[ Upstream commit 00f452a1b0 ]
dma_map_XXX() can fail and should be tested for errors with
dma_mapping_error().
Fixes: b3a271a94d ("[SCSI] qla4xxx: support iscsiadm session mgmt")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250618071742.21822-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3b214719a ]
dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is
often ~0. The error value should be tested with dma_mapping_error() like
it was done in qla26xx_dport_diagnostics().
Fixes: 818c7f87a1 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 752eb816b5 upstream.
On a system with DRAM interleave enabled, out-of-bound access is
detected:
megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x46/0x4b
megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas]
megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas]
local_pci_probe+0x42/0x90
pci_device_probe+0xdc/0x290
really_probe+0xdb/0x340
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8b/0xe0
bus_add_driver+0x142/0x220
driver_register+0x72/0xd0
megasas_init+0xdf/0xff0 [megaraid_sas]
do_one_initcall+0x57/0x310
do_init_module+0x90/0x250
init_module_from_file+0x85/0xc0
idempotent_init_module+0x114/0x310
__x64_sys_finit_module+0x65/0xc0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it accordingly.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20250604042556.3731059-1-yu.c.chen@intel.com
Fixes: 8049da6f39 ("scsi: megaraid_sas: Use irq_set_affinity_and_hint()")
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a8a5a5dd0 ]
strsep() modifies the address of the pointer passed to it so that it no
longer points to the original address. This means kfree() gets the wrong
pointer.
Fix this by passing unmodified pointer returned from kstrdup() to
kfree().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://lore.kernel.org/r/20250612163616.24298-1-v.shevtsov@mt-integration.ru
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b2f966568f upstream.
Currently storvsc_timeout is only used in storvsc_sdev_configure(), and
5s and 10s are used elsewhere. It turns out that rarely the 5s is not
enough on Azure, so let's use storvsc_timeout everywhere.
In case a timeout happens and storvsc_channel_init() returns an error,
close the VMBus channel so that any host-to-guest messages in the
channel's ringbuffer, which might come late, can be safely ignored.
Add a "const" to storvsc_timeout.
Cc: stable@kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ae82eaf4ae ]
The strlcat() with FORTIFY support is triggering a panic because it
thinks the target buffer will overflow although the correct target
buffer size is passed in.
Anyway, instead of memset() with 0 followed by a strlcat(), just use
memcpy() and ensure that the resulting buffer is NULL terminated.
BIOSVersion is only used for the lpfc_printf_log() which expects a
properly terminated string.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20250409-fix-lpfc-bios-str-v1-1-05dac9e51e13@kernel.org
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05ae6c9c73 ]
In lpfc_check_sli_ndlp(), the get_job_els_rsp64_did remote_id assignment
does not apply for GEN_REQUEST64 commands as it only has meaning for a
ELS_REQUEST64 command. So, if (iocb->ndlp == ndlp) is false, we could
erroneously return the wrong value. Fix by replacing the fallthrough
statement with a break statement before the remote_id check.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250425194806.3585-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b17621366 ]
Correct the error handling goto labels used when host lookup fails in
various flashnode-related event handlers:
- iscsi_new_flashnode()
- iscsi_del_flashnode()
- iscsi_login_flashnode()
- iscsi_logout_flashnode()
- iscsi_logout_flashnode_sid()
scsi_host_put() is not required when shost is NULL, so jumping to the
correct label avoids unnecessary operations. These functions previously
jumped to the wrong goto label (put_host), which did not match the
intended cleanup logic.
Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to
ensure proper error handling. Also remove the unused put_host label
under iscsi_new_flashnode() as it is no longer needed.
No functional changes beyond accurate error path correction.
Fixes: c6a4bb2ef5 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4d953ca55 ]
In commit 21c7e97247 ("scsi: hisi_sas: Disable SATA disk phy for severe
I_T nexus reset failure"), if the softreset fails upon certain
conditions, the PHY connected to the disk is disabled directly. Manual
recovery is required, which is inconvenient for users in actual use.
In addition, SATA disks do not support simultaneous connection of multiple
hosts. Therefore, when multiple controllers are connected to a SATA disk
at the same time, the controller which is connected later failed to issue
an ATA softreset to the SATA disk. As a result, the PHY associated with
the disk is disabled and cannot be automatically recovered.
Now that, we will not focus on the execution result of softreset. No
matter whether the execution is successful or not, we will directly carry
out I_T_nexus_reset.
