[ Upstream commit 242d23efc9 ]
Do not mark tcons for reconnect when current connection matches any of
the targets returned by new referral even when there is no cached
entry.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 74ebd02163 ("cifs: all initializations for tcon should happen in tcon_info_alloc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630a1dec3b ]
When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
going with the suspend, resulting in a period where the power domain is
off, but the gadget driver remains connected. Within this time frame,
invoking vbus_event_work() will cause an error as it attempts to access
DWC3 registers for endpoint disabling after the power domain has been
completely shut down.
Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
controller and proceeds with a soft connect.
Fixes: 9f8a67b65a ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250528100315.2162699-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2831a81077 ]
The SSP2 controller has extra endpoint state preserve bit (ESP) which
setting causes that endpoint state will be preserved during
Halt Endpoint command. It is used only for EP0.
Without this bit the Command Verifier "TD 9.10 Bad Descriptor Test"
failed.
Setting this bit doesn't have any impact for SSP controller.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB95382CCD50549DABAEFD6156DD7CA@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b385ef088c ]
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array. However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it. This misunderstanding has led to buffer-overruns
in the past. It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases). So let's
do that.
The uses in this file all seem to assume that data *has been* written!
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231130105459.3208986-3-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 2831a81077 ("usb: cdnsp: Fix issue with CV Bad Descriptor test")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f61b96159 ]
When replaying log trees we use read_one_inode() to get an inode, which is
just a wrapper around btrfs_iget_logging(), which in turn is a wrapper for
btrfs_iget(). But read_one_inode() always returns NULL for any error
that btrfs_iget_logging() / btrfs_iget() may return and this is a problem
because:
1) In many callers of read_one_inode() we convert the NULL into -EIO,
which is not accurate since btrfs_iget() may return -ENOMEM and -ENOENT
for example, besides -EIO and other errors. So during log replay we
may end up reporting a false -EIO, which is confusing since we may
not have had any IO error at all;
2) When replaying directory deletes, at replay_dir_deletes(), we assume
the NULL returned from read_one_inode() means that the inode doesn't
exist and then proceed as if no error had happened. This is wrong
because unless btrfs_iget() returned ERR_PTR(-ENOENT), we had an
actual error and the target inode may exist in the target subvolume
root - this may later result in the log replay code failing at a
later stage (if we are "lucky") or succeed but leaving some
inconsistency in the filesystem.
So fix this by not ignoring errors from btrfs_iget_logging() and as
a consequence remove the read_one_inode() wrapper and just use
btrfs_iget_logging() directly. Also since btrfs_iget_logging() is
supposed to be called only against subvolume roots, just like
read_one_inode() which had a comment about it, add an assertion to
btrfs_iget_logging() to check that the target root corresponds to a
subvolume root.
Fixes: 5d4f98a28c ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a488d8ac2c ]
All callers of btrfs_iget_logging() are interested in the btrfs_inode
structure rather than the VFS inode, so make btrfs_iget_logging() return
the btrfs_inode instead, avoiding lots of BTRFS_I() calls.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5f61b96159 ("btrfs: fix inode lookup error handling during log replay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8befc61cbb ]
The root argument for fixup_inode_link_count() always matches the root of
the given inode, so remove the root argument and get it from the inode
argument. This also applies to the helpers count_inode_extrefs() and
count_inode_refs() used by fixup_inode_link_count() - they don't need the
root argument, as it always matches the root of the inode passed to them.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5f61b96159 ("btrfs: fix inode lookup error handling during log replay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a5d0dc55f ]
The root argument for btrfs_update_inode_fallback() always matches the
root of the given inode, so remove the root argument and get it from the
inode argument.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5f61b96159 ("btrfs: fix inode lookup error handling during log replay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cddaaacca9 ]
The noinline attribute of btrfs_update_inode() is pointless as the
function is exported and widely used, so remove it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5f61b96159 ("btrfs: fix inode lookup error handling during log replay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a215b57239 upstream.
Commit under Fixes tightened up the memory accounting for Netlink
sockets. Looks like the accounting is too strict for some existing
use cases, Marek reported issues with nl80211 / WiFi iw CLI.
To reduce number of iterations Netlink dumps try to allocate
messages based on the size of the buffer passed to previous
recvmsg() calls. If user space uses a larger buffer in recvmsg()
than sk_rcvbuf we will allocate an skb we won't be able to queue.
Make sure we always allow at least one skb to be queued.
Same workaround is already present in netlink_attachskb().
Alternative would be to cap the allocation size to
rcvbuf - rmem_alloc
but as I said, the workaround is already present in other places.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/9794af18-4905-46c6-b12c-365ea2f05858@samsung.com
Fixes: ae8f160e7e ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711001121.3649033-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3c4a125ec upstream.
We need to allow queuing at least one skb even when skb is
larger than sk->sk_rcvbuf.
