linux-yocto/sound/pci/hda/tas2781_hda_spi.c

// SPDX-License-Identifier: GPL-2.0
//
// TAS2781 HDA SPI driver
//
// Copyright 2024 Texas Instruments, Inc.
//
// Author: Baojun Xu <baojun.xu@ti.com>

#include <linux/acpi.h>
#include <linux/array_size.h>
#include <linux/bits.h>
#include <linux/cleanup.h>
#include <linux/crc8.h>
#include <linux/crc32.h>
#include <linux/efi.h>
#include <linux/firmware.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include <linux/time.h>
#include <linux/types.h>
#include <linux/units.h>

#include <sound/hda_codec.h>
#include <sound/soc.h>
#include <sound/tas2781-dsp.h>
#include <sound/tlv.h>
#include <sound/tas2781-tlv.h>

#include "tas2781-spi.h"

#include "hda_local.h"
#include "hda_auto_parser.h"
#include "hda_component.h"
#include "hda_jack.h"
#include "hda_generic.h"

/*
 * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD
 * Define two controls, one is Volume control callbacks, the other is
 * flag setting control callbacks.
 */

/* Volume control callbacks for tas2781 */
#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \
	xhandler_get, xhandler_put, tlv_array) { \
	.iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \
	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
		SNDRV_CTL_ELEM_ACCESS_READWRITE, \
	.tlv.p = (tlv_array), \
	.info = snd_soc_info_volsw_range, \
	.get = xhandler_get, .put = xhandler_put, \
	.private_value = (unsigned long)&(struct soc_mixer_control) { \
		.reg = xreg, .rreg = xreg, \
		.shift = xshift, .rshift = xshift,\
		.min = xmin, .max = xmax, .invert = xinvert, \
	} \
}

/* Flag control callbacks for tas2781 */
#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \
	.iface = SNDRV_CTL_ELEM_IFACE_CARD, \
	.name = xname, \
	.info = snd_ctl_boolean_mono_info, \
	.get = xhandler_get, \
	.put = xhandler_put, \
	.private_value = xdata, \
}

struct tas2781_hda {
	struct tasdevice_priv *priv;
	struct acpi_device *dacpi;
	struct snd_kcontrol *dsp_prog_ctl;
	struct snd_kcontrol *dsp_conf_ctl;
	struct snd_kcontrol *snd_ctls[3];
	struct snd_kcontrol *prof_ctl;
};

static const struct regmap_range_cfg tasdevice_ranges[] = {
	{
		.range_min = 0,
		.range_max = TASDEVICE_MAX_SIZE,
		.selector_reg = TASDEVICE_PAGE_SELECT,
		.selector_mask = GENMASK(7, 0),
		.selector_shift = 0,
		.window_start = 0,
		.window_len = TASDEVICE_MAX_PAGE,
	},
};

static const struct regmap_config tasdevice_regmap = {
	.reg_bits = 8,
	.val_bits = 8,
	.zero_flag_mask = true,
	.cache_type = REGCACHE_NONE,
	.ranges = tasdevice_ranges,
	.num_ranges = ARRAY_SIZE(tasdevice_ranges),
	.max_register = TASDEVICE_MAX_SIZE,
};

static int tasdevice_spi_switch_book(struct tasdevice_priv *tas_priv, int reg)
{
	struct regmap *map = tas_priv->regmap;

	if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) {
		int ret = regmap_write(map, TASDEVICE_BOOKCTL_REG,
				       TASDEVICE_BOOK_ID(reg));
		if (ret < 0) {
			dev_err(tas_priv->dev, "Switch Book E=%d\n", ret);
			return ret;
		}
		tas_priv->cur_book = TASDEVICE_BOOK_ID(reg);
	}
	return 0;
}

int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv,
			   unsigned int reg,
			   unsigned int *val)
{
	struct regmap *map = tas_priv->regmap;
	int ret;

	ret = tasdevice_spi_switch_book(tas_priv, reg);
	if (ret < 0)
		return ret;

	/*
	 * In our TAS2781 SPI mode, if read from other book (not book 0),
	 * or read from page number larger than 1 in book 0, one more byte
	 * read is needed, and first byte is a dummy byte, need to be ignored.
	 */
	if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) {
		unsigned char data[2];

		ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1,
			data, sizeof(data));
		*val = data[1];
	} else {
		ret = regmap_read(map, TASDEVICE_PAGE_REG(reg) | 1, val);
	}
	if (ret < 0)
		dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);

	return ret;
}

int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv,
			    unsigned int reg,
			    unsigned int value)
{
	struct regmap *map = tas_priv->regmap;
	int ret;

	ret = tasdevice_spi_switch_book(tas_priv, reg);
	if (ret < 0)
		return ret;

	ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), value);
	if (ret < 0)
		dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);

	return ret;
}

int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv,
				 unsigned int reg,
				 unsigned char *data,
				 unsigned int len)
{
	struct regmap *map = tas_priv->regmap;
	int ret;

	ret = tasdevice_spi_switch_book(tas_priv, reg);
	if (ret < 0)
		return ret;

	ret = regmap_bulk_write(map, TASDEVICE_PAGE_REG(reg), data, len);
	if (ret < 0)
		dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);

	return ret;
}

int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv,
				unsigned int reg,
				unsigned char *data,
				unsigned int len)
{
	struct regmap *map = tas_priv->regmap;
	int ret;

	ret = tasdevice_spi_switch_book(tas_priv, reg);
	if (ret < 0)
		return ret;

	if (len > TASDEVICE_MAX_PAGE)
		len = TASDEVICE_MAX_PAGE;
	/*
	 * In our TAS2781 SPI mode, if read from other book (not book 0),
	 * or read from page number larger than 1 in book 0, one more byte
	 * read is needed, and first byte is a dummy byte, need to be ignored.
	 */
	if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) {
		unsigned char buf[TASDEVICE_MAX_PAGE+1];

		ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, buf,
				      len + 1);
		memcpy(data, buf + 1, len);
	} else {
		ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, data,
				      len);
	}
	if (ret < 0)
		dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);

	return ret;
}

int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv,
				  unsigned int reg,
				  unsigned int mask,
				  unsigned int value)
{
	struct regmap *map = tas_priv->regmap;
	int ret, val;

	/*
	 * In our TAS2781 SPI mode, read/write was masked in last bit of
	 * address, it cause regmap_update_bits() not work as expected.
	 */
	ret = tasdevice_spi_dev_read(tas_priv, reg, &val);
	if (ret < 0) {
		dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);
		return ret;
	}
	ret = regmap_write(map, TASDEVICE_PAGE_REG(reg),
			  (val & ~mask) | (mask & value));
	if (ret < 0)
		dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret);

	return ret;
}

static void tas2781_spi_reset(struct tasdevice_priv *tas_dev)
{
	int ret;

	if (tas_dev->reset) {
		gpiod_set_value_cansleep(tas_dev->reset, 0);
		fsleep(800);
		gpiod_set_value_cansleep(tas_dev->reset, 1);
	}
	ret = tasdevice_spi_dev_write(tas_dev, TAS2781_REG_SWRESET,
		TAS2781_REG_SWRESET_RESET);
	if (ret < 0)
		dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret);
	fsleep(1000);
}

static int tascodec_spi_init(struct tasdevice_priv *tas_priv,
	void *codec, struct module *module,
	void (*cont)(const struct firmware *fw, void *context))
{
	int ret;

	/*
	 * Codec Lock Hold to ensure that codec_probe and firmware parsing and
	 * loading do not simultaneously execute.
	 */
	guard(mutex)(&tas_priv->codec_lock);

	scnprintf(tas_priv->rca_binaryname,
		sizeof(tas_priv->rca_binaryname), "%sRCA%d.bin",
		tas_priv->dev_name, tas_priv->index);
	crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL);
	tas_priv->codec = codec;
	ret = request_firmware_nowait(module, FW_ACTION_UEVENT,
		tas_priv->rca_binaryname, tas_priv->dev, GFP_KERNEL, tas_priv,
		cont);
	if (ret)
		dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n",
			ret);

	return ret;
}

static void tasdevice_spi_init(struct tasdevice_priv *tas_priv)
{
	tas_priv->cur_prog = -1;
	tas_priv->cur_conf = -1;

	tas_priv->cur_book = -1;
	tas_priv->cur_prog = -1;
	tas_priv->cur_conf = -1;

	/* Store default registers address for calibration data. */
	tas_priv->cali_reg_array[0] = TASDEVICE_REG(0, 0x17, 0x74);
	tas_priv->cali_reg_array[1] = TASDEVICE_REG(0, 0x18, 0x0c);
	tas_priv->cali_reg_array[2] = TASDEVICE_REG(0, 0x18, 0x14);
	tas_priv->cali_reg_array[3] = TASDEVICE_REG(0, 0x13, 0x70);
	tas_priv->cali_reg_array[4] = TASDEVICE_REG(0, 0x18, 0x7c);

	mutex_init(&tas_priv->codec_lock);
}

static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv,
				    struct snd_ctl_elem_value *ucontrol,
				    struct soc_mixer_control *mc)
{
	unsigned int invert = mc->invert;
	unsigned char mask;
	int max = mc->max;
	int val, ret;

	mask = rounddown_pow_of_two(max);
	mask <<= mc->shift;
	val =  clamp(invert ? max - ucontrol->value.integer.value[0] :
		ucontrol->value.integer.value[0], 0, max);
	ret = tasdevice_spi_dev_update_bits(tas_priv,
		mc->reg, mask, (unsigned int)(val << mc->shift));
	if (ret)
		dev_err(tas_priv->dev, "set AMP vol error in dev %d\n",
			tas_priv->index);

	return ret;
}

static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv,
				    struct snd_ctl_elem_value *ucontrol,
				    struct soc_mixer_control *mc)
{
	unsigned int invert = mc->invert;
	unsigned char mask = 0;
	int max = mc->max;
	int ret, val;