Fixes: 21c7e97247 ("scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failure")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://lore.kernel.org/r/20250414080845.1220997-4-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8720235d5 ]
Recent fixes to the randstruct GCC plugin allowed it to notice
that this structure is entirely function pointers and is therefore
subject to randomization, but doing so requires that it always use
designated initializers. Explicitly specify the "common" member as being
initialized. Silences:
drivers/scsi/qedf/qedf_main.c:702:9: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
702 | {
| ^
Fixes: 035f7f87b7 ("randstruct: Enable Clang support")
Link: https://lore.kernel.org/r/20250502224156.work.617-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7081dc75df ]
Some of the allowed operations put the tape into a known position to
continue operation assuming only the tape position has changed. But reset
sets partition, density and block size to drive default values. These
should be restored to the values before reset.
Normally the current block size and density are stored by the drive. If
the settings have been changed, the changed values have to be saved by the
driver across reset.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250120194925.44432-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0842902b3 ]
Fix smatch warning regarding missed calls to free_irq(). Free the phba IRQ
in the failed pci_irq_vector cases.
lpfc_init.c: lpfc_sli4_enable_msi() warn: 'phba->pcidev->irq' from
request_irq() not released.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250131000524.163662-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c3d809b7 ]
After a port swap between separate fabrics, there may be multiple nodes in
the vport's fc_nodes list with the same fabric well known address.
Duplication is temporary and eventually resolves itself after dev_loss_tmo
expires, but nameserver queries may still occur before dev_loss_tmo. This
possibly results in returning stale fabric ndlp objects. Fix by adding an
nlp_state check to ensure the ndlp search routine returns the correct newer
allocated ndlp fabric object.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250131000524.163662-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5612d6d51e ]
When an IOCTL times out and driver issues a target reset, if firmware
fails the task management elevate the recovery by issuing a diag reset to
controller.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Link: https://lore.kernel.org/r/1739410016-27503-5-git-send-email-shivasharan.srikanteshwara@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad77cebf97 ]
The SCSI ERASE command erases from the current position onwards. Don't
clear the position variables.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-3-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8db816c6f1 ]
In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did
not correctly implement it. The st driver first tries MODE SELECT with the
page format bit set to set the block descriptor. If not successful, the
non-page format is tried.
The test only tests the sense code and this triggers also from illegal
parameter in the parameter list. The test is limited to "old" devices and
made more strict to remove false alarms.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-4-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b7ee3b57 ]
Ensure event logs are only generated when the debug logging level
MPI3_DEBUG_EVENT is enabled. This prevents unnecessary logging.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250415101546.204018-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e8007fad54 upstream.
The REPORT ZONES buffer size is currently limited by the HBA's maximum
segment count to ensure the buffer can be mapped. However, the block
layer further limits the number of iovec entries to 1024 when allocating
a bio.
To avoid allocation of buffers too large to be mapped, further restrict
the maximum buffer size to BIO_MAX_INLINE_VECS.
Replace the UIO_MAXIOV symbolic name with the more contextually
appropriate BIO_MAX_INLINE_VECS.
Fixes: b091ac6168 ("sd_zbc: Fix report zones buffer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Siwinski <ssiwinski@atto.com>
Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 380b75d307 upstream.
vmbus_sendpacket_mpb_desc() is currently used only by the storvsc driver
and is hardcoded to create a single GPA range. To allow it to also be
used by the netvsc driver to create multiple GPA ranges, no longer
hardcode as having a single GPA range. Allow the calling driver to
specify the rangecount in the supplied descriptor.
Update the storvsc driver to reflect this new approach.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-2-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f7b705c238 ]
When a fatal error occurs, a phy down event may not be received to set
phy->phy_attached to zero.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daff37f00c ]
The hw port ID of phy may change when inserting disks in batches, causing
the port ID in hisi_sas_port and itct to be inconsistent with the hardware,
resulting in I/O errors. The solution is to set the device state to gone to
intercept I/O sent to the device, and then execute linkreset to discard and
find the disk to re-update its information.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250312095135.3048379-3-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54bebe4687 ]
Commands that have not been completed with scsi_done() do not clear the
SCMD_INITIALIZED flag and therefore will not be properly reinitialized.
Thus, the next time the scsi_cmnd structure is used, the command may
fail in scsi_cmd_runtime_exceeded() due to the old jiffies_at_alloc
value:
kernel: sd 16:0:1:84: [sdts] tag#405 timing out command, waited 720s
kernel: sd 16:0:1:84: [sdts] tag#405 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=66636s
Clear flags for commands that have not been completed by SCSI.
Fixes: 4abafdc436 ("block: remove the initialize_rq_fn blk_mq_ops method")
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20250324084933.15932-2-a.kovaleva@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aad9945623 upstream.
