[ Upstream commit 14adddc65340f2034751c95616861c0e888e2bb1 ]
After resume from suspend to RAM, the following splash is generated if
the HDMI driver is probed (independent of a connected cable):
[ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option)
[ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT
[ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT)
[ 1194.484085] Call trace:
[ 1194.484087] ... (stripped)
[ 1194.484283] handlers:
[ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp]
[ 1194.484302] Disabling IRQ #80
Apparently the HDMI IP is losing part of its state while the system
is suspended and generates spurious interrupts during resume. The
bug has not yet been noticed, as system suspend does not yet work
properly on upstream kernel with either the Rockchip RK3588 or RK3576
platform.
Fixes: 128a9bf8ac ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d1c7dc57ff2400b141e6582a8d2dc5170108cf81 upstream.
Export and namespace those not prefixed with drm_* so
it becomes possible to write custom commit tail functions
in individual drivers using the helper infrastructure.
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # v6.17+
Fixes: c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-3-fda68fa1b3de@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1ef9a6cabb34dbc09e31417b0c0a672fe0de13a upstream.
This reverts commit c9b1150a68.
Changing the enable/disable sequence has caused regressions on multiple
platforms: R-Car, MCDE, Rockchip. A series (see link below) was sent to
fix these, but it was decided that it's better to revert the original
patch and change the enable/disable sequence only in the tidss driver.
Reverting this commit breaks tidss's DSI and OLDI outputs, which will be
fixed in the following commits.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/all/20251202-mcde-drm-regression-thirdfix-v6-0-f1bffd4ec0fa%40kernel.org/
Fixes: c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Cc: stable@vger.kernel.org # v6.17+
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-1-fda68fa1b3de@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 754c23238438600e9236719f7e67aff2c4d02093 upstream.
In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a90 ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 16b5ad31952476fb925c401897fc171cd37f536b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4cd665c98c144dd6ad5d66d30396e13d23118c9 upstream.
Maintain two separate RB trees per order - one for clear (zeroed) blocks
and another for dirty (uncleared) blocks. This separation improves
code clarity and makes it more obvious which tree is being searched
during allocation. It also improves scalability and efficiency when
searching for a specific type of block, avoiding unnecessary checks
and making the allocator more predictable under fragmentation.
The changes have been validated using the existing drm_buddy_test
KUnit test cases, along with selected graphics workloads,
to ensure correctness and avoid regressions.
v2: Missed adding the suggested-by tag. Added it in v2.
v3(Matthew):
- Remove the double underscores from the internal functions.
- Rename the internal functions to have less generic names.
- Fix the error handling code.
- Pass tree argument for the tree macro.
- Use the existing dirty/free bit instead of new tree field.
- Make free_trees[] instead of clear_tree and dirty_tree for
more cleaner approach.
v4:
- A bug was reported by Intel CI and it is fixed by
Matthew Auld.
- Replace the get_root function with
&mm->free_trees[tree][order] (Matthew)
- Remove the unnecessary rbtree_is_empty() check (Matthew)
- Remove the unnecessary get_tree_for_flags() function.
- Rename get_tree_for_block() name with get_block_tree() for more
clarity.
v5(Jani Nikula):
- Don't use static inline in .c files.
- enum free_tree and enumerator names are quite generic for a header
and usage and the whole enum should be an implementation detail.
v6:
- Rewrite the __force_merge() function using the rb_last() and rb_prev().
v7(Matthew):
- Replace the open-coded tree iteration for loops with the
for_each_free_tree() macro throughout the code.
- Fixed out_free_roots to prevent double decrement of i,
addressing potential crash.
- Replaced enum drm_buddy_free_tree with unsigned int
in for_each_free_tree loops.
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4260
Link: https://lore.kernel.org/r/20251006095124.1663-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c178e534fff1d5a74da80ea03b20e2b948a00113 upstream.
Replace the freelist (O(n)) used for free block management with a
red-black tree, providing more efficient O(log n) search, insert,
and delete operations. This improves scalability and performance
when managing large numbers of free blocks per order (e.g., hundreds
or thousands).
