commit 0d7597749f upstream.
When KCOV or GCOV is enabled, dead code can be left behind, in which
case objtool silences unreachable and undefined behavior (fallthrough)
warnings.
Fallthrough warnings, and their variant "end of section" warnings, were
silenced with the following commit:
6b023c7842 ("objtool: Silence more KCOV warnings")
Another variant of a fallthrough warning is a jump to the end of a
function. If that function happens to be at the end of a section, the
jump destination doesn't actually exist.
Normally that would be a fatal objtool error, but for KCOV/GCOV it's
just another undefined behavior fallthrough. Silence it like the
others.
Fixes the following warning:
drivers/iommu/dma-iommu.o: warning: objtool: iommu_dma_sw_msi+0x92: can't find jump dest instruction at .text+0x54d5
Fixes: 6b023c7842 ("objtool: Silence more KCOV warnings")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/08fbe7d7e1e20612206f1df253077b94f178d93e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/314f8809-cd59-479b-97d7-49356bf1c8d1@infradead.org/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 197c1eaa7b ]
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72070e57b0 ]
Commit 57ed58c132 ("selftests: ublk: enable zero copy for stripe target")
added test entry of test_stripe_04, but forgot to add the test script.
So fix the test by adding the script file.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250404001849.1443064-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b023c7842 ]
In the past there were issues with KCOV triggering unreachable
instruction warnings, which is why unreachable warnings are now disabled
with CONFIG_KCOV.
Now some new KCOV warnings are showing up with GCC 14:
vmlinux.o: warning: objtool: cpuset_write_resmask() falls through to next function cpuset_update_active_cpus.cold()
drivers/usb/core/driver.o: error: objtool: usb_deregister() falls through to next function usb_match_device()
sound/soc/codecs/snd-soc-wcd934x.o: warning: objtool: .text.wcd934x_slim_irq_handler: unexpected end of section
All are caused by GCC KCOV not finishing an optimization, leaving behind
a never-taken conditional branch to a basic block which falls through to
the next function (or end of section).
At a high level this is similar to the unreachable warnings mentioned
above, in that KCOV isn't fully removing dead code. Treat it the same
way by adding these to the list of warnings to ignore with CONFIG_KCOV.
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/66a61a0b65d74e072d3dc02384e395edb2adc3c5.1742852846.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/Z9iTsI09AEBlxlHC@gmail.com
Closes: https://lore.kernel.org/oe-kbuild-all/202503180044.oH9gyPeg-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02a4694107 ]
We are missing setting error code in do_loader() when
bpf_object__open_file() fails. This means the command's exit status code
will be successful, even though the operation failed. So make sure to
return the correct error code. To maintain consistency with other
locations where bpf_object__open_file() is called, return -1.
[0] Closes: https://github.com/libbpf/bpftool/issues/156
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sewon Nam <swnam0729@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/d3b5b4b4-19bb-4619-b4dd-86c958c4a367@stanley.mountain/t/#u
Link: https://lore.kernel.org/bpf/20250311031238.14865-1-swnam0729@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 15383a0d63 upstream.
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b435 ("landlock: Enable user space to infer supported features")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9369777c29 upstream.
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
wait_local_port_listen() helper is defined in diag.sh, mptcp_connect.sh,
mptcp_join.sh and simult_flows.sh, export it into mptcp_lib.sh and
rename it with mptcp_lib_ prefix. Use this new helper in all these
scripts.
Note: We only have IPv4 connections in this helper, not looking at IPv6
(tcp6) but that's OK because we only have IPv4 connections here in diag.sh.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-15-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5afca7e996 ("selftests: mptcp: join: test for prohibited MPC to port-based endp")
[ Conflict in diag.sh, because commit 1f24ba67ba ("selftests: mptcp:
diag: check CURRESTAB counters") that is more recent that the one
here, has been backported in this kernel version before, introducing
chk_msk_cestab() helper in the same context. wait_local_port_listen()
was still the same as in the original, and can then be simply removed
from diag.sh. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c02223e2d upstream.
Currently if the filesystem for the cgroups version it wants to use is not
mounted charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh tests
will attempt to mount it on the hard coded path /dev/cgroup/memory,
deleting that directory when the test finishes. This will fail if there
is not a preexisting directory at that path, and since the directory is
deleted subsequent runs of the test will fail. Instead of relying on this
hard coded directory name use mktemp to generate a temporary directory to
use as a mountpoint, fixing both the assumption and the disruption caused
by deleting a preexisting directory.
This means that if the relevant cgroup filesystem is not already mounted
then we rely on having coreutils (which provides mktemp) installed. I
suspect that many current users are relying on having things automounted
by default, and given that the script relies on bash it's probably not an
unreasonable requirement.
Link: https://lkml.kernel.org/r/20250404-kselftest-mm-cgroup2-detection-v1-1-3dba6d32ba8c@kernel.org
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b26c1a85f3 ]
The default SH kunit configuration sets CONFIG_CMDLINE_OVERWRITE which
completely disregards the cmdline passed from the bootloader/QEMU in favor
of the builtin CONFIG_CMDLINE.
However the kunit tool needs to pass arguments to the in-kernel kunit core,
for filters and other runtime parameters.
Enable CONFIG_CMDLINE_EXTEND instead, so kunit arguments are respected.
Link: https://lore.kernel.org/r/20250407-kunit-sh-v1-1-f5432a54cf2f@linutronix.de
Fixes: 8110a3cab0 ("kunit: tool: Add support for SH under QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a30951d09c ]
On 32-bit, we can't use %lu to print a size_t variable and gcc warns us
about it. Shame it doesn't warn about it on 64-bit.
Link: https://lkml.kernel.org/r/20250403003311.359917-1-Liam.Howlett@oracle.com
Fixes: cc86e0c2f3 ("radix tree test suite: add support for slab bulk APIs")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7335d4ac81 upstream.
