[ Upstream commit bf2ffc4d14 ]
Modify the driver to post 3 fewer buffers than the maximum rx buffers
(64) allowed for the firmware. This change mitigates a hardware issue
causing a race condition in the firmware, improving stability and data
handling.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dd711102c ]
This change addresses latency issues observed in HID use cases where
events arrive in bursts. By increasing the Rx descriptor count to 64,
the firmware can handle bursty data more effectively, reducing latency
and preventing buffer overflows.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3aa1dc3c90 ]
Since the size of struct btintel_dsbr is already known, we can just
start there instead of querying the EFI variable size. If the final
result doesn't match what we expect also fail. This fixes a stack buffer
overflow when the EFI variable is larger than struct btintel_dsbr.
Reported-by: zepta <z3ptaa@gmail.com>
Closes: https://lore.kernel.org/all/CAPBS6KoaWV9=dtjTESZiU6KK__OZX0KpDk-=JEH8jCHFLUYv3Q@mail.gmail.com
Fixes: eb9e749c01 ("Bluetooth: btintel: Allow configuring drive strength of BRI")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0fb410c914 upstream.
Commit 3d05fc8223 ("Bluetooth: qca: set power_ctrl_enabled on NULL
returned by gpiod_get_optional()") accidentally changed the prevous
behavior where power control would be disabled without the BT_EN GPIO
only on QCA_WCN6750 and QCA_WCN6855 while also getting the error check
wrong. We should treat every IS_ERR() return value from
devm_gpiod_get_optional() as a reason to bail-out while we should only
set power_ctrl_enabled to false on the two models mentioned above. While
at it: use dev_err_probe() to save a LOC.
Cc: stable@vger.kernel.org
Fixes: 3d05fc8223 ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Hsin-chen Chuang <chharry@chromium.org>
Reviewed-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b6d58bc6e upstream.
To prevent Bluetooth SDIO card from be physically removed suddenly,
driver needs to ensure btmtksdio_close is called before
btmtksdio_remove to disable interrupts and txrx workqueue.
Fixes: 6ac4233afb ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07e90048e3 upstream.
Check BTMTKSDIO_FUNC_ENABLED flag before doing close to prevent
btmtksdio_close been called twice.
Fixes: 6ac4233afb ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4bcb0c7dc2 ]
Use skb_pull() and skb_pull_data() to safely parse QCA dump packets.
This avoids direct pointer math on skb->data, which could lead to
invalid access if the packet is shorter than expected.
Fixes: 20981ce2d5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ac4233afb ]
Ensure interrupts are not re-enabled when the IRQ handler has already been
removed. This prevents unexpected IRQ handler execution due to stale or
unhandled interrupts.
Modify btmtksdio_txrx_work to check if bdev->func->irq_handler exists
before calling sdio_writel to enable interrupts.
Co-developed-by: Pedro Tsai <pedro.tsai@mediatek.com>
Signed-off-by: Pedro Tsai <pedro.tsai@mediatek.com>
Co-developed-by: Felix Freimann <felix.freimann@mediatek.com>
Signed-off-by: Felix Freimann <felix.freimann@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 33634e2ab7 upstream.
Remove the resetting step before downloading the fw, as it may cause
other usb devices to fail to initialise when connected during boot
on kernels 6.11 and newer.
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: "Geoffrey D. Bennett" <g@b4.vu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a720861076 upstream.
Remove resetting mt7921 before downloading the fw, as it may cause
command timeout when performing the reset.
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: "Geoffrey D. Bennett" <g@b4.vu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c7664957e ]
Due to a hardware issue, there is a possibility that the driver may miss
an MSIx interrupt on the RX/TX data path. Since the TX and RX paths are
independent, when a TX MSIx interrupt occurs, the driver can check the
RX queue for any pending data and process it if present. The same
approach applies to the RX path.
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0317b033ab ]
A NULL pointer dereference can occur in skb_dequeue() when processing a
QCA firmware crash dump on WCN7851 (0489:e0f3).
[ 93.672166] Bluetooth: hci0: ACL memdump size(589824)
[ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth]
[ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80
The issue stems from handle_dump_pkt_qca() returning 0 even when a dump
packet is successfully processed. This is because it incorrectly
forwards the return value of hci_devcd_init() (which returns 0 on
success). As a result, the caller (btusb_recv_acl_qca() or
btusb_recv_evt_qca()) assumes the packet was not handled and passes it
to hci_recv_frame(), leading to premature kfree() of the skb.
Later, hci_devcd_rx() attempts to dequeue the same skb from the dump
queue, resulting in a NULL pointer dereference.
Fix this by:
1. Making handle_dump_pkt_qca() return 0 on success and negative errno
on failure, consistent with kernel conventions.
2. Splitting dump packet detection into separate functions for ACL
and event packets for better structure and readability.
This ensures dump packets are properly identified and consumed, avoiding
double handling and preventing NULL pointer access.
Fixes: 20981ce2d5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1af1f02ef ]
Reuse the skb buffer provided by the PCIe driver to pass it onto the
stack, instead of copying it to a new skb.
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dd1c1eee3 ]
Add 13 USB device IDs for Qualcomm WCN785x, and these IDs are
extracted from Windows driver inf file for various types of
WoS (Windows on Snapdragon) laptop.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 875db86e1e upstream.
Avoid double-copying of string literals. Use a "const char *" for each
string instead of copying from .rodata into stack and then into the skb.
We can go directly from .rodata to the skb.
