commit path.
So it is too complex and error prone to have this split setup of raid
kobjects. So fix the issue by consolidating the setup of the kobjects in a
single place, at link_block_group(), and setup a nofs context there in
order to prevent reclaim being triggered by the memory allocations done
through the call chain of kobject_add().
Besides fixing the sysfs warnings during kobject_del(), this also ensures
the sysfs directories for the new raid profiles end up created and visible
to users (a bug that existed before the 5.3 commit 7c7e301406
("btrfs: sysfs: Replace default_attrs in ktypes with groups")).
Fixes: 75cb379d26 ("btrfs: defer adding raid type kobject until after chunk relocation")
Fixes: 7c7e301406 ("btrfs: sysfs: Replace default_attrs in ktypes with groups")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is just two functions, put it in root-tree.c since it involves root
items.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have code for data and metadata reservations for delalloc. There's
quite a bit of code here, and it's used in a lot of places so I've
separated it out to it's own file. inode.c and file.c are already
pretty large, and this code is complicated enough to live in its own
space.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move this into transaction.c with the rest of the transaction related
code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These belong with the delayed refs related code, not in extent-tree.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This moves everything out of extent-tree.c to block-rsv.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
block_rsv_release_bytes() is the internal to the block_rsv code, and
shouldn't be called directly by anything else. Switch all users to the
exported helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This works for all callers already, but if we wanted to use the helper
for the global_block_rsv it would end up trying to refill itself. Fix
the logic to be able to be used no matter which block rsv is passed in
to this helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delalloc reserve stuff calls this directly because it cares about
the qgroup accounting stuff, so export it so we can move it around. Fix
btrfs_block_rsv_release() to just be a static inline since it just calls
__btrfs_block_rsv_release() with NULL for the qgroup stuff.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used in a few places, we need to make sure it's exported so we
can move it around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prep work for separating out all of the block_rsv related code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This moves all of the metadata reservation code into space-info.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We'll need this exported so we can use it in all the various was we need
to use it. This is prep work to move reserve_metadata_bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are going to need this to move the metadata reservation stuff to
space_info.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've moved all the pre-requisite stuff, move these two
functions.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Also rename it to btrfs_space_info_update_* so it's clear what we're
updating.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the first piece of moving the space reservation code to
space-info.c
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These are the basic init and lookup functions and some helper functions,
fairly straightforward before the bad stuff starts.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prep work for consolidating all of the space_info code into one file.
We need to export these so multiple files can use them.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Really we just need the enum, but as we break more things up it'll help
to have this external to extent-tree.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Migrate the struct definition and the one helper that's in ctree.h into
space-info.h
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A few more instances whre we don't need to specify the values as long as
they are the same that enum assigns automatically. All of the enums are
in-memory only and nothing relies on the exact values.
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory patch for additional RAID1 profiles with more copies. The
mask will contain 3-copy and 4-copy, most of the checks for plain RAID1
work the same for the other profiles.
Signed-off-by: David Sterba <dsterba@suse.com>
The incompat bit for RAID56 is set either at mount time or automatically
when the profile is used by balance. The part where the bit is removed
is missing and can be unexpected or undesired when an older kernel is
needed.
This patch will drop the incompat bit after this command, assuming
that RAID5 profile is not used by system or metadata:
$ btrfs balance start -dconvert=raid5 /mnt
$ btrfs balance start -dconvert=raid1 /mnt
This will print "clearing 128 feature flag" to the system log.
The patch is safe for backporting to older kernels.
Reported-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the first megabyte on a device housing a btrfs filesystem is
exempt from allocation and trimming. Currently this is not a problem
since 'start' is set to 1M at the beginning of btrfs_trim_free_extents
and find_first_clear_extent_bit always returns a range that is >= start.
However, in a follow up patch find_first_clear_extent_bit will be
changed such that it will return a range containing 'start' and this
range may very well be 0...>=1M so 'start'.
Future proof the sole user of find_first_clear_extent_bit by setting
'start' after the function is called. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9678c54388 ("btrfs: Remove custom crc32c init code") removed
the btrfs_crc32c() function, because it was a duplicate of the crc32c()
library function we already have in the kernel.
