commit c0d36727bf39bb16ef0a67ed608e279535ebf0da upstream.
Ensure that set_ent is always set since only drbg provides it.
Fixes: 77ebdabe8d ("crypto: af_alg - add extra parameters for DRBG interface")
Reported-by: Yiqi Sun <sunyiqixm@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2ce2453413d429e302659abc5ace634e873f6f5 upstream.
Devices with power.no_pm set are not expected to need any power
management at all, so modify device_set_pm_not_required() to set
power.no_callbacks for them too in case runtime PM will be enabled
for any of them (which in principle may be done for convenience if
such a device participates in a dependency chain).
Since device_set_pm_not_required() must be called before device_add()
or it would not have any effect, it can update power.no_callbacks
without locking, unlike pm_runtime_no_callbacks() that can be called
after registering the target device.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/1950054.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82a051e2553b9e297cba82a975d9c538b882c79e upstream.
Flush stale data from the RX FIFO in case of errors, to avoid reading
old data when new packets arrive.
Commit c6e8d85faf ("staging: axis-fifo: Remove hardware resets for
user errors") removed full FIFO resets from the read error paths, which
fixed potential TX data losses, but introduced this RX issue.
Fixes: c6e8d85faf ("staging: axis-fifo: Remove hardware resets for user errors")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250912101322.1282507-2-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d07bee10e4bdd043ec7152cbbb9deb27033c9e2 upstream.
If copy_from_user() fails, write() currently returns -EFAULT, but any
partially written data leaves the TX FIFO in an inconsistent state.
Subsequent write() calls then fail with "transmit length mismatch"
errors.
Once partial data is written to the hardware FIFO, it cannot be removed
without a TX reset. Commit c6e8d85faf ("staging: axis-fifo: Remove
hardware resets for user errors") removed a full FIFO reset for this case,
which fixed a potential RX data loss, but introduced this TX issue.
Fix this by introducing a bounce buffer: copy the full packet from
userspace first, and write to the hardware FIFO only if the copy
was successful.
Fixes: c6e8d85faf ("staging: axis-fifo: Remove hardware resets for user errors")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250912101322.1282507-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52ff2b840bc723f3be1f096f8017c78e0515858c upstream.
Since commit 2ca34b5087 ("staging: axis-fifo: Correct handling of
tx_fifo_depth for size validation"), write() operations with packets
larger than 'tx_fifo_depth - 4' words are no longer rejected with -EINVAL.
Fortunately, the packets are not actually getting transmitted to hardware,
otherwise they would be raising a 'Transmit Packet Overrun Error'
interrupt, which requires a reset of the TX circuit to recover from.
Instead, the request times out inside wait_event_interruptible_timeout()
and always returns -EAGAIN, since the wake up condition can never be true
for these packets. But still, they unnecessarily block other tasks from
writing to the FIFO and the EAGAIN return code signals userspace to retry
the write() call, even though it will always fail and time out.
According to the AXI4-Stream FIFO reference manual (PG080), the maximum
valid packet length is 'tx_fifo_depth - 4' words, so attempting to send
larger packets is invalid and should not be happening in the first place:
> The maximum packet that can be transmitted is limited by the size of
> the FIFO, which is (C_TX_FIFO_DEPTH–4)*(data interface width/8) bytes.
Therefore, bring back the old behavior and outright reject packets larger
than 'tx_fifo_depth - 4' with -EINVAL. Add a comment to explain why the
check is necessary. The dev_err() message was removed to avoid cluttering
the dmesg log if an invalid packet is received from userspace.
Fixes: 2ca34b5087 ("staging: axis-fifo: Correct handling of tx_fifo_depth for size validation")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250817171350.872105-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc4d900d0d6d8dd5c41832a93ff3cfa629a78f9a upstream.
Console can be enabled on the UART compile as module.
Change dependency to allow console mode when the driver is built as module.
Fixes: 48a6092fb4 ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20250822141923.61133-1-raphael.gallais-pou@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b56cc41a3ae7323aa3c6165f93c32e020538b6d2 upstream.
As reported by syzbot, mcp2221_raw_event lacked
validation of incoming I2C read data sizes, risking buffer
overflows in mcp->rxbuf during multi-part transfers.
