[ Upstream commit 390b3a300d7872cef9588f003b204398be69ce08 ]
The kernel forbids the creation of non-FDB nexthop groups with FDB
nexthops:
# ip nexthop add id 1 via 192.0.2.1 fdb
# ip nexthop add id 2 group 1
Error: Non FDB nexthop group cannot have fdb nexthops.
And vice versa:
# ip nexthop add id 3 via 192.0.2.2 dev dummy1
# ip nexthop add id 4 group 3 fdb
Error: FDB nexthop group can only have fdb nexthops.
However, as long as no routes are pointing to a non-FDB nexthop group,
the kernel allows changing the type of a nexthop from FDB to non-FDB and
vice versa:
# ip nexthop add id 5 via 192.0.2.2 dev dummy1
# ip nexthop add id 6 group 5
# ip nexthop replace id 5 via 192.0.2.2 fdb
# echo $?
0
This configuration is invalid and can result in a NPD [1] since FDB
nexthops are not associated with a nexthop device:
# ip route add 198.51.100.1/32 nhid 6
# ping 198.51.100.1
Fix by preventing nexthop FDB status change while the nexthop is in a
group:
# ip nexthop add id 7 via 192.0.2.2 dev dummy1
# ip nexthop add id 8 group 7
# ip nexthop replace id 7 via 192.0.2.2 fdb
Error: Cannot change nexthop FDB status while in a group.
[1]
BUG: kernel NULL pointer dereference, address: 00000000000003c0
[...]
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:fib_lookup_good_nhc+0x1e/0x80
[...]
Call Trace:
<TASK>
fib_table_lookup+0x541/0x650
ip_route_output_key_hash_rcu+0x2ea/0x970
ip_route_output_key_hash+0x55/0x80
__ip4_datagram_connect+0x250/0x330
udp_connect+0x2b/0x60
__sys_connect+0x9c/0xd0
__x64_sys_connect+0x18/0x20
do_syscall_64+0xa4/0x2a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 38428d6871 ("nexthop: support for fdb ecmp nexthops")
Reported-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c9a4d2.050a0220.3c6139.0e63.GAE@google.com/
Tested-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca9f9cdc4de97d0221100b11224738416696163c ]
Currently, alloc_skb_with_frags() will only fill (MAX_SKB_FRAGS - 1)
slots. I think it should use all MAX_SKB_FRAGS slots, as callers of
alloc_skb_with_frags() will size their allocation of frags based
on MAX_SKB_FRAGS.
This issue was discovered via a test patch that sets 'order' to 0
in alloc_skb_with_frags(), which effectively tests/simulates high
fragmentation. In this case sendmsg() on unix sockets will fail every
time for large allocations. If the PAGE_SIZE is 4K, then data_len will
request 68K or 17 pages, but alloc_skb_with_frags() can only allocate
64K in this case or 16 pages.
Fixes: 09c2c90705 ("net: allow alloc_skb_with_frags() to allocate bigger packets")
Signed-off-by: Jason Baron <jbaron@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250922191957.2855612-1-jbaron@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1488af7b8b5f9896ea88ee35aa3301713f72737c ]
hci_resume_advertising_sync is suppose to resume all instance paused by
hci_pause_advertising_sync, this logic is used for procedures are only
allowed when not advertising, but instance 0x00 was not being
re-enabled.
Fixes: ad383c2c65 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd8ae32e4e4652db55bce6b9c79267d8946765a9 ]
x->id.spi == 0 means "no SPI assigned", but since commit
94f39804d8 ("xfrm: Duplicate SPI Handling"), we now create states
and add them to the byspi list with this value.
__xfrm_state_delete doesn't remove those states from the byspi list,
since they shouldn't be there, and this shows up as a UAF the next
time we go through the byspi list.
Reported-by: syzbot+a25ee9d20d31e483ba7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a25ee9d20d31e483ba7b
Fixes: 94f39804d8 ("xfrm: Duplicate SPI Handling")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2293c57484ae64c9a3c847c8807db8c26a3a4d41 upstream.
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't.
The RFC8684 [1] is strict about that:
(...) therefore the receiver MUST NOT try to open any additional
subflows toward this address and port.
So it is important to tell the userspace about that as it is responsible
for the respect of this flag.
When a new connection is created and established, the Netlink events
now contain the existing but not currently used 'flags' attribute. When
MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows
to the initial IP address and port -- info that are also part of the
event -- can be established.
