[ Upstream commit 36305857b1 ]
This reverts commit 4700a00755.
It breaks target-module@2b300050 ("ti,sysc-omap2") probe on AM62x in a case
when minimally-configured system tries to network-boot:
[ 6.888776] probe of 2b300050.target-module returned 517 after 258 usecs
[ 17.129637] probe of 2b300050.target-module returned 517 after 708 usecs
[ 17.137397] platform 2b300050.target-module: deferred probe pending: (reason unknown)
[ 26.878471] Waiting up to 100 more seconds for network.
There are minimal configurations possible when the deferred device is not
being probed any more (because everything else has been successfully
probed) and deferral lists are not processed any more.
Stable mmc enumeration can be achieved by filling /aliases node properly
(4700a00755 commit's rationale).
After revert:
[ 9.006816] IP-Config: Complete:
[ 9.010058] device=lan0, ...
Tested-by: Andreas Kemnade <andreas@kemnade.info> # GTA04, Panda, BT200
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250401090643.2776793-1-alexander.sverdlin@siemens.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23d0601368 ]
In case the MC firmware runs in debug mode with extensive prints pushed
to the console, the current timeout of 500ms is not enough.
Increase the timeout value so that we don't have any chance of wrongly
assuming that the firmware is not responding when it's just taking more
time.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-7-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c78230ad34 upstream.
Command ids for taildrop get/set can not pass the check when they are
using from the restool user space utility. Correct them according to the
user manual.
Fixes: d67cc29e6d ("bus: fsl-mc: list more commands as accepted through the ioctl")
Signed-off-by: Wan Junjie <junjie.wan@inceptio.ai>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-4-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd7d8e012b upstream.
The fsl-mc bus associated to the root DPRC in a DPAA2 system exports a
device file for userspace access to the MC firmware. In case the DPRC's
local MC portal (DPMCP) is currently in use, a new DPMCP device is
allocated through the fsl_mc_portal_allocate() function.
In this case, the call to fsl_mc_portal_allocate() will fail with -EINVAL
when trying to add a device link between the root DPRC (consumer) and
the newly allocated DPMCP device (supplier). This is because the DPMCP
is a dependent of the DPRC device (the bus).
Fix this by not adding a device link in case the DPMCP is allocated for
the root DPRC's usage.
Fixes: afb7742281 ("bus: fsl-mc: automatically add a device_link on fsl_mc_[portal,object]_allocate")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250408105814.2837951-3-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d92e7c5cc upstream.
When mhi_async_power_up() enables IRQs, it is possible that we could
receive a SYSERR notification from the device if the firmware has crashed
for some reason. Then the SYSERR notification queues a work item that
cannot execute until the pm_mutex is released by mhi_async_power_up().
So the SYSERR work item will be pending. If mhi_async_power_up() detects
the SYSERR, it will handle it. If the device is in PBL, then the PBL state
transition event will be queued, resulting in a work item after the
pending SYSERR work item. Once mhi_async_power_up() releases the pm_mutex,
the SYSERR work item can run. It will blindly attempt to reset the MHI
state machine, which is the recovery action for SYSERR. PBL/SBL are not
interrupt driven and will ignore the MHI Reset unless SYSERR is actively
advertised. This will cause the SYSERR work item to timeout waiting for
reset to be cleared, and will leave the host state in SYSERR processing.
The PBL transition work item will then run, and immediately fail because
SYSERR processing is not a valid state for PBL transition.
This leaves the device uninitialized.
This issue has a fairly unique signature in the kernel log:
mhi mhi3: Requested to power ON
Qualcomm Cloud AI 100 0000:36:00.0: Fatal error received from
device. Attempting to recover
mhi mhi3: Power on setup success
mhi mhi3: Device failed to exit MHI Reset state
mhi mhi3: Device MHI is not in valid state
We cannot remove the SYSERR handling from mhi_async_power_up() because the
device may be in the SYSERR state, but we missed the notification as the
irq was fired before irqs were enabled. We also can't queue the SYSERR work
item from mhi_async_power_up() if SYSERR is detected because that may
result in a duplicate work item, and cause the same issue since the
duplicate item will blindly issue MHI reset even if SYSERR is no longer
active.
Instead, add a check in the SYSERR work item to make sure that MHI reset is
only issued if the device is in SYSERR state for PBL or SBL EEs.
