commit 0981213407 upstream.
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 903cc7096d upstream.
Specify the properties which are essential and which are not for the
Tegra I2C driver to function correctly. This was not added correctly when
the TXT binding was converted to yaml. All the existing DT nodes have
these properties already and hence this does not break the ABI.
dmas and dma-names which were specified as a must in the TXT binding
is now made optional since the driver can work in PIO mode if dmas are
missing.
Fixes: f10a9b722f ("dt-bindings: i2c: tegra: Convert to json-schema”)
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi@smida.it>
Link: https://lore.kernel.org/r/20250603153022.39434-1-akhilrajeev@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cfdd7752b upstream.
Some of the regulators on the MT6357 PMIC currently reference the
fixed-regulator dt-binding, which enforces the presence of a
regulator-fixed compatible. However since all regulators on the MT6357
PMIC are handled by a single mt6357-regulator driver, probed through
MFD, the compatibles don't serve any purpose. In fact they cause
failures in the DT kselftest since they aren't probed by the fixed
regulator driver as would be expected. Furthermore this is the only
dt-binding in this family like this: mt6359-regulator and
mt6358-regulator don't require those compatibles.
Commit d77e89b7b0 ("arm64: dts: mediatek: mt6357: Drop regulator-fixed
compatibles") removed the compatibles from Devicetree, but missed
updating the binding, which still requires them, introducing dt-binding
errors. Remove the compatible requirement by referencing the plain
regulator dt-binding instead to fix the dt-binding errors.
Fixes: d77e89b7b0 ("arm64: dts: mediatek: mt6357: Drop regulator-fixed compatibles")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250514-mt6357-regulator-fixed-compatibles-removal-bindings-v1-1-2421e9cc6cc7@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9baa27a2e9 ]
Liontron is a company based in Shenzen, China, making industrial
development boards and embedded computers, mostly using Rockchip and
Allwinner SoCs.
Add their name to the list of vendors.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250505164729.18175-2-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5b3a91b207 upstream.
The ticket TKT0676370 shows the description of TX_VBOOST_LVL is wrong in
register PHY_CTRL3 bit[31:29].
011: Corresponds to a launch amplitude of 1.12 V.
010: Corresponds to a launch amplitude of 1.04 V.
000: Corresponds to a launch amplitude of 0.88 V.
After updated:
011: Corresponds to a launch amplitude of 0.844 V.
100: Corresponds to a launch amplitude of 1.008 V.
101: Corresponds to a launch amplitude of 1.156 V.
This will correct it accordingly.
Fixes: b2e75563dc ("dt-bindings: phy: imx8mq-usb: add phy tuning properties")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250430094502.2723983-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ad4b5a7de upstream.
The Cypress HX3 hubs use different default PID value depending
on the variant. Update compatibles list.
Becasuse all hub variants use the same driver data, allow the
dt node to have two compatibles: leftmost which matches the HW
exactly, and the second one as fallback.
Fixes: 1eca51f58a ("dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family")
Cc: stable@vger.kernel.org # 6.6
Cc: stable@vger.kernel.org # Backport of the patch ("dt-bindings: usb: usb-device: relax compatible pattern to a contains") from list: https://lore.kernel.org/linux-usb/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de/
Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-2-4a76a474a010@thaumatec.com
[taken with Greg's blessing]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e4e454223 upstream.
Binding listed variable number of IO addresses without defining them,
however example DTS code, all in-tree DTS and Linux kernel driver
mention only one address space, so drop the second to make binding
precise and correctly describe the hardware.
Fixes: 6c781a3513 ("dt-bindings: arm: Add CoreSight TPDM hardware")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250226112914.94361-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d72deaf05a upstream.
Binding listed variable number of IO addresses without defining them,
however example DTS code, all in-tree DTS and Linux kernel driver
mention only one address space, so drop the second to make binding
precise and correctly describe the hardware.
Fixes: a8fbe1442c ("dt-bindings: arm: Adds CoreSight TPDA hardware definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250226112914.94361-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a544a39e0 upstream.
The MIPID02 can use up to 2 data lanes which leads to having a maximum
item number of 3 for the lane-polarities since this also contains the
clock lane.
CC: stable@vger.kernel.org
Fixes: c2741cbe7f ("dt-bindings: media: st,stmipid02: Convert the text bindings to YAML")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5f0d2de417 ]
GOcontroll produces embedded linux systems and IO modules to use in
these systems, add its prefix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-2-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6856edf7ea ]
The sense resistor used for measuring currents is typically some tens of
milli Ohms. It has accidentally been documented to be tens of mega Ohms.
Fix the size of this resistor and a few copy-paste errors while at it.
Drop the unsuitable 'rohm,charger-sense-resistor-ohms' property (which
can't represent resistors smaller than one Ohm), and introduce a new
'rohm,charger-sense-resistor-micro-ohms' property with appropriate
minimum, maximum and default values instead.
Fixes: 4238dc1e64 ("dt_bindings: mfd: Add ROHM BD71815 PMIC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0efd8e9de0ae8d62ee4c6b78cc565b04007a245d.1731430700.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08242719a8 ]
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It should not have been used for new
submissions such as the MT6315.