Fix a bug where the code was checking the wrong file descriptors
when opening the input files. The code was checking 'fd' instead
of 'fd_in', which could lead to incorrect error handling.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Fixes: ca7ae89160 ("selftests: mptcp: mptfo Initiator/Listener")
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-2-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c183165f87 upstream.
The file descriptor 'fd_in' is opened when cfg_input is configured, but
not closed in main_loop(), this patch fixes it.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Co-developed-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-3-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 208baa3ec9 ]
If malloc returns NULL due to low memory, 'config' pointer can be NULL.
Add a check to prevent NULL dereference.
Link: https://lore.kernel.org/r/20250219122715.3892223-1-quic_zhonhan@quicinc.com
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8df7d0ef9 ]
The !CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat() ends
with a SYSCALL instruction which is classified by objtool as
INSN_CONTEXT_SWITCH.
Unlike validate_branch(), validate_unret() doesn't consider
INSN_CONTEXT_SWITCH in a non-function to be a dead end, so it keeps
going past the end of xen_entry_SYSCALL_compat(), resulting in the
following warning:
vmlinux.o: warning: objtool: xen_reschedule_interrupt+0x2a: RET before UNTRAIN
Fix that by adding INSN_CONTEXT_SWITCH handling to validate_unret() to
match what validate_branch() is already doing.
Fixes: a09a6e2399 ("objtool: Add entry UNRET validation")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/f5eda46fd09f15b1f5cde3d9ae3b92b958342add.1744095216.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d50e00fef ]
Testcase should fail if -EWOULDBLOCK is not returned when expected value
differs from actual value from the waiter.
Link: https://lore.kernel.org/r/20250404221225.1596324-1-edliaw@google.com
Fixes: 9d57f7c797 ("selftests: futex: Test sys_futex_waitv() wouldblock")
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a352a90e8 ]
Annotate so it is built with non-executable stack.
Fixes: 8b97519711 ("perf test: Add asm pureloop test tool")
Signed-off-by: Marcus Meissner <meissner@suse.de>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250323085410.23751-1-meissner@suse.de
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89aaeaf842 ]
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
$ pahole -C pyrf_event /tmp/build/perf-tools-next/python/perf.cpython-312-x86_64-linux-gnu.so
struct pyrf_event {
PyObject ob_base; /* 0 16 */
struct evsel * evsel; /* 16 8 */
struct perf_sample sample; /* 24 312 */
/* XXX last struct has 7 bytes of padding, 2 holes */
/* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */
union perf_event event; /* 336 4168 */
/* size: 4504, cachelines: 71, members: 4 */
/* member types with holes: 1, total: 2 */
/* paddings: 1, sum paddings: 7 */
/* last cacheline: 24 bytes */
};
$
It was doing so without checking if the event just obtained has more
than that space, fix it.
This isn't a proper, final solution, as we need to support larger
events, but for the time being we at least bounds check and document it.
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-7-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3fed3ae34 ]
When processing tracepoints the perf python binding was parsing the
event before calling perf_mmap__consume(&md->core) in
pyrf_evlist__read_on_cpu().
But part of this event parsing was to set the perf_sample->raw_data
pointer to the payload of the event, which then could be overwritten by
other event before tracepoint fields were asked for via event.prev_comm
in a python program, for instance.
This also happened with other fields, but strings were were problems
were surfacing, as there is UTF-8 validation for the potentially garbled
data.
This ended up showing up as (with some added debugging messages):
( field 'prev_comm' ret=0x7f7c31f65110, raw_size=68 ) ( field 'prev_pid' ret=0x7f7c23b1bed0, raw_size=68 ) ( field 'prev_prio' ret=0x7f7c239c0030, raw_size=68 ) ( field 'prev_state' ret=0x7f7c239c0250, raw_size=68 ) time 14771421785867 prev_comm= prev_pid=1919907691 prev_prio=796026219 prev_state=0x303a32313175 ==>
( XXX '��' len=16, raw_size=68) ( field 'next_comm' ret=(nil), raw_size=68 ) Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 51, in <module>
main()
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 46, in main
event.next_comm,
^^^^^^^^^^^^^^^
AttributeError: 'perf.sample_event' object has no attribute 'next_comm'
When event.next_comm was asked for, the PyUnicode_FromString() python
API would fail and that tracepoint field wouldn't be available, stopping
the tools/perf/python/tracepoint.py test tool.
But, since we already do a copy of the whole event in pyrf_event__new,
just use it and while at it remove what was done in in e8968e6541
("perf python: Fix pyrf_evlist__read_on_cpu event consuming") because we
don't really need to wait for parsing the sample before declaring the
event as consumed.
This copy is questionable as is now, as it limits the maximum event +
sample_type and tracepoint payload to sizeof(union perf_event), this all
has been "working" because 'struct perf_event_mmap2', the largest entry
in 'union perf_event' is:
$ pahole -C perf_event ~/bin/perf | grep mmap2
struct perf_record_mmap2 mmap2; /* 0 4168 */
$
Fixes: bae57e3825 ("perf python: Add support to resolve tracepoint fields")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-6-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de5a2bf5b ]
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db1 ("perf python: Add struct evsel into struct pyrf_event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1376c195e8 ]
Some old cut'n'paste error, its "ip", so the description should be
"event ip", not "event type".