In the VK-CTS memory stress subtest, the buddy manager merges
fragmented memory and inserts freed blocks into the freelist. Since
freelist insertion is O(n), this becomes a bottleneck as fragmentation
increases. Benchmarking shows list_insert_sorted() consumes ~52.69% CPU
with the freelist, compared to just 0.03% with the RB tree
(rbtree_insert.isra.0), despite performing the same sorted insert.
This also improves performance in heavily fragmented workloads,
such as games or graphics tests that stress memory.
As the buddy allocator evolves with new features such as clear-page
tracking, the resulting fragmentation and complexity have grown.
These RB-tree based design changes are introduced to address that
growth and ensure the allocator continues to perform efficiently
under fragmented conditions.
The RB tree implementation with separate clear/dirty trees provides:
- O(n log n) aggregate complexity for all operations instead of O(n^2)
- Elimination of soft lockups and system instability
- Improved code maintainability and clarity
- Better scalability for large memory systems
- Predictable performance under fragmentation
v3(Matthew):
- Remove RB_EMPTY_NODE check in force_merge function.
- Rename rb for loop macros to have less generic names and move to
.c file.
- Make the rb node rb and link field as union.
v4(Jani Nikula):
- The kernel-doc comment should be "/**"
- Move all the rbtree macros to rbtree.h and add parens to ensure
correct precedence.
v5:
- Remove the inline in a .c file (Jani Nikula).
v6(Peter Zijlstra):
- Add rb_add() function replacing the existing rbtree_insert() code.
v7:
- A full walk iteration in rbtree is slower than the list (Peter Zijlstra).
- The existing rbtree_postorder_for_each_entry_safe macro should be used
in scenarios where traversal order is not a critical factor (Christian).
v8(Matthew):
- Remove the rbtree_is_empty() check in this patch as well.
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251006095124.1663-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To form the WCL platform as a subplatform of PTL in definition,
WCL pci ids are splited into saparate group from PTL.
So update the pciidlist struct to cover all the pci ids.
v2:
- Squash wcl description in single patch for display and xe.(jani,gustavo)
Fixes: 3c0f211bc8 ("drm/xe: Add Wildcat Lake device IDs to PTL list")
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com
(cherry picked from commit 32620e176443bf23ec81bfe8f177c6721a904864)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added the Fixes tag when porting it to fixes]
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The kernel-doc for struct drm_gpuvm_map_req.map was added as '@op_map'
instead of '@map', leading to this warning during htmldocs build:
WARNING: include/drm/drm_gpuvm.h:1083 struct member 'map' not described in 'drm_gpuvm_map_req'
Fixes: 000a45dce7 ("drm/gpuvm: Pass map arguments through a struct")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20250821133539.03aa298e@canb.auug.org.au/
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When userptr is used on SVM-enabled VMs, a non-NULL
hmm_range::dev_private_owner value might mean that
hmm_range_fault() attempts to return device private pages.
Either that will fail, or the userptr code will not know
how to handle those.
Use NULL for hmm_range::dev_private_owner to migrate
such pages to system. In order to do that, move the
struct drm_gpusvm::device_private_page_owner field to
struct drm_gpusvm_ctx::device_private_page_owner so that
it doesn't remain immutable over the drm_gpusvm lifetime.
v2:
- Don't conditionally compile xe_svm_devm_owner().
- Kerneldoc xe_svm_devm_owner().
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250930122752.96034-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit ad298d9ec957414dbf3d51f3c8bca4b6d2416c0c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
-----BEGIN PGP SIGNATURE-----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=2NXV
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-09-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
Introduce a new MEI client driver to support Late Binding firmware
upload/update for Intel discrete graphics platforms.
Late Binding is a runtime firmware upload/update mechanism that allows
payloads, such as fan control and voltage regulator, to be securely
delivered and applied without requiring SPI flash updates or
system reboots. This driver enables the Xe graphics driver and other
user-space tools to push such firmware blobs to the authentication
firmware via the MEI interface.