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1]
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mptcp_pm.yaml, because the indentation has been modified
in commit ec362192aa ("netlink: specs: fix up indentation errors"),
which is not in this version. Applying the same modifications, but at
a different level. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f755be0b1ff429a2ecf709beeb1bcd7abc111c2b upstream.
When the MPTCP DATA FIN have been ACKed, there is no more MPTCP related
metadata to exchange, and all subflows can be safely shutdown.
Before this patch, the subflows were actually terminated at 'close()'
time. That's certainly fine most of the time, but not when the userspace
'shutdown()' a connection, without close()ing it. When doing so, the
subflows were staying in LAST_ACK state on one side -- and consequently
in FIN_WAIT2 on the other side -- until the 'close()' of the MPTCP
socket.
Now, when the DATA FIN have been ACKed, all subflows are shutdown. A
consequence of this is that the TCP 'FIN' flag can be set earlier now,
but the end result is the same. This affects the packetdrill tests
looking at the end of the MPTCP connections, but for a good reason.
Note that tcp_shutdown() will check the subflow state, so no need to do
that again before calling it.
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Cc: stable@vger.kernel.org
Fixes: 16a9a9da17 ("mptcp: Add helper to process acks of DATA_FIN")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-1-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4351ca3fcb3ffecf12631b4996bf085a2dad0db6 upstream.
We need to increment i_fastreg_wrs before we bail out from
rds_ib_post_reg_frmr().
We have a fixed budget of how many FRWR operations that can be
outstanding using the dedicated QP used for memory registrations and
de-registrations. This budget is enforced by the atomic_t
i_fastreg_wrs. If we bail out early in rds_ib_post_reg_frmr(), we will
"leak" the possibility of posting an FRWR operation, and if that
accumulates, no FRWR operation can be carried out.
Fixes: 1659185fb4 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Fixes: 3a2886cca7 ("net/rds: Keep track of and wait for FRWR segments in use upon shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250911133336.451212-1-haakon.bugge@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6f56a44e4c1014b08859dcf04ed246500e310e5 upstream.
Since commit 7d5e9737ef ("net: rfkill: gpio: get the name and type from
device property") rfkill_find_type() gets called with the possibly
uninitialized "const char *type_name;" local variable.
On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"
acpi_device, the rfkill->type is set based on the ACPI acpi_device_id:
rfkill->type = (unsigned)id->driver_data;
and there is no "type" property so device_property_read_string() will fail
and leave type_name uninitialized, leading to a potential crash.
rfkill_find_type() does accept a NULL pointer, fix the potential crash
by initializing type_name to NULL.
Note likely sofar this has not been caught because:
1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device
2. The stack happened to contain NULL where type_name is stored
Fixes: 7d5e9737ef ("net: rfkill: gpio: get the name and type from device property")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0aeb54ac4cd5cf8f60131b4d9ec0b6dc9c27b20d ]
Normally we wait for the socket to buffer up the whole record
before we service it. If the socket has a tiny buffer, however,
we read out the data sooner, to prevent connection stalls.
Make sure that we abort the connection when we find out late
that the record is actually invalid. Retrying the parsing is
fine in itself but since we copy some more data each time
before we parse we can overflow the allocated skb space.
Constructing a scenario in which we're under pressure without
enough data in the socket to parse the length upfront is quite
hard. syzbot figured out a way to do this by serving us the header
in small OOB sends, and then filling in the recvbuf with a large
normal send.
Make sure that tls_rx_msg_size() aborts strp, if we reach
an invalid record there's really no way to recover.
Reported-by: Lee Jones <lee@kernel.org>
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250917002814.1743558-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92da495cb65719583aa06bc946aeb18a10e1e6e2 ]
When TFO is used, the check to see if the 'C' flag (deny join id0) was
set was bypassed.
This flag can be set when TFO is used, so the check should also be done
when TFO is used.
Note that the set_fully_established label is also used when a 4th ACK is
received. In this case, deny_join_id0 will not be set.
Fixes: dfc8d06030 ("mptcp: implement delayed seq generation for passive fastopen")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-4-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96939cec994070aa5df852c10fad5fc303a97ea3 ]
When a SYN containing the 'C' flag (deny join id0) was received, this
piece of information was not propagated to the path-manager.
Even if this flag is mainly set on the server side, a client can also
tell the server it cannot try to establish new subflows to the client's
initial IP address and port. The server's PM should then record such
info when received, and before sending events about the new connection.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-1-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e7bba08923ebc675b1f0e0e0959e68e53047838 ]
A NULL pointer dereference can occur in tcp_ao_finish_connect() during a
connect() system call on a socket with a TCP-AO key added and TCP_REPAIR
enabled.
