mirror of
git://git.yoctoproject.org/linux-yocto.git
synced 2025-07-09 23:35:22 +02:00

Aspeed always report the display port as "connected", because it doesn't set a .detect_ctx callback. Fix this by providing the proper detect callback for astdp and dp501. This also fixes the following regression: Since commitfae7d18640
("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the remote BMC resolution to 640x480, which is inconvenient, and breaks the anaconda installer. v2: Add .detect callback to the dp/dp501 connector (Jani Nikula) v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann) Add a BMC virtual connector v4: Better indent detect_ctx() functions (Thomas Zimmermann) v5: Enable polling of the dp and dp501 connector status (Thomas Zimmermann) v6: Change check order in ast_astdp_is_connected (Jammy Huang) Fixes:fae7d18640
("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-2-jfalempe@redhat.com
473 lines
10 KiB
C
473 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "ast_drv.h"
|
|
|
|
MODULE_FIRMWARE("ast_dp501_fw.bin");
|
|
|
|
static void ast_release_firmware(void *data)
|
|
{
|
|
struct ast_device *ast = data;
|
|
|
|
release_firmware(ast->dp501_fw);
|
|
ast->dp501_fw = NULL;
|
|
}
|
|
|
|
static int ast_load_dp501_microcode(struct drm_device *dev)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
int ret;
|
|
|
|
ret = request_firmware(&ast->dp501_fw, "ast_dp501_fw.bin", dev->dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_add_action_or_reset(dev->dev, ast_release_firmware, ast);
|
|
}
|
|
|
|
static void send_ack(struct ast_device *ast)
|
|
{
|
|
u8 sendack;
|
|
sendack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0xff);
|
|
sendack |= 0x80;
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0x00, sendack);
|
|
}
|
|
|
|
static void send_nack(struct ast_device *ast)
|
|
{
|
|
u8 sendack;
|
|
sendack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0xff);
|
|
sendack &= ~0x80;
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0x00, sendack);
|
|
}
|
|
|
|
static bool wait_ack(struct ast_device *ast)
|
|
{
|
|
u8 waitack;
|
|
u32 retry = 0;
|
|
do {
|
|
waitack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
|
|
waitack &= 0x80;
|
|
udelay(100);
|
|
} while ((!waitack) && (retry++ < 1000));
|
|
|
|
if (retry < 1000)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static bool wait_nack(struct ast_device *ast)
|
|
{
|
|
u8 waitack;
|
|
u32 retry = 0;
|
|
do {
|
|
waitack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
|
|
waitack &= 0x80;
|
|
udelay(100);
|
|
} while ((waitack) && (retry++ < 1000));
|
|
|
|
if (retry < 1000)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static void set_cmd_trigger(struct ast_device *ast)
|
|
{
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, ~0x40, 0x40);
|
|
}
|
|
|
|
static void clear_cmd_trigger(struct ast_device *ast)
|
|
{
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, ~0x40, 0x00);
|
|
}
|
|
|
|
#if 0
|
|
static bool wait_fw_ready(struct ast_device *ast)
|
|
{
|
|
u8 waitready;
|
|
u32 retry = 0;
|
|
do {
|
|