A firmware bug was observed where ATA VPD inquiry commands with a
zero-length data payload were not handled and failed with a non-standard
status code of 0xf0.
Avoid sending ATA VPD inquiry commands without data payload by setting
the device no_vpd_size flag to 1. In addition, if the firmware returns a
status code of 0xf0, set scsi_cmnd->result to CHECK_CONDITION to
facilitate proper error handling.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250402193735.5098-1-chandrakanth.patil@broadcom.com
Tested-by: Ryan Lahfa <ryan@lahfa.xyz>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 72eea84a10 ]
Add goto to ensure scsi_host_put() is called in all error paths of
iscsi_set_host_param() function. This fixes a potential memory leak when
strlen() check fails.
Fixes: ce51c81700 ("scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250318094344.91776-1-linmq006@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aa580cd92 ]
when a SATA disk is directly connected the SAS controller determines the
disk to which I/Os are delivered based on the port ID in the DQ entry.
When many phys are disconnected and reconnect, the port ID of phys were
changed and used by other link, resulting in I/O being sent to incorrect
disk. Data inconsistency on the SATA disk may occur during I/O retries
using the old port ID. So enable force phy, then force the command to be
executed in a certain phy, and if the actual phy ID of the port does not
match the phy configured in the command, the chip will stop delivering the
I/O to disk.
Fixes: ce60689e12 ("scsi: hisi_sas: add v3 code to send ATA frame")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250312095135.3048379-2-yangxingui@huawei.com
Reviewed-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5233e3235d ]
A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20250125095033.26188-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5363ee9d11 ]
Filesystems can write to disk from page reclaim with __GFP_FS
set. Marc found a case where scsi_realloc_sdev_budget_map() ends up in
page reclaim with GFP_KERNEL, where it could try to take filesystem
locks again, leading to a deadlock.
WARNING: possible circular locking dependency detected
6.13.0 #1 Not tainted
------------------------------------------------------
kswapd0/70 is trying to acquire lock:
ffff8881025d5d78 (&q->q_usage_counter(io)){++++}-{0:0}, at: blk_mq_submit_bio+0x461/0x6e0
but task is already holding lock:
ffffffff81ef5f40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x9f/0x760
The full lockdep splat can be found in Marc's report:
https://lkml.org/lkml/2025/1/24/1101
Avoid the potential deadlock by doing the allocation with GFP_NOIO, which
prevents both filesystem and block layer recursion.
Reported-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250129104525.0ae8421e@fangorn
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0e881c0a4b upstream.
The variable phba->fcf.fcf_flag is often protected by the lock
phba->hbalock() when is accessed. Here is an example in
lpfc_unregister_fcf_rescan():
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag |= FCF_INIT_DISC;
spin_unlock_irq(&phba->hbalock);
However, in the same function, phba->fcf.fcf_flag is assigned with 0
without holding the lock, and thus can cause a data race:
phba->fcf.fcf_flag = 0;
To fix this possible data race, a lock and unlock pair is added when
accessing the variable phba->fcf.fcf_flag.
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/20230630024748.1035993-1-islituo@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Wenshan Lan <jetlan9@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dce5c4afd0 ]
After commit 1bad6c4a57 ("scsi: zero per-cmd private driver data for each
MQ I/O"), the xen-scsifront/virtio_scsi/snic drivers all removed code that
explicitly zeroed driver-private command data.
In combination with commit 464a00c9e0 ("scsi: core: Kill DRIVER_SENSE"),
after virtio_scsi performs a capacity expansion, the first request will
return a unit attention to indicate that the capacity has changed. And then
the original command is retried. As driver-private command data was not
cleared, the request would return UA again and eventually time out and fail.
Zero driver-private command data when a request is retried.
Fixes: f7de50da14 ("scsi: xen-scsifront: Remove code that zeroes driver-private command data")
Fixes: c2bb87318b ("scsi: virtio_scsi: Remove code that zeroes driver-private command data")
Fixes: c3006a9264 ("scsi: snic: Remove code that zeroes driver-private command data")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250217021628.2929248-1-yebin@huaweicloud.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ff7c383b8 ]
Fail I/Os instead of retry to prevent user space processes from being
blocked on the I/O completion for several minutes.
Retrying I/Os during "depopulation in progress" or "depopulation restore in
progress" results in a continuous retry loop until the depopulation
completes or until the I/O retry loop is aborted due to a timeout by the
scsi_cmd_runtime_exceeced().
Depopulation is slow and can take 24+ hours to complete on 20+ TB HDDs.
Most I/Os in the depopulation retry loop end up taking several minutes
before returning the failure to user space.