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250328163526.3365497-1-jeff.hugo@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d694bf8a9a ]
The blamed commit tried to simplify how the deallocations are done but,
in the process, introduced a double-free on the mc_dev variable.
In case the MC device is a DPRC, a new mc_bus is allocated and the
mc_dev variable is just a reference to one of its fields. In this
circumstance, on the error path only the mc_bus should be freed.
This commit introduces back the following checkpatch warning which is a
false-positive.
WARNING: kfree(NULL) is safe and this check is probably not required
+ if (mc_bus)
+ kfree(mc_bus);
Fixes: a042fbed02 ("staging: fsl-mc: simplify couple of deallocations")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-2-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0686a818d7 upstream.
A client driver may use mhi_unprepare_from_transfer() to quiesce
incoming data during the client driver's tear down. The client driver
might also be processing data at the same time, resulting in a call to
mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs
after mhi_unprepare_from_transfer() has torn down the channel, a panic
will occur due to an invalid dereference leading to a page fault.
This occurs because mhi_gen_tre() does not verify the channel state
after locking it. Fix this by having mhi_gen_tre() confirm the channel
state is valid, or return error to avoid accessing deinitialized data.
Cc: stable@vger.kernel.org # 6.8
Fixes: b89b6a863d ("bus: mhi: host: Add spinlock to protect WP access when queueing TREs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Link: https://lore.kernel.org/r/20250306172913.856982-1-jeff.hugo@oss.qualcomm.com
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a321d163de upstream.
There are multiple places from where the recovery work gets scheduled
asynchronously. Also, there are multiple places where the caller waits
synchronously for the recovery to be completed. One such place is during
the PM shutdown() callback.
If the device is not alive during recovery_work, it will try to reset the
device using pci_reset_function(). This function internally will take the
device_lock() first before resetting the device. By this time, if the lock
has already been acquired, then recovery_work will get stalled while
waiting for the lock. And if the lock was already acquired by the caller
which waits for the recovery_work to be completed, it will lead to
deadlock.
This is what happened on the X1E80100 CRD device when the device died
before shutdown() callback. Driver core calls the driver's shutdown()
callback while holding the device_lock() leading to deadlock.
And this deadlock scenario can occur on other paths as well, like during
the PM suspend() callback, where the driver core would hold the
device_lock() before calling driver's suspend() callback. And if the
recovery_work was already started, it could lead to deadlock. This is also
observed on the X1E80100 CRD.
So to fix both issues, use pci_try_reset_function() in recovery_work. This
function first checks for the availability of the device_lock() before
trying to reset the device. If the lock is available, it will acquire it
and reset the device. Otherwise, it will return -EAGAIN. If that happens,
recovery_work will fail with the error message "Recovery failed" as not
much could be done.
Cc: stable@vger.kernel.org # 5.12
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/mhi/Z1me8iaK7cwgjL92@hovoldconsulting.com
Fixes: 7389337f0a ("mhi: pci_generic: Add suspend/resume/recovery procedure")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Analyzed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/mhi/Z2KKjWY2mPen6GPL@hovoldconsulting.com/
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20250108-mhi_recovery_fix-v1-1-a0a00a17da46@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfc5ca0fd1 upstream.
Add a mhi_pci_dev_info struct specific for the Telit FE990A modem in
order to use the correct product name.
Cc: stable@vger.kernel.org # 6.1+
Fixes: 0724869ede ("bus: mhi: host: pci_generic: add support for Telit FE990 modem")
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240820080439.837666-1-fabio.porcedda@gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bce3f77068 ]
When processing a SYSERR, if the device does not respond to the MHI_RESET
from the host, the host will be stuck in a difficult to recover state.
The host will remain in MHI_PM_SYS_ERR_PROCESS and not clean up the host
channels. Clients will not be notified of the SYSERR via the destruction
of their channel devices, which means clients may think that the device is
still up. Subsequent SYSERR events such as a device fatal error will not
be processed as the state machine cannot transition from PROCESS back to
DETECT. The only way to recover from this is to unload the mhi module
(wipe the state machine state) or for the mhi controller to initiate
SHUTDOWN.
This issue was discovered by stress testing soc_reset events on AIC100
via the sysfs node.
soc_reset is processed entirely in hardware. When the register write
hits the endpoint hardware, it causes the soc to reset without firmware
involvement. In stress testing, there is a rare race where soc_reset N
will cause the soc to reset and PBL to signal SYSERR (fatal error). If
soc_reset N+1 is triggered before PBL can process the MHI_RESET from the
host, then the soc will reset again, and re-run PBL from the beginning.
