commit 4c00673489 upstream.
The current usage of memblock_reserve() in init_pvh_bootparams() is done before
the .bss is zeroed, and that used to be fine when
memblock_reserved_init_regions implicitly ended up in the .meminit.data
section. However after commit 73db3abdca memblock_reserved_init_regions
ends up in the .bss section, thus breaking it's usage before the .bss is
cleared.
Move and rename the call to xen_reserve_extra_memory() so it's done in the
x86_init.oem.arch_setup hook, which gets executed after the .bss has been
zeroed, but before calling e820__memory_setup().
Fixes: 73db3abdca ("init/modpost: conditionally check section mismatch to __meminit*")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240725073116.14626-3-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
[ Context fixup for hypercall_page removal ]
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc05ea89c9 upstream.
In preparation for making the function static.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240725073116.14626-2-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
[ Stable backport - move the code as it exists ]
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87af633689 upstream.
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages. Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved. This way Linux creates the underlying page
structures required for metadata management.
Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above. However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.
This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.
Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized. This accounts for any regions used for scratch remote
mappings. Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.
Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().
Much like a6aa4eb994, the code in this changeset should have been part of
38620fc4e8.
Fixes: a6aa4eb994 ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e93ec87286 ]
Today a PV guest (including dom0) can create 2MB contiguous memory
regions for DMA buffers at max. This has led to problems at least
with the megaraid_sas driver, which wants to allocate a 2.3MB DMA
buffer.
The limiting factor is the frame array used to do the hypercall for
making the memory contiguous, which has 512 entries and is just a
static array in mmu_pv.c.
In order to not waste memory for non-PV guests, put the initial
frame array into .init.data section and dynamically allocate an array
from the .init_after_bootmem hook of PV guests.
In case a contiguous memory area larger than the initially supported
2MB is requested, allocate a larger buffer for the frame list. Note
that such an allocation is tried only after memory management has been
initialized properly, which is tested via a flag being set in the
.init_after_bootmem hook.
Fixes: 9f40ec84a7 ("xen/swiotlb: add alignment check for dma buffers")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bd797b801 ]
xen_hypercall_hvm() is missing a FRAME_END at the end, add it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502030848.HTNTTuo9-lkp@intel.com/
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98a5cfd232 ]
xen_hypercall_hvm(), which is used when running as a Xen PVH guest at
most only once during early boot, is clobbering %rbx. Depending on
whether the caller relies on %rbx to be preserved across the call or
not, this clobbering might result in an early crash of the system.
This can be avoided by using an already saved register instead of %rbx.
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The backport of upstream patch a2796dff62 ("x86/xen: don't do PV iret
hypercall through hypercall page") missed to adapt the SLS mitigation
config check from CONFIG_MITIGATION_SLS to CONFIG_SLS.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit e5b1574a8c which is
commit a4eeb2176d upstream.
When this change is backported to the 6.6.y tree, it can cause build
errors on some configurations when KEXEC is not enabled, so revert it
for now.
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Link: https://lore.kernel.org/r/3DB3A6D3-0D3A-4682-B4FA-407B2D3263B2@cloudflare.com
Reported-by: Lars Wendler <wendler.lars@web.de>
Link: https://lore.kernel.org/r/20250110103328.0e3906a8@chagall.paradoxon.rec
Reported-by: Chris Clayton <chris2553@googlemail.com>
Link: https://lore.kernel.org/r/10c7be00-b1f8-4389-801b-fb2d0b22468d@googlemail.com
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Naman Jain <namjain@linux.microsoft.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4eeb2176d ]
Now crash codes under kernel/ folder has been split out from kexec
code, crash dumping can be separated from kexec reboot in config
items on x86 with some adjustments.
Here, also change some ifdefs or IS_ENABLED() check to more appropriate
ones, e,g
- #ifdef CONFIG_KEXEC_CORE -> #ifdef CONFIG_CRASH_DUMP
- (!IS_ENABLED(CONFIG_KEXEC_CORE)) - > (!IS_ENABLED(CONFIG_CRASH_RESERVE))
[bhe@redhat.com: don't nest CONFIG_CRASH_DUMP ifdef inside CONFIG_KEXEC_CODE ifdef scope]
Link: https://lore.kernel.org/all/SN6PR02MB4157931105FA68D72E3D3DB8D47B2@SN6PR02MB4157.namprd02.prod.outlook.com/T/#u
Link: https://lkml.kernel.org/r/20240124051254.67105-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: bcc80dec91 ("x86/hyperv: Fix hv tsc page based sched_clock for hibernation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7fa0da5373 upstream.
