commit 8f38219fa1 upstream.
gpio_keys_irq_isr() and gpio_keys_irq_timer() access the same resources.
There could be a concurrent access if a GPIO interrupt occurs in parallel
of a HR timer interrupt.
Guard back those resources with a spinlock.
Fixes: 019002f20c ("Input: gpio-keys - use hrtimer for release timer")
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-2-3fc55a9c3619@foss.st.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a95ef0199e upstream.
The "len" variable comes from the firmware and we generally do
trust firmware, but it's always better to double check. If the "len"
is too large it could result in memory corruption when we do
"memcpy(fragment->data, rec->data, len);"
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/131fd1ae92c828ee9f4fa2de03d8c210ae1f3524.1748463049.git.dan.carpenter@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ca39500f6a ]
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bd ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2abc698ac7 upstream.
Enable InterTouch mode on TUXEDO InfinityBook Pro 14 v5 by adding
"SYN1221" to the list of SMBus-enabled variants.
Add support for InterTouch on SYN1221 by adding it to the list of
SMBus-enabled variants.
Reported-by: Matthias Eilert <kernel.hias@eilert.tech>
Tested-by: Matthias Eilert <kernel.hias@eilert.tech>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597C033C4BC20EE2A0C4543B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d7ea08810 upstream.
[ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004
The board is labelled TM3322.
Present on the Toshiba / Dynabook Portege X30-D and possibly others.
Confirmed working well with psmouse.synaptics_intertouch=1 and local build.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11cdb506d0 upstream.
In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.
Fixes: b581acb49a ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d85862ccca upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75ee4ebebb upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
While the old quirk combination did not show negative effects on these
devices specifically, the new quirk works just as well and seems more
stable in general.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ed468e17d upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF,
P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume.
This quirk fixes that.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 729d163232 upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
With the old i8042 quirks this devices keyboard is sometimes laggy after
resume. With the new quirk this issue doesn't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 222f3390c1 upstream.
Add Wooting Two HE (ARM) to the list of supported devices.
Signed-off-by: Jack Greiner <jack@emoss.org>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-3-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4940fe632 upstream.
Although it mimics the Microsoft's VendorID, it is in fact a clone.
Taking into account that the original Microsoft Receiver is not being
manufactured anymore, this drive can solve dpad issues encontered by
those who still use the original 360 Wireless controller
but are using a receiver clone.
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-12-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 907bc9268a upstream.
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbf8d71742 upstream.
Calling irq_domain_remove() will lead to freeing the IRQ domain
prematurely. The domain is still referenced and will be attempted to get
used via rmi_free_function_list() -> rmi_unregister_function() ->
irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer.
With PaX's MEMORY_SANITIZE this will lead to an access fault when
attempting to dereference embedded pointers, as in Torsten's report that
was faulting on the 'domain->ops->unmap' test.
Fix this by releasing the IRQ domain only after all related IRQs have
been deactivated.
Fixes: 24d28e4f12 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240222142654.856566-1-minipli@grsecurity.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c684771630 upstream.
The adp5589 seems to have the same behavior as similar devices as
explained in commit 910a9f5636 ("Input: adp5588-keys - get value from
data out when dir is out").
Basically, when the gpio is set as output we need to get the value from
ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A.
Fixes: 9d2e173644 ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb5cc65f97 upstream.
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early.
Fixes: 30df385e35 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01eed86d50 upstream.
There might be devices out in the wild where the board name is GMxXGxx
instead of GMxXGxX.
Adding both to be on the safe side.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3870e2850b upstream.
The Gen6 devices have the same problem and the same Solution as the Gen5
ones.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e06edf96de upstream.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240905164851.771578-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb017f4ea1 upstream.
During adp5588_setup(), we read all the events to clear the event FIFO.
However, adp5588_read() just calls i2c_smbus_read_byte_data() which
returns the byte read in case everything goes well. Hence, we need to
explicitly check for a negative error code instead of checking for
something different than 0.
Fixes: e960309ce3 ("Input: adp5588-keys - bail out on returned error")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 208989744a ]
Ensure that the touchscreen response has correct "report id" byte
before processing the touch data and discard other messages.
Fixes: 42370681bd ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-3-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d0b18cd5d ]
For different reasons i2c transaction may fail or report id in the
message may be wrong. Avoid closing the frame in this case as it will
result in all contacts being dropped, indicating that nothing is
touching the screen anymore, while usually it is not the case.
Fixes: 42370681bd ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-2-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da89748455 ]
The kernel reports that the touchpad for this device can support a
different bus.