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf67629f7f ]
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
Fixes: 9808143ba2 ("perf tools: Add unit_number__scnprintf function")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe0ce8a9d8 ]
Over various refactorings evlist__create_syswide_maps has been made to
only ever return with -ENOMEM. Fix this so that when
perf_evlist__set_maps is successfully called, 0 is returned.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250228222308.626803-3-irogers@google.com
Fixes: 8c0498b689 ("perf evlist: Fix create_syswide_maps() not propagating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1d47850bb ]
The ARM_SPE_OP_LD and ARM_SPE_OP_ST operations are secondary operation
type, they are overlapping with other second level's operation types
belonging to SVE and branch operations. As a result, a non load-store
operation can be parsed for data source and memory sample.
To fix the issue, this commit introduces a is_ldst_op() macro for
checking LDST operation, and apply the checking when synthesize data
source and memory samples.
Fixes: a89dbc9b98 ("perf arm-spe: Set sample's data source field")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250304111240.3378214-7-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9d699e10f ]
After pmu_add_cpu_aliases() is called, perf_pmu__num_events() returns an
incorrect value that double counts common events and doesn't match the
actual count of events in the alias list. This is because after
'cpu_aliases_added == true', the number of events returned is
'sysfs_aliases + cpu_json_aliases'. But when adding 'case
EVENT_SRC_SYSFS' events, 'sysfs_aliases' and 'cpu_json_aliases' are both
incremented together, failing to account that these ones overlap and
only add a single item to the list. Fix it by adding another counter for
overlapping events which doesn't influence 'cpu_json_aliases'.
There doesn't seem to be a current issue because it's used in perf list
before pmu_add_cpu_aliases() so the correct value is returned. Other
uses in tests may also miss it for other reasons like only looking at
uncore events. However it's marked as a fixes commit in case any new fix
with new uses of perf_pmu__num_events() is backported.
Fixes: d9c5f5f94c ("perf pmu: Count sys and cpuid JSON events separately")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250226104111.564443-3-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ce0d2da14 ]
Legacy events typically don't have a PMU when added leading to
mismatched legacy/non-legacy cases in find_stat. Use evsel__find_pmu
to make sure the evsel PMU is looked up. Update the evsel__find_pmu
code to look for the PMU using the extended config type or, for legacy
hardware/hw_cache events on non-hybrid systems, just use the core PMU.
Before:
```
$ perf stat -e cycles,cpu/instructions/ -a sleep 1
Performance counter stats for 'system wide':
215,309,764 cycles
44,326,491 cpu/instructions/
1.002555314 seconds time elapsed
```
After:
```
$ perf stat -e cycles,cpu/instructions/ -a sleep 1
Performance counter stats for 'system wide':
990,676,332 cycles
1,235,762,487 cpu/instructions/ # 1.25 insn per cycle
1.002667198 seconds time elapsed
```
Fixes: 3612ca8e29 ("perf stat: Fix the hard-coded metrics calculation on the hybrid")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250109222109.567031-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4107a1aeb2 ]
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/cf1f61468b47425ecf3728689bc9636ddd1d910e.1738302337.git.skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de07b18289 ]
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8b ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0525cd72b ]
Fix theoretical NULL dereference in linker when resolving *extern*
STT_SECTION symbol against not-yet-existing ELF section. Not sure if
it's possible in practice for valid ELF object files (this would require
embedded assembly manipulations, at which point BTF will be missing),
but fix the s/dst_sym/dst_sec/ typo guarding this condition anyways.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Fixes: a46349227c ("libbpf: Add linker extern resolution support for functions and global variables")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250220002821.834400-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8085fcd78c ]
The CONFIG_X86_ESPFIX64 version of exc_double_fault() can return to its
caller, but the !CONFIG_X86_ESPFIX64 version never does. In the latter
case the compiler and/or objtool may consider it to be implicitly
noreturn.
However, due to the currently inflexible way objtool detects noreturns,
a function's noreturn status needs to be consistent across configs.
The current workaround for this issue is to suppress unreachable
warnings for exc_double_fault()'s callers. Unfortunately that can
result in ORC coverage gaps and potentially worse issues like inert
static calls and silently disabled CPU mitigations.
Instead, prevent exc_double_fault() from ever being implicitly marked
noreturn by forcing a return behind a never-taken conditional.
Until a more integrated noreturn detection method exists, this is likely
the least objectionable workaround.
Fixes: 55eeab2a8a ("objtool: Ignore exc_double_fault() __noreturn warnings")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/d1f4026f8dc35d0de6cc61f2684e0cb6484009d1.1741975349.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0c1114950 ]
SOCK_NONBLOCK flag is only effective during socket creation, not during
recv. Use MSG_DONTWAIT instead.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-5-mrpre@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 217f0b1e99 upstream.
When using rtla timerlat with userspace threads (-u or -U), rtla
disables the OSNOISE_WORKLOAD option in
/sys/kernel/tracing/osnoise/options. This option is not re-enabled in a
subsequent run with kernel-space threads, leading to rtla collecting no
results if the previous run exited abnormally:
$ rtla timerlat top -u
^\Quit (core dumped)
$ rtla timerlat top -k -d 1s
Timer Latency
0 00:00:01 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
The issue persists until OSNOISE_WORKLOAD is set manually by running:
$ echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
Set OSNOISE_WORKLOAD when running rtla with kernel-space threads if
available to fix the issue.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250107144823.239782-4-tglozar@redhat.com
Fixes: cdca4f4e5e ("rtla/timerlat_top: Add timerlat user-space support")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ params->kernel_workload does not exist in 6.6, use
!params->user_top ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8d866171a upstream.