The hypercall page is no longer needed. It can be removed, as from the
Xen perspective it is optional.
But, from Linux's perspective, it removes naked RET instructions that
escape the speculative protections that Call Depth Tracking and/or
Untrain Ret are trying to achieve.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4845bb638 upstream.
Add generic hypercall functions usable for all normal (i.e. not iret)
hypercalls. Depending on the guest type and the processor vendor
different functions need to be used due to the to be used instruction
for entering the hypervisor:
- PV guests need to use syscall
- HVM/PVH guests on Intel need to use vmcall
- HVM/PVH guests on AMD and Hygon need to use vmmcall
As PVH guests need to issue hypercalls very early during boot, there
is a 4th hypercall function needed for HVM/PVH which can be used on
Intel and AMD processors. It will check the vendor type and then set
the Intel or AMD specific function to use via static_call().
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2796dff62 upstream.
Instead of jumping to the Xen hypercall page for doing the iret
hypercall, directly code the required sequence in xen-asm.S.
This is done in preparation of no longer using hypercall page at all,
as it has shown to cause problems with speculation mitigations.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9221222c71 upstream.
When running as a Xen PV dom0 the system needs to map ACPI data of the
host using host physical addresses, while those addresses can conflict
with the guest physical addresses of the loaded linux kernel. The same
problem might apply in case a PV guest is configured to use the host
memory map.
This conflict can be solved by mapping the ACPI data to a different
guest physical address, but mapping the data via acpi_os_ioremap()
must still be possible using the host physical address, as this
address might be generated by AML when referencing some of the ACPI
data.
When configured to support running as a Xen PV domain, have an
implementation of acpi_os_ioremap() being aware of the possibility to
need above mentioned translation of a host physical address to the
guest physical address.
This modification requires to #include linux/acpi.h in some sources
which need to include asm/acpi.h directly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4498ae316 upstream.
Move the checks for e820 memory map conflicts using the
xen_chk_is_e820_usable() helper further up in order to prepare
resolving some of the possible conflicts by doing some e820 map
modifications, which must happen before evaluating the RAM layout.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit be35d91c88 ]
In order to minimize required special handling for running as Xen PV
dom0, the memory layout is modified to match that of the host. This
requires to have only RAM at the locations where Xen allocated memory
is living. Unfortunately there seem to be some machines, where ACPI
NVS is located at 64 MB, resulting in a conflict with the loaded
kernel or the initial page tables built by Xen.
Avoid this conflict by swapping the ACPI NVS area in the memory map
with unused RAM. This is possible via modification of the dom0 P2M map.
Accesses to the ACPI NVS area are done either for saving and restoring
it across suspend operations (this will work the same way as before),
or by ACPI code when NVS memory is referenced from other ACPI tables.
The latter case is handled by a Xen specific indirection of
acpi_os_ioremap().
While the E820 map can (and should) be modified right away, the P2M
map can be updated only after memory allocation is working, as the P2M
map might need to be extended.
Fixes: 808fdb7193 ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d05208cf7f ]
When running as a Xen PV dom0 it can happen that the kernel is being
loaded to a guest physical address conflicting with the host memory
map.
In order to be able to resolve this conflict, add the capability to
remap non-RAM areas to different guest PFNs. A function to use this
remapping information for other purposes than doing the remap will be
added when needed.
As the number of conflicts should be rather low (currently only
machines with max. 1 conflict are known), save the remap data in a
small statically allocated array.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: be35d91c88 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43dc2a0f47 ]
Instead of having max_pfn as a local variable of xen_memory_setup(),
make it a static variable in setup.c instead. This avoids having to
pass it to subfunctions, which will be needed in more cases in future.
Rename it to ini_nr_pages, as the value denotes the currently usable
number of memory pages as passed from the hypervisor at boot time.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: be35d91c88 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba88829706 ]
When booting as a Xen PV dom0 the memory layout of the dom0 is
modified to match that of the host, as this requires less changes in
the kernel for supporting Xen.
There are some cases, though, which are problematic, as it is the Xen
hypervisor selecting the kernel's load address plus some other data,
which might conflict with the host's memory map.
