linux-yocto/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
Lorenzo Bianconi 16ac43a1b1 iio: imu: st_lsm6dsx: add support to ASM330LHHXG1
Add support to STM ASM330LHHXG1 (accelerometer and gyroscope) Mems
sensor.
The ASM330LHHXG1 sensor can use LSM6DSR as fallback device since LSM6DSR
implements all the ASM330LHHXG1 features currently implemented in
st_lsm6dsx.

Link: https://www.st.com/resource/en/datasheet/asm330lhhxg1.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/e3dbe4720cdf407d0152e93b1331306a8c7f5df3.1706961432.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-17 16:16:11 +00:00

812 lines
21 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* STMicroelectronics st_lsm6dsx FIFO buffer library driver
*
* Pattern FIFO:
* The FIFO buffer can be configured to store data from gyroscope and
* accelerometer. Samples are queued without any tag according to a
* specific pattern based on 'FIFO data sets' (6 bytes each):
* - 1st data set is reserved for gyroscope data
* - 2nd data set is reserved for accelerometer data
* The FIFO pattern changes depending on the ODRs and decimation factors
* assigned to the FIFO data sets. The first sequence of data stored in FIFO
* buffer contains the data of all the enabled FIFO data sets
* (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
* value of the decimation factor and ODR set for each FIFO data set.
*
* Supported devices:
* - ISM330DLC
* - LSM6DS3
* - LSM6DS3H
* - LSM6DS3TR-C
* - LSM6DSL
* - LSM6DSM
*
* Tagged FIFO:
* The FIFO buffer can be configured to store data from gyroscope and
* accelerometer. Each sample is queued with a tag (1B) indicating data
* source (gyroscope, accelerometer, hw timer).
*
* Supported devices:
* - ASM330LHB
* - ASM330LHH
* - ASM330LHHX
* - ASM330LHHXG1
* - ISM330DHCX
* - LSM6DSO
* - LSM6DSOP
* - LSM6DSOX
* - LSM6DSR
* - LSM6DSRX
* - LSM6DST
* - LSM6DSTX
* - LSM6DSV
*
* FIFO supported modes:
* - BYPASS: FIFO disabled
* - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index
* restarts from the beginning and the oldest sample is overwritten
*
* Copyright 2016 STMicroelectronics Inc.
*
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
* Denis Ciocca <denis.ciocca@st.com>
*/
#include <linux/module.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/regmap.h>
#include <linux/bitfield.h>
#include <linux/platform_data/st_sensors_pdata.h>
#include "st_lsm6dsx.h"
#define ST_LSM6DSX_REG_FIFO_MODE_ADDR 0x0a
#define ST_LSM6DSX_FIFO_MODE_MASK GENMASK(2, 0)
#define ST_LSM6DSX_FIFO_ODR_MASK GENMASK(6, 3)
#define ST_LSM6DSX_FIFO_EMPTY_MASK BIT(12)
#define ST_LSM6DSX_REG_FIFO_OUTL_ADDR 0x3e
#define ST_LSM6DSX_REG_FIFO_OUT_TAG_ADDR 0x78
#define ST_LSM6DSX_REG_TS_RESET_ADDR 0x42
#define ST_LSM6DSX_MAX_FIFO_ODR_VAL 0x08
#define ST_LSM6DSX_TS_RESET_VAL 0xaa
struct st_lsm6dsx_decimator_entry {
u8 decimator;
u8 val;
};
enum st_lsm6dsx_fifo_tag {
ST_LSM6DSX_GYRO_TAG = 0x01,
ST_LSM6DSX_ACC_TAG = 0x02,
ST_LSM6DSX_TS_TAG = 0x04,
ST_LSM6DSX_EXT0_TAG = 0x0f,
ST_LSM6DSX_EXT1_TAG = 0x10,
ST_LSM6DSX_EXT2_TAG = 0x11,