This will cause PBL to lose all state. PBL will be waiting for the host
to respond to the new syserr, but host will be stuck expecting the
previous MHI_RESET to be processed.
Additionally, the AMSS EE firmware (QSM) was hacked to synthetically
reproduce the issue by simulating a FW hang after the QSM issued a
SYSERR. In this case, soc_reset would not recover the device.
For this failure case, to recover the device, we need a state similar to
PROCESS, but can transition to DETECT. There is not a viable existing
state to use. POR has the needed transitions, but assumes the device is
in a good state and could allow the host to attempt to use the device.
Allowing PROCESS to transition to DETECT invites the possibility of
parallel SYSERR processing which could get the host and device out of
sync.
Thus, invent a new state - MHI_PM_SYS_ERR_FAIL
This essentially a holding state. It allows us to clean up the host
elements that are based on the old state of the device (channels), but
does not allow us to directly advance back to an operational state. It
does allow the detection and processing of another SYSERR which may
recover the device, or allows the controller to do a clean shutdown.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240112180800.536733-1-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4acd21a45c ]
Update the architecture dependency to be the generic Tegra
because the driver works on the four latest Tegra generations
not just Tegra210, if you build a kernel with a specific
ARCH_TEGRA_xxx_SOC option that excludes Tegra210 you don't get
this driver.
Fixes: 46a88534af ("bus: Add support for Tegra ACONNECT")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaafe88d55 ]
The moxtet module fails to auto-load on. Add a SPI id table to
allow it to do so.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 987fdb5a43 ]
It is possible that the host controller driver would use DMA framework to
write the event ring element. So avoid allocating event ring element on the
stack as DMA cannot work on vmalloc memory.
Cc: stable@vger.kernel.org
Fixes: 961aeb6892 ("bus: mhi: ep: Add support for sending events to the host")
Link: https://lore.kernel.org/r/20230901073502.69385-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b89b6a863d upstream.
Protect WP accesses such that multiple threads queueing buffers for
incoming data do not race.
Meanwhile, if CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once
__local_bh_enable_ip is called as part of write_unlock_bh. Hence, let's
take irqsave lock after TRE is generated to avoid running write_unlock_bh
when irqsave lock is held.
Cc: stable@vger.kernel.org
Fixes: 189ff97cca ("bus: mhi: core: Add support for data transfer")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-2-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01bd694ac2 upstream.
Ensure read and write locks for the channel are not taken in succession by
dropping the read lock from parse_xfer_event() such that a callback given
to client can potentially queue buffers and acquire the write lock in that
process. Any queueing of buffers should be done without channel read lock
acquired as it can result in multiple locks and a soft lockup.
Cc: <stable@vger.kernel.org> # 5.7
Fixes: 1d3173a3ba ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-3-git-send-email-quic_qianyu@quicinc.com
[mani: added fixes tag and cc'ed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eff9704f53 upstream.
Though we do check the event ring read pointer by "is_valid_ring_ptr"
to make sure it is in the buffer range, but there is another risk the
pointer may be not aligned. Since we are expecting event ring elements
are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer
could lead to multiple issues like DoS or ring buffer memory corruption.
So add a alignment check for event ring read pointer.
Fixes: ec32332df7 ("bus: mhi: core: Sanity check values from remote device before use")
cc: stable@vger.kernel.org
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231031-alignment_check-v2-1-1441db7c5efd@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f71f6ff8c1 upstream.
Commit 34539b442b ("bus: ti-sysc: Flush posted write on enable before
reset") caused a regression reproducable on omap4 duovero where the ISS
target module can produce interconnect errors on boot. Turns out the
registers are not accessible until after a delay for devices needing
a ti,sysc-delay-us value.
Let's fix this by flushing the posted write only after the reset delay.
We do flushing also for ti,sysc-delay-us using devices as that should
trigger an interconnect error if the delay is not properly configured.
Let's also add some comments while at it.
Fixes: 34539b442b ("bus: ti-sysc: Flush posted write on enable before reset")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5deb8f76e ]
The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of
SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE
is used to force idle target modules rather than block idle during usage.
The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when
a target module is active, and configure autoidle and wake-up when a
target module is inactive. We are missing configuring the target module
on sysc_disable_module(), and missing toggling of the wake-up bit.