The cited commit made a mistake while converting a condition
in netlink_broadcast_deliver().
Let's correct the rmem check for the allow-one-skb rule.
Fixes: ae8f160e7e ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711053208.2965945-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 277627b431 upstream.
If the call of ksmbd_vfs_lock_parent() fails, we drop the parent_path
references and return an error. We need to drop the write access we
just got on parent_path->mnt before we drop the mount reference - callers
assume that ksmbd_vfs_kern_path_locked() returns with mount write
access grabbed if and only if it has returned 0.
Fixes: 864fb5d371 ("ksmbd: fix possible deadlock in smb2_open")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c2b53997e upstream.
The qp is created by rdma_create_qp() as t->cm_id->qp
and t->qp is just a shortcut.
rdma_destroy_qp() also calls ib_destroy_qp(cm_id->qp) internally,
but it is protected by a mutex, clears the cm_id and also calls
trace_cm_qp_destroy().
This should make the tracing more useful as both
rdma_create_qp() and rdma_destroy_qp() are traces and it makes
the code look more sane as functions from the same layer are used
for the specific qp object.
trace-cmd stream -e rdma_cma:cm_qp_create -e rdma_cma:cm_qp_destroy
shows this now while doing a mount and unmount from a client:
<...>-80 [002] 378.514182: cm_qp_create: cm.id=1 src=172.31.9.167:5445 dst=172.31.9.166:37113 tos=0 pd.id=0 qp_type=RC send_wr=867 recv_wr=255 qp_num=1 rc=0
<...>-6283 [001] 381.686172: cm_qp_destroy: cm.id=1 src=172.31.9.167:5445 dst=172.31.9.166:37113 tos=0 qp_num=1
Before we only saw the first line.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <stfrench@microsoft.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76303ee8d5 upstream.
Only select ARCH_WANT_HUGE_PMD_SHARE on 64-bit x86.
Page table sharing requires at least three levels because it involves
shared references to PMD tables; 32-bit x86 has either two-level paging
(without PAE) or three-level paging (with PAE), but even with
three-level paging, having a dedicated PGD entry for hugetlb is only
barely possible (because the PGD only has four entries), and it seems
unlikely anyone's actually using PMD sharing on 32-bit.
Having ARCH_WANT_HUGE_PMD_SHARE enabled on non-PAE 32-bit X86 (which
has 2-level paging) became particularly problematic after commit
59d9094df3 ("mm: hugetlb: independent PMD page table shared count"),
since that changes `struct ptdesc` such that the `pt_mm` (for PGDs) and
the `pt_share_count` (for PMDs) share the same union storage - and with
2-level paging, PMDs are PGDs.
(For comparison, arm64 also gates ARCH_WANT_HUGE_PMD_SHARE on the
configuration of page tables such that it is never enabled with 2-level
paging.)
Closes: https://lore.kernel.org/r/srhpjxlqfna67blvma5frmy3aa@altlinux.org
Fixes: cfe28c5d63 ("x86: mm: Remove x86 version of huge_pmd_share.")
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Vitaly Chikunov <vt@altlinux.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250702-x86-2level-hugetlb-v2-1-1a98096edf92%40google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b937a1ed6 upstream.
AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an error that
causes RDSEED to always return 0xffffffff, while RDRAND works correctly.
Mask the RDSEED cap for this CPU so that both /proc/cpuinfo and direct CPUID
read report RDSEED as unavailable.
[ bp: Move to amd.c, massage. ]
Signed-off-by: Mikhail Paulyshka <me@mixaill.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250524145319.209075-1-me@mixaill.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 505b730ede upstream.
After enabling the clocks each error path must disable the clocks again.
One of them failed to do so. Unify the error paths to use goto to make it
harder for future changes to add a similar bug.
Fixes: 7ca59947b5 ("pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172728.626815-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
[ukleinek: backported to 6.6.y]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fea18c6863 upstream.
vmap_pages_pte_range() enters the lazy MMU mode, but fails to leave it in
case an error is encountered.
Link: https://lkml.kernel.org/r/20250623075721.2817094-1-agordeev@linux.ibm.com
Fixes: 2ba3e6947a ("mm/vmalloc: track which page-table levels were modified")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202506132017.T1l1l6ME-lkp@intel.com/
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a02b0cde8e upstream.
In commit 721255b982 ("genirq: Use a maple tree for interrupt descriptor
management"), the irq_desc_tree was replaced with a sparse_irqs tree using
a maple tree structure. Since the script looked for the irq_desc_tree
symbol which is no longer available, no interrupts would be printed and
the script output would not be useful anymore.
In addition to looking up the correct symbol (sparse_irqs), a new module
(mapletree.py) is added whose mtree_load() implementation is largely
copied after the C version and uses the same variable and intermediate
function names wherever possible to ensure that both the C and Python
version be updated in the future.
