[ Upstream commit 596a977b34 ]
The ddrphy is supplied by the dpll, but due to the limited number of PLLs
on the rk3036, the dpll also is used for other periperhals, like the GPU.
So it happened, when the Lima driver turned off the gpu clock, this in
turn also disabled the dpll and thus the ram.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503202532.992033-4-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit daf004f87c upstream.
SPICC is missing fclk_div2, which means fclk_div5 and fclk_div7 indexes
are wrong on this clock. This causes the spicc module to output sclk at
2.5x the expected rate when clock index 3 is picked.
Adding the missing fclk_div2 resolves this.
[jbrunet: amended commit description]
Fixes: a18c8e0b76 ("clk: meson: g12a: add support for the SPICC SCLK Source clocks")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Da Xue <da@libre.computer>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250512142617.2175291-1-da@libre.computer
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 73c46d9a93 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
raspberrypi_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 93d2725aff ("clk: bcm: rpi: Discover the firmware clocks")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250402020513.42628-1-bsdhenrymartin@gmail.com
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d988b0b866 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used, with the exception of
gpu_cx_gdsc which has an explicit value (qcom,clk-dis-wait-val = <8>).
Fixes: 013804a727 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-4-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afdfd829a9 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-3-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673989d271 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 837519775f ("clk: qcom: Add display clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-2-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98e6da673c ]
The D1/R528/T113 SoCs have a hidden divider of 2 in the MMC mod clocks,
just as other recent SoCs. So far we did not describe that, which led
to the resulting MMC clock rate to be only half of its intended value.
Use a macro that allows to describe a fixed post-divider, to compensate
for that divisor.
This brings the MMC performance on those SoCs to its expected level,
so about 23 MB/s for SD cards, instead of the 11 MB/s measured so far.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Reported-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250501120631.837186-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52b10b591f ]
Update some RCGs on the sm8250 camera clock controller to use
clk_rcg2_shared_ops. The shared_ops ensure the RCGs get parked
to the XO during clock disable to prevent the clocks from locking up
when the GDSC is enabled. These mirror similar fixes for other controllers
such as commit e5c359f70e ("clk: qcom: camcc: Update the clock ops for
the SC7180").
Signed-off-by: Jordan Crouse <jorcrous@amazon.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250122222612.32351-1-jorcrous@amazon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a243e1b81 ]
If regmap_read() fails, random stack value was used in calculating new
frequency in recalc_rate() callbacks. Such failure is really not
expected as these are all MMIO reads, however code should be here
correct and bail out. This also avoids possible warning on
uninitialized value.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-1-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06a61b5cb6 ]
The IMX8MPCEC datasheet lists maximum frequencies allowed for different
modules. Some of these limits are universal, but some depend on
whether the SoC is operating in nominal or in overdrive mode.
The imx8mp.dtsi currently assumes overdrive mode and configures some
clocks in accordance with this. Boards wishing to make use of nominal
mode will need to override some of the clock rates manually.
As operating the clocks outside of their allowed range can lead to
difficult to debug issues, it makes sense to register the maximum rates
allowed in the driver, so the CCF can take them into account.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-6-b7697dc2dcd0@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20150d499 ]
of_clk_get_hw_from_clkspec() checks all available clock-providers by
comparing their of nodes to the one from the clkspec. If no matching
clock provider is found, the function returns -EPROBE_DEFER to cause a
re-check at a later date. If a matching clock provider is found, an
authoritative answer can be retrieved from it whether the clock exists
or not.
This does not take into account that the clock-provider may never
appear, because it's node is disabled. This can happen when a clock is
optional, provided by a separate block which never gets enabled.
One example of this happening is the rk3588's VOP, which has optional
additional display clocks coming from PLLs inside the hdmiphy blocks.
These can be used for better rates, but the system will also work
without them.
The problem around that is described in the followups to[1]. As we
already know the of node of the presumed clock provider, add a check via
of_device_is_available() whether this is a "valid" device node. This
prevents eternal defer loops.
Link: https://lore.kernel.org/dri-devel/20250215-vop2-hdmi1-disp-modes-v1-3-81962a7151d6@collabora.com/ [1]
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250222223733.2990179-1-heiko@sntech.de
[sboyd@kernel.org: Reword commit text a bit]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f22a298d9 ]
According to the Rev.1.20 hardware manual for the RZ/Five SoC, the clock
source for HP is derived from PLL6 divided by 2. Correct the
implementation by configuring HP as a fixed clock source instead of a
MUX.