	/* Read the primary device */
	ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val);
	if (ret) {
		dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__);
		return ret;
	}

	mask = rounddown_pow_of_two(max);
	mask <<= mc->shift;
	val = (val & mask) >> mc->shift;
	val = clamp(invert ? max - val : val, 0, max);
	ucontrol->value.integer.value[0] = val;

	return ret;
}

static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv,
					struct snd_ctl_elem_value *ucontrol,
					struct soc_mixer_control *mc)
{
	unsigned int invert = mc->invert;
	int max = mc->max;
	int val, ret;

	val = clamp(invert ? max - ucontrol->value.integer.value[0] :
		ucontrol->value.integer.value[0], 0, max);
	ret = tasdevice_spi_dev_write(tas_priv, mc->reg, (unsigned int)val);
	if (ret)
		dev_err(tas_priv->dev, "set digital vol err in dev %d\n",
			tas_priv->index);

	return ret;
}

static int tasdevice_spi_digital_getvol(struct tasdevice_priv *tas_priv,
					struct snd_ctl_elem_value *ucontrol,
					struct soc_mixer_control *mc)
{
	unsigned int invert = mc->invert;
	int max = mc->max;
	int ret, val;

	/* Read the primary device as the whole */
	ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val);
	if (ret) {
		dev_err(tas_priv->dev, "%s, get digital vol err\n", __func__);
		return ret;
	}

	val = clamp(invert ? max - val : val, 0, max);
	ucontrol->value.integer.value[0] = val;

	return ret;
}

static int tas2781_read_acpi(struct tas2781_hda *tas_hda,
			     const char *hid,
			     int id)
{
	struct tasdevice_priv *p = tas_hda->priv;
	struct acpi_device *adev;
	struct device *physdev;
	u32 values[HDA_MAX_COMPONENTS];
	const char *property;
	size_t nval;
	int ret, i;

	adev = acpi_dev_get_first_match_dev(hid, NULL, -1);
	if (!adev) {
		dev_err(p->dev, "Failed to find ACPI device: %s\n", hid);
		return -ENODEV;
	}

	strscpy(p->dev_name, hid, sizeof(p->dev_name));
	tas_hda->dacpi = adev;
	physdev = get_device(acpi_get_first_physical_node(adev));
	acpi_dev_put(adev);

	property = "ti,dev-index";
	ret = device_property_count_u32(physdev, property);
	if (ret <= 0 || ret > ARRAY_SIZE(values)) {
		ret = -EINVAL;
		goto err;
	}
	nval = ret;

	ret = device_property_read_u32_array(physdev, property, values, nval);
	if (ret)
		goto err;

	p->index = U8_MAX;
	for (i = 0; i < nval; i++) {
		if (values[i] == id) {
			p->index = i;
			break;
		}
	}
	if (p->index == U8_MAX) {
		dev_dbg(p->dev, "No index found in %s\n", property);
		ret = -ENODEV;
		goto err;
	}

	if (p->index == 0) {
		/* All of amps share same RESET pin. */
		p->reset = devm_gpiod_get_index_optional(physdev, "reset",
			p->index, GPIOD_OUT_LOW);
		if (IS_ERR(p->reset)) {
			ret = PTR_ERR(p->reset);
			dev_err_probe(p->dev, ret, "Failed on reset GPIO\n");
			goto err;
		}
	}
	put_device(physdev);

	return 0;
err:
	dev_err(p->dev, "read acpi error, ret: %d\n", ret);
	put_device(physdev);
	acpi_dev_put(adev);

	return ret;
}

static void tas2781_hda_playback_hook(struct device *dev, int action)
{
	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);

	if (action == HDA_GEN_PCM_ACT_OPEN) {
		pm_runtime_get_sync(dev);
		guard(mutex)(&tas_hda->priv->codec_lock);
		tasdevice_spi_tuning_switch(tas_hda->priv, 0);
	} else if (action == HDA_GEN_PCM_ACT_CLOSE) {
		guard(mutex)(&tas_hda->priv->codec_lock);
		tasdevice_spi_tuning_switch(tas_hda->priv, 1);
		pm_runtime_mark_last_busy(dev);
		pm_runtime_put_autosuspend(dev);
	}
}

static int tasdevice_info_profile(struct snd_kcontrol *kcontrol,
				  struct snd_ctl_elem_info *uinfo)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);