This also works around a Clang bug (that has since been fixed[1]).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401250927.1poZERd6-lkp@intel.com/
Fixes: ab4e4380d4 ("Bluetooth: Add vhci devcoredump support")
Link: ea2e66aa8b [1]
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 324dddea32 ]
The btrtl_initialize() function checks that rtl_load_file() either
had an error or it loaded a zero length file. However, if it loaded
a zero length file then the error code is not set correctly. It
results in an error pointer vs NULL bug, followed by a NULL pointer
dereference. This was detected by Smatch:
drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR'
Fixes: 26503ad25d ("Bluetooth: btrtl: split the device initialization into smaller parts")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5df5dafc17 upstream.
Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'.
Possible race is when someone calls 'hci_tty_uart_close()' after this bit
is set, but 'hci_uart_register_dev()' wasn't done. This leads to access
to uninitialized fields. To fix it let's set this bit after device was
registered (as before patch c411c62cc133) and to fix previous problem let's
add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to
perform power up without original bit set (pls see commit c411c62cc133).
Crash backtrace from syzbot report:
RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline]
RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936
Call Trace:
<TASK>
skb_queue_purge include/linux/skbuff.h:3364 [inline]
mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100
hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557
tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline]
tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613
tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781
tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690
tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861
__fput+0x86/0x2a0 fs/file_table.c:450
task_work_run+0x82/0xb0 kernel/task_work.c:239
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218
do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/
Fixes: 366ceff495 ("Bluetooth: hci_uart: fix race during initialization")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1cc41b5092 ]
The WCN399x code has two separate cases for loading the NVM data. In
preparation to adding support for WCN3950, which also requires similar
quirk, split the "variant" to be specified explicitly and merge two
snprintfs into a single one.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 852cfdc7a5 ]
Older boards are having entry "enable-gpios" in dts, we can safely assume
latest boards which are supporting PMU node enrty will support power
sequencer.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 366ceff495 ]
'hci_register_dev()' calls power up function, which is executed by
kworker - 'hci_power_on()'. This function does access to bluetooth chip
using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'.
Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and
if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after
'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will
be executed before setting this bit. In that case HCI init logic fails.
Patch moves setting of 'HCI_UART_PROTO_READY' before calling function
'hci_uart_register_dev()'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbf85b9cb8 ]
Initialize .owner field of force_poll_sync_fops to THIS_MODULE in order to
prevent btusb from being unloaded while its operations are in use.
Fixes: 800fe5ec30 ("Bluetooth: btusb: Add support for queuing during polling interval")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2fad24894 ]
For WCN6855, board ID specific NVM needs to be downloaded once board ID
is available, but the default NVM is always downloaded currently.
The wrong NVM causes poor RF performance, and effects user experience
for several types of laptop with WCN6855 on the market.
Fix by downloading board ID specific NVM if board ID is available.
Fixes: 095327fede ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855")
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c5a468c6 ]
Different connectivity boards may be attached to the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.
Therefore, in the firmware-name property, if the NVM file has an
extension, the NVM file will be used. Otherwise, the system will first
try the .bNN (board ID) file, and if that fails, it will fall back to
the .bin file.
Possible configurations:
firmware-name = "QCA6698/hpnv21";
firmware-name = "QCA6698/hpnv21.bin";
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: a2fad24894 ("Bluetooth: qca: Fix poor RF performance for WCN6855")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 872274b992 ]
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f0 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7de119bb79 ]
This fixes a regression caused by previous commit for fixing truncated
ACL data, which is causing some intermittent glitches when running two
A2DP streams.
serdev_device_write_buf() is the root cause of the glitch, which is
reverted, and the TX work will continue to write until the queue is empty.
This change fixes both issues. No A2DP streaming glitches or truncated
ACL data issue observed.
Fixes: 8023dd2204 ("Bluetooth: btnxpuart: Fix driver sending truncated data")
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9087e8288 ]
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking.
Fixes: ceac1cb025 ("Bluetooth: btusb: mediatek: add ISO data transmission functions")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c15082f35 ]
If insert an USB dongle which chip is not maintained in ic_id_table, it
will hit the NULL point accessed. Add a null point check to avoid the
Kernel Oops.
Fixes: b39910bb54 ("Bluetooth: Populate hci_set_hw_info for Intel and Realtek")
Reviewed-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b88655bc65 ]
devm_kstrdup() can return a NULL pointer on failure,but this
returned value in btbcm_get_board_name() is not checked.
Add NULL check in btbcm_get_board_name(), to handle kernel NULL
pointer dereference error.
Fixes: f9183eaad9 ("Bluetooth: btbcm: Use devm_kstrdup()")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67dba2c28f ]
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.
Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
(-110)
Fixes: 5c5e8c52e3 ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8023dd2204 ]
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit defc33b554 upstream.
Change conditions for Bluetooth driver claiming and releasing usb
ISO interface for MediaTek ISO data transmission.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Fedor Pchelkin <boddah8794@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 489304e670 upstream.
MediaTek claim an special usb intr interface for ISO data transmission.
The interface need to be released before unregistering hci device when
usb disconnect. Removing BT usb dongle without properly releasing the
interface may cause Kernel panic while unregister hci device.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Fedor Pchelkin <boddah8794@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cea1805f16 upstream.
Add disconnect callback function in btusb_disconnect which is reserved
for vendor specific usage before deregister hci in btusb_disconnect.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Fedor Pchelkin <boddah8794@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad0c6f603b upstream.
Move MediaTek Bluetooth power off command before releasing
usb ISO interface.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Fedor Pchelkin <boddah8794@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b548f5e945 ]
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.
Fixes: 0b70151328 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