Let's fix the issue to allow uart wake-up to work.
Fixes: fb685f1c19 ("bus: ti-sysc: Handle swsup idle mode quirks")
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11729caa52 ]
Commit feaa8baee8 ("bus: ti-sysc: Implement SoC revision handling")
created a list of SoC types searching for strings based on names
and wildcards which associates the SoC to different families.
The OMAP34xx and OMAP35xx are treated as SOC_3430 while
OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx
isn't listed.
The AM35xx is mostly an OMAP3430, and a later commit a12315d6d2
("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks
for the SOC type and behaves in a certain way if it's SOC_3430.
This caused a regression on the AM3517 causing it to return two
errors:
ti-sysc: probe of 48318000.target-module failed with error -16
ti-sysc: probe of 49032000.target-module failed with error -16
Fix this by treating the creating SOC_AM35 and inserting it between
the SOC_3430 and SOC_3630. If it is treaed the same way as the
SOC_3430 when checking the status of sysc_check_active_timer,
the error conditions will disappear.
Fixes: a12315d6d2 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific")
Fixes: feaa8baee8 ("bus: ti-sysc: Implement SoC revision handling")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-ID: <20230906233442.270835-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d929b2b746 ]
The am335x-evm started producing boot errors because of subtle timing
changes:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010
...
sysc_reset from sysc_probe+0xf60/0x1514
sysc_probe from platform_probe+0x5c/0xbc
...
The fix consists in using the appropriate sleep function in sysc reset.
For flexible sleeping, fsleep is recommended. Here, sysc delay parameter
can take any value in [0 - 255] us range. As a result, fsleep() should
be used, calling udelay() for a sysc delay lower than 10 us.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Fixes: e709ed70d1 ("bus: ti-sysc: Fix missing reset delay handling")
Message-ID: <20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03a711d3cb ]
Enable the uart quirks similar to the earlier SoCs. Let's assume we are
likely going to need a k3 specific quirk mask separate from the earlier
SoCs, so let's not start changing the revision register mask at this point.
Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the
need for pm_runtime_irq_safe() from 8250_omap driver.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cabce92dd8 upstream.
In RDDM EE, device can not process MHI reset issued by host. In case of MHI
power off, host is issuing MHI reset and polls for it to get cleared until
it times out. Since this timeout can not be avoided in case of RDDM, skip
the MHI reset in this scenarios.
Cc: <stable@vger.kernel.org>
Fixes: a6e2e3522f ("bus: mhi: core: Add support for PM state transitions")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1684390959-17836-1-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a50d9403f upstream.
When loading a DT overlay that creates a device, the device is not
probed, unless the DT overlay is unloaded and reloaded again.
After the recent refactoring to improve fw_devlink, it no longer depends
on the "compatible" property to identify which device tree nodes will
become struct devices. fw_devlink now picks up dangling consumers
(consumers pointing to descendent device tree nodes of a device that
aren't converted to child devices) when a device is successfully bound
to a driver. See __fw_devlink_pickup_dangling_consumers().
However, during DT overlay, a device's device tree node can have
sub-nodes added/removed without unbinding/rebinding the driver. This
difference in behavior between the normal device instantiation and
probing flow vs. the DT overlay flow has a bunch of implications that
are pointed out elsewhere[1]. One of them is that the fw_devlink logic
to pick up dangling consumers is never exercised.
This patch solves the fw_devlink issue by marking all DT nodes added by
DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become
device), and by clearing the flag when a struct device is actually
created for the DT node. This way, fw_devlink knows not to have
consumers waiting on these newly added DT nodes, and to propagate the
dependency to an ancestor DT node that has the corresponding struct
device.
Based on a patch by Saravana Kannan, which covered only platform and spi
devices.
[1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com
Fixes: 4a032827da ("of: property: Simplify of_link_to_phandle()")
Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e1e1e9bb9d ]
Fix "warning: cast from pointer to integer of different size" on 64-bit
builds.
Note that this is a cosmetic fix at this point as the driver is not yet
used for 64-bit systems.
Fixes: feaa8baee8 ("bus: ti-sysc: Implement SoC revision handling")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34539b442b ]
The am335x devices started producing boot errors for resetting musb module
in because of subtle timing changes:
Unhandled fault: external abort on non-linefetch (0x1008)
...
sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12
sysc_reset from sysc_probe+0xa99/0xeb0
...