The driver handles authentication, versioning, and communication
with the authentication firmware, which in turn coordinates with
the PUnit/PCODE to apply the payload.
This is a foundational component for enabling dynamic, secure,
and re-entrant configuration updates on platforms like Battlemage.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250905154953.3974335-3-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add support for Exynos7870's DSIM IP block in the bridge driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Presently, all devices refer to clock names from a single array. The
only controlling parameter is the number of clocks (num_clks field of
samsung_dsim_driver_data) which uses the first n clocks of that array.
As new devices are added, this approach turns out to be cumbersome.
Separate the clock names in individual arrays required by each variant,
in a struct clk_bulk_data. Add a pointer field to the driver data struct
which points to their respective clock names, and rework the clock usage
code to use the clk_bulk_* API instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The PLL_STABLE bit of DSIM_DPHY_STATUS is hardcoded to BIT(31), but
Exynos7870's DSIM has it in BIT(24) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently, PLL_P offset of DSIM_PLLCTRL is configurable in the driver
data, while PLL_M and PLL_S offsets are hardcoded as 4-bit and 1-bit
offsets respectively, but Exynos7870's DSIM have them at 3-bit and 0-bit
offsets as per downstream kernel sources.
In order to support both, move both offset values to the driver data
struct and define it for every driver compatible. Reference the values
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The VIDEO_MODE bit of DSIM_CONFIG is hardcoded to BIT(25), but
Exynos7870's DSIM has it in BIT(18) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The MAIN_VSA offset of DSIM_MSYNC is hardcoded to a 22-bit offset, but
Exynos7870's DSIM has it in a 16-bit offset as per the downstream kernel
sources.
In order to support both, move this offset value to the driver data
struct and define it for every driver compatible. Reference the value
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSIM_CLKCTRL bit and offset values hardcoded in the driver:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 19
DSIM_LANE_ESC_CLK_EN_DATA | 20
DSIM_BYTE_CLKEN | 24
DSIM_ESC_CLKEN | 28
DSIM_TX_REQUEST_HSCLK | 31
DSIM_CLKCTRL bit and offset values in Exynos7870 DSIM as per downstream
kernel sources:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 8
DSIM_LANE_ESC_CLK_EN_DATA | 9
DSIM_BYTE_CLKEN | 17
DSIM_ESC_CLKEN | 16
DSIM_TX_REQUEST_HSCLK | 20
In order to support both, move all values to the driver data struct and
define it for every driver compatible. Reference the values from there
instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM device doesn't require waiting for the header FIFO
during a MIPI DSI transfer. Add a flag in the driver data in order to
control said behavior.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com
On Exynos7870 devices, enabling the display requires disabling
standby by writing to the SFRCTRL register. Add the register and related
bit values. Since this behavior isn't available on other SoCs, implement
a flag in the driver data struct indicating the availability of this
feature.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM has separate registers for LINK and DPHY status. This
is in contrast to older variants in the driver which use a single
register for both.
Add a driver data flag which indicates that the device variant supports
the legacy status register. Change the register read calls
appropriately.
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmjHMcoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5bwH/23w8iGB4hf7L/7Z
e7blX42Pe9EXA1uK62iWmwEjDvBuJ7TmVfXH09qYJ56fj6/rJEdpQwtBMd4ypL81
QA/7lq5UEl0apPzMN86J8EHCzmjNzv7o+UtEd4C/hPFEZHZJa5Hqj9CBglSwSCEn
fTkLk7Gl6s8SfzBQ/rXX6/ZChAB/RleVWabDlIQMDz++/+9DZ0aqphj+5bYSqysL
ROQOaj4LOICuLfrup9J61hKNBoF7Dv3sO20vc+Iic0XHRPZ6/lKCnHgCUsqVIOOQ
L4kDT7XKQg+n3ttjrMe84/8iHZdWtf8VMWrtniPT8e1YGYuMpavVplgIcFoFCoNm
Qa7NPDs=
=rZeT
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rc6' into drm-next
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-1-airlied@gmail.com
Increase TTM_NUM_MEM_TYPES from 8 to 9 to accommodate the upcoming
AMDGPU_PL_MMIO_REMAP placement.
