commit 650768c512 upstream.
Commit 9c006972c3 ("arm64: mmu: drop pXd_present() checks from
pXd_free_pYd_table()") removes the pxd_present() checks because the
caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the
caller only checks pud_present(); pud_free_pmd_page() recurses on each
pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is
possible to hit a warning in the latter, since pmd_none => !pmd_table().
Thus, add a pmd_present() check in pud_free_pmd_page().
This problem was found by code inspection.
Fixes: 9c006972c3 ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()")
Cc: stable@vger.kernel.org
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250527082633.61073-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bad8c923f upstream.
The VSELECT pin is configured as MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT
and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC
block handles the VSELECT pin on its own.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97b67cc102 upstream.
Add device tree nodes for two power regulators on the J721E SK board.
vsys_5v0: A fixed regulator representing the 5V supply output from the
LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator.
J721E-SK schematics: https://www.ti.com/lit/zip/sprr438
Fixes: 1bfda92a3a ("arm64: dts: ti: Add support for J721E SK")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250415111328.3847502-2-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f9bbc1140 upstream.
dm_op hypercalls might come from userspace and pass memory addresses as
parameters. The memory addresses typically correspond to buffers
allocated in userspace to hold extra hypercall parameters.
On ARM, when CONFIG_ARM64_SW_TTBR0_PAN is enabled, they might not be
accessible by Xen, as a result ioreq hypercalls might fail. See the
existing comment in arch/arm64/xen/hypercall.S regarding privcmd_call
for reference.
For privcmd_call, Linux calls uaccess_ttbr0_enable before issuing the
hypercall thanks to commit 9cf09d68b8. We need to do the same for
dm_op. This resolves the problem.
Cc: stable@kernel.org
Fixes: 9cf09d68b8 ("arm64: xen: Enable user access before a privcmd hvc call")
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <alpine.DEB.2.22.394.2505121446370.8380@ubuntu-linux-20-04-desktop>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b04f0d89e8 ]
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e71 ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit
0d45062cfc ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1
Fixes: 0d45062cfc ("arm64: dts: marvell: Add device tree for uDPU board")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe035d866 ]
Rename the node 'mt6359rtc' to 'rtc', as required by the binding.
Fix the following dtb-check error:
mediatek/mt8395-radxa-nio-12l.dtb: pmic: 'mt6359rtc' do not match
any of the regexes: 'pinctrl-[0-9]+'
Fixes: 3b7d143be4 ("arm64: dts: mt6359: add PMIC MT6359 related nodes")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250514-mt8395-dtb-errors-v2-3-d67b9077c59a@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit febd8c6ab5 ]
The u2phy0_host port is the part of the USB PHY0 (namely the
HOST0_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST0_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers.
USB3 OTG has been known to be unstable on RK3399 Puma Haikou for a
while, one of the recurring issues being that only USB2 is detected and
not USB3 in host mode. Reading the justification above and seeing that
we are keeping u2phy0_host in the Haikou carrierboard DTS probably may
have bothered you since it should be changed to u2phy0_otg. The issue is
that if it's switched to that, USB OTG on Haikou is entirely broken. I
have checked the routing in the Gerber file, the lanes are going to the
expected ball pins (that is, NOT HOST0_DP/DM).
u2phy0_host is for sure the wrong part of the PHY to use, but it's the
only one that works at the moment for that board so keep it until we
figure out what exactly is broken.
No intended functional change.
[1] https://rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf
Chapter 2 USB2.0 PHY
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-5-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f52cd248d8 ]
The mediatek display driver fails to probe on mt8173-elm-hana and
mt8183-kukui-jacuzzi-juniper-sku16 in v6.14-rc4 due to missing PHY
configurations.
Commit 924d66011f ("drm/mediatek: stop selecting foreign drivers")
stopped selecting the MediaTek PHY drivers, requiring them to be
explicitly enabled in defconfig.