When using rtla timerlat with userspace threads (-u or -U), rtla
disables the OSNOISE_WORKLOAD option in
/sys/kernel/tracing/osnoise/options. This option is not re-enabled in a
subsequent run with kernel-space threads, leading to rtla collecting no
results if the previous run exited abnormally:
$ rtla timerlat hist -u
^\Quit (core dumped)
$ rtla timerlat hist -k -d 1s
Index
over:
count:
min:
avg:
max:
ALL: IRQ Thr Usr
count: 0 0 0
min: - - -
avg: - - -
max: - - -
The issue persists until OSNOISE_WORKLOAD is set manually by running:
$ echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
Set OSNOISE_WORKLOAD when running rtla with kernel-space threads if
available to fix the issue.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250107144823.239782-3-tglozar@redhat.com
Fixes: ed774f7481 ("rtla/timerlat_hist: Add timerlat user-space support")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ params->kernel_workload does not exist in 6.6, use
!params->user_hist ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 83b74901bd.
The commit breaks rtla build, since params->kernel_workload is not
present on 6.6-stable.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 41955b6c26.
The commit breaks rtla build, since params->kernel_workload is not
present on 6.6-stable.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 713e788c0e upstream.
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes: 171586a6ab ("selftests/rseq: riscv: Template memory ordering and percpu access mode")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250114170721.3613280-1-shorne@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ec920bb97 upstream.
After the netdevsim update to use human-readable IP address formats for
IPsec, we can now use the source and destination IPs directly in testing.
Here is the result:
# ./rtnetlink.sh -t kci_test_ipsec_offload
PASS: ipsec_offload
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241010040027.21440-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7d3f3b4367 ]
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191b ("ipv4: use RCU protection in __ip_rt_update_pmtu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80967b354a ]
If either SIGINT is received twice, or after a SIGALRM (that is, after
timerlat was supposed to stop), abort processing events currently left
in the tracefs buffer and exit immediately.
This allows the user to exit rtla without waiting for processing all
events, should that take longer than wanted, at the cost of not
processing all samples.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6899e5603 ]
If either SIGINT is received twice, or after a SIGALRM (that is, after
timerlat was supposed to stop), abort processing events currently left
in the tracefs buffer and exit immediately.
This allows the user to exit rtla without waiting for processing all
events, should that take longer than wanted, at the cost of not
processing all samples.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The Fixes commit is a backport renaming a variable, from AF_INET6 to
MPTCP_LIB_AF_INET6.
The commit has been applied without conflicts, except that it missed one
extra variable that was in v6.6, but not in the version linked to the
Fixes commit.
This variable has then been renamed too to avoid these errors:
LISTENER_CREATED 10.0.2.1:10100 ./mptcp_join.sh: line 2944: [: 2: unary operator expected
LISTENER_CLOSED 10.0.2.1:10100 ./mptcp_join.sh: line 2944: [: 2: unary operator expected
Fixes: a17d141912 ("selftests: mptcp: declare event macros in mptcp_lib")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4dfce7559 upstream.
Currently, when either SIGINT from the user or SIGALRM from the duration
timer is caught by rtla-timerlat, stop_tracing is set to break out of
the main loop. This is not sufficient for cases where the timerlat
tracer is producing more data than rtla can consume, since in that case,
rtla is looping indefinitely inside tracefs_iterate_raw_events, never
reaches the check of stop_tracing and hangs.
In addition to setting stop_tracing, also stop the timerlat tracer on
received signal (SIGINT or SIGALRM). This will stop new samples so that
the existing samples may be processed and tracefs_iterate_raw_events
eventually exits.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-4-tglozar@redhat.com
Fixes: a828cd18bc ("rtla: Add timerlat tool and timelart top mode")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c73cab9dbe upstream.
Currently, when either SIGINT from the user or SIGALRM from the duration
timer is caught by rtla-timerlat, stop_tracing is set to break out of
the main loop. This is not sufficient for cases where the timerlat
tracer is producing more data than rtla can consume, since in that case,
rtla is looping indefinitely inside tracefs_iterate_raw_events, never
reaches the check of stop_tracing and hangs.
In addition to setting stop_tracing, also stop the timerlat tracer on
received signal (SIGINT or SIGALRM). This will stop new samples so that
the existing samples may be processed and tracefs_iterate_raw_events
eventually exits.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-3-tglozar@redhat.com
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e879b5dcf8 upstream.
Support not only turning trace on for the timerlat tracer, but also
turning it off.
This will be used in subsequent patches to stop the timerlat tracer
without also wiping the trace buffer.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 217f0b1e99 upstream.
When using rtla timerlat with userspace threads (-u or -U), rtla
disables the OSNOISE_WORKLOAD option in
/sys/kernel/tracing/osnoise/options. This option is not re-enabled in a
subsequent run with kernel-space threads, leading to rtla collecting no
results if the previous run exited abnormally:
$ rtla timerlat top -u
^\Quit (core dumped)
$ rtla timerlat top -k -d 1s
Timer Latency
0 00:00:01 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
The issue persists until OSNOISE_WORKLOAD is set manually by running:
$ echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
Set OSNOISE_WORKLOAD when running rtla with kernel-space threads if
available to fix the issue.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250107144823.239782-4-tglozar@redhat.com
Fixes: cdca4f4e5e ("rtla/timerlat_top: Add timerlat user-space support")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8d866171a upstream.
When using rtla timerlat with userspace threads (-u or -U), rtla
disables the OSNOISE_WORKLOAD option in
/sys/kernel/tracing/osnoise/options. This option is not re-enabled in a
subsequent run with kernel-space threads, leading to rtla collecting no
results if the previous run exited abnormally:
$ rtla timerlat hist -u
^\Quit (core dumped)
$ rtla timerlat hist -k -d 1s
Index
over:
count:
min:
avg:
max:
ALL: IRQ Thr Usr
count: 0 0 0
min: - - -
avg: - - -
max: - - -
The issue persists until OSNOISE_WORKLOAD is set manually by running:
$ echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
Set OSNOISE_WORKLOAD when running rtla with kernel-space threads if
available to fix the issue.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250107144823.239782-3-tglozar@redhat.com
Fixes: ed774f7481 ("rtla/timerlat_hist: Add timerlat user-space support")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80d3ba1cf5 upstream.
osnoise_set_workload returns -1 for both missing OSNOISE_WORKLOAD option
and failure in setting the option.