The function is called with skb being NULL and attempts to dereference it
on tcp_hdr(skb)->seq without a prior skb validation.
Fix this by checking if skb is NULL before dereferencing it.
The commentary is taken from bpf_skops_established(), which is also called
in the same flow. Unlike the function being patched,
bpf_skops_established() validates the skb before dereferencing it.
int main(void){
struct sockaddr_in sockaddr;
struct tcp_ao_add tcp_ao;
int sk;
int one = 1;
memset(&sockaddr,'\0',sizeof(sockaddr));
memset(&tcp_ao,'\0',sizeof(tcp_ao));
sk = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
sockaddr.sin_family = AF_INET;
memcpy(tcp_ao.alg_name,"cmac(aes128)",12);
memcpy(tcp_ao.key,"ABCDEFGHABCDEFGH",16);
tcp_ao.keylen = 16;
memcpy(&tcp_ao.addr,&sockaddr,sizeof(sockaddr));
setsockopt(sk, IPPROTO_TCP, TCP_AO_ADD_KEY, &tcp_ao,
sizeof(tcp_ao));
setsockopt(sk, IPPROTO_TCP, TCP_REPAIR, &one, sizeof(one));
sockaddr.sin_family = AF_INET;
sockaddr.sin_port = htobe16(123);
inet_aton("127.0.0.1", &sockaddr.sin_addr);
connect(sk,(struct sockaddr *)&sockaddr,sizeof(sockaddr));
return 0;
}
$ gcc tcp-ao-nullptr.c -o tcp-ao-nullptr -Wall
$ unshare -Urn
BUG: kernel NULL pointer dereference, address: 00000000000000b6
PGD 1f648d067 P4D 1f648d067 PUD 1982e8067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:tcp_ao_finish_connect (net/ipv4/tcp_ao.c:1182)
Fixes: 7c2ffaf21b ("net/tcp: Calculate TCP-AO traffic keys")
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250911230743.2551-3-anderson@allelesecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a33b375ab5b3a9897a0ab76be8258d9f6b748628 ]
The variable ret is declared as a u32 type, but it is assigned a value
of -EOPNOTSUPP. Since unsigned types cannot correctly represent negative
values, the type of ret should be changed to int.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250825022911.139377-1-liaoyuanhong@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e2f3213e85eba00acb4cfe6d71647892d63c3a1 ]
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250826085437.3493-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 30c1d25b9870d551be42535067d5481668b5e6f3 upstream.
Blamed commit broke the check for a null scratch map:
- if (unlikely(!m || !*raw_cpu_ptr(m->scratch)))
+ if (unlikely(!raw_cpu_ptr(m->scratch)))
This should have been "if (!*raw_ ...)".
Use the pattern of the avx2 version which is more readable.
This can only be reproduced if avx2 support isn't available.
Fixes: d8d871a35c ("netfilter: nft_set_pipapo: merge pipapo_get/lookup")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 393c841fe4333cdd856d0ca37b066d72746cfaa6 ]
hsr_port_get_hsr() iterates over ports using hsr_for_each_port(),
but many of its callers do not hold the required RCU lock.
Switch to hsr_for_each_port_rtnl(), since most callers already hold
the rtnl lock. After review, all callers are covered by either the rtnl
lock or the RCU lock, except hsr_dev_xmit(). Fix this by adding an
RCU read lock there.
Fixes: c5a7591172 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8884c693991333ae065830554b9b0c96590b1bb2 ]
hsr_for_each_port is called in many places without holding the RCU read
lock, this may trigger warnings on debug kernels. Most of the callers
are actually hold rtnl lock. So add a new helper hsr_for_each_port_rtnl
to allow callers in suitable contexts to iterate ports safely without
explicit RCU locking.
This patch only fixed the callers that is hold rtnl lock. Other caller
issues will be fixed in later patches.
Fixes: c5a7591172 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a8a63a530 ]
This patch adds support for VLAN ctag based filtering at slave devices.
The slave ethernet device may be capable of filtering ethernet packets
based on VLAN ID. This requires that when the VLAN interface is created
over an HSR/PRP interface, it passes the VID information to the
associated slave ethernet devices so that it updates the hardware
filters to filter ethernet frames based on VID. This patch adds the
required functions to propagate the vid information to the slave
devices.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20241106091710.3308519-3-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8884c6939913 ("hsr: use rtnl lock when iterating over ports")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2f742c846cab9afc5953a5d8f17b54922dcc723 ]
The hash, hash_fast, rhash and bitwise sets may indicate no result even
though a matching element exists during a short time window while other
cpu is finalizing the transaction.