As highlighted in the DS20005565B spec, p44, we have:
"The number of read-back data bytes to follow in this packet:
from 0 to a maximum of 60 bytes of read-back bytes."
This patch enforces we don't exceed this limit.
Reported-by: syzbot+52c1a7d3e5b361ccd346@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=52c1a7d3e5b361ccd346
Tested-by: syzbot+52c1a7d3e5b361ccd346@syzkaller.appspotmail.com
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Link: https://patch.msgid.link/20250726220931.7126-1-contact@arnaud-lcm.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5cff263606a10102a0ea19ff579eaa18fd5577ad ]
Driver configures register to choose controller mode before
setting all channels to reset mode leading to failure.
The patch corrects operation of mode setting.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Tranh Ha <tranh.ha.xb@renesas.com>
Link: https://patch.msgid.link/TYWPR01MB87434739F83E27EDCD23DF44B416A@TYWPR01MB8743.jpnprd01.prod.outlook.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b696808472197b77b888f50bc789a3bae077743 ]
This issue is similar to the vulnerability in the `mcp251x` driver,
which was fixed in commit 03c427147b ("can: mcp251x: fix resume from
sleep before interface was brought up").
In the `hi311x` driver, when the device resumes from sleep, the driver
schedules `priv->restart_work`. However, if the network interface was
not previously enabled, the `priv->wq` (workqueue) is not allocated and
initialized, leading to a null pointer dereference.
To fix this, we move the allocation and initialization of the workqueue
from the `hi3110_open` function to the `hi3110_can_probe` function.
This ensures that the workqueue is properly initialized before it is
used during device resume. And added logic to destroy the workqueue
in the error handling paths of `hi3110_can_probe` and in the
`hi3110_can_remove` function to prevent resource leaks.
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://patch.msgid.link/20250911150820.250-1-chenyufeng@iie.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed4e6b5d644c4dd2bc2872ffec036b7da0ec2e27 ]
Syzbot hits a problem with enabled ref-verify, ignorebadroots and a
fuzzed/damaged extent tree. There's no fallback option like in other
places that can deal with it so disable the whole ref-verify as it is
just a debugging feature.
Reported-by: syzbot+9c3e0cdfbfe351b0bc0e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/0000000000001b6052062139be1c@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dd28fd86c3fa4e395031dd6f2ba920242107010 ]
Adjust register settings for SAR adc button detection mode
to fix noise issue in headset.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/766cd1d2dd7a403ba65bb4cc44845f71@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5edf3550f4260504b7e0ab3d40d13ffe924b773 ]
When cross-compiling the perf tool for ARM64, `perf help` may crash
with the following assertion failure:
help.c:122: exclude_cmds: Assertion `cmds->names[ci] == NULL' failed.
This happens when the perf binary is not named exactly "perf" or when
multiple "perf-*" binaries exist in the same directory. In such cases,
the `excludes` command list can be empty, which leads to the final
assertion in exclude_cmds() being triggered.
Add a simple guard at the beginning of exclude_cmds() to return early
if excludes->cnt is zero, preventing the crash.
Signed-off-by: hupu <hupu.gm@gmail.com>
Reported-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250909094953.106706-1-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77b8e6fbf9848d651f5cb7508f18ad0971f3ffdb ]
MAX_TAG_SIZE was 0x1a8 and it may be truncated in the "bi->metadata_size
= ic->tag_size" assignment. We need to limit it to 255.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b97aaf74e ]
The bodies of __signed_type_use() and __unsigned_type_use() are much the
same size as their names - so put the bodies in the only line that expands
them.
Similarly __signed_type() is defined separately for 64bit and then used
exactly once just below.
Change the test for __signed_type from CONFIG_64BIT to one based on gcc
defined macros so that the code is valid if it gets used outside of a
kernel build.
Link: https://lkml.kernel.org/r/9386d1ebb8974fbabbed2635160c3975@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 495bba17cd ]
Always pass a 'type' through to __clamp_once(), pass '__auto_type' from
clamp() itself.
The expansion of __types_ok3() is reasonable so it isn't worth the added
complexity of avoiding it when a fixed type is used for all three values.