The `CPG_PL6_ETH_SSEL' register, which is available on the RZ/G2UL SoC,
is not present on the RZ/Five SoC, necessitating this change.
Fixes: 95d48d2703 ("clk: renesas: r9a07g043: Add support for RZ/Five SoC")
Cc: stable@vger.kernel.org
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250127173159.34572-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b86e5c03 ]
Refactor SD MUX driver to be able to reuse the same code on RZ/G3S.
RZ/G2{L,UL} has a limitation with regards to switching the clock source
for SD MUX (MUX clock source has to be switched to 266MHz before
switching b/w 533MHz and 400MHz). Rework the handling of this limitation
to use a clock notifier that is registered according to platform based
initialization data, so the SD MUX code can be reused on RZ/G3S.
As RZ/G2{L,UL} and RZ/G3S use different bits in different registers to
check if the clock switching has been done, this configuration (register
offset, register bits and bitfield width) is now passed through struct
cpg_core_clk::sconf (status configuration) from platform specific
initialization code.
Along with struct cpg_core_clk::sconf the mux table indices are also
passed from platform specific initialization code.
Also, mux flags are now passed to DEF_SD_MUX() as they will be used
later by RZ/G3S.
CPG_WEN_BIT macro has been introduced to select properly the WEN bit
of various registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 7f22a298d9 ("clk: renesas: r9a07g043: Fix HP clock source for RZ/Five")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97c1c4ccda ]
Add clk_hw_data struct that keeps the core part of the clock data.
sd_hw_data embeds a member of type struct clk_hw_data along with other
members (in the next commits). This commit prepares the field for
refactoring the SD MUX clock driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-9-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 7f22a298d9 ("clk: renesas: r9a07g043: Fix HP clock source for RZ/Five")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 897a3e34d6 ]
flag and mux_flags are intended to keep bit masks. Use u32 type for it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912045157.177966-15-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 7f22a298d9 ("clk: renesas: r9a07g043: Fix HP clock source for RZ/Five")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 25708f73ff upstream.
Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON.
Once the GDSCR moves to HW control, SW no longer can determine the state
of the GDSCR and setting the retain_ff bit could destroy all the register
contents we intended to save.
Therefore, move the retain_ff configuration before switching the GDSC to
HW trigger mode.
Cc: stable@vger.kernel.org
Fixes: 173722995c ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65a7334645 upstream.
Adding a new clause to this if/else I noticed the existing usage of
pm_genpd_add_subdomain() wasn't capturing and returning the result code.
pm_genpd_add_subdomain() returns an int and can fail. Capture that result
code and throw it up the call stack if something goes wrong.
Fixes: 1b771839de ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-2-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e6dfde439 upstream.
gdsc_unregister() should release subdomains in the reverse order to the
order in which those subdomains were added.
I've made this patch a standalone patch because it facilitates a subsequent
fix to stable.
Fixes: 1b771839de ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-1-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 000cbe3896 ]
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 5db3ae8b33 ("clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-1-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0079e77c08 ]
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-mmca-fix-v1-1-5af421f58b64@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7915d7d540 ]
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Fixes: 14c735c8e3 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-2-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8995f8f108 ]
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Fixes: 25e682a02d ("clk: meson: g12a: migrate to the new parent description method")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-cpua-parent-fix-v1-1-d8c0f41865fe@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9e60f1ffe ]
Correct the clk_ref_usb3otg parent to fix clock control for the usb3
controller on rk3328. Verified against the rk3328 trm, the rk3228h trm,
and the rk3328 usb3 phy clock map.
Fixes: fe3511ad8a ("clk: rockchip: add clock controller for rk3328")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250115012628.1035928-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc59600bc ]
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 9bb6cfc3c7 ("clk: qcom: Add Global Clock Controller driver for MSM8953")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-2-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d19d7345a7 ]
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061 ("drivers/clk: convert VL struct to struct_size")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38f7fe483 ]
gxbb_32k_clk_div sets CLK_DIVIDER_ROUND_CLOSEST in the init_data flag which
is incorrect. This is field is not where the divider flags belong.