Cc: stable@vger.kernel.org # 4.18.x: 2bbeb8d scsi: core: Handle depopulation and restoration in progress
Cc: stable@vger.kernel.org # 4.18.x
Fixes: e37c7d9a03 ("scsi: core: sanitize++ in progress")
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20250131184408.859579-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bbeb8d124 ]
The default handling of the NOT READY sense key is to wait for the device
to become ready. The "wait" is assumed to be relatively short. However
there is a sub-class of NOT READY that have the "... in progress" phrase in
their additional sense code and these can take much longer. Following on
from commit 505aa4b6a8 ("scsi: sd: Defer spinning up drive while SANITIZE
is in progress") we now have element depopulation and restoration that can
take a long time. For example, over 24 hours for a 20 TB, 7200 rpm hard
disk to depopulate 1 of its 20 elements.
Add handling of ASC/ASCQ: 0x4,0x24 (depopulation in progress)
and ASC/ASCQ: 0x4,0x25 (depopulation restoration in progress)
to sd.c . The scsi_lib.c has incomplete handling of these
two messages, so complete it.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20231015050650.131145-1-dgilbert@interlog.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 9ff7c383b8 ("scsi: core: Do not retry I/Os during depopulation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 87c4b5e8a6 upstream.
In StorVSC, payload->range.len is used to indicate if this SCSI command
carries payload. This data is allocated as part of the private driver data
by the upper layer and may get passed to lower driver uninitialized.
For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
REQUEST_SENSE while reusing the buffer from a failed command. The private
data section may have stale data from the previous command.
If the SCSI command doesn't carry payload, the driver may use this value as
is for communicating with host, resulting in possible corruption.
Fix this by always initializing this value.
Fixes: be0cf6ca30 ("scsi: storvsc: Set the tablesize based on the information given by the host")
Cc: stable@kernel.org
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 841df27d61 upstream.
Currently FCE Tracing is enabled to log additional ELS events. Instead,
user will enable or disable this feature through debugfs.
Modify existing DFS knob to allow user to enable or disable this
feature.
echo [1 | 0] > /sys/kernel/debug/qla2xxx/qla2xxx_??/fce
cat /sys/kernel/debug/qla2xxx/qla2xxx_??/fce
Cc: stable@vger.kernel.org
Fixes: df613b9607 ("[SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support.")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad7c3c0cb8 ]
Currently, the code does:
if (x == 0) {
x &= ~0x3;
x |= 0x1;
}
Zeroing bits 0 and 1 of a variable that is 0 is not necessary. So directly
set the variable to 1.
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20241212221817.78940-2-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d2138eab8c upstream.
If there's a persistent error in the hypervisor, the SCSI warning for
failed I/O can flood the kernel log and max out CPU utilization,
preventing troubleshooting from the VM side. Ratelimit the warning so
it doesn't DoS the VM.
Closes: https://github.com/microsoft/WSL/issues/9173
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250107-eahariha-ratelimit-storvsc-v1-1-7fc193d1f2b0@linux.microsoft.com
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63ca02221c ]
The ISCSI_UEVENT_GET_HOST_STATS request is already handled in
iscsi_get_host_stats(). This fix ensures that redundant responses are
skipped in iscsi_if_rx().
- On success: send reply and stats from iscsi_get_host_stats()
within if_recv_msg().
- On error: fall through.
Signed-off-by: Xiang Zhang <hawkxiang.cpp@gmail.com>
Link: https://lore.kernel.org/r/20250107022432.65390-1-hawkxiang.cpp@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f10593ad9b upstream.
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30
kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912
sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407
In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is
called before releasing the open_rel_lock mutex. The kref_put() call may
decrement the reference count of sfp to zero, triggering its cleanup
through sg_remove_sfp(). This cleanup includes scheduling deferred work
via sg_remove_sfp_usercontext(), which ultimately frees sfp.
After kref_put(), sg_release() continues to unlock open_rel_lock and may
reference sfp or sdp. If sfp has already been freed, this results in a
slab-use-after-free error.
Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the
open_rel_lock mutex. This ensures:
- No references to sfp or sdp occur after the reference count is
decremented.
- Cleanup functions such as sg_remove_sfp() and
sg_remove_sfp_usercontext() can safely execute without impacting the
mutex handling in sg_release().
The fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures proper
sequencing of resource cleanup and mutex operations, eliminating the
risk of use-after-free errors in sg_release().
Reported-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7efb5850a17ba6ce098b
Tested-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com
Fixes: cc833acbee ("sg: O_EXCL and other lock handling")
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241120125944.88095-1-surajsonawane0215@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b1aee7f034 ]
This partially reverts commit 812fe6420a ("scsi: storvsc: Handle
additional SRB status values").