Enable the following PHY drivers for MediaTek platforms:
CONFIG_PHY_MTK_HDMI=m for HDMI display
CONFIG_PHY_MTK_MIPI_DSI=m for DSI display
CONFIG_PHY_MTK_DP=m for DP display
Fixes: 924d66011f ("drm/mediatek: stop selecting foreign drivers")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Link: https://lore.kernel.org/r/20250512131933.1247830-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fe38d2a19 ]
The 'compatible' property is required by the
'mfd/mediatek,mt6397.yaml' binding. Add it to fix the following
dtb-check error:
mediatek/mt8395-radxa-nio-12l.dtb: pmic: regulators:
'compatible' is a required property
Fixes: 3b7d143be4 ("arm64: dts: mt6359: add PMIC MT6359 related nodes")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250505-mt8395-dtb-errors-v1-3-9c4714dcdcdb@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3f03bec30 ]
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 36ca3c8ccb ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e98d45666 ]
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 593816fa2f ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eca6af667 ]
During initial porting these cd-gpios were missed. Having card detect is
beneficial because driver does not need to do polling every second and it
can just use IRQ. SD card detection in U-Boot is also fixed by this.
Fixes: cf85e9aee2 ("arm64: dts: qcom: sdm660-xiaomi-lavender: Add eMMC and SD")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415130101.1429281-1-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 394f290333 ]
By hardware, the first and second core of the video decoder IP
need the VDEC_SOC to be powered up in order to be able to be
accessed (both internally, by firmware, and externally, by the
kernel).
Similarly, for the video encoder IP, the second core needs the
first core to be powered up in order to be accessible.
Fix that by reparenting the VDEC1/2 power domains to be children
of VDEC0 (VDEC_SOC), and the VENC1 to be a child of VENC0.
Fixes: 2b515194bf ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250402090615.25871-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28f997b899 ]
There is a typo in cpu7_opp9. Fix it to get rid of the following
errors.
[ 0.198043] cpu cpu7: Voltage update failed freq=1747200
[ 0.198052] cpu cpu7: failed to update OPP for freq=1747200
Fixes: 8e0e8016cb ("arm64: dts: qcom: sm8250: Add CPU opp tables")
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250308-fix-sm8250-cpufreq-v1-1-8a0226721399@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f101c56447 ]
When the 52-bit virtual addressing was introduced the select like
ARCH_MMAP_RND_BITS_MAX logic was never updated to account for it.
Because of that the rnd max bits knob is set to the default value of 18
when ARM64_VA_BITS=52.
Fix this by setting ARCH_MMAP_RND_BITS_MAX to the same value that would
be used if 48-bit addressing was used. Higher values can't used here
because 52-bit addressing is used only if the caller provides a hint to
mmap, with a fallback to 48-bit. The knob in question is an upper bound
for what the user can set in /proc/sys/vm/mmap_rnd_bits, which in turn
is used to determine how many random bits can be inserted into the base
address used for mmap allocations. Since 48-bit allocations are legal
with ARM64_VA_BITS=52, we need to make sure that the base address is
small enough to facilitate this.
Fixes: b6d00d47e8 ("arm64: mm: Introduce 52-bit Kernel VAs")
Signed-off-by: Kornel Dulęba <korneld@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250417114754.3238273-1-korneld@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94f2f3261 ]
For backwards compatibility reasons, when a signal return occurs which
restores SVE state, the effective lower 128 bits of each of the SVE
vector registers are restored from the corresponding FPSIMD vector
register in the FPSIMD signal frame, overriding the values in the SVE
signal frame. This is intended to be the case regardless of streaming
mode.
To make this happen, restore_sve_fpsimd_context() uses
fpsimd_update_current_state() to merge the lower 128 bits from the
FPSIMD signal frame into the SVE register state. Unfortunately,
fpsimd_update_current_state() performs this merging dependent upon
TIF_SVE, which is not always correct for streaming SVE register state:
* When restoring non-streaming SVE register state there is no observable
problem, as the signal return code configures TIF_SVE and the saved
fp_type to match before calling fpsimd_update_current_state(), which
observes either:
- TIF_SVE set AND fp_type == FP_STATE_SVE
- TIF_SVE clear AND fp_type == FP_STATE_FPSIMD
* On systems which have SME but not SVE, TIF_SVE cannot be set. Thus the
merging will never happen for the streaming SVE register state.