Link: https://lkml.kernel.org/r/8f69f4deac014f558bab186444bac2e8@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c3939872ee ]
At some point the definitions for clamp() got added in the middle of the
ones for min() and max(). Re-order the definitions so they are more
sensibly grouped.
Link: https://lkml.kernel.org/r/8bb285818e4846469121c8abc3dfb6e2@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5743f32ba ]
Use BUILD_BUG_ON_MSG(statically_true(ulo > uhi), ...) for the sanity check
of the bounds in clamp(). Gives better error coverage and one less
expansion of the arguments.
Link: https://lkml.kernel.org/r/34d53778977747f19cce2abb287bb3e6@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b280bb27a9 ]
Since the test for signed values being non-negative only relies on
__builtion_constant_p() (not is_constexpr()) it can use the 'ux' variable
instead of the caller supplied expression. This means that the #define
parameters are only expanded twice. Once in the code and once quoted in
the error message.
Link: https://lkml.kernel.org/r/051afc171806425da991908ed8688a98@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 10666e9920 ]
- Change three to several.
- Remove the comment about retaining constant expressions, no longer true.
- Realign to nearer 80 columns and break on major punctiation.
- Add a leading comment to the block before __signed_type() and __is_nonneg()
Otherwise the block explaining the cast is a bit 'floating'.
Reword the rest of that comment to improve readability.
Link: https://lkml.kernel.org/r/85b050c81c1d4076aeb91a6cded45fee@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71ee9b1625 ]
Patch series "minmax.h: Cleanups and minor optimisations".
Some tidyups and minor changes to minmax.h.
This patch (of 7):
Link: https://lkml.kernel.org/r/c50365d214e04f9ba256d417c8bebbc0@AcuMS.aculab.com
Link: https://lkml.kernel.org/r/f04b2e1310244f62826267346fde0553@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21b136cc63 ]
David Laight pointed out that we should deal with the min3() and max3()
mess too, which still does excessive expansion.
And our current macros are actually rather broken.
In particular, the macros did this:
#define min3(x, y, z) min((typeof(x))min(x, y), z)
#define max3(x, y, z) max((typeof(x))max(x, y), z)
and that not only is a nested expansion of possibly very complex
arguments with all that involves, the typing with that "typeof()" cast
is completely wrong.
For example, imagine what happens in max3() if 'x' happens to be a
'unsigned char', but 'y' and 'z' are 'unsigned long'. The types are
compatible, and there's no warning - but the result is just random
garbage.
No, I don't think we've ever hit that issue in practice, but since we
now have sane infrastructure for doing this right, let's just use it.
It fixes any excessive expansion, and also avoids these kinds of broken
type issues.
Requested-by: David Laight <David.Laight@aculab.com>
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 22f5468731 ]
This clarifies the rules for min()/max()/clamp() type checking and makes
them a much more efficient macro expansion.
In particular, we now look at the type and range of the inputs to see
whether they work together, generating a mask of acceptable comparisons,
and then just verifying that the inputs have a shared case:
- an expression with a signed type can be used for
(1) signed comparisons
(2) unsigned comparisons if it is statically known to have a
non-negative value
- an expression with an unsigned type can be used for
(3) unsigned comparison
(4) signed comparisons if the type is smaller than 'int' and thus
the C integer promotion rules will make it signed anyway
Here rule (1) and (3) are obvious, and rule (2) is important in order to
allow obvious trivial constants to be used together with unsigned
values.
Rule (4) is not necessarily a good idea, but matches what we used to do,
and we have extant cases of this situation in the kernel. Notably with
bcachefs having an expression like
min(bch2_bucket_sectors_dirty(a), ca->mi.bucket_size)
where bch2_bucket_sectors_dirty() returns an 's64', and
'ca->mi.bucket_size' is of type 'u16'.
Technically that bcachefs comparison is clearly sensible on a C type
level, because the 'u16' will go through the normal C integer promotion,
and become 'int', and then we're comparing two signed values and
everything looks sane.
However, it's not entirely clear that a 'min(s64,u16)' operation makes a
lot of conceptual sense, and it's possible that we will remove rule (4).
After all, the _reason_ we have these complicated type checks is exactly
that the C type promotion rules are not very intuitive.
But at least for now the rule is in place for backwards compatibility.