The fix is to flush posted write after enable before reset during
probe. Note that some devices also need to specify the delay after enable
with ti,sysc-delay-us, but this is not needed for musb on am335x based on
my tests.
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html
Fixes: 596e795569 ("bus: ti-sysc: Add support for software reset")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f620596fa3 ]
Fix warning drivers/bus/ti-sysc.c:1806 sysc_quirk_dispc()
warn: masking a bool.
While at it let's add a comment for what were doing to make
the code a bit easier to follow.
Fixes: 7324a7a0d5 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-omap/a8ec8a68-9c2c-4076-bf47-09fccce7659f@kili.mountain/
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6a0c637bfe upstream.
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device.
Fixes: 6cd330ae76 ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1679674384-27209-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d1493bdc2 upstream.
If firmware loading fails, the controller's pm_state is updated to
MHI_PM_FW_DL_ERR unconditionally. This can corrupt the pm_state as the
update is not done under the proper lock, and also does not validate
the state transition. The firmware loading can fail due to a detected
syserr, but if MHI_PM_FW_DL_ERR is unconditionally set as the pm_state,
the handling of the syserr can break when it attempts to transition from
syserr detect, to syserr process.
By grabbing the lock, we ensure we don't race with some other pm_state
update. By using mhi_try_set_pm_state(), we check that the transition
to MHI_PM_FW_DL_ERR is valid via the state machine logic. If it is not
valid, then some other transition is occurring like syserr processing, and
we assume that will resolve the firmware loading error.
Fixes: 12e050c77b ("bus: mhi: core: Move to an error state on any firmware load failure")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-3-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d469d9448a upstream.
If we detect a system error via intvec, we only process the syserr if the
current ee is different than the last observed ee. The reason for this
check is to prevent bhie from running multiple times, but with the single
queue handling syserr, that is not possible.
The check can cause an issue with device recovery. If PBL loads a bad SBL
via BHI, but that SBL hangs before notifying the host of an ee change,
then issuing soc_reset to crash the device and retry (after supplying a
fixed SBL) will not recover the device as the host will observe a PBL->PBL
transition and not process the syserr. The device will be stuck until
either the driver is reloaded, or the host is rebooted. Instead, remove
the check so that we can attempt to recover the device.
Fixes: ef2126c4e2 ("bus: mhi: core: Process execution environment changes serially")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-2-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1adab2922c upstream.
If bus type is other than imx50_weim_devtype and have no child devices,
variable 'ret' in function weim_parse_dt() will not be initialized, but
will be used as branch condition and return value. Fix this by
initializing 'ret' with 0.
This was discovered with help of clang-analyzer, but the situation is
quite possible in real life.
Fixes: 52c47b6341 ("bus: imx-weim: improve error handling upon child probe-failure")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1ddc761829 ]
state_lock, the spinlock type is meant to protect race against concurrent
MHI state transitions. In mhi_ep_set_m0_state(), while the state_lock is
being held, the channels are resumed in mhi_ep_resume_channels() if the
previous state was M3. This causes sleeping in atomic bug, since
mhi_ep_resume_channels() use mutex internally.
Since the state_lock is supposed to be held throughout the state change,
it is not ideal to drop the lock before calling mhi_ep_resume_channels().
So to fix this issue, let's change the type of state_lock to mutex. This
would also allow holding the lock throughout all state transitions thereby
avoiding any potential race.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f3 ("bus: mhi: ep: Add support for suspending and resuming channels")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47a1dcaea0 ]
During graceful shutdown scenario, host will issue MHI RESET to the
endpoint device before initiating shutdown. In that case, it makes sense
to completely power down the MHI stack as sooner or later the access to
MMIO registers will be prohibited. Also, the stack needs to be powered
up in the case of SYS_ERR to recover the device.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 1ddc761829 ("bus: mhi: ep: Change state_lock to mutex")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a1c24bb90 upstream.
During suspend and resume, the channel state needs to be saved locally.
Otherwise, the endpoint may access the channels while they were being
suspended and causing access violations.
Fix it by saving the channel state locally during suspend and resume.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f3 ("bus: mhi: ep: Add support for suspending and resuming channels")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com)
Link: https://lore.kernel.org/r/20221228161704.255268-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d6a1fea53 upstream.