Return -1 for missing and -2 for failure to distinguish them.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250107144823.239782-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5368a67307 upstream.
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc16632
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62892e77b8 upstream.
The comparison function cmpworker() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
Symmetry: If x < y, then y > x.
Transitivity: If x < y and y < z, then x < z.
In its current implementation, cmpworker() incorrectly returns 0 when
w1->tid < w2->tid, which breaks both symmetry and transitivity. This
violation causes undefined behavior, potentially leading to issues such
as memory corruption in glibc [1].
Fix the issue by returning -1 when w1->tid < w2->tid, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 121dd9ea01 ("perf bench: Add epoll parallel epoll_wait benchmark")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250116110842.4087530-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 235174b2be ]
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4e17a8f23 upstream.
In the case of a test that uses the special option ${KERNEL_VERSION} in one
of its settings but has no configuration available in ${OUTPUT_DIR}, for
example if it's a new empty directory, then the `make kernelrelease` call
will fail and the subroutine will chomp an empty string, silently. Fix that
by adding an empty configuration and retrying.
Cc: stable@vger.kernel.org
Cc: John Hawley <warthog9@eaglescrag.net>
Fixes: 5f9b6ced04 ("ktest: Bisecting, install modules, add logging")
Link: https://lore.kernel.org/20241205-ktest_kver_fallback-v2-1-869dae4c7777@suse.com
Signed-off-by: Ricardo B. Marliere <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 336d02bc4c upstream.
When porting librseq commit:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
from librseq to the kernel selftests, the following line was missed
at the end of rseq_init():
rseq_size = get_rseq_kernel_feature_size();
which effectively leaves rseq_size initialized to -1U when glibc does not
have rseq support. glibc supports rseq from version 2.35 onwards.
In a following librseq commit
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
to mimic the libc behavior, a new approach is taken: don't set the
feature size in 'rseq_size' until at least one thread has successfully
registered. This allows using 'rseq_size' in fast-paths to test for both
registration status and available features. The caveat is that on libc
either all threads are registered or none are, while with bare librseq
it is the responsability of the user to register all threads using rseq.
This combines the changes from the following librseq git commits:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
Fixes: a0cc649353 ("selftests/rseq: Fix mm_cid test failure")
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7b87ce0dd ]
libtraceevent parses and returns an array of argument fields, sometimes
larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr",
idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6
elements max, creating an out-of-bounds access. This runtime error is
found by UBsan. The error message:
$ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1
builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]'
#0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966
#1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110
#2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436
#3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897
#4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335
#5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502
#6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351
#7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404
#8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448
#9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556
#10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360
#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6)
0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1
Fixes: 5e58fcfaf4 ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint")
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be9264158 ]
`parse_lock_type` can only add the first lock flag in `lock_type_table`
given input `str`. For example, for `Y rwlock`, it only adds `rwlock:R`
into this perf session. Another example is for `-Y mutex`, it only adds
the mutex without `LCB_F_SPIN` flag. The patch fixes this issue, makes
sure both `rwlock:R` and `rwlock:W` will be added with `-Y rwlock`, and
so on.
Testing:
$ ./perf lock con -ab -Y mutex,rwlock -- perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 9.313 [sec]
9.313976 usecs/op
107365 ops/sec
contended total wait max wait avg wait type caller
176 1.65 ms 19.43 us 9.38 us mutex pipe_read+0x57
34 180.14 us 10.93 us 5.30 us mutex pipe_write+0x50
7 77.48 us 16.09 us 11.07 us mutex do_epoll_wait+0x24d
7 74.70 us 13.50 us 10.67 us mutex do_epoll_wait+0x24d
3 35.97 us 14.44 us 11.99 us rwlock:W ep_done_scan+0x2d
3 35.00 us 12.23 us 11.66 us rwlock:W do_epoll_wait+0x255
2 15.88 us 11.96 us 7.94 us rwlock:W do_epoll_wait+0x47c
1 15.23 us 15.23 us 15.23 us rwlock:W do_epoll_wait+0x4d0
1 14.26 us 14.26 us 14.26 us rwlock:W ep_done_scan+0x2d
2 14.00 us 7.99 us 7.00 us mutex pipe_read+0x282
1 12.29 us 12.29 us 12.29 us rwlock:R ep_poll_callback+0x35
1 12.02 us 12.02 us 12.02 us rwlock:W do_epoll_ctl+0xb65
1 10.25 us 10.25 us 10.25 us rwlock:R ep_poll_callback+0x35
1 7.86 us 7.86 us 7.86 us mutex do_epoll_ctl+0x6c1
1 5.04 us 5.04 us 5.04 us mutex do_epoll_ctl+0x3d4
[namhyung: Add a comment and rename to 'mutex:spin' for consistency
Fixes: d783ea8f62 ("perf lock contention: Simplify parse_lock_type()")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Cc: nick.forrington@arm.com
Link: https://lore.kernel.org/r/20250116235838.2769691-1-ctshao@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64a7617efd ]
When adding support for refconunt checking a cut'n'paste made this
function, that is just an accessor to a bool member of 'struct nsinfo',
return a pid_t, when that member is a boolean, fix it.
Fixes: bcaf0a9785 ("perf namespaces: Add functions to access nsinfo")
Reported-by: Francesco Nigro <fnigro@redhat.com>
Reported-by: Ilan Green <igreen@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20241206204828.507527-6-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c6a585d25 ]
When we're processing a perf.data file we will, for every thread in that
file do a machine__findnew_thread(machine, pid, tid) that when that pid
is seen for the first time will create a 'struct thread' representing
it.