Thankfully, CLK_DIVIDER_ROUND_CLOSEST maps to bit 4 which is an unused
clock flag, so there is no unintended consequence to this error.
Effectively, the clock has been used without CLK_DIVIDER_ROUND_CLOSEST
so far, so just drop it.
Fixes: 14c735c8e3 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-1-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c8746126a ]
Commit 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to
simplify driver") broke DT bindings as the highest index was reduced by
1 because the id count starts from 1 and not from 0.
Fix this, like for other drivers which had the same issue, by adding a
dummy clk at index 0.
Fixes: 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/b126a5577f3667ef19b1b5feea5e70174084fb03.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8eb1081d2 ]
In order to migrate some (few) old clock drivers to the common
mtk_clk_simple_probe() function, add dummy clock ops to be able
to insert a dummy clock with ID 0 at the beginning of the list.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230120092053.182923-8-angelogioacchino.delregno@collabora.com
Tested-by: Mingming Su <mingming.su@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 7c8746126a ("clk: mediatek: mt2701-vdec: fix conversion to mtk_clk_simple_probe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 89aa5925d2 upstream.
aggr_state and unit fields are u32. The result of their
multiplication may not fit in this type.
Add explicit casting to prevent overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 04053f4d23 ("clk: qcom: clk-rpmh: Add IPA clock support")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4cdb196f1 upstream.
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for the clock where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 837519775f ("clk: qcom: Add display clock controller driver for SM6350")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-2-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96fe1a7ee4 upstream.
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for two clocks where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-1-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33f1722eb8 upstream.
Commit c45ae598fc ("clk: qcom: support for alpha mode configuration")
added support for configuring alpha mode, but it seems that the feature
was never working in practice.
The value of the alpha_{en,mode}_mask members of the configuration gets
added to the value parameter passed to the regmap_update_bits() function,
however the same values are not getting applied to the bitmask. As the
result, the respective bits in the USER_CTL register are never modifed
which leads to improper configuration of several PLLs.
The following table shows the PLL configurations where the 'alpha_en_mask'
member is set and which are passed as a parameter for the
clk_alpha_pll_configure() function. In the table the 'expected rate' column
shows the rate the PLL should run at with the given configuration, and
the 'real rate' column shows the rate the PLL runs at actually. The real
rates has been verified on hardwareOn IPQ* platforms, on other platforms,
those are computed values only.
file pll expected rate real rate
dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz
dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz
gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz
gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz
gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz
gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz
gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz
gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz
gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz
gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz
gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz
gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz
gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz
gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz
gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz
As it can be seen from the above, there are several PLLs which are
configured incorrectly.
Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask'
values to the bitmask in order to configure the alpha mode correctly.
Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed
in the table above. Since the 'alpha_mode_mask' is not used by any driver
currently, that part of the change causes no functional changes.
Cc: stable@vger.kernel.org
Fixes: c45ae598fc ("clk: qcom: support for alpha mode configuration")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1641472004 upstream.
While testing the MMC nodes proposed in [1], it was noted that mmc0/1
would fail to initialize, with "mmc: fatal err update clk timeout" in
the kernel logs. A closer look at the clock definitions showed that the MMC
MPs had the "CLK_SET_RATE_NO_REPARENT" flag set. No reason was given for
adding this flag in the first place, and its original purpose is unknown,
but it doesn't seem to make sense and results in severe limitations to MMC
speeds. Thus, remove this flag from the 3 MMC MPs.
[1] https://msgid.link/20241024170540.2721307-10-masterr3c0rd@epochal.quest
Fixes: fb038ce4db ("clk: sunxi-ng: add support for the Allwinner A100 CCU")
Cc: stable@vger.kernel.org
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241109003739.3440904-1-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7f12857f0 ]
In wrpll_configure_for_rate() we try to determine the best PLL
configuration for a target rate. However, in the loop where we try
values of R, we should compare the derived `vco` with `target_vco_rate`.
However, we were in fact comparing it with `target_rate`, which is
actually after Q shift. This is incorrect, and sometimes can result in
suboptimal clock rates. Fix it.