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move legacy BKL struct_mutex from drm_device to drm_i915_private, which
is the last remaining user.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-2-luiz.mello@estudante.ufscar.br
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move the range_overflows() and range_end_overflows() along with the _t
variants over from drm/i915 and drm/buddy to overflow.h.
Cc: Kees Cook <kees@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250829174601.2163064-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Export get/unmap/free pages API. We also need to tweak the SVM init to
allow skipping much of the unneeded parts.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-15-matthew.auld@intel.com
Pull the pages stuff from the svm range into its own substructure, with
the idea of having the main pages related routines, like get_pages(),
unmap_pages() and free_pages() all operating on some lower level
structures, which can then be re-used for stuff like userptr.
v2:
- Move seq into pages struct (Matt B)
v3:
- Small kernel-doc fixes
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-13-matthew.auld@intel.com
Cross-subsystem Changes:
- Update a number of DT bindings for STM32MP25 Arm SoC
Core Changes:
gem:
- Simplify locking for GPUVM
panel-backlight-quirks:
- Add additional quirks for EDID, DMI, brightness
sched:
- Fix race condition in trace code
- Clean up
sysfb:
- Clean up
Driver Changes:
amdgpu:
- Give kernel jobs a unique id for better tracing
amdxdna:
- Improve error reporting
bridge:
- Improve ref counting on bridge management
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
gud:
- Replace simple-KMS pipe with regular atomic helpers
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
ivpu:
- Clean up
nouveau:
- Improve error reporting
panthor:
- Fail VM bind if BO has offset
- Clean up
rcar-du:
- Make number of lanes configurable
rockchip:
- Add support for RK3588 DPTX output
rocket:
- Use kfree() and sizeof() correctly
- Test DMA status
- Clean up
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
- Clean up
stm:
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
tidss:
- Convert to kernel's FIELD_ macros
v3d:
- Improve job management and locking
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmi5Vt0bFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJEGgNwR1TC3ojdpgIAJE+8M0PiEcOX6b5gRqW
kK8ymkVHXXyNbMYst/KsAHLStgyXnI7l2Rhd1ZY3lPO5pm+a7ehwKe+GTpdWoPTF
Eq7uMIgdjNX2Zqwr9QfsRAYAwMvcn6tNVvCbAeUzo7PNHaZXj1Q8K1VHpJV3BbWd
1w+OR2b12IpDx7KA1dFYVkL2ZrAE9B7FOLdrHFAOW75N/bcLwrQ4WREfirOsXGN9
TbqCknB3PQKhjlFC86UU7DGImKdPTYvt72K3pPF0Y4eCYmQoKFYqQsFmsdqUEQsa
Z2jSbXAFKV3DcJwMzEmNFC//6QeqEJFJMvYYqaqzTW9kMnA4anO/8JML0uTWLxRd
0rw=
=NzwW
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2025-09-04' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.18:
Cross-subsystem Changes:
- Update a number of DT bindings for STM32MP25 Arm SoC
Core Changes:
gem:
- Simplify locking for GPUVM
panel-backlight-quirks:
- Add additional quirks for EDID, DMI, brightness
sched:
- Fix race condition in trace code
- Clean up
sysfb:
- Clean up
Driver Changes:
amdgpu:
- Give kernel jobs a unique id for better tracing
amdxdna:
- Improve error reporting
bridge:
- Improve ref counting on bridge management
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
gud:
- Replace simple-KMS pipe with regular atomic helpers
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
ivpu:
- Clean up
nouveau:
- Improve error reporting
panthor:
- Fail VM bind if BO has offset
- Clean up
rcar-du:
- Make number of lanes configurable
rockchip:
- Add support for RK3588 DPTX output
rocket:
- Use kfree() and sizeof() correctly
- Test DMA status
- Clean up
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
- Clean up
stm:
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
tidss:
- Convert to kernel's FIELD_ macros
v3d:
- Improve job management and locking
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250904090932.GA193997@linux.fritz.box
Certain OLED devices malfunction on specific brightness levels.