Resurrect it as a shim wrapper over crc32c() to make following
transformations of the checksumming code in btrfs easier.
Also provide a btrfs_crc32_final() to ease following transformations.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just add a safe net for btrfs_space_info member updating.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper lacks the btrfs_ prefix and the parameter is the raw
blockgroup type, so none of the callers has to do the flags -> index
conversion.
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info::mapping_tree is the physical<->logical mapping tree and uses
the same underlying structure as extents, but is embedded to another
structure. There are no other members and this indirection is useless.
No functional change.
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using @sign to determine whether we're adding or subtracting.
Even it only has 3 callers, it's still (and in fact already caused
problem in the past) confusing to use.
Refactor add_pinned_bytes() to add_pinned_bytes() and sub_pinned_bytes()
to explicitly show what we're doing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a task is removing the block group that currently has the highest start
offset amongst all existing block groups, there is a short time window
where it races with a concurrent block group allocation, resulting in a
transaction abort with an error code of EEXIST.
The following diagram explains the race in detail:
Task A Task B
btrfs_remove_block_group(bg offset X)
remove_extent_mapping(em offset X)
-> removes extent map X from the
tree of extent maps
(fs_info->mapping_tree), so the
next call to find_next_chunk()
will return offset X
btrfs_alloc_chunk()
find_next_chunk()
--> returns offset X
__btrfs_alloc_chunk(offset X)
btrfs_make_block_group()
btrfs_create_block_group_cache()
--> creates btrfs_block_group_cache
object with a key corresponding
to the block group item in the
extent, the key is:
(offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G)
--> adds the btrfs_block_group_cache object
to the list new_bgs of the transaction
handle
btrfs_end_transaction(trans handle)
__btrfs_end_transaction()
btrfs_create_pending_block_groups()
--> sees the new btrfs_block_group_cache
in the new_bgs list of the transaction
handle
--> its call to btrfs_insert_item() fails
with -EEXIST when attempting to insert
the block group item key
(offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G)
because task A has not removed that key yet
--> aborts the running transaction with
error -EEXIST
btrfs_del_item()
-> removes the block group's key from
the extent tree, key is
(offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G)
A sample transaction abort trace:
[78912.403537] ------------[ cut here ]------------
[78912.403811] BTRFS: Transaction aborted (error -17)
[78912.404082] WARNING: CPU: 2 PID: 20465 at fs/btrfs/extent-tree.c:10551 btrfs_create_pending_block_groups+0x196/0x250 [btrfs]
(...)
[78912.405642] CPU: 2 PID: 20465 Comm: btrfs Tainted: G W 5.0.0-btrfs-next-46 #1
[78912.405941] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[78912.406586] RIP: 0010:btrfs_create_pending_block_groups+0x196/0x250 [btrfs]
(...)
[78912.407636] RSP: 0018:ffff9d3d4b7e3b08 EFLAGS: 00010282
[78912.407997] RAX: 0000000000000000 RBX: ffff90959a3796f0 RCX: 0000000000000006
[78912.408369] RDX: 0000000000000007 RSI: 0000000000000001 RDI: ffff909636b16860
[78912.408746] RBP: ffff909626758a58 R08: 0000000000000000 R09: 0000000000000000
[78912.409144] R10: ffff9095ff462400 R11: 0000000000000000 R12: ffff90959a379588
[78912.409521] R13: ffff909626758ab0 R14: ffff9095036c0000 R15: ffff9095299e1158
[78912.409899] FS: 00007f387f16f700(0000) GS:ffff909636b00000(0000) knlGS:0000000000000000
[78912.410285] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[78912.410673] CR2: 00007f429fc87cbc CR3: 000000014440a004 CR4: 00000000003606e0
[78912.411095] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[78912.411496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[78912.411898] Call Trace:
[78912.412318] __btrfs_end_transaction+0x5b/0x1c0 [btrfs]
[78912.412746] btrfs_inc_block_group_ro+0xcf/0x160 [btrfs]
[78912.413179] scrub_enumerate_chunks+0x188/0x5b0 [btrfs]
[78912.413622] ? __mutex_unlock_slowpath+0x100/0x2a0
[78912.414078] btrfs_scrub_dev+0x2ef/0x720 [btrfs]
[78912.414535] ? __sb_start_write+0xd4/0x1c0
[78912.414963] ? mnt_want_write_file+0x24/0x50
[78912.415403] btrfs_ioctl+0x17fb/0x3120 [btrfs]
[78912.415832] ? lock_acquire+0xa6/0x190
[78912.416256] ? do_vfs_ioctl+0xa2/0x6f0
[78912.416685] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[78912.417116] do_vfs_ioctl+0xa2/0x6f0
[78912.417534] ? __fget+0x113/0x200
[78912.417954] ksys_ioctl+0x70/0x80
[78912.418369] __x64_sys_ioctl+0x16/0x20
[78912.418812] do_syscall_64+0x60/0x1b0
[78912.419231] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[78912.419644] RIP: 0033:0x7f3880252dd7
(...)