waitready = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
|
|
waitready &= 0x40;
|
|
udelay(100);
|
|
} while ((!waitready) && (retry++ < 1000));
|
|
|
|
if (retry < 1000)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
#endif
|
|
|
|
static bool ast_write_cmd(struct drm_device *dev, u8 data)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
int retry = 0;
|
|
if (wait_nack(ast)) {
|
|
send_nack(ast);
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, data);
|
|
send_ack(ast);
|
|
set_cmd_trigger(ast);
|
|
do {
|
|
if (wait_ack(ast)) {
|
|
clear_cmd_trigger(ast);
|
|
send_nack(ast);
|
|
return true;
|
|
}
|
|
} while (retry++ < 100);
|
|
}
|
|
clear_cmd_trigger(ast);
|
|
send_nack(ast);
|
|
return false;
|
|
}
|
|
|
|
static bool ast_write_data(struct drm_device *dev, u8 data)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
|
|
if (wait_nack(ast)) {
|
|
send_nack(ast);
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, data);
|
|
send_ack(ast);
|
|
if (wait_ack(ast)) {
|
|
send_nack(ast);
|
|
return true;
|
|
}
|
|
}
|
|
send_nack(ast);
|
|
return false;
|
|
}
|
|
|
|
#if 0
|
|
static bool ast_read_data(struct drm_device *dev, u8 *data)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
u8 tmp;
|
|
|
|
*data = 0;
|
|
|
|
if (wait_ack(ast) == false)
|
|
return false;
|
|
tmp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd3, 0xff);
|
|
*data = tmp;
|
|
if (wait_nack(ast) == false) {
|
|
send_nack(ast);
|
|
return false;
|
|
}
|
|
send_nack(ast);
|
|
return true;
|
|
}
|
|
|
|
static void clear_cmd(struct ast_device *ast)
|
|
{
|
|
send_nack(ast);
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, 0x00);
|
|
}
|
|
#endif
|
|
|
|
void ast_set_dp501_video_output(struct drm_device *dev, u8 mode)
|
|
{
|
|
ast_write_cmd(dev, 0x40);
|
|
ast_write_data(dev, mode);
|
|
|
|
msleep(10);
|
|
}
|
|
|
|
static u32 get_fw_base(struct ast_device *ast)
|
|
{
|
|
return ast_mindwm(ast, 0x1e6e2104) & 0x7fffffff;
|
|
}
|
|
|
|
bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
u32 i, data;
|
|
u32 boot_address;
|
|
|
|
if (ast->config_mode != ast_use_p2a)
|
|
return false;
|
|
|
|
data = ast_mindwm(ast, 0x1e6e2100) & 0x01;
|
|
if (data) {
|
|
boot_address = get_fw_base(ast);
|
|
for (i = 0; i < size; i += 4)
|
|
*(u32 *)(addr + i) = ast_mindwm(ast, boot_address + i);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool ast_launch_m68k(struct drm_device *dev)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
u32 i, data, len = 0;
|
|
u32 boot_address;
|
|
u8 *fw_addr = NULL;
|
|
u8 jreg;
|
|
|
|
if (ast->config_mode != ast_use_p2a)
|
|
return false;
|
|
|
|
data = ast_mindwm(ast, 0x1e6e2100) & 0x01;
|
|
if (!data) {
|
|
|
|
if (ast->dp501_fw_addr) {
|
|
fw_addr = ast->dp501_fw_addr;
|
|
len = 32*1024;
|
|
} else {
|
|
if (!ast->dp501_fw &&
|
|
ast_load_dp501_microcode(dev) < 0)
|
|
return false;
|
|
|
|
fw_addr = (u8 *)ast->dp501_fw->data;
|
|
len = ast->dp501_fw->size;
|
|
}
|
|
/* Get BootAddress */
|
|
ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8);
|
|
data = ast_mindwm(ast, 0x1e6e0004);
|
|
switch (data & 0x03) {
|
|