That in turn will call nsinfo__new() -> nsinfo__init() and there it will
assume we're running live, which is wrong and will need to be addressed
in a followup patch.
The nsinfo__new() assumes that if we can't access that thread it has
already finished and will ignore the -1 return from nsinfo__init(), just
taking notes to avoid trying to enter in that namespace, since it isn't
there anymore, a race.
When doing this from 'perf inject', tho, we can fill in parts of that
nsinfo from what we get from the PERF_RECORD_MMAP2 (pid, tid) and in the
jitdump file name, that has the form of jit-<PID>.dump.
So if the pid in the jitdump file name is not the one in the
PERF_RECORD_MMAP2, we can assume that its the pid of the process
_inside_ the namespace, and that perf was runing outside that namespace.
This will be done in the following patch.
Reported-by: Francesco Nigro <fnigro@redhat.com>
Reported-by: Ilan Green <igreen@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20241206204828.507527-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 64a7617efd ("perf namespaces: Fixup the nsinfo__in_pidns() return type, its bool")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a93786c30 ]
Depending on how vmlinux.lds is written, _etext might be the very first
data symbol instead of the very last text symbol.
Don't require it to be a text symbol, accept any symbol type.
Comitter notes:
See the first Link for further discussion, but it all boils down to
this:
---
# grep -e _stext -e _etext -e _edata /proc/kallsyms
c0000000 T _stext
c08b8000 D _etext
So there is no _edata and _etext is not text
$ ppc-linux-objdump -x vmlinux | grep -e _stext -e _etext -e _edata
c0000000 g .head.text 00000000 _stext
c08b8000 g .rodata 00000000 _etext
c1378000 g .sbss 00000000 _edata
---
Fixes: ed9adb2035 ("perf machine: Read also the end of the kernel")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/b3ee1994d95257cb7f2de037c5030ba7d1bed404.1736327613.git.christophe.leroy@csgroup.eu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 058b38ccd2 ]
Recently we got a case where a kernel sample wasn't being resolved due
to a bug that was not setting the end address on kernel functions
implemented in assembly (see Link: tag), and then those were not being
found by machine__resolve() -> map__find_symbol().
So we ended up with:
# perf top --stdio
PerfTop: 0 irqs/s kernel: 0% exact: 0% lost: 0/0 drop: 0/0 [cycles/P]
-----------------------------------------------------------------------
Warning:
A vmlinux file was not found.
Kernel samples will not be resolved.
^Z
[1]+ Stopped perf top --stdio
#
But then resolving all other kernel symbols.
So just fixup the logic to only print that warning when there are no
symbols in the kernel map.
Fixes: d88205db9c ("perf dso: Add dso__has_symbols() method")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/lkml/Z3buKhcCsZi3_aGb@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 776735b954 ]
Since $output and $ret are not used in the subsequent code, the declarations
should be removed.
Fixes: a75fececff ("ktest: Added sample.conf, new %default option format")
Link: https://lore.kernel.org/20240902130735.6034-1-bajing@cmss.chinamobile.com
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d18ebcfd3 ]
When expr_parse_ctx is allocated by expr_ctx_new(),
expr_scanner_ctx->is_test isn't initialize, so it has garbage value.
this can affects the result of expr__parse() return when it parses
non-exist event literal according to garbage value.
Use calloc instead of malloc in expr_ctx_new() to fix this.
Fixes: 3340a08354 ("perf pmu-events: Fix testing with JEVENTS_ARCH=all")
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241108143424.819126-1-yeoreum.yun@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03edb7020b ]
If perf_env__insert_bpf_prog_info() returns false due to a duplicate bpf
prog info node insertion, the temporary info_node and info_linear memory
will leak. Add a check to ensure the memory is freed if the function
returns false.
Fixes: d56354dc49 ("perf tools: Save bpf_prog_info and BTF of new BPF programs")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241205084500.823660-4-quic_zhonhan@quicinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7da6c7030 ]
Function __perf_env__insert_bpf_prog_info() will return without inserting
bpf prog info node into perf env again due to a duplicate bpf prog info
node insertion, causing the temporary info_linear and info_node memory to
leak. Modify the return type of this function to bool and add a check to
ensure the memory is freed if the function returns false.
Fixes: 606f972b13 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241205084500.823660-3-quic_zhonhan@quicinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 875d22980a ]
If __perf_env__insert_btf() returns false due to a duplicate btf node
insertion, the temporary node will leak. Add a check to ensure the memory
is freed if the function returns false.
Fixes: a70a112317 ("perf bpf: Save BTF information as headers to perf.data")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241205084500.823660-2-quic_zhonhan@quicinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d33dc1bc3 ]
With CONFIG_KPROBES_ON_FTRACE enabled on powerpc, ftrace_location_range
returns ftrace location for bpf_fentry_test1 at offset of 4 bytes from
function entry. This is because branch to _mcount function is at offset
of 4 bytes in function profile sequence.
To fix this, add entry_offset of 4 bytes while verifying the address for
kprobe entry address of bpf_fentry_test1 in verify_perf_link_info in
selftest, when CONFIG_KPROBES_ON_FTRACE is enabled.
Disassemble of bpf_fentry_test1:
c000000000e4b080 <bpf_fentry_test1>:
c000000000e4b080: a6 02 08 7c mflr r0
c000000000e4b084: b9 e2 22 4b bl c00000000007933c <_mcount>
c000000000e4b088: 01 00 63 38 addi r3,r3,1
c000000000e4b08c: b4 07 63 7c extsw r3,r3
c000000000e4b090: 20 00 80 4e blr
When CONFIG_PPC_FTRACE_OUT_OF_LINE [1] is enabled, these function profile
sequence is moved out of line with an unconditional branch at offset 0.