Also note that rule (2) existed before, but is hugely relaxed by this
commit. It used to be true only for the simplest compile-time
non-negative integer constants. The new macro model will allow cases
where the compiler can trivially see that an expression is non-negative
even if it isn't necessarily a constant.
For example, the amdgpu driver does
min_t(size_t, sizeof(fru_info->serial), pia[addr] & 0x3F));
because our old 'min()' macro would see that 'pia[addr] & 0x3F' is of
type 'int' and clearly not a C constant expression, so doing a 'min()'
with a 'size_t' is a signedness violation.
Our new 'min()' macro still sees that 'pia[addr] & 0x3F' is of type
'int', but is smart enough to also see that it is clearly non-negative,
and thus would allow that case without any complaints.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc1c8034e3 ]
Now that we no longer have any C constant expression contexts (ie array
size declarations or static initializers) that use min() or max(), we
can simpify the implementation by not having to worry about the result
staying as a C constant expression.
So now we can unconditionally just use temporary variables of the right
type, and get rid of the excessive expansion that used to come from the
use of
__builtin_choose_expr(__is_constexpr(...), ..
to pick the specialized code for constant expressions.
Another expansion simplification is to pass the temporary variables (in
addition to the original expression) to our __types_ok() macro. That
may superficially look like it complicates the macro, but when we only
want the type of the expression, expanding the temporary variable names
is much simpler and smaller than expanding the potentially complicated
original expression.
As a result, on my machine, doing a
$ time make drivers/staging/media/atomisp/pci/isp/kernels/ynr/ynr_1.0/ia_css_ynr.host.i
goes from
real 0m16.621s
user 0m15.360s
sys 0m1.221s
to
real 0m2.532s
user 0m2.091s
sys 0m0.452s
because the token expansion goes down dramatically.
In particular, the longest line expansion (which was line 71 of that
'ia_css_ynr.host.c' file) shrinks from 23,338kB (yes, 23MB for one
single line) to "just" 1,444kB (now "only" 1.4MB).
And yes, that line is still the line from hell, because it's doing
multiple levels of "min()/max()" expansion thanks to some of them being
hidden inside the uDIGIT_FITTING() macro.
Lorenzo has a nice cleanup patch that makes that driver use inline
functions instead of macros for sDIGIT_FITTING() and uDIGIT_FITTING(),
which will fix that line once and for all, but the 16-fold reduction in
this case does show why we need to simplify these helpers.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cb04e8b1d2 ]
We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.
This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 79d10f4f21a92e459b2276a77be62c59c1502c9d ]
The state->timer is a cyclic timer that schedules work_i2c_poll and
delayed_work_enable_hotplug, while rearming itself. Using timer_delete()
fails to guarantee the timer isn't still running when destroyed, similarly
cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has
terminated if already executing. During probe failure after timer
initialization, these may continue running as orphans and reference the
already-freed tc358743_state object through tc358743_irq_poll_timer.
The following is the trace captured by KASAN.
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __pfx_sched_balance_find_src_group+0x10/0x10
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? tmigr_update_events+0x280/0x740
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x98/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_node_track_caller_noprof+0x198/0x430
devm_kmalloc+0x7b/0x1e0
tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
release_nodes+0xa4/0x100
devres_release_group+0x1b2/0x380
i2c_device_probe+0x694/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace timer_delete() with timer_delete_sync() and cancel_delayed_work()
with cancel_delayed_work_sync() to ensure proper termination of timer and
work items before resource cleanup.
This bug was initially identified through static analysis. For reproduction
and testing, I created a functional emulation of the tc358743 device via a
kernel module and introduced faults through the debugfs interface.
Fixes: 869f38ae07 ("media: i2c: tc358743: Fix crash in the probe error path when using polling")
Fixes: d32d98642d ("[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ replaced del_timer() instead of timer_delete() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 40b7a19f321e65789612ebaca966472055dab48c ]
The original code uses cancel_delayed_work() in xc5000_release(), which
does not guarantee that the delayed work item timer_sleep has fully
completed if it was already running. This leads to use-after-free scenarios
where xc5000_release() may free the xc5000_priv while timer_sleep is still
active and attempts to dereference the xc5000_priv.