	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
	uinfo->count = 1;
	uinfo->value.integer.min = 0;
	uinfo->value.integer.max = tas_priv->rcabin.ncfgs - 1;

	return 0;
}

static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol,
	struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);

	ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id;

	return 0;
}

static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol,
				    struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
	int max = tas_priv->rcabin.ncfgs - 1;
	int val;

	val = clamp(ucontrol->value.integer.value[0], 0, max);
	if (tas_priv->rcabin.profile_cfg_id != val) {
		tas_priv->rcabin.profile_cfg_id = val;
		return 1;
	}

	return 0;
}

static int tasdevice_info_programs(struct snd_kcontrol *kcontrol,
				   struct snd_ctl_elem_info *uinfo)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);

	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
	uinfo->count = 1;
	uinfo->value.integer.min = 0;
	uinfo->value.integer.max = tas_priv->fmw->nr_programs - 1;

	return 0;
}

static int tasdevice_info_config(struct snd_kcontrol *kcontrol,
				 struct snd_ctl_elem_info *uinfo)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);

	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
	uinfo->count = 1;
	uinfo->value.integer.min = 0;
	uinfo->value.integer.max = tas_priv->fmw->nr_configurations - 1;

	return 0;
}

static int tasdevice_program_get(struct snd_kcontrol *kcontrol,
				 struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);

	ucontrol->value.integer.value[0] = tas_priv->cur_prog;

	return 0;
}

static int tasdevice_program_put(struct snd_kcontrol *kcontrol,
				 struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
	int nr_program = ucontrol->value.integer.value[0];
	int max = tas_priv->fmw->nr_programs - 1;
	int val;

	val = clamp(nr_program, 0, max);

	if (tas_priv->cur_prog != val) {
		tas_priv->cur_prog = val;
		return 1;
	}

	return 0;
}

static int tasdevice_config_get(struct snd_kcontrol *kcontrol,
				struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);

	ucontrol->value.integer.value[0] = tas_priv->cur_conf;

	return 0;
}

static int tasdevice_config_put(struct snd_kcontrol *kcontrol,
				struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
	int max = tas_priv->fmw->nr_configurations - 1;
	int val;

	val = clamp(ucontrol->value.integer.value[0], 0, max);

	if (tas_priv->cur_conf != val) {
		tas_priv->cur_conf = val;
		return 1;
	}

	return 0;
}

/*
 * tas2781_digital_getvol - get the volum control
 * @kcontrol: control pointer
 * @ucontrol: User data
 *
 * Customer Kcontrol for tas2781 is primarily for regmap booking, paging
 * depends on internal regmap mechanism.
 * tas2781 contains book and page two-level register map, especially
 * book switching will set the register BXXP00R7F, after switching to the
 * correct book, then leverage the mechanism for paging to access the
 * register.
 *
 * Return 0 if succeeded.
 */
static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol,
				  struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
	struct soc_mixer_control *mc =
		(struct soc_mixer_control *)kcontrol->private_value;

	return tasdevice_spi_digital_getvol(tas_priv, ucontrol, mc);
}

static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol,
			      struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
	struct soc_mixer_control *mc =
		(struct soc_mixer_control *)kcontrol->private_value;

	return tasdevice_spi_amp_getvol(tas_priv, ucontrol, mc);
}

static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol,
				  struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
	struct soc_mixer_control *mc =
		(struct soc_mixer_control *)kcontrol->private_value;

	/* The check of the given value is in tasdevice_digital_putvol. */
	return tasdevice_spi_digital_putvol(tas_priv, ucontrol, mc);
}

static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol,
			      struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
	struct soc_mixer_control *mc =
		(struct soc_mixer_control *)kcontrol->private_value;

	/* The check of the given value is in tasdevice_amp_putvol. */
	return tasdevice_spi_amp_putvol(tas_priv, ucontrol, mc);
}

static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol,
				    struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);

	ucontrol->value.integer.value[0] = (int)tas_priv->force_fwload_status;
	dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__,
		str_on_off(tas_priv->force_fwload_status));

	return 0;
}

static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol,
				    struct snd_ctl_elem_value *ucontrol)
{
	struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
	bool change, val = (bool)ucontrol->value.integer.value[0];

	if (tas_priv->force_fwload_status == val) {
		change = false;
	} else {
		change = true;
		tas_priv->force_fwload_status = val;
	}
	dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__,
		str_on_off(tas_priv->force_fwload_status));