};
static const
struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = {
{ 0, 0x0 },
{ 1, 0x1 },
{ 2, 0x2 },
{ 3, 0x3 },
{ 4, 0x4 },
{ 8, 0x5 },
{ 16, 0x6 },
{ 32, 0x7 },
};
static int
st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
{
const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
u32 decimator = max_odr / sensor->odr;
int i;
if (decimator > 1)
decimator = round_down(decimator, 2);
for (i = 0; i < max_size; i++) {
if (st_lsm6dsx_decimator_table[i].decimator == decimator)
break;
}
sensor->decimator = decimator;
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
}
static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
u32 *max_odr, u32 *min_odr)
{
struct st_lsm6dsx_sensor *sensor;
int i;
*max_odr = 0, *min_odr = ~0;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
if (!hw->iio_devs[i])
continue;
sensor = iio_priv(hw->iio_devs[i]);
if (!(hw->enable_mask & BIT(sensor->id)))
continue;
*max_odr = max_t(u32, *max_odr, sensor->odr);
*min_odr = min_t(u32, *min_odr, sensor->odr);
}
}
static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr)
{
u8 sip = sensor->odr / min_odr;
return sip > 1 ? round_down(sip, 2) : sip;
}
static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_reg *ts_dec_reg;
struct st_lsm6dsx_sensor *sensor;
u16 sip = 0, ts_sip = 0;
u32 max_odr, min_odr;
int err = 0, i;
u8 data;
st_lsm6dsx_get_max_min_odr(hw, &max_odr, &min_odr);
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
const struct st_lsm6dsx_reg *dec_reg;
if (!hw->iio_devs[i])
continue;
sensor = iio_priv(hw->iio_devs[i]);
/* update fifo decimators and sample in pattern */
if (hw->enable_mask & BIT(sensor->id)) {
sensor->sip = st_lsm6dsx_get_sip(sensor, min_odr);
data = st_lsm6dsx_get_decimator_val(sensor, max_odr);
} else {
sensor->sip = 0;
data = 0;
}
ts_sip = max_t(u16, ts_sip, sensor->sip);
dec_reg = &hw->settings->decimator[sensor->id];
if (dec_reg->addr) {
int val = ST_LSM6DSX_SHIFT_VAL(data, dec_reg->mask);
err = st_lsm6dsx_update_bits_locked(hw, dec_reg->addr,
dec_reg->mask,
val);
if (err < 0)
return err;
}
sip += sensor->sip;
}
hw->sip = sip + ts_sip;
hw->ts_sip = ts_sip;
/*
* update hw ts decimator if necessary. Decimator for hw timestamp
* is always 1 or 0 in order to have a ts sample for each data
* sample in FIFO
*/
ts_dec_reg = &hw->settings->ts_settings.decimator;
if (ts_dec_reg->addr) {
int val, ts_dec = !!hw->ts_sip;
val = ST_LSM6DSX_SHIFT_VAL(ts_dec, ts_dec_reg->mask);
err = st_lsm6dsx_update_bits_locked(hw, ts_dec_reg->addr,
ts_dec_reg->mask, val);
}
return err;
}
static int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
enum st_lsm6dsx_fifo_mode fifo_mode)
{
unsigned int data;
data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
ST_LSM6DSX_FIFO_MODE_MASK, data);
}
static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
const struct st_lsm6dsx_reg *batch_reg;
u8 data;
batch_reg = &hw->settings->batch[sensor->id];
if (batch_reg->addr) {
int val;
if (enable) {
int err;
err = st_lsm6dsx_check_odr(sensor, sensor->odr,
&data);
if (err < 0)