A typical race condition is illustrated below:
CPU 0 (release thread) | CPU 1 (delayed work callback)
xc5000_release() | xc5000_do_timer_sleep()
cancel_delayed_work() |
hybrid_tuner_release_state(priv) |
kfree(priv) |
| priv = container_of() // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the timer_sleep is properly canceled before the xc5000_priv memory
is deallocated.
A deadlock concern was considered: xc5000_release() is called in a process
context and is not holding any locks that the timer_sleep work item might
also need. Therefore, the use of the _sync() variant is safe here.
This bug was initially identified through static analysis.
Fixes: f7a27ff1fb ("[media] xc5000: delay tuner sleep to 5 seconds")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typo in Subject: tunner -> tuner]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8e1f5da59d ]
Make sure the firmware is released when we leave
xc_load_fw_and_init_tuner()
This change makes smatch happy:
drivers/media/tuners/xc5000.c:1213 xc_load_fw_and_init_tuner() warn: 'fw' from request_firmware() not released on lines: 1213.
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: 40b7a19f321e ("media: tuner: xc5000: Fix use-after-free in xc5000_release")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable commit 8f4dc4e54e ("KVM: arm64: Fix kernel BUG() due to bad
backport of FPSIMD/SVE/SME fix") fixed a kernel BUG() caused by a bad
backport of upstream commit fbc7e61195 ("KVM: arm64: Unconditionally
save+flush host FPSIMD/SVE/SME state") by ensuring that softirqs are
disabled/enabled across the fpsimd register save operation.
Unfortunately, although this fixes the original issue, it can now lead
to deadlock when re-enabling softirqs causes pending softirqs to be
handled with locks already held:
| BUG: spinlock recursion on CPU#7, CPU 3/KVM/57616
| lock: 0xffff3045ef850240, .magic: dead4ead, .owner: CPU 3/KVM/57616, .owner_cpu: 7
| CPU: 7 PID: 57616 Comm: CPU 3/KVM Tainted: G O 6.1.152 #1
| Hardware name: SoftIron SoftIron Platform Mainboard/SoftIron Platform Mainboard, BIOS 1.31 May 11 2023
| Call trace:
| dump_backtrace+0xe4/0x110
| show_stack+0x20/0x30
| dump_stack_lvl+0x6c/0x88
| dump_stack+0x18/0x34
| spin_dump+0x98/0xac
| do_raw_spin_lock+0x70/0x128
| _raw_spin_lock+0x18/0x28
| raw_spin_rq_lock_nested+0x18/0x28
| update_blocked_averages+0x70/0x550
| run_rebalance_domains+0x50/0x70
| handle_softirqs+0x198/0x328
| __do_softirq+0x1c/0x28
| ____do_softirq+0x18/0x28
| call_on_irq_stack+0x30/0x48
| do_softirq_own_stack+0x24/0x30
| do_softirq+0x74/0x90
| __local_bh_enable_ip+0x64/0x80
| fpsimd_save_and_flush_cpu_state+0x5c/0x68
| kvm_arch_vcpu_put_fp+0x4c/0x88
| kvm_arch_vcpu_put+0x28/0x88
| kvm_sched_out+0x38/0x58
| __schedule+0x55c/0x6c8
| schedule+0x60/0xa8
Take a tiny step towards the upstream fix in 9b19700e62 ("arm64:
fpsimd: Drop unneeded 'busy' flag") by additionally disabling hardirqs
while saving the fpsimd registers.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: 8f4dc4e54e ("KVM: arm64: Fix kernel BUG() due to bad backport of FPSIMD/SVE/SME fix")
Reported-by: Kenneth Van Alstyne <kvanals@kvanals.org>
Link: https://lore.kernel.org/r/010001999bae0958-4d80d25d-8dda-4006-a6b9-798f3e774f6c-000000@email.amazonses.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8318e04ab2526b155773313b66a1542476ce1106 upstream.
It is possible that the topology parsing function
audioreach_widget_load_module_common() could return NULL or an error
pointer. Add missing NULL check so that we do not dereference it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Stable@vger.kernel.org
Fixes: 36ad9bf1d9 ("ASoC: qdsp6: audioreach: add topology support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250825101247.152619-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa0f61cc1d828178aa921475a9b786e7fbb65ccb upstream.
