a0df3ef087
This PFSM controls the operational modes of the PMIC: - STANDBY and LP_STANDBY, - ACTIVE state, - MCU_ONLY state, - RETENTION state, with or without DDR and/or GPIO retention. Depending on the current operational mode, some voltage domains remain energized while others can be off. This PFSM is also used to trigger a firmware update, and provides R/W access to device registers. See Documentation/misc-devices/tps6594-pfsm.rst for more information. Signed-off-by: Julien Panis <jpanis@baylibre.com> Message-ID: <20230511095126.105104-5-jpanis@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2.6 KiB
SPDX-License-Identifier: GPL-2.0
Makefile for misc devices that really don't fit anywhere else.
obj-$(CONFIG_IBM_ASM) += ibmasm/ obj-$(CONFIG_IBMVMC) += ibmvmc.o obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_LKDTM) += lkdtm/ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_SMPRO_ERRMON) += smpro-errmon.o obj-$(CONFIG_SMPRO_MISC) += smpro-misc.o obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o obj-$(CONFIG_GEHC_ACHC) += gehc-achc.o obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_APDS9802ALS) += apds9802als.o obj-$(CONFIG_ISL29003) += isl29003.o obj-$(CONFIG_ISL29020) += isl29020.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o obj-$(CONFIG_DS1682) += ds1682.o obj-$(CONFIG_C2PORT) += c2port/ obj-$(CONFIG_HMC6352) += hmc6352.o obj-y += eeprom/ obj-y += cb710/ obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o obj-$(CONFIG_PCH_PHUB) += pch_phub.o obj-y += ti-st/ obj-y += lis3lv02d/ obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ obj-$(CONFIG_INTEL_MEI) += mei/ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o obj-$(CONFIG_SRAM) += sram.o obj-$(CONFIG_SRAM_EXEC) += sram-exec.o obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_CXL_BASE) += cxl/ obj-$(CONFIG_DW_XDATA_PCIE) += dw-xdata-pcie.o obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o obj-$(CONFIG_OCXL) += ocxl/ obj-$(CONFIG_BCM_VK) += bcm-vk/ obj-y += cardreader/ obj-$(CONFIG_PVPANIC) += pvpanic/ obj-$(CONFIG_UACCE) += uacce/ obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o obj-$(CONFIG_HI6421V600_IRQ) += hi6421v600-irq.o obj-$(CONFIG_OPEN_DICE) += open-dice.o obj-$(CONFIG_GP_PCI1XXXX) += mchp_pci1xxxx/ obj-$(CONFIG_VCPU_STALL_DETECTOR) += vcpu_stall_detector.o obj-$(CONFIG_TMR_MANAGER) += xilinx_tmr_manager.o obj-$(CONFIG_TMR_INJECT) += xilinx_tmr_inject.o obj-$(CONFIG_TPS6594_ESM) += tps6594-esm.o obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o