This restores the scripts' output to match that of /proc/interrupts.
Link: https://lkml.kernel.org/r/20250625021020.1056930-1-florian.fainelli@broadcom.com
Fixes: 721255b982 ("genirq: Use a maple tree for interrupt descriptor management")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50f4d2ba26 upstream.
The per-CPU MCE interrupts are looked up by reference and need to be
de-referenced before printing, otherwise we print the addresses of the
variables instead of their contents:
MCE: 18379471554386948492 Machine check exceptions
MCP: 18379471554386948488 Machine check polls
The corrected output looks like this instead now:
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
Link: https://lkml.kernel.org/r/20250625021109.1057046-1-florian.fainelli@broadcom.com
Link: https://lkml.kernel.org/r/20250624030020.882472-1-florian.fainelli@broadcom.com
Fixes: b0969d7687 ("scripts/gdb: print interrupts")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7627b459aa upstream.
The text line would not be appended to as it should have, it should have
been a '+=' but ended up being a '==', fix that.
Link: https://lkml.kernel.org/r/20250623164153.746359-1-florian.fainelli@broadcom.com
Fixes: b0969d7687 ("scripts/gdb: print interrupts")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82241a83cd upstream.
On some large machines with a high number of CPUs running a 64K pagesize
kernel, we found that the 'RES' field is always 0 displayed by the top
command for some processes, which will cause a lot of confusion for users.
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
875525 root 20 0 12480 0 0 R 0.3 0.0 0:00.08 top
1 root 20 0 172800 0 0 S 0.0 0.0 0:04.52 systemd
The main reason is that the batch size of the percpu counter is quite
large on these machines, caching a significant percpu value, since
converting mm's rss stats into percpu_counter by commit f1a7941243 ("mm:
convert mm's rss stats into percpu_counter"). Intuitively, the batch
number should be optimized, but on some paths, performance may take
precedence over statistical accuracy. Therefore, introducing a new
interface to add the percpu statistical count and display it to users,
which can remove the confusion. In addition, this change is not expected
to be on a performance-critical path, so the modification should be
acceptable.
In addition, the 'mm->rss_stat' is updated by using add_mm_counter() and
dec/inc_mm_counter(), which are all wrappers around
percpu_counter_add_batch(). In percpu_counter_add_batch(), there is
percpu batch caching to avoid 'fbc->lock' contention. This patch changes
task_mem() and task_statm() to get the accurate mm counters under the
'fbc->lock', but this should not exacerbate kernel 'mm->rss_stat' lock
contention due to the percpu batch caching of the mm counters. The
following test also confirm the theoretical analysis.
I run the stress-ng that stresses anon page faults in 32 threads on my 32
cores machine, while simultaneously running a script that starts 32
threads to busy-loop pread each stress-ng thread's /proc/pid/status
interface. From the following data, I did not observe any obvious impact
of this patch on the stress-ng tests.
w/o patch:
stress-ng: info: [6848] 4,399,219,085,152 CPU Cycles 67.327 B/sec
stress-ng: info: [6848] 1,616,524,844,832 Instructions 24.740 B/sec (0.367 instr. per cycle)
stress-ng: info: [6848] 39,529,792 Page Faults Total 0.605 M/sec
stress-ng: info: [6848] 39,529,792 Page Faults Minor 0.605 M/sec
w/patch:
stress-ng: info: [2485] 4,462,440,381,856 CPU Cycles 68.382 B/sec
stress-ng: info: [2485] 1,615,101,503,296 Instructions 24.750 B/sec (0.362 instr. per cycle)
stress-ng: info: [2485] 39,439,232 Page Faults Total 0.604 M/sec
stress-ng: info: [2485] 39,439,232 Page Faults Minor 0.604 M/sec
On comparing a very simple app which just allocates & touches some
memory against v6.1 (which doesn't have f1a7941243) and latest Linus
tree (4c06e63b92) I can see that on latest Linus tree the values for
VmRSS, RssAnon and RssFile from /proc/self/status are all zeroes while
they do report values on v6.1 and a Linus tree with this patch.
Link: https://lkml.kernel.org/r/f4586b17f66f97c174f7fd1f8647374fdb53de1c.1749119050.git.baolin.wang@linux.alibaba.com
Fixes: f1a7941243 ("mm: convert mm's rss stats into percpu_counter")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by Donet Tom <donettom@linux.ibm.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea9b77f98d upstream.
On destroy, we should set each node dead. But current code miss this when
the maple tree has only the root node.
The reason is mt_destroy_walk() leverage mte_destroy_descend() to set node
dead, but this is skipped since the only root node is a leaf.
Fixes this by setting the node dead if it is a leaf.
Link: https://lore.kernel.org/all/20250407231354.11771-1-richard.weiyang@gmail.com/
Link: https://lkml.kernel.org/r/20250624191841.64682-1-Liam.Howlett@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a95743b530 upstream.