With SMBus enabled the touchpad movement is smoother and three-finger
gestures are recognized.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240719180612.1.Ib652dd808c274076f32cd7fc6c1160d2cf71753b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccbfea78ad ]
In case the touch controller is not connected, this message keeps scrolling
on the console indefinitelly. Ratelimit it to avoid filling kernel logs.
"
ads7846 spi2.1: spi_sync --> -22
"
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240708211913.171243-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 206f533a0a ]
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When exercising uinput interface syzkaller may try setting up device
with a really large number of slots, which causes memory allocation
failure in input_mt_init_slots(). While this allocation failure is
handled properly and request is rejected, it results in syzkaller
reports. Additionally, such request may put undue burden on the
system which will try to free a lot of memory for a bogus request.
Fix it by limiting allowed number of slots to 100. This can easily
be extended if we see devices that can track more than 100 contacts.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17f5eebf67 ]
Allocating a contiguous buffer of 64K may fail if memory is sufficiently
fragmented, and may cause OOM kill of an unrelated process. However we
do not need to have contiguous memory. We also do not need to zero
out the buffer since it will be overwritten with firmware data.
Switch to using kvmalloc() instead of kzalloc().
Link: https://lore.kernel.org/r/20240609234757.610273-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 99d3bf5f73 upstream.
syzbot is reporting too large allocation at input_mt_init_slots(), for
num_slots is supplied from userspace using ioctl(UI_DEV_CREATE).
Since nobody knows possible max slots, this patch chose 1024.
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aaa4ca873d upstream.
The old quirk combination sometimes cause a laggy keyboard after boot. With
the new quirk the initial issue of an unresponsive keyboard after s3 resume
is also fixed, but it doesn't have the negative side effect of the
sometimes laggy keyboard.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d765ae2da upstream.
On s3 resume the i8042 driver tries to restore the controller to a known
state by reinitializing things, however this can confuse the controller
with different effects. Mostly occasionally unresponsive keyboards after
resume.
These issues do not rise on s0ix resume as here the controller is assumed
to preserved its state from before suspend.
This patch adds a quirk for devices where the reinitialization on s3 resume
is not needed and might be harmful as described above. It does this by
using the s0ix resume code path at selected locations.
This new quirk goes beyond what the preexisting reset=never quirk does,
which only skips some reinitialization steps.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f82c1e047 ]
Make sure interrupts are not left disabled when we fail to suspend the
touch controller.
Fixes: 6696777c65 ("Input: add driver for Elan I2C/SMbus touchpad")
Link: https://lore.kernel.org/r/ZmKiiL-1wzKrhqBj@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 866a5c7e27 ]
If the device is missing, we get the following error:
qt1050 3-0041: ID -1340767592 not supported
Let's handle this situation and print more informative error
when reading of CHIP_ID fails:
qt1050 3-0041: Failed to read chip ID: -6
Fixes: cbebf5adde ("Input: qt1050 - add Microchip AT42QT1050 support")
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20240617183018.916234-1-andrey.lalaev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a69ce592cb ]
The Lenovo N24 on resume becomes stuck in a state where it
sends incorrect packets, causing elantech_packet_check_v4 to fail.
The only way for the device to resume sending the correct packets is for
it to be disabled and then re-enabled.
This change adds a dmi check to trigger this behavior on resume.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240503155020.v2.1.Ifa0e25ebf968d8f307f58d678036944141ab17e6@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38a38f5a36 ]
When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.
There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.
Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a08b8f8557 ]
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "ff" variable is a pointer to "struct ff_device" and this
structure ends in a flexible array:
struct ff_device {
[...]
struct file *effect_owners[] __counted_by(max_effects);
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count * size" in
the kzalloc() function.
The struct_size() helper returns SIZE_MAX on overflow. So, refactor
the comparison to take advantage of this.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/AS8PR02MB72371E646714BAE2E51A6A378B152@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f0fad0382 ]
The caller of this function treats all non-zero values as an error, so
the return value of i2c_master_recv() cannot be returned directly.
This fixes touch reporting when there are more than 6 active touches.
Fixes: ef536abd3a ("Input: ili210x - define and use chip operations structure")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240523085624.2295988-1-jkeeping@inmusicbrands.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0774d19038 upstream.
If an input device declares too many capability bits then modalias
string for such device may become too long and not fit into uevent
buffer, resulting in failure of sending said uevent. This, in turn,
may prevent userspace from recognizing existence of such devices.
This is typically not a concern for real hardware devices as they have
limited number of keys, but happen with synthetic devices such as
ones created by xen-kbdfront driver, which creates devices as being
capable of delivering all possible keys, since it doesn't know what
keys the backend may produce.