Specifically, when DP_SOURCE_BACKLIGHT_LEVEL is written to with
the first byte being 0x00 and sometimes 0x01, the panel forcibly
turns off until the device sleeps again.
Below are some examples. This was found by iterating over brighness
ranges while printing DP_SOURCE_BACKLIGHT_LEVEL. It was found that
the screen would malfunction on specific values, and some of them
were collected.
Therefore, introduce a quirk where the minor byte of brightness is
OR'd with 0x03 to avoid the range of invalid values.
This quirk was tested by removing the workarounds and iterating
from 0 to 50_000 value ranges with a cadence of 0.2s/it. The
range of the panel is 1000...400_000, so the values were slightly
interpolated during testing. The custom brightness curve added on
6.15 was disabled.
86016: 10101000000000000
86272: 10101000100000000
87808: 10101011100000000
251648: 111101011100000000
251649: 111101011100000001
86144: 10101000010000000
87809: 10101011100000001
251650: 111101011100000010
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3803
Tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-5-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Currently, the brightness quirk is limited to minimum brightness only.
Refactor it to a structure, so that more quirks can be added in the
future. Reserve 0 value for "no quirk", and use u16 to allow minimum
brightness up to 255.
Tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-3-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Some code needing to know whether a bridge is the last in a chain currently
call drm_bridge_get_next_bridge(). However drm_bridge_get_next_bridge()
will soon increment the refcount of the returned bridge, which would make
such code more annoying to write.
In preparation for drm_bridge_get_next_bridge() to increment the refcount,
as well as to simplify such code, introduce a simple bool function to tell
whether a bridge is the last in the chain.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-5-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
- Add madvise interface (Himal Prasad Ghimiray)
- Add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and
memory attributes (Himal Prasad Ghimiray)
- Handle Firmware reported Hardware Errors notifying userspace with
device wedged uevent (Riana Tauro)
Cross-subsystem Changes:
- Add a vendor-specific recovery method to drm device wedged uevent
(Riana Tauro)
Driver Changes:
- Use same directory structure in debugfs as in sysfs (Michal Wajdeczko)
- Cleanup and future-proof VRAM region initialization (Piotr Piórkowski)
- Add G-states and PCIe link states to debugfs (Soham Purkait)
- Cleanup eustall debug messages (Harish Chegondi)
- Add SR-IOV support to restore Compression Control Surface (CCS) to
Xe2 and later (Satyanarayana K V P)
- Enable SR-IOV PF mode by default on supported platforms without
needing CONFIG_DRM_XE_DEBUG and mark some platforms behind
force_probe as supported (Michal Wajdeczko)
- More targeted log messages (Michal Wajdeczko)
- Cleanup STEER_SEMAPHORE/MCFG_MCR_SELECTOR usage (Nitin Gote)
- Use common code to emit flush (Tvrtko Ursulin)
- Add/extend more HW workarounds and tunings for Xe2 and Xe3
(Sk Anirban, Tangudu Tilak Tirumalesh, Nitin Gote, Chaitanya Kumar Borah)
- Add a generic dependency scheduler to help with TLB invalidations
and future scenarios (Matthew Brost)
- Use DRM scheduler for delayed GT TLB invalidations (Matthew Brost)
- Error out on incorrect device use in configfs
(Michal Wajdeczko, Lucas De Marchi)
- Refactor configfs attributes (Michal Wajdeczko / Lucas De Marchi)
- Allow configuring future VF devices via configfs (Michal Wajdeczko)
- Implement some missing XeLP workarounds (Tvrtko Ursulin)