	return change;
}

static const struct snd_kcontrol_new tas2781_snd_controls[] = {
	ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 0", TAS2781_AMP_LEVEL,
		1, 0, 20, 0, tas2781_amp_getvol,
		tas2781_amp_putvol, amp_vol_tlv),
	ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 0", TAS2781_DVC_LVL,
		0, 0, 200, 1, tas2781_digital_getvol,
		tas2781_digital_putvol, dvc_tlv),
	ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 0", 0,
		tas2781_force_fwload_get, tas2781_force_fwload_put),
	ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 1", TAS2781_AMP_LEVEL,
		1, 0, 20, 0, tas2781_amp_getvol,
		tas2781_amp_putvol, amp_vol_tlv),
	ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 1", TAS2781_DVC_LVL,
		0, 0, 200, 1, tas2781_digital_getvol,
		tas2781_digital_putvol, dvc_tlv),
	ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 1", 0,
		tas2781_force_fwload_get, tas2781_force_fwload_put),
};

static const struct snd_kcontrol_new tas2781_prof_ctrl[] = {
{
	.name = "Speaker Profile Id - 0",
	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
	.info = tasdevice_info_profile,
	.get = tasdevice_get_profile_id,
	.put = tasdevice_set_profile_id,
},
{
	.name = "Speaker Profile Id - 1",
	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
	.info = tasdevice_info_profile,
	.get = tasdevice_get_profile_id,
	.put = tasdevice_set_profile_id,
},
};
static const struct snd_kcontrol_new tas2781_dsp_prog_ctrl[] = {
{
	.name = "Speaker Program Id 0",
	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
	.info = tasdevice_info_programs,
	.get = tasdevice_program_get,
	.put = tasdevice_program_put,
},
{
	.name = "Speaker Program Id 1",
	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
	.info = tasdevice_info_programs,
	.get = tasdevice_program_get,
	.put = tasdevice_program_put,
},
};

static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl[] = {
{
	.name = "Speaker Config Id 0",
	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
	.info = tasdevice_info_config,
	.get = tasdevice_config_get,
	.put = tasdevice_config_put,
},
{
	.name = "Speaker Config Id 1",
	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
	.info = tasdevice_info_config,
	.get = tasdevice_config_get,
	.put = tasdevice_config_put,
},
};

static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
{
	int i, rc;

	/*
	 * If no calibration data exist in tasdevice_priv *tas_priv,
	 * calibration apply will be ignored, and use default values
	 * in firmware binary, which was loaded during firmware download.
	 */
	if (tas_priv->cali_data[0] == 0)
		return;
	/*
	 * Calibration data was saved in tasdevice_priv *tas_priv as:
	 * unsigned int cali_data[CALIB_MAX];
	 * and every data (in 4 bytes) will be saved in register which in
	 * book 0, and page number in page_array[], offset was saved in
	 * rgno_array[].
	 */
	for (i = 0; i < CALIB_MAX; i++) {
		rc = tasdevice_spi_dev_bulk_write(tas_priv,
			tas_priv->cali_reg_array[i],
			(unsigned char *)&tas_priv->cali_data[i], 4);
		if (rc < 0)
			dev_err(tas_priv->dev,
				"chn %d calib %d bulk_wr err = %d\n",
				tas_priv->index, i, rc);
	}
}

/*
 * Update the calibration data, including speaker impedance, f0, etc,
 * into algo. Calibrate data is done by manufacturer in the factory.
 * These data are used by Algo for calculating the speaker temperature,
 * speaker membrane excursion and f0 in real time during playback.
 * Calibration data format in EFI is V2, since 2024.
 */
static int tas2781_save_calibration(struct tasdevice_priv *tas_priv)
{
	/*
	 * GUID was used for data access in BIOS, it was provided by board
	 * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}"
	 */
	efi_guid_t efi_guid =
		EFI_GUID(0x02f9af02, 0x7734, 0x4233,
			 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3);
	static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME;
	unsigned char data[TASDEVICE_CALIBRATION_DATA_SIZE], *buf;
	unsigned int attr, crc, offset, *tmp_val;
	struct tm *tm = &tas_priv->tm;
	unsigned long total_sz = 0;
	efi_status_t status;

	tas_priv->cali_data[0] = 0;
	status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, data);
	if (status == EFI_BUFFER_TOO_SMALL) {
		if (total_sz > TASDEVICE_CALIBRATION_DATA_SIZE)
			return -ENOMEM;
		/* Get variable contents into buffer */
		status = efi.get_variable(efi_name, &efi_guid, &attr,
			&total_sz, data);
	}
	if (status != EFI_SUCCESS)
		return status;

	tmp_val = (unsigned int *)data;
	if (tmp_val[0] == 2781) {
		/*
		 * New features were added in calibrated Data V3:
		 *     1. Added calibration registers address define in
		 *     a node, marked as Device id == 0x80.
		 * New features were added in calibrated Data V2:
		 *     1. Added some the fields to store the link_id and
		 *     uniqie_id for multi-link solutions
		 *     2. Support flexible number of devices instead of
		 *     fixed one in V1.
		 * Layout of calibrated data V2 in UEFI(total 256 bytes):
		 *     ChipID (2781, 4 bytes)
		 *     Device-Sum (4 bytes)
		 *     TimeStamp of Calibration (4 bytes)
		 *     for (i = 0; i < Device-Sum; i++) {
		 *             Device #i index_info () {
		 *                     SDW link id (2bytes)
		 *                     SDW unique_id (2bytes)
		 *             } // if Device number is 0x80, mean it's
		 *                  calibration registers address.
		 *             Calibrated Data of Device #i (20 bytes)
		 *     }
		 *     CRC (4 bytes)
		 *     Reserved (the rest)
		 */
		crc = crc32(~0, data, (3 + tmp_val[1] * 6) * 4) ^ ~0;