return err;
} else {
data = 0;
}
val = ST_LSM6DSX_SHIFT_VAL(data, batch_reg->mask);
return st_lsm6dsx_update_bits_locked(hw, batch_reg->addr,
batch_reg->mask, val);
} else {
data = hw->enable_mask ? ST_LSM6DSX_MAX_FIFO_ODR_VAL : 0;
return st_lsm6dsx_update_bits_locked(hw,
ST_LSM6DSX_REG_FIFO_MODE_ADDR,
ST_LSM6DSX_FIFO_ODR_MASK,
FIELD_PREP(ST_LSM6DSX_FIFO_ODR_MASK,
data));
}
}
int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
{
u16 fifo_watermark = ~0, cur_watermark, fifo_th_mask;
struct st_lsm6dsx_hw *hw = sensor->hw;
struct st_lsm6dsx_sensor *cur_sensor;
int i, err, data;
__le16 wdata;
if (!hw->sip)
return 0;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
if (!hw->iio_devs[i])
continue;
cur_sensor = iio_priv(hw->iio_devs[i]);
if (!(hw->enable_mask & BIT(cur_sensor->id)))
continue;
cur_watermark = (cur_sensor == sensor) ? watermark
: cur_sensor->watermark;
fifo_watermark = min_t(u16, fifo_watermark, cur_watermark);
}
fifo_watermark = max_t(u16, fifo_watermark, hw->sip);
fifo_watermark = (fifo_watermark / hw->sip) * hw->sip;
fifo_watermark = fifo_watermark * hw->settings->fifo_ops.th_wl;
mutex_lock(&hw->page_lock);
err = regmap_read(hw->regmap, hw->settings->fifo_ops.fifo_th.addr + 1,
&data);
if (err < 0)
goto out;
fifo_th_mask = hw->settings->fifo_ops.fifo_th.mask;
fifo_watermark = ((data << 8) & ~fifo_th_mask) |
(fifo_watermark & fifo_th_mask);
wdata = cpu_to_le16(fifo_watermark);
err = regmap_bulk_write(hw->regmap,
hw->settings->fifo_ops.fifo_th.addr,
&wdata, sizeof(wdata));
out:
mutex_unlock(&hw->page_lock);
return err;
}
static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *sensor;
int i, err;
/* reset hw ts counter */
err = st_lsm6dsx_write_locked(hw, ST_LSM6DSX_REG_TS_RESET_ADDR,
ST_LSM6DSX_TS_RESET_VAL);
if (err < 0)
return err;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
if (!hw->iio_devs[i])
continue;
sensor = iio_priv(hw->iio_devs[i]);
/*
* store enable buffer timestamp as reference for
* hw timestamp
*/
sensor->ts_ref = iio_get_time_ns(hw->iio_devs[i]);
}
return 0;
}
int st_lsm6dsx_resume_fifo(struct st_lsm6dsx_hw *hw)
{
int err;
/* reset hw ts counter */
err = st_lsm6dsx_reset_hw_ts(hw);
if (err < 0)
return err;
return st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
}
/*
* Set max bulk read to ST_LSM6DSX_MAX_WORD_LEN/ST_LSM6DSX_MAX_TAGGED_WORD_LEN
* in order to avoid a kmalloc for each bus access
*/
static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
u8 *data, unsigned int data_len,
unsigned int max_word_len)
{
unsigned int word_len, read_len = 0;
int err;
while (read_len < data_len) {
word_len = min_t(unsigned int, data_len - read_len,
max_word_len);
err = st_lsm6dsx_read_locked(hw, addr, data + read_len,
word_len);
if (err < 0)
return err;
read_len += word_len;
}
return 0;
}
#define ST_LSM6DSX_IIO_BUFF_SIZE (ALIGN(ST_LSM6DSX_SAMPLE_SIZE, \
sizeof(s64)) + sizeof(s64))
/**
* st_lsm6dsx_read_fifo() - hw FIFO read routine
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
*
* Read samples from the hw FIFO and push them to IIO buffers.