[78912.420957] RSP: 002b:00007f387f16ed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[78912.421426] RAX: ffffffffffffffda RBX: 000055f5becc1df0 RCX: 00007f3880252dd7
[78912.421889] RDX: 000055f5becc1df0 RSI: 00000000c400941b RDI: 0000000000000003
[78912.422354] RBP: 0000000000000000 R08: 00007f387f16f700 R09: 0000000000000000
[78912.422790] R10: 00007f387f16f700 R11: 0000000000000246 R12: 0000000000000000
[78912.423202] R13: 00007ffda49c266f R14: 0000000000000000 R15: 00007f388145e040
[78912.425505] ---[ end trace eb9bfe7c426fc4d3 ]---
Fix this by calling remove_extent_mapping(), at btrfs_remove_block_group(),
only at the very end, after removing the block group item key from the
extent tree (and removing the free space tree entry if we are using the
free space tree feature).
Fixes: 04216820fe ("Btrfs: fix race between fs trimming and block group remove/allocation")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch removes support for range parameters of FITRIM ioctl when
trimming unallocated space on devices. This is necessary since ranges
passed from user space are generally interpreted as logical addresses,
whereas btrfs_trim_free_extents used to interpret them as device
physical extents. This could result in counter-intuitive behavior for
users so it's best to remove that support altogether.
Additionally, the existing range support had a bug where if an offset
was passed to FITRIM which overflows u64 e.g. -1 (parsed as u64
18446744073709551615) then wrong data was fed into btrfs_issue_discard,
which in turn leads to wrap-around when aligning the passed range and
results in wrong regions being discarded which leads to data corruption.
Fixes: c2d1b3aae3 ("btrfs: Honour FITRIM range constraints during free space trim")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit ddf30cf03f ("btrfs: extent-tree: Use btrfs_ref to refactor
add_pinned_bytes()") refactored add_pinned_bytes(), but during that
refactor, there are two callers which add the pinned bytes instead
of subtracting.
That refactor misses those two caller, causing incorrect pinned bytes
calculation and resulting unexpected ENOSPC error.
Fix it by adding a new parameter @sign to restore the original behavior.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: ddf30cf03f ("btrfs: extent-tree: Use btrfs_ref to refactor add_pinned_bytes()")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a call to kobject_init_and_add() fails we must call kobject_put()
otherwise we leak memory.
Calling kobject_put() when kobject_init_and_add() fails drops the
refcount back to 0 and calls the ktype release method (which in turn
calls the percpu destroy and kfree).
Add call to kobject_put() in the error path of call to
kobject_init_and_add().
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the per-inode block reserves we started refilling the reserve based
on the calculated size of the outstanding csum bytes and extents for the
inode, including the amount we were adding with the new operation.
However, generic/224 exposed a problem with this approach. With 1000
files all writing at the same time we ended up with a bunch of bytes
being reserved but unusable.
When you write to a file we reserve space for the csum leaves for those
bytes, the number of extent items required to cover those bytes, and a
single transaction item for updating the inode at ordered extent finish
for that range of bytes. This is held until the ordered extent finishes
and we release all of the reserved space.