Some libc's like musl libc don't provide execinfo.h since it's not part of
POSIX. In order to fix compilation on musl, only include execinfo.h if
available (HAVE_BACKTRACE_SUPPORT)
This was discovered with c104c16073 ("Kunit to check the longest symbol
length") which starts to include linux/kallsyms.h with Alpine Linux'
configs.
Link: https://lkml.kernel.org/r/20250622014608.448718-1-fossdd@pwned.life
Fixes: c104c16073 ("Kunit to check the longest symbol length")
Signed-off-by: Achill Gilgenast <fossdd@pwned.life>
Cc: Luis Henriques <luis@igalia.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de1675de39 upstream.
Revert commit 234f715550 ("ACPI: battery: negate current when
discharging") breaks not one but several userspace implementations
of battery monitoring: Steam and MangoHud. Perhaps it breaks more,
but those are the two that have been tested.
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Closes: https://lore.kernel.org/linux-acpi/87C1B2AF-D430-4568-B620-14B941A8ABA4@linux.dev/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6bfc9afc7 upstream.
Acquire GEM handles in drm_framebuffer_init() and release them in
the corresponding drm_framebuffer_cleanup(). Ties the handle's
lifetime to the framebuffer. Not all GEM buffer objects have GEM
handles. If not set, no refcounting takes place. This is the case
for some fbdev emulation. This is not a problem as these GEM objects
do not use dma-bufs and drivers will not release them while fbdev
emulation is running. Framebuffer flags keep a bit per color plane
of which the framebuffer holds a GEM handle reference.
As all drivers use drm_framebuffer_init(), they will now all hold
dma-buf references as fixed in commit 5307dce878 ("drm/gem: Acquire
references on GEM handles for framebuffers").
In the GEM framebuffer helpers, restore the original ref counting
on buffer objects. As the helpers for handle refcounting are now
no longer called from outside the DRM core, unexport the symbols.
v3:
- don't mix internal flags with mode flags (Christian)
v2:
- track framebuffer handle refs by flag
- drop gma500 cleanup (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5307dce878 ("drm/gem: Acquire references on GEM handles for framebuffers")
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/dri-devel/20250703115915.3096-1-spasswolf@web.de/
Tested-by: Bert Karwatzki <spasswolf@web.de>
Tested-by: Mario Limonciello <superm1@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250707131224.249496-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6c7bc4a68 upstream.
This reverts commit ffd603f214.
Commit ffd603f214 ("usb: gadget: u_serial: Add null pointer check in
gs_start_io") adds null pointer checks at the beginning of the
gs_start_io() function to prevent a null pointer dereference. However,
these checks are redundant because the function's comment already
requires callers to hold the port_lock and ensure port.tty and port_usb
are not null. All existing callers already follow these rules.
The true cause of the null pointer dereference is a race condition. When
gs_start_io() calls either gs_start_rx() or gs_start_tx(), the port_lock
is temporarily released for usb_ep_queue(). This allows port.tty and
port_usb to be cleared.
Fixes: ffd603f214 ("usb: gadget: u_serial: Add null pointer check in gs_start_io")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250617050844.1848232-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c529c3730b upstream.
A race condition occurs when gs_start_io() calls either gs_start_rx() or
gs_start_tx(), as those functions briefly drop the port_lock for
usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear
port.tty and port_usb, respectively.
Use the null-safe TTY Port helper function to wake up TTY.
Example
CPU1: CPU2:
gserial_connect() // lock
gs_close() // await lock
gs_start_rx() // unlock
usb_ep_queue()
gs_close() // lock, reset port.tty and unlock
gs_start_rx() // lock
tty_wakeup() // NPE
Fixes: 35f95fd7f2 ("TTY: usb/u_serial, use tty from tty_port")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/linux-usb/20240116141801.396398-1-khtsai@google.com/
Link: https://lore.kernel.org/r/20250617050844.1848232-2-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd46cece51 upstream.
Object creation is a careful dance where we must guarantee that the
object is fully constructed before it is visible to other threads, and
GEM buffer objects are no difference.
Final publishing happens by calling drm_gem_handle_create(). After
that the only allowed thing to do is call drm_gem_object_put() because
a concurrent call to the GEM_CLOSE ioctl with a correctly guessed id
(which is trivial since we have a linear allocator) can already tear
down the object again.
Luckily most drivers get this right, the very few exceptions I've
pinged the relevant maintainers for. Unfortunately we also need
drm_gem_handle_create() when creating additional handles for an
already existing object (e.g. GETFB ioctl or the various bo import
ioctl), and hence we cannot have a drm_gem_handle_create_and_put() as
the only exported function to stop these issues from happening.