case 0:
|
|
boot_address = 0x44000000;
|
|
break;
|
|
default:
|
|
case 1:
|
|
boot_address = 0x48000000;
|
|
break;
|
|
case 2:
|
|
boot_address = 0x50000000;
|
|
break;
|
|
case 3:
|
|
boot_address = 0x60000000;
|
|
break;
|
|
}
|
|
boot_address -= 0x200000; /* -2MB */
|
|
|
|
/* copy image to buffer */
|
|
for (i = 0; i < len; i += 4) {
|
|
data = *(u32 *)(fw_addr + i);
|
|
ast_moutdwm(ast, boot_address + i, data);
|
|
}
|
|
|
|
/* Init SCU */
|
|
ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8);
|
|
|
|
/* Launch FW */
|
|
ast_moutdwm(ast, 0x1e6e2104, 0x80000000 + boot_address);
|
|
ast_moutdwm(ast, 0x1e6e2100, 1);
|
|
|
|
/* Update Scratch */
|
|
data = ast_mindwm(ast, 0x1e6e2040) & 0xfffff1ff; /* D[11:9] = 100b: UEFI handling */
|
|
data |= 0x800;
|
|
ast_moutdwm(ast, 0x1e6e2040, data);
|
|
|
|
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x99, 0xfc); /* D[1:0]: Reserved Video Buffer */
|
|
jreg |= 0x02;
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x99, jreg);
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool ast_dp501_is_connected(struct ast_device *ast)
|
|
{
|
|
u32 boot_address, offset, data;
|
|
|
|
if (ast->config_mode == ast_use_p2a) {
|
|
boot_address = get_fw_base(ast);
|
|
|
|
/* validate FW version */
|
|
offset = AST_DP501_GBL_VERSION;
|
|
data = ast_mindwm(ast, boot_address + offset);
|
|
if ((data & AST_DP501_FW_VERSION_MASK) != AST_DP501_FW_VERSION_1)
|
|
return false;
|
|
|
|
/* validate PnP Monitor */
|
|
offset = AST_DP501_PNPMONITOR;
|
|
data = ast_mindwm(ast, boot_address + offset);
|
|
if (!(data & AST_DP501_PNP_CONNECTED))
|
|
return false;
|
|
} else {
|
|
if (!ast->dp501_fw_buf)
|
|
return false;
|
|
|
|
/* dummy read */
|
|
offset = 0x0000;
|
|
data = readl(ast->dp501_fw_buf + offset);
|
|
|
|
/* validate FW version */
|
|
offset = AST_DP501_GBL_VERSION;
|
|
data = readl(ast->dp501_fw_buf + offset);
|
|
if ((data & AST_DP501_FW_VERSION_MASK) != AST_DP501_FW_VERSION_1)
|
|
return false;
|
|
|
|
/* validate PnP Monitor */
|
|
offset = AST_DP501_PNPMONITOR;
|
|
data = readl(ast->dp501_fw_buf + offset);
|
|
if (!(data & AST_DP501_PNP_CONNECTED))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
u32 i, boot_address, offset, data;
|
|
u32 *pEDIDidx;
|
|
|
|
if (!ast_dp501_is_connected(ast))
|
|
return false;
|
|
|
|
if (ast->config_mode == ast_use_p2a) {
|
|
boot_address = get_fw_base(ast);
|
|
|
|
/* Read EDID */
|
|
offset = AST_DP501_EDID_DATA;
|
|
for (i = 0; i < 128; i += 4) {
|
|
data = ast_mindwm(ast, boot_address + offset + i);
|
|
pEDIDidx = (u32 *)(ediddata + i);
|
|
*pEDIDidx = data;
|
|
}
|
|
} else {
|
|
/* Read EDID */
|
|
offset = AST_DP501_EDID_DATA;
|
|
for (i = 0; i < 128; i += 4) {
|
|
data = readl(ast->dp501_fw_buf + offset + i);
|
|
pEDIDidx = (u32 *)(ediddata + i);
|
|
*pEDIDidx = data;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool ast_init_dvo(struct drm_device *dev)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
u8 jreg;
|
|
u32 data;
|
|
ast_write32(ast, 0xf004, 0x1e6e0000);
|
|
ast_write32(ast, 0xf000, 0x1);
|
|
ast_write32(ast, 0x12000, 0x1688a8a8);