Drop the property from the MT6315 regulator binding and its examples.
Fixes: 977fb5b584 ("regulator: document binding for MT6315 regulator")
Fixes: 6d435a94ba ("regulator: mt6315: Enforce regulator-compatible, not name")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241211052427.4178367-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 609bc99a44 ]
The LED color definitions have always been in
include/dt-bindings/leds/common.h in upstream.
Fixes: 5c7f8ffe74 ("dt: bindings: Add multicolor class dt bindings documention")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a3c7ea92e90b77032f2e480d46418b087709286d.1731588129.git.geert+renesas@glider.be
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2b8e93ec0 ]
The term "slot ID" has nothing to do with the SDIO function number
which is specified in the reg property of the subnodes, rephrase
the description to be more accurate.
Fixes: f9b7989859 ("dt-bindings: mmc: Add YAML schemas for the generic MMC options")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241128-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson-mx-sdio-v4-1-11d9f9200a59@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1aa772be04 upstream.
Add fsl,pps-channel property to select where to connect the PPS signal.
This depends on the internal SoC routing and on the board, for example
on the i.MX8 SoC it can be connected to an external pin (using channel 1)
or to internal eDMA as DMA request (channel 0).
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47f3f5a82a ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one and add clock-names to differentiate between parent clocks and
the bus clock.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-1-bc5e0733ad76@analog.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4649cbd97f ]
Some fix and updates in the following items:
1. examples:
Update generic node name to 'audio-codec' to comply with the
coming change in 'mt6359.dtsi'. This change is necessary to fix the
dtbs_check error:
pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
2. mediatek,dmic-mode:
After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
discovered that the definitions of 'two wires' and 'one wire' are
inverted compared to the DT schema.
For example, the following boards using MT6359 PMIC:
- mt8192-asurada.dtsi
- mt8195-cherry.dtsi
These boards use the same definitions of 'dmic-mode' as other boards
using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
in the device trees.
Upon examining the code in [1] and [2], it was confirmed that the
definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
"MT6358 PMIC". Therefore, the DT Schema should be correct as is.
References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515
Fixes: 539237d1c6 ("dt-bindings: mediatek: mt6359: add codec document")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8380dbf1b9 ]
Combinations of "tx" alone, "rx" alone and "tx", "rx" together are
supposedly valid (see link below), which is not the case today as "rx"
alone is not accepted by the current binding.
Let's rework the two interrupt properties to expose all correct
possibilities.
Cc: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/linux-sound/20241003102552.2c11840e@xps-13/T/#m277fce1d49c50d94e071f7890aed472fa2c64052
Fixes: 8be90641a0 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241003083611.461894-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17d8adc4cd ]
My understanding of the interrupts property is that it can either be:
1/ - TX
2/ - TX
- RX
3/ - Common/combined.
There are very little chances that either:
- TX
- Common/combined
or even
- TX
- RX
- Common/combined
could be a thing.
Looking at the interrupt-names definition (which uses oneOf instead of
anyOf), it makes indeed little sense to use anyOf in the interrupts
definition. I believe this is just a mistake, hence let's fix it.
Fixes: 8be90641a0 ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6929644c1 ]
Add missing reg minItems as based on current binding document
only ethernet MAC IO space is a supported configuration.
There is a bug in schema, current examples contain 64-bit
addressing as well as 32-bit addressing. The schema validation
does pass incidentally considering one 64-bit reg address as
two 32-bit reg address entries. If we change axi_ethernet_eth1
example node reg addressing to 32-bit schema validation reports:
Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb:
ethernet@40000000: reg: [[1073741824, 262144]] is too short
To fix it add missing reg minItems constraints and to make things clearer
stick to 32-bit addressing in examples.
Fixes: cbb1ca6d5f ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml")
Signed-off-by: Ravikanth Tuniki <ravikanth.tuniki@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1727723615-2109795-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12736adc43 ]
The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.
Fixes: ef89fd56bd ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-2-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7668ac67b ]
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97f ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240806053016.6401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 97e32381d0 upstream.
Linux kernel uses thermal zone node name during registering thermal
zones and has a hard-coded limit of 20 characters, including terminating
NUL byte. The bindings expect node names to finish with '-thermal'
which is eight bytes long, thus we have only 11 characters for the reset
of the node name (thus 10 for the pattern after leading fixed character).
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_JsqKogbT_4DPd1n94xqeHaU_J8ve5K09WOyVsRX3jxxUW3w@mail.gmail.com/
Fixes: 1202a442a3 ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702145248.47184-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c8cfd592b upstream.
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 1acd4577a6 ("dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4e001ffec upstream.
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 7ea75dd386 ("dt-bindings: i2c: convert i2c-at91 to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 19fb11d722 ]
Add a required clock property as we can't access the device registers if
the AXI bus clock is not properly enabled.
Note this clock is a very fundamental one that is typically enabled
pretty early during boot. Independently of that, we should really rely on
it to be enabled.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: 96553a44e9 ("dt-bindings: iio: adc: add bindings doc for AXI ADC driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240426-ad9467-new-features-v2-3-6361fc3ba1cc@analog.com
Cc: <Stable@ver.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a032b921bd ]
'adi,adc-dev' is now deprecated and must not be used anymore. Hence,
also remove it from being required.