Syzbot reports a KASAN issue as below:
BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline]
BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465
CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__create_pipe include/linux/usb.h:1945 [inline]
send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991
vfs_write+0x2d7/0xdd0 fs/read_write.c:576
ksys_write+0x127/0x250 fs/read_write.c:631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The iMON driver improperly releases the usb_device reference in
imon_disconnect without coordinating with active users of the
device.
Specifically, the fields usbdev_intf0 and usbdev_intf1 are not
protected by the users counter (ictx->users). During probe,
imon_init_intf0 or imon_init_intf1 increments the usb_device
reference count depending on the interface. However, during
disconnect, usb_put_dev is called unconditionally, regardless of
actual usage.
As a result, if vfd_write or other operations are still in
progress after disconnect, this can lead to a use-after-free of
the usb_device pointer.
Thread 1 vfd_write Thread 2 imon_disconnect
...
if
usb_put_dev(ictx->usbdev_intf0)
else
usb_put_dev(ictx->usbdev_intf1)
...
while
send_packet
if
pipe = usb_sndintpipe(
ictx->usbdev_intf0) UAF
else
pipe = usb_sndctrlpipe(
ictx->usbdev_intf0, 0) UAF
Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by
checking ictx->disconnected in all writer paths. Add early return
with -ENODEV in send_packet(), vfd_write(), lcd_write() and
display_open() if the device is no longer present.
Set and read ictx->disconnected under ictx->lock to ensure memory
synchronization. Acquire the lock in imon_disconnect() before setting
the flag to synchronize with any ongoing operations.
Ensure writers exit early and safely after disconnect before the USB
core proceeds with cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+f1a69784f6efe748c3bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f1a69784f6efe748c3bf
Fixes: 21677cfc56 ("V4L/DVB: ir-core: add imon driver")
Cc: stable@vger.kernel.org
Signed-off-by: Larshin Sergey <Sergey.Larshin@kaspersky.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01e03fb7db419d39e18d6090d4873c1bff103914 upstream.
The original code uses cancel_delayed_work() in flexcop_pci_remove(), which
does not guarantee that the delayed work item irq_check_work has fully
completed if it was already running. This leads to use-after-free scenarios
where flexcop_pci_remove() may free the flexcop_device while irq_check_work
is still active and attempts to dereference the device.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
flexcop_pci_remove() | flexcop_pci_irq_check_work()
cancel_delayed_work() |
flexcop_device_kfree(fc_pci->fc_dev) |
| fc = fc_pci->fc_dev; // UAF
This is confirmed by a KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff8880093aa8c8 by task bash/135
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_noprof+0x1be/0x460
flexcop_device_kmalloc+0x54/0xe0
flexcop_pci_probe+0x1f/0x9d0
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 135:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
flexcop_device_kfree+0x32/0x50
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing delayed
work has finished before the device memory is deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced
artificial delays within the flexcop_pci_irq_check_work() function to
increase the likelihood of triggering the bug.
Fixes: 382c5546d6 ("V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27e06650a5eafe832a90fd2604f0c5e920857fae upstream.
A buffer overflow arises from the usage of snprintf to write into the
buffer "buf" in target_lu_gp_members_show function located in
/drivers/target/target_core_configfs.c. This buffer is allocated with
size LU_GROUP_NAME_BUF (256 bytes).
snprintf(...) formats multiple strings into buf with the HBA name
(hba->hba_group.cg_item), a slash character, a devicename (dev->
dev_group.cg_item) and a newline character, the total formatted string
length may exceed the buffer size of 256 bytes.
Since snprintf() returns the total number of bytes that would have been
written (the length of %s/%sn ), this value may exceed the buffer length
(256 bytes) passed to memcpy(), this will ultimately cause function
memcpy reporting a buffer overflow error.
An additional check of the return value of snprintf() can avoid this
buffer overflow.