* On systems which have SVE and SME, TIF_SVE can be set and cleared
independently of PSTATE.SM. Thus the merging may or may not happen for
streaming SVE register state.
As TIF_SVE can be cleared non-deterministically during syscalls
(including at the start of sigreturn()), the merging may occur
non-deterministically from the perspective of userspace.
This logic has been broken since its introduction in commit:
85ed24dad2 ("arm64/sme: Implement streaming SVE signal handling")
... at which point both fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() only checked TIF SVE. When PSTATE.SM==1
and TIF_SVE was clear, signal delivery would place stale FPSIMD state
into the FPSIMD signal frame, and signal return would not merge this
into the restored register state.
Subsequently, signal delivery was fixed as part of commit:
61da7c8e2a ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... but signal restore was not given a corresponding fix, and when
TIF_SVE was clear, signal restore would still fail to merge the FPSIMD
state into the restored SVE register state. The 'Fixes' tag did not
indicate that this had been broken since its introduction.
Fix this by merging the FPSIMD state dependent upon the saved fp_type,
matching what we (currently) do during signal delivery.
As described above, when backporting this commit, it will also be
necessary to backport commit:
61da7c8e2a ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... and prior to commit:
baa8515281 ("arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE")
... it will be necessary for fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() to consider both TIF_SVE and
thread_sm_enabled(¤t->thread), in place of the saved fp_type.
Fixes: 85ed24dad2 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3eaab3c70 ]
The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state
incorrectly, and a race with preemption can result in a task having
TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SME traps enabled). This can result in warnings from
do_sme_acc() where SME traps are not expected while TIF_SME is set:
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
This is very similar to the SVE issue we fixed in commit:
751ecf6afd ("arm64/sve: Discard stale CPU state when handling SVE traps")
The race can occur when the SME trap handler is preempted before and
after manipulating the saved FPSIMD/SVE/SME state, starting and ending on
the same CPU, e.g.
| void do_sme_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SME clear, SME traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
|
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| unsigned long vq_minus_one =
| sve_vq_from_vl(task_get_sme_vl(current)) - 1;
| sme_set_vq(vq_minus_one);
|
| fpsimd_bind_task_to_cpu();
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SME traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Note: this was originallly posted as [1].
Fixes: 8bd7f91c03 ("arm64/sme: Implement traps and syscall handling for SME")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20241204-arm64-sme-reenable-v2-1-bae87728251d@kernel.org/
[ Rutland: rewrite commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 295217420a upstream.
There is a typo in sm8350.dts where the node label
mmeory@85200000 should be memory@85200000.
This patch corrects the typo for clarity and consistency.
Fixes: b7e8f433a6 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250514114656.2307828-1-alok.a.tiwari@oracle.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 573f99c758 ]
This reverts commit 531fdbeede.
Hardware that uses I2C wasn't designed with high speeds in mind, so
communication with PMIC via RSB can intermittently fail. Go back to I2C
as higher speed and efficiency isn't worth the trouble.
Fixes: 531fdbeede ("arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection")
Link: https://github.com/LibreELEC/LibreELEC.tv/issues/7731
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250413135848.67283-1-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f34621f31e ]
According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-1-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfb1d2b902 ]
pud_bad() is currently defined in terms of pud_table(). Although for some
configs, pud_table() is hard-coded to true i.e. when using 64K base pages
or when page table levels are less than 3.
pud_bad() is intended to check that the pud is configured correctly. Hence
let's open-code the same check that the full version of pud_table() uses
into pud_bad(). Then it always performs the check regardless of the config.
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250221044227.1145393-7-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e18c09b204 ]
The HIP09 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of HIP09
to the list for software mitigation.
Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com>
Link: https://lore.kernel.org/r/20250325141900.2057314-1-yangjinqian1@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dc7eb87557 upstream.
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.
Fixes: 5d0a8d2fba ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a552e2ef5f upstream.