This happens when the hash lookup/bitwise lookup function has picked up
the old genbit, right before it was toggled by nf_tables_commit(), but
then the same cpu managed to unlink the matching old element from the
hash table:
cpu0 cpu1
has added new elements to clone
has marked elements as being
inactive in new generation
perform lookup in the set
enters commit phase:
A) observes old genbit
increments base_seq
I) increments the genbit
II) removes old element from the set
B) finds matching element
C) returns no match: found
element is not valid in old
generation
Next lookup observes new genbit and
finds matching e2.
Consider a packet matching element e1, e2.
cpu0 processes following transaction:
1. remove e1
2. adds e2, which has same key as e1.
P matches both e1 and e2. Therefore, cpu1 should always find a match
for P. Due to above race, this is not the case:
cpu1 observed the old genbit. e2 will not be considered once it is found.
The element e1 is not found anymore if cpu0 managed to unlink it from the
hlist before cpu1 found it during list traversal.
The situation only occurs for a brief time period, lookups happening
after I) observe new genbit and return e2.
This problem exists in all set types except nft_set_pipapo, so fix it once
in nft_lookup rather than each set ops individually.
Sample the base sequence counter, which gets incremented right before the
genbit is changed.
Then, if no match is found, retry the lookup if the base sequence was
altered in between.
If the base sequence hasn't changed:
- No update took place: no-match result is expected.
This is the common case. or:
- nf_tables_commit() hasn't progressed to genbit update yet.
Old elements were still visible and nomatch result is expected, or:
- nf_tables_commit updated the genbit:
We picked up the new base_seq, so the lookup function also picked
up the new genbit, no-match result is expected.
If the old genbit was observed, then nft_lookup also picked up the old
base_seq: nft_lookup_should_retry() returns true and relookup is performed
in the new generation.
This problem was added when the unconditional synchronize_rcu() call
that followed the current/next generation bit toggle was removed.
Thanks to Pablo Neira Ayuso for reviewing an earlier version of this
patchset, for suggesting re-use of existing base_seq and placement of
the restart loop in nft_set_do_lookup().
Fixes: 0cbc06b3fa ("netfilter: nf_tables: remove synchronize_rcu in commit phase")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11fe5a82e53ac3581a80c88e0e35fb8a80e15f48 ]
This function was added for retpoline mitigation and is replaced by a
static inline helper if mitigations are not enabled.
Enable this helper function unconditionally so next patch can add a lookup
restart mechanism to fix possible false negatives while transactions are
in progress.
Adding lookup restarts in nft_lookup_eval doesn't work as nft_objref would
then need the same copypaste loop.
This patch is separate to ease review of the actual bug fix.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: b2f742c846ca ("netfilter: nf_tables: restart set lookup on base_seq change")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64102d9bbc3d41dac5188b8fba75b1344c438970 ]
This will soon be read from packet path around same time as the gencursor.
Both gencursor and base_seq get incremented almost at the same time, so
it makes sense to place them in the same structure.
This doesn't increase struct net size on 64bit due to padding.
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: b2f742c846ca ("netfilter: nf_tables: restart set lookup on base_seq change")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1050dd071 ]
Restore commit 28339b21a3 ("netfilter: nf_tables: do not send complete
notification of deletions") and fix it:
- Avoid upfront modification of 'event' variable so the conditionals
become effective.
- Always include NFTA_OBJ_TYPE attribute in object notifications, user
space requires it for proper deserialisation.
- Catch DESTROY events, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: b2f742c846ca ("netfilter: nf_tables: restart set lookup on base_seq change")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a60f7bf4a1524d8896b76ba89623080aebf44272 ]
When the rbtree lookup function finds a match in the rbtree, it sets the
range start interval to a potentially inactive element.
Then, after tree lookup, if the matching element is inactive, it returns
NULL and suppresses a matching result.
This is wrong and leads to false negative matches when a transaction has
already entered the commit phase.
cpu0 cpu1
has added new elements to clone
has marked elements as being
inactive in new generation
perform lookup in the set
enters commit phase:
I) increments the genbit
A) observes new genbit
B) finds matching range
C) returns no match: found
range invalid in new generation
II) removes old elements from the tree
C New nft_lookup happening now
will find matching element,
because it is no longer
obscured by old, inactive one.