		if (crc != tmp_val[3 + tmp_val[1] * 6])
			return 0;

		time64_to_tm(tmp_val[2], 0, tm);
		for (int j = 0; j < tmp_val[1]; j++) {
			offset = j * 6 + 3;
			if (tmp_val[offset] == tas_priv->index) {
				for (int i = 0; i < CALIB_MAX; i++)
					tas_priv->cali_data[i] =
					tmp_val[offset + i + 1];
			} else if (tmp_val[offset] ==
				   TASDEVICE_CALIBRATION_REG_ADDRESS) {
				for (int i = 0; i < CALIB_MAX; i++) {
					buf = &data[(offset + i + 1) * 4];
					tas_priv->cali_reg_array[i] =
						TASDEVICE_REG(buf[1], buf[2],
						      buf[3]);
				}
			}
			tas_priv->apply_calibration(tas_priv);
		}
	} else {
		/*
		 * Calibration data is in V1 format.
		 * struct cali_data {
		 *      char cali_data[20];
		 * }
		 *
		 * struct {
		 *      struct cali_data cali_data[4];
		 *      int  TimeStamp of Calibration (4 bytes)
		 *      int CRC (4 bytes)
		 * } ueft;
		 */
		crc = crc32(~0, data, 84) ^ ~0;
		if (crc == tmp_val[21]) {
			time64_to_tm(tmp_val[20], 0, tm);
			for (int i = 0; i < CALIB_MAX; i++)
				tas_priv->cali_data[i] =
					tmp_val[tas_priv->index * 5 + i];
			tas_priv->apply_calibration(tas_priv);
		}
	}

	return 0;
}

static void tas2781_hda_remove_controls(struct tas2781_hda *tas_hda)
{
	struct hda_codec *codec = tas_hda->priv->codec;

	snd_ctl_remove(codec->card, tas_hda->dsp_prog_ctl);

	snd_ctl_remove(codec->card, tas_hda->dsp_conf_ctl);

	for (int i = ARRAY_SIZE(tas_hda->snd_ctls) - 1; i >= 0; i--)
		snd_ctl_remove(codec->card, tas_hda->snd_ctls[i]);

	snd_ctl_remove(codec->card, tas_hda->prof_ctl);
}

static void tasdev_fw_ready(const struct firmware *fmw, void *context)
{
	struct tasdevice_priv *tas_priv = context;
	struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev);
	struct hda_codec *codec = tas_priv->codec;
	int i, j, ret, val;

	pm_runtime_get_sync(tas_priv->dev);
	guard(mutex)(&tas_priv->codec_lock);

	ret = tasdevice_spi_rca_parser(tas_priv, fmw);
	if (ret)
		goto out;

	/* Add control one time only. */
	tas_hda->prof_ctl = snd_ctl_new1(&tas2781_prof_ctrl[tas_priv->index],
		tas_priv);
	ret = snd_ctl_add(codec->card, tas_hda->prof_ctl);
	if (ret) {
		dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n",
			tas2781_prof_ctrl[tas_priv->index].name, ret);
		goto out;
	}
	j = tas_priv->index * ARRAY_SIZE(tas2781_snd_controls) / 2;
	for (i = 0; i < 3; i++) {
		tas_hda->snd_ctls[i] = snd_ctl_new1(&tas2781_snd_controls[i+j],
			tas_priv);
		ret = snd_ctl_add(codec->card, tas_hda->snd_ctls[i]);
		if (ret) {
			dev_err(tas_priv->dev,
				"Failed to add KControl %s = %d\n",
				tas2781_snd_controls[i+tas_priv->index*3].name,
				ret);
			goto out;
		}
	}

	tasdevice_spi_dsp_remove(tas_priv);

	tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
	scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%08X-%01d.bin",
		codec->core.subsystem_id, tas_priv->index);
	ret = tasdevice_spi_dsp_parser(tas_priv);
	if (ret) {
		dev_err(tas_priv->dev, "dspfw load %s error\n",
			tas_priv->coef_binaryname);
		tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
		goto out;
	}