- Generalize WA BB setup/emission and add support for
mid context restore BB, aka indirect context (Tvrtko Ursulin)
- Prepare the driver to expose mmio regions to userspace
in future (Ilia Levi)
- Add more GuC load error status codes (John Harrison)
- Document DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING (Priyanka Dandamudi)
- Disable CSC and RPM on VFs (Lukasz Laguna, Satyanarayana K V P)
- Fix oops in xe_gem_fault with PREEMPT_RT (Maarten Lankhorst)
- Skip LMTT update if no LMEM was provisioned (Michal Wajdeczko)
- Add support to VF migration (Tomasz Lis)
- Use a helper for guc_waklv_enable functions (Jonathan Cavitt)
- Prepare GPU SVM for migration of THP (Francois Dugast)
- Program LMTT directory pointer on all GTs within a tile
(Piotr Piórkowski)
- Rename XE_WA to XE_GT_WA to better convey its scope vs the device WAs
(Matt Atwood)
- Allow to match devices on PCI devid/vendorid only (Lucas De Marchi)
- Improve PDE PAT index selection (Matthew Brost)
- Consolidate ASID allocation in xe_vm_create() vs
xe_vm_create_ioctl() (Piotr Piórkowski)
- Resize VF BARS to max possible size according to number of VFs
(Michał Winiarski)
- Untangle vm_bind_ioctl cleanup order (Christoph Manszewski)
- Start fixing usage of XE_PAGE_SIZE vs PAGE_SIZE to improve
compatibility with non-x86 arch (Simon Richter)
- Improve tile vs gt initialization order and accounting
(Gustavo Sousa)
- Extend WA kunit test to PTL
- Ensure data is initialized before transferring to pcode
(Stuart Summers)
- Add PSMI support for HW validation (Lucas De Marchi,
Vinay Belgaumkar, Badal Nilawar)
- Improve xe_dma_buf test (Thomas Hellström, Marcin Bernatowicz)
- Fix basename() usage in generator with !glibc (Carlos Llamas)
- Ensure GT is in C0 during resumes (Xin Wang)
- Add TLB invalidation abstraction (Matt Brost, Stuart Summers)
- Make MI_TLB_INVALIDATE conditional on migrate (Matthew Auld)
- Prepare xe_nvm to be initialized early for future use cases
(Riana Tauro)
-----BEGIN PGP SIGNATURE-----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=gqoN
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-08-29' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Add madvise interface (Himal Prasad Ghimiray)
- Add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and
memory attributes (Himal Prasad Ghimiray)
- Handle Firmware reported Hardware Errors notifying userspace with
device wedged uevent (Riana Tauro)
Cross-subsystem Changes:
- Add a vendor-specific recovery method to drm device wedged uevent
(Riana Tauro)
Driver Changes:
- Use same directory structure in debugfs as in sysfs (Michal Wajdeczko)
- Cleanup and future-proof VRAM region initialization (Piotr Piórkowski)
- Add G-states and PCIe link states to debugfs (Soham Purkait)
- Cleanup eustall debug messages (Harish Chegondi)
- Add SR-IOV support to restore Compression Control Surface (CCS) to
Xe2 and later (Satyanarayana K V P)
- Enable SR-IOV PF mode by default on supported platforms without
needing CONFIG_DRM_XE_DEBUG and mark some platforms behind
force_probe as supported (Michal Wajdeczko)
- More targeted log messages (Michal Wajdeczko)
- Cleanup STEER_SEMAPHORE/MCFG_MCR_SELECTOR usage (Nitin Gote)
- Use common code to emit flush (Tvrtko Ursulin)
- Add/extend more HW workarounds and tunings for Xe2 and Xe3
(Sk Anirban, Tangudu Tilak Tirumalesh, Nitin Gote, Chaitanya Kumar Borah)
- Add a generic dependency scheduler to help with TLB invalidations
and future scenarios (Matthew Brost)
- Use DRM scheduler for delayed GT TLB invalidations (Matthew Brost)
- Error out on incorrect device use in configfs
(Michal Wajdeczko, Lucas De Marchi)