Consider a packet matching range r1-r2:
cpu0 processes following transaction:
1. remove r1-r2
2. add r1-r3
P is contained in both ranges. Therefore, cpu1 should always find a match
for P. Due to above race, this is not the case:
cpu1 does find r1-r2, but then ignores it due to the genbit indicating
the range has been removed. It does NOT test for further matches.
The situation persists for all lookups until after cpu0 hits II) after
which r1-r3 range start node is tested for the first time.
Move the "interval start is valid" check ahead so that tree traversal
continues if the starting interval is not valid in this generation.
Thanks to Stefan Hanreich for providing an initial reproducer for this
bug.
Reported-by: Stefan Hanreich <s.hanreich@proxmox.com>
Fixes: c1eda3c639 ("netfilter: nft_rbtree: ignore inactive matching element with no descendants")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4eaca2e1052adfd67bed0a36a9d4b8e515666e4 ]
The pipapo set type is special in that it has two copies of its
datastructure: one live copy containing only valid elements and one
on-demand clone used during transaction where adds/deletes happen.
This clone is not visible to the datapath.
This is unlike all other set types in nftables, those all link new
elements into their live hlist/tree.
For those sets, the lookup functions must skip the new elements while the
transaction is ongoing to ensure consistency.
As the clone is shallow, removal does have an effect on the packet path:
once the transaction enters the commit phase the 'gencursor' bit that
determines which elements are active and which elements should be ignored
(because they are no longer valid) is flipped.
This causes the datapath lookup to ignore these elements if they are found
during lookup.
This opens up a small race window where pipapo has an inconsistent view of
the dataset from when the transaction-cpu flipped the genbit until the
transaction-cpu calls nft_pipapo_commit() to swap live/clone pointers:
cpu0 cpu1
has added new elements to clone
has marked elements as being
inactive in new generation
perform lookup in the set
enters commit phase:
I) increments the genbit
A) observes new genbit
removes elements from the clone so
they won't be found anymore
B) lookup in datastructure
can't see new elements yet,
but old elements are ignored
-> Only matches elements that
were not changed in the
transaction
II) calls nft_pipapo_commit(), clone
and live pointers are swapped.
C New nft_lookup happening now
will find matching elements.
Consider a packet matching range r1-r2:
cpu0 processes following transaction:
1. remove r1-r2
2. add r1-r3
P is contained in both ranges. Therefore, cpu1 should always find a match
for P. Due to above race, this is not the case:
cpu1 does find r1-r2, but then ignores it due to the genbit indicating
the range has been removed.
At the same time, r1-r3 is not visible yet, because it can only be found
in the clone.
The situation persists for all lookups until after cpu0 hits II).
The fix is easy: Don't check the genbit from pipapo lookup functions.
This is possible because unlike the other set types, the new elements are
not reachable from the live copy of the dataset.
The clone/live pointer swap is enough to avoid matching on old elements
while at the same time all new elements are exposed in one go.
After this change, step B above returns a match in r1-r2.
This is fine: r1-r2 only becomes truly invalid the moment they get freed.
This happens after a synchronize_rcu() call and rcu read lock is held
via netfilter hook traversal (nf_hook_slow()).
Cc: Stefano Brivio <sbrivio@redhat.com>
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8a7c2c608180f3b4e51dc958b3861242dcdd76d ]
Dan Carpenter says:
Commit 17a20e09f0 ("netfilter: nft_set: remove one argument from
lookup and update functions") [..] leads to the following Smatch
static checker warning:
net/netfilter/nft_set_pipapo_avx2.c:1269 nft_pipapo_avx2_lookup()
error: uninitialized symbol 'ext'.
Fix this by initing ext to NULL and set it only once we've found
a match.
Fixes: 17a20e09f0 ("netfilter: nft_set: remove one argument from lookup and update functions")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netfilter-devel/aJBzc3V5wk-yPOnH@stanley.mountain/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8d871a35c ]
The matching algorithm has implemented thrice:
1. data path lookup, generic version
2. data path lookup, avx2 version
3. control plane lookup
Merge 1 and 3 by refactoring pipapo_get as a common helper, then make
nft_pipapo_lookup and nft_pipapo_get both call the common helper.
Aside from the code savings this has the benefit that we no longer allocate
temporary scratch maps for each control plane get and insertion operation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17a20e09f0 ]
Return the extension pointer instead of passing it as a function
argument to be filled in by the callee.
As-is, whenever false is returned, the extension pointer is not used.
For all set types, when true is returned, the extension pointer was set
to the matching element.
Only exception: nft_set_bitmap doesn't support extensions.