	/* Add control one time only. */
	tas_hda->dsp_prog_ctl =
		snd_ctl_new1(&tas2781_dsp_prog_ctrl[tas_priv->index],
			     tas_priv);
	ret = snd_ctl_add(codec->card, tas_hda->dsp_prog_ctl);
	if (ret) {
		dev_err(tas_priv->dev,
			"Failed to add KControl %s = %d\n",
			tas2781_dsp_prog_ctrl[tas_priv->index].name, ret);
		goto out;
	}

	tas_hda->dsp_conf_ctl =
		snd_ctl_new1(&tas2781_dsp_conf_ctrl[tas_priv->index],
			     tas_priv);
	ret = snd_ctl_add(codec->card, tas_hda->dsp_conf_ctl);
	if (ret) {
		dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n",
			tas2781_dsp_conf_ctrl[tas_priv->index].name, ret);
		goto out;
	}

	/* Perform AMP reset before firmware download. */
	tas_priv->rcabin.profile_cfg_id = TAS2781_PRE_POST_RESET_CFG;
	tas2781_spi_reset(tas_priv);
	tas_priv->rcabin.profile_cfg_id = 0;

	tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
	ret = tasdevice_spi_dev_read(tas_priv, TAS2781_REG_CLK_CONFIG, &val);
	if (ret < 0)
		goto out;

	if (val == TAS2781_REG_CLK_CONFIG_RESET)
		ret = tasdevice_spi_prmg_load(tas_priv, 0);
	if (ret < 0) {
		dev_err(tas_priv->dev, "FW download failed = %d\n", ret);
		goto out;
	}
	if (tas_priv->fmw->nr_programs > 0)
		tas_priv->cur_prog = 0;
	if (tas_priv->fmw->nr_configurations > 0)
		tas_priv->cur_conf = 0;

	/*
	 * If calibrated data occurs error, dsp will still works with default
	 * calibrated data inside algo.
	 */

out:
	if (fmw)
		release_firmware(fmw);
	pm_runtime_mark_last_busy(tas_hda->priv->dev);
	pm_runtime_put_autosuspend(tas_hda->priv->dev);
}

static int tas2781_hda_bind(struct device *dev, struct device *master,
	void *master_data)
{
	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
	struct hda_component_parent *parent = master_data;
	struct hda_component *comp;
	struct hda_codec *codec;
	int ret;

	comp = hda_component_from_index(parent, tas_hda->priv->index);
	if (!comp)
		return -EINVAL;

	if (comp->dev)
		return -EBUSY;

	codec = parent->codec;

	pm_runtime_get_sync(dev);

	comp->dev = dev;

	strscpy(comp->name, dev_name(dev), sizeof(comp->name));

	ret = tascodec_spi_init(tas_hda->priv, codec, THIS_MODULE,
		tasdev_fw_ready);
	if (!ret)
		comp->playback_hook = tas2781_hda_playback_hook;

	pm_runtime_mark_last_busy(dev);
	pm_runtime_put_autosuspend(dev);

	return ret;
}

static void tas2781_hda_unbind(struct device *dev, struct device *master,
			       void *master_data)
{
	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
	struct hda_component_parent *parent = master_data;
	struct hda_component *comp;

	comp = hda_component_from_index(parent, tas_hda->priv->index);
	if (comp && (comp->dev == dev)) {
		comp->dev = NULL;
		memset(comp->name, 0, sizeof(comp->name));
		comp->playback_hook = NULL;
	}

	tas2781_hda_remove_controls(tas_hda);

	tasdevice_spi_config_info_remove(tas_hda->priv);
	tasdevice_spi_dsp_remove(tas_hda->priv);

	tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING;
}

static const struct component_ops tas2781_hda_comp_ops = {
	.bind = tas2781_hda_bind,
	.unbind = tas2781_hda_unbind,
};

static void tas2781_hda_remove(struct device *dev)
{
	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);

	component_del(tas_hda->priv->dev, &tas2781_hda_comp_ops);

	pm_runtime_get_sync(tas_hda->priv->dev);
	pm_runtime_disable(tas_hda->priv->dev);

	pm_runtime_put_noidle(tas_hda->priv->dev);

	mutex_destroy(&tas_hda->priv->codec_lock);
}

static int tas2781_hda_spi_probe(struct spi_device *spi)
{
	struct tasdevice_priv *tas_priv;
	struct tas2781_hda *tas_hda;
	const char *device_name;
	int ret = 0;

	tas_hda = devm_kzalloc(&spi->dev, sizeof(*tas_hda), GFP_KERNEL);
	if (!tas_hda)
		return -ENOMEM;

	spi->max_speed_hz = TAS2781_SPI_MAX_FREQ;