- Refactor configfs attributes (Michal Wajdeczko / Lucas De Marchi)
- Allow configuring future VF devices via configfs (Michal Wajdeczko)
- Implement some missing XeLP workarounds (Tvrtko Ursulin)
- Generalize WA BB setup/emission and add support for
mid context restore BB, aka indirect context (Tvrtko Ursulin)
- Prepare the driver to expose mmio regions to userspace
in future (Ilia Levi)
- Add more GuC load error status codes (John Harrison)
- Document DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING (Priyanka Dandamudi)
- Disable CSC and RPM on VFs (Lukasz Laguna, Satyanarayana K V P)
- Fix oops in xe_gem_fault with PREEMPT_RT (Maarten Lankhorst)
- Skip LMTT update if no LMEM was provisioned (Michal Wajdeczko)
- Add support to VF migration (Tomasz Lis)
- Use a helper for guc_waklv_enable functions (Jonathan Cavitt)
- Prepare GPU SVM for migration of THP (Francois Dugast)
- Program LMTT directory pointer on all GTs within a tile
(Piotr Piórkowski)
- Rename XE_WA to XE_GT_WA to better convey its scope vs the device WAs
(Matt Atwood)
- Allow to match devices on PCI devid/vendorid only (Lucas De Marchi)
- Improve PDE PAT index selection (Matthew Brost)
- Consolidate ASID allocation in xe_vm_create() vs
xe_vm_create_ioctl() (Piotr Piórkowski)
- Resize VF BARS to max possible size according to number of VFs
(Michał Winiarski)
- Untangle vm_bind_ioctl cleanup order (Christoph Manszewski)
- Start fixing usage of XE_PAGE_SIZE vs PAGE_SIZE to improve
compatibility with non-x86 arch (Simon Richter)
- Improve tile vs gt initialization order and accounting
(Gustavo Sousa)
- Extend WA kunit test to PTL
- Ensure data is initialized before transferring to pcode
(Stuart Summers)
- Add PSMI support for HW validation (Lucas De Marchi,
Vinay Belgaumkar, Badal Nilawar)
- Improve xe_dma_buf test (Thomas Hellström, Marcin Bernatowicz)
- Fix basename() usage in generator with !glibc (Carlos Llamas)
- Ensure GT is in C0 during resumes (Xin Wang)
- Add TLB invalidation abstraction (Matt Brost, Stuart Summers)
- Make MI_TLB_INVALIDATE conditional on migrate (Matthew Auld)
- Prepare xe_nvm to be initialized early for future use cases
(Riana Tauro)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/nuejxdhnalyok7tzwkrj67dwjgdafwp4mhdejpyyqnrh4f2epq@nlldovuflnbx
Convert XRGB8888 to 2bit grayscale.
It uses drm_fb_xrgb8888_to_gray8() to convert the pixels to gray8 as an
intermediate step before converting to gray2.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-5-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The DW DP TX Controller is compliant with the DisplayPort Specification
Version 1.4 with the following features:
* DisplayPort 1.4a
* Main Link: 1/2/4 lanes
* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
* AUX channel 1Mbps
* Single Stream Transport(SST)
* Multistream Transport (MST)
* Type-C support (alternate mode)
* HDCP 2.2, HDCP 1.3
* Supports up to 8/10 bits per color component
* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
* Pixel clock up to 594MHz
* I2S, SPDIF audio interface
Add library with common helpers to make it can be shared with
other SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Since all users of gem.gpuva.lock_dep_map now rely on the mutex directly
in gpuva, we may remove it. Whether the mutex is used is now tracked by
a flag in gpuvm rather than by whether lock_dep_map is null.
Note that a GEM object may not be pushed to multiple gpuvms that
disagree on the value of this new flag. But that's okay because a single
driver should use the same locking scheme everywhere, and a GEM object
is driver specific (when a GEM is exported with prime, a new GEM object
instance is created from the backing dma-buf).