Return a pointer to a static const empty element extension container.
return false -> return NULL
return true -> return the elements' extension pointer.
This saves one function argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06e02da29f6f1a45fc07bd60c7eaf172dc21e334 ]
Since j1939_sk_bind() and j1939_sk_release() call j1939_local_ecu_put()
when J1939_SOCK_BOUND was already set, but the error handling path for
j1939_sk_bind() will not set J1939_SOCK_BOUND when j1939_local_ecu_get()
fails, j1939_local_ecu_get() needs to undo priv->ents[sa].nusers++ when
j1939_local_ecu_get() returns an error.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/e7f80046-4ff7-4ce2-8ad8-7c3c678a42c9@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f214744c8a27c3c1da6b538c232da22cd027530e ]
Commit 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct
callback") expects that a call to j1939_priv_put() can be unconditionally
delayed until j1939_sk_sock_destruct() is called. But a refcount leak will
happen when j1939_sk_bind() is called again after j1939_local_ecu_get()
from previous j1939_sk_bind() call returned an error. We need to call
j1939_priv_put() before j1939_sk_bind() returns an error.
Fixes: 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/4f49a1bc-a528-42ad-86c0-187268ab6535@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3c674db356c4303804b2415e7c2b11776cdd8c3 ]
If a GSO skb is sent through a Geneve tunnel and if Geneve options are
added, the split GSO skb might not fit in the MTU anymore and an ICMP
frag needed packet can be generated. In such case the ICMP packet might
go through the segmentation logic (and dropped) later if it reaches a
path were the GSO status is checked and segmentation is required.
This is especially true when an OvS bridge is used with a Geneve tunnel
attached to it. The following set of actions could lead to the ICMP
packet being wrongfully segmented:
1. An skb is constructed by the TCP layer (e.g. gso_type SKB_GSO_TCPV4,
segs >= 2).
2. The skb hits the OvS bridge where Geneve options are added by an OvS
action before being sent through the tunnel.
3. When the skb is xmited in the tunnel, the split skb does not fit
anymore in the MTU and iptunnel_pmtud_build_icmp is called to
generate an ICMP fragmentation needed packet. This is done by reusing
the original (GSO!) skb. The GSO metadata is not cleared.
4. The ICMP packet being sent back hits the OvS bridge again and because
skb_is_gso returns true, it goes through queue_gso_packets...
5. ...where __skb_gso_segment is called. The skb is then dropped.
6. Note that in the above example on re-transmission the skb won't be a
GSO one as it would be segmented (len > MSS) and the ICMP packet
should go through.
Fix this by resetting the GSO information before reusing an skb in
iptunnel_pmtud_build_icmp and iptunnel_pmtud_build_icmpv6.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Reported-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20250904125351.159740-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8625f5748fea960d2af4f3c3e9891ee8f6f80906 ]
The bridge driver currently tolerates options that it does not recognize.
Instead, it should bounce them.
Fixes: a428afe82f ("net: bridge: add support for user-controlled bool options")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/e6fdca3b5a8d54183fbda075daffef38bdd7ddce.1757070067.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dbfb0363224f6da56f6655d596dc5097308d6f5 ]
Per family bind/unbind callbacks were introduced to allow families
to track multicast group consumer presence, e.g. to start or stop
producing events depending on listeners.
However, in genl_bind() the bind() callback was invoked even if
capability checks failed and ret was set to -EPERM. This means that
callbacks could run on behalf of unauthorized callers while the
syscall still returned failure to user space.
Fix this by only invoking bind() after "if (ret) break;" check
i.e. after permission checks have succeeded.
Fixes: 3de21a8990 ("genetlink: Add per family bind/unbind callbacks")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250905135731.3026965-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cdbc9836c7afadad68f374791738f118263c5371 upstream.
There is a place where generic code in messenger.c is reading and
another place where it is writing to con->v1 union member without
checking that the union member is active (i.e. msgr1 is in use).
On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,
so such a read is almost guaranteed to return a bogus value instead of
0 when msgr2 is in use. This ends up being fairly benign because the
side effect is just the invalidation of the authorizer and successive
fetching of new tickets.
con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that
it's being written to can cause more serious consequences, but luckily
it's not something that happens often.
Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 648de37416b301f046f62f1b65715c7fa8ebaa67 upstream.
Users reported a scenario where MPTCP connections that were configured
with SO_KEEPALIVE prior to connect would fail to enable their keepalives
if MTPCP fell back to TCP mode.