When BPF_TRAMP_F_CALL_ORIG is enabled, the address of a bpf_tramp_image
struct on the stack is passed during the size calculation pass and
an address on the heap is passed during code generation. This may
cause a heap buffer overflow if the heap address is tagged because
emit_a64_mov_i64() will emit longer code than it did during the size
calculation pass. The same problem could occur without tag-based
KASAN if one of the 16-bit words of the stack address happened to
be all-ones during the size calculation pass. Fix the problem by
assuming the worst case (4 instructions) when calculating the size
of the bpf_tramp_image address emission.
Fixes: 19d3c179a3 ("bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://linux-review.googlesource.com/id/I1496f2bc24fba7a1d492e16e2b94cf43714f2d3c
Link: https://lore.kernel.org/bpf/20241018221644.3240898-1-pcc@google.com
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19d3c179a3 upstream.
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes: efc9909fdc ("bpf, arm64: Add bpf trampoline for arm64")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/all/SJ0PR15MB461564D3F7E7A763498CA6A8CBDB2@SJ0PR15MB4615.namprd15.prod.outlook.com/
Link: https://lore.kernel.org/bpf/20240711151838.43469-1-puranjay@kernel.org
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f300769ead upstream.
Support for eBPF programs loaded by unprivileged users is typically
disabled. This means only cBPF programs need to be mitigated for BHB.
In addition, only mitigate cBPF programs that were loaded by an
unprivileged user. Privileged users can also load the same program
via eBPF, making the mitigation pointless.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0dfefc2ea2 upstream.
A malicious BPF program may manipulate the branch history to influence
what the hardware speculates will happen next.
On exit from a BPF program, emit the BHB mititgation sequence.
This is only applied for 'classic' cBPF programs that are loaded by
seccomp.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1152be30a upstream.
Add a helper to expose the k value of the branchy loop. This is needed
by the BPF JIT to generate the mitigation sequence in BPF programs.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7956c92f3 upstream.
is_spectre_bhb_fw_affected() allows the caller to determine if the CPU
is known to need a firmware mitigation. CPUs are either on the list
of CPUs we know about, or firmware has been queried and reported that
the platform is affected - and mitigated by firmware.
This helper is not useful to determine if the platform is mitigated
by firmware. A CPU could be on the know list, but the firmware may
not be implemented. Its affected but not mitigated.
spectre_bhb_enable_mitigation() handles this distinction by checking
the firmware state before enabling the mitigation.
Add a helper to expose this state. This will be used by the BPF JIT
to determine if calling firmware for a mitigation is necessary and
supported.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63de8abd97 upstream.
To generate code in the eBPF epilogue that uses the DSB instruction,
insn.c needs a heler to encode the type and domain.
Re-use the crm encoding logic from the DMB instruction.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5591ce0069 upstream.
Define vqmmc regulator-gpio for usdhc2 with vin-supply
coming from LDO5.
Without this definition LDO5 will be powered down, disabling
SD card after bootup. This has been introduced in commit
f5aab0438e ("regulator: pca9450: Fix enable register for LDO5").
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438e ("regulator: pca9450: Fix enable register for LDO5")
Tested-by: Manuel Traut <manuel.traut@mt.com>
Reviewed-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@mt.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fee4d17145 upstream.
Commit a5951389e5 ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69 ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries.
Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e5 ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 59419f1004 ]
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the
CPU, the host's active SVE VL may differ from the guest's maximum SVE VL:
* For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained
by the guest hypervisor, which may be less than or equal to that
guest's maximum VL.
Note: in this case the value of ZCR_EL1 is immaterial due to E2H.
* For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest,
which may be less than or greater than the guest's maximum VL.
Note: in this case hyp code traps host SVE usage and lazily restores
ZCR_EL2 to the host's maximum VL, which may be greater than the
guest's maximum VL.
This can be the case between exiting a guest and kvm_arch_vcpu_put_fp().
If a softirq is taken during this period and the softirq handler tries
to use kernel-mode NEON, then the kernel will fail to save the guest's
FPSIMD/SVE state, and will pend a SIGKILL for the current thread.