|
|
|
|
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
|
|
if (!(jreg & 0x80)) {
|
|
/* Init SCU DVO Settings */
|
|
data = ast_read32(ast, 0x12008);
|
|
/* delay phase */
|
|
data &= 0xfffff8ff;
|
|
data |= 0x00000500;
|
|
ast_write32(ast, 0x12008, data);
|
|
|
|
if (IS_AST_GEN4(ast)) {
|
|
data = ast_read32(ast, 0x12084);
|
|
/* multi-pins for DVO single-edge */
|
|
data |= 0xfffe0000;
|
|
ast_write32(ast, 0x12084, data);
|
|
|
|
data = ast_read32(ast, 0x12088);
|
|
/* multi-pins for DVO single-edge */
|
|
data |= 0x000fffff;
|
|
ast_write32(ast, 0x12088, data);
|
|
|
|
data = ast_read32(ast, 0x12090);
|
|
/* multi-pins for DVO single-edge */
|
|
data &= 0xffffffcf;
|
|
data |= 0x00000020;
|
|
ast_write32(ast, 0x12090, data);
|
|
} else { /* AST GEN5+ */
|
|
data = ast_read32(ast, 0x12088);
|
|
/* multi-pins for DVO single-edge */
|
|
data |= 0x30000000;
|
|
ast_write32(ast, 0x12088, data);
|
|
|
|
data = ast_read32(ast, 0x1208c);
|
|
/* multi-pins for DVO single-edge */
|
|
data |= 0x000000cf;
|
|
ast_write32(ast, 0x1208c, data);
|
|
|
|
data = ast_read32(ast, 0x120a4);
|
|
/* multi-pins for DVO single-edge */
|
|
data |= 0xffff0000;
|
|
ast_write32(ast, 0x120a4, data);
|
|
|
|
data = ast_read32(ast, 0x120a8);
|
|
/* multi-pins for DVO single-edge */
|
|
data |= 0x0000000f;
|
|
ast_write32(ast, 0x120a8, data);
|
|
|
|
data = ast_read32(ast, 0x12094);
|
|
/* multi-pins for DVO single-edge */
|
|
data |= 0x00000002;
|
|
ast_write32(ast, 0x12094, data);
|
|
}
|
|
}
|
|
|
|
/* Force to DVO */
|
|
data = ast_read32(ast, 0x1202c);
|
|
data &= 0xfffbffff;
|
|
ast_write32(ast, 0x1202c, data);
|
|
|
|
/* Init VGA DVO Settings */
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x80);
|
|
return true;
|
|
}
|
|
|
|
|
|
static void ast_init_analog(struct drm_device *dev)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
u32 data;
|
|
|
|
/*
|
|
* Set DAC source to VGA mode in SCU2C via the P2A
|
|
* bridge. First configure the P2U to target the SCU
|
|
* in case it isn't at this stage.
|
|
*/
|
|
ast_write32(ast, 0xf004, 0x1e6e0000);
|
|
ast_write32(ast, 0xf000, 0x1);
|
|
|
|
/* Then unlock the SCU with the magic password */
|
|
ast_write32(ast, 0x12000, 0x1688a8a8);
|
|
ast_write32(ast, 0x12000, 0x1688a8a8);
|
|
ast_write32(ast, 0x12000, 0x1688a8a8);
|
|
|
|
/* Finally, clear bits [17:16] of SCU2c */
|
|
data = ast_read32(ast, 0x1202c);
|
|
data &= 0xfffcffff;
|
|
ast_write32(ast, 0, data);
|
|
|
|
/* Disable DVO */
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x00);
|
|
}
|
|
|
|
void ast_init_3rdtx(struct drm_device *dev)
|
|
{
|
|
struct ast_device *ast = to_ast_device(dev);
|
|
u8 jreg;
|
|
|
|
if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast)) {
|
|
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
|
|
switch (jreg & 0x0e) {
|
|
case 0x04:
|
|
ast_init_dvo(dev);
|
|
break;
|
|
case 0x08:
|
|
ast_launch_m68k(dev);
|
|
break;
|
|
case 0x0c:
|
|
ast_init_dvo(dev);
|
|
break;
|
|
default:
|
|
if (ast->tx_chip_types & BIT(AST_TX_SIL164))
|
|
ast_init_dvo(dev);
|
|
else
|
|
ast_init_analog(dev);
|
|
}
|
|
}
|
|
}
|