*
* Return: Number of bytes read from the FIFO
*/
int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
bool reset_ts = false;
__le16 fifo_status;
s64 ts = 0;
err = st_lsm6dsx_read_locked(hw,
hw->settings->fifo_ops.fifo_diff.addr,
&fifo_status, sizeof(fifo_status));
if (err < 0) {
dev_err(hw->dev, "failed to read fifo status (err=%d)\n",
err);
return err;
}
if (fifo_status & cpu_to_le16(ST_LSM6DSX_FIFO_EMPTY_MASK))
return 0;
fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
ST_LSM6DSX_CHAN_SIZE;
fifo_len = (fifo_len / pattern_len) * pattern_len;
acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
if (hw->iio_devs[ST_LSM6DSX_ID_EXT0])
ext_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_EXT0]);
for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
err = st_lsm6dsx_read_block(hw, ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
hw->buff, pattern_len,
ST_LSM6DSX_MAX_WORD_LEN);
if (err < 0) {
dev_err(hw->dev,
"failed to read pattern from fifo (err=%d)\n",
err);
return err;
}
/*
* Data are written to the FIFO with a specific pattern
* depending on the configured ODRs. The first sequence of data
* stored in FIFO contains the data of all enabled sensors
* (e.g. Gx, Gy, Gz, Ax, Ay, Az, Ts), then data are repeated
* depending on the value of the decimation factor set for each
* sensor.
*
* Supposing the FIFO is storing data from gyroscope and
* accelerometer at different ODRs:
* - gyroscope ODR = 208Hz, accelerometer ODR = 104Hz
* Since the gyroscope ODR is twice the accelerometer one, the
* following pattern is repeated every 9 samples:
* - Gx, Gy, Gz, Ax, Ay, Az, Ts, Gx, Gy, Gz, Ts, Gx, ..
*/
ext_sip = ext_sensor ? ext_sensor->sip : 0;
gyro_sip = gyro_sensor->sip;
acc_sip = acc_sensor->sip;
ts_sip = hw->ts_sip;
offset = 0;
sip = 0;
while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
memcpy(hw->scan[ST_LSM6DSX_ID_GYRO].channels,
&hw->buff[offset],
sizeof(hw->scan[ST_LSM6DSX_ID_GYRO].channels));
offset += sizeof(hw->scan[ST_LSM6DSX_ID_GYRO].channels);
}
if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
memcpy(hw->scan[ST_LSM6DSX_ID_ACC].channels,
&hw->buff[offset],
sizeof(hw->scan[ST_LSM6DSX_ID_ACC].channels));
offset += sizeof(hw->scan[ST_LSM6DSX_ID_ACC].channels);
}
if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
memcpy(hw->scan[ST_LSM6DSX_ID_EXT0].channels,
&hw->buff[offset],
sizeof(hw->scan[ST_LSM6DSX_ID_EXT0].channels));
offset += sizeof(hw->scan[ST_LSM6DSX_ID_EXT0].channels);
}
if (ts_sip-- > 0) {
u8 data[ST_LSM6DSX_SAMPLE_SIZE];
memcpy(data, &hw->buff[offset], sizeof(data));
/*
* hw timestamp is 3B long and it is stored
* in FIFO using 6B as 4th FIFO data set
* according to this schema:
* B0 = ts[15:8], B1 = ts[23:16], B3 = ts[7:0]
*/
ts = data[1] << 16 | data[0] << 8 | data[3];
/*
* check if hw timestamp engine is going to
* reset (the sensor generates an interrupt
* to signal the hw timestamp will reset in
* 1.638s)
*/
if (!reset_ts && ts >= 0xff0000)
reset_ts = true;
ts *= hw->ts_gain;
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
/*
* We need to discards gyro samples during
* filters settling time
*/
if (gyro_sensor->samples_to_discard > 0)
gyro_sensor->samples_to_discard--;
else
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_GYRO],
&hw->scan[ST_LSM6DSX_ID_GYRO],
gyro_sensor->ts_ref + ts);
gyro_sip--;
}
if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
/*
* We need to discards accel samples during