After investigating, this affects keepalives for any connection where
sync_socket_options is called on a socket that is in the closed or
listening state. Joins are handled properly. For connects,
sync_socket_options is called when the socket is still in the closed
state. The tcp_set_keepalive() function does not act on sockets that
are closed or listening, hence keepalive is not immediately enabled.
Since the SO_KEEPOPEN flag is absent, it is not enabled later in the
connect sequence via tcp_finish_connect. Setting the keepalive via
sockopt after connect does work, but would not address any subsequently
created flows.
Fortunately, the fix here is straight-forward: set SOCK_KEEPOPEN on the
subflow when calling sync_socket_options.
The fix was valdidated both by using tcpdump to observe keepalive
packets not being sent before the fix, and being sent after the fix. It
was also possible to observe via ss that the keepalive timer was not
enabled on these sockets before the fix, but was enabled afterwards.
Fixes: 1b3e7ede13 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY")
Cc: stable@vger.kernel.org
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/aL8dYfPZrwedCIh9@templeofstupid.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 199cd9e8d14bc14bdbd1fa3031ce26dac9781507 upstream.
This reverts commit 14e41b16e8.
This patch breaks the LTP acct02 test, so let's revert and look for a
better solution.
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Harshvardhan Jha <harshvardhan.j.jha@oracle.com>
Link: https://lore.kernel.org/linux-nfs/7d4d57b0-39a3-49f1-8ada-60364743e3b4@sirena.org.uk/
Cc: stable@vger.kernel.org # 6.15.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a3967baad4d533dc254c31e0d221e51c8d223d58 ]
syzbot reported the splat below. [0]
The repro does the following:
1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes)
2. Attach the prog to a SOCKMAP
3. Add a socket to the SOCKMAP
4. Activate fault injection
5. Send data less than cork_bytes
At 5., the data is carried over to the next sendmsg() as it is
smaller than the cork_bytes specified by bpf_msg_cork_bytes().
Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold
the data, but this fails silently due to fault injection + __GFP_NOWARN.
If the allocation fails, we need to revert the sk->sk_forward_alloc
change done by sk_msg_alloc().
Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate
psock->cork.
The "*copied" also needs to be updated such that a proper error can
be returned to the caller, sendmsg. It fails to allocate psock->cork.
Nothing has been corked so far, so this patch simply sets "*copied"
to 0.
[0]:
WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983
Modules linked in:
CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156
Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc
RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246
RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80
RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000
RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4
R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380
R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872
FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__sk_destruct+0x86/0x660 net/core/sock.c:2339
rcu_do_batch kernel/rcu/tree.c:2605 [inline]
rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861
handle_softirqs+0x286/0x870 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
invoke_softirq kernel/softirq.c:453 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680
irq_exit_rcu+0x9/0x30 kernel/softirq.c:696
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052
</IRQ>
Fixes: 4f738adba3 ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Reported-by: syzbot+4cabd1d2fa917a456db8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c0b6b5.050a0220.3c6139.0013.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250909232623.4151337-1-kuniyu@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9559d2fffd4f9b892165eed48198a0e5cb8504e6 ]
xs_sock_recv_cmsg was failing to call xs_sock_process_cmsg for any cmsg
type other than TLS_RECORD_TYPE_ALERT (TLS_RECORD_TYPE_DATA, and other
values not handled.) Based on my reading of the previous commit
(cc5d5908: sunrpc: fix client side handling of tls alerts), it looks
like only iov_iter_revert should be conditional on TLS_RECORD_TYPE_ALERT
(but that other cmsg types should still call xs_sock_process_cmsg). On
my machine, I was unable to connect (over mtls) to an NFS share hosted
on FreeBSD. With this patch applied, I am able to mount the share again.
Fixes: cc5d59081f ("sunrpc: fix client side handling of tls alerts")
Signed-off-by: Justin Worrell <jworrell@gmail.com>
Reviewed-and-tested-by: Scott Mayhew <smayhew@redhat.com>
Link: https://lore.kernel.org/r/20250904211038.12874-3-jworrell@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 99379f5872 upstream.
Provide a trivial implementation for the .support_eee() method which
switch drivers can use to simply indicate that they support EEE on
all their user ports.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL149-006cZJ-JJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Harshit: Resolve contextual conflicts due to missing commit:
5397706165 ("net: dsa: remove obsolete phylink dsa_switch operations")
and commit: ecb595ebba ("net: dsa: remove
dsa_port_phylink_mac_select_pcs()") in 6.12.y ]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9723a77318 upstream.