This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live
FPSIMD/SVE state with the guest's maximum SVE VL, and
fpsimd_save_user_state() verifies that the live SVE VL is as expected
before attempting to save the register state:
| if (WARN_ON(sve_get_vl() != vl)) {
| force_signal_inject(SIGKILL, SI_KERNEL, 0, 0);
| return;
| }
Fix this and make this a bit easier to reason about by always eagerly
switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this
happening, there's no need to trap host SVE usage, and the nVHE/nVHE
__deactivate_cptr_traps() logic can be simplified to enable host access
to all present FPSIMD/SVE/SME features.
In protected nVHE/hVHE modes, the host's state is always saved/restored
by hyp, and the guest's state is saved prior to exit to the host, so
from the host's PoV the guest never has live FPSIMD/SVE/SME state, and
the host's ZCR_EL1 is never clobbered by hyp.
Fixes: 8c8010d69c ("KVM: arm64: Save/restore SVE state for nVHE")
Fixes: 2e3cf82063 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ v6.6 lacks pKVM saving of host SVE state, pull in discovery of maximum
host VL separately -- broonie ]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fd5b4b0e7 ]
Similar to VHE, calculate the value of cptr_el2 from scratch on
activate traps. This removes the need to store cptr_el2 in every
vcpu structure. Moreover, some traps, such as whether the guest
owns the fp registers, need to be set on every vcpu run.
Reported-by: James Clark <james.clark@linaro.org>
Fixes: 5294afdbf4 ("KVM: arm64: Exclude FP ownership from kvm_vcpu_arch")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-13-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9dd00de1e ]
The shared hyp switch header has a number of static functions which
might not be used by all files that include the header, and when unused
they will provoke compiler warnings, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:703:13: warning: 'kvm_hyp_handle_dabt_low' defined but not used [-Wunused-function]
| 703 | static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:682:13: warning: 'kvm_hyp_handle_cp15_32' defined but not used [-Wunused-function]
| 682 | static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:662:13: warning: 'kvm_hyp_handle_sysreg' defined but not used [-Wunused-function]
| 662 | static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:458:13: warning: 'kvm_hyp_handle_fpsimd' defined but not used [-Wunused-function]
| 458 | static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:329:13: warning: 'kvm_hyp_handle_mops' defined but not used [-Wunused-function]
| 329 | static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~
Mark these functions as 'inline' to suppress this warning. This
shouldn't result in any functional change.
At the same time, avoid the use of __alias() in the header and alias
kvm_hyp_handle_iabt_low() and kvm_hyp_handle_watchpt_low() to
kvm_hyp_handle_memory_fault() using CPP, matching the style in the rest
of the kernel. For consistency, kvm_hyp_handle_memory_fault() is also
marked as 'inline'.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b66195063 ]
The hyp exit handling logic is largely shared between VHE and nVHE/hVHE,
with common logic in arch/arm64/kvm/hyp/include/hyp/switch.h. The code
in the header depends on function definitions provided by
arch/arm64/kvm/hyp/vhe/switch.c and arch/arm64/kvm/hyp/nvhe/switch.c
when they include the header.
This is an unusual header dependency, and prevents the use of
arch/arm64/kvm/hyp/include/hyp/switch.h in other files as this would
result in compiler warnings regarding missing definitions, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:733:31: warning: 'kvm_get_exit_handler_array' used but never defined
| 733 | static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:735:13: warning: 'early_exit_filter' used but never defined
| 735 | static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
| | ^~~~~~~~~~~~~~~~~
Refactor the logic such that the header doesn't depend on anything from
the C files. There should be no functional change as a result of this
patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-7-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 407a99c465 ]
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic
has historically been broken, and is currently redundant.
This logic was originally introduced in commit:
861262ab86 ("KVM: arm64: Handle SME host state when running guests")
At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when
returning to the host, trapping host access to SME state. Unfortunately,
this was unsafe as the host could take a softirq before calling
kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode
NEON the resulting attempt to save the live FPSIMD/SVE/SME state would
result in a fatal trap.
That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always
saved/restored the host kernel's CPACR_EL1 value, and configured
CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be
trapped.