The flag is present even with CONFIG_LOCKDEP=n because the intent is
that the flag will also cause vm_bo cleanup to become deferred. However,
that will happen in a follow-up patch.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-3-bd89f5a82c0d@google.com
[ Use lockdep_is_held() instead of lock_is_held(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
There are two main ways that GPUVM might be used:
* staged mode, where VM_BIND ioctls update the GPUVM immediately so that
the GPUVM reflects the state of the VM *including* staged changes that
are not yet applied to the GPU's virtual address space.
* immediate mode, where the GPUVM state is updated during run_job(),
i.e., in the DMA fence signalling critical path, to ensure that the
GPUVM and the GPU's virtual address space has the same state at all
times.
Currently, only Panthor uses GPUVM in immediate mode, but the Rust
drivers Tyr and Nova will also use GPUVM in immediate mode, so it is
worth to support both staged and immediate mode well in GPUVM. To use
immediate mode, the GEMs gpuva list must be modified during the fence
signalling path, which means that it must be protected by a lock that is
fence signalling safe.
For this reason, a mutex is added to struct drm_gem_object that is
intended to achieve this purpose. Adding it directly in the GEM object
both makes it easier to use GPUVM in immediate mode, but also makes it
possible to take the gpuva lock from core drm code.
As a follow-up, another change that should probably be made to support
immediate mode is a mechanism to postpone cleanup of vm_bo objects, as
dropping a vm_bo object in the fence signalling path is problematic for
two reasons:
* When using DRM_GPUVM_RESV_PROTECTED, you cannot remove the vm_bo from
the extobj/evicted lists during the fence signalling path.
* Dropping a vm_bo could lead to the GEM object getting destroyed.
The requirement that GEM object cleanup is fence signalling safe is
dubious and likely to be violated in practice.
Panthor already has its own custom implementation of postponing vm_bo
cleanup.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-1-bd89f5a82c0d@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Address the need for a recovery method (firmware flash on Firmware errors)
introduced in the later patches of Xe KMD.
Whenever XE KMD detects a firmware error, a firmware flash is required to
recover the device to normal operation.
The initial proposal to use 'firmware-flash' as a recovery method was
not applicable to other drivers and could cause multiple recovery
methods specific to vendors to be added.
To address this a more generic 'vendor-specific' method is introduced,
guiding users to refer to vendor specific documentation and system logs
for detailed vendor specific recovery procedure.
Add a recovery method 'WEDGED=vendor-specific' for such errors.
Vendors must provide additional recovery documentation if this method
is used.
It is the responsibility of the consumer to refer to the correct vendor
specific documentation and usecase before attempting a recovery.
For example: If driver is XE KMD, the consumer must refer
to the documentation of 'Device Wedging' under 'Documentation/gpu/xe/'.
v2: fix documentation (Raag)
v3: add more details to commit message (Sima, Rodrigo, Raag)
add an example script to the documentation (Raag)
v4: use consistent naming (Raag)
v5: fix commit message
v6: add more documentation
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250826063419.3022216-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add helper drm_crtc_fill_palette_332(), which fills palettes with
RGB332 color data. Each color in RGB332 format serves as an index
into an 8-bit palette that stores the corresponding component-based
colors.
Vesadrm will use the new helper to emulate RGB formats on top of
framebuffers in C8 format.
v2:
- add comments on bit operations (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-6-tzimmermann@suse.de
Sync with drm-misc-next which is necessary for changes in gpuvm
and gpusvm that will be used in xe.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Some touch controllers have to be powered on after the panel's backlight
is enabled. To support these controllers, introduce .panel_enabled() and
.panel_disabling() to panel_follower_funcs and use them to power on the
device after the panel and its backlight are enabled.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-1-treapking@chromium.org
Some bridges can update HDCP status based on userspace requests if they
support HDCP.
The HDCP property is created after connector initialization and before
registration, just like other connector properties.
Add the content protection property to the connector if a bridge
supports HDCP.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250812082135.3351172-2-fshao@chromium.org