Now unfortunately the implementation of drm_gem_handle_create() isn't
living up to standards: It does correctly finishe object
initialization at the global level, and hence is safe against a
concurrent tear down. But it also sets up the file-private aspects of
the handle, and that part goes wrong: We fully register the object in
the drm_file.object_idr before calling drm_vma_node_allow() or
obj->funcs->open, which opens up races against concurrent removal of
that handle in drm_gem_handle_delete().
Fix this with the usual two-stage approach of first reserving the
handle id, and then only registering the object after we've completed
the file-private setup.
Jacek reported this with a testcase of concurrently calling GEM_CLOSE
on a freshly-created object (which also destroys the object), but it
should be possible to hit this with just additional handles created
through import or GETFB without completed destroying the underlying
object with the concurrent GEM_CLOSE ioctl calls.
Note that the close-side of this race was fixed in f6cd7daecf ("drm:
Release driver references to handle before making it available
again"), which means a cool 9 years have passed until someone noticed
that we need to make this symmetry or there's still gaps left :-/
Without the 2-stage close approach we'd still have a race, therefore
that's an integral part of this bugfix.
More importantly, this means we can have NULL pointers behind
allocated id in our drm_file.object_idr. We need to check for that
now:
- drm_gem_handle_delete() checks for ERR_OR_NULL already
- drm_gem.c:object_lookup() also chekcs for NULL
- drm_gem_release() should never be called if there's another thread
still existing that could call into an IOCTL that creates a new
handle, so cannot race. For paranoia I added a NULL check to
drm_gem_object_release_handle() though.
- most drivers (etnaviv, i915, msm) are find because they use
idr_find(), which maps both ENOENT and NULL to NULL.
- drivers using idr_for_each_entry() should also be fine, because
idr_get_next does filter out NULL entries and continues the
iteration.
- The same holds for drm_show_memory_stats().
v2: Use drm_WARN_ON (Thomas)
Reported-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: stable@vger.kernel.org
Cc: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250707151814.603897-1-simona.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97e000acf2 upstream.
Unlocking the resv object was missing in the error path, additionally to
that we should move over the resource only after the fence slot was
reserved.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Fixes: c8d4c18bfb ("dma-buf/drivers: make reserving a shared slot mandatory v4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250616130726.22863-3-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8af39ec5cf upstream.
A small race exists between spsc_queue_push and the run-job worker, in
which spsc_queue_push may return not-first while the run-job worker has
already idled due to the job count being zero. If this race occurs, job
scheduling stops, leading to hangs while waiting on the job’s DMA
fences.
Seal this race by incrementing the job count before appending to the
SPSC queue.
This race was observed on a drm-tip 6.16-rc1 build with the Xe driver in
an SVM test case.
Fixes: 1b1f42d8fd ("drm: move amd_gpu_scheduler into common location")
Fixes: 27105db6c6 ("drm/amdgpu: Add SPSC queue to scheduler.")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250613212013.719312-1-matthew.brost@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5307dce878 upstream.
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An example is shown below.
[ 156.791968] ------------[ cut here ]------------
[ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430
[...]
[ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430
[ 157.043420] Call Trace:
[ 157.045898] <TASK>
[ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710
[ 157.065567] ? dma_buf_vmap+0x224/0x430
[ 157.069446] ? __warn.cold+0x58/0xe4
[ 157.073061] ? dma_buf_vmap+0x224/0x430
[ 157.077111] ? report_bug+0x1dd/0x390
[ 157.080842] ? handle_bug+0x5e/0xa0
[ 157.084389] ? exc_invalid_op+0x14/0x50
[ 157.088291] ? asm_exc_invalid_op+0x16/0x20
[ 157.092548] ? dma_buf_vmap+0x224/0x430
[ 157.096663] ? dma_resv_get_singleton+0x6d/0x230
[ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10
[ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10
[ 157.110697] drm_gem_shmem_vmap+0x74/0x710
[ 157.114866] drm_gem_vmap+0xa9/0x1b0
[ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0
[ 157.123086] drm_gem_fb_vmap+0xab/0x300
[ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10
[ 157.133032] ? lockdep_init_map_type+0x19d/0x880
[ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0
[ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180
[ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40
[...]
[ 157.346424] ---[ end trace 0000000000000000 ]---
Acquiring GEM handles for the framebuffer's GEM buffer objects prevents
this from happening. The framebuffer's cleanup later puts the handle
references.
Commit 1a148af060 ("drm/gem-shmem: Use dma_buf from GEM object
instance") triggers the segmentation fault easily by using the dma-buf
field more widely. The underlying issue with reference counting has
been present before.
v2:
- acquire the handle instead of the BO (Christian)
- fix comment style (Christian)
- drop the Fixes tag (Christian)
- rename err_ gotos
- add missing Link tag
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.15/source/drivers/gpu/drm/drm_gem.c#L241 # [1]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250630084001.293053-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 737bb912eb upstream.