These conflicts are detected at boot time and result in a boot error.
In order to support handling at least some of these conflicts in
future, introduce a generic helper function which will later gain the
ability to adapt the memory layout when possible.
Add the missing check for the xen_start_info area.
Note that possible p2m map and initrd memory conflicts are handled
already by copying the data to memory areas not conflicting with the
memory map. The initial stack allocated by Xen doesn't need to be
checked, as early boot code is switching to the statically allocated
initial kernel stack. Initial page tables and the kernel itself will
be handled later.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: be35d91c88 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8432ac802 ]
We have some very fancy min/max macros that have tons of sanity checking
to warn about mixed signedness etc.
This is all things that a sane compiler should warn about, but there are
no sane compiler interfaces for this, and '-Wsign-compare' is broken [1]
and not useful.
So then we compensate (some would say over-compensate) by doing the
checks manually with some truly horrid macro games.
And no, we can't just use __builtin_types_compatible_p(), because the
whole question of "does it make sense to compare these two values" is a
lot more complicated than that.
For example, it makes a ton of sense to compare unsigned values with
simple constants like "5", even if that is indeed a signed type. So we
have these very strange macros to try to make sensible type checking
decisions on the arguments to 'min()' and 'max()'.
But that can cause enormous code expansion if the min()/max() macros are
used with complicated expressions, and particularly if you nest these
things so that you get the first big expansion then expanded again.
The xen setup.c file ended up ballooning to over 50MB of preprocessed
noise that takes 15s to compile (obviously depending on the build host),
largely due to one single line.
So let's split that one single line to just be simpler. I think it ends
up being more legible to humans too at the same time. Now that single
file compiles in under a second.
Reported-and-reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/c83c17bb-be75-4c67-979d-54eee38774c6@lucifer.local/
Link: https://staticthinking.wordpress.com/2023/07/25/wsign-compare-is-garbage/ [1]
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: be35d91c88 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fac1bceeeb ]
When running as a Xen PV dom0 the kernel is loaded by the hypervisor
using a different memory map than that of the host. In order to
minimize the required changes in the kernel, the kernel adapts its
memory map to that of the host. In order to do that it is checking
for conflicts of its load address with the host memory map.
Unfortunately the tested memory range does not include the .brk
area, which might result in crashes or memory corruption when this
area does conflict with the memory map of the host.
Fix the test by using the _end label instead of __bss_stop.
Fixes: 808fdb7193 ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6aa4eb994 ]
Commit 262fc47ac1 ('xen/balloon: don't use PV mode extra memory for zone
device allocations') removed the addition of the extra memory ranges to the
unpopulated range allocator, using those only for the balloon driver.
This forces the unpopulated allocator to attach hotplug ranges even when spare
memory (as part of the extra memory ranges) is available. Furthermore, on PVH
domains it defeats the purpose of commit 38620fc4e8 ('x86/xen: attempt to
inflate the memory balloon on PVH'), as extra memory ranges would only be
used to map foreign memory if the kernel is built without XEN_UNPOPULATED_ALLOC
support.
Fix this by adding a helpers that adds the extra memory ranges to the list of
unpopulated pages, and zeroes the ranges so they are not also consumed by the
balloon driver.
This should have been part of 38620fc4e8, hence the fixes tag.
Note the current logic relies on unpopulated_init() (and hence
arch_xen_unpopulated_init()) always being called ahead of balloon_init(), so
that the extra memory regions are consumed by arch_xen_unpopulated_init().
Fixes: 38620fc4e8 ('x86/xen: attempt to inflate the memory balloon on PVH')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240429155053.72509-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38620fc4e8 ]
When running as PVH or HVM Linux will use holes in the memory map as scratch
space to map grants, foreign domain pages and possibly miscellaneous other
stuff. However the usage of such memory map holes for Xen purposes can be
problematic. The request of holesby Xen happen quite early in the kernel boot
process (grant table setup already uses scratch map space), and it's possible
that by then not all devices have reclaimed their MMIO space. It's not
unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO
window memory, which (as expected) causes quite a lot of issues in the system.
At least for PVH dom0 we have the possibility of using regions marked as
UNUSABLE in the e820 memory map. Either if the region is UNUSABLE in the
native memory map, or it has been converted into UNUSABLE in order to hide RAM
regions from dom0, the second stage translation page-tables can populate those
areas without issues.