	tas_priv = devm_kzalloc(&spi->dev, sizeof(*tas_priv), GFP_KERNEL);
	if (!tas_priv)
		return -ENOMEM;
	tas_priv->dev = &spi->dev;
	tas_hda->priv = tas_priv;
	tas_priv->regmap = devm_regmap_init_spi(spi, &tasdevice_regmap);
	if (IS_ERR(tas_priv->regmap)) {
		ret = PTR_ERR(tas_priv->regmap);
		dev_err(tas_priv->dev, "Failed to allocate regmap: %d\n",
			ret);
		return ret;
	}
	if (strstr(dev_name(&spi->dev), "TXNW2781")) {
		device_name = "TXNW2781";
		tas_priv->save_calibration = tas2781_save_calibration;
		tas_priv->apply_calibration = tas2781_apply_calib;
	} else {
		dev_err(tas_priv->dev, "Unmatched spi dev %s\n",
			dev_name(&spi->dev));
		return -ENODEV;
	}

	tas_priv->irq = spi->irq;
	dev_set_drvdata(&spi->dev, tas_hda);
	ret = tas2781_read_acpi(tas_hda, device_name,
				spi_get_chipselect(spi, 0));
	if (ret)
		return dev_err_probe(tas_priv->dev, ret,
				     "Platform not supported\n");

	tasdevice_spi_init(tas_priv);

	ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops);
	if (ret) {
		dev_err(tas_priv->dev, "Register component fail: %d\n", ret);
		return ret;
	}

	pm_runtime_set_autosuspend_delay(tas_priv->dev, 3000);
	pm_runtime_use_autosuspend(tas_priv->dev);
	pm_runtime_mark_last_busy(tas_priv->dev);
	pm_runtime_set_active(tas_priv->dev);
	pm_runtime_get_noresume(tas_priv->dev);
	pm_runtime_enable(tas_priv->dev);

	pm_runtime_put_autosuspend(tas_priv->dev);

	return 0;
}

static void tas2781_hda_spi_remove(struct spi_device *spi)
{
	tas2781_hda_remove(&spi->dev);
}

static int tas2781_runtime_suspend(struct device *dev)
{
	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);

	guard(mutex)(&tas_hda->priv->codec_lock);

	if (tas_hda->priv->playback_started)
		tasdevice_spi_tuning_switch(tas_hda->priv, 1);

	tas_hda->priv->cur_book = -1;
	tas_hda->priv->cur_conf = -1;

	return 0;
}

static int tas2781_runtime_resume(struct device *dev)
{
	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);

	guard(mutex)(&tas_hda->priv->codec_lock);

	if (tas_hda->priv->playback_started)
		tasdevice_spi_tuning_switch(tas_hda->priv, 0);

	return 0;
}

static int tas2781_system_suspend(struct device *dev)
{
	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
	int ret;

	ret = pm_runtime_force_suspend(dev);
	if (ret)
		return ret;

	/* Shutdown chip before system suspend */
	if (tas_hda->priv->playback_started)
		tasdevice_spi_tuning_switch(tas_hda->priv, 1);

	return 0;
}

static int tas2781_system_resume(struct device *dev)
{
	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
	int ret, val;

	ret = pm_runtime_force_resume(dev);
	if (ret)
		return ret;

	guard(mutex)(&tas_hda->priv->codec_lock);
	ret = tasdevice_spi_dev_read(tas_hda->priv, TAS2781_REG_CLK_CONFIG,
				     &val);
	if (ret < 0)
		return ret;

	if (val == TAS2781_REG_CLK_CONFIG_RESET) {
		tas_hda->priv->cur_book = -1;
		tas_hda->priv->cur_conf = -1;
		tas_hda->priv->cur_prog = -1;

		ret = tasdevice_spi_prmg_load(tas_hda->priv, 0);
		if (ret < 0) {
			dev_err(tas_hda->priv->dev,
				"FW download failed = %d\n", ret);
			return ret;
		}

		if (tas_hda->priv->playback_started)
			tasdevice_spi_tuning_switch(tas_hda->priv, 0);
	}

	return ret;
}

static const struct dev_pm_ops tas2781_hda_pm_ops = {
	RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL)
	SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume)
};

static const struct spi_device_id tas2781_hda_spi_id[] = {
	{ "tas2781-hda", },
	{}
};

static const struct acpi_device_id tas2781_acpi_hda_match[] = {
	{"TXNW2781", },
	{}
};
MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match);

static struct spi_driver tas2781_hda_spi_driver = {
	.driver = {
		.name		= "tas2781-hda",
		.acpi_match_table = tas2781_acpi_hda_match,
		.pm		= &tas2781_hda_pm_ops,
	},
	.id_table	= tas2781_hda_spi_id,
	.probe		= tas2781_hda_spi_probe,
	.remove		= tas2781_hda_spi_remove,
};
module_spi_driver(tas2781_hda_spi_driver);

MODULE_DESCRIPTION("TAS2781 HDA SPI Driver");
MODULE_AUTHOR("Baojun, Xu, <baojun.xug@ti.com>");
MODULE_LICENSE("GPL");