This patch is a mitigation to prevent the A-MSDU spoofing vulnerability
for mesh networks. The initial update to the IEEE 802.11 standard, in
response to the FragAttacks, missed this case (CVE-2025-27558). It can
be considered a variant of CVE-2020-24588 but for mesh networks.
This patch tries to detect if a standard MSDU was turned into an A-MSDU
by an adversary. This is done by parsing a received A-MSDU as a standard
MSDU, calculating the length of the Mesh Control header, and seeing if
the 6 bytes after this header equal the start of an rfc1042 header. If
equal, this is a strong indication of an ongoing attack attempt.
This defense was tested with mac80211_hwsim against a mesh network that
uses an empty Mesh Address Extension field, i.e., when four addresses
are used, and when using a 12-byte Mesh Address Extension field, i.e.,
when six addresses are used. Functionality of normal MSDUs and A-MSDUs
was also tested, and confirmed working, when using both an empty and
12-byte Mesh Address Extension field.
It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh
networks keep being detected and prevented.
Note that the vulnerability being patched, and the defense being
implemented, was also discussed in the following paper and in the
following IEEE 802.11 presentation:
https://papers.mathyvanhoef.com/wisec2025.pdfhttps://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://patch.msgid.link/20250616004635.224344-1-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93712205ce upstream.
On some platforms, the UFS-reset pin has no interrupt logic in TLMM but
is nevertheless registered as a GPIO in the kernel. This enables the
user-space to trigger a BUG() in the pinctrl-msm driver by running, for
example: `gpiomon -c 0 113` on RB2.
The exact culprit is requesting pins whose intr_detection_width setting
is not 1 or 2 for interrupts. This hits a BUG() in
msm_gpio_irq_set_type(). Potentially crashing the kernel due to an
invalid request from user-space is not optimal, so let's go through the
pins and mark those that would fail the check as invalid for the irq chip
as we should not even register them as available irqs.
This function can be extended if we determine that there are more
corner-cases like this.
Fixes: f365be0925 ("pinctrl: Add Qualcomm TLMM driver")
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612091448.41546-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c17fb542db upstream.
The commit message of commit 6ec1f02394 ("md/md-bitmap: fix stats
collection for external bitmaps") states:
Remove the external bitmap check as the statistics should be
available regardless of bitmap storage location.
Return -EINVAL only for invalid bitmap with no storage (neither in
superblock nor in external file).
But, the code does not adhere to the above, as it does only check for
a valid super-block for "internal" bitmaps. Hence, we observe:
Oops: GPF, probably for non-canonical address 0x1cd66f1f40000028
RIP: 0010:bitmap_get_stats+0x45/0xd0
Call Trace:
seq_read_iter+0x2b9/0x46a
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6d/0xf0
do_syscall_64+0x8c/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
We fix this by checking the existence of a super-block for both the
internal and external case.
Fixes: 6ec1f02394 ("md/md-bitmap: fix stats collection for external bitmaps")
Cc: stable@vger.kernel.org
Reported-by: Gerald Gibson <gerald.gibson@oracle.com>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Link: https://lore.kernel.org/linux-raid/20250702091035.2061312-1-haakon.bugge@oracle.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e914ef063 upstream.
Use addrconf_add_dev() instead of ipv6_find_idev() in
addrconf_gre_config() so that we don't just get the inet6_dev, but also
install the default ff00::/8 multicast route.
Before commit 3e6a0243ff ("gre: Fix again IPv6 link-local address
generation."), the multicast route was created at the end of the
function by addrconf_add_mroute(). But this code path is now only taken
in one particular case (gre devices not bound to a local IP address and
in EUI64 mode). For all other cases, the function exits early and
addrconf_add_mroute() is not called anymore.
Using addrconf_add_dev() instead of ipv6_find_idev() in
addrconf_gre_config(), fixes the problem as it will create the default
multicast route for all gre devices. This also brings
addrconf_gre_config() a bit closer to the normal netdevice IPv6
configuration code (addrconf_dev_config()).
Cc: stable@vger.kernel.org
Fixes: 3e6a0243ff ("gre: Fix again IPv6 link-local address generation.")
Reported-by: Aiden Yang <ling@moedove.com>
Closes: https://lore.kernel.org/netdev/CANR=AhRM7YHHXVxJ4DmrTNMeuEOY87K2mLmo9KMed1JMr20p6g@mail.gmail.com/
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/027a923dcb550ad115e6d93ee8bb7d310378bd01.1752070620.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecf371f8b0 upstream.
Reject migration of SEV{-ES} state if either the source or destination VM
is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the
section between incrementing created_vcpus and online_vcpus. The bulk of
vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs
in parallel, and so sev_info.es_active can get toggled from false=>true in
the destination VM after (or during) svm_vcpu_create(), resulting in an
SEV{-ES} VM effectively having a non-SEV{-ES} vCPU.