Fixes: 7b9487a9a5 ("clk: analogbits: add Wide-Range PLL library")
Signed-off-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240830061639.2316-1-ganboing@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f760a4bb5e ]
Similar to the earlier fixes meant for sm8x50 and x1e platforms,
we have to stop using the shared clk ops for sdm845 QUPs as well.
As Stephen Boyd pointed out in earlier fixes, there wasn't a problem
to mark QUP clks shared until we started parking shared RCGs at clk
registration time in commit 01a0a6cc8c ("clk: qcom: Park shared RCGs
upon registration"). Parking at init is actually harmful to the UART
when earlycon is used. If the device is pumping out data while the
frequency changes and we see garbage on the serial console until the
driver can probe and actually set a proper frequency.
This patch reverts the QUP clk sharing ops part of commit 06391eddb6
("clk: qcom: Add Global Clock controller (GCC) driver for SDM845"), so
that the QUPs on sdm845 don't get parked during clk registration and
break UART operations.
Fixes: 01a0a6cc8c ("clk: qcom: Park shared RCGs upon registration")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20241209174912.2526928-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9b7c84d22 ]
The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled
first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register.
The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix
the clock tree and place the clkout1/2 under plln_sel instead of plain plln
to let the clock subsystem correctly control the bit 11 and enable the PLL
in case the CLKOUTn is supplied by PLL1/2/3.
Fixes: 43896f56b5 ("clk: imx8mp: add clkout1/2 support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c64ef7e485 ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one.
In order to keep backward compatibility and make sure old DTs still work
we check if clock-names is available or not. If it is, then we can
disambiguate between really having the AXI clock or a parent clock and
so we can enable the bus clock. If not, we fallback to what was done
before and don't explicitly enable the AXI bus clock.
Note that if clock-names is given, the axi clock must be the last one in
the phandle array (also enforced in the DT bindings) so that we can reuse
as much code as possible.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-2-bc5e0733ad76@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e81361f6cf ]
The scu clk_ops only inplements prepare() and unprepare() callback.
Saving the clock state during suspend by checking clk_hw_is_enabled()
is not safe as it's possible that some device drivers may only
disable the clocks without unprepare. Then the state retention will not
work for such clocks.
Fixing it by checking clk_hw_is_prepared() which is more reasonable
and safe.
Fixes: d0409631f4 ("clk: imx: scu: add suspend/resume support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-4-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff4279618f ]
To i.MX93 which features dual Cortex-A55 cores and DSU, when using
writel_relaxed to write value to PLL registers, the value might be
buffered. To make sure the value has been written into the hardware,
using readl to read back the register could achieve the goal.
current PLL power up flow can be simplified as below:
1. writel_relaxed to set the PLL POWERUP bit;
2. readl_poll_timeout to check the PLL lock bit:
a). timeout = ktime_add_us(ktime_get(), timeout_us);
b). readl the pll the lock reg;
c). check if the pll lock bit ready
d). check if timeout
But in some corner cases, both the write in step 1 and read in
step 2 will be blocked by other bus transaction in the SoC for a
long time, saying the value into real hardware is just before step b).
That means the timeout counting has begins for quite sometime since
step a), but value still not written into real hardware until bus
released just at a point before step b).
Then there maybe chances that the pll lock bit is not ready
when readl done but the timeout happens. readl_poll_timeout will
err return due to timeout. To avoid such unexpected failure,
read back the reg to make sure the write has been done in HW
reg.
So use readl after writel_relaxed to fix the issue.
Since we are here, to avoid udelay to run before writel_relaxed, use
readl before udelay.
Fixes: 1b26cb8a77 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-3-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 557be501c3 ]
Per i.MX93 Reference Mannual 22.4 Initialization information
1. Program appropriate value of DIV[ODIV], DIV[RDIV] and DIV[MFI]
as per Integer mode.
2. Wait for 5 μs.
3. Program the following field in CTRL register.
Set CTRL[POWERUP] to 1'b1 to enable PLL block.
4. Poll PLL_STATUS[PLL_LOCK] register, and wait till PLL_STATUS[PLL_LOCK]
is 1'b1 and pll_lock output signal is 1'b1.
5. Set CTRL[CLKMUX_EN] to 1'b1 to enable PLL output clock.
So move the CLKMUX_EN operation after PLL locked.
Fixes: 1b26cb8a77 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-2-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