Reported-by: Wang Haoran <haoranwangsec@gmail.com>
Reported-by: ziiiro <yuanmingbuaa@gmail.com>
Signed-off-by: Wang Haoran <haoranwangsec@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since v6.1.154, mptcp selftests have failed to build with the following
errors:
mptcp_connect.c: In function ‘main_loop_s’:
mptcp_connect.c:1040:59: error: ‘winfo’ undeclared (first use in this function)
1040 | err = copyfd_io(fd, remotesock, 1, true, &winfo);
| ^~~~~
mptcp_connect.c:1040:59: note: each undeclared identifier is reported only once for each function it appears in
mptcp_connect.c:1040:23: error: too many arguments to function ‘copyfd_io’; expected 4, have 5
1040 | err = copyfd_io(fd, remotesock, 1, true, &winfo);
| ^~~~~~~~~ ~~~~~~
mptcp_connect.c:845:12: note: declared here
845 | static int copyfd_io(int infd, int peerfd, int outfd, bool close_peerfd)
| ^~~~~~~~~
This is caused by commit ff160500c4 ("selftests: mptcp: connect: catch
IO errors on listen side"), a backport of upstream 14e22b43df25,
which attempts to use the undeclared variable 'winfo' and passes too many
arguments to copyfd_io(). Both the winfo variable and the updated
copyfd_io() function were introduced in upstream
commit ca7ae89160 ("selftests: mptcp: mptfo Initiator/Listener"),
which is not present in v6.1.y.
The goal of the backport is to stop on errors from copyfd_io.
Therefore, the backport does not depend on the changes in upstream
commit ca7ae89160 ("selftests: mptcp: mptfo Initiator/Listener").
This commit simply removes ', &winfo' to fix a build failure.
Fixes: ff160500c4 ("selftests: mptcp: connect: catch IO errors on listen side")
Signed-off-by: Kenta Akagi <k@mgml.me>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loading a large (~2.1G) files with kexec crashes the host with when
running:
# kexec --load kernel --initrd initrd_with_2G_or_more
UBSAN: signed-integer-overflow in ./include/crypto/sha256_base.h:64:19
34152083 * 64 cannot be represented in type 'int'
...
BUG: unable to handle page fault for address: ff9fffff83b624c0
sha256_update (lib/crypto/sha256.c:137)
crypto_sha256_update (crypto/sha256_generic.c:40)
kexec_calculate_store_digests (kernel/kexec_file.c:769)
__se_sys_kexec_file_load (kernel/kexec_file.c:397 kernel/kexec_file.c:332)
...
(Line numbers based on commit da274362a7 ("Linux 6.12.49")
This started happening after commit f4da7afe07
("kexec_file: increase maximum file size to 4G") that landed in v6.0,
which increased the file size for kexec.
This is not happening upstream (v6.16+), given that `block` type was
upgraded from "int" to "size_t" in commit 74a43a2cf5 ("crypto:
lib/sha256 - Move partial block handling out")
Upgrade the block type similar to the commit above, avoiding hitting the
overflow.
This patch is only suitable for the stable tree, and before 6.16, which
got commit 74a43a2cf5 ("crypto: lib/sha256 - Move partial block
handling out"). This is not required before f4da7afe07 ("kexec_file:
increase maximum file size to 4G"). In other words, this fix is required
between versions v6.0 and v6.16.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: f4da7afe07 ("kexec_file: increase maximum file size to 4G") # Before v6.16
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f71507415 upstream.
The scale() functions detects invalid parameters, but continues
its calculations anyway. This causes bad results if negative values
are used for unsigned operations. Worst case, a division by 0 error
will be seen if source_min == source_max.
On top of that, after v6.13, the sequence of WARN_ON() followed by clamp()
may result in a build error with gcc 13.x.
drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale':
include/linux/compiler_types.h:542:45: error:
call to '__compiletime_assert_415' declared with attribute error:
clamp() low limit source_min greater than high limit source_max
This happens if the compiler decides to rearrange the code as follows.
if (source_min > source_max) {
WARN(..);
/* Do the clamp() knowing that source_min > source_max */
source_val = clamp(source_val, source_min, source_max);
} else {
/* Do the clamp knowing that source_min <= source_max */
source_val = clamp(source_val, source_min, source_max);
}
Fix the problem by evaluating the return values from WARN_ON and returning
immediately after a warning. While at it, fix divide by zero error seen
if source_min == source_max.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 017fa3e891 upstream.
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4477b39c32 upstream.