Add a hook to determine whether the switch supports EEE. This will
return false if the switch does not, or true if it does. If the
method is not implemented, we assume (currently) that the switch
supports EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL144-006cZD-El@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d77b6ff0ce35a6d0b0b7b9581bc3f76d041d4087 upstream.
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing.
Fixes: 2df5278b02 ("batman-adv: network coding - receive coded packets and decode them")
Cc: stable@vger.kernel.org
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0a228624bcc00af41f281a2a84c928595a74c17d ]
When device_register() return error in atm_register_sysfs(), which can be
triggered by kzalloc fail in device_private_init() or other reasons,
kmemleak reports the following memory leaks:
unreferenced object 0xffff88810182fb80 (size 8):
comm "insmod", pid 504, jiffies 4294852464
hex dump (first 8 bytes):
61 64 75 6d 6d 79 30 00 adummy0.
backtrace (crc 14dfadaf):
__kmalloc_node_track_caller_noprof+0x335/0x450
kvasprintf+0xb3/0x130
kobject_set_name_vargs+0x45/0x120
dev_set_name+0xa9/0xe0
atm_register_sysfs+0xf3/0x220
atm_dev_register+0x40b/0x780
0xffffffffa000b089
do_one_initcall+0x89/0x300
do_init_module+0x27b/0x7d0
load_module+0x54cd/0x5ff0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x32c/0x610
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xa8/0x270
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When device_create_file() return error in atm_register_sysfs(), the same
issue also can be triggered.
Function put_device() should be called to release kobj->name memory and
other device resource, instead of kfree().
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901063537.1472221-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8156210d36a43e76372312c87eb5ea3dbb405a85 ]
Bernard Pidoux reported a regression apparently caused by commit
c353e8983e ("net: introduce per netns packet chains").
skb->dev becomes NULL and we crash in __netif_receive_skb_core().
Before above commit, different kind of bugs or corruptions could happen
without a major crash.
But the root cause is that ax25_kiss_rcv() can queue/mangle input skb
without checking if this skb is shared or not.
Many thanks to Bernard Pidoux for his help, diagnosis and tests.
We had a similar issue years ago fixed with commit 7aaed57c5c
("phonet: properly unshare skbs in phonet_rcv()").
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Bernard Pidoux <f6bvp@free.fr>
Closes: https://lore.kernel.org/netdev/1713f383-c538-4918-bc64-13b3288cd542@free.fr/
Tested-by: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joerg Reuter <jreuter@yaina.de>
Cc: David Ranch <dranch@trinnet.net>
Cc: Folkert van Heusden <folkert@vanheusden.com>
Reviewed-by: Dan Cross <crossd@gmail.com>
Link: https://patch.msgid.link/20250902124642.212705-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a125c8fb9ddbcb0602103a50727a476fd30dec01 ]
In mctp_getsockopt(), unrecognized options currently return -EINVAL.
In contrast, mctp_setsockopt() returns -ENOPROTOOPT for unknown
options.
Update mctp_getsockopt() to also return -ENOPROTOOPT for unknown
options. This aligns the behavior of getsockopt() and setsockopt(),
and matches the standard kernel socket API convention for handling
unsupported options.
Fixes: 99ce45d5e7 ("mctp: Implement extended addressing")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250902102059.1370008-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc282f73bc0cbdf3ee7af2f2d3a2ef4e6b19242d ]
Currently SMC code is validating the reserved bits while parsing the incoming
CLC decline message & when this validation fails, its treated as a protocol
error. As a result, the SMC connection is terminated instead of falling back to
TCP. As per RFC7609[1] specs we shouldn't be validating the reserved bits that
is part of CLC message. This patch fixes this issue.
CLC Decline message format can viewed here[2].
[1] https://datatracker.ietf.org/doc/html/rfc7609#page-92
[2] https://datatracker.ietf.org/doc/html/rfc7609#page-105
Fixes: 8ade200c26 ("net/smc: add v2 format of CLC decline message")
Signed-off-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20250902082041.98996-1-mjambigi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a51160f8da850a65afbf165f5bbac7ffb388bf74 ]
The inetdev_init() function never returns NULL. Check for error
pointers instead.
Fixes: 22600596b6 ("ipv4: give an IPv4 dev to blackhole_netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/aLaQWL9NguWmeM1i@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62b635dcd69c4fde7ce1de4992d71420a37e51e3 ]
If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it would
lead to memory corruption so add some bounds checking.
Fixes: c38c701851 ("wifi: cfg80211: Set SSID if it is not already set")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/0aaaae4a3ed37c6252363c34ae4904b1604e8e32.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