So, the test works without altering the offset for
'CONFIG_KPROBES_ON_FTRACE && CONFIG_PPC_FTRACE_OUT_OF_LINE' case.
Disassemble of bpf_fentry_test1:
c000000000f95190 <bpf_fentry_test1>:
c000000000f95190: 00 00 00 60 nop
c000000000f95194: 01 00 63 38 addi r3,r3,1
c000000000f95198: b4 07 63 7c extsw r3,r3
c000000000f9519c: 20 00 80 4e blr
[1] https://lore.kernel.org/all/20241030070850.1361304-13-hbathini@linux.ibm.com/
Fixes: 23cf7aa539 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209065720.234344-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e10500b69c ]
Libelf functions do not set errno on failure. Instead, it relies on its
internal _elf_errno value, that can be retrieved via elf_errno (or the
corresponding message via elf_errmsg()). From "man libelf":
If a libelf function encounters an error it will set an internal
error code that can be retrieved with elf_errno. Each thread
maintains its own separate error code. The meaning of each error
code can be determined with elf_errmsg, which returns a string
describing the error.
As a consequence, libbpf should not return -errno when a function from
libelf fails, because an empty value will not be interpreted as an error
and won't prevent the program to stop. This is visible in
bpf_linker__add_file(), for example, where we call a succession of
functions that rely on libelf:
err = err ?: linker_load_obj_file(linker, filename, opts, &obj);
err = err ?: linker_append_sec_data(linker, &obj);
err = err ?: linker_append_elf_syms(linker, &obj);
err = err ?: linker_append_elf_relos(linker, &obj);
err = err ?: linker_append_btf(linker, &obj);
err = err ?: linker_append_btf_ext(linker, &obj);
If the object file that we try to process is not, in fact, a correct
object file, linker_load_obj_file() may fail with errno not being set,
and return 0. In this case we attempt to run linker_append_elf_sysms()
and may segfault.
This can happen (and was discovered) with bpftool:
$ bpftool gen object output.o sample_ret0.bpf.c
libbpf: failed to get ELF header for sample_ret0.bpf.c: invalid `Elf' handle
zsh: segmentation fault (core dumped) bpftool gen object output.o sample_ret0.bpf.c
Fix the issue by returning a non-null error code (-EINVAL) when libelf
functions fail.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241205135942.65262-1-qmo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2f0791124 ]
Commit f803bcf920 ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf920 ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98ebe5ef6f ]
USDT ELF note optionally can record an offset of .stapsdt.base, which is
used to make adjustments to USDT target attach address. Currently,
libbpf will do this address adjustment unconditionally if it finds
.stapsdt.base ELF section in target binary. But there is a corner case
where .stapsdt.base ELF section is present, but specific USDT note
doesn't reference it. In such case, libbpf will basically just add base
address and end up with absolutely incorrect USDT target address.
This adjustment has to be done only if both .stapsdt.sema section is
present and USDT note is recording a reference to it.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121224558.796110-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2107c35128 ]
The global variable errno may not be set in test_execute(). Do not use
it in related error message.
Cc: Günther Noack <gnoack@google.com>
Fixes: e1199815b4 ("selftests/landlock: Add user space tests")
Link: https://lore.kernel.org/r/20250108154338.1129069-21-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02bc220dc6 ]
intptr_t and uintptr_t are not big enough types on 32-bit architectures
when printing 64-bit values, resulting to the following incorrect
diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (3134324433)
Replace intptr_t and uintptr_t with intmax_t and uintmax_t, respectively.
With this fix, the same test produces more usable diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
Link: https://lore.kernel.org/r/20250108170757.GA6723@strace.io
Fixes: b5bb6d3068 ("selftests/seccomp: fix 32-bit build warnings")
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8694e6a7f7 ]
When adapting the test to the kselftest framework, a few printf() calls
indicating test progress were not updated.
Fix this by replacing these printf() calls by ksft_print_msg() calls.
Link: https://lore.kernel.org/r/7dd4b9ab6e43268846e250878ebf25ae6d3d01ce.1733994134.git.geert+renesas@glider.be
Fixes: ce7d101750 ("selftests: timers: clocksource-switch: adapt to kselftest framework")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d6c0e5851 ]
Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b)
changes TSC counter reads per cpu, but left time diff global (from start
of all cpus to end of all cpus), thus diff(time) is too large for a
cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus
`cpupower monitor` showing far less than actual cpu realtime frequency.
/proc/cpuinfo shows frequency:
cat /proc/cpuinfo | egrep -e 'processor' -e 'MHz'
...
processor : 171
cpu MHz : 4108.498
...
before fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.77| 99.23| 2279|| 0.00| 0.00| 0.00
after fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.46| 99.54| 4095|| 0.00| 0.00| 0.00
Fixes: c2adb1877b ("cpupower: Make TSC read per CPU for Mperf monitor")
Signed-off-by: He Rongguang <herongguang@linux.alibaba.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bf66e66d2 ]
Commit c814bf9589 ("powerpc/selftests: Use timersub() for
gettimeofday()"), got the order of arguments to timersub() wrong,
leading to a negative time delta being reported, eg:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030
time = -3.297781
success: gettimeofday
The correct order is minuend, subtrahend, which in this case is end,
start. Which gives:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030-dirty
time = 3.300650
success: gettimeofday
Fixes: c814bf9589 ("powerpc/selftests: Use timersub() for gettimeofday()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218114347.428108-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d9ccb18f83 upstream.
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rajani Kantha <rajanikantha@engineer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 218cc16632 upstream.
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e95274dfe8 ]
After previous change rshift >= 32 is no longer allowed.
Modify the test to use 31, the test doesn't seem to send
any traffic so the exact value shouldn't matter.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103182458.1213486-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9364a7e40d upstream.
commit 8043832e2a ("memblock: use numa_valid_node() helper to check
for invalid node ID") introduce a new helper numa_valid_node(), which is
not defined in memblock tests.