Commit 3a7e02c040 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a251f52cf ]
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 85e1ff61060a765d91ee62dc5606d4d547d9d105 ]
Running sha224_kunit on a KMSAN-enabled kernel results in a crash in
kmsan_internal_set_shadow_origin():
BUG: unable to handle page fault for address: ffffbc3840291000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1810067 P4D 1810067 PUD 192d067 PMD 3c17067 PTE 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 81 Comm: kunit_try_catch Tainted: G N 6.17.0-rc3 #10 PREEMPT(voluntary)
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmsan_internal_set_shadow_origin+0x91/0x100
[...]
Call Trace:
<TASK>
__msan_memset+0xee/0x1a0
sha224_final+0x9e/0x350
test_hash_buffer_overruns+0x46f/0x5f0
? kmsan_get_shadow_origin_ptr+0x46/0xa0
? __pfx_test_hash_buffer_overruns+0x10/0x10
kunit_try_run_case+0x198/0xa00
This occurs when memset() is called on a buffer that is not 4-byte aligned
and extends to the end of a guard page, i.e. the next page is unmapped.
The bug is that the loop at the end of kmsan_internal_set_shadow_origin()
accesses the wrong shadow memory bytes when the address is not 4-byte
aligned. Since each 4 bytes are associated with an origin, it rounds the
address and size so that it can access all the origins that contain the
buffer. However, when it checks the corresponding shadow bytes for a
particular origin, it incorrectly uses the original unrounded shadow
address. This results in reads from shadow memory beyond the end of the
buffer's shadow memory, which crashes when that memory is not mapped.
To fix this, correctly align the shadow address before accessing the 4
shadow bytes corresponding to each origin.
Link: https://lkml.kernel.org/r/20250911195858.394235-1-ebiggers@kernel.org
Fixes: 2ef3cec44c ("kmsan: do not wipe out origin when doing partial unpoisoning")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Adjust context in tests ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55d225670def06b01af2e7a5e0446fbe946289e8 ]
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aa6908ca3b ]
In Tables 8-12 and 8-22 in the X710/XXV710/XL710 datasheet, the QLEN
description states that the maximum size of the descriptor queue is 8k
minus 32, or 8160.
Signed-off-by: Justin Bronder <jsbronder@cold-front.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 55d225670def ("i40e: add validation for ring_len param")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 877b7e6ffc23766448236e8732254534c518ba42 ]
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset.
Fixes: 61125b8be8 ("i40e: Fix failed opcode appearing if handling messages from VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7c31f8dc54aa3c9b2c994b5f1ff7e740a654e97 ]
The busy-waiting in `mdelay()` can cause CPU stalls and kernel timeouts
during boot.
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Carol L Soto csoto@nvidia.com<mailto:csoto@nvidia.com>
Fixes: 594e9c04b5 ("drm/ast: Create the driver for ASPEED proprietory Display-Port")
Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.19+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250917194346.2905522-1-nirmoyd@nvidia.com
[ Applied change to ast_astdp_read_edid() instead of ast_astdp_read_edid_block() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a7e02c040 ]
The minmax infrastructure is overkill for simple constants, and can
cause huge expansions because those simple constants are then used by
other things.
For example, 'pageblock_order' is a core VM constant, but because it was
implemented using 'min_t()' and all the type-checking that involves, it
actually expanded to something like 2.5kB of preprocessor noise.
And when that simple constant was then used inside other expansions:
#define pageblock_nr_pages (1UL << pageblock_order)
#define pageblock_start_pfn(pfn) ALIGN_DOWN((pfn), pageblock_nr_pages)
and we then use that inside a 'max()' macro:
case ISOLATE_SUCCESS:
update_cached = false;
last_migrated_pfn = max(cc->zone->zone_start_pfn,
pageblock_start_pfn(cc->migrate_pfn - 1));
the end result was that one statement expanding to 253kB in size.
There are probably other cases of this, but this one case certainly
stood out.
I've added 'MIN_T()' and 'MAX_T()' macros for this kind of "core simple
constant with specific type" use. These macros skip the type checking,
and as such need to be very sparingly used only for obvious cases that
have active issues like this.
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/36aa2cad-1db1-4abf-8dd2-fb20484aabc3@lucifer.local/
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