The issue manifests most visibly as a crash when trying to free a vCPU's
NULL VMSA page in an SEV-ES VM, but any number of things can go wrong.
BUG: unable to handle page fault for address: ffffebde00000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024
RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline]
RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline]
RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline]
RIP: 0010:PageHead include/linux/page-flags.h:866 [inline]
RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067
Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0
RSP: 0018:ffff8984551978d0 EFLAGS: 00010246
RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000
RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000
R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000
R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000
FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0
DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169
svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515
kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396
kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline]
kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490
kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895
kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310
kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369
__fput+0x3e4/0x9e0 fs/file_table.c:465
task_work_run+0x1a9/0x220 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x7f0/0x25b0 kernel/exit.c:953
do_group_exit+0x203/0x2d0 kernel/exit.c:1102
get_signal+0x1357/0x1480 kernel/signal.c:3034
arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218
do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f87a898e969
</TASK>
Modules linked in: gq(O)
gsmi: Log Shutdown Reason 0x03
CR2: ffffebde00000000
---[ end trace 0000000000000000 ]---
Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing
the host is likely desirable due to the VMSA being consumed by hardware.
E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a
bogus VMSA page. Accessing PFN 0 is "fine"-ish now that it's sequestered
away thanks to L1TF, but panicking in this scenario is preferable to
potentially running with corrupted state.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Fixes: 0b020f5af0 ("KVM: SEV: Add support for SEV-ES intra host migration")
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Cc: James Houghton <jthoughton@google.com>
Cc: Peter Gonda <pgonda@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250602224459.41505-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7f4dff21f upstream.
To avoid imposing an ordering constraint on userspace, allow 'invalid'
event channel targets to be configured in the IRQ routing table.
This is the same as accepting interrupts targeted at vCPUs which don't
exist yet, which is already the case for both Xen event channels *and*
for MSIs (which don't do any filtering of permitted APIC ID targets at
all).
If userspace actually *triggers* an IRQ with an invalid target, that
will fail cleanly, as kvm_xen_set_evtchn_fast() also does the same range
check.
If KVM enforced that the IRQ target must be valid at the time it is
*configured*, that would force userspace to create all vCPUs and do
various other parts of setup (in this case, setting the Xen long_mode)
before restoring the IRQ table.
Cc: stable@vger.kernel.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/e489252745ac4b53f1f7f50570b03fb416aa2065.camel@infradead.org
[sean: massage comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30ad231a50 upstream.
CMCI banks are not cleared during shutdown on Intel CPUs. As a side effect,
when a kexec is performed, CPUs coming back online are unable to
rediscover/claim these occupied banks which breaks MCE reporting.
Clear the CPU ownership during shutdown via cmci_clear() so the banks can
be reclaimed and MCE reporting will become functional once more.
[ bp: Massage commit message. ]
Reported-by: Aijay Adams <aijay@meta.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250627174935.95194-1-inwardvessel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c113a5b28 upstream.
Currently, the MCE subsystem sysfs interface will be removed if the
thresholding sysfs interface fails to be created. A common failure is due to
new MCA bank types that are not recognized and don't have a short name set.
The MCA thresholding feature is optional and should not break the common MCE
sysfs interface. Also, new MCA bank types are occasionally introduced, and
updates will be needed to recognize them. But likewise, this should not break
the common sysfs interface.
Keep the MCE sysfs interface regardless of the status of the thresholding
sysfs interface.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-1-236dd74f645f@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f6e3b7206 upstream.
The MCA threshold limit must be reset after servicing the interrupt.
Currently, the restart function doesn't have an explicit check for this. It
makes some assumptions based on the current limit and what's in the registers.
These assumptions don't always hold, so the limit won't be reset in some
cases.
Make the reset condition explicit. Either an interrupt/overflow has occurred
or the bank is being initialized.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-4-236dd74f645f@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d66e1e90b1 upstream.
Ensure that sysfs init doesn't fail for new/unrecognized bank types or if
a bank has additional blocks available.
Most MCA banks have a single thresholding block, so the block takes the same
name as the bank.
Unified Memory Controllers (UMCs) are a special case where there are two
blocks and each has a unique name.
However, the microarchitecture allows for five blocks. Any new MCA bank types
with more than one block will be missing names for the extra blocks. The MCE
sysfs will fail to initialize in this case.
Fixes: 87a6d4091b ("x86/mce/AMD: Update sysfs bank names for SMCA systems")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-3-236dd74f645f@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa332f5dc6 upstream.
The "intf" list iterator is an invalid pointer if the correct
"intf->intf_num" is not found. Calling atomic_dec(&intf->nr_users) on
and invalid pointer will lead to memory corruption.
We don't really need to call atomic_dec() if we haven't called
atomic_add_return() so update the if (intf->in_shutdown) path as well.