* filters settling time
*/
if (acc_sensor->samples_to_discard > 0)
acc_sensor->samples_to_discard--;
else
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_ACC],
&hw->scan[ST_LSM6DSX_ID_ACC],
acc_sensor->ts_ref + ts);
acc_sip--;
}
if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_EXT0],
&hw->scan[ST_LSM6DSX_ID_EXT0],
ext_sensor->ts_ref + ts);
ext_sip--;
}
sip++;
}
}
if (unlikely(reset_ts)) {
err = st_lsm6dsx_reset_hw_ts(hw);
if (err < 0) {
dev_err(hw->dev, "failed to reset hw ts (err=%d)\n",
err);
return err;
}
}
return read_len;
}
#define ST_LSM6DSX_INVALID_SAMPLE 0x7ffd
static int
st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
u8 *data, s64 ts)
{
s16 val = le16_to_cpu(*(__le16 *)data);
struct st_lsm6dsx_sensor *sensor;
struct iio_dev *iio_dev;
/* invalid sample during bootstrap phase */
if (val >= ST_LSM6DSX_INVALID_SAMPLE)
return -EINVAL;
/*
* EXT_TAG are managed in FIFO fashion so ST_LSM6DSX_EXT0_TAG
* corresponds to the first enabled channel, ST_LSM6DSX_EXT1_TAG
* to the second one and ST_LSM6DSX_EXT2_TAG to the last enabled
* channel
*/
switch (tag) {
case ST_LSM6DSX_GYRO_TAG:
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_GYRO];
break;
case ST_LSM6DSX_ACC_TAG:
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_ACC];
break;
case ST_LSM6DSX_EXT0_TAG:
if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0))
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT0];
else if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1))
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
else
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
break;
case ST_LSM6DSX_EXT1_TAG:
if ((hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0)) &&
(hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1)))
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
else
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
break;
case ST_LSM6DSX_EXT2_TAG:
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
break;
default:
return -EINVAL;
}
sensor = iio_priv(iio_dev);
iio_push_to_buffers_with_timestamp(iio_dev, data,
ts + sensor->ts_ref);
return 0;
}
/**
* st_lsm6dsx_read_tagged_fifo() - tagged hw FIFO read routine
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
*
* Read samples from the hw FIFO and push them to IIO buffers.
*
* Return: Number of bytes read from the FIFO
*/
int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw)
{
u16 pattern_len = hw->sip * ST_LSM6DSX_TAGGED_SAMPLE_SIZE;
u16 fifo_len, fifo_diff_mask;
/*
* Alignment needed as this can ultimately be passed to a
* call to iio_push_to_buffers_with_timestamp() which
* must be passed a buffer that is aligned to 8 bytes so
* as to allow insertion of a naturally aligned timestamp.
*/
u8 iio_buff[ST_LSM6DSX_IIO_BUFF_SIZE] __aligned(8);
u8 tag;
bool reset_ts = false;
int i, err, read_len;
__le16 fifo_status;
s64 ts = 0;
err = st_lsm6dsx_read_locked(hw,
hw->settings->fifo_ops.fifo_diff.addr,
&fifo_status, sizeof(fifo_status));
if (err < 0) {
dev_err(hw->dev, "failed to read fifo status (err=%d)\n",
err);
return err;
}
fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
ST_LSM6DSX_TAGGED_SAMPLE_SIZE;
if (!fifo_len)
return 0;
for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
err = st_lsm6dsx_read_block(hw,
ST_LSM6DSX_REG_FIFO_OUT_TAG_ADDR,
hw->buff, pattern_len,
ST_LSM6DSX_MAX_TAGGED_WORD_LEN);
if (err < 0) {
dev_err(hw->dev,
"failed to read pattern from fifo (err=%d)\n",
err);
return err;