The reason why it's being deprecated is because the axi-adc CORE is now
an IIO service provider hardware (IIO backends) for consumers to make use
of. Before, the logic with 'adi,adc-dev' was the opposite (it was kind
of consumer referencing other nodes/devices) and that proved to be wrong
and to not scale.
Now, IIO consumers of this hardware are expected to reference it using the
io-backends property. Hence, the new '#io-backend-cells' is being added
so the device is easily identified as a provider.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-2-f5242a5fb42a@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 19fb11d722 ("dt-bindings: adc: axi-adc: add clocks property")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52d06636a4 ]
Properties with GPIOs should define number of actual GPIOs, so add
missing maxItems to ep-gpios. Otherwise multiple GPIOs could be
provided which is not a true hardware description.
Fixes: aa222f9311 ("dt-bindings: PCI: Convert Rockchip RK3399 PCIe to DT schema")
Link: https://lore.kernel.org/linux-pci/20240401100058.15749-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6c1b27f9a ]
Fix up the free text binding references which were not updated when
moving the bindings out of staging and which had a leading current
directory component, respectively.
Fixes: 9bd9e0de1c ("mfd: hi6421-spmi-pmic: move driver from staging")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231130173757.13011-2-johan+linaro@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59e377a124 ]
The Qualcomm MSM8996 and MSM8998 platforms don't have separate power
domain for the UFS PHY. Replace required:power-domains with the
conditional schema.
Fixes: dc5cb63592 ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-2-f1fd15c33fb3@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fcbbf3ca ]
Some properties (function groups & pins) are meant to be arrays and
should allow multiple entries out of enum sets. Use "items" for those.
Mistake was noticed during validation of in-kernel DTS files.
Fixes: b9ffc18c63 ("dt-bindings: mediatek: convert pinctrl to yaml")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-1-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b952f96a57 ]
Support regulators found on the KingFisher board for miniPCIe (1.5 and
3.3v). For completeness, describe a 12v regulator while we are here.
Link: https://lore.kernel.org/linux-pci/20231105092908.3792-2-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stable-dep-of: 78d212851f ("dt-bindings: PCI: rcar-pci-host: Add missing IOMMU properties")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2f6ea61b6 ]
The original .txt bindings had the OV2680 power supply names correct,
but the transition from .txt to yaml spelled them incorrectly.
Fix the OV2680 power supply names as the original .txt bindings
as these are the names used by the OV2680 driver and in devicetree.
Fixes: 57226cd8c8 ("media: dt-bindings: ov2680: convert bindings to yaml")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8c4353685 ]
The temperature output register of the Loongson-2K2000 is defined in the
chip configuration domain, which is different from the Loongson-2K1000,
so it can't be fallbacked.
We need to use two groups of registers to describe it: the first group
is the high and low temperature threshold setting register; the second
group is the temperature output register.
It is true that this fix will cause ABI corruption, but it is necessary
otherwise the Loongson-2K2000 temperature sensor will not work properly.
Fixes: 72684d99a8 ("thermal: dt-bindings: add loongson-2 thermal")
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/5198999d679f1a1c3457385acb9fadfc85da1f1e.1713837379.git.zhoubinbin@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25c7d8472f ]
The thermal on the Loongson-2K0500 shares the design with the
Loongson-2K1000. Define corresponding compatible string, having the
loongson,ls2k1000-thermal as a fallback.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/26524a63abd2d032e4c45efe6ce3fedb46841768.1713837379.git.zhoubinbin@loongson.cn
Stable-dep-of: c8c4353685 ("dt-bindings: thermal: loongson,ls2k-thermal: Fix incorrect compatible definition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88071e31e9 ]
Add the missing 'thermal-sensor-cells' property which is required for
every thermal sensor as it's used when using phandles.
And add the thermal-sensor.yaml reference.
In fact, it was a careless mistake when submitting the driver that
caused it to not work properly. So the fix is necessary, although it
will result in the ABI break.
Fixes: 72684d99a8 ("thermal: dt-bindings: add loongson-2 thermal")
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/6d69362632271ab0af9a5fbfa3bc46a0894f1d54.1700817227.git.zhoubinbin@loongson.cn
Stable-dep-of: c8c4353685 ("dt-bindings: thermal: loongson,ls2k-thermal: Fix incorrect compatible definition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 306b38e3fa ]
Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 89384a2b65 upstream.
The "maxim,green-led-current-microamp" property is only available for
the max30105 part (it provides an extra green LED), and must be set to
false for the max30102 part.
Instead, the max30100 part has been used for that, which is not
supported by this binding (it has its own binding).
This error was introduced during the txt to yaml conversion.
Fixes: 5a6a65b11e ("dt-bindings:iio:health:maxim,max30102: txt to yaml conversion")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240316-max30102_binding_fix-v1-1-e8e58f69ef8a@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc349b0771 ]
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
Fixes: c94a9aabec ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