If a second write comes in at this point we would add a single
reservation for the new outstanding extent and however many reservations
for the csum leaves. At this point we find the delta of how much we
have reserved and how much outstanding size this is and attempt to
reserve this delta. If the first write finishes it will not release any
space, because the space it had reserved for the initial write is still
needed for the second write. However some space would have been used,
as we have added csums, extent items, and dirtied the inode. Our
reserved space would be > 0 but less than the total needed reserved
space.
This is just for a single inode, now consider generic/224. This has
1000 inodes writing in parallel to a very small file system, 1GiB. In
my testing this usually means we get about a 120MiB metadata area to
work with, more than enough to allow the writes to continue, but not
enough if all of the inodes are stuck trying to reserve the slack space
while continuing to hold their leftovers from their initial writes.
Fix this by pre-reserved _only_ for the space we are currently trying to
add. Then once that is successful modify our inodes csum count and
outstanding extents, and then add the newly reserved space to the inodes
block_rsv. This allows us to actually pass generic/224 without running
out of metadata space.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When diagnosing a slowdown of generic/224 I noticed we were not doing
anything when calling into shrink_delalloc(). This is because all
writes in 224 are O_DIRECT, not delalloc, and thus our delalloc_bytes
counter is 0, which short circuits most of the work inside of
shrink_delalloc(). However O_DIRECT writes still consume metadata
resources and generate ordered extents, which we can still wait on.
Fix this by tracking outstanding DIO write bytes, and use this as well
as the delalloc bytes counter to decide if we need to lookup and wait on
any ordered extents. If we have more DIO writes than delalloc bytes
we'll go ahead and wait on any ordered extents regardless of our flush
state as flushing delalloc is likely to not gain us anything.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ use dio instead of odirect in identifiers ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since reloc tree doesn't contribute to qgroup numbers, just skip them.
This should catch the final cause of unnecessary data ref processing
when running balance of metadata with qgroups on.
The 4G data 16 snapshots test (*) should explain it pretty well:
| delayed subtree | refactor delayed ref | this patch
---------------------------------------------------------------------
relocated | 22653 | 22673 | 22744
qgroup dirty | 122792 | 48360 | 70
time | 24.494 | 11.606 | 3.944
Finally, we're at the stage where qgroup + metadata balance cost no
obvious overhead.
Test environment:
Test VM:
- vRAM 8G
- vCPU 8
- block dev vitrio-blk, 'unsafe' cache mode
- host block 850evo
Test workload:
- Copy 4G data from /usr/ to one subvolume
- Create 16 snapshots of that subvolume, and modify 3 files in each
snapshot
- Enable quota, rescan
- Time "btrfs balance start -m"
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to btrfs_inc_extent_ref(), use btrfs_ref to replace the long
parameter list and the confusing @owner parameter.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the new btrfs_ref structure and replace parameter list to clean up
the usage of owner and level to distinguish the extent types.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since add_pinned_bytes() only needs to know if the extent is metadata
and if it's a chunk tree extent, btrfs_ref is a perfect match for it, as
we don't need various owner/level trick to determine extent type.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's a perfect match for btrfs_ref_tree_mod() to use btrfs_ref, as
btrfs_ref describes a metadata/data reference update comprehensively.
Now we have one less function use confusing owner/level trick.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just like btrfs_add_delayed_tree_ref(), use btrfs_ref to refactor
btrfs_add_delayed_data_ref().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_add_delayed_tree_ref() has a longer and longer parameter list, and
some callers like btrfs_inc_extent_ref() are using @owner as level for
delayed tree ref.
Instead of making the parameter list longer, use btrfs_ref to refactor
it, so each parameter assignment should be self-explaining without dirty
level/owner trick, and provides the basis for later refactoring.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The process_func function pointer is local to __btrfs_mod_ref() and
points to either btrfs_inc_extent_ref() or btrfs_free_extent().
Open code it to make later delayed ref refactor easier, so we can
refactor btrfs_inc_extent_ref() and btrfs_free_extent() in different
patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