}
for (i = 0; i < pattern_len;
i += ST_LSM6DSX_TAGGED_SAMPLE_SIZE) {
memcpy(iio_buff, &hw->buff[i + ST_LSM6DSX_TAG_SIZE],
ST_LSM6DSX_SAMPLE_SIZE);
tag = hw->buff[i] >> 3;
if (tag == ST_LSM6DSX_TS_TAG) {
/*
* hw timestamp is 4B long and it is stored
* in FIFO according to this schema:
* B0 = ts[7:0], B1 = ts[15:8], B2 = ts[23:16],
* B3 = ts[31:24]
*/
ts = le32_to_cpu(*((__le32 *)iio_buff));
/*
* check if hw timestamp engine is going to
* reset (the sensor generates an interrupt
* to signal the hw timestamp will reset in
* 1.638s)
*/
if (!reset_ts && ts >= 0xffff0000)
reset_ts = true;
ts *= hw->ts_gain;
} else {
st_lsm6dsx_push_tagged_data(hw, tag, iio_buff,
ts);
}
}
}
if (unlikely(reset_ts)) {
err = st_lsm6dsx_reset_hw_ts(hw);
if (err < 0)
return err;
}
return read_len;
}
int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
{
int err;
if (!hw->settings->fifo_ops.read_fifo)
return -ENOTSUPP;
mutex_lock(&hw->fifo_lock);
hw->settings->fifo_ops.read_fifo(hw);
err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_BYPASS);
mutex_unlock(&hw->fifo_lock);
return err;
}
static void
st_lsm6dsx_update_samples_to_discard(struct st_lsm6dsx_sensor *sensor)
{
const struct st_lsm6dsx_samples_to_discard *data;
struct st_lsm6dsx_hw *hw = sensor->hw;
int i;
if (sensor->id != ST_LSM6DSX_ID_GYRO &&
sensor->id != ST_LSM6DSX_ID_ACC)
return;
/* check if drdy mask is supported in hw */
if (hw->settings->drdy_mask.addr)
return;
data = &hw->settings->samples_to_discard[sensor->id];
for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) {
if (data->val[i].milli_hz == sensor->odr) {
sensor->samples_to_discard = data->val[i].samples;
return;
}
}
}
int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
u8 fifo_mask;
int err;
mutex_lock(&hw->conf_lock);
if (enable)
fifo_mask = hw->fifo_mask | BIT(sensor->id);
else
fifo_mask = hw->fifo_mask & ~BIT(sensor->id);
if (hw->fifo_mask) {
err = st_lsm6dsx_flush_fifo(hw);
if (err < 0)
goto out;
}
if (enable)
st_lsm6dsx_update_samples_to_discard(sensor);
err = st_lsm6dsx_device_set_enable(sensor, enable);
if (err < 0)
goto out;
err = st_lsm6dsx_set_fifo_odr(sensor, enable);
if (err < 0)
goto out;
err = st_lsm6dsx_update_decimators(hw);
if (err < 0)
goto out;
err = st_lsm6dsx_update_watermark(sensor, sensor->watermark);
if (err < 0)
goto out;
if (fifo_mask) {
err = st_lsm6dsx_resume_fifo(hw);
if (err < 0)
goto out;
}
hw->fifo_mask = fifo_mask;
out:
mutex_unlock(&hw->conf_lock);
return err;
}
static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
{
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
struct st_lsm6dsx_hw *hw = sensor->hw;
if (!hw->settings->fifo_ops.update_fifo)
return -ENOTSUPP;
return hw->settings->fifo_ops.update_fifo(sensor, true);
}
static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev)
{
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
struct st_lsm6dsx_hw *hw = sensor->hw;
if (!hw->settings->fifo_ops.update_fifo)
return -ENOTSUPP;
return hw->settings->fifo_ops.update_fifo(sensor, false);
}
static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
.preenable = st_lsm6dsx_buffer_preenable,
.postdisable = st_lsm6dsx_buffer_postdisable,
};
int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
{
int i, ret;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
if (!hw->iio_devs[i])
continue;
ret = devm_iio_kfifo_buffer_setup(hw->dev, hw->iio_devs[i],
&st_lsm6dsx_buffer_ops);
if (ret)
return ret;
}
return 0;
}