PV already has this kind of logic, where the balloon driver is inflated at
boot. Re-use the current logic in order to also inflate it when running as
PVH. onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to
RAM, while reserving them using xen_add_extra_mem() (which is also moved so
it's no longer tied to CONFIG_PV).
[jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH]
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240220174341.56131-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a845e0f63 ]
pud_large() is always defined as pud_leaf(). Merge their usages. Chose
pud_leaf() because pud_leaf() is a global API, while pud_large() is not.
Link: https://lkml.kernel.org/r/20240305043750.93762-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: c567f2948f ("Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped."")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3693bb4465 ]
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93cd059764 ]
Xen only supports modern CPUs even when running a 32-bit kernel, and it now
requires a kernel built for a 64 byte (or larger) cache line:
In file included from <command-line>:
In function 'xen_vcpu_setup',
inlined from 'xen_vcpu_setup_restore' at arch/x86/xen/enlighten.c:111:3,
inlined from 'xen_vcpu_restore' at arch/x86/xen/enlighten.c:141:3:
include/linux/compiler_types.h:435:45: error: call to '__compiletime_assert_287' declared with attribute error: BUILD_BUG_ON failed: sizeof(*vcpup) > SMP_CACHE_BYTES
arch/x86/xen/enlighten.c:166:9: note: in expansion of macro 'BUILD_BUG_ON'
166 | BUILD_BUG_ON(sizeof(*vcpup) > SMP_CACHE_BYTES);
| ^~~~~~~~~~~~
Enforce the dependency with a whitelist of CPU configurations. In normal
distro kernels, CONFIG_X86_GENERIC is enabled, and this works fine. When this
is not set, still allow Xen to be built on kernels that target a 64-bit
capable CPU.
Fixes: db2832309a ("x86/xen: fix percpu vcpu_info allocation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20231204084722.3789473-1-arnd@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ upstream commit be5341eb0d ]
There is no real reason to have a separate ASM entry point implementation
for the legacy INT 0x80 syscall emulation on 64-bit.
IDTENTRY provides all the functionality needed with the only difference
that it does not:
- save the syscall number (AX) into pt_regs::orig_ax
- set pt_regs::ax to -ENOSYS
Both can be done safely in the C code of an IDTENTRY before invoking any of
the syscall related functions which depend on this convention.
Aside of ASM code reduction this prepares for detecting and handling a
local APIC injected vector 0x80.
[ kirill.shutemov: More verbose comments ]
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db2832309a ]
Today the percpu struct vcpu_info is allocated via DEFINE_PER_CPU(),
meaning that it could cross a page boundary. In this case registering
it with the hypervisor will fail, resulting in a panic().
This can easily be fixed by using DEFINE_PER_CPU_ALIGNED() instead,
as struct vcpu_info is guaranteed to have a size of 64 bytes, matching
the cache line size of x86 64-bit processors (Xen doesn't support
32-bit processors).
Fixes: 5ead97c84f ("xen: Core Xen implementation")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.con>
Link: https://lore.kernel.org/r/20231124074852.25161-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
`efi_loader_signature` has space for 4 bytes. We are copying "Xen" (3 bytes)
plus a NUL-byte which makes 4 total bytes. With that being said, there is
currently not a bug with the current `strncpy()` implementation in terms of
buffer overreads but we should favor a more robust string interface
either way.
A suitable replacement is `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer while being functionally the
same in this case.
Link: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings[1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230911-strncpy-arch-x86-xen-efi-c-v1-1-96ab2bba2feb@google.com
Signed-off-by: Juergen Gross <jgross@suse.com>
When running as a paravirtualized guest under Xen, Linux is using
"lazy mode" for issuing hypercalls which don't need to take immediate
effect in order to improve performance (examples are e.g. multiple
PTE changes).
There are two different lazy modes defined: MMU and CPU lazy mode.
Today it is not possible to nest multiple lazy mode sections, even if
they are of the same kind. A recent change in memory management added
nesting of MMU lazy mode sections, resulting in a regression when
running as Xen PV guest.
Technically there is no reason why nesting of multiple sections of the
same kind of lazy mode shouldn't be allowed. So add support for that
for fixing the regression.
Fixes: bcc6cc8325 ("mm: add default definition of set_ptes()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230913113828.18421-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Only Xen is using the paravirt lazy mode code, so it can be moved to
Xen specific sources.