Let's add it in the corresponding header file.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240624015432.31134-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55853cb829 ]
The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular
dependency on the global-timer target due to its inclusion in
$(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency
warning during the build process.
To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been
replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change
ensures that libatest.so is built before any other targets that require it,
without creating a circular dependency.
This fix addresses the following warning:
make[4]: Entering directory 'tools/testing/selftests/alsa'
make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped.
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory 'tools/testing/selftests/alsa'
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20241218025931.914164-1-lizhijian@fujitsu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert commit ecc2aeeaa0 which is commit
41f6f64e69 upstream.
Levi reported that commit ecc2aeeaa0 ("bpf: support non-r10 register
spill/fill to/from stack in precision tracking") cause eBPF program that
previously loads successfully in stable 6.6 now fails to load, when the
same program also loads successfully in v6.13-rc5.
Revert ecc2aeeaa0 until the problem has been probably figured out and
resolved.
Fixes: ecc2aeeaa0 ("bpf: support non-r10 register spill/fill to/from stack in precision tracking")
Reported-by: Levi Zim <rsworktech@outlook.com>
Link: https://lore.kernel.org/stable/MEYP282MB2312C3C8801476C4F262D6E1C6162@MEYP282MB2312.AUSP282.PROD.OUTLOOK.COM/
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 724c6ce38b ]
For the most part of the C++ history, it couldn't have type
declarations inside anonymous unions for different reasons. At the
same time, __struct_group() relies on the latters, so when the @TAG
argument is not empty, C++ code doesn't want to build (even under
`extern "C"`):
../linux/include/uapi/linux/pkt_cls.h:25:24: error:
'struct tc_u32_sel::<unnamed union>::tc_u32_sel_hdr,' invalid;
an anonymous union may only have public non-static data members
[-fpermissive]
The safest way to fix this without trying to switch standards (which
is impossible in UAPI anyway) etc., is to disable tag declaration
for that language. This won't break anything since for now it's not
buildable at all.
Use a separate definition for __struct_group() when __cplusplus is
defined to mitigate the error, including the version from tools/.
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Reported-by: Christopher Ferris <cferris@google.com>
Closes: https://lore.kernel.org/linux-hardening/Z1HZpe3WE5As8UAz@google.com
Suggested-by: Kees Cook <kees@kernel.org> # __struct_group_tag()
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20241219135734.2130002-1-aleksander.lobakin@intel.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6a75f19af1 upstream.
The sysctl tests for vm.memfd_noexec rely on the kernel to support PID
namespaces (i.e. the kernel is built with CONFIG_PID_NS=y). If the
kernel the test runs on does not support PID namespaces, the first sysctl
test will fail when attempting to spawn a new thread in a new PID
namespace, abort the test, preventing the remaining tests from being run.
This is not desirable, as not all kernels need PID namespaces, but can
still use the other features provided by memfd. Therefore, only run the
sysctl tests if the kernel supports PID namespaces. Otherwise, skip those
tests and emit an informative message to let the user know why the sysctl
tests are not being run.
Link: https://lkml.kernel.org/r/20241205192943.3228757-1-isaacmanjarres@google.com
Fixes: 11f75a0144 ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a17975992c ]
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91ae69c7ed ]
Align permissions of the resulting .nmconnection file, instead of
the input file from hv_kvp_daemon. To avoid the tiny time frame
where the output file is world-readable, use umask instead of chmod.
Fixes: 42999c9046 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241016143521.3735-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241016143521.3735-1-olaf@aepfle.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dda014ba59 upstream.
The syscall instruction is used in Xen PV mode for doing hypercalls.
Allow syscall to be used in the kernel in case it is tagged with an
unwind hint for objtool.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 68ec5395bc, backport of mainline commit a41b3828ec ("selftests/bpf:
Verify that sync_linked_regs preserves subreg_def") uses the __xlated() that
wasn't in the v6.6 code-base, and causes BPF selftests to fail compilation.
Remove the use of the __xlated() macro in
tools/testing/selftests/bpf/progs/verifier_scalar_ids.c to fix compilation
failure. Without the __xlated() checks the coverage is reduced, however the
test case still functions just fine.
Fixes: 68ec5395bc ("selftests/bpf: Verify that sync_linked_regs preserves subreg_def")
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51f1892b52 upstream.
Add a minimal netlink helper library for the BPF selftests. This has been
taken and cut down and cleaned up from iproute2. This covers basics such
as netdevice creation which we need for BPF selftests / BPF CI given
iproute2 package cannot cover it yet.
Stanislav Fomichev suggested that this could be replaced in future by ynl
tool generated C code once it has RTNL support to create devices. Once we
get to this point the BPF CI would also need to add libmnl. If no further
extensions are needed, a second option could be that we remove this code
again once iproute2 package has support.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce03573a19 ]
When using svcr_in to check ZA and Streaming Mode, we should make sure
that the value in x2 is correct, otherwise it may trigger an Illegal
instruction if FEAT_SVE and !FEAT_SME.
Fixes: 43e3f85523 ("kselftest/arm64: Add SME support to syscall ABI test")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211111639.12344-1-o451686892@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f2c7ab15f ]
The test assumes that the packet it is sending is the only packet being
passed to the device.
However, it is not the case and so other packets are filling the buffers
as well. Therefore, the test sometimes fails because it is reading a
maximum occupancy that is larger than expected.
Add egress filters on $h1 and $h2 that will guarantee the above.
Fixes: a865ad9996 ("selftests: mlxsw: Add shared buffer traffic test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/64c28bc9b1cc1d78c4a73feda7cedbe9526ccf8b.1733414773.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