The issue above was incidentally fixed by commit:
375110ab51 ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE")
That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01
when returning to the host, permitting host kernel usage of SME,
avoiding the issue described above. At the time, this was not identified
as a fix for commit 861262ab86.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SME trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Update for rework of flags storage -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 459f059be7 ]
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.ZEN (i.e. CPTR_EL2.ZEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic is
currently redundant.
The VHE hyp code unconditionally configures CPTR_EL2.ZEN to 0b01 when
returning to the host, permitting host kernel usage of SVE.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SVE trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-4-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Rework for refactoring of where the flags are stored -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8eca7f6d51 ]
Now that the host eagerly saves its own FPSIMD/SVE/SME state,
non-protected KVM never needs to save the host FPSIMD/SVE/SME state,
and the code to do this is never used. Protected KVM still needs to
save/restore the host FPSIMD/SVE state to avoid leaking guest state to
the host (and to avoid revealing to the host whether the guest used
FPSIMD/SVE/SME), and that code needs to be retained.
Remove the unused code and data structures.
To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the
VHE hyp code, the nVHE/hVHE version is moved into the shared switch
header, where it is only invoked when KVM is in protected mode.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fbc7e61195 ]
There are several problems with the way hyp code lazily saves the host's
FPSIMD/SVE state, including:
* Host SVE being discarded unexpectedly due to inconsistent
configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to
result in QEMU crashes where SVE is used by memmove(), as reported by
Eric Auger:
https://issues.redhat.com/browse/RHEL-68997
* Host SVE state is discarded *after* modification by ptrace, which was an
unintentional ptrace ABI change introduced with lazy discarding of SVE state.
* The host FPMR value can be discarded when running a non-protected VM,
where FPMR support is not exposed to a VM, and that VM uses
FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR
before unbinding the host's FPSIMD/SVE/SME state, leaving a stale
value in memory.
Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME
state when loading a vCPU such that KVM does not need to save any of the
host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is
removed and the necessary call to fpsimd_save_and_flush_cpu_state() is
placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr'
should not be used, they are set to NULL; all uses of these will be
removed in subsequent patches.
Historical problems go back at least as far as v5.17, e.g. erroneous
assumptions about TIF_SVE being clear in commit:
8383741ab2 ("KVM: arm64: Get rid of host SVE tracking/saving")
... and so this eager save+flush probably needs to be backported to ALL
stable trees.
Fixes: 93ae6b01ba ("KVM: arm64: Discard any SVE state when entering KVM guests")
Fixes: 8c845e2731 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
Fixes: ef3be86021 ("KVM: arm64: Add save/restore support for FPMR")
Reported-by: Eric Auger <eauger@redhat.com>
Reported-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-2-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ Mark: Handle vcpu/host flag conflict, remove host_data_ptr() ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62021cc36a ]
Now that we are explicitly telling the host FP code which register state
it needs to save we can remove the manipulation of TIF_SVE from the KVM
code, simplifying it and allowing us to optimise our handling of normal
tasks. Remove the manipulation of TIF_SVE from KVM and instead rely on
to_save to ensure we save the correct data for it.
There should be no functional or performance impact from this change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit deeb8f9a80 ]
In order to avoid needlessly saving and restoring the guest registers KVM
relies on the host FPSMID code to save the guest registers when we context
switch away from the guest. This is done by binding the KVM guest state to
the CPU on top of the task state that was originally there, then carefully
managing the TIF_SVE flag for the task to cause the host to save the full
SVE state when needed regardless of the needs of the host task. This works
well enough but isn't terribly direct about what is going on and makes it
much more complicated to try to optimise what we're doing with the SVE
register state.
Let's instead have KVM pass in the register state it wants saving when it
binds to the CPU. We introduce a new FP_STATE_CURRENT for use
during normal task binding to indicate that we should base our
decisions on the current task. This should not be used when
actually saving. Ideally we might want to use a separate enum for
the type to save but this enum and the enum values would then
need to be named which has problems with clarity and ambiguity.
In order to ease any future debugging that might be required this patch
does not actually update any of the decision making about what to save,
it merely starts tracking the new information and warns if the requested
state is not what we would otherwise have decided to save.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115094640.112848-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