This allows to make some of the functions static or to merge them into
their only call sites.
While at it do a rename from "paravirt" to "xen" for all moved
specifiers.
No functional change.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230913113828.18421-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
There are several functions involved for performing the functionality
of evtchn_do_upcall():
- __xen_evtchn_do_upcall() doing the real work
- xen_hvm_evtchn_do_upcall() just being a wrapper for
__xen_evtchn_do_upcall(), exposed for external callers
- xen_evtchn_do_upcall() calling __xen_evtchn_do_upcall(), too, but
without any user
Simplify this maze by:
- removing the unused xen_evtchn_do_upcall()
- removing xen_hvm_evtchn_do_upcall() as the only left caller of
__xen_evtchn_do_upcall(), while renaming __xen_evtchn_do_upcall() to
xen_evtchn_do_upcall()
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Convert IBT selftest to asm to fix objtool warning
-----BEGIN PGP SIGNATURE-----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=3UUm
-----END PGP SIGNATURE-----
Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
coalescing lots of silly duplicates.
* Use static_calls() instead of indirect calls for apic->foo()
* Tons of cleanups an crap removal along the way
-----BEGIN PGP SIGNATURE-----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=eoKm
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
-----BEGIN PGP SIGNATURE-----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=kVVr
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-maping updates from Christoph Hellwig:
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: optimize get_max_slots()
swiotlb: move slot allocation explanation comment where it belongs
swiotlb: search the software IO TLB only if the device makes use of it
swiotlb: allocate a new memory pool when existing pools are full
swiotlb: determine potential physical address limit
swiotlb: if swiotlb is full, fall back to a transient memory pool
swiotlb: add a flag whether SWIOTLB is allowed to grow
swiotlb: separate memory pool data from other allocator data
swiotlb: add documentation and rename swiotlb_do_find_slots()
swiotlb: make io_tlb_default_mem local to swiotlb.c
swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
dma-contiguous: check for memory region overlap
dma-contiguous: support numa CMA for specified node
dma-contiguous: support per-numa CMA for all architectures
dma-mapping: move arch_dma_set_mask() declaration to header
swiotlb: unexport is_swiotlb_active
x86: always initialize xen-swiotlb when xen-pcifront is enabling
xen/pci: add flag for PCI passthrough being possible
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
- Update the ACPICA code in the kernel to upstream revision 20230628
including the following changes:
* Suppress a GCC 12 dangling-pointer warning (Philip Prindeville).
* Reformat the ACPI_STATE_COMMON macro and its users (George Guo).
* Replace the ternary operator with ACPI_MIN() (Jiangshan Yi).
* Add support for _DSC as per ACPI 6.5 (Saket Dumbre).
* Remove a duplicate macro from zephyr header (Najumon B.A).
* Add data structures for GED and _EVT tracking (Jose Marinho).
* Fix misspelled CDAT DSMAS define (Dave Jiang).
* Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet).
* Add a struct size macro related to SRAT (Dave Jiang).
* Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar).
* Add support for RISC-V external interrupt controllers in MADT (Sunil
V L).
* Add RHCT flags, CMO and MMU nodes (Sunil V L).
* Change ACPICA version to 20230628 (Bob Moore).
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers instead
of the ACPI bus type .notify() slated for removal (Michal Wilczynski).
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans
de Goede).
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng).
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby).
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip point
structures to the core during initialization (Rafael Wysocki).
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu).
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui).
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions (Xiaochun
Lee).
- Remove assorted unused declarations of functions (Yue Haibing).
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla).
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko).
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L).