To deal with such devices input core will attempt to trim key data,
in the hope that the rest of modalias string will fit in the given
buffer. When trimming key data it will indicate that it is not
complete by placing "+," sign, resulting in conversions like this:
old: k71,72,73,74,78,7A,7B,7C,7D,8E,9E,A4,AD,E0,E1,E4,F8,174,
new: k71,72,73,74,78,7A,7B,7C,+,
This should allow existing udev rules continue to work with existing
devices, and will also allow writing more complex rules that would
recognize trimmed modalias and check input device characteristics by
other means (for example by parsing KEY= data in uevent or parsing
input device sysfs attributes).
Note that the driver core may try adding more uevent environment
variables once input core is done adding its own, so when forming
modalias we can not use the entire available buffer, so we reduce
it by somewhat an arbitrary amount (96 bytes).
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Link: https://lore.kernel.org/r/ZjAWMQCJdrxZkvkB@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
[ Upstream commit 7b4e0b3918 ]
Grab input->mutex during suspend/resume functions like it is done in
other input drivers. This fixes the following warning during system
suspend/resume cycle on Samsung Exynos5250-based Snow Chromebook:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c
Modules linked in: ...
CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound async_run_entry_fn
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0x1a8/0x1cc
__warn from warn_slowpath_fmt+0x18c/0x1b4
warn_slowpath_fmt from input_device_enabled+0x68/0x6c
input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc
cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c
cyapa_reinitialize from cyapa_resume+0x48/0x98
cyapa_resume from dpm_run_callback+0x90/0x298
dpm_run_callback from device_resume+0xb4/0x258
device_resume from async_resume+0x20/0x64
async_resume from async_run_entry_fn+0x40/0x15c
async_run_entry_fn from process_scheduled_works+0xbc/0x6a8
process_scheduled_works from worker_thread+0x188/0x454
worker_thread from kthread+0x108/0x140
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf1625fb0 to 0xf1625ff8)
...
---[ end trace 0000000000000000 ]---
...
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c
Modules linked in: ...
CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound async_run_entry_fn
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0x1a8/0x1cc
__warn from warn_slowpath_fmt+0x18c/0x1b4
warn_slowpath_fmt from input_device_enabled+0x68/0x6c
input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc
cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c
cyapa_reinitialize from cyapa_resume+0x48/0x98
cyapa_resume from dpm_run_callback+0x90/0x298
dpm_run_callback from device_resume+0xb4/0x258
device_resume from async_resume+0x20/0x64
async_resume from async_run_entry_fn+0x40/0x15c
async_run_entry_fn from process_scheduled_works+0xbc/0x6a8
process_scheduled_works from worker_thread+0x188/0x454
worker_thread from kthread+0x108/0x140
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf1625fb0 to 0xf1625ff8)
...
---[ end trace 0000000000000000 ]---
Fixes: d69f0a43c6 ("Input: use input_device_enabled()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://lore.kernel.org/r/20231009121018.1075318-1-m.szyprowski@samsung.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48c0687a32 ]
The output voltage is inclusive hence the max level calculation is
off-by-one-step. Correct it.
iWhile we are at it also add a define for the step size instead of
using the magic value.
Fixes: 11205bb63e ("Input: add support for pm8xxx based vibrator driver")
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240412-pm8xxx-vibrator-new-design-v10-1-0ec0ad133866@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d40e9edcf3 ]
Without the device table the driver will not auto-load when compiled as
a module.
Fixes: 273db8f035 ("Input: add IOC3 serio driver")
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240313115832.8052-1-balejk@matfyz.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 150e792dee ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230920125829.1478827-37-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: d40e9edcf3 ("Input: ioc3kbd - add device table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf32bceedd ]
clang warns about a string overflow in this driver
drivers/input/misc/ims-pcu.c:1802:2: error: 'snprintf' will always be truncated; specified size is 10, but format string expands to at least 12 [-Werror,-Wformat-truncation]
drivers/input/misc/ims-pcu.c:1814:2: error: 'snprintf' will always be truncated; specified size is 10, but format string expands to at least 12 [-Werror,-Wformat-truncation]
Make the buffer a little longer to ensure it always fits.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240326223825.4084412-7-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0ca3dbd03 ]
Instead of manually extracting certain bits from registers with binary
ANDs and shifts, the FIELD_GET macro can be used. With this in mind, the
*_SHIFT macros can be dropped.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-1-2c429afa8420@skole.hr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a62ed17a ]
As specified in downstream IST3038B driver and proved by testing,
the correct maximum reported value of touch area is 16.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-2-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4996184d ]
While input core can work with input->phys set to NULL userspace might
depend on it, so better fail probing if allocation fails. The system must
be in a pretty bad shape for it to happen anyway.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240117073124.143636-1-chentao@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