There is a good chance that while the channel ring gets processed, the STOP
or RESET command for the channel might be received from the MHI host. In
those cases, the entire channel ring processing needs to be protected by
chan->lock to prevent the race where the corresponding channel ring might
be reset.
While at it, let's also add a sanity check to make sure that the ring is
started before processing it. Because, if the STOP/RESET command gets
processed while mhi_ep_ch_ring_worker() waited for chan->lock, the ring
would've been reset.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: 03c0bb8ec9 ("bus: mhi: ep: Add support for processing channel rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6cebcc275 upstream.
For the STOP and RESET commands, only send the channel disconnect status
-ENOTCONN if client driver is available. Otherwise, it will result in
null pointer dereference.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e827569062 ("bus: mhi: ep: Add support for processing command rings")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221228161704.255268-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f71eaf2708 ]
The sunxi_rsb_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
the sunxi_rsb_bus is not unregistered.
Fix by unregister sunxi_rsb_bus when platform_driver_register() failed.
Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221123094200.12036-1-yuancan@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 869a99907f upstream.
There is a race condition where mhi_prepare_channel() updates the
read and write pointers as the base address and in parallel, if
an M0 transition occurs, the tasklet goes ahead and rings
doorbells for all channels with a delta in TRE rings assuming
they are already enabled. This causes a null pointer access. Fix
it by adding a channel enabled check before ringing channel
doorbells.
Cc: stable@vger.kernel.org # 5.19
Fixes: a6e2e3522f "bus: mhi: core: Add support for PM state transitions"
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1665889532-13634-1-git-send-email-quic_qianyu@quicinc.com
[mani: CCed stable list]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We face some regressions on a few IXP42x systems when
accessing flash, the following unrelated error prints
appear from the PCI driver:
ixp4xx-pci c0000000.pci: PCI: abort_handler addr = 0xff9ffb5f,
isr = 0x0, status = 0x22a0
ixp4xx-pci c0000000.pci: imprecise abort
(...)
It turns out that while bit 7 is masked "reserved" it is
not unused, so masking it off as zero is dangerous, and
breaks flash access on some systems such as the NSLU2.
Be more careful and avoid masking off any of the reserved
bits 7, 8, 9 or 30. Only keep masking EXP_WORD (bit 2)
on IXP43x which is necessary in some setups.
Fixes: 1c953bda90 ("bus: ixp4xx: Add a driver for IXP4xx expansion bus")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221122134411.2030372-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When communicating with a PMIC during system poweroff (pm_power_off()),
IRQs are disabled and we are in a RCU read-side critical section, so we
cannot use wait_for_completion_io_timeout(). Instead, poll the status
register for transfer completion.
Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221114015749.28490-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Shutting down the RSB controller prevents communicating with a PMIC
inside pm_power_off(), since that gets called after device_shutdown(),
so it breaks system poweroff on some boards.
Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Fixes: 843107498f ("bus: sunxi-rsb: Implement suspend/resume/shutdown callbacks")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221114015749.28490-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
--------
- Print the modem name while probing the MHI host pci-generic driver. This has
been exposed as a debug information so far but on a low storate embedded
devices such as OpenWRT based products, this helps in identifying the
attached modem without enabling the debug logs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmMkL08ACgkQVZ8R5v6R
zvUKLggAgcL/EJDy/E6akyNJcnmoTOZirZbnRNhTNzJm3ekJ6V3g87pbCP8trtCy
54em7dPFtSs4Acg3p21y6kaMGuXFDgCkzspkQ2hLTlBj37vKWxPlwiI5og063eRL
F95jEUXaptWv+7UkDQJAbsceQ9hlMOumOZIwP1CMQkclocikNbZPlg/FO/Mq1ero
NTZWx5M1faVqSizrC68lt+fkMxFTI+uDvH7SlaDN8lu/WcmHiWSlaoQo0yb9ll/4
xoo1Si8oaru1cdmkkFT6B14+eZ80P8+OLd6R3m+ujBVItAQ4eycF27GmXdlLaVJb
rHa0in5wv6q6tL01A+hb5Vx2x1Iuiw==
=hL6i
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
"MHI Host
--------
- Print the modem name while probing the MHI host pci-generic driver. This has
been exposed as a debug information so far but on a low storate embedded
devices such as OpenWRT based products, this helps in identifying the
attached modem without enabling the debug logs."
* tag 'mhi-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: always print detected modem name