-----BEGIN PGP SIGNATURE-----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=aXc6
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include new ACPICA material, a rework of the ACPI thermal
driver, a switch-over of the ACPI processor driver to using _OSC
instead of (long deprecated) _PDC for CPU initialization, a rework of
firmware notifications handling in several drivers, fixes and cleanups
for suspend-to-idle handling on AMD systems, ACPI backlight driver
updates and more.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230628
including the following changes:
- Suppress a GCC 12 dangling-pointer warning (Philip Prindeville)
- Reformat the ACPI_STATE_COMMON macro and its users (George Guo)
- Replace the ternary operator with ACPI_MIN() (Jiangshan Yi)
- Add support for _DSC as per ACPI 6.5 (Saket Dumbre)
- Remove a duplicate macro from zephyr header (Najumon B.A)
- Add data structures for GED and _EVT tracking (Jose Marinho)
- Fix misspelled CDAT DSMAS define (Dave Jiang)
- Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet)
- Add a struct size macro related to SRAT (Dave Jiang)
- Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar)
- Add support for RISC-V external interrupt controllers in MADT
(Sunil V L)
- Add RHCT flags, CMO and MMU nodes (Sunil V L)
- Change ACPICA version to 20230628 (Bob Moore)
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers
instead of the ACPI bus type .notify() slated for removal (Michal
Wilczynski)
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
(Hans de Goede)
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng)
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby)
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao)
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification
in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki)
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello)
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip
point structures to the core during initialization (Rafael Wysocki)
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong
Wu)
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui)
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions
(Xiaochun Lee)
- Remove assorted unused declarations of functions (Yue Haibing)
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla)
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko)
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L)"
* tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits)
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
ACPI: Remove assorted unused declarations of functions
ACPI: extlog: Fix finding the generic error data for v3 structure
PNP: ACPI: Fix string truncation warning
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
...
Merge ACPI processor driver changes for 6.6-rc1:
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
* acpi-processor:
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: processor: Refine messages in acpi_early_processor_control_setup()
ACPI: processor: Remove acpi_hwp_native_thermal_lvt_osc()
ACPI: processor: Use _OSC to convey OSPM processor support information
ACPI: processor: Introduce acpi_processor_osc()
ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()
ACPI: processor: Clear C_C2C3_FFH and C_C1_FFH in arch_acpi_set_proc_cap_bits()
ACPI: processor: Rename ACPI_PDC symbols
ACPI: processor: Refactor arch_acpi_set_pdc_bits()
ACPI: processor: Move processor_physically_present() to acpi_processor.c
ACPI: processor: Move MWAIT quirk out of acpi_processor.c
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
Also fix all offending call sites to pass a (void *) rather
than an unsigned long. Since virt_to_mfn() is wrapping
virt_to_pfn() this function has become polymorphic as well
so the usage need to be fixed up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230810-virt-to-phys-x86-xen-v1-1-9e966d333e7a@linaro.org
Signed-off-by: Juergen Gross <jgross@suse.com>
After removing the conditional return from xen_create_contiguous_region(),
the accompanying comment was left in place, but it now precedes an
unrelated conditional and confuses readers.
Fixes: 989513a735 ("xen: cleanup pvh leftovers from pv-only sources")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230802163151.1486-1-petrtesarik@huaweicloud.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Nothing can change it post init.
Remove the 32bit callbacks and comments as XENPV is strictly 64bit.
While at it mop up the whitespace damage which causes eyebleed due to an
editor which is highlighting it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
Cc: Juergen Gross <jgross@suse.com>
Instead of setting the Xen PV apic driver very early during boot, just use
the standard apic driver probing by setting an appropriate
x86_init.irqs.intr_mode_init callback.
At the same time eliminate xen_apic_check() which has never been used.
The #ifdef CONFIG_X86_LOCAL_APIC around the call of xen_init_apic()
can be removed, too, as CONFIG_XEN depends on CONFIG_X86_LOCAL_APIC.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
Link: https://lore.kernel.org/lkml/aa086365-fd02-210f-67c6-5c9175c0dfee@suse.com
In preparation for converting the hotpath APIC callbacks to static keys,
provide common initialization infrastructure.
Lift apic_install_drivers() from probe_64.c and convert all places which
switch the apic instance by storing the pointer to use apic_install_driver()
as a first step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
Yet another wrapper of a wrapper gone along with the outdated comment
that this compiles to a single instruction.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
Every callsite hands in the same constants which is a pointless exercise
and cannot be optimized by the compiler due to the indirect calls.
Use the constants in the eoi() callbacks and remove the arguments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
Now that everything has apic::max_apic_id set and the eventual update for
the x2APIC case is in place, switch the apic_id_valid() helper to use
apic::max_apic_id and remove the apic::apic_id_valid() callback.
[ dhansen: Fix subject typo ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
There is really no point to have a callback which compares numbers.
Add a field which allows each APIC to store the maximum APIC ID supported
and fill it in for all APIC incarnations.
The next step will remove the callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
Remove tons of NOOP callbacks by making the invocation of
safe_wait_icr_idle() conditional in the inline wrapper.
Will be replaced by a static_call_cond() later.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