Fixes: 8e76741c3d ("ipmi: Add a limit on the number of users that may use IPMI")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <aBjMZ8RYrOt6NOgi@stanley.mountain>
Signed-off-by: Corey Minyard <corey@minyard.net>
[ - Dropped change to the `if (intf->in_shutdown)` block since that logic
doesn't exist yet.
- Modified out_unlock to release the srcu lock instead of the mutex
since we don't have the mutex here yet. ]
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 880a88f318 upstream.
If an AF_RXRPC service socket is opened and bound, but calls are
preallocated, then rxrpc_alloc_incoming_call() will oops because the
rxrpc_backlog struct doesn't get allocated until the first preallocation is
made.
Fix this by returning NULL from rxrpc_alloc_incoming_call() if there is no
backlog struct. This will cause the incoming call to be aborted.
Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Suggested-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250708211506.2699012-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89fb8acc38 upstream.
Currently, for controllers with extended advertising, the advertising
data is set in the asynchronous response handler for extended
adverstising params. As most advertising settings are performed in a
synchronous context, the (asynchronous) setting of the advertising data
is done too late (after enabling the advertising).
Move setting of adverstising data from asynchronous response handler
into synchronous context to fix ordering of HCI commands.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: a0fb3726ba ("Bluetooth: Use Set ext adv/scan rsp data if controller supports")
Cc: stable@vger.kernel.org
v2: https://lore.kernel.org/linux-bluetooth/20250626115209.17839-1-ceggers@arri.de/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[ This patch deviates from the upstream version because 3 functions in
hci_sync.c (hci_set_ext_adv_data_sync, hci_set_adv_data_sync and
hci_update_adv_data_sync) had to be moved up within the file. The
content of these functions differs between 6.6 and newer kernels. ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 440cf77625 upstream.
On recent Linux distros like Ubuntu Noble and Debian Bookworm, the
'pkg-config-aarch64-linux-gnu' package is missing. As a result, the
aarch64-linux-gnu-pkg-config command is not available, which causes
build failures.
When a build passes the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_PATH, like a user uses make command or a build system
(like Yocto, Buildroot, etc) prepares the variables and passes to the
Perf's Makefile, the commit keeps these variables for package
configuration. Otherwise, this commit sets the PKG_CONFIG_LIBDIR
variable to use the Multiarch libs for the cross compilation.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fba46a5d83 upstream.
Temporarily clear the preallocation flag when explicitly requesting
allocations. Pre-existing allocations are already counted against the
request through mas_node_count_gfp(), but the allocations will not happen
if the MA_STATE_PREALLOC flag is set. This flag is meant to avoid
re-allocating in bulk allocation mode, and to detect issues with
preallocation calculations.
The MA_STATE_PREALLOC flag should also always be set on zero allocations
so that detection of underflow allocations will print a WARN_ON() during
consumption.
User visible effect of this flaw is a WARN_ON() followed by a null pointer
dereference when subsequent requests for larger number of nodes is
ignored, such as the vma merge retry in mmap_region() caused by drivers
altering the vma flags (which happens in v6.6, at least)
Link: https://lkml.kernel.org/r/20250616184521.3382795-3-Liam.Howlett@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reported-by: Hailong Liu <hailong.liu@oppo.com>
Link: https://lore.kernel.org/all/1652f7eb-a51b-4fee-8058-c73af63bacd1@oppo.com/
Link: https://lore.kernel.org/all/20250428184058.1416274-1-Liam.Howlett@oracle.com/
Link: https://lore.kernel.org/all/20250429014754.1479118-1-Liam.Howlett@oracle.com/
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Hailong Liu <hailong.liu@oppo.com>
Cc: zhangpeng.00@bytedance.com <zhangpeng.00@bytedance.com>
Cc: Steve Kang <Steve.Kang@unisoc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 69e4186773 ]
When userspace is using AF_RXRPC to provide a server, it has to preallocate
incoming calls and assign to them call IDs that will be used to thread
related recvmsg() and sendmsg() together. The preallocated call IDs will
automatically be attached to calls as they come in until the pool is empty.
To the kernel, the call IDs are just arbitrary numbers, but userspace can
use the call ID to hold a pointer to prepared structs. In any case, the
user isn't permitted to create two calls with the same call ID (call IDs
become available again when the call ends) and EBADSLT should result from
sendmsg() if an attempt is made to preallocate a call with an in-use call
ID.
However, the cleanup in the error handling will trigger both assertions in
rxrpc_cleanup_call() because the call isn't marked complete and isn't
marked as having been released.
Fix this by setting the call state in rxrpc_service_prealloc_one() and then
marking it as being released before calling the cleanup function.
Fixes: 00e907127e ("rxrpc: Preallocate peers, conns and calls for incoming service requests")
Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250708211506.2699012-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