HyperV does not support MAINTENANCE_IN resulting in FC passthrough
returning the SRB_STATUS_DATA_OVERRUN value. Now that
SRB_STATUS_DATA_OVERRUN is treated as an error, multipath ALUA paths go
into a faulty state as multipath ALUA submits RTPG commands via
MAINTENANCE_IN.
[ 3.215560] hv_storvsc 1d69d403-9692-4460-89f9-a8cbcc0f94f3:
tag#230 cmd 0xa3 status: scsi 0x0 srb 0x12 hv 0xc0000001
[ 3.215572] scsi 1:0:0:32: alua: rtpg failed, result 458752
Make MAINTENANCE_IN return success to avoid the error path as is
currently done with INQUIRY and MODE_SENSE.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Link: https://lore.kernel.org/r/20241127181324.3318443-1-cavery@redhat.com
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f5eb062e8 ]
Issue a Diag-Reset when the "Doorbell-In-Use" bit is set during the
driver load/initialization.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241110173341.11595-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c064de86d2 ]
Fix the hardware revision numbering for Qlogic ISP1020/1040 boards. HWMASK
suggests that the revision number only needs four bits, this is consistent
with how NetBSD does things in their ISP driver. Verified on a IPS1040B
which is seen as rev 5 not as BIT_4.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20241113225636.2276-1-linmag7@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b120edb37 ]
Most drives rewind the tape when the device is reset. Reading and writing
are not allowed until something is done to make the tape position match the
user's expectation (e.g., rewind the tape). Add MTIOCGET and MTLOAD to
operations allowed after reset. MTIOCGET is modified to not touch the tape
if pos_unknown is non-zero. The tape location is known after MTLOAD.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219419#c14
Link: https://lore.kernel.org/r/20241106095723.63254-3-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 833c70e212 upstream.
Firmware supports multiple sg_cnt for request and response for CT
commands, so remove the redundant check. A check is there where sg_cnt
for request and response should be same. This is not required as driver
and FW have code to handle multiple and different sg_cnt on request and
response.
Cc: stable@vger.kernel.org
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07c903db0a upstream.
System crash is observed with stack trace warning of use after
free. There are 2 signals to tell dpc_thread to terminate (UNLOADING
flag and kthread_stop).
On setting the UNLOADING flag when dpc_thread happens to run at the time
and sees the flag, this causes dpc_thread to exit and clean up
itself. When kthread_stop is called for final cleanup, this causes use
after free.
Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop
as the main signal to exit dpc_thread.
[596663.812935] kernel BUG at mm/slub.c:294!
[596663.812950] invalid opcode: 0000 [#1] SMP PTI
[596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1
[596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012
[596663.812974] RIP: 0010:__slab_free+0x17d/0x360
...
[596663.813008] Call Trace:
[596663.813022] ? __dentry_kill+0x121/0x170
[596663.813030] ? _cond_resched+0x15/0x30
[596663.813034] ? _cond_resched+0x15/0x30
[596663.813039] ? wait_for_completion+0x35/0x190
[596663.813048] ? try_to_wake_up+0x63/0x540
[596663.813055] free_task+0x5a/0x60
[596663.813061] kthread_stop+0xf3/0x100
[596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4e268f898 upstream.
The fc_function_template for vports was missing the
.show_host_supported_speeds. The base port had the same.
Add .show_host_supported_speeds to the vport template as well.
Cc: stable@vger.kernel.org
Fixes: 2c3dfe3f6a ("[SCSI] qla2xxx: add support for NPIV")
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4812b7796c upstream.
NVMe controller fails to send connect command due to failure to locate
hw context buffer for NVMe queue 0 (blk_mq_hw_ctx, hctx_idx=0). The
cause of the issue is NPIV host did not initialize the vha->irq_offset
field. This field is given to blk-mq (blk_mq_pci_map_queues) to help
locate the beginning of IO Queues which in turn help locate NVMe queue
0.
Initialize this field to allow NVMe to work properly with NPIV host.
kernel: nvme nvme5: Connect command failed, errno: -18
kernel: nvme nvme5: qid 0: secure concatenation is not supported
kernel: nvme nvme5: NVME-FC{5}: create_assoc failed, assoc_id 2e9100 ret 401
kernel: nvme nvme5: NVME-FC{5}: reset: Reconnect attempt failed (401)
kernel: nvme nvme5: NVME-FC{5}: Reconnect attempt in 2 seconds
Cc: stable@vger.kernel.org
Fixes: f0783d43dd ("scsi: qla2xxx: Use correct number of vectors for online CPUs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
